hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ipq40xx: essedma: enable VLAN tag offload for single-port 

Enable the VLAN tag offloading mechanism for RGMII single-port devices.
This allows those devices to use 802.1Q VLANs on the ethernet port.

Previously, RX frames were double tagged, as the RX TAG removal flag was
not enabled and an additional 802.1Q header was inserted elsewhere in
the code.

On the TX side, tagging was completely not present for single-port
devices. Enable tagging if an 802.1Q frame should be transmitted and
disable the default tagging mechanism for single-port devices.

Tested on Aruba AP-303

Signed-off-by: David Bauer <mail@david-bauer.net>
master
David Bauer 2020-09-06 01:24:00 +02:00
parent e289f18347
commit 2e6c236abd
1 changed files with 4 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma.c
View File

@ -164,10 +164,8 @@ static void edma_configure_rx(struct edma_common_info *edma_cinfo)
/* Set Rx FIFO threshold to start to DMA data to host */
rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
if (!edma_cinfo->is_single_phy) {
/* Set RX remove vlan bit */
rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
}
edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
}
@ -1411,12 +1409,10 @@ netdev_tx_t edma_xmit(struct sk_buff *skb,
}
/* Check and mark VLAN tag offload */
if (!adapter->edma_cinfo->is_single_phy) {
if (unlikely(skb_vlan_tag_present(skb)))
flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
else if (adapter->default_vlan_tag)
flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
}
if (unlikely(skb_vlan_tag_present(skb)))
flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
else if (!adapter->edma_cinfo->is_single_phy && adapter->default_vlan_tag)
flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
/* Check and mark checksum offload */
if (likely(skb->ip_summed == CHECKSUM_PARTIAL))