hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

kernel: bump 4.14 to 4.14.88 

Refreshed all patches.

Altered patches:
- 180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Fixes CVE:
- CVE-2018-14625

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
openwrt-18.06
Koen Vandeputte 2018-12-13 11:46:02 +01:00
parent 85f42a74d3
commit 40e1450f59
6 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@ -3,10 +3,10 @@
LINUX_RELEASE?=1
LINUX_VERSION-4.9 = .145
LINUX_VERSION-4.14 = .87
LINUX_VERSION-4.14 = .88
LINUX_KERNEL_HASH-4.9.145 = 6901ca37e8c305a2f26c598952338b4dc2481ca5a9d0bf71e2b71730a5b5bc5e
LINUX_KERNEL_HASH-4.14.87 = 36744d7d657dab23e455a8096e4ad2dc6a25f25fdce062d8a8bdf4499112e125
LINUX_KERNEL_HASH-4.14.88 = b0f0b8c76708eab6caf3009702e531d40a243b152922ee1f9a441316f226f52d
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

6
target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
View File

@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
#include "xhci.h"
#include "xhci-trace.h"
@@ -262,6 +264,458 @@ static void xhci_pme_acpi_rtd3_enable(st
@@ -266,6 +268,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -297,6 +751,22 @@ static int xhci_pci_probe(struct pci_dev
@@ -301,6 +755,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
driver = (struct hc_driver *)id->driver_data;
/* For some HW implementation, a XHCI reset is just not enough... */
@@ -361,6 +831,16 @@ static void xhci_pci_remove(struct pci_d
@@ -365,6 +835,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;

4
target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch
View File

@ -13,7 +13,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -215,7 +215,7 @@ static void xhci_pci_quirks(struct devic
@@ -219,7 +219,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)
@ -44,7 +44,7 @@ produce a noisy warning.
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1857,6 +1857,7 @@ struct xhci_hcd {
@@ -1858,6 +1858,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */

6
target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
View File

@ -127,11 +127,11 @@ it on BCM4708 family.
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1839,6 +1839,7 @@ struct xhci_hcd {
#define XHCI_SUSPEND_DELAY BIT_ULL(30)
@@ -1840,6 +1840,7 @@ struct xhci_hcd {
#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
+#define XHCI_FAKE_DOORBELL BIT_ULL(35)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
+#define XHCI_FAKE_DOORBELL BIT_ULL(36)
unsigned int num_active_eps;
unsigned int limit_active_eps;

2
target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
View File

@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6151,7 +6151,7 @@ static void __ref alloc_node_mem_map(str
@@ -6141,7 +6141,7 @@ static void __ref alloc_node_mem_map(str
mem_map = NODE_DATA(0)->node_mem_map;
#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
if (page_to_pfn(mem_map) != pgdat->node_start_pfn)

2
target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch
View File

@ -86,7 +86,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if (!xhci->shared_hcd) {
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -273,6 +273,9 @@ static int xhci_pci_setup(struct usb_hcd
@@ -277,6 +277,9 @@ static int xhci_pci_setup(struct usb_hcd
if (!xhci->sbrn)
pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);