mirror of https://github.com/hak5/openwrt.git
Florian Fainelli
parent
c07d990490
commit
137e963057
|
|
@ -11,7 +11,7 @@ BOARD:=au1000
|
|||
BOARDNAME:=AMD Alchemy AU1x00
|
||||
FEATURES:=jffs2 usb pci
|
||||
|
||||
LINUX_VERSION:=2.6.22.4
|
||||
LINUX_VERSION:=2.6.23
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
DEFAULT_PACKAGES += yamonenv
|
||||
|
|
|
|||
|
|
@ -4,8 +4,8 @@ CONFIG_64BIT_PHYS_ADDR=y
|
|||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_B44 is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
|
|
@ -16,6 +16,7 @@ CONFIG_CPU_HAS_LLSC=y
|
|||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
# CONFIG_CPU_LOONGSON2 is not set
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
# CONFIG_CPU_MIPS32_R2 is not set
|
||||
|
|
@ -41,41 +42,40 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CRAMFS=m
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_DDB5477 is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_DS1682 is not set
|
||||
CONFIG_DUMMY=m
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
# CONFIG_HZ_1024 is not set
|
||||
# CONFIG_HZ_128 is not set
|
||||
CONFIG_HZ_250=y
|
||||
# CONFIG_HZ_256 is not set
|
||||
# CONFIG_HZ_48 is not set
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_ALGOBIT=m
|
||||
CONFIG_I2C_ALGOPCA=m
|
||||
CONFIG_I2C_ALGOPCF=m
|
||||
CONFIG_I2C_AU1X00GPIO=m
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
# CONFIG_I2C_TAOS_EVM is not set
|
||||
# CONFIG_IDE is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_LEDS_MTX1=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
# CONFIG_LEDS_TRIGGERS is not set
|
||||
# CONFIG_LEMOTE_FULONG is not set
|
||||
CONFIG_MACH_ALCHEMY=y
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
|
|
@ -91,7 +91,6 @@ CONFIG_MIPS_AU1X00_ENET=y
|
|||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
|
|
@ -106,14 +105,8 @@ CONFIG_MIPS_MT_DISABLED=y
|
|||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MIPS_VPE_LOADER is not set
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
# CONFIG_MOMENCO_OCELOT_G is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_ALCHEMY is not set
|
||||
|
|
@ -148,7 +141,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
CONFIG_MTD_MTX1=y
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
|
|
@ -159,20 +151,23 @@ CONFIG_MTD_PARTITIONS=y
|
|||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
CONFIG_MTX1_WATCHDOG=y
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
CONFIG_NET_ACT_POLICE=y
|
||||
CONFIG_NET_SCH_FIFO=y
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
CONFIG_NF_CT_PROTO_GRE=m
|
||||
CONFIG_NF_NAT_PROTO_GRE=m
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNPACPI is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_PPP_MPPE is not set
|
||||
|
|
@ -180,10 +175,13 @@ CONFIG_PHYLIB=y
|
|||
# CONFIG_QSEMI_PHY is not set
|
||||
CONFIG_RESOURCES_64BIT=y
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_RTL8187 is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
CONFIG_SERIAL_8250_AU1X00=y
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
|
|
@ -209,7 +207,6 @@ CONFIG_SOC_AU1X00=y
|
|||
CONFIG_SOFT_WATCHDOG=m
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_STRIP=m
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
|
|
@ -217,24 +214,23 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_KGDB=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_TC35815 is not set
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_USBPCWATCHDOG is not set
|
||||
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
||||
# CONFIG_USB_EHCI_SPLIT_ISO is not set
|
||||
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
# CONFIG_USB_SERIAL_OTI6858 is not set
|
||||
CONFIG_USB_UHCI_HCD=m
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
CONFIG_WDT_MTX1=y
|
||||
CONFIG_ZONE_DMA=y
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -26,13 +26,31 @@
|
|||
|
||||
#include <asm/gpio.h>
|
||||
|
||||
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
|
||||
static struct gpio_led default_leds[] = {
|
||||
{ .name = "mtx1:green", .gpio = 211, .active_low = 1, },
|
||||
{ .name = "mtx1:red", gpio = 212, .active_low = 1, },
|
||||
}
|
||||
static struct resource mtx1_wdt_res[] = {
|
||||
[0] = {
|
||||
.start = 15,
|
||||
.end = 15,
|
||||
.name = "mtx1-wdt-gpio",
|
||||
.flags = IORESOURCE_IRQ,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data mtx1_led_data;
|
||||
static struct platform_device mtx1_wdt = {
|
||||
.name = "mtx1-wdt",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(mtx1_wdt_res),
|
||||
.resource = mtx1_wdt_res,
|
||||
};
|
||||
|
||||
static struct gpio_led default_leds[] = {
|
||||
{ .name = "mtx1:green", .gpio = 211, },
|
||||
{ .name = "mtx1:red", .gpio = 212, },
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data mtx1_led_data = {
|
||||
.num_leds = ARRAY_SIZE(default_leds),
|
||||
.leds = default_leds,
|
||||
};
|
||||
|
||||
static struct platform_device mtx1_gpio_leds = {
|
||||
.name = "leds-gpio",
|
||||
|
|
@ -41,18 +59,16 @@ static struct platform_device mtx1_gpio_leds = {
|
|||
.platform_data = &mtx1_led_data,
|
||||
}
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct platform_device *mtx1_devs[] = {
|
||||
&mtx1_gpio_leds,
|
||||
&mtx1_wdt
|
||||
};
|
||||
|
||||
static int __init mtx1_register_devices(void)
|
||||
{
|
||||
int res;
|
||||
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
|
||||
mtx1_led_data.num_leds = ARRAY_SIZE(default_leds);
|
||||
mtx1_led_data.leds = default_leds;
|
||||
res = platform_device_register(&mtx1_gpio_leds);
|
||||
#endif
|
||||
return res;
|
||||
return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
|
||||
}
|
||||
|
||||
arch_initall(mtx1_register_devices);
|
||||
arch_initcall(mtx1_register_devices);
|
||||
|
||||
|
|
|
|||
|
|
@ -1,101 +0,0 @@
|
|||
/*
|
||||
* LED driver for MTX-1 boards
|
||||
*
|
||||
* Copyright 2007 Florian Fainelli <florian@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/err.h>
|
||||
#include <asm/gpio.h>
|
||||
|
||||
static struct platform_device *pdev;
|
||||
|
||||
static void mtx1_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
|
||||
{
|
||||
if (!strcmp("mtx1:green", led_cdev->name))
|
||||
gpio_set_value(211, brightness ? 1 : 0);
|
||||
else
|
||||
gpio_set_value(212, brightness ? 1 : 0);
|
||||
}
|
||||
|
||||
static struct led_classdev mtx1_green_led = {
|
||||
.name = "mtx1:green",
|
||||
.brightness_set = mtx1_led_set,
|
||||
};
|
||||
|
||||
static struct led_classdev mtx1_red_led = {
|
||||
.name = "mtx1:red",
|
||||
.brightness_set = mtx1_led_set,
|
||||
};
|
||||
|
||||
static int mtx1_leds_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = led_classdev_register(&pdev->dev, &mtx1_green_led);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
|
||||
ret = led_classdev_register(&pdev->dev, &mtx1_red_led);
|
||||
if (ret < 0)
|
||||
led_classdev_unregister(&mtx1_green_led);
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mtx1_leds_remove(struct platform_device *pdev)
|
||||
{
|
||||
led_classdev_unregister(&mtx1_green_led);
|
||||
led_classdev_unregister(&mtx1_red_led);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver mtx1_leds_driver = {
|
||||
.probe = mtx1_leds_probe,
|
||||
.remove = mtx1_leds_remove,
|
||||
.driver = {
|
||||
.name = "mtx1-leds",
|
||||
}
|
||||
};
|
||||
|
||||
static int __init mtx1_leds_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = platform_driver_register(&mtx1_leds_driver);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
|
||||
pdev = platform_device_register_simple("mtx1-leds", -1, NULL, 0);
|
||||
if (IS_ERR(pdev)) {
|
||||
ret = PTR_ERR(pdev);
|
||||
platform_driver_unregister(&mtx1_leds_driver);
|
||||
goto out;
|
||||
}
|
||||
|
||||
out:
|
||||
return ret;
|
||||
|
||||
}
|
||||
|
||||
static void __exit mtx1_leds_exit(void)
|
||||
{
|
||||
platform_device_unregister(pdev);
|
||||
platform_driver_unregister(&mtx1_leds_driver);
|
||||
}
|
||||
|
||||
module_init(mtx1_leds_init);
|
||||
module_exit(mtx1_leds_exit);
|
||||
|
||||
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
|
||||
MODULE_DESCRIPTION("MTX-1 LED driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
From 8dea23a2b6dae52267b3a969e715d3f0753acf47 Mon Sep 17 00:00:00 2001
|
||||
From: Florian Fainelli <florian.fainelli@telecomint.eu>
|
||||
Date: Wed, 10 Oct 2007 14:54:11 +0200
|
||||
Subject: [PATCH] [PATCH] Add missing generic GPIO support for au1000
|
||||
With the generic GPIO support for au1000, we do not
|
||||
select it in the kernel configuration.
|
||||
|
||||
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
|
||||
---
|
||||
arch/mips/au1000/Kconfig | 1 +
|
||||
1 files changed, 1 insertions(+), 0 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
|
||||
index 29c95d9..f03b2eb 100644
|
||||
--- a/arch/mips/au1000/Kconfig
|
||||
+++ b/arch/mips/au1000/Kconfig
|
||||
@@ -141,3 +141,4 @@ config SOC_AU1X00
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_APM_EMULATION
|
||||
select SYS_SUPPORTS_KGDB
|
||||
+ select GENERIC_GPIO
|
||||
--
|
||||
1.5.2.4
|
||||
|
||||
|
|
@ -1,294 +0,0 @@
|
|||
diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
|
||||
--- linux-2.6.21.1/arch/mips/au1000/common/gpio.c 2007-04-27 23:49:26.000000000 +0200
|
||||
+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c 2007-05-22 21:41:55.000000000 +0200
|
||||
@@ -1,4 +1,7 @@
|
||||
/*
|
||||
+ * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
|
||||
+ * Architecture specific GPIO support
|
||||
+ *
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
@@ -18,101 +21,133 @@
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
+ *
|
||||
+ * Notes :
|
||||
+ * au1000 SoC have only one GPIO line : GPIO1
|
||||
+ * others have a second one : GPIO2
|
||||
*/
|
||||
+
|
||||
+#include <linux/autoconf.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/types.h>
|
||||
#include <linux/module.h>
|
||||
-#include <au1000.h>
|
||||
-#include <au1xxx_gpio.h>
|
||||
+
|
||||
+#include <asm/addrspace.h>
|
||||
+#include <asm/io.h>
|
||||
+
|
||||
+#include <asm/mach-au1x00/au1000.h>
|
||||
+#include <asm/gpio.h>
|
||||
|
||||
#define gpio1 sys
|
||||
#if !defined(CONFIG_SOC_AU1000)
|
||||
static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
|
||||
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
|
||||
|
||||
-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
|
||||
-
|
||||
-int au1xxx_gpio2_read(int signal)
|
||||
+static int au1xxx_gpio2_read(unsigned gpio)
|
||||
{
|
||||
- signal -= 200;
|
||||
-/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */
|
||||
- return ((gpio2->pinstate >> signal) & 0x01);
|
||||
+ gpio -= AU1XXX_GPIO_BASE;
|
||||
+ return ((gpio2->pinstate >> gpio) & 0x01);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio2_write(int signal, int value)
|
||||
+static void au1xxx_gpio2_write(unsigned gpio, int value)
|
||||
{
|
||||
- signal -= 200;
|
||||
+ gpio -= AU1XXX_GPIO_BASE;
|
||||
|
||||
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
|
||||
- (value << signal);
|
||||
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
|
||||
+ (value << gpio);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio2_tristate(int signal)
|
||||
+static int au1xxx_gpio2_direction_input(unsigned gpio)
|
||||
{
|
||||
- signal -= 200;
|
||||
- gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */
|
||||
+ gpio -= AU1XXX_GPIO_BASE;
|
||||
+ gpio2->dir &= ~(0x01 << gpio);
|
||||
+ return 0;
|
||||
}
|
||||
-#endif
|
||||
|
||||
-int au1xxx_gpio1_read(int signal)
|
||||
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
|
||||
+{
|
||||
+ gpio -= AU1XXX_GPIO_BASE;
|
||||
+ gpio2->dir = (0x01 << gpio) | (value << gpio);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+#endif /* !defined(CONFIG_SOC_AU1000) */
|
||||
+
|
||||
+static int au1xxx_gpio1_read(unsigned gpio)
|
||||
{
|
||||
-/* gpio1->trioutclr |= (0x01 << signal); */
|
||||
- return ((gpio1->pinstaterd >> signal) & 0x01);
|
||||
+ return ((gpio1->pinstaterd >> gpio) & 0x01);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio1_write(int signal, int value)
|
||||
+static void au1xxx_gpio1_write(unsigned gpio, int value)
|
||||
{
|
||||
if(value)
|
||||
- gpio1->outputset = (0x01 << signal);
|
||||
+ gpio1->outputset = (0x01 << gpio);
|
||||
else
|
||||
- gpio1->outputclr = (0x01 << signal); /* Output a Zero */
|
||||
+ /* Output a zero */
|
||||
+ gpio1->outputclr = (0x01 << gpio);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio1_tristate(int signal)
|
||||
+static int au1xxx_gpio1_direction_input(unsigned gpio)
|
||||
{
|
||||
- gpio1->trioutclr = (0x01 << signal); /* Tristate signal */
|
||||
+ gpio1->pininputen = (0x01 << gpio);
|
||||
+ return 0;
|
||||
}
|
||||
|
||||
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
|
||||
+{
|
||||
+ gpio1->trioutclr = (0x01 & gpio);
|
||||
+ return 0;
|
||||
+}
|
||||
|
||||
-int au1xxx_gpio_read(int signal)
|
||||
+int au1xxx_gpio_get_value(unsigned gpio)
|
||||
{
|
||||
- if(signal >= 200)
|
||||
+ if(gpio >= AU1XXX_GPIO_BASE)
|
||||
#if defined(CONFIG_SOC_AU1000)
|
||||
return 0;
|
||||
#else
|
||||
- return au1xxx_gpio2_read(signal);
|
||||
+ return au1xxx_gpio2_read(gpio);
|
||||
#endif
|
||||
else
|
||||
- return au1xxx_gpio1_read(signal);
|
||||
+ return au1xxx_gpio1_read(gpio);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio_write(int signal, int value)
|
||||
+void au1xxx_gpio_set_value(unsigned gpio, int value)
|
||||
{
|
||||
- if(signal >= 200)
|
||||
+ if(gpio >= AU1XXX_GPIO_BASE)
|
||||
#if defined(CONFIG_SOC_AU1000)
|
||||
;
|
||||
#else
|
||||
- au1xxx_gpio2_write(signal, value);
|
||||
+ au1xxx_gpio2_write(gpio, value);
|
||||
#endif
|
||||
else
|
||||
- au1xxx_gpio1_write(signal, value);
|
||||
+ au1xxx_gpio1_write(gpio, value);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio_tristate(int signal)
|
||||
+int au1xxx_gpio_direction_input(unsigned gpio)
|
||||
{
|
||||
- if(signal >= 200)
|
||||
+ if (gpio >= AU1XXX_GPIO_BASE)
|
||||
#if defined(CONFIG_SOC_AU1000)
|
||||
;
|
||||
#else
|
||||
- au1xxx_gpio2_tristate(signal);
|
||||
+ return au1xxx_gpio2_direction_input(gpio);
|
||||
#endif
|
||||
else
|
||||
- au1xxx_gpio1_tristate(signal);
|
||||
+ return au1xxx_gpio1_direction_input(gpio);
|
||||
}
|
||||
|
||||
-void au1xxx_gpio1_set_inputs(void)
|
||||
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
|
||||
{
|
||||
- gpio1->pininputen = 0;
|
||||
+ if (gpio >= AU1XXX_GPIO_BASE)
|
||||
+#if defined(CONFIG_SOC_AU1000)
|
||||
+ ;
|
||||
+#else
|
||||
+ return au1xxx_gpio2_direction_output(gpio, value);
|
||||
+#endif
|
||||
+ else
|
||||
+ return au1xxx_gpio1_direction_output(gpio, value);
|
||||
}
|
||||
|
||||
-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
|
||||
-EXPORT_SYMBOL(au1xxx_gpio_tristate);
|
||||
-EXPORT_SYMBOL(au1xxx_gpio_write);
|
||||
-EXPORT_SYMBOL(au1xxx_gpio_read);
|
||||
+EXPORT_SYMBOL(au1xxx_gpio_direction_output);
|
||||
+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
|
||||
+EXPORT_SYMBOL(au1xxx_gpio_get_value);
|
||||
+EXPORT_SYMBOL(au1xxx_gpio_set_value);
|
||||
--- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200
|
||||
+++ linux-2.6.21.1.new/arch/mips/Kconfig 2007-05-21 08:04:42.000000000 +0200
|
||||
@@ -1044,6 +1044,7 @@
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_APM_EMULATION
|
||||
select SYS_SUPPORTS_KGDB
|
||||
+ select GENERIC_GPIO
|
||||
|
||||
config PNX8550
|
||||
bool
|
||||
diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
|
||||
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27 23:49:26.000000000 +0200
|
||||
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 1970-01-01 01:00:00.000000000 +0100
|
||||
@@ -1,20 +0,0 @@
|
||||
-#ifndef __AU1XXX_GPIO_H
|
||||
-#define __AU1XXX_GPIO_H
|
||||
-
|
||||
-void au1xxx_gpio1_set_inputs(void);
|
||||
-void au1xxx_gpio_tristate(int signal);
|
||||
-void au1xxx_gpio_write(int signal, int value);
|
||||
-int au1xxx_gpio_read(int signal);
|
||||
-
|
||||
-typedef volatile struct
|
||||
-{
|
||||
- u32 dir;
|
||||
- u32 reserved;
|
||||
- u32 output;
|
||||
- u32 pinstate;
|
||||
- u32 inten;
|
||||
- u32 enable;
|
||||
-
|
||||
-} AU1X00_GPIO2;
|
||||
-
|
||||
-#endif //__AU1XXX_GPIO_H
|
||||
diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
|
||||
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h 2007-05-21 01:10:22.000000000 +0200
|
||||
@@ -0,0 +1,69 @@
|
||||
+#ifndef _AU1XXX_GPIO_H_
|
||||
+#define _AU1XXX_GPIO_H_
|
||||
+
|
||||
+#define AU1XXX_GPIO_BASE 200
|
||||
+
|
||||
+typedef volatile struct
|
||||
+{
|
||||
+ u32 dir;
|
||||
+ u32 reserved;
|
||||
+ u32 output;
|
||||
+ u32 pinstate;
|
||||
+ u32 inten;
|
||||
+ u32 enable;
|
||||
+
|
||||
+} AU1X00_GPIO2;
|
||||
+
|
||||
+extern int au1xxx_gpio_get_value(unsigned gpio);
|
||||
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
|
||||
+extern int au1xxx_gpio_direction_input(unsigned gpio);
|
||||
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
|
||||
+
|
||||
+
|
||||
+/* Wrappers for the arch-neutral GPIO API */
|
||||
+
|
||||
+static inline int gpio_request(unsigned gpio, const char *label)
|
||||
+{
|
||||
+ /* Not yet implemented */
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static inline void gpio_free(unsigned gpio)
|
||||
+{
|
||||
+ /* Not yet implemented */
|
||||
+}
|
||||
+
|
||||
+static inline int gpio_direction_input(unsigned gpio)
|
||||
+{
|
||||
+ return au1xxx_gpio_direction_input(gpio);
|
||||
+}
|
||||
+
|
||||
+static inline int gpio_direction_output(unsigned gpio, int value)
|
||||
+{
|
||||
+ return au1xxx_gpio_direction_output(gpio, value);
|
||||
+}
|
||||
+
|
||||
+static inline int gpio_get_value(unsigned gpio)
|
||||
+{
|
||||
+ return au1xxx_gpio_get_value(gpio);
|
||||
+}
|
||||
+
|
||||
+static inline void gpio_set_value(unsigned gpio, int value)
|
||||
+{
|
||||
+ au1xxx_gpio_set_value(gpio, value);
|
||||
+}
|
||||
+
|
||||
+static inline int gpio_to_irq(unsigned gpio)
|
||||
+{
|
||||
+ return gpio;
|
||||
+}
|
||||
+
|
||||
+static inline int irq_to_gpio(unsigned irq)
|
||||
+{
|
||||
+ return irq;
|
||||
+}
|
||||
+
|
||||
+/* For cansleep */
|
||||
+#include <asm-generic/gpio.h>
|
||||
+
|
||||
+#endif /* _AU1XXX_GPIO_H_ */
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
|
||||
index 764bf9f..4d1b8d2 100644
|
||||
--- a/arch/mips/au1000/mtx-1/Makefile
|
||||
+++ b/arch/mips/au1000/mtx-1/Makefile
|
||||
@@ -7,4 +7,4 @@
|
||||
# Makefile for 4G Systems MTX-1 board.
|
||||
#
|
||||
|
||||
-lib-y := init.o board_setup.o irqmap.o
|
||||
+lib-y := init.o board_setup.o irqmap.o platform.o
|
||||
|
|
@ -15,7 +15,7 @@ diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch
|
|||
@@ -8,3 +8,4 @@
|
||||
#
|
||||
|
||||
lib-y := init.o board_setup.o irqmap.o
|
||||
lib-y := init.o board_setup.o irqmap.o platform.o
|
||||
+obj-y := mtx-1_sysbtn.o
|
||||
diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c
|
||||
--- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100
|
||||
|
|
|
|||
|
|
@ -1,28 +0,0 @@
|
|||
diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
|
||||
--- linux-2.6.19.2/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2.new/drivers/leds/Kconfig 2007-03-02 13:50:28.000000000 +0100
|
||||
@@ -76,6 +76,13 @@
|
||||
This option enables support for the Soekris net4801 and net4826 error
|
||||
LED.
|
||||
|
||||
+config LEDS_MTX1
|
||||
+ tristate "LED Support for MTX-1 boards"
|
||||
+ depends on LEDS_CLASS && MIPS_MTX1
|
||||
+ help
|
||||
+ This option enables support for the MTX-1 power and status LED.
|
||||
+
|
||||
+
|
||||
comment "LED Triggers"
|
||||
|
||||
config LEDS_TRIGGERS
|
||||
diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
|
||||
--- linux-2.6.21.1/drivers/leds/Makefile 2007-04-27 23:49:26.000000000 +0200
|
||||
+++ linux-2.6.21.1.new/drivers/leds/Makefile 2007-05-24 23:39:18.000000000 +0200
|
||||
@@ -16,6 +16,7 @@
|
||||
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
|
||||
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
|
||||
obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
|
||||
+obj-$(CONFIG_LEDS_MTX1) += leds-mtx1.o
|
||||
|
||||
# LED Triggers
|
||||
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
--- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c 2007-07-24 18:42:21.031908123 +0200
|
||||
+++ linux-2.6.22.1/arch/mips/au1000/common/pci.c 2007-07-24 22:12:07.373162835 +0200
|
||||
@@ -74,6 +74,7 @@
|
||||
printk(KERN_ERR "Unable to ioremap pci space\n");
|
||||
return 1;
|
||||
}
|
||||
+ au1x_controller.io_map_base = virt_io_addr;
|
||||
|
||||
#ifdef CONFIG_DMA_NONCOHERENT
|
||||
{
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
--- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:57:35.000000000 +0200
|
||||
+++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:59:48.000000000 +0200
|
||||
@@ -54,7 +54,7 @@
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
-#ifdef CONFIG_USB_OHCI
|
||||
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
||||
// enable USB power switch
|
||||
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
|
||||
au_writel( 0x100000, GPIO2_OUTPUT );
|
||||
Loading…
Reference in New Issue