openwrt/package/mac80211/patches/300-pending_work.patch

--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -203,7 +203,7 @@ static void ar9002_hw_iqcalibrate(struct
 			i);
 
 		ath_dbg(common, ATH_DBG_CALIBRATE,
-			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			"Original: Chn %d iq_corr_meas = 0x%08x\n",
 			i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -226,7 +226,7 @@ static void ar9003_hw_iqcalibrate(struct
 			i);
 
 		ath_dbg(common, ATH_DBG_CALIBRATE,
-			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			"Original: Chn %d iq_corr_meas = 0x%08x\n",
 			i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -808,7 +808,8 @@ void ath9k_htc_ani_work(struct work_stru
 	}
 
 	/* Verify whether we must check ANI */
-	if ((timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
+	if (ah->config.enable_ani &&
+	    (timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
 		aniflag = true;
 		common->ani.checkani_timer = timestamp;
 	}
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -504,7 +504,7 @@ static int ath9k_hw_post_init(struct ath
 		return ecode;
 	}
 
-	if (!AR_SREV_9100(ah) && !AR_SREV_9340(ah)) {
+	if (ah->config.enable_ani) {
 		ath9k_hw_ani_setup(ah);
 		ath9k_hw_ani_init(ah);
 	}
@@ -610,6 +610,10 @@ static int __ath9k_hw_init(struct ath_hw
 	if (!AR_SREV_9300_20_OR_LATER(ah))
 		ah->ani_function &= ~ATH9K_ANI_MRC_CCK;
 
+	/* disable ANI for 9340 */
+	if (AR_SREV_9340(ah))
+		ah->config.enable_ani = false;
+
 	ath9k_hw_init_mode_regs(ah);
 
 	if (!ah->is_pciexpress)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -118,7 +118,7 @@ void ath9k_ps_restore(struct ath_softc *
 	if (--sc->ps_usecount != 0)
 		goto unlock;
 
-	if (sc->ps_idle)
+	if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
 		mode = ATH9K_PM_FULL_SLEEP;
 	else if (sc->ps_enabled &&
 		 !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
@@ -286,7 +286,7 @@ static bool ath_complete_reset(struct at
 			ath_start_ani(common);
 	}
 
-	if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
+	if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
 		struct ath_hw_antcomb_conf div_ant_conf;
 		u8 lna_conf;
 
@@ -332,7 +332,8 @@ static int ath_reset_internal(struct ath
 		hchan = ah->curchan;
 	}
 
-	if (fastcc && !ath9k_hw_check_alive(ah))
+	if (fastcc && (ah->chip_fullsleep ||
+	    !ath9k_hw_check_alive(ah)))
 		fastcc = false;
 
 	if (!ath_prepare_reset(sc, retry_tx, flush))
@@ -561,7 +562,6 @@ void ath_ani_calibrate(unsigned long dat
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
 		longcal = true;
-		ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 		common->ani.longcal_timer = timestamp;
 	}
 
@@ -569,8 +569,6 @@ void ath_ani_calibrate(unsigned long dat
 	if (!common->ani.caldone) {
 		if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 			shortcal = true;
-			ath_dbg(common, ATH_DBG_ANI,
-				"shortcal @%lu\n", jiffies);
 			common->ani.shortcal_timer = timestamp;
 			common->ani.resetcal_timer = timestamp;
 		}
@@ -584,8 +582,9 @@ void ath_ani_calibrate(unsigned long dat
 	}
 
 	/* Verify whether we must check ANI */
-	if ((timestamp - common->ani.checkani_timer) >=
-	     ah->config.ani_poll_interval) {
+	if (sc->sc_ah->config.enable_ani
+	    && (timestamp - common->ani.checkani_timer) >=
+	    ah->config.ani_poll_interval) {
 		aniflag = true;
 		common->ani.checkani_timer = timestamp;
 	}
@@ -605,6 +604,11 @@ void ath_ani_calibrate(unsigned long dat
 						ah->rxchainmask, longcal);
 	}
 
+	ath_dbg(common, ATH_DBG_ANI,
+		"Calibration @%lu finished: %s %s %s, caldone: %s\n", jiffies,
+		longcal ? "long" : "", shortcal ? "short" : "",
+		aniflag ? "ani" : "", common->ani.caldone ? "true" : "false");
+
 	ath9k_ps_restore(sc);
 
 set_timer:
@@ -886,82 +890,6 @@ chip_reset:
 #undef SCHED_INTR
 }
 
-static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ieee80211_channel *channel = hw->conf.channel;
-	int r;
-
-	ath9k_ps_wakeup(sc);
-	spin_lock_bh(&sc->sc_pcu_lock);
-	atomic_set(&ah->intr_ref_cnt, -1);
-
-	ath9k_hw_configpcipowersave(ah, false);
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
-
-	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (r) {
-		ath_err(common,
-			"Unable to reset channel (%u MHz), reset status %d\n",
-			channel->center_freq, r);
-	}
-
-	ath_complete_reset(sc, true);
-
-	/* Enable LED */
-	ath9k_hw_cfg_output(ah, ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-
-	spin_unlock_bh(&sc->sc_pcu_lock);
-
-	ath9k_ps_restore(sc);
-}
-
-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ieee80211_channel *channel = hw->conf.channel;
-	int r;
-
-	ath9k_ps_wakeup(sc);
-
-	ath_cancel_work(sc);
-
-	spin_lock_bh(&sc->sc_pcu_lock);
-
-	/*
-	 * Keep the LED on when the radio is disabled
-	 * during idle unassociated state.
-	 */
-	if (!sc->ps_idle) {
-		ath9k_hw_set_gpio(ah, ah->led_pin, 1);
-		ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
-	}
-
-	ath_prepare_reset(sc, false, true);
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
-	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (r) {
-		ath_err(ath9k_hw_common(sc->sc_ah),
-			"Unable to reset channel (%u MHz), reset status %d\n",
-			channel->center_freq, r);
-	}
-
-	ath9k_hw_phy_disable(ah);
-
-	ath9k_hw_configpcipowersave(ah, true);
-
-	spin_unlock_bh(&sc->sc_pcu_lock);
-	ath9k_ps_restore(sc);
-}
-
 static int ath_reset(struct ath_softc *sc, bool retry_tx)
 {
 	int r;
@@ -1097,6 +1025,9 @@ static int ath9k_start(struct ieee80211_
 	 * and then setup of the interrupt mask.
 	 */
 	spin_lock_bh(&sc->sc_pcu_lock);
+
+	atomic_set(&ah->intr_ref_cnt, -1);
+
 	r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (r) {
 		ath_err(common,
@@ -1138,6 +1069,18 @@ static int ath9k_start(struct ieee80211_
 		goto mutex_unlock;
 	}
 
+	if (ah->led_pin >= 0) {
+		ath9k_hw_cfg_output(ah, ah->led_pin,
+				    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+		ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+	}
+
+	/*
+	 * Reset key cache to sane defaults (all entries cleared) instead of
+	 * semi-random values after suspend/resume.
+	 */
+	ath9k_cmn_init_crypto(sc->sc_ah);
+
 	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@@ -1183,6 +1126,13 @@ static void ath9k_tx(struct ieee80211_hw
 		}
 	}
 
+	/*
+	 * Cannot tx while the hardware is in full sleep, it first needs a full
+	 * chip reset to recover from that
+	 */
+	if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP))
+		goto exit;
+
 	if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
 		/*
 		 * We are using PS-Poll and mac80211 can request TX while in
@@ -1229,6 +1179,7 @@ static void ath9k_stop(struct ieee80211_
 	struct ath_softc *sc = hw->priv;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
+	bool prev_idle;
 
 	mutex_lock(&sc->mutex);
 
@@ -1259,35 +1210,45 @@ static void ath9k_stop(struct ieee80211_
 	 * before setting the invalid flag. */
 	ath9k_hw_disable_interrupts(ah);
 
-	if (!(sc->sc_flags & SC_OP_INVALID)) {
-		ath_drain_all_txq(sc, false);
-		ath_stoprecv(sc);
-		ath9k_hw_phy_disable(ah);
-	} else
-		sc->rx.rxlink = NULL;
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
+	/* we can now sync irq and kill any running tasklets, since we already
+	 * disabled interrupts and not holding a spin lock */
+	synchronize_irq(sc->irq);
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
+
+	prev_idle = sc->ps_idle;
+	sc->ps_idle = true;
+
+	spin_lock_bh(&sc->sc_pcu_lock);
+
+	if (ah->led_pin >= 0) {
+		ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+		ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+	}
+
+	ath_prepare_reset(sc, false, true);
 
 	if (sc->rx.frag) {
 		dev_kfree_skb_any(sc->rx.frag);
 		sc->rx.frag = NULL;
 	}
 
-	/* disable HAL and put h/w to sleep */
-	ath9k_hw_disable(ah);
+	if (!ah->curchan)
+		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
 
-	spin_unlock_bh(&sc->sc_pcu_lock);
+	ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+	ath9k_hw_phy_disable(ah);
 
-	/* we can now sync irq and kill any running tasklets, since we already
-	 * disabled interrupts and not holding a spin lock */
-	synchronize_irq(sc->irq);
-	tasklet_kill(&sc->intr_tq);
-	tasklet_kill(&sc->bcon_tasklet);
+	ath9k_hw_configpcipowersave(ah, true);
 
-	ath9k_ps_restore(sc);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
-	sc->ps_idle = true;
-	ath_radio_disable(sc, hw);
+	ath9k_ps_restore(sc);
 
 	sc->sc_flags |= SC_OP_INVALID;
+	sc->ps_idle = prev_idle;
 
 	mutex_unlock(&sc->mutex);
 
@@ -1627,8 +1588,8 @@ static int ath9k_config(struct ieee80211
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_conf *conf = &hw->conf;
-	bool disable_radio = false;
 
+	ath9k_ps_wakeup(sc);
 	mutex_lock(&sc->mutex);
 
 	/*
@@ -1639,13 +1600,8 @@ static int ath9k_config(struct ieee80211
 	 */
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
 		sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
-		if (!sc->ps_idle) {
-			ath_radio_enable(sc, hw);
-			ath_dbg(common, ATH_DBG_CONFIG,
-				"not-idle: enabling radio\n");
-		} else {
-			disable_radio = true;
-		}
+		if (sc->ps_idle)
+			ath_cancel_work(sc);
 	}
 
 	/*
@@ -1678,7 +1634,6 @@ static int ath9k_config(struct ieee80211
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
-		struct ath9k_channel old_chan;
 		int pos = curchan->hw_value;
 		int old_pos = -1;
 		unsigned long flags;
@@ -1704,11 +1659,8 @@ static int ath9k_config(struct ieee80211
 		 * Preserve the current channel values, before updating
 		 * the same channel
 		 */
-		if (old_pos == pos) {
-			memcpy(&old_chan, &sc->sc_ah->channels[pos],
-				sizeof(struct ath9k_channel));
-			ah->curchan = &old_chan;
-		}
+		if (ah->curchan && (old_pos == pos))
+			ath9k_hw_getnf(ah, ah->curchan);
 
 		ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
 					  curchan, conf->channel_type);
@@ -1752,18 +1704,12 @@ static int ath9k_config(struct ieee80211
 		ath_dbg(common, ATH_DBG_CONFIG,
 			"Set power: %d\n", conf->power_level);
 		sc->config.txpowlimit = 2 * conf->power_level;
-		ath9k_ps_wakeup(sc);
 		ath9k_cmn_update_txpow(ah, sc->curtxpow,
 				       sc->config.txpowlimit, &sc->curtxpow);
-		ath9k_ps_restore(sc);
-	}
-
-	if (disable_radio) {
-		ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
-		ath_radio_disable(sc, hw);
 	}
 
 	mutex_unlock(&sc->mutex);
+	ath9k_ps_restore(sc);
 
 	return 0;
 }
@@ -2331,9 +2277,6 @@ static void ath9k_flush(struct ieee80211
 		return;
 	}
 
-	if (drop)
-		timeout = 1;
-
 	for (j = 0; j < timeout; j++) {
 		bool npend = false;
 
@@ -2351,21 +2294,22 @@ static void ath9k_flush(struct ieee80211
 		}
 
 		if (!npend)
-		    goto out;
+		    break;
 	}
 
-	ath9k_ps_wakeup(sc);
-	spin_lock_bh(&sc->sc_pcu_lock);
-	drain_txq = ath_drain_all_txq(sc, false);
-	spin_unlock_bh(&sc->sc_pcu_lock);
+	if (drop) {
+		ath9k_ps_wakeup(sc);
+		spin_lock_bh(&sc->sc_pcu_lock);
+		drain_txq = ath_drain_all_txq(sc, false);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 
-	if (!drain_txq)
-		ath_reset(sc, false);
+		if (!drain_txq)
+			ath_reset(sc, false);
 
-	ath9k_ps_restore(sc);
-	ieee80211_wake_queues(hw);
+		ath9k_ps_restore(sc);
+		ieee80211_wake_queues(hw);
+	}
 
-out:
 	ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
 	mutex_unlock(&sc->mutex);
 }
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -307,12 +307,11 @@ static int ath_pci_suspend(struct device
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_softc *sc = hw->priv;
 
-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
 	/* The device has to be moved to FULLSLEEP forcibly.
 	 * Otherwise the chip never moved to full sleep,
 	 * when no interface is up.
 	 */
+	ath9k_hw_disable(sc->sc_ah);
 	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
 
 	return 0;
@@ -334,22 +333,6 @@ static int ath_pci_resume(struct device 
 	if ((val & 0x0000ff00) != 0)
 		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
-	ath9k_ps_wakeup(sc);
-	/* Enable LED */
-	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-
-	  /*
-	   * Reset key cache to sane defaults (all entries cleared) instead of
-	   * semi-random values after suspend/resume.
-	   */
-	ath9k_cmn_init_crypto(sc->sc_ah);
-	ath9k_ps_restore(sc);
-
-	sc->ps_idle = true;
-	ath_radio_disable(sc, hw);
-
 	return 0;
 }
 
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1954,7 +1954,7 @@ static void ath_tx_complete(struct ath_s
 		skb_pull(skb, padsize);
 	}
 
-	if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
+	if ((sc->ps_flags & PS_WAIT_FOR_TX_ACK) && !txq->axq_depth) {
 		sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
 		ath_dbg(common, ATH_DBG_PS,
 			"Going back to sleep after having received TX status (0x%lx)\n",
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2785,9 +2785,11 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
  *	TX status to the socket error queue when requested with the
  *	socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
+	NL80211_FEATURE_HT_IBSS		= 1 << 1,
 };
 
 /**
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1149,6 +1149,7 @@ struct cfg80211_ibss_params {
 	u8 *ssid;
 	u8 *bssid;
 	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
 	u8 *ie;
 	u8 ssid_len, ie_len;
 	u16 beacon_interval;
@@ -3270,6 +3271,16 @@ void cfg80211_report_obss_beacon(struct 
 				 const u8 *frame, size_t len,
 				 int freq, gfp_t gfp);
 
+/*
+ * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
+ * @wiphy: the wiphy
+ * @chan: main channel
+ * @channel_type: HT mode
+ */
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -185,6 +185,10 @@ static void ieee80211_send_addba_resp(st
 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_WDS)
+		memcpy(mgmt->bssid, da, ETH_ALEN);
 
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 					  IEEE80211_STYPE_ACTION);
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -55,6 +55,8 @@
  * @ampdu_action function will be called with the action
  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
+ * Note that the sta can get destroyed before the BA tear down is
+ * complete.
  */
 
 static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
@@ -79,10 +81,13 @@ static void ieee80211_send_addba_request
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+	    sdata->vif.type == NL80211_IFTYPE_WDS)
 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
 
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 					  IEEE80211_STYPE_ACTION);
@@ -319,6 +324,38 @@ ieee80211_wake_queue_agg(struct ieee8021
 	__release(agg_queue);
 }
 
+/*
+ * splice packets from the STA's pending to the local pending,
+ * requires a call to ieee80211_agg_splice_finish later
+ */
+static void __acquires(agg_queue)
+ieee80211_agg_splice_packets(struct ieee80211_local *local,
+			     struct tid_ampdu_tx *tid_tx, u16 tid)
+{
+	int queue = ieee80211_ac_from_tid(tid);
+	unsigned long flags;
+
+	ieee80211_stop_queue_agg(local, tid);
+
+	if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
+			  " from the pending queue\n", tid))
+		return;
+
+	if (!skb_queue_empty(&tid_tx->pending)) {
+		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+		/* copy over remaining packets */
+		skb_queue_splice_tail_init(&tid_tx->pending,
+					   &local->pending[queue]);
+		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+	}
+}
+
+static void __releases(agg_queue)
+ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
+{
+	ieee80211_wake_queue_agg(local, tid);
+}
+
 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 {
 	struct tid_ampdu_tx *tid_tx;
@@ -330,19 +367,17 @@ void ieee80211_tx_ba_session_handle_star
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	/*
-	 * While we're asking the driver about the aggregation,
-	 * stop the AC queue so that we don't have to worry
-	 * about frames that came in while we were doing that,
-	 * which would require us to put them to the AC pending
-	 * afterwards which just makes the code more complex.
+	 * Start queuing up packets for this aggregation session.
+	 * We're going to release them once the driver is OK with
+	 * that.
 	 */
-	ieee80211_stop_queue_agg(local, tid);
-
 	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
 
 	/*
-	 * make sure no packets are being processed to get
-	 * valid starting sequence number
+	 * Make sure no packets are being processed. This ensures that
+	 * we have a valid starting sequence number and that in-flight
+	 * packets have been flushed out and no packets for this TID
+	 * will go into the driver during the ampdu_action call.
 	 */
 	synchronize_net();
 
@@ -356,10 +391,11 @@ void ieee80211_tx_ba_session_handle_star
 					" tid %d\n", tid);
 #endif
 		spin_lock_bh(&sta->lock);
+		ieee80211_agg_splice_packets(local, tid_tx, tid);
 		ieee80211_assign_tid_tx(sta, tid, NULL);
+		ieee80211_agg_splice_finish(local, tid);
 		spin_unlock_bh(&sta->lock);
 
-		ieee80211_wake_queue_agg(local, tid);
 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,40))
 		kfree_rcu(tid_tx, rcu_head);
 #else
@@ -368,9 +404,6 @@ void ieee80211_tx_ba_session_handle_star
 		return;
 	}
 
-	/* we can take packets again now */
-	ieee80211_wake_queue_agg(local, tid);
-
 	/* activate the timer for the recipient's addBA response */
 	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -437,7 +470,9 @@ int ieee80211_start_tx_ba_session(struct
 	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
 	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
 	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-	    sdata->vif.type != NL80211_IFTYPE_AP)
+	    sdata->vif.type != NL80211_IFTYPE_AP &&
+	    sdata->vif.type != NL80211_IFTYPE_WDS &&
+	    sdata->vif.type != NL80211_IFTYPE_ADHOC)
 		return -EINVAL;
 
 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
@@ -448,6 +483,27 @@ int ieee80211_start_tx_ba_session(struct
 		return -EINVAL;
 	}
 
+	/*
+	 * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
+	 * member of an IBSS, and has no other existing Block Ack agreement
+	 * with the recipient STA, then the initiating STA shall transmit a
+	 * Probe Request frame to the recipient STA and shall not transmit an
+	 * ADDBA Request frame unless it receives a Probe Response frame
+	 * from the recipient within dot11ADDBAFailureTimeout.
+	 *
+	 * The probe request mechanism for ADDBA is currently not implemented,
+	 * but we only build up Block Ack session with HT STAs. This information
+	 * is set when we receive a bss info from a probe response or a beacon.
+	 */
+	if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+	    !sta->sta.ht_cap.ht_supported) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+		printk(KERN_DEBUG "BA request denied - IBSS STA %pM"
+		       "does not advertise HT support\n", pubsta->addr);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+		return -EINVAL;
+	}
+
 	spin_lock_bh(&sta->lock);
 
 	/* we have tried too many times, receiver does not want A-MPDU */
@@ -508,38 +564,6 @@ int ieee80211_start_tx_ba_session(struct
 }
 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
 
-/*
- * splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish later
- */
-static void __acquires(agg_queue)
-ieee80211_agg_splice_packets(struct ieee80211_local *local,
-			     struct tid_ampdu_tx *tid_tx, u16 tid)
-{
-	int queue = ieee80211_ac_from_tid(tid);
-	unsigned long flags;
-
-	ieee80211_stop_queue_agg(local, tid);
-
-	if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
-			  " from the pending queue\n", tid))
-		return;
-
-	if (!skb_queue_empty(&tid_tx->pending)) {
-		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
-		/* copy over remaining packets */
-		skb_queue_splice_tail_init(&tid_tx->pending,
-					   &local->pending[queue]);
-		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-	}
-}
-
-static void __releases(agg_queue)
-ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
-{
-	ieee80211_wake_queue_agg(local, tid);
-}
-
 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 					 struct sta_info *sta, u16 tid)
 {
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -63,11 +63,11 @@ static ssize_t sta_flags_read(struct fil
 	test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
 
 	int res = scnprintf(buf, sizeof(buf),
-			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
 			    TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
 			    TEST(PS_DRIVER), TEST(AUTHORIZED),
 			    TEST(SHORT_PREAMBLE),
-			    TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
+			    TEST(WME), TEST(CLEAR_PS_FILT),
 			    TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
 			    TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
 			    TEST(TDLS_PEER_AUTH));
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -47,7 +47,9 @@ void ieee80211_apply_htcap_overrides(str
 	int i;
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION) {
-		WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION);
+		/* AP interfaces call this code when adding new stations,
+		 * so just silently ignore non station interfaces.
+		 */
 		return;
 	}
 
@@ -282,6 +284,8 @@ void ieee80211_send_delba(struct ieee802
 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
 
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 					  IEEE80211_STYPE_ACTION);
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -77,6 +77,7 @@ static void __ieee80211_sta_join_ibss(st
 	struct cfg80211_bss *bss;
 	u32 bss_change;
 	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
+	enum nl80211_channel_type channel_type;
 
 	lockdep_assert_held(&ifibss->mtx);
 
@@ -105,8 +106,16 @@ static void __ieee80211_sta_join_ibss(st
 
 	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
-	local->oper_channel = chan;
-	WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
+	channel_type = ifibss->channel_type;
+	if (channel_type > NL80211_CHAN_HT20 &&
+	    !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
+		channel_type = NL80211_CHAN_HT20;
+	if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
+		/* can only fail due to HT40+/- mismatch */
+		channel_type = NL80211_CHAN_HT20;
+		WARN_ON(!ieee80211_set_channel_type(local, sdata,
+						    NL80211_CHAN_HT20));
+	}
 	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
 	sband = local->hw.wiphy->bands[chan->band];
@@ -172,6 +181,19 @@ static void __ieee80211_sta_join_ibss(st
 		memcpy(skb_put(skb, ifibss->ie_len),
 		       ifibss->ie, ifibss->ie_len);
 
+	/* add HT capability and information IEs */
+	if (channel_type && sband->ht_cap.ht_supported) {
+		pos = skb_put(skb, 4 +
+				   sizeof(struct ieee80211_ht_cap) +
+				   sizeof(struct ieee80211_ht_info));
+		pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
+						sband->ht_cap.cap);
+		pos = ieee80211_ie_build_ht_info(pos,
+						 &sband->ht_cap,
+						 chan,
+						 channel_type);
+	}
+
 	if (local->hw.queues >= 4) {
 		pos = skb_put(skb, 9);
 		*pos++ = WLAN_EID_VENDOR_SPECIFIC;
@@ -195,6 +217,7 @@ static void __ieee80211_sta_join_ibss(st
 	bss_change |= BSS_CHANGED_BEACON;
 	bss_change |= BSS_CHANGED_BEACON_ENABLED;
 	bss_change |= BSS_CHANGED_BASIC_RATES;
+	bss_change |= BSS_CHANGED_HT;
 	bss_change |= BSS_CHANGED_IBSS;
 	sdata->vif.bss_conf.ibss_joined = true;
 	ieee80211_bss_info_change_notify(sdata, bss_change);
@@ -268,6 +291,8 @@ static void ieee80211_rx_bss_info(struct
 	u64 beacon_timestamp, rx_timestamp;
 	u32 supp_rates = 0;
 	enum ieee80211_band band = rx_status->band;
+	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+	bool rates_updated = false;
 
 	if (elems->ds_params && elems->ds_params_len == 1)
 		freq = ieee80211_channel_to_frequency(elems->ds_params[0],
@@ -307,7 +332,7 @@ static void ieee80211_rx_bss_info(struct
 						prev_rates,
 						sta->sta.supp_rates[band]);
 #endif
-					rate_control_rate_init(sta);
+					rates_updated = true;
 				}
 			} else
 				sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
@@ -318,6 +343,39 @@ static void ieee80211_rx_bss_info(struct
 		if (sta && elems->wmm_info)
 			set_sta_flag(sta, WLAN_STA_WME);
 
+		if (sta && elems->ht_info_elem && elems->ht_cap_elem &&
+		    sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) {
+			/* we both use HT */
+			struct ieee80211_sta_ht_cap sta_ht_cap_new;
+			enum nl80211_channel_type channel_type =
+				ieee80211_ht_info_to_channel_type(
+							elems->ht_info_elem);
+
+			ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+							  elems->ht_cap_elem,
+							  &sta_ht_cap_new);
+
+			/*
+			 * fall back to HT20 if we don't use or use
+			 * the other extension channel
+			 */
+			if ((channel_type == NL80211_CHAN_HT40MINUS ||
+			     channel_type == NL80211_CHAN_HT40PLUS) &&
+			    channel_type != sdata->u.ibss.channel_type)
+				sta_ht_cap_new.cap &=
+					~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+			if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new,
+				   sizeof(sta_ht_cap_new))) {
+				memcpy(&sta->sta.ht_cap, &sta_ht_cap_new,
+				       sizeof(sta_ht_cap_new));
+				rates_updated = true;
+			}
+		}
+
+		if (sta && rates_updated)
+			rate_control_rate_init(sta);
+
 		rcu_read_unlock();
 	}
 
@@ -896,12 +954,18 @@ int ieee80211_ibss_join(struct ieee80211
 			struct cfg80211_ibss_params *params)
 {
 	struct sk_buff *skb;
+	u32 changed = 0;
 
 	skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
-			    36 /* bitrates */ +
-			    34 /* SSID */ +
-			    3  /* DS params */ +
-			    4  /* IBSS params */ +
+			    sizeof(struct ieee80211_hdr_3addr) +
+			    12 /* struct ieee80211_mgmt.u.beacon */ +
+			    2 + IEEE80211_MAX_SSID_LEN /* max SSID */ +
+			    2 + 8 /* max Supported Rates */ +
+			    3 /* max DS params */ +
+			    4 /* IBSS params */ +
+			    2 + (IEEE80211_MAX_SUPP_RATES - 8) +
+			    2 + sizeof(struct ieee80211_ht_cap) +
+			    2 + sizeof(struct ieee80211_ht_info) +
 			    params->ie_len);
 	if (!skb)
 		return -ENOMEM;
@@ -922,13 +986,15 @@ int ieee80211_ibss_join(struct ieee80211
 	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
 
 	sdata->u.ibss.channel = params->channel;
+	sdata->u.ibss.channel_type = params->channel_type;
 	sdata->u.ibss.fixed_channel = params->channel_fixed;
 
 	/* fix ourselves to that channel now already */
 	if (params->channel_fixed) {
 		sdata->local->oper_channel = params->channel;
-		WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
-						    NL80211_CHAN_NO_HT));
+		if (!ieee80211_set_channel_type(sdata->local, sdata,
+					       params->channel_type))
+			return -EINVAL;
 	}
 
 	if (params->ie) {
@@ -951,6 +1017,23 @@ int ieee80211_ibss_join(struct ieee80211
 	ieee80211_recalc_idle(sdata->local);
 	mutex_unlock(&sdata->local->mtx);
 
+	/*
+	 * 802.11n-2009 9.13.3.1: In an IBSS, the HT Protection field is
+	 * reserved, but an HT STA shall protect HT transmissions as though
+	 * the HT Protection field were set to non-HT mixed mode.
+	 *
+	 * In an IBSS, the RIFS Mode field of the HT Operation element is
+	 * also reserved, but an HT STA shall operate as though this field
+	 * were set to 1.
+	 */
+
+	sdata->vif.bss_conf.ht_operation_mode |=
+		  IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED
+		| IEEE80211_HT_PARAM_RIFS_MODE;
+
+	changed |= BSS_CHANGED_HT;
+	ieee80211_bss_info_change_notify(sdata, changed);
+
 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 
 	return 0;
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -474,6 +474,7 @@ struct ieee80211_if_ibss {
 	u8 ssid_len, ie_len;
 	u8 *ie;
 	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
 
 	unsigned long ibss_join_req;
 	/* probe response/beacon for IBSS */
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -178,7 +178,6 @@ static int ieee80211_do_open(struct net_
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta;
 	u32 changed = 0;
 	int res;
 	u32 hw_reconf_flags = 0;
@@ -309,27 +308,6 @@ static int ieee80211_do_open(struct net_
 
 	set_bit(SDATA_STATE_RUNNING, &sdata->state);
 
-	if (sdata->vif.type == NL80211_IFTYPE_WDS) {
-		/* Create STA entry for the WDS peer */
-		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
-				     GFP_KERNEL);
-		if (!sta) {
-			res = -ENOMEM;
-			goto err_del_interface;
-		}
-
-		/* no atomic bitop required since STA is not live yet */
-		set_sta_flag(sta, WLAN_STA_AUTHORIZED);
-
-		res = sta_info_insert(sta);
-		if (res) {
-			/* STA has been freed */
-			goto err_del_interface;
-		}
-
-		rate_control_rate_init(sta);
-	}
-
 	/*
 	 * set_multicast_list will be invoked by the networking core
 	 * which will check whether any increments here were done in
@@ -356,8 +334,7 @@ static int ieee80211_do_open(struct net_
 	netif_tx_start_all_queues(dev);
 
 	return 0;
- err_del_interface:
-	drv_remove_interface(local, sdata);
+
  err_stop:
 	if (!local->open_count)
 		drv_stop(local);
@@ -719,6 +696,70 @@ static void ieee80211_if_setup(struct ne
 	dev->destructor = free_netdev;
 }
 
+static void ieee80211_wds_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
+					 struct sk_buff *skb)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_rx_status *rx_status;
+	struct ieee802_11_elems elems;
+	struct ieee80211_mgmt *mgmt;
+	struct sta_info *sta;
+	size_t baselen;
+	u32 rates = 0;
+	u16 stype;
+	bool new = false;
+	enum ieee80211_band band = local->hw.conf.channel->band;
+	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+
+	rx_status = IEEE80211_SKB_RXCB(skb);
+	mgmt = (struct ieee80211_mgmt *) skb->data;
+	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
+
+	if (stype != IEEE80211_STYPE_BEACON)
+		return;
+
+	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+	if (baselen > skb->len)
+		return;
+
+	ieee802_11_parse_elems(mgmt->u.probe_resp.variable,
+			       skb->len - baselen, &elems);
+
+	rates = ieee80211_sta_get_rates(local, &elems, band);
+
+	rcu_read_lock();
+
+	sta = sta_info_get(sdata, sdata->u.wds.remote_addr);
+
+	if (!sta) {
+		rcu_read_unlock();
+		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+				     GFP_KERNEL);
+		if (!sta)
+			return;
+
+		new = true;
+	}
+
+	sta->last_rx = jiffies;
+	sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+
+	if (elems.ht_cap_elem)
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+				elems.ht_cap_elem, &sta->sta.ht_cap);
+
+	if (elems.wmm_param)
+		set_sta_flag(sta, WLAN_STA_WME);
+
+	if (new) {
+		set_sta_flag(sta, WLAN_STA_AUTHORIZED);
+		rate_control_rate_init(sta);
+		sta_info_insert_rcu(sta);
+	}
+
+	rcu_read_unlock();
+}
+
 static void ieee80211_iface_work(struct work_struct *work)
 {
 	struct ieee80211_sub_if_data *sdata =
@@ -823,6 +864,9 @@ static void ieee80211_iface_work(struct 
 				break;
 			ieee80211_mesh_rx_queued_mgmt(sdata, skb);
 			break;
+		case NL80211_IFTYPE_WDS:
+			ieee80211_wds_rx_queued_mgmt(sdata, skb);
+			break;
 		default:
 			WARN(1, "frame for unexpected interface type");
 			break;
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -574,7 +574,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(
 			WIPHY_FLAG_OFFCHAN_TX |
 			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
-	wiphy->features = NL80211_FEATURE_SK_TX_STATUS;
+	wiphy->features = NL80211_FEATURE_SK_TX_STATUS |
+			  NL80211_FEATURE_HT_IBSS;
 
 	if (!ops->set_key)
 		wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2237,7 +2237,9 @@ ieee80211_rx_h_action(struct ieee80211_r
 		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
 		    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
 		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-		    sdata->vif.type != NL80211_IFTYPE_AP)
+		    sdata->vif.type != NL80211_IFTYPE_AP &&
+		    sdata->vif.type != NL80211_IFTYPE_WDS &&
+		    sdata->vif.type != NL80211_IFTYPE_ADHOC)
 			break;
 
 		/* verify action_code is present */
@@ -2452,13 +2454,14 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
 
 	if (!ieee80211_vif_is_mesh(&sdata->vif) &&
 	    sdata->vif.type != NL80211_IFTYPE_ADHOC &&
-	    sdata->vif.type != NL80211_IFTYPE_STATION)
+	    sdata->vif.type != NL80211_IFTYPE_STATION &&
+	    sdata->vif.type != NL80211_IFTYPE_WDS)
 		return RX_DROP_MONITOR;
 
 	switch (stype) {
 	case cpu_to_le16(IEEE80211_STYPE_BEACON):
 	case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
-		/* process for all: mesh, mlme, ibss */
+		/* process for all: mesh, mlme, ibss, wds */
 		break;
 	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
@@ -2796,19 +2799,32 @@ static int prepare_for_handlers(struct i
 				return 0;
 		} else if (!ieee80211_bssid_match(bssid,
 					sdata->vif.addr)) {
+			/*
+			 * Accept public action frames even when the
+			 * BSSID doesn't match, this is used for P2P
+			 * and location updates. Note that mac80211
+			 * itself never looks at these frames.
+			 */
 			if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
-			    !ieee80211_is_beacon(hdr->frame_control) &&
-			    !(ieee80211_is_action(hdr->frame_control) &&
-			      sdata->vif.p2p))
+			    ieee80211_is_public_action(hdr, skb->len))
+				return 1;
+			if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
+			    !ieee80211_is_beacon(hdr->frame_control))
 				return 0;
 			status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
 		}
 		break;
 	case NL80211_IFTYPE_WDS:
-		if (bssid || !ieee80211_is_data(hdr->frame_control))
-			return 0;
 		if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
 			return 0;
+
+		if (ieee80211_is_data(hdr->frame_control) ||
+		    ieee80211_is_action(hdr->frame_control)) {
+			if (compare_ether_addr(sdata->vif.addr, hdr->addr1))
+				return 0;
+		} else if (!ieee80211_is_beacon(hdr->frame_control))
+			return 0;
+
 		break;
 	default:
 		/* should never get here */
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -31,7 +31,6 @@
  * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
  *	frames.
  * @WLAN_STA_WME: Station is a QoS-STA.
- * @WLAN_STA_WDS: Station is one of our WDS peers.
  * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  *	IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
  *	frame to this station is transmitted.
@@ -60,7 +59,6 @@ enum ieee80211_sta_info_flags {
 	WLAN_STA_AUTHORIZED,
 	WLAN_STA_SHORT_PREAMBLE,
 	WLAN_STA_WME,
-	WLAN_STA_WDS,
 	WLAN_STA_CLEAR_PS_FILT,
 	WLAN_STA_MFP,
 	WLAN_STA_BLOCK_BA,
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1612,6 +1612,11 @@ u8 *ieee80211_ie_build_ht_info(u8 *pos,
 	}
 	if (ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
 		ht_info->ht_param |= IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
+
+	/*
+	 * Note: According to 802.11n-2009 9.13.3.1, HT Protection field and
+	 * RIFS Mode are reserved in IBSS mode, therefore keep them at 0
+	 */
 	ht_info->operation_mode = 0x0000;
 	ht_info->stbc_param = 0x0000;
 
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -6,6 +6,7 @@
  * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include "core.h"
 
@@ -44,9 +45,9 @@ rdev_freq_to_chan(struct cfg80211_regist
 	return chan;
 }
 
-static bool can_beacon_sec_chan(struct wiphy *wiphy,
-				struct ieee80211_channel *chan,
-				enum nl80211_channel_type channel_type)
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+				  struct ieee80211_channel *chan,
+				  enum nl80211_channel_type channel_type)
 {
 	struct ieee80211_channel *sec_chan;
 	int diff;
@@ -75,6 +76,7 @@ static bool can_beacon_sec_chan(struct w
 
 	return true;
 }
+EXPORT_SYMBOL(cfg80211_can_beacon_sec_chan);
 
 int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 		      struct wireless_dev *wdev, int freq,
@@ -109,8 +111,8 @@ int cfg80211_set_freq(struct cfg80211_re
 		switch (channel_type) {
 		case NL80211_CHAN_HT40PLUS:
 		case NL80211_CHAN_HT40MINUS:
-			if (!can_beacon_sec_chan(&rdev->wiphy, chan,
-						 channel_type)) {
+			if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, chan,
+							  channel_type)) {
 				printk(KERN_DEBUG
 				       "cfg80211: Secondary channel not "
 				       "allowed to initiate communication\n");
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4684,13 +4684,41 @@ static int nl80211_join_ibss(struct sk_b
 		ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
 	}
 
-	ibss.channel = ieee80211_get_channel(wiphy,
-		nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+	if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
+		enum nl80211_channel_type channel_type;
+
+		channel_type = nla_get_u32(
+				info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
+		if (channel_type != NL80211_CHAN_NO_HT &&
+		    channel_type != NL80211_CHAN_HT20 &&
+		    channel_type != NL80211_CHAN_HT40MINUS &&
+		    channel_type != NL80211_CHAN_HT40PLUS)
+			return -EINVAL;
+
+		if (channel_type != NL80211_CHAN_NO_HT &&
+		    !(wiphy->features & NL80211_FEATURE_HT_IBSS))
+			return -EINVAL;
+
+		ibss.channel_type = channel_type;
+	} else {
+		ibss.channel_type = NL80211_CHAN_NO_HT;
+	}
+
+	ibss.channel = rdev_freq_to_chan(rdev,
+		nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]),
+		ibss.channel_type);
 	if (!ibss.channel ||
 	    ibss.channel->flags & IEEE80211_CHAN_NO_IBSS ||
 	    ibss.channel->flags & IEEE80211_CHAN_DISABLED)
 		return -EINVAL;
 
+	/* Both channels should be able to initiate communication */
+	if ((ibss.channel_type == NL80211_CHAN_HT40PLUS ||
+	     ibss.channel_type == NL80211_CHAN_HT40MINUS) &&
+	    !cfg80211_can_beacon_sec_chan(&rdev->wiphy, ibss.channel,
+					  ibss.channel_type))
+		return -EINVAL;
+
 	ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
 	ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
 
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1695,6 +1695,23 @@ static inline bool ieee80211_is_robust_m
 }
 
 /**
+ * ieee80211_is_public_action - check if frame is a public action frame
+ * @hdr: the frame
+ * @len: length of the frame
+ */
+static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
+					      size_t len)
+{
+	struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+	if (len < 25)
+		return false;
+	if (!ieee80211_is_action(hdr->frame_control))
+		return false;
+	return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
+}
+
+/**
  * ieee80211_fhss_chan_to_freq - get channel frequency
  * @channel: the FHSS channel
  *
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1332,8 +1332,11 @@ static int invoke_tx_handlers(struct iee
 	if (!(tx->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL))
 		CALL_TXH(ieee80211_tx_h_rate_ctrl);
 
-	if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION))
+	if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) {
+		__skb_queue_tail(&tx->skbs, tx->skb);
+		tx->skb = NULL;
 		goto txh_done;
+	}
 
 	CALL_TXH(ieee80211_tx_h_michael_mic_add);
 	CALL_TXH(ieee80211_tx_h_sequence);
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -851,6 +851,7 @@ static int __must_check __sta_info_destr
 	struct ieee80211_sub_if_data *sdata;
 	unsigned long flags;
 	int ret, i, ac;
+	struct tid_ampdu_tx *tid_tx;
 
 	might_sleep();
 
@@ -949,6 +950,30 @@ static int __must_check __sta_info_destr
 	}
 #endif
 
+	/* There could be some memory leaks because of ampdu tx pending queue
+	 * not being freed before destroying the station info.
+	 *
+	 * Make sure that such queues are purged before freeing the station
+	 * info.
+	 * TODO: We have to somehow postpone the full destruction
+	 * until the aggregation stop completes. Refer
+	 * http://thread.gmane.org/gmane.linux.kernel.wireless.general/81936
+	 */
+	for (i = 0; i < STA_TID_NUM; i++) {
+		if (!sta->ampdu_mlme.tid_tx[i])
+			continue;
+		tid_tx = sta->ampdu_mlme.tid_tx[i];
+		if (skb_queue_len(&tid_tx->pending)) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+			wiphy_debug(local->hw.wiphy, "TX A-MPDU  purging %d "
+				"packets for tid=%d\n",
+				skb_queue_len(&tid_tx->pending), i);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+			__skb_queue_purge(&tid_tx->pending);
+		}
+		kfree_rcu(tid_tx, rcu_head);
+	}
+
 	__sta_info_free(local, sta);
 
 	return 0;
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -402,6 +402,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
 	ah->noise = ath9k_hw_getchan_noise(ah, chan);
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_getnf);
 
 void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
 				  struct ath9k_channel *chan)