mirror of https://github.com/hak5/openwrt.git
update ar7 to 2.6.22.1 (thanks to Matteo Croce for his great help)
SVN-Revision: 8189lede-17.01
Nicolas Thill
parent
c7437ec67c
commit
39127ef8bf
|
|
@ -344,17 +344,13 @@ diff -urN sangam_atm-07.01.00.10/tn7atm.c sangam-atm-0.3/tn7atm.c
|
|||
|
||||
dgprintf (1, "Leave tn7atm_close\n");
|
||||
}
|
||||
@@ -1518,8 +1467,11 @@
|
||||
@@ -1518,8 +1467,7 @@
|
||||
* firewall is on */
|
||||
|
||||
dgprintf (3, "pushing the skb...\n");
|
||||
-
|
||||
- skb->stamp = vcc->timestamp = xtime;
|
||||
+ {
|
||||
+ struct timeval tv;
|
||||
+ do_gettimeofday(&tv);
|
||||
+ skb_set_timestamp(skb, &tv);
|
||||
+ }
|
||||
+ __net_timestamp(skb);
|
||||
|
||||
xdump ((unsigned char *) skb->data, skb->len, 5);
|
||||
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ BOARD:=ar7
|
|||
BOARDNAME:=TI AR7
|
||||
FEATURES:=squashfs jffs2 atm
|
||||
|
||||
LINUX_VERSION:=2.6.21.5
|
||||
LINUX_VERSION:=2.6.22.1
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for TI AR7 based routers
|
||||
|
|
|
|||
|
|
@ -6,8 +6,9 @@ CONFIG_AR7_GPIO=y
|
|||
CONFIG_AR7_WDT=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ATM_DRIVERS=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ATMEL is not set
|
||||
CONFIG_ATM_DRIVERS=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_BCM43XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
|
|
@ -46,9 +47,11 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
# CONFIG_DDB5477 is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_FIXED_MII_100_FDX=y
|
||||
# CONFIG_FIXED_MII_10_FDX is not set
|
||||
CONFIG_FIXED_PHY=y
|
||||
|
|
@ -57,6 +60,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HERMES is not set
|
||||
|
|
@ -80,35 +84,19 @@ CONFIG_LEDS_AR7=y
|
|||
# CONFIG_MACH_VR41XX is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_BOSPORUS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MIPS_DB1000 is not set
|
||||
# CONFIG_MIPS_DB1100 is not set
|
||||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
# CONFIG_MIPS_MTX1 is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_PB1000 is not set
|
||||
# CONFIG_MIPS_PB1100 is not set
|
||||
# CONFIG_MIPS_PB1200 is not set
|
||||
# CONFIG_MIPS_PB1500 is not set
|
||||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
# CONFIG_MOMENCO_OCELOT_G is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_AR7_PARTS=y
|
||||
|
|
@ -142,7 +130,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
|
|
@ -157,12 +144,10 @@ CONFIG_MTD_PHYSMAP_START=0x10000000
|
|||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
CONFIG_NEED_MULTIPLE_NODES=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NET_PCI is not set
|
||||
CONFIG_NET_SCH_FIFO=y
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
CONFIG_NODES_SHIFT=6
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
|
|
@ -178,6 +163,7 @@ CONFIG_PHYLIB=y
|
|||
# CONFIG_RTC is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
|
|
@ -198,8 +184,10 @@ CONFIG_SERIAL_8250_PCI=y
|
|||
CONFIG_SWAP_IO_SPACE=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_KGDB=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
|
|
@ -207,34 +195,4 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|||
CONFIG_TRAD_SIGNALS=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_USB is not set
|
||||
CONFIG_DEBUG_DEVRES=n
|
||||
CONFIG_DEBUG_DRIVER=n
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_KOBJECT=n
|
||||
CONFIG_DEBUG_LIST=n
|
||||
CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
|
||||
CONFIG_DEBUG_LOCK_ALLOC=n
|
||||
CONFIG_DEBUG_MUTEXES=n
|
||||
CONFIG_DEBUG_RT_MUTEXES=n
|
||||
CONFIG_DEBUG_SHIRQ=n
|
||||
CONFIG_DEBUG_SLAB=n
|
||||
CONFIG_DEBUG_SPINLOCK=n
|
||||
CONFIG_DEBUG_SPINLOCK_SLEEP=n
|
||||
CONFIG_DEBUG_STACK_USAGE=n
|
||||
CONFIG_DEBUG_VM=n
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_FAULT_INJECTION=n
|
||||
CONFIG_FORCED_INLINING=y
|
||||
CONFIG_GDB_CONSOLE=y
|
||||
CONFIG_IP_DCCP_DEBUG=n
|
||||
CONFIG_KALLSYMS_ALL=n
|
||||
CONFIG_KGDB=y
|
||||
CONFIG_MIPS_UNCACHED=n
|
||||
CONFIG_PCI_DEBUG=n
|
||||
CONFIG_PROVE_LOCKING=n
|
||||
CONFIG_RCU_TORTURE_TEST=n
|
||||
CONFIG_RT_MUTEX_TESTER=n
|
||||
CONFIG_RUNTIME_DEBUG=n
|
||||
CONFIG_SCHEDSTATS=n
|
||||
CONFIG_TIMER_STATS=n
|
||||
# CONFIG_VGASTATE is not set
|
||||
|
|
|
|||
|
|
@ -60,132 +60,13 @@ static int __init memsize(void)
|
|||
return size;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_NEED_MULTIPLE_NODES
|
||||
static bootmem_data_t node_bootmem_data;
|
||||
pg_data_t __node_data[1] = {
|
||||
{
|
||||
.bdata = &node_bootmem_data
|
||||
},
|
||||
};
|
||||
EXPORT_SYMBOL(__node_data);
|
||||
|
||||
unsigned long max_mapnr;
|
||||
struct page *mem_map;
|
||||
EXPORT_SYMBOL(max_mapnr);
|
||||
EXPORT_SYMBOL(mem_map);
|
||||
|
||||
static unsigned long setup_zero_pages(void)
|
||||
{
|
||||
unsigned int order = 3;
|
||||
unsigned long size;
|
||||
struct page *page;
|
||||
|
||||
empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
|
||||
if (!empty_zero_page)
|
||||
panic("Oh boy, that early out of memory?");
|
||||
|
||||
page = virt_to_page(empty_zero_page);
|
||||
split_page(page, order);
|
||||
while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
|
||||
SetPageReserved(page);
|
||||
page++;
|
||||
}
|
||||
|
||||
size = PAGE_SIZE << order;
|
||||
zero_page_mask = (size - 1) & PAGE_MASK;
|
||||
|
||||
return 1UL << order;
|
||||
}
|
||||
|
||||
extern void pagetable_init(void);
|
||||
|
||||
void __init paging_init(void)
|
||||
{
|
||||
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
|
||||
|
||||
pagetable_init();
|
||||
|
||||
zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
|
||||
|
||||
free_area_init_node(0, NODE_DATA(0), zones_size, ARCH_PFN_OFFSET, NULL);
|
||||
}
|
||||
|
||||
static struct kcore_list kcore_mem, kcore_vmalloc;
|
||||
|
||||
void __init mem_init(void)
|
||||
{
|
||||
unsigned long codesize, reservedpages, datasize, initsize;
|
||||
unsigned long tmp, ram;
|
||||
unsigned long kernel_start, kernel_end;
|
||||
|
||||
kernel_start = PFN_DOWN(CPHYSADDR((unsigned long)&_text));
|
||||
kernel_end = PFN_UP(CPHYSADDR((unsigned long)&_end));
|
||||
for (tmp = min_low_pfn + 1; tmp < kernel_start; tmp++) {
|
||||
ClearPageReserved(pfn_to_page(tmp));
|
||||
init_page_count(pfn_to_page(tmp));
|
||||
free_page((unsigned long)__va(tmp << PAGE_SHIFT));
|
||||
}
|
||||
|
||||
totalram_pages += free_all_bootmem();
|
||||
totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */
|
||||
|
||||
reservedpages = ram = 0;
|
||||
for (tmp = min_low_pfn; tmp <= max_low_pfn; tmp++) {
|
||||
ram++;
|
||||
if (PageReserved(pfn_to_page(tmp)))
|
||||
if ((tmp < kernel_start) || (tmp > kernel_end))
|
||||
reservedpages++;
|
||||
}
|
||||
num_physpages = ram;
|
||||
|
||||
codesize = (unsigned long) &_etext - (unsigned long) &_text;
|
||||
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
|
||||
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
|
||||
|
||||
kclist_add(&kcore_mem, __va(min_low_pfn),
|
||||
(max_low_pfn - min_low_pfn) << PAGE_SHIFT);
|
||||
kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
|
||||
VMALLOC_END - VMALLOC_START);
|
||||
|
||||
printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
|
||||
"%ldk reserved, %ldk data, %ldk init)\n",
|
||||
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
|
||||
ram << (PAGE_SHIFT-10),
|
||||
codesize >> 10,
|
||||
reservedpages << (PAGE_SHIFT-10),
|
||||
datasize >> 10,
|
||||
initsize >> 10);
|
||||
}
|
||||
#endif
|
||||
|
||||
void __init prom_meminit(void)
|
||||
{
|
||||
unsigned long pages;
|
||||
#ifdef CONFIG_NEED_MULTIPLE_NODES
|
||||
unsigned long kernel_start, kernel_end;
|
||||
unsigned long free_pages;
|
||||
unsigned long bootmap_size;
|
||||
#endif
|
||||
|
||||
pages = memsize() >> PAGE_SHIFT;
|
||||
add_memory_region(ARCH_PFN_OFFSET << PAGE_SHIFT, pages <<
|
||||
PAGE_SHIFT, BOOT_MEM_RAM);
|
||||
|
||||
#ifdef CONFIG_NEED_MULTIPLE_NODES
|
||||
kernel_start = PFN_DOWN(CPHYSADDR((unsigned long)&_text));
|
||||
kernel_end = PFN_UP(CPHYSADDR((unsigned long)&_end));
|
||||
min_low_pfn = ARCH_PFN_OFFSET;
|
||||
max_low_pfn = ARCH_PFN_OFFSET + pages;
|
||||
max_mapnr = max_low_pfn;
|
||||
free_pages = pages - (kernel_end - min_low_pfn);
|
||||
bootmap_size = init_bootmem_node(NODE_DATA(0), kernel_end,
|
||||
ARCH_PFN_OFFSET, max_low_pfn);
|
||||
|
||||
free_bootmem(PFN_PHYS(kernel_end), free_pages << PAGE_SHIFT);
|
||||
memory_present(0, min_low_pfn, max_low_pfn);
|
||||
reserve_bootmem(PFN_PHYS(kernel_end), bootmap_size);
|
||||
mem_map = NODE_DATA(0)->node_mem_map;
|
||||
#endif
|
||||
}
|
||||
|
||||
void __init prom_free_prom_memory(void)
|
||||
|
|
|
|||
|
|
@ -32,6 +32,7 @@
|
|||
#include <asm/io.h>
|
||||
#include <asm/ar7/ar7.h>
|
||||
#include <asm/ar7/gpio.h>
|
||||
#include <asm/ar7/prom.h>
|
||||
#include <asm/ar7/vlynq.h>
|
||||
|
||||
struct plat_vlynq_data {
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@
|
|||
#include <asm/gdb-stub.h>
|
||||
|
||||
#include <asm/ar7/ar7.h>
|
||||
#include <asm/ar7/prom.h>
|
||||
|
||||
#define MAX_ENTRY 80
|
||||
|
||||
|
|
@ -41,72 +42,6 @@ struct env_var {
|
|||
char *value;
|
||||
};
|
||||
|
||||
struct psp_chip_map {
|
||||
u16 chip;
|
||||
char *names[50];
|
||||
};
|
||||
|
||||
/* I hate this. No. *I* *HATE* *THIS* */
|
||||
static __initdata struct psp_chip_map psp_chip_map[] = {
|
||||
{
|
||||
.chip = AR7_CHIP_7100,
|
||||
.names = {
|
||||
"dummy", "cpufrequency", "memsize",
|
||||
"flashsize", "modetty0", "modetty1", "prompt",
|
||||
"bootcfg", "maca", "macb", "usb_rndis_mac",
|
||||
"macap", "my_ipaddress", "server_ipaddress",
|
||||
"bline_maca", "bline_macb", "bline_rndis",
|
||||
"bline_atm", "usb_pid", "usb_vid",
|
||||
"usb_eppolli", "gateway_ipaddress",
|
||||
"subnet_mask", "usb_serial", "usb_board_mac",
|
||||
"remote_user", "remote_pass", "remote_dir",
|
||||
"sysfrequency", "link_timeout", "mac_port",
|
||||
"path", "hostname", "tftpcfg", "buildops",
|
||||
"tftp_fo_fname", "tftp_fo_ports",
|
||||
"console_state", "mipsfrequency",
|
||||
},
|
||||
},
|
||||
{
|
||||
.chip = AR7_CHIP_7200,
|
||||
.names = {
|
||||
"dummy", "cpufrequency", "memsize",
|
||||
"flashsize", "modetty0", "modetty1", "prompt",
|
||||
"bootcfg", "maca", "macb", "usb_rndis_mac",
|
||||
"macap", "my_ipaddress", "server_ipaddress",
|
||||
"bline_maca", "bline_macb", "bline_rndis",
|
||||
"bline_atm", "usb_pid", "usb_vid",
|
||||
"usb_eppolli", "gateway_ipaddress",
|
||||
"subnet_mask", "usb_serial", "usb_board_mac",
|
||||
"remote_user", "remote_pass", "remote_dir",
|
||||
"sysfrequency", "link_timeout", "mac_port",
|
||||
"path", "hostname", "tftpcfg", "buildops",
|
||||
"tftp_fo_fname", "tftp_fo_ports",
|
||||
"console_state", "mipsfrequency",
|
||||
},
|
||||
},
|
||||
{
|
||||
.chip = AR7_CHIP_7300,
|
||||
.names = {
|
||||
"dummy", "cpufrequency", "memsize",
|
||||
"flashsize", "modetty0", "modetty1", "prompt",
|
||||
"bootcfg", "maca", "macb", "usb_rndis_mac",
|
||||
"macap", "my_ipaddress", "server_ipaddress",
|
||||
"bline_maca", "bline_macb", "bline_rndis",
|
||||
"bline_atm", "usb_pid", "usb_vid",
|
||||
"usb_eppolli", "gateway_ipaddress",
|
||||
"subnet_mask", "usb_serial", "usb_board_mac",
|
||||
"remote_user", "remote_pass", "remote_dir",
|
||||
"sysfrequency", "link_timeout", "mac_port",
|
||||
"path", "hostname", "tftpcfg", "buildops",
|
||||
"tftp_fo_fname", "tftp_fo_ports",
|
||||
"console_state", "mipsfrequency",
|
||||
},
|
||||
},
|
||||
{
|
||||
.chip = 0x0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, };
|
||||
|
||||
char * prom_getenv(char *name)
|
||||
|
|
@ -155,15 +90,71 @@ struct psbl_rec {
|
|||
|
||||
static __initdata char psp_env_version[] = "TIENV0.8";
|
||||
|
||||
struct psp_env_var {
|
||||
unsigned char num;
|
||||
unsigned char ctrl;
|
||||
unsigned short csum;
|
||||
unsigned char len;
|
||||
unsigned char data[11];
|
||||
struct psp_env_chunk {
|
||||
u8 num;
|
||||
u8 ctrl;
|
||||
u16 csum;
|
||||
u8 len;
|
||||
char data[11];
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct psp_var_map_entry {
|
||||
u8 num;
|
||||
char *value;
|
||||
};
|
||||
|
||||
static char psp_env_data[2048] = { 0, };
|
||||
static struct psp_var_map_entry psp_var_map[] = {
|
||||
{ 1, "cpufrequency" },
|
||||
{ 2, "memsize" },
|
||||
{ 3, "flashsize" },
|
||||
{ 4, "modetty0" },
|
||||
{ 5, "modetty1" },
|
||||
{ 8, "maca" },
|
||||
{ 9, "macb" },
|
||||
{ 28, "sysfrequency" },
|
||||
{ 38, "mipsfrequency" },
|
||||
};
|
||||
|
||||
/*
|
||||
|
||||
Well-known variable (num is looked up in table above for matching variable name)
|
||||
Example: cpufrequency=211968000
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF |
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
|
||||
Name=Value pair in a single chunk
|
||||
Example: NAME=VALUE
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 |
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
|
||||
Name=Value pair in 2 chunks (len is the number of chunks)
|
||||
Example: bootloaderVersion=1.3.7.15
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V |
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 |
|
||||
+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
|
||||
|
||||
Data is padded with 0xFF
|
||||
|
||||
*/
|
||||
|
||||
#define PSP_ENV_SIZE 4096
|
||||
|
||||
static char psp_env_data[PSP_ENV_SIZE] = { 0, };
|
||||
|
||||
static char * __init lookup_psp_var_map(u8 num)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < sizeof(psp_var_map); i++)
|
||||
if (psp_var_map[i].num == num)
|
||||
return psp_var_map[i].value;
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static void __init add_adam2_var(char *name, char *value)
|
||||
{
|
||||
|
|
@ -180,41 +171,29 @@ static void __init add_adam2_var(char *name, char *value)
|
|||
}
|
||||
}
|
||||
|
||||
static int __init parse_psp_env(void *start)
|
||||
static int __init parse_psp_env(void *psp_env_base)
|
||||
{
|
||||
int i, j;
|
||||
u16 chip;
|
||||
struct psp_chip_map *map;
|
||||
char *src, *dest, *name, *value;
|
||||
struct psp_env_var *vars = start;
|
||||
int i, n;
|
||||
char *name, *value;
|
||||
struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
|
||||
|
||||
chip = ar7_chip_id();
|
||||
for (map = psp_chip_map; map->chip; map++)
|
||||
if (map->chip == chip)
|
||||
break;
|
||||
|
||||
if (!map->chip)
|
||||
return -EINVAL;
|
||||
memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
|
||||
|
||||
i = 1;
|
||||
j = 0;
|
||||
dest = psp_env_data;
|
||||
while (vars[i].num < 0xff) {
|
||||
src = vars[i].data;
|
||||
if (vars[i].num) {
|
||||
strcpy(dest, map->names[vars[i].num]);
|
||||
name = dest;
|
||||
n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
|
||||
while (i < n) {
|
||||
if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
|
||||
break;
|
||||
value = chunks[i].data;
|
||||
if (chunks[i].num) {
|
||||
name = lookup_psp_var_map(chunks[i].num);
|
||||
} else {
|
||||
strcpy(dest, src);
|
||||
name = dest;
|
||||
src += strlen(src) + 1;
|
||||
name = value;
|
||||
value += strlen(name) + 1;
|
||||
}
|
||||
dest += strlen(dest) + 1;
|
||||
strcpy(dest, src);
|
||||
value = dest;
|
||||
dest += strlen(dest) + 1;
|
||||
if (name)
|
||||
add_adam2_var(name, value);
|
||||
i += vars[i].len;
|
||||
i += chunks[i].len;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -116,6 +116,9 @@ void __init plat_mem_setup(void)
|
|||
ioport_resource.end = ~0;
|
||||
iomem_resource.start = 0;
|
||||
iomem_resource.end = ~0;
|
||||
|
||||
printk("%s, ID: 0x%04x, Revision: 0x%02x\n", get_system_type(),
|
||||
ar7_chip_id(), ar7_chip_rev());
|
||||
}
|
||||
|
||||
console_initcall(ar7_init_console);
|
||||
|
|
|
|||
|
|
@ -1173,9 +1173,9 @@ int __devinit cpmac_init(void)
|
|||
#warning FIXME: unhardcode gpio&reset bits
|
||||
ar7_gpio_disable(26);
|
||||
ar7_gpio_disable(27);
|
||||
ar7_device_reset(17);
|
||||
ar7_device_reset(21);
|
||||
ar7_device_reset(26);
|
||||
ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
|
||||
ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
|
||||
ar7_device_reset(AR7_RESET_BIT_EPHY);
|
||||
|
||||
cpmac_mii.reset(&cpmac_mii);
|
||||
|
||||
|
|
|
|||
|
|
@ -53,7 +53,10 @@
|
|||
#define AR7_RESET_SOFTWARE 0x4
|
||||
#define AR7_RESET_STATUS 0x8
|
||||
|
||||
#define AR7_RESET_BIT_CPMAC_LO 17
|
||||
#define AR7_RESET_BIT_CPMAC_HI 21
|
||||
#define AR7_RESET_BIT_MDIO 22
|
||||
#define AR7_RESET_BIT_EPHY 26
|
||||
|
||||
/* GPIO control registers */
|
||||
#define AR7_GPIO_INPUT 0x0
|
||||
|
|
@ -83,8 +86,6 @@ struct plat_dsl_data {
|
|||
int reset_bit_sar;
|
||||
};
|
||||
|
||||
extern char *prom_getenv(char *envname);
|
||||
|
||||
extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
|
||||
|
||||
static inline u16 ar7_chip_id(void)
|
||||
|
|
|
|||
|
|
@ -21,7 +21,6 @@
|
|||
#ifndef __PROM_H__
|
||||
#define __PROM_H__
|
||||
|
||||
extern void prom_init(void);
|
||||
extern char *prom_getenv(char *name);
|
||||
extern void prom_printf(char *fmt, ...);
|
||||
|
||||
|
|
|
|||
|
|
@ -15,8 +15,8 @@ diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
|
|||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_KGDB
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select NEED_MULTIPLE_NODES
|
||||
+ select GENERIC_GPIO
|
||||
+ select ZONE_DMA
|
||||
+
|
||||
|
|
@ -24,7 +24,7 @@ diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
|
|||
bool "Alchemy processor based machines"
|
||||
|
||||
diff -urN linux-2.6.22/arch/mips/kernel/setup.c linux-2.6.22.new/arch/mips/kernel/setup.c
|
||||
--- linux-2.6.22/arch/mips/kernel/setup.c 2007-07-09 01:32:17.000000000 +0200
|
||||
-- linux-2.6.22/arch/mips/kernel/setup.c 2007-07-09 01:32:17.000000000 +0200
|
||||
+++ linux-2.6.22.new/arch/mips/kernel/setup.c 2007-07-11 02:32:39.000000000 +0200
|
||||
@@ -258,7 +258,7 @@
|
||||
* Initialize the bootmem allocator. It also setup initrd related data
|
||||
|
|
|
|||
|
|
@ -1,106 +0,0 @@
|
|||
diff -Nru linux-2.6.19.2/arch/mips/Kconfig linux-ar7/arch/mips/Kconfig
|
||||
--- linux-2.6.19.2/arch/mips/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/Kconfig 2007-01-29 21:52:21.000000000 +0700
|
||||
@@ -16,6 +16,21 @@
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config AR7
|
||||
+ bool "Texas Instruments AR7"
|
||||
+ select BOOT_ELF32
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select SWAP_IO_SPACE
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_KGDB
|
||||
+ select NEED_MULTIPLE_NODES
|
||||
+ select GENERIC_GPIO
|
||||
+
|
||||
config MIPS_MTX1
|
||||
bool "4G Systems MTX-1 board"
|
||||
select DMA_NONCOHERENT
|
||||
diff -Nru linux-2.6.19.2/arch/mips/Makefile linux-ar7/arch/mips/Makefile
|
||||
--- linux-2.6.19.2/arch/mips/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/Makefile 2007-01-29 21:52:21.000000000 +0700
|
||||
@@ -158,6 +158,13 @@
|
||||
#
|
||||
|
||||
#
|
||||
+# Texas Instruments AR7
|
||||
+#
|
||||
+core-$(CONFIG_AR7) += arch/mips/ar7/
|
||||
+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
|
||||
+load-$(CONFIG_AR7) += 0xffffffff94100000
|
||||
+
|
||||
+#
|
||||
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
|
||||
#
|
||||
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
|
||||
diff -Nru linux-2.6.19.2/arch/mips/kernel/setup.c linux-ar7/arch/mips/kernel/setup.c
|
||||
--- linux-2.6.19.2orig/arch/mips/kernel/setup.c 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/kernel/setup.c 2007-03-04 22:32:13.000000000 +0700
|
||||
@@ -236,7 +236,7 @@
|
||||
* Initialize the bootmem allocator. It also setup initrd related data
|
||||
* if needed.
|
||||
*/
|
||||
-#ifdef CONFIG_SGI_IP27
|
||||
+#ifdef CONFIG_NEED_MULTIPLE_NODES
|
||||
|
||||
static void __init bootmem_init(void)
|
||||
{
|
||||
@@ -244,7 +244,7 @@
|
||||
finalize_initrd();
|
||||
}
|
||||
|
||||
-#else /* !CONFIG_SGI_IP27 */
|
||||
+#else /* !CONFIG_NEED_MULTIPLE_NODES */
|
||||
|
||||
static void __init bootmem_init(void)
|
||||
{
|
||||
@@ -349,7 +349,7 @@
|
||||
finalize_initrd();
|
||||
}
|
||||
|
||||
-#endif /* CONFIG_SGI_IP27 */
|
||||
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
|
||||
|
||||
/*
|
||||
* arch_mem_init - initialize memory managment subsystem
|
||||
diff -Nru linux-2.6.19.2/arch/mips/kernel/traps.c linux-ar7/arch/mips/kernel/traps.c
|
||||
--- linux-2.6.19.2/arch/mips/kernel/traps.c 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/kernel/traps.c 2007-03-15 13:19:19.000000000 +0700
|
||||
@@ -1072,11 +1072,6 @@
|
||||
unsigned long exception_handlers[32];
|
||||
unsigned long vi_handlers[64];
|
||||
|
||||
-/*
|
||||
- * As a side effect of the way this is implemented we're limited
|
||||
- * to interrupt handlers in the address range from
|
||||
- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ...
|
||||
- */
|
||||
void *set_except_vector(int n, void *addr)
|
||||
{
|
||||
unsigned long handler = (unsigned long) addr;
|
||||
@@ -1084,9 +1079,15 @@
|
||||
|
||||
exception_handlers[n] = handler;
|
||||
if (n == 0 && cpu_has_divec) {
|
||||
- *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
|
||||
- (0x03ffffff & (handler >> 2));
|
||||
- flush_icache_range(ebase + 0x200, ebase + 0x204);
|
||||
+ /* lui k0, 0x0000 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16);
|
||||
+ /* ori k0, 0x0000 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff);
|
||||
+ /* jr k0 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008;
|
||||
+ /* nop */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000;
|
||||
+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210);
|
||||
}
|
||||
return (void *)old_handler;
|
||||
}
|
||||
|
|
@ -1,39 +0,0 @@
|
|||
diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig
|
||||
--- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700
|
||||
@@ -152,6 +152,12 @@
|
||||
for your particular device. It won't happen automatically. The
|
||||
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
|
||||
|
||||
+config MTD_AR7_PARTS
|
||||
+ tristate "TI AR7 partitioning support"
|
||||
+ depends on MTD_PARTITIONS
|
||||
+ ---help---
|
||||
+ TI AR7 partitioning support
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
depends on MTD
|
||||
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile
|
||||
--- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700
|
||||
@@ -12,6 +12,7 @@
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c
|
||||
--- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700
|
||||
@@ -74,7 +74,7 @@
|
||||
|
||||
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
|
||||
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
|
||||
#endif
|
||||
|
||||
static int physmap_flash_probe(struct platform_device *dev)
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -920,6 +920,15 @@
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mwave.
|
||||
|
||||
+config AR7_GPIO
|
||||
+ tristate "TI AR7 GPIO Support"
|
||||
+ depends on AR7
|
||||
+ help
|
||||
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
|
||||
+ processors.
|
||||
+
|
||||
+ If compiled as a module, it will be called ar7_gpio.
|
||||
+
|
||||
config SCx200_GPIO
|
||||
tristate "NatSemi SCx200 GPIO Support"
|
||||
depends on SCx200
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -83,6 +83,7 @@
|
||||
obj-$(CONFIG_PPDEV) += ppdev.o
|
||||
obj-$(CONFIG_NWBUTTON) += nwbutton.o
|
||||
obj-$(CONFIG_NWFLASH) += nwflash.o
|
||||
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
|
||||
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
|
||||
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
|
||||
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100
|
||||
@@ -19,6 +19,12 @@
|
||||
|
||||
comment "LED drivers"
|
||||
|
||||
+config LEDS_AR7
|
||||
+ tristate "LED Support for the TI AR7"
|
||||
+ depends LEDS_CLASS && AR7
|
||||
+ help
|
||||
+ This option enables support for the LEDs on TI AR7.
|
||||
+
|
||||
config LEDS_CORGI
|
||||
tristate "LED Support for the Sharp SL-C7x0 series"
|
||||
depends LEDS_CLASS && PXA_SHARP_C7xx
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100
|
||||
@@ -5,6 +5,7 @@
|
||||
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
||||
|
||||
# LED Platform Drivers
|
||||
+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o
|
||||
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
|
||||
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
|
||||
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100
|
||||
@@ -544,6 +544,12 @@
|
||||
|
||||
# MIPS Architecture
|
||||
|
||||
+config AR7_WDT
|
||||
+ tristate "TI AR7 Watchdog Timer"
|
||||
+ depends on WATCHDOG && AR7
|
||||
+ help
|
||||
+ Hardware driver for the TI AR7 Watchdog Timer.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on WATCHDOG && SGI_IP22
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100
|
||||
@@ -71,6 +71,7 @@
|
||||
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
|
||||
|
||||
# MIPS Architecture
|
||||
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
|
||||
# S390 Architecture
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig
|
||||
--- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -1777,6 +1777,15 @@
|
||||
workstations.
|
||||
See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
|
||||
|
||||
+config CPMAC
|
||||
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
|
||||
+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
|
||||
+ select PHYLIB
|
||||
+ select FIXED_PHY
|
||||
+ select FIXED_MII_100_FDX
|
||||
+ help
|
||||
+ TI AR7 CPMAC Ethernet support
|
||||
+
|
||||
config NET_POCKET
|
||||
bool "Pocket and portable adapters"
|
||||
depends on NET_ETHERNET && PARPORT
|
||||
diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile
|
||||
--- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -148,6 +148,7 @@
|
||||
obj-$(CONFIG_8139TOO) += 8139too.o
|
||||
obj-$(CONFIG_ZNET) += znet.o
|
||||
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
|
||||
+obj-$(CONFIG_CPMAC) += cpmac.o
|
||||
obj-$(CONFIG_DEPCA) += depca.o
|
||||
obj-$(CONFIG_EWRK3) += ewrk3.o
|
||||
obj-$(CONFIG_ATP) += atp.o
|
||||
|
|
@ -1,94 +0,0 @@
|
|||
Index: linux-2.6.21.4/drivers/net/phy/fixed.c
|
||||
===================================================================
|
||||
--- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200
|
||||
+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200
|
||||
@@ -187,6 +187,19 @@
|
||||
.driver = { .owner = THIS_MODULE,},
|
||||
};
|
||||
|
||||
+static void fixed_mdio_release (struct device * dev)
|
||||
+{
|
||||
+ struct phy_device *phydev = container_of(dev, struct phy_device, dev);
|
||||
+ struct mii_bus *bus = phydev->bus;
|
||||
+ struct fixed_info *fixed = bus->priv;
|
||||
+
|
||||
+ kfree(phydev);
|
||||
+ kfree(bus->dev);
|
||||
+ kfree(bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+}
|
||||
+
|
||||
/*-----------------------------------------------------------------------------
|
||||
* This func is used to create all the necessary stuff, bind
|
||||
* the fixed phy driver and register all it on the mdio_bus_type.
|
||||
@@ -221,6 +234,12 @@
|
||||
}
|
||||
|
||||
fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
|
||||
+ if (NULL == fixed->regs) {
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
fixed->regs_num = MII_REGS_NUM;
|
||||
fixed->phy_status.speed = speed;
|
||||
fixed->phy_status.duplex = duplex;
|
||||
@@ -249,8 +268,11 @@
|
||||
fixed->phydev = phydev;
|
||||
|
||||
if(NULL == phydev) {
|
||||
- err = -ENOMEM;
|
||||
- goto device_create_fail;
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
}
|
||||
|
||||
phydev->irq = PHY_IGNORE_INTERRUPT;
|
||||
@@ -262,8 +284,34 @@
|
||||
else
|
||||
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
|
||||
"fixed@%d:%d", speed, duplex);
|
||||
+
|
||||
phydev->bus = new_bus;
|
||||
|
||||
+#if 1
|
||||
+ phydev->dev.driver = &fixed_mdio_driver.driver;
|
||||
+ phydev->dev.release = fixed_mdio_release;
|
||||
+
|
||||
+ err = phydev->dev.driver->probe(&phydev->dev);
|
||||
+ if(err < 0) {
|
||||
+ printk(KERN_ERR "Phy %s: problems with fixed driver\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ kfree(phydev);
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return err;
|
||||
+ }
|
||||
+
|
||||
+ down_write(&phydev->dev.bus->subsys.rwsem);
|
||||
+ err = device_register(&phydev->dev);
|
||||
+ if(err) {
|
||||
+ printk(KERN_ERR "Phy %s failed to register\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+#else
|
||||
err = device_register(&phydev->dev);
|
||||
if(err) {
|
||||
printk(KERN_ERR "Phy %s failed to register\n",
|
||||
@@ -306,6 +354,7 @@
|
||||
kfree(fixed);
|
||||
|
||||
return err;
|
||||
+#endif
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1,52 +0,0 @@
|
|||
diff -Nru linux-2.6.19.2/include/linux/serialP.h linux-ar7/include/linux/serialP.h
|
||||
--- linux-2.6.19.2/include/linux/serialP.h 2007-01-17 01:24:01.000000000 +0700
|
||||
+++ linux-ar7/include/linux/serialP.h 2007-03-22 22:36:48.000000000 +0700
|
||||
@@ -135,6 +135,9 @@
|
||||
* the interrupt line _up_ instead of down, so if we register the IRQ
|
||||
* while the UART is in that state, we die in an IRQ storm. */
|
||||
#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
|
||||
+#elif defined(CONFIG_AR7)
|
||||
+/* This is how it is set up by bootloader... */
|
||||
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR)
|
||||
#else
|
||||
#define ALPHA_KLUDGE_MCR 0
|
||||
#endif
|
||||
diff -Nru linux-2.6.19.2/include/linux/serial_core.h linux-ar7/include/linux/serial_core.h
|
||||
--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/include/linux/serial_core.h 2007-03-22 22:50:13.000000000 +0700
|
||||
@@ -39,7 +39,8 @@
|
||||
#define PORT_RSA 13
|
||||
#define PORT_NS16550A 14
|
||||
#define PORT_XSCALE 15
|
||||
-#define PORT_MAX_8250 15 /* max port ID */
|
||||
+#define PORT_AR7 16
|
||||
+#define PORT_MAX_8250 16 /* max port ID */
|
||||
|
||||
/*
|
||||
* ARM specific type numbers. These are not currently guaranteed
|
||||
diff -Nru linux-2.6.19.2/drivers/serial/8250.c linux-ar7/drivers/serial/8250.c
|
||||
--- linux-2.6.19.2/drivers/serial/8250.c 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/drivers/serial/8250.c 2007-03-22 22:45:17.000000000 +0700
|
||||
@@ -251,6 +251,13 @@
|
||||
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
|
||||
.flags = UART_CAP_FIFO | UART_CAP_UUE,
|
||||
},
|
||||
+ [PORT_AR7] = {
|
||||
+ .name = "TI-AR7",
|
||||
+ .fifo_size = 16,
|
||||
+ .tx_loadsz = 16,
|
||||
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
|
||||
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
|
||||
+ },
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SERIAL_8250_AU1X00
|
||||
@@ -2243,7 +2250,7 @@
|
||||
{
|
||||
struct uart_8250_port *up = (struct uart_8250_port *)port;
|
||||
|
||||
- wait_for_xmitr(up, UART_LSR_THRE);
|
||||
+ wait_for_xmitr(up, BOTH_EMPTY);
|
||||
serial_out(up, UART_TX, ch);
|
||||
}
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
--- linux-2.6.19.orig/scripts/setlocalversion 2006-11-30 04:57:37.000000000 +0700
|
||||
+++ linux-2.6.19/scripts/setlocalversion 2006-12-25 12:50:53.000000000 +0700
|
||||
@@ -1,6 +1,8 @@
|
||||
#!/bin/sh
|
||||
# Print additional version information for non-release trees.
|
||||
|
||||
+exit 0
|
||||
+
|
||||
usage() {
|
||||
echo "Usage: $0 [srctree]" >&2
|
||||
exit 1
|
||||
Loading…
Reference in New Issue