hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath10k: increase bmi timeout to fix OTP on qca99xx boards and add bmi identification through pre-cal file 

Backporting upstream patches.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh, rename patches]
openwrt-18.06
Pavel Kubelun 2017-06-01 17:13:04 +03:00 committed by Felix Fietkau
parent d80d1b6c42
commit 025cb640cd
7 changed files with 196 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch Normal file
View File

@ -0,0 +1,31 @@
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 31 May 2017 14:21:19 +0300
Subject: [PATCH] ath10k: increase BMI timeout
When testing a 9888 chipset NIC, I notice it often takes
almost 2 seconds, and then many times OTP fails, probably due
to the two-second timeout.
[ 2269.841842] ath10k_pci 0000:05:00.0: bmi cmd took: 1984 jiffies (HZ: 1000), rv: 0
[ 2273.608185] ath10k_pci 0000:05:00.0: bmi cmd took: 1986 jiffies (HZ: 1000), rv: 0
[ 2277.294732] ath10k_pci 0000:05:00.0: bmi cmd took: 1989 jiffies (HZ: 1000), rv: 0
So, increase the BMI timeout to 3 seconds.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath10k/bmi.h
+++ b/drivers/net/wireless/ath/ath10k/bmi.h
@@ -187,8 +187,8 @@ struct bmi_target_info {
u32 type;
};
-/* in msec */
-#define BMI_COMMUNICATION_TIMEOUT_HZ (2 * HZ)
+/* in jiffies */
+#define BMI_COMMUNICATION_TIMEOUT_HZ (3 * HZ)
#define BMI_CE_NUM_TO_TARG 0
#define BMI_CE_NUM_TO_HOST 1

74
package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch Normal file
View File

@ -0,0 +1,74 @@
From: Ben Greear <greearb@candelatech.com>
Date: Wed, 31 May 2017 14:21:21 +0300
Subject: [PATCH] ath10k: log when longer bmi cmds happen
This lets one have a clue that maybe timeouts are happening
when we just aren't waiting long enough.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -101,7 +101,8 @@ static int ath10k_pci_init_irq(struct at
static int ath10k_pci_deinit_irq(struct ath10k *ar);
static int ath10k_pci_request_irq(struct ath10k *ar);
static void ath10k_pci_free_irq(struct ath10k *ar);
-static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
+static int ath10k_pci_bmi_wait(struct ath10k *ar,
+ struct ath10k_ce_pipe *tx_pipe,
struct ath10k_ce_pipe *rx_pipe,
struct bmi_xfer *xfer);
static int ath10k_pci_qca99x0_chip_reset(struct ath10k *ar);
@@ -1843,7 +1844,7 @@ int ath10k_pci_hif_exchange_bmi_msg(stru
if (ret)
goto err_resp;
- ret = ath10k_pci_bmi_wait(ce_tx, ce_rx, &xfer);
+ ret = ath10k_pci_bmi_wait(ar, ce_tx, ce_rx, &xfer);
if (ret) {
u32 unused_buffer;
unsigned int unused_nbytes;
@@ -1910,23 +1911,37 @@ static void ath10k_pci_bmi_recv_data(str
xfer->rx_done = true;
}
-static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
+static int ath10k_pci_bmi_wait(struct ath10k *ar,
+ struct ath10k_ce_pipe *tx_pipe,
struct ath10k_ce_pipe *rx_pipe,
struct bmi_xfer *xfer)
{
unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
+ unsigned long started = jiffies;
+ unsigned long dur;
+ int ret;
while (time_before_eq(jiffies, timeout)) {
ath10k_pci_bmi_send_done(tx_pipe);
ath10k_pci_bmi_recv_data(rx_pipe);
- if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp))
- return 0;
+ if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp)) {
+ ret = 0;
+ goto out;
+ }
schedule();
}
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+
+out:
+ dur = jiffies - started;
+ if (dur > HZ)
+ ath10k_dbg(ar, ATH10K_DBG_BMI,
+ "bmi cmd took %lu jiffies hz %d ret %d\n",
+ dur, HZ, ret);
+ return ret;
}
/*

80
package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch Normal file
View File

@ -0,0 +1,80 @@
From: Anilkumar Kolli <akolli@qti.qualcomm.com>
Date: Wed, 31 May 2017 14:21:27 +0300
Subject: [PATCH] ath10k: add BMI parameters to fix calibration from
DT/pre-cal
QCA99X0, QCA9888, QCA9984 supports calibration data in
either OTP or DT/pre-cal file. Current ath10k supports
Calibration data from OTP only.
If caldata is loaded from DT/pre-cal file, fetching board id
and applying calibration parameters like tx power gets failed.
error log:
[ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2
[ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2)
This patch adds calibration data support from DT/pre-cal
file. Below parameters are used to get board id and
applying calibration parameters from cal data.
EEPROM[OTP] FLASH[DT/pre-cal file]
Cal param 0x700 0x10000
Board id 0x10 0x8000
Tested on QCA9888 with pre-cal file.
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath10k/bmi.h
+++ b/drivers/net/wireless/ath/ath10k/bmi.h
@@ -83,6 +83,8 @@ enum bmi_cmd_id {
#define BMI_NVRAM_SEG_NAME_SZ 16
#define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10
+#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000
+#define BMI_PARAM_FLASH_SECTION_ALL 0x10000
#define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00
#define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -657,7 +657,7 @@ static int ath10k_core_get_board_id_from
{
u32 result, address;
u8 board_id, chip_id;
- int ret;
+ int ret, bmi_board_id_param;
address = ar->hw_params.patch_load_addr;
@@ -681,8 +681,13 @@ static int ath10k_core_get_board_id_from
return ret;
}
- ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID,
- &result);
+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
+ bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID;
+ else
+ bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID;
+
+ ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp for board id check: %d\n",
ret);
@@ -810,6 +815,11 @@ static int ath10k_download_and_run_otp(s
return ret;
}
+ /* As of now pre-cal is valid for 10_4 variants */
+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
+ bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL;
+
ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp (%d)\n", ret);

2
package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
--- a/drivers/net/wireless/ath/ath10k/core.c --- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2319,6 +2319,16 @@ int ath10k_core_register(struct ath10k * @@ -2329,6 +2329,16 @@ int ath10k_core_register(struct ath10k *
ar->chip_id = chip_id; ar->chip_id = chip_id;
queue_work(ar->workqueue, &ar->register_work); queue_work(ar->workqueue, &ar->register_work);

2
package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch
View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/core.c --- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -686,7 +686,7 @@ @@ -691,7 +691,7 @@ static int ath10k_core_get_board_id_from
if (ret) { if (ret) {
ath10k_err(ar, "could not execute otp for board id check: %d\n", ath10k_err(ar, "could not execute otp for board id check: %d\n",
ret); ret);

6
package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch
View File

@ -1,11 +1,11 @@
--- a/drivers/net/wireless/ath/ath10k/htt.h 2016-12-12 16:03:58.491019030 +0100 --- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h 2016-12-12 15:39:45.242298155 +0100 +++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -199,7 +199,7 @@ enum htt_rx_ring_flags { @@ -199,7 +199,7 @@ enum htt_rx_ring_flags {
}; };
#define HTT_RX_RING_SIZE_MIN 128 #define HTT_RX_RING_SIZE_MIN 128
+#define HTT_RX_RING_SIZE_MAX 512
-#define HTT_RX_RING_SIZE_MAX 2048 -#define HTT_RX_RING_SIZE_MAX 2048
+#define HTT_RX_RING_SIZE_MAX 512
struct htt_rx_ring_setup_ring { struct htt_rx_ring_setup_ring {
__le32 fw_idx_shadow_reg_paddr; __le32 fw_idx_shadow_reg_paddr;

12
package/kernel/mac80211/patches/960-0011-ath10k-limit-pci-buffer-size.patch
View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/pci.c 2016-12-12 16:29:42.310053558 +0100 --- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c 2016-12-12 16:34:46.667203800 +0100 +++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -127,7 +127,7 @@ static struct ce_attr host_ce_config_wla @@ -128,7 +128,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS, .flags = CE_ATTR_FLAGS,
.src_nentries = 0, .src_nentries = 0,
.src_sz_max = 2048, .src_sz_max = 2048,
@ -9,7 +9,7 @@
.recv_cb = ath10k_pci_htt_htc_rx_cb, .recv_cb = ath10k_pci_htt_htc_rx_cb,
}, },
@@ -136,7 +136,7 @@ static struct ce_attr host_ce_config_wla @@ -137,7 +137,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS, .flags = CE_ATTR_FLAGS,
.src_nentries = 0, .src_nentries = 0,
.src_sz_max = 2048, .src_sz_max = 2048,
@ -18,7 +18,7 @@
.recv_cb = ath10k_pci_htc_rx_cb, .recv_cb = ath10k_pci_htc_rx_cb,
}, },
@@ -163,7 +163,7 @@ static struct ce_attr host_ce_config_wla @@ -164,7 +164,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS, .flags = CE_ATTR_FLAGS,
.src_nentries = 0, .src_nentries = 0,
.src_sz_max = 512, .src_sz_max = 512,
@ -27,7 +27,7 @@
.recv_cb = ath10k_pci_htt_rx_cb, .recv_cb = ath10k_pci_htt_rx_cb,
}, },
@@ -188,7 +188,7 @@ static struct ce_attr host_ce_config_wla @@ -189,7 +189,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS, .flags = CE_ATTR_FLAGS,
.src_nentries = 0, .src_nentries = 0,
.src_sz_max = 2048, .src_sz_max = 2048,