hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 

Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
lede-17.01
Gabor Juhos 2011-12-28 08:43:43 +00:00
parent f50b02b559
commit 244c322d25
11 changed files with 184 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/base-files/etc/diag.sh
View File

@ -36,6 +36,9 @@ get_status_led() {
esr-9753) esr-9753)
status_led="esr-9753:orange:power" status_led="esr-9753:orange:power"
;; ;;
f5d8235-v1)
set_usb_led "f5d8235-v1:green:usb"
;;
fonera20n) fonera20n)
status_led="fonera20n:green:power" status_led="fonera20n:green:power"
;; ;;

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@ -41,6 +41,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "devconf" 0 272 rt2x00_eeprom_extract "devconf" 0 272
;; ;;
f5d8235-v1 | \
f5d8235-v2) f5d8235-v2)
rt2x00_eeprom_extract "u-boot" 262144 272 rt2x00_eeprom_extract "u-boot" 262144 272
;; ;;

2
target/linux/ramips/base-files/etc/uci-defaults/network
View File

@ -35,6 +35,7 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0" ucidef_set_interface_lan "eth0"
;; ;;
f5d8235-v1 | \
rt-n15) rt-n15)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366s" "1" "1" ucidef_add_switch "rtl8366s" "1" "1"
@ -67,6 +68,7 @@ ramips_setup_macs()
argus-atp52b | \ argus-atp52b | \
b2c | \ b2c | \
f5d8235-v1 | \
nw718 | \ nw718 | \
rt-n15 | \ rt-n15 | \
wl-351) wl-351)

3
target/linux/ramips/base-files/lib/ramips.sh
View File

@ -65,6 +65,9 @@ ramips_board_name() {
*"ESR-9753") *"ESR-9753")
name="esr-9753" name="esr-9753"
;; ;;
*"F5D8235 v1")
name="f5d8235-v1"
;;
*"F5D8235 v2") *"F5D8235 v2")
name="f5d8235-v2" name="f5d8235-v2"
;; ;;

1
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
View File

@ -14,6 +14,7 @@
enum ramips_mach_type { enum ramips_mach_type {
RAMIPS_MACH_GENERIC, RAMIPS_MACH_GENERIC,
/* RT2880 based machines */ /* RT2880 based machines */
RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */

4
target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
View File

@ -2,6 +2,10 @@ if RALINK_RT288X
menu "Ralink RT288x machine selection" menu "Ralink RT288x machine selection"
config RT288X_MACH_F5D8235_V1
bool "Belkin F5D8235 V1 board support"
select RALINK_DEV_GPIO_LEDS
config RT288X_MACH_RT_N15 config RT288X_MACH_RT_N15
bool "Asus RT-N15 board support" bool "Asus RT-N15 board support"
select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_BUTTONS

1
target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
View File

@ -13,6 +13,7 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o

142
target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c Normal file
View File

@ -0,0 +1,142 @@
/*
* Belkin F5D825 V1 board support
*
* Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt288x.h>
#include <asm/mach-ralink/rt288x_regs.h>
#include "devices.h"
#include <linux/rtl8366.h>
#include <linux/ethtool.h>
#include <asm/mach-ralink/ramips_eth_platform.h>
#define F5D8235_GPIO_RTL8366_SCK 2
#define F5D8235_GPIO_RTL8366_SDA 1
#define F5D8235_GPIO_LED_USB_BLUE 7
#define F5D8235_GPIO_LED_USB_ORANGE 8
#define F5D8235_GPIO_BUTTON_WPS 0
#define F5D8235_GPIO_BUTTON_RESET 9
#define F5D8235_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition f5d8235_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x050000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel and rootfs",
.offset = 0x050000,
.size = 0x790000,
}, {
.name = "rootfs",
.offset = 0x1D0000,
.size = 0x610000,
}, {
.name = "nvram",
.offset = 0x7E0000,
.size = 0x010000,
}, {
.name = "factory",
.offset = 0x7F0000,
.size = 0x010000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data f5d8235_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(f5d8235_partitions),
.parts = f5d8235_partitions,
#endif
};
static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
.gpio_sda = F5D8235_GPIO_RTL8366_SDA,
.gpio_sck = F5D8235_GPIO_RTL8366_SCK,
};
static struct platform_device f5d8235_rtl8366s_device = {
.name = RTL8366S_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &f5d8235_rtl8366s_data,
}
};
static struct gpio_led f5d8235_leds_gpio[] __initdata = {
{
.name = "f5d8234-v1:blue:storage",
.gpio = F5D8235_GPIO_LED_USB_BLUE,
.active_low = 1,
},{
.name = "f5d8234-v1:orange:storage",
.gpio = F5D8235_GPIO_LED_USB_ORANGE,
.active_low = 1,
}
};
static struct gpio_button f5d8235_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = F5D8235_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = F5D8235_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static void __init f5d8235_init(void)
{
rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
rt288x_register_flash(0, &f5d8235_flash_data);
rt288x_register_wifi();
rt288x_register_wdt();
ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
f5d8235_leds_gpio);
ramips_register_gpio_buttons(-1, F5D8235_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(f5d8235_gpio_buttons),
f5d8235_gpio_buttons);
platform_device_register(&f5d8235_rtl8366s_device);
rt288x_eth_data.speed = SPEED_1000;
rt288x_eth_data.duplex = DUPLEX_FULL;
rt288x_eth_data.tx_fc = 1;
rt288x_eth_data.rx_fc = 1;
rt288x_register_ethernet();
}
MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
"Belkin F5D8235 v1", f5d8235_init);

9
target/linux/ramips/image/Makefile
View File

@ -257,6 +257,10 @@ define Image/Build/Profile/F5D8235V2
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2) $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
endef endef
define Image/Build/Template/F5D8235V1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
endef
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware) mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
@ -265,7 +269,6 @@ define Image/Build/Profile/WR5123GN
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960) $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
endef endef
ifeq ($(CONFIG_RALINK_RT305X),y) ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
@ -290,6 +293,9 @@ define Image/Build/Profile/Default
endef endef
endif endif
define Image/Build/Profile/F5D8235V1
$(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
endef
define Image/Build/Profile/RTN15 define Image/Build/Profile/RTN15
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15) $(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
@ -302,6 +308,7 @@ endef
ifeq ($(CONFIG_RALINK_RT288X),y) ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default define Image/Build/Profile/Default
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1)) $(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1)) $(call Image/Build/Profile/WLITX4AG300N,$(1))
endef endef

1
target/linux/ramips/rt288x/config-2.6.39
View File

@ -92,6 +92,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set # CONFIG_RALINK_RT305X is not set
CONFIG_RAMIPS_WDT=y CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y CONFIG_RT288X_MACH_RT_N15=y
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y CONFIG_RT288X_MACH_WZR_AGL300NH=y

18
target/linux/ramips/rt288x/profiles/belkin.mk Normal file
View File

@ -0,0 +1,18 @@
#
# Copyright (C) 2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/F5D8235V1
NAME:=Belkin F5D8235 V1
PACKAGES:=kmod-switch-rtl8366s kmod-swconfig swconfig
endef
define Profile/F5D8235_V1/Description
Package set for Belkin F5D8235 V1
endef
$(eval $(call Profile,F5D8235V1))