mirror of https://github.com/hak5/openwrt.git
mpc85xx: Remove kernel 4.14 support
This target was switched to kernel 4.19 more than 6 months ago in commit
f342ffd300 ("treewide: kernel: bump some targets to 4.19") and now
with kernel 5.4 support being added it gets harder to support kernel
4.14 in addition to kernel 4.19 and 5.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
master
Hauke Mehrtens
parent
734534ca60
commit
353cafbec6
|
|
@ -1,365 +0,0 @@
|
|||
# CONFIG_40x is not set
|
||||
# CONFIG_44x is not set
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
CONFIG_AR8216_PHY=y
|
||||
CONFIG_AR8216_PHY_LEDS=y
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
|
||||
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
|
||||
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
|
||||
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
|
||||
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
|
||||
CONFIG_ARCH_HAS_SG_CHAIN=y
|
||||
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
|
||||
# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
|
||||
CONFIG_ARCH_HAS_WALK_MEMORY=y
|
||||
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=11
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
|
||||
# CONFIG_ARCH_RANDOM is not set
|
||||
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
||||
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
|
||||
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
|
||||
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
|
||||
CONFIG_ASN1=y
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BOOKE=y
|
||||
CONFIG_BOOKE_WDT=y
|
||||
CONFIG_BOUNCE=y
|
||||
# CONFIG_BSC9131_RDB is not set
|
||||
# CONFIG_BSC9132_QDS is not set
|
||||
# CONFIG_C293_PCIE is not set
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CLZ_TAB=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
# CONFIG_CORENET_GENERIC is not set
|
||||
# CONFIG_CPM2 is not set
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
# CONFIG_CRYPTO_AES_PPC_SPE is not set
|
||||
CONFIG_CRYPTO_AKCIPHER=y
|
||||
CONFIG_CRYPTO_AKCIPHER2=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
# CONFIG_CRYPTO_MD5_PPC is not set
|
||||
CONFIG_CRYPTO_NULL=y
|
||||
CONFIG_CRYPTO_NULL2=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_RSA=y
|
||||
# CONFIG_CRYPTO_SHA1_PPC is not set
|
||||
# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
|
||||
# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEFAULT_UIMAGE is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_E200 is not set
|
||||
CONFIG_E500=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_EPAPR_BOOT is not set
|
||||
CONFIG_ETHERNET_PACKET_MANGLE=y
|
||||
# CONFIG_FHCI_DEBUG is not set
|
||||
CONFIG_FIXED_PHY=y
|
||||
# CONFIG_FORCE_SMP is not set
|
||||
CONFIG_FSL_BOOKE=y
|
||||
# CONFIG_FSL_DPAA is not set
|
||||
CONFIG_FSL_EMB_PERFMON=y
|
||||
# CONFIG_FSL_FMAN is not set
|
||||
CONFIG_FSL_GTM=y
|
||||
CONFIG_FSL_LBC=y
|
||||
CONFIG_FSL_PCI=y
|
||||
CONFIG_FSL_PQ_MDIO=y
|
||||
CONFIG_FSL_SOC=y
|
||||
CONFIG_FSL_SOC_BOOKE=y
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
# CONFIG_GENERIC_CSUM is not set
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_ISA_DMA=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
# CONFIG_GENERIC_TBSYNC is not set
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GEN_RTC=y
|
||||
# CONFIG_GE_FPGA is not set
|
||||
# CONFIG_GE_IMP3A is not set
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_GRO_CELLS is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
# CONFIG_HAS_RAPIDIO is not set
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
||||
# CONFIG_HAVE_ARCH_BITREVERSE is not set
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_CBPF_JIT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
||||
CONFIG_HAVE_GENERIC_GUP=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IOREMAP_PROT=y
|
||||
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
|
||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_HAVE_KPROBES_ON_FTRACE=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PERF_REGS=y
|
||||
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
|
||||
# CONFIG_HIVEAP_330 is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
CONFIG_HZ_PERIODIC=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IOMMU_HELPER=y
|
||||
# CONFIG_IPIC is not set
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_KERNEL_GZIP=y
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
# CONFIG_KSI8560 is not set
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOWMEM_CAM_NUM=3
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
CONFIG_LXT_PHY=y
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MIGRATION=y
|
||||
# CONFIG_MMIO_NVRAM is not set
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
# CONFIG_MPC8536_DS is not set
|
||||
# CONFIG_MPC8540_ADS is not set
|
||||
# CONFIG_MPC8560_ADS is not set
|
||||
# CONFIG_MPC85xx_CDS is not set
|
||||
# CONFIG_MPC85xx_DS is not set
|
||||
# CONFIG_MPC85xx_MDS is not set
|
||||
# CONFIG_MPC85xx_RDB is not set
|
||||
CONFIG_MPIC=y
|
||||
# CONFIG_MPIC_MSGR is not set
|
||||
CONFIG_MPIC_TIMER=y
|
||||
# CONFIG_MPIC_U3_HT_IRQS is not set
|
||||
# CONFIG_MPIC_WEIRD is not set
|
||||
CONFIG_MPILIB=y
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
# CONFIG_MVME2500 is not set
|
||||
# CONFIG_NEED_DMA_MAP_STATE is not set
|
||||
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NLS=y
|
||||
# CONFIG_NONSTATIC_KERNEL is not set
|
||||
CONFIG_NO_BOOTMEM=y
|
||||
CONFIG_NR_IRQS=512
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_ADDRESS_PCI=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_OF_RESERVED_MEM=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND=y
|
||||
# CONFIG_P1010_RDB is not set
|
||||
# CONFIG_P1022_DS is not set
|
||||
# CONFIG_P1022_RDK is not set
|
||||
# CONFIG_P1023_RDB is not set
|
||||
CONFIG_PAGE_OFFSET=0xc0000000
|
||||
# CONFIG_PANDA is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
# CONFIG_PCIEASPM_DEBUG is not set
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYSICAL_ALIGN=0x04000000
|
||||
CONFIG_PHYSICAL_START=0x00000000
|
||||
# CONFIG_PHYS_64BIT is not set
|
||||
# CONFIG_PPA8548 is not set
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
# CONFIG_PPC64 is not set
|
||||
CONFIG_PPC_85xx=y
|
||||
# CONFIG_PPC_8xx is not set
|
||||
# CONFIG_PPC_970_NAP is not set
|
||||
CONFIG_PPC_ADV_DEBUG_DACS=2
|
||||
CONFIG_PPC_ADV_DEBUG_DVCS=0
|
||||
CONFIG_PPC_ADV_DEBUG_IACS=2
|
||||
CONFIG_PPC_ADV_DEBUG_REGS=y
|
||||
CONFIG_PPC_BOOK3E_MMU=y
|
||||
# CONFIG_PPC_BOOK3S_32 is not set
|
||||
# CONFIG_PPC_CELL is not set
|
||||
# CONFIG_PPC_CELL_NATIVE is not set
|
||||
# CONFIG_PPC_COPRO_BASE is not set
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
# CONFIG_PPC_DCR_NATIVE is not set
|
||||
CONFIG_PPC_DOORBELL=y
|
||||
# CONFIG_PPC_E500MC is not set
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
# CONFIG_PPC_EPAPR_HV_PIC is not set
|
||||
CONFIG_PPC_FSL_BOOK3E=y
|
||||
# CONFIG_PPC_I8259 is not set
|
||||
# CONFIG_PPC_ICP_HV is not set
|
||||
# CONFIG_PPC_ICP_NATIVE is not set
|
||||
# CONFIG_PPC_ICS_RTAS is not set
|
||||
CONFIG_PPC_INDIRECT_PCI=y
|
||||
CONFIG_PPC_MMU_NOHASH=y
|
||||
# CONFIG_PPC_MM_SLICES is not set
|
||||
# CONFIG_PPC_MPC106 is not set
|
||||
# CONFIG_PPC_P7_NAP is not set
|
||||
CONFIG_PPC_PCI_CHOICE=y
|
||||
# CONFIG_PPC_PTDUMP is not set
|
||||
# CONFIG_PPC_QEMU_E500 is not set
|
||||
# CONFIG_PPC_RTAS is not set
|
||||
CONFIG_PPC_SMP_MUXED_IPI=y
|
||||
CONFIG_PPC_UDBG_16550=y
|
||||
CONFIG_PPC_WERROR=y
|
||||
# CONFIG_PPC_XICS is not set
|
||||
# CONFIG_PPC_XIVE is not set
|
||||
# CONFIG_PPC_XIVE_SPAPR is not set
|
||||
# CONFIG_PQ2ADS is not set
|
||||
CONFIG_QE_GPIO=y
|
||||
CONFIG_QE_USB=y
|
||||
CONFIG_QUICC_ENGINE=y
|
||||
CONFIG_RAS=y
|
||||
# CONFIG_RCU_NEED_SEGCBLIST is not set
|
||||
# CONFIG_RCU_STALL_COMMON is not set
|
||||
# CONFIG_RED_15W_REV1 is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_GENERIC=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RTC_MC146818_LIB=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
# CONFIG_SBC8548 is not set
|
||||
# CONFIG_SCHED_INFO is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SERIAL_QE is not set
|
||||
CONFIG_SIMPLE_GPIO=y
|
||||
# CONFIG_SOCRATES is not set
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPE=y
|
||||
CONFIG_SPE_POSSIBLE=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_FSL_ESPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SRCU=y
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
# CONFIG_STX_GP3 is not set
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
CONFIG_TASK_SIZE=0xc0000000
|
||||
CONFIG_THREAD_SHIFT=13
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TINY_SRCU=y
|
||||
# CONFIG_TL_WDR4900_V1 is not set
|
||||
# CONFIG_TQM8540 is not set
|
||||
# CONFIG_TQM8541 is not set
|
||||
# CONFIG_TQM8548 is not set
|
||||
# CONFIG_TQM8555 is not set
|
||||
# CONFIG_TQM8560 is not set
|
||||
# CONFIG_TWR_P102x is not set
|
||||
CONFIG_UCC=y
|
||||
CONFIG_UCC_FAST=y
|
||||
CONFIG_UCC_GETH=y
|
||||
# CONFIG_UGETH_TX_ON_DEMAND is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_VDSO32=y
|
||||
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_XES_MPC85xx is not set
|
||||
# CONFIG_XPS_USB_HCD_XILINX is not set
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
--- a/arch/powerpc/platforms/85xx/common.c
|
||||
+++ b/arch/powerpc/platforms/85xx/common.c
|
||||
@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx
|
||||
{ .compatible = "fsl,mpc8548-guts", },
|
||||
/* Probably unnecessary? */
|
||||
{ .compatible = "gpio-leds", },
|
||||
+ { .compatible = "gpio-keys", },
|
||||
/* For all PCI controllers */
|
||||
{ .compatible = "fsl,mpc8540-pci", },
|
||||
{ .compatible = "fsl,mpc8548-pcie", },
|
||||
|
|
@ -1,82 +0,0 @@
|
|||
From 53bc6ae5da3b2902581c30ac2568f51ce35e7624 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Wed, 20 Feb 2013 08:40:33 +0100
|
||||
Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
|
||||
board
|
||||
|
||||
This patch adds support for the TP-Link TL-WDR4900 v1
|
||||
concurrent dual-band wireless router. The devices uses
|
||||
the Freescale P1014 SoC.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/Makefile | 3 ++-
|
||||
arch/powerpc/boot/wrapper | 5 +++++
|
||||
arch/powerpc/platforms/85xx/Kconfig | 11 +++++++++++
|
||||
arch/powerpc/platforms/85xx/Makefile | 1 +
|
||||
4 files changed, 19 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -156,6 +156,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
|
||||
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
|
||||
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
|
||||
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
|
||||
+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
|
||||
|
||||
src-wlib := $(sort $(src-wlib-y))
|
||||
src-plat := $(sort $(src-plat-y))
|
||||
@@ -335,7 +336,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
|
||||
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
||||
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
||||
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
||||
-
|
||||
+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
|
||||
# Board ports in arch/powerpc/platform/86xx/Kconfig
|
||||
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
|
||||
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -302,6 +302,11 @@ adder875-redboot)
|
||||
platformo="$object/fixed-head.o $object/redboot-8xx.o"
|
||||
binary=y
|
||||
;;
|
||||
+simpleboot-tl-wdr4900-v1)
|
||||
+ platformo="$object/fixed-head.o $object/simpleboot.o"
|
||||
+ link_address='0x1000000'
|
||||
+ binary=y
|
||||
+ ;;
|
||||
simpleboot-virtex405-*)
|
||||
platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
|
||||
binary=y
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -170,6 +170,17 @@ config STX_GP3
|
||||
select CPM2
|
||||
select DEFAULT_UIMAGE
|
||||
|
||||
+config TL_WDR4900_V1
|
||||
+ bool "TP-Link TL-WDR4900 v1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the TP-Link TL-WDR4900 v1 board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless router with a
|
||||
+ Freescale P1014 SoC.
|
||||
+
|
||||
config TQM8540
|
||||
bool "TQ Components TQM8540"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
obj-$(CONFIG_SBC8548) += sbc8548.o
|
||||
obj-$(CONFIG_PPA8548) += ppa8548.o
|
||||
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -49,6 +49,17 @@ config BSC9132_QDS
|
||||
and dual StarCore SC3850 DSP cores.
|
||||
Manufacturer : Freescale Semiconductor, Inc
|
||||
|
||||
+config HIVEAP_330
|
||||
+ bool "Aerohive HiveAP-330"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Aerohive HiveAP-330 board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-y += common.o
|
||||
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
|
||||
obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
|
||||
obj-$(CONFIG_C293_PCIE) += c293pcie.o
|
||||
+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
|
||||
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
|
||||
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
|
||||
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
--- a/arch/powerpc/Kconfig
|
||||
+++ b/arch/powerpc/Kconfig
|
||||
@@ -837,6 +837,14 @@ config CMDLINE_FORCE
|
||||
This is useful if you cannot or don't want to change the
|
||||
command-line options your boot loader passes to the kernel.
|
||||
|
||||
+config CMDLINE_OVERRIDE
|
||||
+ bool "Use alternative cmdline from device tree"
|
||||
+ help
|
||||
+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
|
||||
+ be used, this is not a good option for kernels that are shared across
|
||||
+ devices. This setting enables using "chosen/cmdline-override" as the
|
||||
+ cmdline if it exists in the device tree.
|
||||
+
|
||||
config EXTRA_TARGETS
|
||||
string "Additional default image types"
|
||||
help
|
||||
--- a/drivers/of/fdt.c
|
||||
+++ b/drivers/of/fdt.c
|
||||
@@ -1131,6 +1131,17 @@ int __init early_init_dt_scan_chosen(uns
|
||||
if (p != NULL && l > 0)
|
||||
strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
|
||||
|
||||
+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
|
||||
+ * device tree option of chosen/bootargs-override. This is
|
||||
+ * helpful on boards where u-boot sets bootargs, and is unable
|
||||
+ * to be modified.
|
||||
+ */
|
||||
+#ifdef CONFIG_CMDLINE_OVERRIDE
|
||||
+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
|
||||
+ if (p != NULL && l > 0)
|
||||
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
|
||||
+#endif
|
||||
+
|
||||
/*
|
||||
* CONFIG_CMDLINE is meant to be a default in case nothing else
|
||||
* managed to set the command line, unless CONFIG_CMDLINE_FORCE
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
--- a/arch/powerpc/Makefile
|
||||
+++ b/arch/powerpc/Makefile
|
||||
@@ -23,6 +23,7 @@ CROSS32AR := $(CROSS32_COMPILE)ar
|
||||
ifeq ($(HAS_BIARCH),y)
|
||||
ifeq ($(CROSS32_COMPILE),)
|
||||
CROSS32CC := $(CC) -m32
|
||||
+CROSS32AR := $(AR)
|
||||
KBUILD_ARFLAGS += --target=elf32-powerpc
|
||||
endif
|
||||
endif
|
||||
|
|
@ -1,170 +0,0 @@
|
|||
From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Sun, 30 Dec 2018 23:24:41 +0100
|
||||
Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
|
||||
|
||||
This patch apply chages for OpenWRT in P2020RDB
|
||||
dts file.
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
|
||||
1 file changed, 63 insertions(+), 35 deletions(-)
|
||||
|
||||
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
@@ -2,6 +2,7 @@
|
||||
* P2020 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009-2012 Freescale Semiconductor Inc.
|
||||
+ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
@@ -9,10 +10,15 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
+/dts-v1/;
|
||||
+
|
||||
/include/ "p2020si-pre.dtsi"
|
||||
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
/ {
|
||||
- model = "fsl,P2020RDB";
|
||||
+ model = "Freescale P2020RDB";
|
||||
compatible = "fsl,P2020RDB";
|
||||
|
||||
aliases {
|
||||
@@ -38,48 +44,38 @@
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
- partition@0 {
|
||||
- /* This location must not be altered */
|
||||
- /* 256KB for Vitesse 7385 Switch firmware */
|
||||
- reg = <0x0 0x00040000>;
|
||||
- label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- partition@40000 {
|
||||
- /* 256KB for DTB Image */
|
||||
- reg = <0x00040000 0x00040000>;
|
||||
- label = "NOR (RO) DTB Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
|
||||
- partition@80000 {
|
||||
- /* 3.5 MB for Linux Kernel Image */
|
||||
- reg = <0x00080000 0x00380000>;
|
||||
- label = "NOR (RO) Linux Kernel Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partition@0 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 256KB for Vitesse 7385 Switch firmware */
|
||||
+ reg = <0x0 0x00040000>;
|
||||
+ label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
+ read-only;
|
||||
+ };
|
||||
|
||||
- partition@400000 {
|
||||
- /* 11MB for JFFS2 based Root file System */
|
||||
- reg = <0x00400000 0x00b00000>;
|
||||
- label = "NOR (RW) JFFS2 Root File System";
|
||||
- };
|
||||
+ partition@40000 {
|
||||
+ compatible = "denx,fit";
|
||||
+ reg = <0x00040000 0x00ec0000>;
|
||||
+ label = "firmware";
|
||||
+ };
|
||||
|
||||
- partition@f00000 {
|
||||
- /* This location must not be altered */
|
||||
- /* 512KB for u-boot Bootloader Image */
|
||||
- /* 512KB for u-boot Environment Variables */
|
||||
- reg = <0x00f00000 0x00100000>;
|
||||
- label = "NOR (RO) U-Boot Image";
|
||||
- read-only;
|
||||
+ partition@f00000 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 512KB for u-boot Bootloader Image */
|
||||
+ /* 512KB for u-boot Environment Variables */
|
||||
+ reg = <0x00f00000 0x00100000>;
|
||||
+ label = "u-boot";
|
||||
+ read-only;
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
@@ -144,13 +140,43 @@
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
+ gpio0: gpio-controller@fc00 {
|
||||
+ };
|
||||
+
|
||||
i2c@3000 {
|
||||
+ temperature-sensor@4c {
|
||||
+ compatible = "adi,adt7461";
|
||||
+ reg = <0x4c>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@50 {
|
||||
+ compatible = "atmel,24c256";
|
||||
+ reg = <0x50>;
|
||||
+ };
|
||||
+
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c@3100 {
|
||||
+ pmic@11 {
|
||||
+ compatible = "zl2006";
|
||||
+ reg = <0x11>;
|
||||
+ };
|
||||
+
|
||||
+ gpio@18 {
|
||||
+ compatible = "nxp,pca9557";
|
||||
+ reg = <0x18>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@52 {
|
||||
+ compatible = "atmel,24c01";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
@@ -204,10 +230,12 @@
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
tbi-phy@2 {
|
||||
device_type = "tbi-phy";
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -173,6 +173,16 @@ config XES_MPC85xx
|
||||
Manufacturer: Extreme Engineering Solutions, Inc.
|
||||
URL: <http://www.xes-inc.com/>
|
||||
|
||||
+config RED_15W_REV1
|
||||
+ bool "Sophos RED 15w Rev.1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the SOPHOS RED 15w Rev.1 board.
|
||||
+
|
||||
+ This board is a wireless VPN router with a Freescale P1010 SoC.
|
||||
+
|
||||
config STX_GP3
|
||||
bool "Silicon Turnkey Express GP3"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -60,6 +60,17 @@ config HIVEAP_330
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config PANDA
|
||||
+ bool "OCEDO PANDA"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the OCEDO PANDA board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
|
||||
obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
||||
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
|
||||
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
+obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
Loading…
Reference in New Issue