target: replace remaining occurrences of ifconfig with ip

ifconfig is effectively deprecated for quite some time now. Let's
replace the remaining occurrences for our target setup by the
corresponding ip commands now.

Note that this does not touch ar71xx, as it will be dropped anyway,
and changing it would only make backports harder.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Adrian Schmutzler 2020-07-30 17:25:20 +02:00
parent 1d9542c50e
commit 356866c481
5 changed files with 9 additions and 8 deletions

View File

@ -5,7 +5,7 @@ preinit_set_mac_address() {
meraki,mr24|\
meraki,mx60)
mac_lan=$(mtd_get_mac_binary_ubi board-config 0x66)
[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
[ -n "$mac_lan" ] && ip link set eth0 address "$mac_lan"
;;
esac
}

View File

@ -5,7 +5,7 @@ preinit_ip() {
if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
vconfig set_name_type DEV_PLUS_VID_NO_PAD
ifconfig eth0 up
ip link set eth0 up
vconfig add eth0 1
ifname=eth0.1
else
@ -15,7 +15,8 @@ preinit_ip() {
}
fi
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
ip addr add $pi_ip/$pi_netmask broadcast $pi_broadcast dev $pi_ifname
ip link set $pi_ifname up
}
}
@ -26,8 +27,8 @@ preinit_ip_deconfig() {
if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
vconfig rem eth0.1 2>/dev/null
ifconfig $pi_ifname down
ip link set $pi_ifname down
elif [ -n "$pi_ifname" ]; then
ifconfig $pi_ifname 0.0.0.0
ip -4 addr flush dev $pi_ifname
fi
}

View File

@ -1,5 +1,5 @@
set_preinit_iface() {
ifconfig eth0 up
ip link set eth0 up
ifname=lan1
}

View File

@ -14,7 +14,7 @@ mt7621_bringup_dsa_master() {
;;
esac
ifconfig $masterif up
ip link set $masterif up
}
boot_hook_add preinit_main mt7621_bringup_dsa_master

View File

@ -4,7 +4,7 @@ do_b53_hack() {
# hack: enable switch on Lamobo R1 and reset counters
case $(board_name) in
lamobo,lamobo-r1)
ifconfig eth0 up
ip link set eth0 up
sleep 1
swconfig dev switch0 set reset 1
swconfig dev switch0 set reset_mib 1