mirror of https://github.com/hak5/openwrt.git
ar71xx: rb91x-nand: rewrite to use GPIO API
Rewrite tha rb91x-nand driver to use GPIO API to modify the NAND control lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39700lede-17.01
Gabor Juhos
parent
8fea668cb7
commit
3d906ac6ac
|
|
@ -23,6 +23,7 @@
|
|||
#include <linux/routerboot.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_data/gpio-latch.h>
|
||||
#include <linux/platform_data/rb91x_nand.h>
|
||||
|
||||
#include <asm/prom.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
|
|
@ -54,6 +55,14 @@
|
|||
#define RB91X_LATCH_GPIO_BASE AR934X_GPIO_COUNT
|
||||
#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x))
|
||||
|
||||
#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3)
|
||||
#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4)
|
||||
#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11)
|
||||
#define RB91X_GPIO_NAND_NRW RB91X_LATCH_GPIO(12)
|
||||
#define RB91X_GPIO_NAND_NCE RB91X_LATCH_GPIO(13)
|
||||
#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14)
|
||||
#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15)
|
||||
|
||||
struct rb_board_info {
|
||||
const char *name;
|
||||
u32 flags;
|
||||
|
|
@ -97,6 +106,16 @@ static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
|
|||
.le_active_low = true,
|
||||
};
|
||||
|
||||
static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
|
||||
.gpio_nce = RB91X_GPIO_NAND_NCE,
|
||||
.gpio_ale = RB91X_GPIO_NAND_ALE,
|
||||
.gpio_cle = RB91X_GPIO_NAND_CLE,
|
||||
.gpio_rdy = RB91X_GPIO_NAND_RDY,
|
||||
.gpio_read = RB91X_GPIO_NAND_READ,
|
||||
.gpio_nrw = RB91X_GPIO_NAND_NRW,
|
||||
.gpio_nle = RB91X_GPIO_NLE,
|
||||
};
|
||||
|
||||
static void __init rb711gr100_init_partitions(const struct rb_info *info)
|
||||
{
|
||||
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
|
||||
|
|
@ -179,7 +198,9 @@ static void __init rb711gr100_setup(void)
|
|||
|
||||
rb711gr100_wlan_init();
|
||||
|
||||
platform_device_register_simple("rb91x-nand", -1, NULL, 0);
|
||||
platform_device_register_data(NULL, "rb91x-nand", -1,
|
||||
&rb711gr100_nand_data,
|
||||
sizeof(rb711gr100_nand_data));
|
||||
|
||||
platform_device_register_data(NULL, "gpio-latch", -1,
|
||||
&rb711gr100_gpio_latch_data,
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* NAND flash driver for the MikroTik RouterBOARD 91x series
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
|
|
@ -17,27 +17,21 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_data/rb91x_nand.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
|
||||
#define DRV_NAME "rb91x-nand"
|
||||
#define DRV_DESC "NAND flash driver for the RouterBOARD 91x series"
|
||||
|
||||
#define RB91X_NAND_NRE_ENABLE BIT(3)
|
||||
#define RB91X_NAND_RDY BIT(4)
|
||||
#define RB91X_LATCH_ENABLE BIT(11)
|
||||
#define RB91X_NAND_NRWE BIT(12)
|
||||
#define RB91X_NAND_NCE BIT(13)
|
||||
#define RB91X_NAND_CLE BIT(14)
|
||||
#define RB91X_NAND_ALE BIT(15)
|
||||
|
||||
#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
|
||||
BIT(13) | BIT(14) | BIT(15))
|
||||
|
||||
#define RB91X_NAND_INPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
|
||||
#define RB91X_NAND_OUTPUT_BITS \
|
||||
(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
|
||||
#define RB91X_NAND_OUTPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
|
||||
|
||||
#define RB91X_NAND_LOW_DATA_MASK 0x1f
|
||||
#define RB91X_NAND_HIGH_DATA_MASK 0xe0
|
||||
|
|
@ -46,6 +40,15 @@
|
|||
struct rb91x_nand_info {
|
||||
struct nand_chip chip;
|
||||
struct mtd_info mtd;
|
||||
struct device *dev;
|
||||
|
||||
int gpio_nce;
|
||||
int gpio_ale;
|
||||
int gpio_cle;
|
||||
int gpio_rdy;
|
||||
int gpio_read;
|
||||
int gpio_nrw;
|
||||
int gpio_nle;
|
||||
};
|
||||
|
||||
static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
|
||||
|
|
@ -81,53 +84,9 @@ static struct mtd_partition rb91x_nand_partitions[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static void rb91x_change_gpo(u32 clear, u32 set)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
static unsigned on = 0xE002800;
|
||||
static unsigned off = 0x0000C008;
|
||||
static unsigned oe = 0;
|
||||
static DEFINE_SPINLOCK(lock);
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&lock, flags);
|
||||
|
||||
on = (on | set) & ~clear;
|
||||
off = (off | clear) & ~set;
|
||||
|
||||
if (!oe)
|
||||
oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
if (on & RB91X_LATCH_ENABLE) {
|
||||
u32 t;
|
||||
|
||||
t = oe & __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
t &= ~(on | off);
|
||||
__raw_writel(t, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(off, base + AR71XX_GPIO_REG_CLEAR);
|
||||
__raw_writel(on, base + AR71XX_GPIO_REG_SET);
|
||||
} else if (clear & RB91X_LATCH_ENABLE) {
|
||||
oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(RB91X_LATCH_ENABLE,
|
||||
base + AR71XX_GPIO_REG_CLEAR);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&lock, flags);
|
||||
}
|
||||
|
||||
static inline void rb91x_latch_enable(void)
|
||||
{
|
||||
rb91x_change_gpo(RB91X_LATCH_ENABLE, 0);
|
||||
}
|
||||
|
||||
static inline void rb91x_latch_disable(void)
|
||||
{
|
||||
rb91x_change_gpo(0, RB91X_LATCH_ENABLE);
|
||||
}
|
||||
|
||||
static void rb91x_nand_write(const u8 *buf, unsigned len)
|
||||
static void rb91x_nand_write(struct rb91x_nand_info *rbni,
|
||||
const u8 *buf,
|
||||
unsigned len)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
|
|
@ -135,7 +94,8 @@ static void rb91x_nand_write(const u8 *buf, unsigned len)
|
|||
u32 out;
|
||||
unsigned i;
|
||||
|
||||
rb91x_latch_enable();
|
||||
/* enable the latch */
|
||||
gpio_set_value_cansleep(rbni->gpio_nle, 0);
|
||||
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
|
@ -162,30 +122,32 @@ static void rb91x_nand_write(const u8 *buf, unsigned len)
|
|||
}
|
||||
|
||||
/* restore registers */
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
rb91x_latch_disable();
|
||||
/* disable the latch */
|
||||
gpio_set_value_cansleep(rbni->gpio_nle, 1);
|
||||
}
|
||||
|
||||
static void rb91x_nand_read(u8 *read_buf, unsigned len)
|
||||
static void rb91x_nand_read(struct rb91x_nand_info *rbni,
|
||||
u8 *read_buf,
|
||||
unsigned len)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
u32 out_reg;
|
||||
unsigned i;
|
||||
|
||||
/* save registers */
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
/* select nRE mode */
|
||||
rb91x_change_gpo(0, RB91X_NAND_NRE_ENABLE);
|
||||
/* enable read mode */
|
||||
gpio_set_value_cansleep(rbni->gpio_read, 1);
|
||||
|
||||
/* enable latch */
|
||||
rb91x_latch_enable();
|
||||
gpio_set_value_cansleep(rbni->gpio_nle, 0);
|
||||
|
||||
/* save registers */
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* set data lines to input mode */
|
||||
|
|
@ -215,109 +177,169 @@ static void rb91x_nand_read(u8 *read_buf, unsigned len)
|
|||
}
|
||||
|
||||
/* restore registers */
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* disable latch */
|
||||
rb91x_latch_disable();
|
||||
gpio_set_value_cansleep(rbni->gpio_nle, 1);
|
||||
|
||||
/* deselect nRE mode */
|
||||
rb91x_change_gpo(RB91X_NAND_NRE_ENABLE, 0);
|
||||
/* disable read mode */
|
||||
gpio_set_value_cansleep(rbni->gpio_read, 0);
|
||||
}
|
||||
|
||||
static int rb91x_nand_dev_ready(struct mtd_info *mtd)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
|
||||
|
||||
return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB91X_NAND_RDY);
|
||||
return gpio_get_value_cansleep(rbni->gpio_rdy);
|
||||
}
|
||||
|
||||
static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
|
||||
|
||||
if (ctrl & NAND_CTRL_CHANGE) {
|
||||
u32 on = 0;
|
||||
u32 off;
|
||||
|
||||
if (!(ctrl & NAND_NCE))
|
||||
on |= RB91X_NAND_NCE;
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
on |= RB91X_NAND_CLE;
|
||||
|
||||
if (ctrl & NAND_ALE)
|
||||
on |= RB91X_NAND_ALE;
|
||||
|
||||
off = on ^ (RB91X_NAND_ALE | RB91X_NAND_NCE | RB91X_NAND_CLE);
|
||||
rb91x_change_gpo(off, on);
|
||||
gpio_set_value_cansleep(rbni->gpio_cle,
|
||||
(ctrl & NAND_CLE) ? 1 : 0);
|
||||
gpio_set_value_cansleep(rbni->gpio_ale,
|
||||
(ctrl & NAND_ALE) ? 1 : 0);
|
||||
gpio_set_value_cansleep(rbni->gpio_nce,
|
||||
(ctrl & NAND_NCE) ? 0 : 1);
|
||||
}
|
||||
|
||||
if (cmd != NAND_CMD_NONE) {
|
||||
u8 t = cmd;
|
||||
|
||||
rb91x_nand_write(&t, 1);
|
||||
rb91x_nand_write(rbni, &t, 1);
|
||||
}
|
||||
}
|
||||
|
||||
static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
|
||||
{
|
||||
struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
|
||||
u8 data = 0xff;
|
||||
|
||||
rb91x_nand_read(&data, 1);
|
||||
rb91x_nand_read(rbni, &data, 1);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_read(buf, len);
|
||||
struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
|
||||
|
||||
rb91x_nand_read(rbni, buf, len);
|
||||
}
|
||||
|
||||
static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_write(buf, len);
|
||||
struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
|
||||
|
||||
rb91x_nand_write(rbni, buf, len);
|
||||
}
|
||||
|
||||
static int rb91x_nand_gpio_init(struct rb91x_nand_info *info)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Ensure that the LATCH is disabled before initializing
|
||||
* control lines.
|
||||
*/
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_nle,
|
||||
GPIOF_OUT_INIT_HIGH, "LATCH enable");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_nce,
|
||||
GPIOF_OUT_INIT_HIGH, "NAND nCE");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_nrw,
|
||||
GPIOF_OUT_INIT_HIGH, "NAND nRW");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_cle,
|
||||
GPIOF_OUT_INIT_LOW, "NAND CLE");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_ale,
|
||||
GPIOF_OUT_INIT_LOW, "NAND ALE");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_read,
|
||||
GPIOF_OUT_INIT_LOW, "NAND READ");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_gpio_request_one(info->dev, info->gpio_rdy,
|
||||
GPIOF_IN, "NAND RDY");
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rb91x_nand_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct rb91x_nand_info *info;
|
||||
struct rb91x_nand_info *rbni;
|
||||
struct rb91x_nand_platform_data *pdata;
|
||||
int ret;
|
||||
|
||||
pr_info(DRV_DESC "\n");
|
||||
|
||||
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
||||
if (!info)
|
||||
pdata = dev_get_platdata(&pdev->dev);
|
||||
if (!pdata)
|
||||
return -EINVAL;
|
||||
|
||||
rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL);
|
||||
if (!rbni)
|
||||
return -ENOMEM;
|
||||
|
||||
info->chip.priv = &info;
|
||||
info->mtd.priv = &info->chip;
|
||||
info->mtd.owner = THIS_MODULE;
|
||||
rbni->dev = &pdev->dev;
|
||||
rbni->gpio_nce = pdata->gpio_nce;
|
||||
rbni->gpio_ale = pdata->gpio_ale;
|
||||
rbni->gpio_cle = pdata->gpio_cle;
|
||||
rbni->gpio_read = pdata->gpio_read;
|
||||
rbni->gpio_nrw = pdata->gpio_nrw;
|
||||
rbni->gpio_rdy = pdata->gpio_rdy;
|
||||
rbni->gpio_nle = pdata->gpio_nle;
|
||||
|
||||
info->chip.cmd_ctrl = rb91x_nand_cmd_ctrl;
|
||||
info->chip.dev_ready = rb91x_nand_dev_ready;
|
||||
info->chip.read_byte = rb91x_nand_read_byte;
|
||||
info->chip.write_buf = rb91x_nand_write_buf;
|
||||
info->chip.read_buf = rb91x_nand_read_buf;
|
||||
rbni->chip.priv = &rbni;
|
||||
rbni->mtd.priv = &rbni->chip;
|
||||
rbni->mtd.owner = THIS_MODULE;
|
||||
|
||||
info->chip.chip_delay = 25;
|
||||
info->chip.ecc.mode = NAND_ECC_SOFT;
|
||||
rbni->chip.cmd_ctrl = rb91x_nand_cmd_ctrl;
|
||||
rbni->chip.dev_ready = rb91x_nand_dev_ready;
|
||||
rbni->chip.read_byte = rb91x_nand_read_byte;
|
||||
rbni->chip.write_buf = rb91x_nand_write_buf;
|
||||
rbni->chip.read_buf = rb91x_nand_read_buf;
|
||||
|
||||
platform_set_drvdata(pdev, info);
|
||||
rbni->chip.chip_delay = 25;
|
||||
rbni->chip.ecc.mode = NAND_ECC_SOFT;
|
||||
|
||||
ret = nand_scan_ident(&info->mtd, 1, NULL);
|
||||
platform_set_drvdata(pdev, rbni);
|
||||
|
||||
ret = rb91x_nand_gpio_init(rbni);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (info->mtd.writesize == 512)
|
||||
info->chip.ecc.layout = &rb91x_nand_ecclayout;
|
||||
|
||||
ret = nand_scan_tail(&info->mtd);
|
||||
ret = nand_scan_ident(&rbni->mtd, 1, NULL);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = mtd_device_register(&info->mtd, rb91x_nand_partitions,
|
||||
if (rbni->mtd.writesize == 512)
|
||||
rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
|
||||
|
||||
ret = nand_scan_tail(&rbni->mtd);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = mtd_device_register(&rbni->mtd, rb91x_nand_partitions,
|
||||
ARRAY_SIZE(rb91x_nand_partitions));
|
||||
if (ret)
|
||||
goto err_release_nand;
|
||||
|
|
@ -325,7 +347,7 @@ static int rb91x_nand_probe(struct platform_device *pdev)
|
|||
return 0;
|
||||
|
||||
err_release_nand:
|
||||
nand_release(&info->mtd);
|
||||
nand_release(&rbni->mtd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
@ -342,7 +364,7 @@ static struct platform_driver rb91x_nand_driver = {
|
|||
.probe = rb91x_nand_probe,
|
||||
.remove = rb91x_nand_remove,
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.name = RB91X_NAND_DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,16 @@
|
|||
#ifndef _RB91X_NAND_H_
|
||||
#define _RB91X_NAND_H_
|
||||
|
||||
#define RB91X_NAND_DRIVER_NAME "rb91x-nand"
|
||||
|
||||
struct rb91x_nand_platform_data {
|
||||
int gpio_nce; /* chip enable, active low */
|
||||
int gpio_ale; /* address latch enable */
|
||||
int gpio_cle; /* command latch enable */
|
||||
int gpio_rdy;
|
||||
int gpio_read;
|
||||
int gpio_nrw; /* read/write enable, active low */
|
||||
int gpio_nle; /* latch enable, active low */
|
||||
};
|
||||
|
||||
#endif /* _RB91X_NAND_H_ */
|
||||
Loading…
Reference in New Issue