hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx:add support for E750A v4 

Qxwlan E750A v4 is based on Qualcomm QCA9344.

Specification:

 - 560/450/225 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 5G GHz (AR9344)
 - 2x 10/100 Mbps Ethernet (one port with PoE support)
 - 1x miniPCIe slot (USB 2.0 bus only)
 - 7x LED (6 driven by GPIO)
 - 1x button (reset)
 - 1x DC jack for main power input (9-48 V)
 - UART (J23) and LEDs (J2) headers on PCB

Flash instruction (using U-Boot CLI and tftp server):

 - Configure PC with static IP 192.168.1.10 and tftp server.
 - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
   server directory.
 - Connect PC with one of RJ45 ports, power up the board and press
   "enter" key to access U-Boot CLI.
 - Use the following command to update the device to OpenWrt: "run lfw".

Flash instruction (using U-Boot web-based recovery):

 - Configure PC with static IP 192.168.1.xxx(2-254)/24.
 - Connect PC with one of RJ45 ports, press the reset button, power up
   the board and keep button pressed for around 6-7 seconds, until LEDs
   start flashing.
 - Open your browser and enter 192.168.1.1, select "sysupgrade" image
   and click the upgrade button.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit ac03d51a3f)
openwrt-18.06
张鹏 2018-07-17 18:11:21 +08:00 committed by John Crispin
parent 21ad5fb1ea
commit 11a5128b98
11 changed files with 163 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -66,7 +66,8 @@ cpe830|\
cpe870|\
dr531|\
e600g-v2|\
e600gac-v2)
e600gac-v2|\
e750a-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"

1
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -26,6 +26,7 @@ get_status_led() {
e1700ac-v2|\
e558-v2|\
e600gac-v2|\
e750a-v4|\
eap120|\
minibox-v1|\
packet-squirrel|\

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -684,6 +684,9 @@ ar71xx_board_detect() {
*"E600GAC v2")
name="e600gac-v2"
;;
*"E750A v4")
name="e750a-v4"
;;
*"EAP120")
name="eap120"
tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -253,6 +253,7 @@ platform_check_image() {
e558-v2|\
e600g-v2|\
e600gac-v2|\
e750a-v4|\
ebr-2310-c1|\
ens202ext|\
epg5000|\

1
target/linux/ar71xx/config-4.9
View File

@ -103,6 +103,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_E2100L is not set
# CONFIG_ATH79_MACH_E558_V2 is not set
# CONFIG_ATH79_MACH_E600G_V2 is not set
# CONFIG_ATH79_MACH_E750A_V4 is not set
# CONFIG_ATH79_MACH_EAP120 is not set
# CONFIG_ATH79_MACH_EAP300V2 is not set
# CONFIG_ATH79_MACH_EAP7660D is not set

11
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -733,6 +733,17 @@ config ATH79_MACH_E600G_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_E750A_V4
bool "Qxwlan E750A v4 support"
select SOC_AR934X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_ESR900
bool "EnGenius ESR900 board support"
select SOC_QCA955X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o
obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o
obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o
obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o
obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o
obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o

122
target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c Normal file
View File

@ -0,0 +1,122 @@
/*
* Qxwlan E750A v4 board support
*
* Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define E750A_V4_GPIO_LED_SYS 14
#define E750A_V4_GPIO_LED_LAN 19
#define E750A_V4_GPIO_LED_WAN 18
#define E750A_V4_GPIO_LED_DS10 15
#define E750A_V4_GPIO_LED_DS20 20
#define E750A_V4_GPIO_LED_WLAN 21
#define E750A_V4_GPIO_BTN_RESET 12
#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */
#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL)
static struct gpio_led e750a_v4_leds_gpio[] __initdata = {
{
.name = "e750a-v4:green:system",
.gpio = E750A_V4_GPIO_LED_SYS,
.active_low = 1,
},
{
.name = "e750a-v4:green:lan",
.gpio = E750A_V4_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "e750a-v4:green:wan",
.gpio = E750A_V4_GPIO_LED_WAN,
.active_low = 1,
},
{
.name = "e750a-v4:green:wlan",
.gpio = E750A_V4_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "e750a-v4:green:ds10",
.gpio = E750A_V4_GPIO_LED_DS10,
.active_low = 1,
},
{
.name = "e750a-v4:green:ds20",
.gpio = E750A_V4_GPIO_LED_DS20,
.active_low = 1,
},
};
static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL,
.gpio = E750A_V4_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init e750a_v4_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio),
e750a_v4_leds_gpio);
ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL,
ARRAY_SIZE(e750a_v4_gpio_keys),
e750a_v4_gpio_keys);
ath79_register_mdio(1, 0x0);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_register_eth(1);
/* GMAC0 is connected to the PHY4 of the internal switch */
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(4);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_register_eth(0);
ath79_register_pci();
ath79_register_usb();
ath79_register_wmac(art, NULL);
}
MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4",
e750a_v4_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -108,6 +108,7 @@ enum ath79_mach_type {
ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */
ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */
ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */
ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */
ATH79_MACH_EAP120, /* TP-LINK EAP120 */
ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */
ATH79_MACH_EAP7660D, /* Senao EAP7660D */

1
target/linux/ar71xx/generic/config-default
View File

@ -76,6 +76,7 @@ CONFIG_ATH79_MACH_E1700AC_V2=y
CONFIG_ATH79_MACH_E2100L=y
CONFIG_ATH79_MACH_E558_V2=y
CONFIG_ATH79_MACH_E600G_V2=y
CONFIG_ATH79_MACH_E750A_V4=y
CONFIG_ATH79_MACH_EAP120=y
CONFIG_ATH79_MACH_EAP300V2=y
CONFIG_ATH79_MACH_EAP7660D=y

19
target/linux/ar71xx/image/generic.mk
View File

@ -392,6 +392,25 @@ define Device/e600gac-v2-8M
endef
TARGET_DEVICES += e600gac-v2-8M
define Device/e750a-v4-16M
DEVICE_TITLE := Qxwlan E750A v4 (16MB flash)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
BOARDNAME := E750A-V4
SUPPORTED_DEVICES := e750a-v4
IMAGE_SIZE := 15936k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += e750a-v4-16M
define Device/e750a-v4-8M
$(Device/e750a-v4-16M)
DEVICE_TITLE := Qxwlan E750A v4 (8MB flash)
IMAGE_SIZE := 7744k
endef
TARGET_DEVICES += e750a-v4-8M
define Device/ew-balin
DEVICE_TITLE := Embedded Wireless Balin Platform
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea