mirror of https://github.com/hak5/openwrt.git
49 lines
1.6 KiB
Diff
49 lines
1.6 KiB
Diff
|
Index: linux-2.6.32.9/drivers/pcmcia/yenta_socket.c
|
||
|
===================================================================
|
||
|
--- linux-2.6.32.9.orig/drivers/pcmcia/yenta_socket.c 2010-03-12 09:43:45.000000000 +0100
|
||
|
+++ linux-2.6.32.9/drivers/pcmcia/yenta_socket.c 2010-03-12 10:05:33.000000000 +0100
|
||
|
@@ -866,6 +866,8 @@
|
||
|
* Probe for usable interrupts using the force
|
||
|
* register to generate bogus card status events.
|
||
|
*/
|
||
|
+#ifndef CONFIG_BCM47XX
|
||
|
+ /* WRT54G3G does not like this */
|
||
|
cb_writel(socket, CB_SOCKET_EVENT, -1);
|
||
|
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
|
||
|
exca_writeb(socket, I365_CSCINT, 0);
|
||
|
@@ -880,6 +882,7 @@
|
||
|
}
|
||
|
cb_writel(socket, CB_SOCKET_MASK, 0);
|
||
|
exca_writeb(socket, I365_CSCINT, 0);
|
||
|
+#endif
|
||
|
|
||
|
mask = probe_irq_mask(val) & 0xffff;
|
||
|
|
||
|
@@ -960,6 +963,10 @@
|
||
|
else
|
||
|
socket->socket.irq_mask = 0;
|
||
|
|
||
|
+ /* irq mask probing is broken for the WRT54G3G */
|
||
|
+ if (socket->socket.irq_mask == 0)
|
||
|
+ socket->socket.irq_mask = 0x6f8;
|
||
|
+
|
||
|
dev_printk(KERN_INFO, &socket->dev->dev,
|
||
|
"ISA IRQ mask 0x%04x, PCI irq %d\n",
|
||
|
socket->socket.irq_mask, socket->cb_irq);
|
||
|
@@ -1198,6 +1205,15 @@
|
||
|
dev_printk(KERN_INFO, &dev->dev,
|
||
|
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
|
||
|
|
||
|
+ /* Generate an interrupt on card insert/remove */
|
||
|
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
|
||
|
+
|
||
|
+ /* Set up Multifunction Routing Status Register */
|
||
|
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
|
||
|
+
|
||
|
+ /* Switch interrupts to parallelized */
|
||
|
+ config_writeb(socket, 0x92, 0x64);
|
||
|
+
|
||
|
yenta_fixup_parent_bridge(dev->subordinate);
|
||
|
|
||
|
/* Register it with the pcmcia layer.. */
|