mirror of https://github.com/hak5/openwrt.git
mvebu: add support for GL.iNet GL-MV1000
This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB (W25Q128FWSIG) - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC (KLM8G1GETF-B041) - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC) - Button: 1x reset button,1x slide switch - LED: 3x greed LED - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) Update firmware instructions ============================ In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web. Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [Copied dts file to files-5.4] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>master
Li Zhang
Hauke Mehrtens
parent
cf22c4435e
commit
050c24f05c
|
|
@ -24,6 +24,9 @@ globalscale,espressobin-v7-emmc|\
|
|||
marvell,armada8040-mcbin)
|
||||
ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
|
||||
;;
|
||||
glinet,gl-mv1000)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1"
|
||||
;;
|
||||
linksys,caiman|\
|
||||
linksys,cobra|\
|
||||
linksys,shelby)
|
||||
|
|
|
|||
|
|
@ -14,7 +14,8 @@ case "$board" in
|
|||
globalscale,espressobin|\
|
||||
globalscale,espressobin-emmc|\
|
||||
globalscale,espressobin-v7|\
|
||||
globalscale,espressobin-v7-emmc)
|
||||
globalscale,espressobin-v7-emmc|\
|
||||
glinet,gl-mv1000)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
|
||||
;;
|
||||
marvell,armada-3720-db|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,165 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device Tree file for GL.iNet GL-MV1000
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "armada-372x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "GL.inet GL-MV1000";
|
||||
compatible = "glinet,gl-mv1000", "marvell,armada3720";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
|
||||
};
|
||||
|
||||
vcc_sd_reg1: regulator {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vcc_sd1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
|
||||
gpios-states = <0>;
|
||||
states = <1800000 0x1
|
||||
3300000 0x0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
reg = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <104000000>;
|
||||
m25p,fast-read;
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0 0xf0000>;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0Xf0000 0x8000>;
|
||||
};
|
||||
|
||||
factory: partition@f8000 {
|
||||
label = "factory";
|
||||
reg = <0xf8000 0x8000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
wp-inverted;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
|
||||
marvell,pad-type = "sd";
|
||||
no-1-8-v;
|
||||
vqmmc-supply = <&vcc_sd_reg1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
marvell,pad-type = "fixed-1-8v";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
switch0: switch0@1 {
|
||||
compatible = "marvell,mv88e6085";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports: ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "cpu";
|
||||
ethernet = <ð0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "wan";
|
||||
phy-handle = <&switch0phy0>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan0";
|
||||
phy-handle = <&switch0phy1>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
phy-handle = <&switch0phy2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch0phy0: switch0phy0@11 {
|
||||
reg = <0x11>;
|
||||
};
|
||||
switch0phy1: switch0phy1@12 {
|
||||
reg = <0x12>;
|
||||
};
|
||||
switch0phy2: switch0phy2@13 {
|
||||
reg = <0x13>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
mtd-mac-address = <&factory 0x0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,165 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Device Tree file for GL.iNet GL-MV1000
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "armada-372x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "GL.inet GL-MV1000";
|
||||
compatible = "glinet,gl-mv1000", "marvell,armada3720";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
|
||||
};
|
||||
|
||||
vcc_sd_reg1: regulator {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vcc_sd1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
|
||||
gpios-states = <0>;
|
||||
states = <1800000 0x1
|
||||
3300000 0x0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
reg = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <104000000>;
|
||||
m25p,fast-read;
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0 0xf0000>;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0Xf0000 0x8000>;
|
||||
};
|
||||
|
||||
factory: partition@f8000 {
|
||||
label = "factory";
|
||||
reg = <0xf8000 0x8000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
wp-inverted;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
|
||||
marvell,pad-type = "sd";
|
||||
no-1-8-v;
|
||||
vqmmc-supply = <&vcc_sd_reg1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
marvell,pad-type = "fixed-1-8v";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
switch0: switch0@1 {
|
||||
compatible = "marvell,mv88e6085";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports: ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "cpu";
|
||||
ethernet = <ð0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "wan";
|
||||
phy-handle = <&switch0phy0>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan0";
|
||||
phy-handle = <&switch0phy1>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
phy-handle = <&switch0phy2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch0phy0: switch0phy0@11 {
|
||||
reg = <0x11>;
|
||||
};
|
||||
switch0phy1: switch0phy1@12 {
|
||||
reg = <0x12>;
|
||||
};
|
||||
switch0phy2: switch0phy2@13 {
|
||||
reg = <0x13>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
mtd-mac-address = <&factory 0x0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
|
@ -69,3 +69,12 @@ define Device/methode_udpu
|
|||
BOOT_SCRIPT := udpu
|
||||
endef
|
||||
TARGET_DEVICES += methode_udpu
|
||||
|
||||
define Device/glinet_gl-mv1000
|
||||
$(call Device/Default-arm64)
|
||||
DEVICE_TITLE := GL.iNet GL-MV1000
|
||||
DEVICE_DTS := armada-gl-mv1000
|
||||
SUPPORTED_DEVICES := glinet,gl-mv1000
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-mv1000
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue