openwrt/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

From 4a4aca08b11501cb1b2c509113bbb65eb66a1f45 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 14 Apr 2017 14:21:25 +0100
Subject: sfp: hack: allow marvell 10G phy support to use SFP

Allow the Marvell 10G PHY to register with the SFP bus, so that SFP+
cages can work.  This bypasses phylink, meaning that socket status
is not taken into account for the link state.  Also, the tx-disable
signal must be commented out in DT for this to work...

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/marvell10g.c | 54 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -15,8 +15,10 @@
  * If both the fiber and copper ports are connected, the first to gain
  * link takes priority and the other port is completely locked out.
  */
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/marvell_phy.h>
+#include <linux/sfp.h>
 
 enum {
 	MV_PCS_BASE_T		= 0x0000,
@@ -38,6 +40,11 @@ enum {
 	MV_AN_RESULT_SPD_10000	= BIT(15),
 };
 
+struct mv3310_priv {
+	struct device_node *sfp_node;
+	struct sfp_bus *sfp_bus;
+};
+
 static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
 			 u16 mask, u16 bits)
 {
@@ -56,17 +63,52 @@ static int mv3310_modify(struct phy_devi
 	return ret < 0 ? ret : 1;
 }
 
+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+
+	if (sfp_parse_interface(priv->sfp_bus, id) != PHY_INTERFACE_MODE_10GKR) {
+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct sfp_upstream_ops mv3310_sfp_ops = {
+	.module_insert = mv3310_sfp_insert,
+};
+
 static int mv3310_probe(struct phy_device *phydev)
 {
+	struct mv3310_priv *priv;
 	u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
 
 	if (!phydev->is_c45 ||
 	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
 		return -ENODEV;
 
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&phydev->mdio.dev, priv);
+
+	if (phydev->mdio.dev.of_node)
+		priv->sfp_node = of_parse_phandle(phydev->mdio.dev.of_node,
+						  "sfp", 0);
+
 	return 0;
 }
 
+static void mv3310_remove(struct phy_device *phydev)
+{
+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+
+	if (priv->sfp_bus)
+		sfp_unregister_upstream(priv->sfp_bus);
+}
+
 /*
  * Resetting the MV88X3310 causes it to become non-responsive.  Avoid
  * setting the reset bit(s).
@@ -78,6 +120,7 @@ static int mv3310_soft_reset(struct phy_
 
 static int mv3310_config_init(struct phy_device *phydev)
 {
+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
 	u32 mask;
 	int val;
@@ -166,6 +209,14 @@ static int mv3310_config_init(struct phy
 	phydev->supported &= mask;
 	phydev->advertising &= phydev->supported;
 
+	/* Would be nice to do this in the probe function, but unfortunately,
+	 * phylib doesn't have phydev->attached_dev set there.
+	 */
+	if (priv->sfp_node && !priv->sfp_bus)
+		priv->sfp_bus = sfp_register_upstream(priv->sfp_node,
+						      phydev->attached_dev,
+						      phydev, &mv3310_sfp_ops);
+
 	return 0;
 }
 
@@ -349,12 +400,13 @@ static struct phy_driver mv3310_drivers[
 				  SUPPORTED_FIBRE |
 				  SUPPORTED_10000baseT_Full |
 				  SUPPORTED_Backplane,
-		.probe		= mv3310_probe,
 		.soft_reset	= mv3310_soft_reset,
 		.config_init	= mv3310_config_init,
+		.probe		= mv3310_probe,
 		.config_aneg	= mv3310_config_aneg,
 		.aneg_done	= mv3310_aneg_done,
 		.read_status	= mv3310_read_status,
+		.remove		= mv3310_remove,
 	},
 };