ipq40xx: fix GL.iNet GL-B1300 support

Rename the dts file to match the used SoC type and drop the unnecessary
KERNEL_INSTALL from the image build code.

Remove the fixed rootfs and kernel partitions and create an image with
rootfs appended after kernel.

Setup a switch portmap matching the hardware and a default network/switch
configuration to make make the second lan port working. Use eth0 as lan
to have it consistent accross the target.

Use the power LED to indicate the boot status.

Sort the SoC entries within the dts by address and use dtc labels
whenever possible.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
openwrt-18.06
Mathias Kresin 2018-02-17 09:07:54 +01:00
parent 9f437b2cf3
commit 249a9b35e0
4 changed files with 322 additions and 6 deletions

View File

@ -17,7 +17,11 @@ avm,fritzbox-4040)
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
glinet,gl-b1300 |\
glinet,gl-b1300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan"
;;
openmesh,a42)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;

View File

@ -0,0 +1,313 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "GL.iNet GL-B1300";
compatible = "glinet,gl-b1300", "qcom,ipq4019";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
reserved-memory {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
apps_bl@87000000 {
reg = <0x87000000 0x400000>;
no-map;
};
sbl@87400000 {
reg = <0x87400000 0x100000>;
no-map;
};
cnss_debug@87500000 {
reg = <0x87500000 0x600000>;
no-map;
};
cpu_context_dump@87b00000 {
reg = <0x87b00000 0x080000>;
no-map;
};
tz_apps@87b80000 {
reg = <0x87b80000 0x280000>;
no-map;
};
smem@87e00000 {
reg = <0x87e00000 0x080000>;
no-map;
};
tz@87e80000 {
reg = <0x87e80000 0x180000>;
no-map;
};
};
soc {
mdio@90000 {
status = "okay";
/delete-node/ ethernet-phy@2;
/delete-node/ ethernet-phy@3;
/delete-node/ ethernet-phy@4;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
serial@78af000 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x18>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "gl-b1300:green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
mesh {
label = "gl-b1300:green:mesh";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "gl-b1300:green:wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&spi_0 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 0>;
mx25l25635f@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
DDRPARAMS@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
APPSBLENV@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
APPSBL@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
ART@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
firmware@180000 {
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
};
pinmux_cs {
function = "gpio";
pins = "gpio54";
};
pinconf {
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

View File

@ -44,15 +44,14 @@ endef
TARGET_DEVICES += avm_fritzbox-4040
define Device/glinet_gl-b1300
$(call Device/FitImage)
DEVICE_TITLE := GL.iNet GL-B1300
BOARD_NAME := gl-b1300
DEVICE_DTS := qcom-ipq4019-gl-b1300
KERNEL_INSTALL := 1
DEVICE_DTS := qcom-ipq4029-gl-b1300
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
$(call Device/FitImage)
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300
endef
TARGET_DEVICES += glinet_gl-b1300

View File

@ -18,7 +18,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-fritz4040.dtb \
+ qcom-ipq4019-gl-b1300.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \