openwrt/target/linux/ramips/dts/PBR-M1.dts

183 lines
2.7 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7621.dtsi"
/ {
compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
model = "PBR-M1";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus: palmbus@1E000000 {
i2c: i2c@900 {
status = "okay";
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "pbr-m1:blue:power";
gpios = <&gpio0 31 1>;
};
sys {
label = "pbr-m1:blue:sys";
gpios = <&gpio1 0 1>;
};
internet {
label = "pbr-m1:blue:internet";
gpios = <&gpio0 29 1>;
};
wlan2g {
label = "pbr-m1:blue:wlan2g";
gpios = <&gpio1 1 1>;
};
wlan5g {
label = "pbr-m1:blue:wlan5g";
gpios = <&gpio0 28 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 1>;
linux,code = <0x198>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb2 {
gpio-export,name = "power_usb2";
gpio-export,output = <1>;
gpios = <&gpio0 22 0>;
};
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
gpios = <&gpio0 25 0>;
};
power_sata {
gpio-export,name = "power_sata";
gpio-export,output = <1>;
gpios = <&gpio0 27 0>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&gpio0 26 1>;
};
};
&sdhci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
};
&xhci {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
mediatek,5ghz = <0>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "jtag", "mdio";
ralink,function = "gpio";
};
};
};