avr32: update to latest atmel sources

SVN-Revision: 11665
lede-17.01
Matteo Croce 2008-07-05 14:49:07 +00:00
parent ed3aeb2031
commit 03b9d260c7
4 changed files with 1601 additions and 1057 deletions

View File

@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
LINUX_VERSION:=2.6.25.9
LINUX_VERSION:=2.6.25.10
include $(INCLUDE_DIR)/target.mk

View File

@ -128,12 +128,14 @@ CONFIG_MTD_PHYSMAP_START=0x80000000
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
# CONFIG_NMI_DEBUGGING is not set
CONFIG_NO_HZ=y
CONFIG_NR_QUICK=2
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_PHYLIB=y
CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PLATFORM_AT32AP=y
# CONFIG_QSEMI_PHY is not set
CONFIG_QUICKLIST=y
# CONFIG_REALTEK_PHY is not set
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT32AP700X=m

File diff suppressed because it is too large Load Diff

View File

@ -1,43 +0,0 @@
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -77,6 +77,7 @@ struct atmel_mci {
struct clk *mck;
struct platform_device *pdev;
+ int pending_stop;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_root;
struct dentry *debugfs_regs;
@@ -866,6 +867,12 @@ static void atmci_tasklet_func(unsigned long priv)
data->bytes_xfered = data->blocks * data->blksz;
atmci_data_complete(host, data);
}
+ /* See if there is a pending STOP which can be sent */
+ if (host->pending_stop && mci_cmd_is_complete(host)) {
+ host->pending_stop = 0;
+ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
+ send_stop_cmd(host->mmc, mrq->data, 0);
+ }
}
static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
@@ -918,9 +925,16 @@ static void atmci_xfer_complete(struct dma_request *_req)
* drivers) or when interrupts are disabled for a long time.
*/
mci_set_dma_complete(host);
- if (data->stop && mci_cmd_is_complete(host)
- && !mci_set_stop_sent_is_completed(host))
- send_stop_cmd(host->mmc, data, 0);
+
+ if (data->stop) {
+ if (!mci_cmd_is_complete(host)) {
+ /* Just remember a STOP must be sent */
+ host->pending_stop = 1;
+ } else if (!mci_set_stop_sent_is_completed(host)) {
+ send_stop_cmd(host->mmc, data, 0);
+ host->pending_stop = 0;
+ }
+ }
/*
* Regardless of what the documentation says, we have to wait