openwrt/target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch

From ae2b5bb6570481b50a7175c64176b82da0a81836 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 20 Jan 2013 22:05:30 +0100
Subject: [PATCH 10/14] MIPS: ralink: adds Kbuild files

Add the Kbuild symbols and Makefiles needed to actually build the ralink code
from this series

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4899/
---
 arch/mips/Kbuild.platforms    |    1 +
 arch/mips/Kconfig             |   17 +++++++++++++++++
 arch/mips/ralink/Kconfig      |   32 ++++++++++++++++++++++++++++++++
 arch/mips/ralink/Makefile     |   15 +++++++++++++++
 arch/mips/ralink/Platform     |   10 ++++++++++
 arch/mips/ralink/dts/Makefile |    1 +
 6 files changed, 76 insertions(+)
 create mode 100644 arch/mips/ralink/Kconfig
 create mode 100644 arch/mips/ralink/Makefile
 create mode 100644 arch/mips/ralink/Platform
 create mode 100644 arch/mips/ralink/dts/Makefile

--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -22,6 +22,7 @@ platforms += pmc-sierra
 platforms += pnx833x
 platforms += pnx8550
 platforms += powertv
+platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
 platforms += sgi-ip27
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -434,6 +434,22 @@ config POWERTV
 	help
 	  This enables support for the Cisco PowerTV Platform.
 
+config RALINK
+	bool "Ralink based machines"
+	select CEVT_R4K
+	select CSRC_R4K
+	select BOOT_RAW
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select USE_OF
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select FW_ARC
@@ -846,6 +862,7 @@ source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
+source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
--- /dev/null
+++ b/arch/mips/ralink/Kconfig
@@ -0,0 +1,32 @@
+if RALINK
+
+choice
+	prompt "Ralink SoC selection"
+	default SOC_RT305X
+	help
+	  Select Ralink MIPS SoC type.
+
+	config SOC_RT305X
+		bool "RT305x"
+		select USB_ARCH_HAS_HCD
+		select USB_ARCH_HAS_OHCI
+		select USB_ARCH_HAS_EHCI
+
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_RT_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_RT_NONE
+		bool "None"
+
+	config DTB_RT305X_EVAL
+		bool "RT305x eval kit"
+		depends on SOC_RT305X
+
+endchoice
+
+endif
--- /dev/null
+++ b/arch/mips/ralink/Makefile
@@ -0,0 +1,15 @@
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.#
+# Makefile for the Ralink common stuff
+#
+# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+
+obj-y := prom.o of.o reset.o clk.o irq.o
+
+obj-$(CONFIG_SOC_RT305X) += rt305x.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-y += dts/
--- /dev/null
+++ b/arch/mips/ralink/Platform
@@ -0,0 +1,10 @@
+#
+# Ralink SoC common stuff
+#
+core-$(CONFIG_RALINK)		+= arch/mips/ralink/
+cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
+
+#
+# Ralink RT305x
+#
+load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
--- /dev/null
+++ b/arch/mips/ralink/dts/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o