mirror of https://github.com/hak5/openwrt.git
ath79: fix support for Buffalo WZR-HP-G450H and split to dts/dtsi
There are many parts that are incorrect or missing in the current code for Buffalo WZR-HP-G450H in ath79, so its support is broken. I fixed that issues and split to dts/dtsi files to add support for Buffalo BHR-4GRV. And WZR-450HP has the same hardware as WZR-HP-G450H, so I change the device name to "WZR-HP-G450H/WZR-450HP". Specification: - Atheros AR7242 - 64 MB of RAM - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 3T3R 2.4 GHz wifi - SoC internal - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 5x keys - 1x USB 2.0 Type-A - UART header on PCB - JP1: Vcc, GND, TX, RX from reset button side Flash instruction using factory image: 1. Boot the WZR-HP-G450H (or WZR-450HP) normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html" with user "bufpy" and password "otdpopy" 3. Select the OpenWrt factory image and click "OK" button to perform firmware update 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>openwrt-19.07
INAGAKI Hiroshi
Mathias Kresin
parent
b6e6785c88
commit
1df1ea4d7e
|
|
@ -120,6 +120,9 @@ case "$FIRMWARE" in
|
|||
tplink,tl-wr941-v4)
|
||||
ath9k_eeprom_extract "art" 4096 3768
|
||||
;;
|
||||
buffalo,wzr-hp-g450h)
|
||||
ath9k_eeprom_extract "ART" 4096 1088
|
||||
;;
|
||||
ocedo,raccoon|\
|
||||
tplink,tl-wdr3600|\
|
||||
tplink,tl-wdr4300|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,174 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar7242.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &diag;
|
||||
led-failsafe = &diag;
|
||||
led-upgrade = &diag;
|
||||
};
|
||||
|
||||
extosc: ref {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
keys: keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
usb {
|
||||
label = "usb";
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sec_vpn: sec_vpn {
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
diag: diag {
|
||||
label = "buffalo:red:diag";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "buffalo:green:usb";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_usb_power {
|
||||
gpio-export,name = "buffalo:usb-power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
devices = <&flash0 &flash1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x40000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
reg = <0x40000 0x10000>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
|
||||
ART: partition@50000 {
|
||||
reg = <0x50000 0x10000>;
|
||||
label = "ART";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
reg = <0x60000 0x1f80000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
reg = <0x1fe0000 0x20000>;
|
||||
label = "user_property";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
cs-gpios = <0>, <0>;
|
||||
num-cs = <2>;
|
||||
|
||||
flash0: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
};
|
||||
|
||||
flash1: flash@1 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <0x1>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&ART 0x1002>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&pll {
|
||||
clocks = <&extosc>;
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -4,111 +4,74 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar7242.dtsi"
|
||||
#include "ar7242_buffalo_wzr-bhr.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
|
||||
model = "Buffalo WZR-HP-G450H";
|
||||
model = "Buffalo WZR-HP-G450H/WZR-450HP";
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
ath9k-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
usb {
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
led_movie_engine {
|
||||
label = "buffalo:blue:movie_engine";
|
||||
gpios = <&ath9k 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
reset {
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
router {
|
||||
label = "buffalo:green:router";
|
||||
gpios = <&ath9k 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
wireless {
|
||||
label = "buffalo:green:wireless";
|
||||
gpios = <&ath9k 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&keys {
|
||||
movie_engine {
|
||||
linux,code = <KEY_RESTART>;
|
||||
label = "movie_engine";
|
||||
linux,code = <BTN_6>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
aoss {
|
||||
label = "aoss";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
router_off {
|
||||
label = "router_off";
|
||||
linux,code = <BTN_5>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
security {
|
||||
&sec_vpn {
|
||||
label = "buffalo:orange:security";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
diag {
|
||||
label = "buffalo:red:diag";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_usb_power {
|
||||
gpio-export,name = "wzr-hp-g450h:usb-power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
phy-mask = <0x1>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
pll-data = <0x62000000 0 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
ath9k: wifi@0,0 {
|
||||
compatible = "pci168c,0030";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mtd-mac-address = <&ART 0x1002>;
|
||||
qca,no-eeprom;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -84,9 +84,13 @@ TARGET_DEVICES += buffalo_wzr-hp-ag300h
|
|||
|
||||
define Device/buffalo_wzr-hp-g450h
|
||||
ATH_SOC := ar7242
|
||||
DEVICE_TITLE := Buffalo WZR-HP-G450H
|
||||
DEVICE_TITLE := Buffalo WZR-HP-G450H/WZR-450HP
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
IMAGE_SIZE := 32256k
|
||||
IMAGES += factory.bin tftp.bin
|
||||
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | buffalo-tag WZR-HP-G450H
|
||||
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
||||
SUPPORTED_DEVICES += wzr-hp-g450h
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
||||
|
|
|
|||
Loading…
Reference in New Issue