mirror of https://github.com/hak5/openwrt.git
kernel: backport some upstream at803x fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>lede-17.01
Felix Fietkau
parent
566de813c3
commit
06a21e12ee
|
|
@ -0,0 +1,43 @@
|
|||
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
|
||||
Date: Wed, 23 Mar 2016 00:44:40 +0300
|
||||
Subject: [PATCH] at803x: fix reset handling
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
The driver of course "knows" that the chip's reset signal is active low,
|
||||
so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however
|
||||
all this will only work iff the GPIO is specified as active-high in the
|
||||
device tree! I think both the driver and the device trees (if there are
|
||||
any -- I was unable to find them) need to be fixed in this case...
|
||||
|
||||
Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
|
||||
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
|
||||
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
||||
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||||
---
|
||||
|
||||
--- a/drivers/net/phy/at803x.c
|
||||
+++ b/drivers/net/phy/at803x.c
|
||||
@@ -250,7 +250,7 @@ static int at803x_probe(struct phy_devic
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
|
||||
+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpiod_reset))
|
||||
return PTR_ERR(gpiod_reset);
|
||||
|
||||
@@ -377,10 +377,10 @@ static void at803x_link_change_notify(st
|
||||
|
||||
at803x_context_save(phydev, &context);
|
||||
|
||||
- gpiod_set_value(priv->gpiod_reset, 0);
|
||||
- msleep(1);
|
||||
gpiod_set_value(priv->gpiod_reset, 1);
|
||||
msleep(1);
|
||||
+ gpiod_set_value(priv->gpiod_reset, 0);
|
||||
+ msleep(1);
|
||||
|
||||
at803x_context_restore(phydev, &context);
|
||||
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
From: Sebastian Frias <sf84@laposte.net>
|
||||
Date: Wed, 23 Mar 2016 11:49:09 +0100
|
||||
Subject: [PATCH] net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
|
||||
|
||||
This removes the dependency on GPIOLIB for non faulty PHYs.
|
||||
|
||||
Indeed, without this patch, if GPIOLIB is not selected
|
||||
devm_gpiod_get_optional() will return -ENOSYS and the driver probe
|
||||
call will fail, regardless of the actual PHY hardware.
|
||||
|
||||
Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035),
|
||||
only AT8030 presents the issues that commit 13a56b449325 ("net: phy:
|
||||
at803x: Add support for hardware reset") attempts to work-around by
|
||||
using a 'reset' GPIO line.
|
||||
|
||||
Hence, only AT8030 should depend on GPIOLIB operating properly.
|
||||
|
||||
Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
|
||||
|
||||
Signed-off-by: Sebastian Frias <sf84@laposte.net>
|
||||
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||||
---
|
||||
|
||||
--- a/drivers/net/phy/at803x.c
|
||||
+++ b/drivers/net/phy/at803x.c
|
||||
@@ -250,12 +250,16 @@ static int at803x_probe(struct phy_devic
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
+ if (phydev->drv->phy_id != ATH8030_PHY_ID)
|
||||
+ goto does_not_require_reset_workaround;
|
||||
+
|
||||
gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpiod_reset))
|
||||
return PTR_ERR(gpiod_reset);
|
||||
|
||||
priv->gpiod_reset = gpiod_reset;
|
||||
|
||||
+does_not_require_reset_workaround:
|
||||
phydev->priv = priv;
|
||||
|
||||
return 0;
|
||||
|
|
@ -0,0 +1,77 @@
|
|||
From: Timur Tabi <timur@codeaurora.org>
|
||||
Date: Tue, 26 Apr 2016 12:44:18 -0500
|
||||
Subject: [PATCH] net: phy: at803x: only the AT8030 needs a hardware reset on
|
||||
link change
|
||||
|
||||
Commit 13a56b44 ("at803x: Add support for hardware reset") added a
|
||||
work-around for a hardware bug on the AT8030. However, the work-around
|
||||
was being called for all 803x PHYs, even those that don't need it.
|
||||
Function at803x_link_change_notify() checks to make sure that it only
|
||||
resets the PHY on the 8030, but it makes more sense to not call that
|
||||
function at all if it isn't needed.
|
||||
|
||||
Signed-off-by: Timur Tabi <timur@codeaurora.org>
|
||||
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
|
||||
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||||
---
|
||||
|
||||
--- a/drivers/net/phy/at803x.c
|
||||
+++ b/drivers/net/phy/at803x.c
|
||||
@@ -374,27 +374,25 @@ static void at803x_link_change_notify(st
|
||||
* in the FIFO. In such cases, the FIFO enters an error mode it
|
||||
* cannot recover from by software.
|
||||
*/
|
||||
- if (phydev->drv->phy_id == ATH8030_PHY_ID) {
|
||||
- if (phydev->state == PHY_NOLINK) {
|
||||
- if (priv->gpiod_reset && !priv->phy_reset) {
|
||||
- struct at803x_context context;
|
||||
+ if (phydev->state == PHY_NOLINK) {
|
||||
+ if (priv->gpiod_reset && !priv->phy_reset) {
|
||||
+ struct at803x_context context;
|
||||
|
||||
- at803x_context_save(phydev, &context);
|
||||
+ at803x_context_save(phydev, &context);
|
||||
|
||||
- gpiod_set_value(priv->gpiod_reset, 1);
|
||||
- msleep(1);
|
||||
- gpiod_set_value(priv->gpiod_reset, 0);
|
||||
- msleep(1);
|
||||
+ gpiod_set_value(priv->gpiod_reset, 1);
|
||||
+ msleep(1);
|
||||
+ gpiod_set_value(priv->gpiod_reset, 0);
|
||||
+ msleep(1);
|
||||
|
||||
- at803x_context_restore(phydev, &context);
|
||||
+ at803x_context_restore(phydev, &context);
|
||||
|
||||
- dev_dbg(&phydev->dev, "%s(): phy was reset\n",
|
||||
- __func__);
|
||||
- priv->phy_reset = true;
|
||||
- }
|
||||
- } else {
|
||||
- priv->phy_reset = false;
|
||||
+ dev_dbg(&phydev->dev, "%s(): phy was reset\n",
|
||||
+ __func__);
|
||||
+ priv->phy_reset = true;
|
||||
}
|
||||
+ } else {
|
||||
+ priv->phy_reset = false;
|
||||
}
|
||||
if (pdata && pdata->fixup_rgmii_tx_delay &&
|
||||
phydev->speed != priv->prev_speed) {
|
||||
@@ -426,7 +424,6 @@ static struct phy_driver at803x_driver[]
|
||||
.phy_id_mask = AT803X_PHY_ID_MASK,
|
||||
.probe = at803x_probe,
|
||||
.config_init = at803x_config_init,
|
||||
- .link_change_notify = at803x_link_change_notify,
|
||||
.set_wol = at803x_set_wol,
|
||||
.get_wol = at803x_get_wol,
|
||||
.suspend = at803x_suspend,
|
||||
@@ -468,7 +465,6 @@ static struct phy_driver at803x_driver[]
|
||||
.phy_id_mask = AT803X_PHY_ID_MASK,
|
||||
.probe = at803x_probe,
|
||||
.config_init = at803x_config_init,
|
||||
- .link_change_notify = at803x_link_change_notify,
|
||||
.set_wol = at803x_set_wol,
|
||||
.get_wol = at803x_get_wol,
|
||||
.suspend = at803x_suspend,
|
||||
Loading…
Reference in New Issue