ath79: add support for ALFA Network AP121F

This commit ports support for the ALFA Network AP121F, a pocket-size
router with 1 Ethernet and 2.4 GHz WiFi based on the AR9331 SoC, to the
ath79 target (it was already supported in ar71xx; see commit 0c6165d2
for more details).

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[pepe2k@gmail.com: fixed GPIO polarity, included USB support, changed
DTS nodes order, moved WLAN LED trigger define to DTS, made U-Boot env
partition writable]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
master
Roger Pueyo Centelles 2019-07-04 14:08:10 +02:00 committed by Piotr Dymacz
parent 12840674d0
commit 334bbc5198
4 changed files with 148 additions and 0 deletions

View File

@ -12,6 +12,9 @@ case "$board" in
ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0"
ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04"
;;
alfa-network,ap121f)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
;;
avm,fritz300e)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"

View File

@ -11,6 +11,7 @@ ath79_setup_interfaces()
case "$board" in
adtran,bsap1800-v2|\
adtran,bsap1840|\
alfa-network,ap121f|\
aruba,ap-105|\
avm,fritz300e|\
devolo,dvl1200i|\

View File

@ -0,0 +1,134 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "ALFA Network AP121F";
compatible = "alfa-network,ap121f", "qca,ar9331";
aliases {
label-mac-device = &wmac;
led-boot = &vpn;
led-failsafe = &vpn;
led-upgrade = &vpn;
serial0 = &uart;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
switch {
label = "switch";
linux,code = <BTN_0>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "ap121f:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
vpn: vpn {
label = "ap121f:green:vpn";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
wlan {
label = "ap121f:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
};
art: partition@40000 {
label = "art";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xfb0000>;
};
};
};
};
&uart {
status = "okay";
};
&usb {
status = "okay";
dr_mode = "host";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

View File

@ -111,6 +111,16 @@ define Device/adtran_bsap1840
endef
TARGET_DEVICES += adtran_bsap1840
define Device/alfa-network_ap121f
ATH_SOC := ar9331
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AP121F
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage -swconfig
IMAGE_SIZE := 16064k
SUPPORTED_DEVICES += ap121f
endef
TARGET_DEVICES += alfa-network_ap121f
define Device/aruba_ap-105
ATH_SOC := ar7161
DEVICE_VENDOR := Aruba