imx6: update PCIe driver

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38080
lede-17.01
Luka Perkov 2013-09-20 01:59:32 +00:00
parent 19bd25f4ec
commit 3f059f58db
11 changed files with 1656 additions and 96 deletions

View File

@ -20,7 +20,6 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SUNXI is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARCH_VIRT is not set
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
@ -171,7 +170,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_IMX=y
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX_DMA is not set
CONFIG_IMX_PCIE=y
# CONFIG_IMX_SDMA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
@ -190,6 +188,7 @@ CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MACH_MX51_BABBAGE is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_MXC is not set
@ -244,7 +243,9 @@ CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_DW=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_IMX6=y
CONFIG_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y

View File

@ -271,8 +271,7 @@
};
&pcie {
rst-gpios = <&gpio1 29 0>; /* PCIESWT_RST# */
clken-gpios = <&gpio1 20 0>; /* not used */
reset-gpios = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */

View File

@ -0,0 +1,565 @@
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/types.h>
#include "pcie-designware.h"
/* Synopsis specific PCIE configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
static struct hw_pci dw_pci;
unsigned long global_io_offset;
static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
{
return sys->private_data;
}
int cfg_read(void __iomem *addr, int where, int size, u32 *val)
{
*val = readl(addr);
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
else if (size == 2)
*val = (*val >> (8 * (where & 3))) & 0xffff;
else if (size != 4)
return PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_SUCCESSFUL;
}
int cfg_write(void __iomem *addr, int where, int size, u32 val)
{
if (size == 4)
writel(val, addr);
else if (size == 2)
writew(val, addr + (where & 2));
else if (size == 1)
writeb(val, addr + (where & 3));
else
return PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_SUCCESSFUL;
}
static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val)
{
if (pp->ops->readl_rc)
pp->ops->readl_rc(pp, pp->dbi_base + reg, val);
else
*val = readl(pp->dbi_base + reg);
}
static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
{
if (pp->ops->writel_rc)
pp->ops->writel_rc(pp, val, pp->dbi_base + reg);
else
writel(val, pp->dbi_base + reg);
}
int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
u32 *val)
{
int ret;
if (pp->ops->rd_own_conf)
ret = pp->ops->rd_own_conf(pp, where, size, val);
else
ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val);
return ret;
}
int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
u32 val)
{
int ret;
if (pp->ops->wr_own_conf)
ret = pp->ops->wr_own_conf(pp, where, size, val);
else
ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size,
val);
return ret;
}
int dw_pcie_link_up(struct pcie_port *pp)
{
if (pp->ops->link_up)
return pp->ops->link_up(pp);
else
return 0;
}
int __init dw_pcie_host_init(struct pcie_port *pp)
{
struct device_node *np = pp->dev->of_node;
struct of_pci_range range;
struct of_pci_range_parser parser;
u32 val;
if (of_pci_range_parser_init(&parser, np)) {
dev_err(pp->dev, "missing ranges property\n");
return -EINVAL;
}
/* Get the I/O and memory ranges from DT */
for_each_of_pci_range(&parser, &range) {
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
if (restype == IORESOURCE_IO) {
of_pci_range_to_resource(&range, np, &pp->io);
pp->io.name = "I/O";
pp->io.start = max_t(resource_size_t,
PCIBIOS_MIN_IO,
range.pci_addr + global_io_offset);
pp->io.end = min_t(resource_size_t,
IO_SPACE_LIMIT,
range.pci_addr + range.size
+ global_io_offset);
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
pp->mem.name = "MEM";
pp->config.mem_size = resource_size(&pp->mem);
pp->config.mem_bus_addr = range.pci_addr;
}
if (restype == 0) {
of_pci_range_to_resource(&range, np, &pp->cfg);
pp->config.cfg0_size = resource_size(&pp->cfg)/2;
pp->config.cfg1_size = resource_size(&pp->cfg)/2;
}
}
if (!pp->dbi_base) {
pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start,
resource_size(&pp->cfg));
if (!pp->dbi_base) {
dev_err(pp->dev, "error with ioremap\n");
return -ENOMEM;
}
}
pp->cfg0_base = pp->cfg.start;
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
pp->io_base = pp->io.start;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
pp->config.cfg0_size);
if (!pp->va_cfg0_base) {
dev_err(pp->dev, "error with ioremap in function\n");
return -ENOMEM;
}
pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
pp->config.cfg1_size);
if (!pp->va_cfg1_base) {
dev_err(pp->dev, "error with ioremap\n");
return -ENOMEM;
}
if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
dev_err(pp->dev, "Failed to parse the number of lanes\n");
return -EINVAL;
}
if (pp->ops->host_init)
pp->ops->host_init(pp);
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
/* program correct class for RC */
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
val |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
dw_pci.nr_controllers = 1;
dw_pci.private_data = (void **)&pp;
pci_common_init(&dw_pci);
pci_assign_unassigned_resources();
#ifdef CONFIG_PCI_DOMAINS
dw_pci.domain++;
#endif
return 0;
}
static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
{
/* Program viewport 0 : OUTBOUND : CFG0 */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
}
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
{
/* Program viewport 1 : OUTBOUND : CFG1 */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
}
static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
{
/* Program viewport 0 : OUTBOUND : MEM */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
PCIE_ATU_UPPER_TARGET);
}
static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
{
/* Program viewport 1 : OUTBOUND : IO */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
PCIE_ATU_UPPER_TARGET);
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
u32 devfn, int where, int size, u32 *val)
{
int ret = PCIBIOS_SUCCESSFUL;
u32 address, busdev;
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
PCIE_ATU_FUNC(PCI_FUNC(devfn));
address = where & ~0x3;
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
}
static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
u32 devfn, int where, int size, u32 val)
{
int ret = PCIBIOS_SUCCESSFUL;
u32 address, busdev;
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
PCIE_ATU_FUNC(PCI_FUNC(devfn));
address = where & ~0x3;
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
}
static int dw_pcie_valid_config(struct pcie_port *pp,
struct pci_bus *bus, int dev)
{
/* If there is no link, then there is no device */
if (bus->number != pp->root_bus_nr) {
if (!dw_pcie_link_up(pp))
return 0;
}
/* access only one slot on each root port */
if (bus->number == pp->root_bus_nr && dev > 0)
return 0;
/*
* do not read more than one device on the bus directly attached
* to RC's (Virtual Bridge's) DS side.
*/
if (bus->primary == pp->root_bus_nr && dev > 0)
return 0;
return 1;
}
static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
unsigned long flags;
int ret;
if (!pp) {
BUG();
return -EINVAL;
}
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&pp->conf_lock, flags);
if (bus->number != pp->root_bus_nr)
ret = dw_pcie_rd_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_rd_own_conf(pp, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
unsigned long flags;
int ret;
if (!pp) {
BUG();
return -EINVAL;
}
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pp->conf_lock, flags);
if (bus->number != pp->root_bus_nr)
ret = dw_pcie_wr_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_wr_own_conf(pp, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static struct pci_ops dw_pcie_ops = {
.read = dw_pcie_rd_conf,
.write = dw_pcie_wr_conf,
};
int dw_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct pcie_port *pp;
pp = sys_to_pcie(sys);
if (!pp)
return 0;
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
pci_ioremap_io(sys->io_offset, pp->io.start);
global_io_offset += SZ_64K;
pci_add_resource_offset(&sys->resources, &pp->io,
sys->io_offset);
}
sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr;
pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
return 1;
}
struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
struct pcie_port *pp = sys_to_pcie(sys);
if (pp) {
pp->root_bus_nr = sys->busnr;
bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
sys, &sys->resources);
} else {
bus = NULL;
BUG();
}
return bus;
}
int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
return pp->irq;
}
static struct hw_pci dw_pci = {
.setup = dw_pcie_setup,
.scan = dw_pcie_scan_bus,
.map_irq = dw_pcie_map_irq,
};
void dw_pcie_setup_rc(struct pcie_port *pp)
{
struct pcie_port_info *config = &pp->config;
u32 val;
u32 membase;
u32 memlimit;
/* set the number of lines as 4 */
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
val &= ~PORT_LINK_MODE_MASK;
switch (pp->lanes) {
case 1:
val |= PORT_LINK_MODE_1_LANES;
break;
case 2:
val |= PORT_LINK_MODE_2_LANES;
break;
case 4:
val |= PORT_LINK_MODE_4_LANES;
break;
}
dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL);
/* set link width speed control register */
dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
switch (pp->lanes) {
case 1:
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
break;
case 2:
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
break;
case 4:
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
break;
}
dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL);
/* setup RC BARs */
dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0);
dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_1);
/* setup interrupt pins */
dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val);
val &= 0xffff00ff;
val |= 0x00000100;
dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE);
/* setup bus numbers */
dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val);
val &= 0xff000000;
val |= 0x00010100;
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
/* setup memory base, memory limit */
membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000;
val = memlimit | membase;
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
/* setup command register */
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
val &= 0xffff0000;
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
}
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
MODULE_DESCRIPTION("Designware PCIe host controller driver");
MODULE_LICENSE("GPL v2");

View File

@ -0,0 +1,65 @@
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct pcie_port_info {
u32 cfg0_size;
u32 cfg1_size;
u32 io_size;
u32 mem_size;
phys_addr_t io_bus_addr;
phys_addr_t mem_bus_addr;
};
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
void __iomem *va_cfg1_base;
u64 io_base;
u64 mem_base;
spinlock_t conf_lock;
struct resource cfg;
struct resource io;
struct resource mem;
struct pcie_port_info config;
int irq;
u32 lanes;
struct pcie_host_ops *ops;
};
struct pcie_host_ops {
void (*readl_rc)(struct pcie_port *pp,
void __iomem *dbi_base, u32 *val);
void (*writel_rc)(struct pcie_port *pp,
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
};
extern unsigned long global_io_offset;
int cfg_read(void __iomem *addr, int where, int size, u32 *val);
int cfg_write(void __iomem *addr, int where, int size, u32 val);
int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, u32 val);
int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
int dw_pcie_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys);
int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);

View File

@ -0,0 +1,201 @@
From: Andrew Murray <Andrew.Murray@arm.com>
Subject: [PATCH] of/pci: Provide support for parsing PCI DT ranges property
This patch factors out common implementation patterns to reduce overall kernel
code and provide a means for host bridge drivers to directly obtain struct
resources from the DT's ranges property without relying on architecture specific
DT handling. This will make it easier to write archiecture independent host bridge
drivers and mitigate against further duplication of DT parsing code.
This patch can be used in the following way:
struct of_pci_range_parser parser;
struct of_pci_range range;
if (of_pci_range_parser_init(&parser, np))
; //no ranges property
for_each_of_pci_range(&parser, &range) {
/*
directly access properties of the address range, e.g.:
range.pci_space, range.pci_addr, range.cpu_addr,
range.size, range.flags
alternatively obtain a struct resource, e.g.:
struct resource res;
of_pci_range_to_resource(&range, np, &res);
*/
}
Additionally the implementation takes care of adjacent ranges and merges them
into a single range (as was the case with powerpc and microblaze).
Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
drivers/of/address.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_address.h | 48 +++++++++++++++++++++++++++++++++
2 files changed, 115 insertions(+)
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 04da786..fdd0636 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -227,6 +227,73 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
}
EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+int of_pci_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node)
+{
+ const int na = 3, ns = 2;
+ int rlen;
+
+ parser->node = node;
+ parser->pna = of_n_addr_cells(node);
+ parser->np = parser->pna + na + ns;
+
+ parser->range = of_get_property(node, "ranges", &rlen);
+ if (parser->range == NULL)
+ return -ENOENT;
+
+ parser->end = parser->range + rlen / sizeof(__be32);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pci_range_parser_init);
+
+struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
+ struct of_pci_range *range)
+{
+ const int na = 3, ns = 2;
+
+ if (!range)
+ return NULL;
+
+ if (!parser->range || parser->range + parser->np > parser->end)
+ return NULL;
+
+ range->pci_space = parser->range[0];
+ range->flags = of_bus_pci_get_flags(parser->range);
+ range->pci_addr = of_read_number(parser->range + 1, ns);
+ range->cpu_addr = of_translate_address(parser->node,
+ parser->range + na);
+ range->size = of_read_number(parser->range + parser->pna + na, ns);
+
+ parser->range += parser->np;
+
+ /* Now consume following elements while they are contiguous */
+ while (parser->range + parser->np <= parser->end) {
+ u32 flags, pci_space;
+ u64 pci_addr, cpu_addr, size;
+
+ pci_space = be32_to_cpup(parser->range);
+ flags = of_bus_pci_get_flags(parser->range);
+ pci_addr = of_read_number(parser->range + 1, ns);
+ cpu_addr = of_translate_address(parser->node,
+ parser->range + na);
+ size = of_read_number(parser->range + parser->pna + na, ns);
+
+ if (flags != range->flags)
+ break;
+ if (pci_addr != range->pci_addr + range->size ||
+ cpu_addr != range->cpu_addr + range->size)
+ break;
+
+ range->size += size;
+ parser->range += parser->np;
+ }
+
+ return range;
+}
+EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
+
#endif /* CONFIG_PCI */
/*
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 0506eb5..4c2e6f2 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -4,6 +4,36 @@
#include <linux/errno.h>
#include <linux/of.h>
+struct of_pci_range_parser {
+ struct device_node *node;
+ const __be32 *range;
+ const __be32 *end;
+ int np;
+ int pna;
+};
+
+struct of_pci_range {
+ u32 pci_space;
+ u64 pci_addr;
+ u64 cpu_addr;
+ u64 size;
+ u32 flags;
+};
+
+#define for_each_of_pci_range(parser, range) \
+ for (; of_pci_range_parser_one(parser, range);)
+
+static inline void of_pci_range_to_resource(struct of_pci_range *range,
+ struct device_node *np,
+ struct resource *res)
+{
+ res->flags = range->flags;
+ res->start = range->cpu_addr;
+ res->end = range->cpu_addr + range->size - 1;
+ res->parent = res->child = res->sibling = NULL;
+ res->name = np->full_name;
+}
+
#ifdef CONFIG_OF_ADDRESS
extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
extern bool of_can_translate_address(struct device_node *dev);
@@ -27,6 +57,11 @@ static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
#define pci_address_to_pio pci_address_to_pio
#endif
+extern int of_pci_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node);
+extern struct of_pci_range *of_pci_range_parser_one(
+ struct of_pci_range_parser *parser,
+ struct of_pci_range *range);
#else /* CONFIG_OF_ADDRESS */
#ifndef of_address_to_resource
static inline int of_address_to_resource(struct device_node *dev, int index,
@@ -53,6 +88,19 @@ static inline const __be32 *of_get_address(struct device_node *dev, int index,
{
return NULL;
}
+
+static inline int of_pci_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node)
+{
+ return -1;
+}
+
+static inline struct of_pci_range *of_pci_range_parser_one(
+ struct of_pci_range_parser *parser,
+ struct of_pci_range *range)
+{
+ return NULL;
+}
#endif /* CONFIG_OF_ADDRESS */
--
1.8.4

View File

@ -0,0 +1,57 @@
Subject: [v6,1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q
From: Sean Cross <xobs@kosagi.com>
The i.MX6 has two general-purpose LVDS clocks that can be driven
from a variety of sources. This patch adds a mux and a gate for
both of these clocks.
Signed-off-by: Sean Cross <xobs@kosagi.com>
---
arch/arm/mach-imx/clk-imx6q.c | 20 +++++++++++++++++++-
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 9181a24..d94be84 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -205,6 +205,11 @@ static const char *vpu_axi_sels[] = { "a
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+static const char *lvds_sels[] = {
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+ "pcie_ref", "sata_ref",
+};
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -238,7 +243,8 @@ enum mx6q_clks {
pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
+ usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div,
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -340,6 +347,18 @@ int __init mx6q_clocks_init(void)
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ /*
+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
+ * independently configured as clock inputs or outputs. We treat
+ * the "output_enable" bit as a gate, even though it's really just
+ * enabling clock output.
+ */
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);

View File

@ -0,0 +1,37 @@
Subject: [v6,2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition
From: Sean Cross <xobs@kosagi.com>
PCIe requires additional bits be defined for GPR8 and GPR12.
Signed-off-by: Sean Cross <xobs@kosagi.com>
---
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index b6bdcd6..e00e9f3 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -241,6 +241,12 @@
#define IMX6Q_GPR5_L2_CLK_STOP BIT(8)
+#define IMX6Q_GPR8_TX_SWING_LOW (0x7f << 25)
+#define IMX6Q_GPR8_TX_SWING_FULL (0x7f << 18)
+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB (0x3f << 12)
+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB (0x3f << 6)
+#define IMX6Q_GPR8_TX_DEEMPH_GEN1 (0x3f << 0)
+
#define IMX6Q_GPR9_TZASC2_BYP BIT(1)
#define IMX6Q_GPR9_TZASC1_BYP BIT(0)
@@ -273,7 +279,9 @@
#define IMX6Q_GPR12_ARMP_AHB_CLK_EN BIT(26)
#define IMX6Q_GPR12_ARMP_ATB_CLK_EN BIT(25)
#define IMX6Q_GPR12_ARMP_APB_CLK_EN BIT(24)
+#define IMX6Q_GPR12_DEVICE_TYPE (0xf << 12)
#define IMX6Q_GPR12_PCIE_CTL_2 BIT(10)
+#define IMX6Q_GPR12_LOS_LEVEL (0x1f << 4)
#define IMX6Q_GPR13_SDMA_STOP_REQ BIT(30)
#define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)

View File

@ -0,0 +1,674 @@
Subject: [v6,3/3] PCI: imx6: Add support for i.MX6 PCIe controller
From: Sean Cross <xobs@kosagi.com>
Add support for the PCIe port present on the i.MX6 family of controllers.
These use the Synopsis Designware core tied to their own PHY.
Signed-off-by: Sean Cross <xobs@kosagi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boot/dts/imx6qdl.dtsi | 16 +
arch/arm/mach-imx/Kconfig | 2 +
arch/arm/mach-imx/clk-imx6q.c | 4 +
drivers/pci/host/Kconfig | 6 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-imx6.c | 576 ++++++++++++++++++++
7 files changed, 611 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/host/pci-imx6.c
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index ccd55c2..125202e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -116,6 +116,22 @@
arm,data-latency = <4 2 3>;
};
+ pcie: pcie@0x01000000 {
+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+ reg = <0x01ffc000 0x4000>; /* DBI */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <0 123 0x04>;
+ clocks = <&clks 189>, <&clks 187>, <&clks 205>, <&clks 144>;
+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+ status = "disabled";
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 94 0x04>;
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a8af6..e6ac281 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -801,6 +801,8 @@ config SOC_IMX6Q
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
+ select MIGHT_HAVE_PCI
+ select PCI_DOMAINS if PCI
select PINCTRL
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index d94be84..6956995 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -621,6 +621,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
+ /* All existing boards with PCIe use LVDS1 */
+ if (IS_ENABLED(CONFIG_PCI_IMX6))
+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
--- /dev/null
+++ b/drivers/pci/host/Kconfig
@@ -0,0 +1,13 @@
+menu "PCI host controller drivers"
+ depends on PCI
+
+config PCIE_DW
+ bool
+
+config PCI_IMX6
+ bool "Freescale i.MX6 PCIe controller"
+ depends on SOC_IMX6Q
+ select PCIEPORTBUS
+ select PCIE_DW
+
+endmenu
--- /dev/null
+++ b/drivers/pci/host/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
--- /dev/null
+++ b/drivers/pci/host/pci-imx6.c
@@ -0,0 +1,576 @@
+/*
+ * PCIe host controller driver for Freescale i.MX6 SoCs
+ *
+ * Copyright (C) 2013 Kosagi
+ * http://www.kosagi.com
+ *
+ * Author: Sean Cross <xobs@kosagi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
+
+struct imx6_pcie {
+ int reset_gpio;
+ int power_on_gpio;
+ int wake_up_gpio;
+ int disable_gpio;
+ struct clk *lvds_gate;
+ struct clk *sata_ref_100m;
+ struct clk *pcie_ref_125m;
+ struct clk *pcie_axi;
+ struct pcie_port pp;
+ struct regmap *iomuxc_gpr;
+ void __iomem *mem_base;
+};
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
+
+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
+#define PCIE_PHY_CTRL_DATA_LOC 0
+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
+#define PCIE_PHY_CTRL_WR_LOC 18
+#define PCIE_PHY_CTRL_RD_LOC 19
+
+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
+#define PCIE_PHY_STAT_ACK_LOC 16
+
+/* PHY registers (not memory-mapped) */
+#define PCIE_PHY_RX_ASIC_OUT 0x100D
+
+#define PHY_RX_OVRD_IN_LO 0x1005
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
+
+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
+{
+ u32 val;
+ u32 max_iterations = 10;
+ u32 wait_counter = 0;
+
+ do {
+ val = readl(dbi_base + PCIE_PHY_STAT);
+ val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
+ wait_counter++;
+
+ if (val == exp_val)
+ return 0;
+
+ udelay(1);
+ } while ((wait_counter < max_iterations) && (val != exp_val));
+
+ return -ETIMEDOUT;
+}
+
+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
+{
+ u32 val;
+ int ret;
+
+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
+ writel(val, dbi_base + PCIE_PHY_CTRL);
+
+ val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
+ writel(val, dbi_base + PCIE_PHY_CTRL);
+
+ ret = pcie_phy_poll_ack(dbi_base, 1);
+ if (ret)
+ return ret;
+
+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
+ writel(val, dbi_base + PCIE_PHY_CTRL);
+
+ ret = pcie_phy_poll_ack(dbi_base, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
+{
+ u32 val, phy_ctl;
+ int ret;
+
+ ret = pcie_phy_wait_ack(dbi_base, addr);
+ if (ret)
+ return ret;
+
+ /* assert Read signal */
+ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
+ writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
+
+ ret = pcie_phy_poll_ack(dbi_base, 1);
+ if (ret)
+ return ret;
+
+ val = readl(dbi_base + PCIE_PHY_STAT);
+ *data = val & 0xffff;
+
+ /* deassert Read signal */
+ writel(0x00, dbi_base + PCIE_PHY_CTRL);
+
+ ret = pcie_phy_poll_ack(dbi_base, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
+{
+ u32 var;
+ int ret;
+
+ /* write addr */
+ /* cap addr */
+ ret = pcie_phy_wait_ack(dbi_base, addr);
+ if (ret)
+ return ret;
+
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
+ writel(var, dbi_base + PCIE_PHY_CTRL);
+
+ /* capture data */
+ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
+ writel(var, dbi_base + PCIE_PHY_CTRL);
+
+ ret = pcie_phy_poll_ack(dbi_base, 1);
+ if (ret)
+ return ret;
+
+ /* deassert cap data */
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
+ writel(var, dbi_base + PCIE_PHY_CTRL);
+
+ /* wait for ack de-assetion */
+ ret = pcie_phy_poll_ack(dbi_base, 0);
+ if (ret)
+ return ret;
+
+ /* assert wr signal */
+ var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
+ writel(var, dbi_base + PCIE_PHY_CTRL);
+
+ /* wait for ack */
+ ret = pcie_phy_poll_ack(dbi_base, 1);
+ if (ret)
+ return ret;
+
+ /* deassert wr signal */
+ var = data << PCIE_PHY_CTRL_DATA_LOC;
+ writel(var, dbi_base + PCIE_PHY_CTRL);
+
+ /* wait for ack de-assetion */
+ ret = pcie_phy_poll_ack(dbi_base, 0);
+ if (ret)
+ return ret;
+
+ writel(0x0, dbi_base + PCIE_PHY_CTRL);
+
+ return 0;
+}
+
+/* Added for PCI abort handling */
+static int imx6q_pcie_abort_handler(unsigned long addr,
+ unsigned int fsr, struct pt_regs *regs)
+{
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+ return 0;
+}
+
+static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
+{
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
+
+ gpio_set_value(imx6_pcie->reset_gpio, 0);
+ msleep(100);
+ gpio_set_value(imx6_pcie->reset_gpio, 1);
+
+ return 0;
+}
+
+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
+{
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+ int ret;
+
+ if (gpio_is_valid(imx6_pcie->power_on_gpio))
+ gpio_set_value(imx6_pcie->power_on_gpio, 1);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+
+ ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
+ if (ret) {
+ dev_err(pp->dev, "unable to enable sata_ref_100m\n");
+ goto err_sata_ref;
+ }
+
+ ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
+ if (ret) {
+ dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
+ goto err_pcie_ref;
+ }
+
+ ret = clk_prepare_enable(imx6_pcie->lvds_gate);
+ if (ret) {
+ dev_err(pp->dev, "unable to enable lvds_gate\n");
+ goto err_lvds_gate;
+ }
+
+ ret = clk_prepare_enable(imx6_pcie->pcie_axi);
+ if (ret) {
+ dev_err(pp->dev, "unable to enable pcie_axi\n");
+ goto err_pcie_axi;
+ }
+
+ /* allow the clocks to stabilize */
+ usleep_range(200, 500);
+
+ return 0;
+
+err_pcie_axi:
+ clk_disable_unprepare(imx6_pcie->lvds_gate);
+err_lvds_gate:
+ clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
+err_pcie_ref:
+ clk_disable_unprepare(imx6_pcie->sata_ref_100m);
+err_sata_ref:
+ return ret;
+
+}
+
+static void imx6_pcie_init_phy(struct pcie_port *pp)
+{
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+
+ /* configure constant input signal to the pcie ctrl and phy */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
+}
+
+static void imx6_pcie_host_init(struct pcie_port *pp)
+{
+ int count = 0;
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+ imx6_pcie_assert_core_reset(pp);
+
+ imx6_pcie_init_phy(pp);
+
+ imx6_pcie_deassert_core_reset(pp);
+
+ dw_pcie_setup_rc(pp);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+
+ while (!dw_pcie_link_up(pp)) {
+ usleep_range(100, 1000);
+ count++;
+ if (count >= 10) {
+ dev_err(pp->dev, "phy link never came up\n");
+ dev_dbg(pp->dev,
+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+ break;
+ }
+ }
+
+ return;
+}
+
+static int imx6_pcie_link_up(struct pcie_port *pp)
+{
+ u32 rc, ltssm, rx_valid, temp;
+
+ /* link is debug bit 36, debug register 1 starts at bit 32 */
+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
+ if (rc)
+ return -EAGAIN;
+
+ /*
+ * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
+ * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
+ * If (MAC/LTSSM.state == Recovery.RcvrLock)
+ * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
+ * to gen2 is stuck
+ */
+ pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
+ ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
+
+ if (rx_valid & 0x01)
+ return 0;
+
+ if (ltssm != 0x0d)
+ return 0;
+
+ dev_err(pp->dev,
+ "transition to gen2 is stuck, reset PHY!\n");
+
+ pcie_phy_read(pp->dbi_base,
+ PHY_RX_OVRD_IN_LO, &temp);
+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base,
+ PHY_RX_OVRD_IN_LO, temp);
+
+ usleep_range(2000, 3000);
+
+ pcie_phy_read(pp->dbi_base,
+ PHY_RX_OVRD_IN_LO, &temp);
+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base,
+ PHY_RX_OVRD_IN_LO, temp);
+
+ return 0;
+}
+
+static struct pcie_host_ops imx6_pcie_host_ops = {
+ .link_up = imx6_pcie_link_up,
+ .host_init = imx6_pcie_host_init,
+};
+
+static int imx6_add_pcie_port(struct pcie_port *pp,
+ struct platform_device *pdev)
+{
+ int ret;
+
+ pp->irq = platform_get_irq(pdev, 0);
+ if (!pp->irq) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ return -ENODEV;
+ }
+
+ pp->root_bus_nr = -1;
+ pp->ops = &imx6_pcie_host_ops;
+
+ spin_lock_init(&pp->conf_lock);
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init imx6_pcie_probe(struct platform_device *pdev)
+{
+ struct imx6_pcie *imx6_pcie;
+ struct pcie_port *pp;
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *dbi_base;
+ int ret;
+
+ imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
+ if (!imx6_pcie)
+ return -ENOMEM;
+
+ pp = &imx6_pcie->pp;
+ pp->dev = &pdev->dev;
+
+ /* Added for PCI abort handling */
+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
+ "imprecise external abort");
+
+ dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!dbi_base) {
+ dev_err(&pdev->dev, "dbi_base memory resource not found\n");
+ return -ENODEV;
+ }
+
+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
+ if (IS_ERR(pp->dbi_base)) {
+ dev_err(&pdev->dev, "unable to remap dbi_base\n");
+ ret = PTR_ERR(pp->dbi_base);
+ goto err;
+ }
+
+ /* Fetch GPIOs */
+ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+ if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
+ dev_err(&pdev->dev, "no reset-gpio defined\n");
+ ret = -ENODEV;
+ }
+ ret = devm_gpio_request_one(&pdev->dev,
+ imx6_pcie->reset_gpio,
+ GPIOF_OUT_INIT_LOW,
+ "PCIe reset");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get reset gpio\n");
+ goto err;
+ }
+
+ imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev,
+ imx6_pcie->power_on_gpio,
+ GPIOF_OUT_INIT_LOW,
+ "PCIe power enable");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get power-on gpio\n");
+ goto err;
+ }
+ }
+
+ imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
+ if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev,
+ imx6_pcie->wake_up_gpio,
+ GPIOF_IN,
+ "PCIe wake up");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get wake-up gpio\n");
+ goto err;
+ }
+ }
+
+ imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
+ if (gpio_is_valid(imx6_pcie->disable_gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev,
+ imx6_pcie->disable_gpio,
+ GPIOF_OUT_INIT_HIGH,
+ "PCIe disable endpoint");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
+ goto err;
+ }
+ }
+
+ /* Fetch clocks */
+ imx6_pcie->lvds_gate = clk_get(&pdev->dev, "lvds_gate");
+ if (IS_ERR(imx6_pcie->lvds_gate)) {
+ dev_err(&pdev->dev,
+ "lvds_gate clock select missing or invalid\n");
+ ret = PTR_ERR(imx6_pcie->lvds_gate);
+ goto err;
+ }
+
+ imx6_pcie->sata_ref_100m = clk_get(&pdev->dev, "sata_ref_100m");
+ if (IS_ERR(imx6_pcie->sata_ref_100m)) {
+ dev_err(&pdev->dev,
+ "sata_ref_100m clock source missing or invalid\n");
+ ret = PTR_ERR(imx6_pcie->sata_ref_100m);
+ goto err;
+ }
+
+ imx6_pcie->pcie_ref_125m = clk_get(&pdev->dev, "pcie_ref_125m");
+ if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
+ dev_err(&pdev->dev,
+ "pcie_ref_125m clock source missing or invalid\n");
+ ret = PTR_ERR(imx6_pcie->pcie_ref_125m);
+ goto err;
+ }
+
+ imx6_pcie->pcie_axi = clk_get(&pdev->dev, "pcie_axi");
+ if (IS_ERR(imx6_pcie->pcie_axi)) {
+ dev_err(&pdev->dev,
+ "pcie_axi clock source missing or invalid\n");
+ ret = PTR_ERR(imx6_pcie->pcie_axi);
+ goto err;
+ }
+
+ /* Grab GPR config register range */
+ imx6_pcie->iomuxc_gpr =
+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
+ dev_err(&pdev->dev, "unable to find iomuxc registers\n");
+ ret = PTR_ERR(imx6_pcie->iomuxc_gpr);
+ goto err;
+ }
+
+ ret = imx6_add_pcie_port(pp, pdev);
+ if (ret < 0)
+ goto err;
+
+ platform_set_drvdata(pdev, imx6_pcie);
+ return 0;
+
+err:
+ return ret;
+}
+
+static const struct of_device_id imx6_pcie_of_match[] = {
+ { .compatible = "fsl,imx6q-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
+
+static struct platform_driver imx6_pcie_driver = {
+ .driver = {
+ .name = "imx6q-pcie",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(imx6_pcie_of_match),
+ },
+};
+
+/* Freescale PCIe driver does not allow module unload */
+
+static int __init imx6_init(void)
+{
+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
+}
+module_init(imx6_init);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
+MODULE_LICENSE("GPL v2");

View File

@ -0,0 +1,17 @@
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -125,3 +125,5 @@ config PCI_IOAPIC
config PCI_LABEL
def_bool y if (DMI || ACPI)
select NLS
+
+source "drivers/pci/host/Kconfig"
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen
obj-$(CONFIG_OF) += of.o
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+
+# PCI host controller drivers
+obj-y += host/

View File

@ -0,0 +1,35 @@
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -119,7 +119,7 @@
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <0 123 0x04>;
- clocks = <&clks 189>, <&clks 187>, <&clks 205>, <&clks 144>;
+ clocks = <&clks 189>, <&clks 187>, <&clks 198>, <&clks 144>;
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
status = "disabled";
};
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -200,12 +200,6 @@
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
{
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
return 0;
}
@@ -322,7 +316,7 @@
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
while (!dw_pcie_link_up(pp)) {
- usleep_range(100, 1000);
+ usleep_range(2000, 3000);
count++;
if (count >= 10) {
dev_err(pp->dev, "phy link never came up\n");

View File

@ -1,91 +0,0 @@
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -391,6 +391,15 @@
status = "disabled";
};
+ pcie: pcie@01ffc000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx6q-pcie", "fsl,pcie";
+ reg = <0x01ffc000 0x4000>;
+ clocks = <&clks 144>, <&clks 189>;
+ clock-names = "pcie_axi", "pcie_ref_125m";
+ status = "disabled";
+ };
+
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -790,6 +790,8 @@ config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select ARCH_HAS_IMX_PCIE
+ select ARCH_SUPPORTS_MSI
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
@@ -816,6 +818,10 @@ config SOC_IMX6Q
help
This enables support for Freescale i.MX6 Quad processor.
+config IMX_PCIE
+ bool "PCI Express support"
+ select PCI
+
endif
source "arch/arm/mach-imx/devices/Kconfig"
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -98,6 +98,8 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
+obj-$(CONFIG_IMX_PCIE) += pcie.o
+obj-$(CONFIG_PCI_MSI) += msi.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -547,6 +547,12 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
clk_register_clkdev(clk[arm], NULL, "cpu0");
+ clk_register_clkdev(clk[pcie_axi_sel], "pcie_axi_sel", NULL);
+ clk_register_clkdev(clk[axi], "axi", NULL);
+ clk_register_clkdev(clk[pll6_enet], "pll6_enet", NULL);
+ clk_register_clkdev(clk[pcie_ref], "pcie_ref", NULL);
+ clk_register_clkdev(clk[pcie_ref_125m], "pcie_ref_125m", NULL);
+ clk_register_clkdev(clk[pcie_axi], "pcie_axi", NULL);
if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -151,6 +151,10 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx53() (0)
#endif
+#ifdef CONFIG_SOC_IMX6Q
+# define mxc_cpu_type __mxc_cpu_type
+#endif
+
#ifndef __ASSEMBLY__
static inline bool cpu_is_imx6dl(void)
{
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -178,6 +178,9 @@ extern int pci_ioremap_io(unsigned int o
*/
#ifdef CONFIG_NEED_MACH_IO_H
#include <mach/io.h>
+#elif defined(CONFIG_SOC_IMX6Q) && defined(CONFIG_IMX_PCIE)
+#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
+#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT)
#elif defined(CONFIG_PCI)
#define IO_SPACE_LIMIT ((resource_size_t)0xfffff)
#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))