mirror of https://github.com/hak5/openwrt.git
Gabor Juhos
parent
aa48f1326b
commit
19be4923e0
|
|
@ -1,58 +0,0 @@
|
||||||
--- a/arch/mips/Kconfig
|
|
||||||
+++ b/arch/mips/Kconfig
|
|
||||||
@@ -20,6 +20,21 @@ choice
|
|
||||||
prompt "System type"
|
|
||||||
default SGI_IP22
|
|
||||||
|
|
||||||
+config ADM5120
|
|
||||||
+ bool "Infineon/ADMtek ADM5120 SoC based machines"
|
|
||||||
+ select CEVT_R4K
|
|
||||||
+ select CSRC_R4K
|
|
||||||
+ select SYS_HAS_CPU_MIPS32_R1
|
|
||||||
+ select SYS_HAS_EARLY_PRINTK
|
|
||||||
+ select DMA_NONCOHERENT
|
|
||||||
+ select IRQ_CPU
|
|
||||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
||||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
|
||||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
||||||
+ select ARCH_REQUIRE_GPIOLIB
|
|
||||||
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
|
|
||||||
+ select MIPS_MACHINE
|
|
||||||
+
|
|
||||||
config MACH_ALCHEMY
|
|
||||||
bool "Alchemy processor based machines"
|
|
||||||
|
|
||||||
@@ -673,6 +688,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
|
|
||||||
|
|
||||||
endchoice
|
|
||||||
|
|
||||||
+source "arch/mips/adm5120/Kconfig"
|
|
||||||
source "arch/mips/alchemy/Kconfig"
|
|
||||||
source "arch/mips/basler/excite/Kconfig"
|
|
||||||
source "arch/mips/bcm63xx/Kconfig"
|
|
||||||
--- a/arch/mips/Makefile
|
|
||||||
+++ b/arch/mips/Makefile
|
|
||||||
@@ -193,6 +193,23 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre
|
|
||||||
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
|
|
||||||
|
|
||||||
#
|
|
||||||
+# Infineon/ADMtek ADM5120
|
|
||||||
+#
|
|
||||||
+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
|
|
||||||
+core-$(CONFIG_ADM5120) += arch/mips/adm5120/common/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_COMPEX) += arch/mips/adm5120/compex/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_EDIMAX) += arch/mips/adm5120/edimax/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_GENERIC) += arch/mips/adm5120/generic/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_INFINEON) += arch/mips/adm5120/infineon/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_MIKROTIK) += arch/mips/adm5120/mikrotik/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_MOTOROLA) += arch/mips/adm5120/motorola/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_OSBRIDGE) += arch/mips/adm5120/osbridge/
|
|
||||||
+core-$(CONFIG_ADM5120_OEM_ZYXEL) += arch/mips/adm5120/zyxel/
|
|
||||||
+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
|
|
||||||
+load-$(CONFIG_ADM5120) += 0xffffffff80001000
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
# Common Alchemy Au1x00 stuff
|
|
||||||
#
|
|
||||||
core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/
|
|
||||||
|
|
@ -1,21 +0,0 @@
|
||||||
--- a/drivers/mtd/maps/Kconfig
|
|
||||||
+++ b/drivers/mtd/maps/Kconfig
|
|
||||||
@@ -557,4 +557,8 @@ config MTD_VMU
|
|
||||||
To build this as a module select M here, the module will be called
|
|
||||||
vmu-flash.
|
|
||||||
|
|
||||||
+config MTD_ADM5120
|
|
||||||
+ tristate "Map driver for ADM5120 based boards"
|
|
||||||
+ depends on ADM5120
|
|
||||||
+
|
|
||||||
endmenu
|
|
||||||
--- a/drivers/mtd/maps/Makefile
|
|
||||||
+++ b/drivers/mtd/maps/Makefile
|
|
||||||
@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
|
|
||||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
|
||||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
|
||||||
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
|
|
||||||
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
|
|
||||||
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
|
|
||||||
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
|
|
||||||
obj-$(CONFIG_MTD_IMPA7) += impa7.o
|
|
||||||
|
|
@ -1,23 +0,0 @@
|
||||||
--- a/drivers/net/Kconfig
|
|
||||||
+++ b/drivers/net/Kconfig
|
|
||||||
@@ -479,6 +479,10 @@ config MIPS_AU1X00_ENET
|
|
||||||
If you have an Alchemy Semi AU1X00 based system
|
|
||||||
say Y. Otherwise, say N.
|
|
||||||
|
|
||||||
+config ADM5120_ENET
|
|
||||||
+ tristate "ADM5120 Ethernet switch support"
|
|
||||||
+ depends on ADM5120
|
|
||||||
+
|
|
||||||
config SGI_IOC3_ETH
|
|
||||||
bool "SGI IOC3 Ethernet"
|
|
||||||
depends on PCI && SGI_IP27
|
|
||||||
--- a/drivers/net/Makefile
|
|
||||||
+++ b/drivers/net/Makefile
|
|
||||||
@@ -207,6 +207,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
|
|
||||||
# This is also a 82596 and should probably be merged
|
|
||||||
obj-$(CONFIG_LP486E) += lp486e.o
|
|
||||||
|
|
||||||
+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
|
|
||||||
obj-$(CONFIG_ETH16I) += eth16i.o
|
|
||||||
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
|
|
||||||
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
|
|
||||||
|
|
@ -1,33 +0,0 @@
|
||||||
--- a/drivers/usb/Makefile
|
|
||||||
+++ b/drivers/usb/Makefile
|
|
||||||
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/
|
|
||||||
obj-$(CONFIG_USB_MON) += mon/
|
|
||||||
|
|
||||||
obj-$(CONFIG_PCI) += host/
|
|
||||||
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
|
|
||||||
obj-$(CONFIG_USB_EHCI_HCD) += host/
|
|
||||||
obj-$(CONFIG_USB_ISP116X_HCD) += host/
|
|
||||||
obj-$(CONFIG_USB_OHCI_HCD) += host/
|
|
||||||
--- a/drivers/usb/host/Kconfig
|
|
||||||
+++ b/drivers/usb/host/Kconfig
|
|
||||||
@@ -4,6 +4,10 @@
|
|
||||||
comment "USB Host Controller Drivers"
|
|
||||||
depends on USB
|
|
||||||
|
|
||||||
+config USB_ADM5120_HCD
|
|
||||||
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
|
|
||||||
+ depends on USB && ADM5120 && EXPERIMENTAL
|
|
||||||
+
|
|
||||||
config USB_C67X00_HCD
|
|
||||||
tristate "Cypress C67x00 HCD support"
|
|
||||||
depends on USB
|
|
||||||
--- a/drivers/usb/host/Makefile
|
|
||||||
+++ b/drivers/usb/host/Makefile
|
|
||||||
@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/
|
|
||||||
|
|
||||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
|
||||||
|
|
||||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
|
||||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
|
||||||
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
|
||||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
|
||||||
|
|
@ -1,22 +0,0 @@
|
||||||
--- a/arch/mips/pci/Makefile
|
|
||||||
+++ b/arch/mips/pci/Makefile
|
|
||||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
|
||||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
|
||||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
|
||||||
+obj-$(CONFIG_ADM5120) += pci-adm5120.o
|
|
||||||
|
|
||||||
ifdef CONFIG_PCI_MSI
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
|
||||||
--- a/include/linux/pci_ids.h
|
|
||||||
+++ b/include/linux/pci_ids.h
|
|
||||||
@@ -1752,6 +1752,9 @@
|
|
||||||
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
|
|
||||||
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
|
|
||||||
|
|
||||||
+#define PCI_VENDOR_ID_ADMTEK 0x1317
|
|
||||||
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
|
|
||||||
+
|
|
||||||
#define PCI_VENDOR_ID_SIIG 0x131f
|
|
||||||
#define PCI_SUBVENDOR_ID_SIIG 0x131f
|
|
||||||
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
|
|
||||||
|
|
@ -1,22 +0,0 @@
|
||||||
--- a/drivers/leds/Kconfig
|
|
||||||
+++ b/drivers/leds/Kconfig
|
|
||||||
@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV
|
|
||||||
This allows LEDs to be controlled by the presence/activity of
|
|
||||||
an USB device. If unsure, say N.
|
|
||||||
|
|
||||||
+config LEDS_TRIGGER_ADM5120_SWITCH
|
|
||||||
+ tristate "LED ADM5120 Switch Port Status Trigger"
|
|
||||||
+ depends on LEDS_TRIGGERS && ADM5120
|
|
||||||
+ help
|
|
||||||
+ This allows LEDs to be controlled by the port states of
|
|
||||||
+ the ADM5120 built-in Ethernet Switch
|
|
||||||
+ If unsure, say N.
|
|
||||||
+
|
|
||||||
endif # NEW_LEDS
|
|
||||||
--- a/drivers/leds/Makefile
|
|
||||||
+++ b/drivers/leds/Makefile
|
|
||||||
@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) +=
|
|
||||||
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
|
|
||||||
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
|
|
||||||
obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o
|
|
||||||
+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
|
|
||||||
|
|
@ -1,84 +0,0 @@
|
||||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
@@ -52,6 +52,12 @@
|
|
||||||
#define SST49LF008A 0x005a
|
|
||||||
#define AT49BV6416 0x00d6
|
|
||||||
|
|
||||||
+/* Macronix */
|
|
||||||
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
|
|
||||||
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
|
|
||||||
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
|
|
||||||
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
|
|
||||||
+
|
|
||||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
|
||||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
|
||||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
|
||||||
@@ -282,6 +288,41 @@ static void fixup_s29gl032n_sectors(stru
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
|
||||||
+/*
|
|
||||||
+ * Some Macronix chips has no/bad bootblock information in the CFI table
|
|
||||||
+ */
|
|
||||||
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
|
|
||||||
+{
|
|
||||||
+ struct map_info *map = mtd->priv;
|
|
||||||
+ struct cfi_private *cfi = map->fldrv_priv;
|
|
||||||
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
|
|
||||||
+ __u8 t;
|
|
||||||
+
|
|
||||||
+ switch (cfi->id) {
|
|
||||||
+ /* TODO: put affected chip ids here */
|
|
||||||
+ case MX29LV160B:
|
|
||||||
+ case MX29LV320B:
|
|
||||||
+ t = 2; /* Bottom boot */
|
|
||||||
+ break;
|
|
||||||
+ case MX29LV160T:
|
|
||||||
+ case MX29LV320T:
|
|
||||||
+ t = 3; /* Top boot */
|
|
||||||
+ break;
|
|
||||||
+ default:
|
|
||||||
+ return;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ if (extp->TopBottom == t)
|
|
||||||
+ /* boot location detected by the CFI layer is correct */
|
|
||||||
+ return;
|
|
||||||
+
|
|
||||||
+ extp->TopBottom = t;
|
|
||||||
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
|
|
||||||
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
|
|
||||||
+}
|
|
||||||
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
|
|
||||||
+
|
|
||||||
static struct cfi_fixup cfi_fixup_table[] = {
|
|
||||||
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
|
|
||||||
#ifdef AMD_BOOTLOC_BUG
|
|
||||||
@@ -318,6 +359,9 @@ static struct cfi_fixup fixup_table[] =
|
|
||||||
*/
|
|
||||||
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
|
|
||||||
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
|
|
||||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
|
||||||
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
|
|
||||||
+#endif
|
|
||||||
{ 0, 0, NULL, NULL }
|
|
||||||
};
|
|
||||||
|
|
||||||
--- a/drivers/mtd/chips/Kconfig
|
|
||||||
+++ b/drivers/mtd/chips/Kconfig
|
|
||||||
@@ -198,6 +198,14 @@ config MTD_CFI_AMDSTD
|
|
||||||
provides support for one of those command sets, used on chips
|
|
||||||
including the AMD Am29LV320.
|
|
||||||
|
|
||||||
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
|
||||||
+ bool "Fix boot-block location for Macronix flash chips"
|
|
||||||
+ depends on MTD_CFI_AMDSTD
|
|
||||||
+ help
|
|
||||||
+ Some Macronix flash chips have no/wrong boot-block location in the
|
|
||||||
+ CFI table, and the driver may detect the type incorrectly. Select
|
|
||||||
+ this if your board has such chip.
|
|
||||||
+
|
|
||||||
config MTD_CFI_STAA
|
|
||||||
tristate "Support for ST (Advanced Architecture) flash chips"
|
|
||||||
depends on MTD_GEN_PROBE
|
|
||||||
|
|
@ -1,68 +0,0 @@
|
||||||
--- a/drivers/mtd/chips/jedec_probe.c
|
|
||||||
+++ b/drivers/mtd/chips/jedec_probe.c
|
|
||||||
@@ -133,6 +133,10 @@
|
|
||||||
#define UPD29F064115 0x221C
|
|
||||||
|
|
||||||
/* PMC */
|
|
||||||
+#define PM39LV512 0x001B
|
|
||||||
+#define PM39LV010 0x001C
|
|
||||||
+#define PM39LV020 0x003D
|
|
||||||
+#define PM39LV040 0x003E
|
|
||||||
#define PM49FL002 0x006D
|
|
||||||
#define PM49FL004 0x006E
|
|
||||||
#define PM49FL008 0x006A
|
|
||||||
@@ -1275,6 +1279,54 @@ static const struct amd_flash_info jedec
|
|
||||||
ERASEINFO(0x02000,2),
|
|
||||||
ERASEINFO(0x04000,1),
|
|
||||||
}
|
|
||||||
+ }, {
|
|
||||||
+ .mfr_id = MANUFACTURER_PMC,
|
|
||||||
+ .dev_id = PM39LV512,
|
|
||||||
+ .name = "PMC Pm39LV512",
|
|
||||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
|
||||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
|
||||||
+ .dev_size = SIZE_64KiB,
|
|
||||||
+ .cmd_set = P_ID_AMD_STD,
|
|
||||||
+ .nr_regions = 1,
|
|
||||||
+ .regions = {
|
|
||||||
+ ERASEINFO(0x01000,16),
|
|
||||||
+ }
|
|
||||||
+ }, {
|
|
||||||
+ .mfr_id = MANUFACTURER_PMC,
|
|
||||||
+ .dev_id = PM39LV010,
|
|
||||||
+ .name = "PMC Pm39LV010",
|
|
||||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
|
||||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
|
||||||
+ .dev_size = SIZE_128KiB,
|
|
||||||
+ .cmd_set = P_ID_AMD_STD,
|
|
||||||
+ .nr_regions = 1,
|
|
||||||
+ .regions = {
|
|
||||||
+ ERASEINFO(0x01000,32),
|
|
||||||
+ }
|
|
||||||
+ }, {
|
|
||||||
+ .mfr_id = MANUFACTURER_PMC,
|
|
||||||
+ .dev_id = PM39LV020,
|
|
||||||
+ .name = "PMC Pm39LV020",
|
|
||||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
|
||||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
|
||||||
+ .dev_size = SIZE_256KiB,
|
|
||||||
+ .cmd_set = P_ID_AMD_STD,
|
|
||||||
+ .nr_regions = 1,
|
|
||||||
+ .regions = {
|
|
||||||
+ ERASEINFO(0x01000,64),
|
|
||||||
+ }
|
|
||||||
+ }, {
|
|
||||||
+ .mfr_id = MANUFACTURER_PMC,
|
|
||||||
+ .dev_id = PM39LV040,
|
|
||||||
+ .name = "PMC Pm39LV040",
|
|
||||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
|
||||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
|
||||||
+ .dev_size = SIZE_512KiB,
|
|
||||||
+ .cmd_set = P_ID_AMD_STD,
|
|
||||||
+ .nr_regions = 1,
|
|
||||||
+ .regions = {
|
|
||||||
+ ERASEINFO(0x01000,128),
|
|
||||||
+ }
|
|
||||||
}, {
|
|
||||||
.mfr_id = MANUFACTURER_PMC,
|
|
||||||
.dev_id = PM49FL002,
|
|
||||||
|
|
@ -1,24 +0,0 @@
|
||||||
--- a/drivers/mtd/Kconfig
|
|
||||||
+++ b/drivers/mtd/Kconfig
|
|
||||||
@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
|
|
||||||
depends on MTD_PARTITIONS
|
|
||||||
default y
|
|
||||||
|
|
||||||
+config MTD_TRXSPLIT
|
|
||||||
+ bool "Automatically find and split TRX partitions"
|
|
||||||
+ depends on MTD_PARTITIONS
|
|
||||||
+ default n
|
|
||||||
+
|
|
||||||
config MTD_REDBOOT_PARTS
|
|
||||||
tristate "RedBoot partition table parsing"
|
|
||||||
depends on MTD_PARTITIONS
|
|
||||||
--- a/drivers/mtd/Makefile
|
|
||||||
+++ b/drivers/mtd/Makefile
|
|
||||||
@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtdbdi.
|
|
||||||
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
|
|
||||||
|
|
||||||
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
|
||||||
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
|
|
||||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
|
||||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
|
||||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
|
||||||
|
|
@ -1,28 +0,0 @@
|
||||||
--- a/drivers/ata/Makefile
|
|
||||||
+++ b/drivers/ata/Makefile
|
|
||||||
@@ -77,6 +77,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat
|
|
||||||
obj-$(CONFIG_PATA_AT91) += pata_at91.o
|
|
||||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
|
||||||
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
|
|
||||||
+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
|
|
||||||
# Should be last but two libata driver
|
|
||||||
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
|
|
||||||
# Should be last but one libata driver
|
|
||||||
--- a/drivers/ata/Kconfig
|
|
||||||
+++ b/drivers/ata/Kconfig
|
|
||||||
@@ -597,6 +597,15 @@ config PATA_RADISYS
|
|
||||||
|
|
||||||
If unsure, say N.
|
|
||||||
|
|
||||||
+config PATA_RB153_CF
|
|
||||||
+ tristate "RouterBOARD 153 Compact Flash support"
|
|
||||||
+ depends on ADM5120_MACH_RB_153
|
|
||||||
+ help
|
|
||||||
+ This option enables support for a Compact Flash connected on
|
|
||||||
+ the RouterBOARD 153.
|
|
||||||
+
|
|
||||||
+ If unsure, say N.
|
|
||||||
+
|
|
||||||
config PATA_RB532
|
|
||||||
tristate "RouterBoard 532 PATA CompactFlash support"
|
|
||||||
depends on MIKROTIK_RB532
|
|
||||||
|
|
@ -1,378 +0,0 @@
|
||||||
--- a/drivers/serial/amba-pl010.c
|
|
||||||
+++ b/drivers/serial/amba-pl010.c
|
|
||||||
@@ -50,11 +50,10 @@
|
|
||||||
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
-#define UART_NR 8
|
|
||||||
-
|
|
||||||
#define SERIAL_AMBA_MAJOR 204
|
|
||||||
#define SERIAL_AMBA_MINOR 16
|
|
||||||
-#define SERIAL_AMBA_NR UART_NR
|
|
||||||
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
|
||||||
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
|
|
||||||
|
|
||||||
#define AMBA_ISR_PASS_LIMIT 256
|
|
||||||
|
|
||||||
@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po
|
|
||||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
||||||
unsigned int cr;
|
|
||||||
|
|
||||||
- cr = readb(uap->port.membase + UART010_CR);
|
|
||||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
||||||
cr &= ~UART010_CR_TIE;
|
|
||||||
- writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void pl010_start_tx(struct uart_port *port)
|
|
||||||
@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p
|
|
||||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
||||||
unsigned int cr;
|
|
||||||
|
|
||||||
- cr = readb(uap->port.membase + UART010_CR);
|
|
||||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
||||||
cr |= UART010_CR_TIE;
|
|
||||||
- writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void pl010_stop_rx(struct uart_port *port)
|
|
||||||
@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po
|
|
||||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
||||||
unsigned int cr;
|
|
||||||
|
|
||||||
- cr = readb(uap->port.membase + UART010_CR);
|
|
||||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
||||||
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
|
||||||
- writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void pl010_enable_ms(struct uart_port *port)
|
|
||||||
@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_
|
|
||||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
||||||
unsigned int cr;
|
|
||||||
|
|
||||||
- cr = readb(uap->port.membase + UART010_CR);
|
|
||||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
||||||
cr |= UART010_CR_MSIE;
|
|
||||||
- writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void pl010_rx_chars(struct uart_amba_port *uap)
|
|
||||||
@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a
|
|
||||||
struct tty_struct *tty = uap->port.state->port.tty;
|
|
||||||
unsigned int status, ch, flag, rsr, max_count = 256;
|
|
||||||
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
while (UART_RX_DATA(status) && max_count--) {
|
|
||||||
- ch = readb(uap->port.membase + UART01x_DR);
|
|
||||||
+ ch = __raw_readl(uap->port.membase + UART01x_DR);
|
|
||||||
flag = TTY_NORMAL;
|
|
||||||
|
|
||||||
uap->port.icount.rx++;
|
|
||||||
@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a
|
|
||||||
* Note that the error handling code is
|
|
||||||
* out of the main execution path
|
|
||||||
*/
|
|
||||||
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
|
||||||
+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
|
||||||
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
|
||||||
- writel(0, uap->port.membase + UART01x_ECR);
|
|
||||||
+ __raw_writel(0, uap->port.membase + UART01x_ECR);
|
|
||||||
|
|
||||||
if (rsr & UART01x_RSR_BE) {
|
|
||||||
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
|
|
||||||
@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a
|
|
||||||
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
|
||||||
|
|
||||||
ignore_char:
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
}
|
|
||||||
spin_unlock(&uap->port.lock);
|
|
||||||
tty_flip_buffer_push(tty);
|
|
||||||
@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a
|
|
||||||
int count;
|
|
||||||
|
|
||||||
if (uap->port.x_char) {
|
|
||||||
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
|
||||||
+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
|
||||||
uap->port.icount.tx++;
|
|
||||||
uap->port.x_char = 0;
|
|
||||||
return;
|
|
||||||
@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a
|
|
||||||
|
|
||||||
count = uap->port.fifosize >> 1;
|
|
||||||
do {
|
|
||||||
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
|
||||||
+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
|
||||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
||||||
uap->port.icount.tx++;
|
|
||||||
if (uart_circ_empty(xmit))
|
|
||||||
@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua
|
|
||||||
{
|
|
||||||
unsigned int status, delta;
|
|
||||||
|
|
||||||
- writel(0, uap->port.membase + UART010_ICR);
|
|
||||||
+ __raw_writel(0, uap->port.membase + UART010_ICR);
|
|
||||||
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
||||||
|
|
||||||
delta = status ^ uap->old_status;
|
|
||||||
uap->old_status = status;
|
|
||||||
@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
||||||
|
|
||||||
spin_lock(&uap->port.lock);
|
|
||||||
|
|
||||||
- status = readb(uap->port.membase + UART010_IIR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
|
||||||
if (status) {
|
|
||||||
do {
|
|
||||||
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
|
||||||
@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
||||||
if (pass_counter-- == 0)
|
|
||||||
break;
|
|
||||||
|
|
||||||
- status = readb(uap->port.membase + UART010_IIR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
|
||||||
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
|
||||||
UART010_IIR_TIS));
|
|
||||||
handled = 1;
|
|
||||||
@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
||||||
static unsigned int pl010_tx_empty(struct uart_port *port)
|
|
||||||
{
|
|
||||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
||||||
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
|
||||||
}
|
|
||||||
|
|
||||||
@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru
|
|
||||||
unsigned int result = 0;
|
|
||||||
unsigned int status;
|
|
||||||
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
if (status & UART01x_FR_DCD)
|
|
||||||
result |= TIOCM_CAR;
|
|
||||||
if (status & UART01x_FR_DSR)
|
|
||||||
@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_
|
|
||||||
unsigned int lcr_h;
|
|
||||||
|
|
||||||
spin_lock_irqsave(&uap->port.lock, flags);
|
|
||||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
||||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
|
||||||
if (break_state == -1)
|
|
||||||
lcr_h |= UART01x_LCRH_BRK;
|
|
||||||
else
|
|
||||||
lcr_h &= ~UART01x_LCRH_BRK;
|
|
||||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
||||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
||||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
||||||
}
|
|
||||||
|
|
||||||
@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por
|
|
||||||
/*
|
|
||||||
* initialise the old status of the modem signals
|
|
||||||
*/
|
|
||||||
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
||||||
+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Finally, enable interrupts
|
|
||||||
*/
|
|
||||||
- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
|
||||||
+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
|
||||||
uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p
|
|
||||||
/*
|
|
||||||
* disable all interrupts, disable the port
|
|
||||||
*/
|
|
||||||
- writel(0, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
/* disable break condition and fifos */
|
|
||||||
- writel(readb(uap->port.membase + UART010_LCRH) &
|
|
||||||
+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
|
|
||||||
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
|
||||||
uap->port.membase + UART010_LCRH);
|
|
||||||
|
|
||||||
@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port
|
|
||||||
/*
|
|
||||||
* Ask the core to calculate the divisor for us.
|
|
||||||
*/
|
|
||||||
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
|
||||||
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
|
||||||
quot = uart_get_divisor(port, baud);
|
|
||||||
|
|
||||||
switch (termios->c_cflag & CSIZE) {
|
|
||||||
@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port
|
|
||||||
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
|
||||||
|
|
||||||
/* first, disable everything */
|
|
||||||
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
|
||||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
|
||||||
|
|
||||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
|
||||||
old_cr |= UART010_CR_MSIE;
|
|
||||||
|
|
||||||
- writel(0, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
/* Set baud rate */
|
|
||||||
quot -= 1;
|
|
||||||
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
|
||||||
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
|
||||||
+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
|
||||||
+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* ----------v----------v----------v----------v-----
|
|
||||||
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
|
|
||||||
* ----------^----------^----------^----------^-----
|
|
||||||
*/
|
|
||||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
||||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
||||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
||||||
}
|
|
||||||
@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops =
|
|
||||||
.verify_port = pl010_verify_port,
|
|
||||||
};
|
|
||||||
|
|
||||||
-static struct uart_amba_port *amba_ports[UART_NR];
|
|
||||||
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
|
||||||
|
|
||||||
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
|
||||||
|
|
||||||
@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct
|
|
||||||
unsigned int status;
|
|
||||||
|
|
||||||
do {
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
barrier();
|
|
||||||
} while (!UART_TX_READY(status));
|
|
||||||
- writel(ch, uap->port.membase + UART01x_DR);
|
|
||||||
+ __raw_writel(ch, uap->port.membase + UART01x_DR);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void
|
|
||||||
@@ -565,8 +564,8 @@ pl010_console_write(struct console *co,
|
|
||||||
/*
|
|
||||||
* First save the CR then disable the interrupts
|
|
||||||
*/
|
|
||||||
- old_cr = readb(uap->port.membase + UART010_CR);
|
|
||||||
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
|
||||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
|
||||||
|
|
||||||
@@ -575,10 +574,10 @@ pl010_console_write(struct console *co,
|
|
||||||
* and restore the TCR
|
|
||||||
*/
|
|
||||||
do {
|
|
||||||
- status = readb(uap->port.membase + UART01x_FR);
|
|
||||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
||||||
barrier();
|
|
||||||
} while (status & UART01x_FR_BUSY);
|
|
||||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
|
||||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
|
||||||
|
|
||||||
clk_disable(uap->clk);
|
|
||||||
}
|
|
||||||
@@ -587,9 +586,9 @@ static void __init
|
|
||||||
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
|
||||||
int *parity, int *bits)
|
|
||||||
{
|
|
||||||
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
|
||||||
+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
|
||||||
unsigned int lcr_h, quot;
|
|
||||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
||||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
|
||||||
|
|
||||||
*parity = 'n';
|
|
||||||
if (lcr_h & UART01x_LCRH_PEN) {
|
|
||||||
@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am
|
|
||||||
else
|
|
||||||
*bits = 8;
|
|
||||||
|
|
||||||
- quot = readb(uap->port.membase + UART010_LCRL) |
|
|
||||||
- readb(uap->port.membase + UART010_LCRM) << 8;
|
|
||||||
+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
|
|
||||||
+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
|
|
||||||
*baud = uap->port.uartclk / (16 * (quot + 1));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st
|
|
||||||
* if so, search for the first available port that does have
|
|
||||||
* console support.
|
|
||||||
*/
|
|
||||||
- if (co->index >= UART_NR)
|
|
||||||
+ if (co->index >= SERIAL_AMBA_NR)
|
|
||||||
co->index = 0;
|
|
||||||
uap = amba_ports[co->index];
|
|
||||||
if (!uap)
|
|
||||||
@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st
|
|
||||||
|
|
||||||
static struct uart_driver amba_reg;
|
|
||||||
static struct console amba_console = {
|
|
||||||
- .name = "ttyAM",
|
|
||||||
+ .name = SERIAL_AMBA_NAME,
|
|
||||||
.write = pl010_console_write,
|
|
||||||
.device = uart_console_device,
|
|
||||||
.setup = pl010_console_setup,
|
|
||||||
@@ -657,11 +656,11 @@ static struct console amba_console = {
|
|
||||||
|
|
||||||
static struct uart_driver amba_reg = {
|
|
||||||
.owner = THIS_MODULE,
|
|
||||||
- .driver_name = "ttyAM",
|
|
||||||
- .dev_name = "ttyAM",
|
|
||||||
+ .driver_name = SERIAL_AMBA_NAME,
|
|
||||||
+ .dev_name = SERIAL_AMBA_NAME,
|
|
||||||
.major = SERIAL_AMBA_MAJOR,
|
|
||||||
.minor = SERIAL_AMBA_MINOR,
|
|
||||||
- .nr = UART_NR,
|
|
||||||
+ .nr = SERIAL_AMBA_NR,
|
|
||||||
.cons = AMBA_CONSOLE,
|
|
||||||
};
|
|
||||||
|
|
||||||
--- a/drivers/serial/Kconfig
|
|
||||||
+++ b/drivers/serial/Kconfig
|
|
||||||
@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010
|
|
||||||
help
|
|
||||||
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
|
||||||
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
|
||||||
- Cirrus Logic EP93xx CPU, say Y or M here.
|
|
||||||
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
|
||||||
|
|
||||||
If unsure, say N.
|
|
||||||
|
|
||||||
+config SERIAL_AMBA_PL010_NUMPORTS
|
|
||||||
+ int "Maximum number of AMBA PL010 serial ports"
|
|
||||||
+ depends on SERIAL_AMBA_PL010
|
|
||||||
+ default "8"
|
|
||||||
+ ---help---
|
|
||||||
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
|
||||||
+ to support.
|
|
||||||
+
|
|
||||||
+config SERIAL_AMBA_PL010_PORTNAME
|
|
||||||
+ string "Name of the AMBA PL010 serial ports"
|
|
||||||
+ depends on SERIAL_AMBA_PL010
|
|
||||||
+ default "ttyAM"
|
|
||||||
+ ---help---
|
|
||||||
+ ::: To be written :::
|
|
||||||
+
|
|
||||||
config SERIAL_AMBA_PL010_CONSOLE
|
|
||||||
bool "Support for console on AMBA serial port"
|
|
||||||
depends on SERIAL_AMBA_PL010=y
|
|
||||||
|
|
@ -1,13 +0,0 @@
|
||||||
--- a/drivers/amba/bus.c
|
|
||||||
+++ b/drivers/amba/bus.c
|
|
||||||
@@ -18,6 +18,10 @@
|
|
||||||
#include <asm/irq.h>
|
|
||||||
#include <asm/sizes.h>
|
|
||||||
|
|
||||||
+#ifndef NO_IRQ
|
|
||||||
+#define NO_IRQ (-1)
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
#define to_amba_device(d) container_of(d, struct amba_device, dev)
|
|
||||||
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
|
|
||||||
|
|
||||||
|
|
@ -1,27 +0,0 @@
|
||||||
--- a/drivers/leds/leds-gpio.c
|
|
||||||
+++ b/drivers/leds/leds-gpio.c
|
|
||||||
@@ -44,13 +44,17 @@ static void gpio_led_set(struct led_clas
|
|
||||||
container_of(led_cdev, struct gpio_led_data, cdev);
|
|
||||||
int level;
|
|
||||||
|
|
||||||
- if (value == LED_OFF)
|
|
||||||
- level = 0;
|
|
||||||
- else
|
|
||||||
- level = 1;
|
|
||||||
-
|
|
||||||
- if (led_dat->active_low)
|
|
||||||
- level = !level;
|
|
||||||
+ switch (value) {
|
|
||||||
+ case LED_OFF:
|
|
||||||
+ level = led_dat->active_low ? 1 : 0;
|
|
||||||
+ break;
|
|
||||||
+ case LED_FULL:
|
|
||||||
+ level = led_dat->active_low ? 0 : 1;
|
|
||||||
+ break;
|
|
||||||
+ default:
|
|
||||||
+ level = value;
|
|
||||||
+ break;
|
|
||||||
+ }
|
|
||||||
|
|
||||||
/* Setting GPIOs with I2C/etc requires a task context, and we don't
|
|
||||||
* seem to have a reliable way to know if we're already in one; so
|
|
||||||
|
|
@ -1,31 +0,0 @@
|
||||||
--- a/drivers/watchdog/Kconfig
|
|
||||||
+++ b/drivers/watchdog/Kconfig
|
|
||||||
@@ -790,6 +790,18 @@ config RC32434_WDT
|
|
||||||
To compile this driver as a module, choose M here: the
|
|
||||||
module will be called rc32434_wdt.
|
|
||||||
|
|
||||||
+config ADM5120_WDT
|
|
||||||
+ tristate "Infineon ADM5120 SoC hardware watchdog"
|
|
||||||
+ depends on WATCHDOG && ADM5120
|
|
||||||
+ help
|
|
||||||
+ This is a driver for hardware watchdog integrated in Infineon
|
|
||||||
+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
|
|
||||||
+ it doesn't freeze, and if it does, it reboots your computer after a
|
|
||||||
+ certain amount of time.
|
|
||||||
+
|
|
||||||
+ To compile this driver as a module, choose M here: the module will be
|
|
||||||
+ called adm5120_wdt.
|
|
||||||
+
|
|
||||||
config INDYDOG
|
|
||||||
tristate "Indy/I2 Hardware Watchdog"
|
|
||||||
depends on SGI_HAS_INDYDOG
|
|
||||||
--- a/drivers/watchdog/Makefile
|
|
||||||
+++ b/drivers/watchdog/Makefile
|
|
||||||
@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
|
||||||
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
|
||||||
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
|
||||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
|
||||||
+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
|
|
||||||
|
|
||||||
# PARISC Architecture
|
|
||||||
|
|
||||||
|
|
@ -1,11 +0,0 @@
|
||||||
--- a/drivers/usb/host/adm5120-dbg.c
|
|
||||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
|
||||||
@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
|
|
||||||
|
|
||||||
#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
|
|
||||||
do { \
|
|
||||||
- if (next) { \
|
|
||||||
+ if (next != NULL) { \
|
|
||||||
unsigned s_len; \
|
|
||||||
s_len = scnprintf(*next, *size, format, ## arg); \
|
|
||||||
*size -= s_len; *next += s_len; \
|
|
||||||
|
|
@ -1,11 +0,0 @@
|
||||||
--- a/drivers/usb/host/adm5120-dbg.c
|
|
||||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
|
||||||
@@ -644,7 +644,7 @@ static ssize_t fill_registers_buffer(str
|
|
||||||
hcd->product_desc,
|
|
||||||
hcd_name);
|
|
||||||
|
|
||||||
- if (bus->controller->power.power_state.event) {
|
|
||||||
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
|
|
||||||
size -= scnprintf(next, size,
|
|
||||||
"SUSPENDED (no register access)\n");
|
|
||||||
goto done;
|
|
||||||
|
|
@ -1,116 +0,0 @@
|
||||||
--- a/drivers/usb/host/adm5120-dbg.c
|
|
||||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
|
||||||
@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
|
|
||||||
|
|
||||||
struct debug_buffer {
|
|
||||||
ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
|
|
||||||
- struct device *dev;
|
|
||||||
+ struct admhcd *ahcd;
|
|
||||||
struct mutex mutex; /* protect filling of buffer */
|
|
||||||
size_t count; /* number of characters filled into buffer */
|
|
||||||
char *page;
|
|
||||||
@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
|
|
||||||
|
|
||||||
static ssize_t fill_async_buffer(struct debug_buffer *buf)
|
|
||||||
{
|
|
||||||
- struct usb_bus *bus;
|
|
||||||
- struct usb_hcd *hcd;
|
|
||||||
struct admhcd *ahcd;
|
|
||||||
size_t temp;
|
|
||||||
unsigned long flags;
|
|
||||||
|
|
||||||
- bus = dev_get_drvdata(buf->dev);
|
|
||||||
- hcd = bus_to_hcd(bus);
|
|
||||||
- ahcd = hcd_to_admhcd(hcd);
|
|
||||||
+ ahcd = buf->ahcd;
|
|
||||||
|
|
||||||
spin_lock_irqsave(&ahcd->lock, flags);
|
|
||||||
temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
|
|
||||||
@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
|
|
||||||
|
|
||||||
static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
|
|
||||||
{
|
|
||||||
- struct usb_bus *bus;
|
|
||||||
- struct usb_hcd *hcd;
|
|
||||||
struct admhcd *ahcd;
|
|
||||||
struct ed **seen, *ed;
|
|
||||||
unsigned long flags;
|
|
||||||
@@ -530,9 +524,7 @@ static ssize_t fill_periodic_buffer(stru
|
|
||||||
return 0;
|
|
||||||
seen_count = 0;
|
|
||||||
|
|
||||||
- bus = dev_get_drvdata(buf->dev);
|
|
||||||
- hcd = bus_to_hcd(bus);
|
|
||||||
- ahcd = hcd_to_admhcd(hcd);
|
|
||||||
+ ahcd = buf->ahcd;
|
|
||||||
next = buf->page;
|
|
||||||
size = PAGE_SIZE;
|
|
||||||
|
|
||||||
@@ -615,7 +607,6 @@ static ssize_t fill_periodic_buffer(stru
|
|
||||||
|
|
||||||
static ssize_t fill_registers_buffer(struct debug_buffer *buf)
|
|
||||||
{
|
|
||||||
- struct usb_bus *bus;
|
|
||||||
struct usb_hcd *hcd;
|
|
||||||
struct admhcd *ahcd;
|
|
||||||
struct admhcd_regs __iomem *regs;
|
|
||||||
@@ -624,9 +615,8 @@ static ssize_t fill_registers_buffer(str
|
|
||||||
char *next;
|
|
||||||
u32 rdata;
|
|
||||||
|
|
||||||
- bus = dev_get_drvdata(buf->dev);
|
|
||||||
- hcd = bus_to_hcd(bus);
|
|
||||||
- ahcd = hcd_to_admhcd(hcd);
|
|
||||||
+ ahcd = buf->ahcd;
|
|
||||||
+ hcd = admhcd_to_hcd(ahcd);
|
|
||||||
regs = ahcd->regs;
|
|
||||||
next = buf->page;
|
|
||||||
size = PAGE_SIZE;
|
|
||||||
@@ -691,7 +681,7 @@ done:
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
-static struct debug_buffer *alloc_buffer(struct device *dev,
|
|
||||||
+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
|
|
||||||
ssize_t (*fill_func)(struct debug_buffer *))
|
|
||||||
{
|
|
||||||
struct debug_buffer *buf;
|
|
||||||
@@ -699,7 +689,7 @@ static struct debug_buffer *alloc_buffer
|
|
||||||
buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
|
|
||||||
|
|
||||||
if (buf) {
|
|
||||||
- buf->dev = dev;
|
|
||||||
+ buf->ahcd = ahcd;
|
|
||||||
buf->fill_func = fill_func;
|
|
||||||
mutex_init(&buf->mutex);
|
|
||||||
}
|
|
||||||
@@ -792,26 +782,25 @@ static int debug_registers_open(struct i
|
|
||||||
static inline void create_debug_files(struct admhcd *ahcd)
|
|
||||||
{
|
|
||||||
struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
|
|
||||||
- struct device *dev = bus->dev;
|
|
||||||
|
|
||||||
ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
|
|
||||||
if (!ahcd->debug_dir)
|
|
||||||
goto dir_error;
|
|
||||||
|
|
||||||
ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
|
|
||||||
- ahcd->debug_dir, dev,
|
|
||||||
+ ahcd->debug_dir, ahcd,
|
|
||||||
&debug_async_fops);
|
|
||||||
if (!ahcd->debug_async)
|
|
||||||
goto async_error;
|
|
||||||
|
|
||||||
ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
|
|
||||||
- ahcd->debug_dir, dev,
|
|
||||||
+ ahcd->debug_dir, ahcd,
|
|
||||||
&debug_periodic_fops);
|
|
||||||
if (!ahcd->debug_periodic)
|
|
||||||
goto periodic_error;
|
|
||||||
|
|
||||||
ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
|
|
||||||
- ahcd->debug_dir, dev,
|
|
||||||
+ ahcd->debug_dir, ahcd,
|
|
||||||
&debug_registers_fops);
|
|
||||||
if (!ahcd->debug_registers)
|
|
||||||
goto registers_error;
|
|
||||||
|
|
@ -1,209 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
CONFIG_ADM5120=y
|
|
||||||
CONFIG_ADM5120_ENET=y
|
|
||||||
CONFIG_ADM5120_MACH_5GXI=y
|
|
||||||
CONFIG_ADM5120_MACH_P_334WT=y
|
|
||||||
CONFIG_ADM5120_MACH_P_335=y
|
|
||||||
# CONFIG_ADM5120_OEM_CELLVISION is not set
|
|
||||||
# CONFIG_ADM5120_OEM_COMPEX is not set
|
|
||||||
# CONFIG_ADM5120_OEM_EDIMAX is not set
|
|
||||||
# CONFIG_ADM5120_OEM_INFINEON is not set
|
|
||||||
# CONFIG_ADM5120_OEM_MIKROTIK is not set
|
|
||||||
# CONFIG_ADM5120_OEM_MOTOROLA is not set
|
|
||||||
CONFIG_ADM5120_OEM_OSBRIDGE=y
|
|
||||||
CONFIG_ADM5120_OEM_ZYXEL=y
|
|
||||||
CONFIG_ADM5120_SOC_BGA=y
|
|
||||||
CONFIG_ADM5120_WDT=y
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
CONFIG_ARM_AMBA=y
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BINFMT_MISC=m
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
|
|
||||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
|
|
||||||
CONFIG_CPU_BIG_ENDIAN=y
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
CONFIG_CPU_MIPS32_R1=y
|
|
||||||
# CONFIG_CPU_MIPS32_R2 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR1=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
CONFIG_DEVPORT=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
CONFIG_ELF_CORE=y
|
|
||||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
|
||||||
CONFIG_FS_POSIX_ACL=y
|
|
||||||
CONFIG_GENERIC_ACL=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
# CONFIG_GPIO_PL061 is not set
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HID=m
|
|
||||||
CONFIG_HID_SUPPORT=y
|
|
||||||
CONFIG_HW_HAS_PCI=y
|
|
||||||
CONFIG_HW_RANDOM=y
|
|
||||||
CONFIG_HZ=250
|
|
||||||
# CONFIG_HZ_100 is not set
|
|
||||||
CONFIG_HZ_250=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_INOTIFY=y
|
|
||||||
CONFIG_INOTIFY_USER=y
|
|
||||||
CONFIG_INPUT=m
|
|
||||||
# CONFIG_INPUT_GPIO_BUTTONS is not set
|
|
||||||
# CONFIG_INPUT_YEALINK is not set
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
CONFIG_LEDS_GPIO=m
|
|
||||||
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
|
|
||||||
CONFIG_LEGACY_PTYS=y
|
|
||||||
CONFIG_LEGACY_PTY_COUNT=256
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
CONFIG_MII=m
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
|
||||||
CONFIG_MTD_ADM5120=y
|
|
||||||
CONFIG_MTD_BLOCK2MTD=y
|
|
||||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
CONFIG_MTD_TRXSPLIT=y
|
|
||||||
# CONFIG_NET_PCI is not set
|
|
||||||
CONFIG_NLS=m
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
# CONFIG_PARTITION_ADVANCED is not set
|
|
||||||
CONFIG_PCI=y
|
|
||||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
|
||||||
CONFIG_PCI_DOMAINS=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
# CONFIG_PROBE_INITRD_HEADER is not set
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
# CONFIG_SCSI_DMA is not set
|
|
||||||
# CONFIG_SERIAL_8250 is not set
|
|
||||||
CONFIG_SERIAL_AMBA_PL010=y
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
|
||||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
|
||||||
CONFIG_SERIO=y
|
|
||||||
# CONFIG_SERIO_AMBAKMI is not set
|
|
||||||
# CONFIG_SERIO_I8042 is not set
|
|
||||||
# CONFIG_SERIO_LIBPS2 is not set
|
|
||||||
# CONFIG_SERIO_PCIPS2 is not set
|
|
||||||
# CONFIG_SERIO_RAW is not set
|
|
||||||
CONFIG_SERIO_SERPORT=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOFT_WATCHDOG=m
|
|
||||||
CONFIG_SWAP_IO_SPACE=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
CONFIG_TMPFS_POSIX_ACL=y
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
# CONFIG_TREE_PREEMPT_RCU is not set
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB=m
|
|
||||||
CONFIG_USB_ADM5120_HCD=m
|
|
||||||
CONFIG_USB_DEBUG=y
|
|
||||||
CONFIG_USB_EHCI_HCD=m
|
|
||||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
||||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
||||||
CONFIG_USB_OHCI_HCD=m
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
# CONFIG_USB_UHCI_HCD is not set
|
|
||||||
CONFIG_VM_EVENT_COUNTERS=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
||||||
|
|
@ -1,265 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
CONFIG_ADM5120=y
|
|
||||||
CONFIG_ADM5120_ENET=y
|
|
||||||
CONFIG_ADM5120_MACH_5GXI=y
|
|
||||||
CONFIG_ADM5120_MACH_BR_6104K=y
|
|
||||||
CONFIG_ADM5120_MACH_BR_6104KP=y
|
|
||||||
CONFIG_ADM5120_MACH_BR_61X4WG=y
|
|
||||||
CONFIG_ADM5120_MACH_CAS_771=y
|
|
||||||
CONFIG_ADM5120_MACH_EASY5120P_ATA=y
|
|
||||||
CONFIG_ADM5120_MACH_EASY5120_RT=y
|
|
||||||
CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
|
|
||||||
CONFIG_ADM5120_MACH_EASY83000=y
|
|
||||||
CONFIG_ADM5120_MACH_EB_214A=y
|
|
||||||
CONFIG_ADM5120_MACH_NFS_101=y
|
|
||||||
CONFIG_ADM5120_MACH_NP27G=y
|
|
||||||
CONFIG_ADM5120_MACH_NP28G=y
|
|
||||||
CONFIG_ADM5120_MACH_PMUGW=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_11X=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_133=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_133C=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_150=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_153=y
|
|
||||||
CONFIG_ADM5120_MACH_RB_192=y
|
|
||||||
CONFIG_ADM5120_MACH_WP54=y
|
|
||||||
CONFIG_ADM5120_OEM_CELLVISION=y
|
|
||||||
CONFIG_ADM5120_OEM_COMPEX=y
|
|
||||||
CONFIG_ADM5120_OEM_EDIMAX=y
|
|
||||||
CONFIG_ADM5120_OEM_GENERIC=y
|
|
||||||
CONFIG_ADM5120_OEM_INFINEON=y
|
|
||||||
CONFIG_ADM5120_OEM_MIKROTIK=y
|
|
||||||
CONFIG_ADM5120_OEM_MOTOROLA=y
|
|
||||||
CONFIG_ADM5120_OEM_OSBRIDGE=y
|
|
||||||
# CONFIG_ADM5120_OEM_ZYXEL is not set
|
|
||||||
CONFIG_ADM5120_SOC_BGA=y
|
|
||||||
CONFIG_ADM5120_WDT=y
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
CONFIG_ARM_AMBA=y
|
|
||||||
CONFIG_ATA=m
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
|
|
||||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
|
|
||||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
CONFIG_CPU_MIPS32_R1=y
|
|
||||||
# CONFIG_CPU_MIPS32_R2 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR1=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CRYPTO_AEAD2=y
|
|
||||||
CONFIG_CRYPTO_AES=m
|
|
||||||
CONFIG_CRYPTO_ARC4=m
|
|
||||||
CONFIG_CRYPTO_BLKCIPHER=m
|
|
||||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
|
||||||
CONFIG_CRYPTO_ECB=m
|
|
||||||
CONFIG_CRYPTO_HASH=m
|
|
||||||
CONFIG_CRYPTO_HASH2=y
|
|
||||||
CONFIG_CRYPTO_MANAGER=m
|
|
||||||
CONFIG_CRYPTO_MANAGER2=y
|
|
||||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
|
||||||
CONFIG_CRYPTO_RNG2=y
|
|
||||||
CONFIG_CRYPTO_WORKQUEUE=y
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
CONFIG_DEVPORT=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
CONFIG_ELF_CORE=y
|
|
||||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
|
||||||
CONFIG_FS_POSIX_ACL=y
|
|
||||||
CONFIG_GENERIC_ACL=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
# CONFIG_GPIO_PL061 is not set
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
# CONFIG_HAMRADIO is not set
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HID=m
|
|
||||||
CONFIG_HID_SUPPORT=y
|
|
||||||
CONFIG_HOSTAP=m
|
|
||||||
CONFIG_HOSTAP_FIRMWARE=y
|
|
||||||
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
|
|
||||||
CONFIG_HOSTAP_PCI=m
|
|
||||||
CONFIG_HW_HAS_PCI=y
|
|
||||||
CONFIG_HW_RANDOM=y
|
|
||||||
CONFIG_HZ=250
|
|
||||||
# CONFIG_HZ_100 is not set
|
|
||||||
CONFIG_HZ_250=y
|
|
||||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_INOTIFY=y
|
|
||||||
CONFIG_INOTIFY_USER=y
|
|
||||||
CONFIG_INPUT=m
|
|
||||||
# CONFIG_INPUT_GPIO_BUTTONS is not set
|
|
||||||
# CONFIG_INPUT_YEALINK is not set
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
CONFIG_KEXEC=y
|
|
||||||
CONFIG_LEDS_GPIO=m
|
|
||||||
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
|
|
||||||
CONFIG_LEGACY_PTYS=y
|
|
||||||
CONFIG_LEGACY_PTY_COUNT=256
|
|
||||||
CONFIG_LIB80211=m
|
|
||||||
CONFIG_LIB80211_CRYPT_CCMP=m
|
|
||||||
CONFIG_LIB80211_CRYPT_TKIP=m
|
|
||||||
CONFIG_LIB80211_CRYPT_WEP=m
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
CONFIG_MII=m
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
|
||||||
CONFIG_MTD_ADM5120=y
|
|
||||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
CONFIG_MTD_JEDECPROBE=y
|
|
||||||
CONFIG_MTD_MYLOADER_PARTS=y
|
|
||||||
CONFIG_MTD_NAND=y
|
|
||||||
CONFIG_MTD_NAND_PLATFORM=y
|
|
||||||
CONFIG_MTD_TRXSPLIT=y
|
|
||||||
CONFIG_NLS=m
|
|
||||||
CONFIG_NO_HZ=y
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
# CONFIG_PARTITION_ADVANCED is not set
|
|
||||||
CONFIG_PCI=y
|
|
||||||
CONFIG_PATA_RB153_CF=m
|
|
||||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
|
||||||
CONFIG_PCI_DOMAINS=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
# CONFIG_PROBE_INITRD_HEADER is not set
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
CONFIG_SCSI=m
|
|
||||||
# CONFIG_SERIAL_8250 is not set
|
|
||||||
CONFIG_SERIAL_AMBA_PL010=y
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
|
||||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
|
||||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
|
||||||
CONFIG_SERIO=y
|
|
||||||
# CONFIG_SERIO_AMBAKMI is not set
|
|
||||||
# CONFIG_SERIO_I8042 is not set
|
|
||||||
# CONFIG_SERIO_LIBPS2 is not set
|
|
||||||
# CONFIG_SERIO_PCIPS2 is not set
|
|
||||||
# CONFIG_SERIO_RAW is not set
|
|
||||||
CONFIG_SERIO_SERPORT=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOFT_WATCHDOG=m
|
|
||||||
# CONFIG_SWAP is not set
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_TC35815 is not set
|
|
||||||
CONFIG_TMPFS_POSIX_ACL=y
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
# CONFIG_TREE_PREEMPT_RCU is not set
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB=m
|
|
||||||
CONFIG_USB_ADM5120_HCD=m
|
|
||||||
CONFIG_USB_EHCI_HCD=m
|
|
||||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
||||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
||||||
CONFIG_USB_OHCI_HCD=m
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
# CONFIG_USB_UHCI_HCD is not set
|
|
||||||
CONFIG_VM_EVENT_COUNTERS=y
|
|
||||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
|
||||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
|
||||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
||||||
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
||||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
||||||
CONFIG_YAFFS_FS=y
|
|
||||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
||||||
CONFIG_YAFFS_YAFFS1=y
|
|
||||||
CONFIG_YAFFS_YAFFS2=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
||||||
Loading…
Reference in New Issue