openwrt/target/linux/bcm53xx/patches-3.14/002-mtd-spi-nor-from-3.18.patch

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -611,6 +611,7 @@ const struct spi_device_id spi_nor_ids[]
 	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
 	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
 	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
+	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
 
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
 	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
@@ -623,7 +624,6 @@ const struct spi_device_id spi_nor_ids[]
 	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
@@ -671,11 +671,6 @@ static const struct spi_device_id *spi_n
 	return ERR_PTR(-ENODEV);
 }
 
-static const struct spi_device_id *jedec_probe(struct spi_nor *nor)
-{
-	return nor->read_id(nor);
-}
-
 static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, u_char *buf)
 {
@@ -920,7 +915,6 @@ int spi_nor_scan(struct spi_nor *nor, co
 			enum read_mode mode)
 {
 	struct flash_info		*info;
-	struct flash_platform_data	*data;
 	struct device *dev = nor->dev;
 	struct mtd_info *mtd = nor->mtd;
 	struct device_node *np = dev->of_node;
@@ -931,34 +925,12 @@ int spi_nor_scan(struct spi_nor *nor, co
 	if (ret)
 		return ret;
 
-	/* Platform data helps sort out which chip type we have, as
-	 * well as how this board partitions it.  If we don't have
-	 * a chip ID, try the JEDEC id commands; they'll work for most
-	 * newer chips, even if we don't recognize the particular chip.
-	 */
-	data = dev_get_platdata(dev);
-	if (data && data->type) {
-		const struct spi_device_id *plat_id;
-
-		for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) {
-			plat_id = &spi_nor_ids[i];
-			if (strcmp(data->type, plat_id->name))
-				continue;
-			break;
-		}
-
-		if (i < ARRAY_SIZE(spi_nor_ids) - 1)
-			id = plat_id;
-		else
-			dev_warn(dev, "unrecognized id %s\n", data->type);
-	}
-
 	info = (void *)id->driver_data;
 
 	if (info->jedec_id) {
 		const struct spi_device_id *jid;
 
-		jid = jedec_probe(nor);
+		jid = nor->read_id(nor);
 		if (IS_ERR(jid)) {
 			return PTR_ERR(jid);
 		} else if (jid != id) {
@@ -990,11 +962,8 @@ int spi_nor_scan(struct spi_nor *nor, co
 		write_sr(nor, 0);
 	}
 
-	if (data && data->name)
-		mtd->name = data->name;
-	else
+	if (!mtd->name)
 		mtd->name = dev_name(dev);
-
 	mtd->type = MTD_NORFLASH;
 	mtd->writesize = 1;
 	mtd->flags = MTD_CAP_NORFLASH;
@@ -1018,6 +987,7 @@ int spi_nor_scan(struct spi_nor *nor, co
 	    nor->wait_till_ready == spi_nor_wait_till_ready)
 		nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
 
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
 	/* prefer "small sector" erase if possible */
 	if (info->flags & SECT_4K) {
 		nor->erase_opcode = SPINOR_OP_BE_4K;
@@ -1025,7 +995,9 @@ int spi_nor_scan(struct spi_nor *nor, co
 	} else if (info->flags & SECT_4K_PMC) {
 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
 		mtd->erasesize = 4096;
-	} else {
+	} else
+#endif
+	{
 		nor->erase_opcode = SPINOR_OP_SE;
 		mtd->erasesize = info->sector_size;
 	}
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -7,6 +7,20 @@ menuconfig MTD_SPI_NOR
 
 if MTD_SPI_NOR
 
+config MTD_SPI_NOR_USE_4K_SECTORS
+	bool "Use small 4096 B erase sectors"
+	default y
+	help
+	  Many flash memories support erasing small (4096 B) sectors. Depending
+	  on the usage this feature may provide performance gain in comparison
+	  to erasing whole blocks (32/64 KiB).
+	  Changing a small part of the flash's contents is usually faster with
+	  small sectors. On the other hand erasing should be faster when using
+	  64 KiB block instead of 16 × 4 KiB sectors.
+
+	  Please note that some tools/drivers/filesystems may not work with
+	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
 	depends on ARCH_MXC