ath9k: add more fixes for half/quarter rate support

SVN-Revision: 27562
lede-17.01
Felix Fietkau 2011-07-08 17:19:21 +00:00
parent 887b29bfbd
commit 2d0ecd63f5
7 changed files with 240 additions and 0 deletions

View File

@ -0,0 +1,16 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -100,6 +100,13 @@ static void ath9k_hw_set_clockrate(struc
if (conf_is_ht40(conf))
clockrate *= 2;
+ if (ah->curchan) {
+ if (IS_CHAN_HALF_RATE(ah->curchan))
+ clockrate /= 2;
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ clockrate /= 4;
+ }
+
common->clockrate = clockrate;
}

View File

@ -0,0 +1,14 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -88,7 +88,10 @@ static void ath9k_hw_set_clockrate(struc
struct ath_common *common = ath9k_hw_common(ah);
unsigned int clockrate;
- if (!ah->curchan) /* should really check for CCK instead */
+ /* AR9287 v1.3+ uses async FIFO and runs the MAC at 117 MHz */
+ if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah))
+ clockrate = 117;
+ else if (!ah->curchan) /* should really check for CCK instead */
clockrate = ATH9K_CLOCK_RATE_CCK;
else if (conf->channel->band == IEEE80211_BAND_2GHZ)
clockrate = ATH9K_CLOCK_RATE_2GHZ_OFDM;

View File

@ -0,0 +1,91 @@
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -951,25 +951,60 @@ static bool ath9k_hw_set_global_txtimeou
void ath9k_hw_init_global_settings(struct ath_hw *ah)
{
- struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_conf *conf = &common->hw->conf;
+ const struct ath9k_channel *chan = ah->curchan;
int acktimeout;
int slottime;
int sifstime;
+ int rx_lat = 0, tx_lat = 0, eifs = 0;
+ u32 reg;
ath_dbg(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
ah->misc_mode);
+ if (!chan)
+ return;
+
if (ah->misc_mode != 0)
REG_SET_BIT(ah, AR_PCU_MISC, ah->misc_mode);
- if (conf->channel && conf->channel->band == IEEE80211_BAND_5GHZ)
- sifstime = 16;
- else
- sifstime = 10;
+ rx_lat = 37;
+ tx_lat = 54;
+
+ if (IS_CHAN_HALF_RATE(chan)) {
+ eifs = 175;
+ rx_lat *= 2;
+ tx_lat *= 2;
+ if (IS_CHAN_A_FAST_CLOCK(ah, chan))
+ tx_lat += 11;
+
+ slottime = 13;
+ sifstime = 32;
+ } else if (IS_CHAN_QUARTER_RATE(chan)) {
+ eifs = 340;
+ rx_lat *= 4;
+ tx_lat *= 4;
+ if (IS_CHAN_A_FAST_CLOCK(ah, chan))
+ tx_lat += 22;
+
+ slottime = 21;
+ sifstime = 64;
+ } else {
+ eifs = REG_READ(ah, AR_D_GBL_IFS_EIFS);
+ reg = REG_READ(ah, AR_USEC);
+ rx_lat = MS(reg, AR_USEC_RX_LAT);
+ tx_lat = MS(reg, AR_USEC_TX_LAT);
+
+ slottime = ah->slottime;
+ if (IS_CHAN_5GHZ(chan))
+ sifstime = 16;
+ else
+ sifstime = 10;
+ }
/* As defined by IEEE 802.11-2007 17.3.8.6 */
- slottime = ah->slottime + 3 * ah->coverage_class;
- acktimeout = slottime + sifstime;
+ acktimeout = slottime + sifstime + 3 * ah->coverage_class;
/*
* Workaround for early ACK timeouts, add an offset to match the
@@ -981,11 +1016,19 @@ void ath9k_hw_init_global_settings(struc
if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
acktimeout += 64 - sifstime - ah->slottime;
- ath9k_hw_setslottime(ah, ah->slottime);
+ ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
ath9k_hw_set_cts_timeout(ah, acktimeout);
if (ah->globaltxtimeout != (u32) -1)
ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
+
+ REG_WRITE(ah, AR_D_GBL_IFS_EIFS, ath9k_hw_mac_to_clks(ah, eifs));
+ REG_RMW(ah, AR_USEC,
+ (common->clockrate - 1) |
+ SM(rx_lat, AR_USEC_RX_LAT) |
+ SM(tx_lat, AR_USEC_TX_LAT),
+ AR_USEC_TX_LAT | AR_USEC_RX_LAT | AR_USEC_USEC);
+
}
EXPORT_SYMBOL(ath9k_hw_init_global_settings);

View File

@ -0,0 +1,78 @@
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -499,45 +499,6 @@ void ar9002_hw_enable_async_fifo(struct
}
}
-/*
- * If Async FIFO is enabled, the following counters change as MAC now runs
- * at 117 Mhz instead of 88/44MHz when async FIFO is disabled.
- *
- * The values below tested for ht40 2 chain.
- * Overwrite the delay/timeouts initialized in process ini.
- */
-void ar9002_hw_update_async_fifo(struct ath_hw *ah)
-{
- if (AR_SREV_9287_13_OR_LATER(ah)) {
- REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
- AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_D_GBL_IFS_SLOT,
- AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_D_GBL_IFS_EIFS,
- AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR);
-
- REG_WRITE(ah, AR_TIME_OUT, AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_USEC, AR_USEC_ASYNC_FIFO_DUR);
-
- REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
- AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
- REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
- AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
- }
-}
-
-/*
- * We don't enable WEP aggregation on mac80211 but we keep this
- * around for HAL unification purposes.
- */
-void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah)
-{
- if (AR_SREV_9287_13_OR_LATER(ah)) {
- REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
- AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
- }
-}
-
/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
void ar9002_hw_attach_ops(struct ath_hw *ah)
{
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1633,9 +1633,13 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_init_global_settings(ah);
- if (!AR_SREV_9300_20_OR_LATER(ah)) {
- ar9002_hw_update_async_fifo(ah);
- ar9002_hw_enable_wep_aggregation(ah);
+ if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) {
+ REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
+ AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
+ REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
+ AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
+ REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
+ AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
}
REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -984,8 +984,6 @@ void ath9k_hw_get_delta_slope_vals(struc
void ar9002_hw_cck_chan14_spread(struct ath_hw *ah);
int ar9002_hw_rf_claim(struct ath_hw *ah);
void ar9002_hw_enable_async_fifo(struct ath_hw *ah);
-void ar9002_hw_update_async_fifo(struct ath_hw *ah);
-void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah);
/*
* Code specific to AR9003, we stuff these here to avoid callbacks

View File

@ -0,0 +1,13 @@
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -111,7 +111,9 @@ static int ar9002_hw_set_channel(struct
switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
case 0:
- if ((freq % 20) == 0)
+ if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))
+ aModeRefSel = 0;
+ else if ((freq % 20) == 0)
aModeRefSel = 3;
else if ((freq % 10) == 0)
aModeRefSel = 2;

View File

@ -0,0 +1,14 @@
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -627,6 +627,11 @@ static void ar5008_hw_init_bb(struct ath
else
synthDelay /= 10;
+ if (IS_CHAN_HALF_RATE(chan))
+ synthDelay *= 2;
+ else if (IS_CHAN_QUARTER_RATE(chan))
+ synthDelay *= 4;
+
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
udelay(synthDelay + BASE_ACTIVATE_DELAY);

View File

@ -0,0 +1,14 @@
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -131,8 +131,9 @@ static int ar9002_hw_set_channel(struct
channelSel = CHANSEL_5G(freq);
/* RefDivA setting */
- REG_RMW_FIELD(ah, AR_AN_SYNTH9,
- AR_AN_SYNTH9_REFDIVA, refDivA);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_SYNTH9,
+ AR_AN_SYNTH9_REFDIVA,
+ AR_AN_SYNTH9_REFDIVA_S, refDivA);
}