archs38: remove support for kernel 4.14

Kernel 5.4 is stable for about two months now and there is only one
patch anyway, so this is mostly upstream stuff. Therefore, it does
not look like we need to keep old 4.14 around any longer.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Adrian Schmutzler 2020-05-25 11:53:34 +02:00
parent 4bbc0e7357
commit 0efa8cb0a8
2 changed files with 0 additions and 239 deletions

View File

@ -1,208 +0,0 @@
# CONFIG_16KSTACKS is not set
CONFIG_ARC=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARC_BUILTIN_DTB_NAME=""
CONFIG_ARC_CACHE=y
CONFIG_ARC_CACHE_LINE_SHIFT=6
CONFIG_ARC_CACHE_PAGES=y
# CONFIG_ARC_CANT_LLSC is not set
CONFIG_ARC_CPU_HS=y
CONFIG_ARC_CURR_IN_REG=y
CONFIG_ARC_DBG=y
# CONFIG_ARC_DBG_TLB_PARANOIA is not set
CONFIG_ARC_DW2_UNWIND=y
# CONFIG_ARC_HAS_ACCL_REGS is not set
CONFIG_ARC_HAS_DCACHE=y
# CONFIG_ARC_HAS_DCCM is not set
CONFIG_ARC_HAS_DIV_REM=y
CONFIG_ARC_HAS_ICACHE=y
# CONFIG_ARC_HAS_ICCM is not set
CONFIG_ARC_HAS_LL64=y
CONFIG_ARC_HAS_LLSC=y
# CONFIG_ARC_HAS_PAE40 is not set
CONFIG_ARC_HAS_SWAPE=y
CONFIG_ARC_KVADDR_SIZE=256
CONFIG_ARC_MCIP=y
# CONFIG_ARC_METAWARE_HLINK is not set
CONFIG_ARC_MMU_V4=y
# CONFIG_ARC_PAGE_SIZE_16K is not set
# CONFIG_ARC_PAGE_SIZE_4K is not set
CONFIG_ARC_PAGE_SIZE_8K=y
CONFIG_ARC_PLAT_AXS10X=y
# CONFIG_ARC_PLAT_EZNPS is not set
# CONFIG_ARC_PLAT_TB10X is not set
# CONFIG_ARC_SMP_HALT_ON_RESET is not set
CONFIG_ARC_SOC_HSDK=y
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_AXS103=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLK_HSDK=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DTC=y
CONFIG_DWMAC_ANARION=y
# CONFIG_DWMAC_DWC_QOS_ETH is not set
CONFIG_DWMAC_GENERIC=y
CONFIG_DW_APB_ICTL=y
CONFIG_EXT4_FS=y
# CONFIG_EZNPS_GIC is not set
CONFIG_FIXED_PHY=y
CONFIG_FS_MBCACHE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC=y
# CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_WORK=y
# CONFIG_ISA_ARCOMPACT is not set
CONFIG_ISA_ARCV2=y
CONFIG_JBD2=y
CONFIG_KALLSYMS=y
CONFIG_KERNEL_GZIP=y
CONFIG_LIBFDT=y
CONFIG_LINUX_LINK_BASE=0x90000000
CONFIG_LINUX_RAM_BASE=0x80000000
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_DW=y
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_K3 is not set
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NATIONAL_PHY=y
# CONFIG_NET_CADENCE is not set
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_PADATA=y
# CONFIG_PCI_SYSCALL is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PPS=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_RATIONAL=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_HSDK=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SMP=y
CONFIG_SRCU=y
CONFIG_STACKTRACE=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_SWPHY=y
CONFIG_TASKS_RCU=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_SRCU=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB_SUPPORT=y
CONFIG_XPS=y

View File

@ -1,31 +0,0 @@
From 0031b9011cb2b2b1de4dbb4f9620303aec760db4 Mon Sep 17 00:00:00 2001
From: Alexey Brodkin <abrodkin@synopsys.com>
Date: Wed, 27 Jul 2016 11:33:14 +0300
Subject: [PATCH] stmmac: Disable frame filtering completely
For some [still unknown] reason in ARC SDP boards
DW GMAC doesn't enter promiscuous mode if eth0 gets
added to the br-lan interface before Ethernet PHY finishes
autonegotiation (PHY gets reset on DW GMAC start).
As a work-around we completely disable frame filtering
in GMAC hardware which gives us working bridge that consists
of eth0 and wlan0 (USB Wi-Fi dongle). I.e. we finally have
working "Dumb AP" setup made of ARC AXS10x boards.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -46,7 +46,7 @@
#define STMMAC_GET_ENTRY(x, size) ((x + 1) & (size - 1))
#undef FRAME_FILTER_DEBUG
-/* #define FRAME_FILTER_DEBUG */
+#define FRAME_FILTER_DEBUG
/* Extra statistic and debug information exposed by ethtool */
struct stmmac_extra_stats {