add support for more lantiq AR9 boards

SVN-Revision: 27694

target/linux/lantiq/ar9/profiles/003-buffalo.mk

@@ -0,0 +1,11 @@
+define Profile/WBMR
+  NAME:=WBMR - Buffalo WBMR-HP-G300H
+  PACKAGES:= kmod-usb-core kmod-usb-dwc-otg kmod-leds-gpio \
+	 kmod-ltq-dsl-firmware-b kmod-ledtrig-usbdev 
+endef
+
+define Profile/WBMR/Description
+	Package set optimized for the Buffalo WBMR routers
+endef
+
+$(eval $(call Profile,WBMR))

target/linux/lantiq/danube/config-default

@@ -28,6 +28,7 @@ CONFIG_LANTIQ_MACH_ARV45XX=y
 CONFIG_LANTIQ_MACH_EASY50712=y
 # CONFIG_LANTIQ_MACH_NETGEAR is not set
 CONFIG_LANTIQ_MACH_GIGASX76X=y
+CONFIG_LANTIQ_MACH_WBMR=y
 CONFIG_MACH_NO_WESTBRIDGE=y
 # CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
 CONFIG_NEED_DMA_MAP_STATE=y

target/linux/lantiq/image/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/image.mk
 
 JFFS2_BLOCKSIZE = 64k 128k 256k
 
-ase_cmdline=-console=ttyLTQ1,115200 rootfstype=squashfs,jffs2
+ase_cmdline=-console=ttyLTQ0,115200 rootfstype=squashfs,jffs2
 xway_cmdline=-console=ttyLTQ1,115200 rootfstype=squashfs,jffs2
 falcon_cmdline=-console=ttyLTQ0,115200 rootfstype=squashfs,jffs2
 
@@ -199,6 +199,14 @@ endef
 endif
 
 ifeq ($(CONFIG_TARGET_lantiq_ar9),y)
+define Image/BuildKernel/Profile/WBMR
+	$(call Image/BuildKernel/Template,WBMR,$(xway_cmdline))
+endef
+
+define Image/Build/Profile/WBMR
+	$(call Image/Build/$(1),$(1),WBMR)
+endef
+
 define Image/BuildKernel/Profile/DGN3500B
 	$(call Image/BuildKernel/Template,DGN3500B,$(xway_cmdline))
 endef
@@ -208,11 +216,13 @@ define Image/Build/Profile/DGN3500B
 endef
 
 define Image/BuildKernel/Profile/Generic
+	$(call Image/BuildKernel/Template,WBMR,$(xway_cmdline))
 	$(call Image/BuildKernel/Template,DGN3500B,$(xway_cmdline))
 	$(call Image/BuildKernel/Template,NONE)
 endef
 
 define Image/Build/Profile/Generic
+	$(call Image/Build/$(1),$(1),WBMR)
 	$(call Image/Build/$(1),$(1),DGN3500B)
 	$(call Image/Build/$(1),$(1),NONE)
 	$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).rootfs

target/linux/lantiq/patches-2.6.39/602-wbmr.patch

@@ -0,0 +1,157 @@
+--- a/arch/mips/lantiq/machtypes.h
++++ b/arch/mips/lantiq/machtypes.h
+@@ -40,6 +40,9 @@
+ 
+ 	/* Gigaset */
+ 	LANTIQ_MACH_GIGASX76X,		/* Gigaset SX76x */
++
++	/* Buffalo */
++	LANTIQ_MACH_WBMR,		/* WBMR-HP-G300H */
+ };
+ 
+ #endif
+--- a/arch/mips/lantiq/xway/Kconfig
++++ b/arch/mips/lantiq/xway/Kconfig
+@@ -19,6 +19,11 @@
+ 	select LTQ_DEV_GPIO_BUTTONS
+ 	default y
+ 
++config LANTIQ_MACH_WBMR
++	bool "WBMR-HP-G300H"
++	select LTQ_DEV_GPIO_BUTTONS
++	default y
++
+ endmenu
+ 
+ endif
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -8,4 +8,5 @@
+ obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
+ obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
+ obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o
++obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o
+ obj-y += dev-dwc_otg.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/mach-wbmr.c
+@@ -0,0 +1,120 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/gpio.h>
++#include <linux/gpio_buttons.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++
++#include <lantiq_soc.h>
++#include <irq.h>
++
++#include "../machtypes.h"
++#include "devices.h"
++#include "dev-leds-gpio.h"
++#include "dev-dwc_otg.h"
++#include "../dev-gpio-buttons.h"
++
++static struct mtd_partition wbmr_partitions[] =
++{
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x40000,
++	},
++	{
++		.name	= "uboot-env",
++		.offset	= 0x40000,
++		.size	= 0x20000,
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x60000,
++		.size	= 0x1f20000,
++	},
++	{
++		.name	= "calibration",
++		.offset	= 0x1fe0000,
++		.size	= 0x20000,
++	},
++};
++
++static struct physmap_flash_data wbmr_flash_data = {
++	.nr_parts	= ARRAY_SIZE(wbmr_partitions),
++	.parts		= wbmr_partitions,
++};
++
++static struct gpio_led
++wbmr_leds_gpio[] __initdata = {
++	{ .name = "soc:blue:movie", .gpio = 20, .active_low = 1, },
++	{ .name = "soc:red:internet", .gpio = 18, .active_low = 1, },
++	{ .name = "soc:green:internet", .gpio = 17, .active_low = 1, },
++	{ .name = "soc:green:adsl", .gpio = 16, .active_low = 1, },
++	{ .name = "soc:green:wlan", .gpio = 15, .active_low = 1, },
++	{ .name = "soc:red:security", .gpio = 14, .active_low = 1, },
++	{ .name = "soc:green:power", .gpio = 1, .active_low = 1, },
++	{ .name = "soc:red:power", .gpio = 5, .active_low = 1, },
++	{ .name = "soc:green:usb", .gpio = 28, .active_low = 1, },
++};
++
++static struct gpio_keys_button
++wbmr_gpio_keys[] __initdata = {
++	{
++		.desc = "aoss",
++		.type = EV_KEY,
++		.code = BTN_0,
++		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = 0,
++		.active_low = 1,
++	},
++	{
++		.desc = "reset",
++		.type = EV_KEY,
++		.code = BTN_1,
++		.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = 37,
++		.active_low = 1,
++	},
++};
++
++static struct ltq_pci_data ltq_pci_data = {
++	.clock      = PCI_CLOCK_INT,
++	.gpio   = PCI_GNT1 | PCI_REQ1,
++	.irq    = {
++		[14] = INT_NUM_IM0_IRL0 + 22,
++	},
++};
++
++static struct ltq_eth_data ltq_eth_data = {
++	.mii_mode = PHY_INTERFACE_MODE_MII,
++};
++
++static void __init
++wbmr_init(void)
++{
++#define WMBR_BRN_MAC			0x1fd0024
++
++	ltq_add_device_leds_gpio(-1, ARRAY_SIZE(wbmr_leds_gpio), wbmr_leds_gpio);
++	ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys);
++	ltq_register_nor(&wbmr_flash_data);
++	ltq_register_pci(&ltq_pci_data);
++	memcpy_fromio(&ltq_eth_data.mac.sa_data,
++		(void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6);
++	ltq_register_etop(&ltq_eth_data);
++	xway_register_dwc(36);
++}
++
++MIPS_MACHINE(LANTIQ_MACH_WBMR,
++			"WBMR",
++			"WBMR",
++			wbmr_init);