mirror of https://github.com/hak5/openwrt.git
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 46342lede-17.01
John Crispin
parent
d0d3ca2a1b
commit
1eccdb4fd4
|
|
@ -78,6 +78,9 @@ get_status_led() {
|
|||
dlan-pro-500-wp)
|
||||
status_led="devolo:green:wlan-2g"
|
||||
;;
|
||||
dlan-pro-1200-ac)
|
||||
status_led="devolo:status:wlan"
|
||||
;;
|
||||
dragino2)
|
||||
status_led="dragino2:red:system"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -47,6 +47,9 @@ board=$(ar71xx_board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
dlan-pro-1200-ac)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
;;
|
||||
mc-mac1200r)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
|
||||
|
|
|
|||
|
|
@ -180,6 +180,12 @@ dlan-pro-500-wp)
|
|||
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
|
||||
;;
|
||||
|
||||
dlan-pro-1200-ac)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio"
|
||||
ucidef_set_led_trigger_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
|
||||
ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
|
||||
;;
|
||||
|
||||
gl-inet)
|
||||
ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
|
||||
|
|
|
|||
|
|
@ -305,6 +305,12 @@ dlan-pro-500-wp)
|
|||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
|
||||
dlan-pro-1200-ac)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
ucidef_add_switch "switch0" "1" "0"
|
||||
ucidef_add_switch_vlan "switch0" "0" "0 2 3 4"
|
||||
;;
|
||||
|
||||
all0305 |\
|
||||
aw-nr580 |\
|
||||
bullet-m |\
|
||||
|
|
|
|||
|
|
@ -426,6 +426,9 @@ ar71xx_board_detect() {
|
|||
*"dLAN pro 500 Wireless+")
|
||||
name="dlan-pro-500-wp"
|
||||
;;
|
||||
*"dLAN pro 1200+ WiFi ac")
|
||||
name="dlan-pro-1200-ac"
|
||||
;;
|
||||
*"Dragino v2")
|
||||
name="dragino2"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -209,6 +209,7 @@ platform_check_image() {
|
|||
dir-825-c1 | \
|
||||
dir-835-a1 | \
|
||||
dlan-pro-500-wp | \
|
||||
dlan-pro-1200-ac | \
|
||||
dragino2 | \
|
||||
epg5000 | \
|
||||
esr1750 | \
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_DIR_615_C1=y
|
|||
CONFIG_ATH79_MACH_DIR_615_I1=y
|
||||
CONFIG_ATH79_MACH_DIR_825_B1=y
|
||||
CONFIG_ATH79_MACH_DIR_825_C1=y
|
||||
CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
|
||||
CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
|
||||
CONFIG_ATH79_MACH_DRAGINO2=y
|
||||
CONFIG_ATH79_MACH_EAP300V2=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
* devolo dLAN pro 500 Wireless+ support
|
||||
*
|
||||
* Copyright (c) 2013-2015 devolo AG
|
||||
* Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE 13
|
||||
#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE 21
|
||||
#define DLAN_PRO_1200_AC_GPIO_LED_WLAN 12
|
||||
#define DLAN_PRO_1200_AC_GPIO_LED_DLAN 14
|
||||
#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR 15
|
||||
|
||||
#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN 20
|
||||
#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN 22
|
||||
#define DLAN_PRO_1200_AC_GPIO_BTN_RESET 4
|
||||
#define DLAN_PRO_1200_AC_GPIO_DLAN_IND 17
|
||||
#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND 16
|
||||
|
||||
#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define DLAN_PRO_1200_AC_ART_ADDRESS 0x1fff0000
|
||||
#define DLAN_PRO_1200_AC_CALDATA_OFFSET 0x1000
|
||||
#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET 0x1002
|
||||
#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "devolo:status:wlan",
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "devolo:status:dlan",
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "devolo:error:dlan",
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR,
|
||||
.active_low = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "dLAN button",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_0,
|
||||
.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_BTN_DLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "WLAN button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_BTN_WLAN,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DLAN_PRO_1200_AC_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = false,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = {
|
||||
.mode = 0,
|
||||
.txclk_delay_en = 0,
|
||||
.rxclk_delay_en = 0,
|
||||
.txclk_delay_sel = 0,
|
||||
.rxclk_delay_sel = 0,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = {
|
||||
.pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg,
|
||||
.pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &dlan_pro_1200_ac_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init dlan_pro_1200_ac_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS);
|
||||
u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET;
|
||||
u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET;
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio),
|
||||
dlan_pro_1200_ac_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys),
|
||||
dlan_pro_1200_ac_gpio_keys);
|
||||
|
||||
/* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */
|
||||
gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE,
|
||||
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
||||
"dLAN power");
|
||||
|
||||
/* WLAN power is turned on initially to allow the PCI bus scan to succeed */
|
||||
gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"WLAN power");
|
||||
|
||||
ath79_register_wmac(cal, wifi_mac);
|
||||
ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
|
||||
|
||||
mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info,
|
||||
ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info));
|
||||
|
||||
/* GMAC0 is connected to an AR8337 */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x02000000;
|
||||
ath79_register_eth(0);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac",
|
||||
dlan_pro_1200_ac_setup);
|
||||
|
|
@ -17,3 +17,17 @@ define Profile/dLAN_pro_500_wp/Description
|
|||
Package set optimized for the devolo dLAN pro 500 Wireless+.
|
||||
endef
|
||||
$(eval $(call Profile,dLAN_pro_500_wp))
|
||||
|
||||
define Profile/dLAN_pro_1200_ac
|
||||
NAME:=devolo dLAN pro 1200+ WiFi ac
|
||||
PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \
|
||||
open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-plchost \
|
||||
open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \
|
||||
ebtables hostapd-utils wifitoggle wpad ip-full kmod-ath10k kmod-leds-gpio \
|
||||
kmod-ledtrig-gpio
|
||||
endef
|
||||
|
||||
define Profile/dLAN_pro_1200_ac/Description
|
||||
Package set optimized for the devolo dLAN pro 1200+ WiFi ac.
|
||||
endef
|
||||
$(eval $(call Profile,dLAN_pro_1200_ac))
|
||||
|
|
|
|||
|
|
@ -1186,6 +1186,7 @@ eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),1
|
|||
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
||||
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
|
||||
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),6528k(rootfs),7680k@0x70000(firmware),64k(art)ro
|
||||
dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),14720k(rootfs),15872k@0x70000(firmware),64k(art)ro
|
||||
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
|
||||
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
|
||||
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
||||
|
|
@ -2081,6 +2082,7 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,tty
|
|||
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
|
||||
|
||||
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage))
|
||||
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) root=31:5 mem=128M,KRuImage))
|
||||
|
||||
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
|
||||
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -16,22 +16,194 @@
|
||||
@@ -16,22 +16,195 @@
|
||||
|
||||
enum ath79_mach_type {
|
||||
ATH79_MACH_GENERIC = 0,
|
||||
|
|
@ -40,6 +40,7 @@
|
|||
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
|
||||
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
|
||||
+ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */
|
||||
+ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/
|
||||
+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
|
||||
+ ATH79_MACH_ESR900, /* EnGenius ESR900 */
|
||||
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
|
||||
|
|
@ -268,7 +269,7 @@
|
|||
config ATH79_MACH_AP121
|
||||
bool "Atheros AP121 reference board"
|
||||
select SOC_AR933X
|
||||
@@ -11,62 +75,1018 @@ config ATH79_MACH_AP121
|
||||
@@ -11,62 +75,1031 @@ config ATH79_MACH_AP121
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
|
@ -627,6 +628,19 @@
|
|||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+
|
||||
+config ATH79_MACH_DLAN_PRO_1200_AC
|
||||
+ bool "devolo dLAN pro 1200+ WiFi ac support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_AP9X_PCI if PCI
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_SPI
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_NFC
|
||||
+ select ATH79_DEV_USB
|
||||
+
|
||||
+config ATH79_MACH_DRAGINO2
|
||||
+ bool "DRAGINO V2 support"
|
||||
+ select SOC_AR933X
|
||||
|
|
@ -1315,7 +1329,7 @@
|
|||
|
||||
config ATH79_MACH_UBNT_XM
|
||||
bool "Ubiquiti Networks XM/UniFi boards"
|
||||
@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM
|
||||
@@ -83,6 +1116,97 @@ config ATH79_MACH_UBNT_XM
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Ubiquiti Networks XM (rev 1.0) board.
|
||||
|
||||
|
|
@ -1413,7 +1427,7 @@
|
|||
endmenu
|
||||
|
||||
config SOC_AR71XX
|
||||
@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA
|
||||
@@ -124,7 +1248,10 @@ config ATH79_DEV_DSA
|
||||
config ATH79_DEV_ETH
|
||||
def_bool n
|
||||
|
||||
|
|
@ -1425,7 +1439,7 @@
|
|||
def_bool n
|
||||
|
||||
config ATH79_DEV_GPIO_BUTTONS
|
||||
@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP
|
||||
@@ -154,6 +1281,11 @@ config ATH79_PCI_ATH9K_FIXUP
|
||||
def_bool n
|
||||
|
||||
config ATH79_ROUTERBOOT
|
||||
|
|
@ -1439,7 +1453,7 @@
|
|||
endif
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -38,9 +38,123 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
|
||||
@@ -38,9 +38,124 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
|
||||
#
|
||||
# Machines
|
||||
#
|
||||
|
|
@ -1461,6 +1475,7 @@
|
|||
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
|
||||
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
|
||||
|
|
|
|||
Loading…
Reference in New Issue