hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/lantiq/dts/amazonse.dtsi

153 lines
2.9 KiB
Plaintext
Raw Normal View History

lantiq: Sanitize device tree files The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes. This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de> [sanitize all device tree files] Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-29 16:22:55 +00:00
#include <dt-bindings/gpio/gpio.h>
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ase";
cpus {
cpu@0 {
compatible = "mips,mips4Kc";
};
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
compatible = "lantiq,wdt";
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
compatible = "lantiq,eiu-xway";
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
reg = <0x101000 0x1000>;
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
interrupt-parent = <&icu0>;
lantiq: use new property name for eiu irqs Signed-off-by: John Crispin <john@phrozen.org>
2016-06-07 16:59:52 +00:00
lantiq,eiu-irqs = <29 30 31>;
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
spi@E100800 {
lantiq: Switch to the new SPI driver Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
compatible = "lantiq,ase-spi";
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <24 25 26>;
lantiq: Switch to the new SPI driver Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
#address-cells = <1>;
#size-cells = <1>;
};
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
lantiq: cleanup dts files - remove not existing properties - remove properties having the same values as the included dtsi - remove nodes which are disabled in the included dtsi and not enabled in dts - replace the deprecated pinctrl-* compatible strings - use the same labels for nodes as the included dtsi - move common used vr9 pci properties to vr9.dtsi - remove the unused stp node from HomeHub 2B devcie tree source file - fix spaces vs. tabs and remove superfluous linebreaks Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-02 18:49:04 +00:00
interrupts = <97 98 99 100 101 102>;
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
status = "disabled";
};
gpio: pinmux@E100B10 {
lantiq: Use the new pinctrl compatible strings These were introduced in upstream commit be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree bindings" and finally allow us to use the individual pins within our dts (for example spi_clk, etc.). Please note that this changes the number of GPIOs which are available for some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56 pins were exposed. This means that all places which are using hardcoded GPIO numbers (which are not passed via device-tree) need to be adjusted (because the first GPIO number is now 462, instead of 456). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48284
2016-01-17 19:55:04 +00:00
compatible = "lantiq,ase-pinctrl";
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
};
serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <72 74 75>;
};
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
mei@E116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <63>;
};
ifxhcd@E101000 {
compatible = "lantiq,ifxhcd-ase";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
interrupt-parent = <&icu0>;
interrupts = <39>;
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
status = "disabled";
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
add devicetrees SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
ppe@E234000 {
compatible = "lantiq,ppe-ase";
interrupt-parent = <&icu0>;
interrupts = <85>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <105 109>;
};
};
adsl {
compatible = "lantiq,adsl-ase";
adds dts files and make devicetree images buildable SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
};
};