openwrt/package/kernel/mac80211/patches/653-0048-rtl8xxxu-Implement-rtl8188eu_power_off.patch

From 34e65b6f310234cf3e3629bd3d896a4f84df71f4 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri, 26 Aug 2016 16:09:00 -0400
Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_power_off()

This makes the driver match the poweroff sequence of the vendor driver
and allows the firmware to reload correctly upon rmmod/insmod.
However the device still doesn't receive data upon reloading.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 136 ++++++++++++++++++++-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h  |   2 +
 2 files changed, 137 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
@@ -1191,6 +1191,71 @@ exit:
 	return ret;
 }
 
+static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* 0x04[12:11] = 01 enable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(7);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	return 0;
+}
+
+static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
+
+	retry = 100;
+	retval = -EBUSY;
+	/*
+	 * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
+	 */
+	do {
+		val32 = rtl8xxxu_read32(priv, 0x05f8);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+	return retval;
+}
+
 static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
 {
 	u16 val16;
@@ -1221,6 +1286,75 @@ exit:
 	return ret;
 }
 
+void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	rtl8188eu_active_to_lps(priv);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	/* 32K_CTRL looks to be very 8188e specific */
+	val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
+
+	rtl8188eu_active_to_emu(priv);
+	rtl8188eu_emu_to_disabled(priv);
+
+	/* Reset MCU IO Wrapper */
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(3);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(3);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	/* Vendor driver refers to GPIO_IN */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
+	/* Vendor driver refers to GPIO_OUT */
+	rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
+	rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
+
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
+
+	/*
+	 * Set LNA, TRSW, EX_PA Pin to output mode
+	 * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
+	 */
+	rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
+
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
+
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+}
+
 static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
 {
 	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
@@ -1265,7 +1399,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
 	.parse_efuse = rtl8188eu_parse_efuse,
 	.load_firmware = rtl8188eu_load_firmware,
 	.power_on = rtl8188eu_power_on,
-	.power_off = rtl8xxxu_power_off,
+	.power_off = rtl8188eu_power_off,
 	.reset_8051 = rtl8188eu_reset_8051,
 	.llt_init = rtl8xxxu_init_llt_table,
 	.init_phy_bb = rtl8188eu_init_phy_bb,
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -418,6 +418,8 @@
 #define REG_MBIST_START			0x0174
 #define REG_MBIST_DONE			0x0178
 #define REG_MBIST_FAIL			0x017c
+/* 8188EU */
+#define REG_32K_CTRL			0x0194
 #define REG_C2HEVT_MSG_NORMAL		0x01a0
 /* 8192EU/8723BU/8812 */
 #define REG_C2HEVT_CMD_ID_8723B		0x01ae