hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/toolchain/kernel-headers/patches-2.6.28/100-ubicom_headers.patch

14724 lines
452 KiB
Diff
Raw Normal View History

add a heavily cleaned up version of ubicom32 toolchain support SVN-Revision: 17346
2009-08-21 22:31:47 +00:00
diff -ruN linux-2.6.28.10_o/arch/ubicom32/configs/IP5160EVAL_defconfig linux-2.6.28.10/arch/ubicom32/configs/IP5160EVAL_defconfig
--- linux-2.6.28.10_o/arch/ubicom32/configs/IP5160EVAL_defconfig 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/configs/IP5160EVAL_defconfig 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,524 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28.10
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_UBICOM32=y
+CONFIG_RAMKERNEL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_HAVE_CLK=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GPIOLIB=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+
+#
+# Processor type and features
+#
+CONFIG_BRD_32MB=y
+
+#
+# Processor type will be selected by Board
+#
+CONFIG_UBICOM32_V3=y
+
+#
+# Board
+#
+# CONFIG_NOBOARD is not set
+# CONFIG_IP5170DPF is not set
+# CONFIG_IP5160DEV is not set
+CONFIG_IP5160EVAL=y
+# CONFIG_IP7145DPF is not set
+# CONFIG_IP7160RGW is not set
+# CONFIG_IP7160BRINGUP is not set
+# CONFIG_IP7160DPF is not set
+# CONFIG_IP7500MODULE is not set
+# CONFIG_IP7500AV is not set
+# CONFIG_IP7500MEDIA is not set
+
+#
+# Kernel Options
+#
+# CONFIG_SMP is not set
+CONFIG_TIMER_EXTRA_ALLOC=0
+# CONFIG_IRQSTACKS is not set
+CONFIG_UBICOM32_OCM_MODULES=y
+CONFIG_OCM_MODULES_RESERVATION=41
+CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE=y
+CONFIG_HZ=1000
+
+#
+# RAM configuration
+#
+CONFIG_RAMSIZE=0x02000000
+CONFIG_KERNELBASE=0x40400000
+
+#
+# Build options
+#
+CONFIG_LINKER_RELAXATION=y
+
+#
+# Driver options
+#
+
+#
+# PCI Bus
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Input devices
+#
+# CONFIG_UBICOM_INPUT is not set
+# CONFIG_UBICOM_INPUT_I2C is not set
+CONFIG_UBICOM_SWITCH=y
+
+#
+# Misc devices
+#
+# CONFIG_UBICOM_HID is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUM0"
+# CONFIG_CMDLINE_OVERRIDE is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PROTECT_KERNEL=y
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_STOP_ON_TRAP is not set
+# CONFIG_STOP_ON_BUG is not set
+# CONFIG_DEBUG_IRQMEASURE is not set
+# CONFIG_DEBUG_PCIMEASURE is not set
+# CONFIG_ACCESS_OK_CHECKS_ENABLED is not set
+CONFIG_UNALIGNED_ACCESS_ENABLED=y
+# CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY is not set
+# CONFIG_UNALIGNED_ACCESS_DISABLED is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_DEBUG_DRIVER=y
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UBI32_SERDES=y
+CONFIG_SERIAL_UBI32_SERDES_CONSOLE=y
+# CONFIG_SERIAL_UBI32_MAILBOX is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Layered filesystems
+#
+# CONFIG_UNION_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff -ruN linux-2.6.28.10_o/arch/ubicom32/configs/IP7160RGW_defconfig linux-2.6.28.10/arch/ubicom32/configs/IP7160RGW_defconfig
--- linux-2.6.28.10_o/arch/ubicom32/configs/IP7160RGW_defconfig 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/configs/IP7160RGW_defconfig 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,1301 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28.10
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_UBICOM32=y
+CONFIG_RAMKERNEL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_HAVE_CLK=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GPIOLIB=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+
+#
+# Processor type and features
+#
+CONFIG_BRD_64MB=y
+
+#
+# Processor type will be selected by Board
+#
+CONFIG_UBICOM32_V4=y
+
+#
+# Board
+#
+# CONFIG_NOBOARD is not set
+# CONFIG_IP5170DPF is not set
+# CONFIG_IP5160DEV is not set
+# CONFIG_IP5160EVAL is not set
+# CONFIG_IP7145DPF is not set
+CONFIG_IP7160RGW=y
+# CONFIG_IP7160BRINGUP is not set
+# CONFIG_IP7160DPF is not set
+# CONFIG_IP7500MODULE is not set
+# CONFIG_IP7500AV is not set
+# CONFIG_IP7500MEDIA is not set
+
+#
+# Kernel Options
+#
+# CONFIG_SMP is not set
+CONFIG_TIMER_EXTRA_ALLOC=0
+# CONFIG_IRQSTACKS is not set
+CONFIG_UBICOM32_OCM_MODULES=y
+CONFIG_OCM_MODULES_RESERVATION=41
+CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMSIZE=0x04000000
+CONFIG_KERNELBASE=0x40400000
+
+#
+# Build options
+#
+# CONFIG_LINKER_RELAXATION is not set
+
+#
+# Driver options
+#
+
+#
+# PCI Bus
+#
+CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_DEV0_IDSEL=0x001000000
+CONFIG_PCI_DEV1_IDSEL=0x002000000
+
+#
+# Input devices
+#
+CONFIG_UBICOM_INPUT=y
+# CONFIG_UBICOM_INPUT_I2C is not set
+CONFIG_UBICOM_SWITCH=y
+CONFIG_UBICOM_SWITCH_BCM539X=y
+
+#
+# Misc devices
+#
+# CONFIG_UBICOM_HID is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUM0 console=ttyUS0 serdes=0x02004000,61,250000000"
+# CONFIG_CMDLINE_OVERRIDE is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PROTECT_KERNEL=y
+# CONFIG_NO_KERNEL_MSG is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_STOP_ON_TRAP is not set
+# CONFIG_STOP_ON_BUG is not set
+# CONFIG_DEBUG_IRQMEASURE is not set
+# CONFIG_DEBUG_PCIMEASURE is not set
+# CONFIG_ACCESS_OK_CHECKS_ENABLED is not set
+CONFIG_UNALIGNED_ACCESS_ENABLED=y
+# CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY is not set
+# CONFIG_UNALIGNED_ACCESS_DISABLED is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=y
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=y
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_MATCH_AH=y
+# CONFIG_IP_NF_MATCH_ECN is not set
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_NF_QOS_UBICOM_STREAMENGINE_DEFAULT_CLASSIFIER is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_NF_NAT_SNMP_BASIC=y
+CONFIG_NF_NAT_PROTO_GRE=y
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_PPTP=y
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+CONFIG_IP_NF_TARGET_TTL=y
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+CONFIG_MTD_UBI32_M25P80=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_UBICOM32_GMAC=y
+CONFIG_UBICOM32_NAPI=y
+CONFIG_UBICOM32_OCM_FOR_SKB=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UBI32_SERDES is not set
+CONFIG_SERIAL_UBI32_MAILBOX=y
+CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_UBICOM32=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_UBICOM32_GPIO=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_UBI32_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_TUSB6010 is not set
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Layered filesystems
+#
+CONFIG_UNION_FS=y
+# CONFIG_UNION_FS_XATTR is not set
+# CONFIG_UNION_FS_DEBUG is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=y
+CONFIG_TEXTSEARCH_BM=y
+CONFIG_TEXTSEARCH_FSM=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/a.out.h linux-2.6.28.10/arch/ubicom32/include/asm/a.out.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/a.out.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/a.out.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,47 @@
+/*
+ * arch/ubicom32/include/asm/a.out.h
+ * Definitions for Ubicom32 a.out executable format.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_A_OUT_H
+#define _ASM_UBICOM32_A_OUT_H
+
+struct exec
+{
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file, in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in bytes */
+ unsigned a_drsize; /* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#endif /* _ASM_UBICOM32_A_OUT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/atomic.h linux-2.6.28.10/arch/ubicom32/include/asm/atomic.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/atomic.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/atomic.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,352 @@
+/*
+ * arch/ubicom32/include/asm/atomic.h
+ * Atomic operations definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ATOMIC_H
+#define _ASM_UBICOM32_ATOMIC_H
+
+#include <asm/system.h>
+#include <asm/ubicom32-common.h>
+#include <asm/types.h>
+
+/*
+ * Most instructions on the Ubicom32 processor are atomic in that they
+ * execute in one clock cycle. However, Linux has several operations
+ * (e.g. compare and swap) which will require more than a single instruction
+ * to perform. To achieve this, the Ubicom32 processor uses a single
+ * global bit in a scratchpad register as a critical section lock. All
+ * atomic operations acquire this lock.
+ *
+ * NOTE: To AVOID DEADLOCK(s), the atomic lock must only be used for atomic
+ * operations or by the ldsr to avoid disabling a thread performing an atomic
+ * operation.
+ *
+ * Do not attempt to disable interrupts while holding the atomic operations
+ * lock or you will DEADLOCK the system.
+ */
+
+typedef struct {
+ volatile int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+/*
+ * __atomic_add()
+ * Add i to v and return the result.
+ */
+static inline void __atomic_add(int i, atomic_t *v)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter += i;
+ __atomic_lock_release();
+}
+
+/*
+ * __atomic_sub()
+ * Subtract i from v and return the result.
+ */
+static inline void __atomic_sub(int i, atomic_t *v)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter -= i;
+ __atomic_lock_release();
+}
+
+/*
+ * __atomic_add_return()
+ * Add i to v and return the result.
+ *
+ * The implementation here looks rather odd because we appear to be doing
+ * the addition twice. In fact that's exactly what we're doing but with
+ * the ubicom32 instruction set we can do the inner load and add with two
+ * instructions whereas generating both the atomic result and the "ret"
+ * result requires three instructions. The second add is generally only as
+ * costly as a move instruction and in cases where we compare the result
+ * with a constant the compiler can fold two constant values and do a
+ * single instruction, thus saving an instruction overall!
+ *
+ * At the worst we save one instruction inside the atomic lock.
+ */
+static inline int __atomic_add_return(int i, atomic_t *v)
+{
+ int ret;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ vt->counter = ret + i;
+ __atomic_lock_release();
+
+ return ret + i;
+}
+
+/*
+ * __atomic_sub_return()
+ * Subtract i from v and return the result.
+ *
+ * The implementation here looks rather odd because we appear to be doing
+ * the subtraction twice. In fact that's exactly what we're doing but with
+ * the ubicom32 instruction set we can do the inner load and sub with two
+ * instructions whereas generating both the atomic result and the "ret"
+ * result requires three instructions. The second sub is generally only as
+ * costly as a move instruction and in cases where we compare the result
+ * with a constant the compiler can fold two constant values and do a
+ * single instruction, thus saving an instruction overall!
+ *
+ * At the worst we save one instruction inside the atomic lock.
+ */
+static inline int __atomic_sub_return(int i, atomic_t *v)
+{
+ int ret;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ vt->counter = ret - i;
+ __atomic_lock_release();
+
+ return ret - i;
+}
+
+/*
+ * PUBLIC API FOR ATOMIC!
+ */
+#define atomic_add(i,v) (__atomic_add( ((int)i),(v)))
+#define atomic_sub(i,v) (__atomic_sub( ((int)i),(v)))
+#define atomic_inc(v) (__atomic_add( 1,(v)))
+#define atomic_dec(v) (__atomic_sub( 1,(v)))
+#define atomic_add_return(i,v) (__atomic_add_return( ((int)i),(v)))
+#define atomic_sub_return(i,v) (__atomic_sub_return( ((int)i),(v)))
+#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
+#define atomic_dec_return(v) (__atomic_sub_return( 1,(v)))
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
+
+/*
+ * atomic_read()
+ * Acquire the atomic lock and read the variable.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+ int ret;
+ const atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ __atomic_lock_release();
+
+ return ret;
+}
+
+/*
+ * atomic_set()
+ * Acquire the atomic lock and set the variable.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter = i;
+ __atomic_lock_release();
+}
+
+/*
+ * atomic_cmpxchg
+ * Acquire the atomic lock and exchange if current == old.
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ if (prev == old) {
+ vt->counter = new;
+ }
+ __atomic_lock_release();
+
+ return prev;
+}
+
+/*
+ * atomic_xchg()
+ * Acquire the atomic lock and exchange values.
+ */
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ vt->counter = new;
+ __atomic_lock_release();
+
+ return prev;
+}
+
+/*
+ * atomic_add_unless()
+ * Acquire the atomic lock and add a unless the value is u.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ if (prev != u) {
+ vt->counter += a;
+ __atomic_lock_release();
+ return 1;
+ }
+
+ __atomic_lock_release();
+ return 0;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#include <asm-generic/atomic.h>
+
+/*
+ * The following is not a real function. The compiler should remove the function
+ * call as long as the user does not pass in a size that __xchg and __cmpxchg
+ * are not prepared for. If the user does pass in an unknown size, the user
+ * will get a link time error.
+ *
+ * The no return is to prevent a compiler error that can occur when dealing with
+ * uninitialized variables. Given that the function doesn't exist there is no
+ * net effect (and if it did it would not return).
+ */
+extern void __xchg_called_with_bad_pointer(void) __attribute__((noreturn));
+
+/*
+ * __xchg()
+ * Xchange *ptr for x atomically.
+ *
+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
+ * atomic exchange instruction so we use the global atomic_lock.
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+ unsigned long ret;
+
+ __atomic_lock_acquire();
+
+ switch (size) {
+ case 1:
+ ret = *(volatile unsigned char *)ptr;
+ *(volatile unsigned char *)ptr = x;
+ break;
+
+ case 2:
+ ret = *(volatile unsigned short *)ptr;
+ *(volatile unsigned short *)ptr = x;
+ break;
+
+ case 4:
+ ret = *(volatile unsigned int *)ptr;
+ *(volatile unsigned int *)ptr = x;
+ break;
+
+ default:
+ __xchg_called_with_bad_pointer();
+ break;
+ }
+ __atomic_lock_release();
+ return ret;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+/*
+ * __cmpxchg()
+ * Compare and Xchange *ptr for x atomically.
+ *
+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
+ * atomic exchange instruction so we use the global atomic_lock.
+ */
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long next, int size)
+{
+ unsigned long prev;
+
+ __atomic_lock_acquire();
+ switch (size) {
+ case 1:
+ prev = *(u8 *)ptr;
+ if (prev == old) {
+ *(u8 *)ptr = (u8)next;
+ }
+ break;
+
+ case 2:
+ prev = *(u16 *)ptr;
+ if (prev == old) {
+ *(u16 *)ptr = (u16)next;
+ }
+ break;
+
+ case 4:
+ prev = *(u32 *)ptr;
+ if (prev == old) {
+ *(u32 *)ptr = (u32)next;
+ }
+ break;
+
+ default:
+ __xchg_called_with_bad_pointer();
+ break;
+ }
+ __atomic_lock_release();
+ return prev;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
+
+#define cmpxchg(ptr, o, n) __cmpxchg((ptr), (o), (n), sizeof(*(ptr)))
+
+#define smp_mb__before_atomic_inc() asm volatile ("" : : : "memory")
+#define smp_mb__after_atomic_inc() asm volatile ("" : : : "memory")
+#define smp_mb__before_atomic_dec() asm volatile ("" : : : "memory")
+#define smp_mb__after_atomic_dec() asm volatile ("" : : : "memory")
+
+#endif /* _ASM_UBICOM32_ATOMIC_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/audio_tio.h linux-2.6.28.10/arch/ubicom32/include/asm/audio_tio.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/audio_tio.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/audio_tio.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/audio_tio.h
+ * AudioTIO include file
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _AUDIO_TIO_H
+#define _AUDIO_TIO_H
+
+#include <asm/devtree.h>
+#include <asm/ubi32-pcm.h>
+
+#define UBI32_AUDIO_INT_FLAG_MORE_SAMPLES 0x00000001
+#define UBI32_AUDIO_INT_FLAG_COMMAND 0x00000002
+
+/*
+ * Commands the Primary OS sends to the audio device
+ */
+enum ubi32_audio_command {
+ UBI32_AUDIO_CMD_NONE,
+ UBI32_AUDIO_CMD_START,
+ UBI32_AUDIO_CMD_STOP,
+ UBI32_AUDIO_CMD_PAUSE,
+ UBI32_AUDIO_CMD_RESUME,
+ UBI32_AUDIO_CMD_MUTE,
+ UBI32_AUDIO_CMD_UNMUTE,
+ UBI32_AUDIO_CMD_SETUP,
+ UBI32_AUDIO_CMD_ENABLE,
+ UBI32_AUDIO_CMD_DISABLE,
+};
+
+/*
+ * Flag bits passed in the registers
+ */
+#define UBI32_CMD_SETUP_FLAG_LE (1 << 0) /* Use Little Endian Mode */
+
+/*
+ * Status bits that audio device can set to indicate reason
+ * for interrupting the Primary OS
+ */
+#define UBI32_AUDIO_STATUS_PLAY_DMA0_REQUEST (1 << 0) /* Audio device needs samples in DMA0 for playback */
+#define UBI32_AUDIO_STATUS_PLAY_DMA1_REQUEST (1 << 1) /* Audio device needs samples in DMA1 for playback */
+
+struct ubi32_audio_dma {
+ /*
+ * NOTE: The active flag shall only be SET by the producer and CLEARED
+ * by the consumer, NEVER the other way around. For playback, the
+ * Primary OS sets this flag and ipAudioTIO clears it.
+ *
+ * The producer shall not modify the ptr or ctr fields when the transfer
+ * is marked as active, as these are used by the consumer to do the
+ * transfer.
+ */
+ volatile uint32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
+ //volatile u32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
+ volatile void *ptr; /* Pointer to data to be transferred */
+ volatile uint32_t ctr; /* Counter: number of data units to transfer */
+ //volatile u32_t ctr; /* Counter: number of data units to transfer */
+};
+
+#define AUDIOTIONODE_CAP_BE (1 << 0)
+#define AUDIOTIONODE_CAP_LE (1 << 1)
+
+/*
+ * Resource indices used to access IRQs via platform_get_resource
+ */
+#define AUDIOTIO_MEM_RESOURCE 0
+#define AUDIOTIO_TX_IRQ_RESOURCE 0
+#define AUDIOTIO_RX_IRQ_RESOURCE 1
+
+#define AUDIOTIONODE_VERSION 5
+struct audiotionode {
+ struct devtree_node dn;
+ uint32_t version; /* Version of this node */
+ struct audiotioregs *regs;
+};
+
+#define AUDIOTIOREGS_VERSION 3
+struct audiotioregs {
+ uint32_t version;
+ uint32_t caps; /* Capabilities of the driver */
+ u32_t *sample_rates; /* Sample Rates supported by this driver */
+ u32_t n_sample_rates; /* Number of sample rates supported by this driver */
+ u32_t channel_mask; /* The channel configs supported by this driver (bit 1 = 1 channel, etc) */
+ volatile uint32_t int_flags; /* Reason for interrupting audio device */
+ volatile enum ubi32_audio_command command; /* Command from Primary OS */
+ volatile uint32_t flags; /* Flag bits for this command */
+ volatile uint32_t channels; /* Number of channels in stream */
+ volatile uint32_t sample_rate; /* Sample rate */
+ volatile uint32_t status; /* Status bits sent from AudioTIO to Primary OS */
+ volatile void *current_read_pos; /* Position of next sample to be removed from Primary OS sample buffer */
+
+ /*
+ * These are the transfer requests. They are used in alternating
+ * order so that when ipAudioTIO is processing one request, the
+ * Primary OS can fill in the other one.
+ *
+ * NOTE: The active bit shall always be SET by the producer and
+ * CLEARED by the consumer, NEVER the other way around.
+ */
+ struct ubi32_audio_dma playback_xfer_requests[2];
+};
+
+extern struct platform_device * __init audio_tio_alloc(const char *driver_name, const char *node_name, int priv_size);
+
+#define audio_tio_priv(pdev) (((struct ubi32pcm_platform_data *)(((struct platform_device *)(pdev))->dev.platform_data))->priv_data)
+#endif
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/auxvec.h linux-2.6.28.10/arch/ubicom32/include/asm/auxvec.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/auxvec.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/auxvec.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,32 @@
+/*
+ * arch/ubicom32/include/asm/auxvec.h
+ * Symbolic values for the entries in the auxiliary table
+ * put on the initial stack.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_AUXVEC_H
+#define _ASM_UBICOM32_AUXVEC_H
+
+#endif /* _ASM_UBICOM32_AUXVEC_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/bitops.h linux-2.6.28.10/arch/ubicom32/include/asm/bitops.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/bitops.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/bitops.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,171 @@
+/*
+ * arch/ubicom32/include/asm/bitops.h
+ * Bit manipulation definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BITOPS_H
+#define _ASM_UBICOM32_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h> /* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+#include <asm/ubicom32-common.h>
+
+static inline void set_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p |= mask;
+ __atomic_lock_release();
+}
+
+static inline void clear_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p &= ~mask;
+ __atomic_lock_release();
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+static inline void change_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p ^= mask;
+ __atomic_lock_release();
+}
+
+static inline int test_and_set_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res | mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+static inline int test_and_clear_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res & ~mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+static inline int test_and_change_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res ^ mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(int nr, const volatile unsigned long *addr)
+{
+ int * a = (int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) (__builtin_constant_p(nr) ? __constant_test_bit((nr),(addr)) : __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _ASM_UBICOM32_BITOPS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/board.h linux-2.6.28.10/arch/ubicom32/include/asm/board.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/board.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/board.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/board.h
+ * Board init and revision definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BOARD_H
+#define _ASM_UBICOM32_BOARD_H
+
+extern const char *board_get_revision(void);
+extern void __init board_init(void);
+
+#endif /* _ASM_UBICOM32_BOARD_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/bootargs.h linux-2.6.28.10/arch/ubicom32/include/asm/bootargs.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/bootargs.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/bootargs.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/bootargs.h
+ * Kernel command line via the devtree API.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BOOTARGS_H
+#define _ASM_UBICOM32_BOOTARGS_H
+
+extern const char *bootargs_get_cmdline(void);
+extern void __init bootargs_init(void);
+
+#endif /* _ASM_UBICOM32_BOOTARGS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/bootinfo.h linux-2.6.28.10/arch/ubicom32/include/asm/bootinfo.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/bootinfo.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/bootinfo.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/bootinfo.h
+ * Definitions of firmware boot parameters passed to the kernel.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_BOOTINFO_H
+#define _ASM_UBICOM32_BOOTINFO_H
+
+/* Nothing for ubicom32 */
+
+#endif /* _ASM_UBICOM32_BOOTINFO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/bug.h linux-2.6.28.10/arch/ubicom32/include/asm/bug.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/bug.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/bug.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,53 @@
+/*
+ * arch/ubicom32/include/asm/bug.h
+ * Generic bug.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BUG_H
+#define _ASM_UBICOM32_BUG_H
+
+#include <linux/kernel.h>
+#include <asm/thread.h>
+
+#if defined(CONFIG_STOP_ON_BUG)
+/*
+ * __BUG_ON()
+ * Stall all threads to enable debugging.
+ */
+static inline void __BUG_ON(unsigned long c)
+{
+ if (unlikely(c)) {
+ THREAD_STALL;
+ }
+ return;
+}
+
+#define BUG_ON(c) __BUG_ON((unsigned long)(c))
+#define HAVE_ARCH_BUG_ON
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_UBICOM32_BUG_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/bugs.h linux-2.6.28.10/arch/ubicom32/include/asm/bugs.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/bugs.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/bugs.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/bugs.h
+ * Definition of check_bugs() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+#ifndef _ASM_UBICOM32_BUGS_H
+#define _ASM_UBICOM32_BUGS_H
+
+static void check_bugs(void)
+{
+}
+
+#endif /* _ASM_UBICOM32_BUGS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/byteorder.h linux-2.6.28.10/arch/ubicom32/include/asm/byteorder.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/byteorder.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/byteorder.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,48 @@
+/*
+ * arch/ubicom32/include/asm/byteorder.h
+ * Byte order swapping utility routines.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BYTEORDER_H
+#define _ASM_UBICOM32_BYTEORDER_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#if defined(IP7000) || defined(IP7000_REV2)
+
+#define __arch__swab16 __builtin_ubicom32_swapb_2
+#define __arch__swab32 __builtin_ubicom32_swapb_4
+
+#endif /* IP7000 */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_UBICOM32_BYTEORDER_H */
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/cachectl.h linux-2.6.28.10/arch/ubicom32/include/asm/cachectl.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/cachectl.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/cachectl.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/cachectl.h
+ * Ubicom32 cache control definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHECTL_H
+#define _ASM_UBICOM32_CACHECTL_H
+
+#include <asm/ip5000.h>
+
+/*
+ * mem_cache_control()
+ * Special cache control operation
+ */
+extern void mem_cache_control(unsigned long cc, unsigned long begin_addr, unsigned long end_addr, unsigned long op);
+
+#endif /* _ASM_UBICOM32_CACHECTL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/cacheflush.h linux-2.6.28.10/arch/ubicom32/include/asm/cacheflush.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/cacheflush.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/cacheflush.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,104 @@
+/*
+ * arch/ubicom32/include/asm/cacheflush.h
+ * Cache flushing definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHEFLUSH_H
+#define _ASM_UBICOM32_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+#include <asm/cachectl.h>
+#include <asm/ip5000.h>
+
+#define flush_cache_all() __flush_cache_all()
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) __flush_cache_all()
+#define flush_cache_page(vma, vmaddr) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#define flush_dcache_range(start, end) \
+do { \
+ /* Flush the data cache and invalidate the I cache. */ \
+ local_irq_disable(); \
+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
+ local_irq_enable(); \
+} while (0)
+
+#define flush_icache_range(start, end) \
+do { \
+ /* Flush the data cache and invalidate the I cache. */ \
+ local_irq_disable(); \
+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
+ local_irq_enable(); \
+} while (0)
+
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * Cache handling for IP5000
+ */
+extern inline void mem_cache_invalidate_all(unsigned long cc)
+{
+ asm volatile (
+ " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
+ " nop \n\t"
+ " bclr "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
+ " pipe_flush 0 \n\t"
+ :
+ : "a"(cc)
+ : "cc"
+ );
+}
+
+static inline void __flush_cache_all(void)
+{
+ /*
+ * Flush Icache
+ */
+ mem_cache_invalidate_all(ICCR_BASE);
+
+ /*
+ * Flush Dcache
+ */
+ mem_cache_invalidate_all(DCCR_BASE);
+}
+
+#endif /* _ASM_UBICOM32_CACHEFLUSH_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/cache.h linux-2.6.28.10/arch/ubicom32/include/asm/cache.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/cache.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/cache.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,40 @@
+/*
+ * arch/ubicom32/include/asm/cache.h
+ * Cache line definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHE_H
+#define _ASM_UBICOM32_CACHE_H
+
+/*
+ * bytes per L1 cache line
+ */
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif /* _ASM_UBICOM32_CACHE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/checksum.h linux-2.6.28.10/arch/ubicom32/include/asm/checksum.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/checksum.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/checksum.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,149 @@
+/*
+ * arch/ubicom32/include/asm/checksum.h
+ * Checksum utilities for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CHECKSUM_H
+#define _ASM_UBICOM32_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ asm volatile (
+ " lsr.4 d15, %0, #16 \n\t"
+ " bfextu %0, %0, #16 \n\t"
+ " add.4 %0, d15, %0 \n\t"
+ " lsr.4 d15, %0, #16 \n\t"
+ " bfextu %0, %0, #16 \n\t"
+ " add.4 %0, d15, %0 \n\t"
+ : "=&d" (sum)
+ : "0"(sum)
+ : "d15"
+ );
+ return (__force __sum16)~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ asm volatile (
+ " add.4 %0, %2, %0 \n\t"
+ " addc %0, %3, %0 \n\t"
+ " addc %0, %4, %0 \n\t"
+ " addc %0, %5, %0 \n\t"
+ " addc %0, #0, %0 \n\t"
+ : "=&d" (sum)
+ : "0"(sum), "r" (saddr), "r" (daddr), "r" (len), "r"(proto)
+ );
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ asm volatile (
+ " add.4 %0, 0(%2), %0 \n\t"
+ " addc %0, 4(%2), %0 \n\t"
+ " addc %0, 8(%2), %0 \n\t"
+ " addc %0, 12(%2), %0 \n\t"
+ " addc %0, 0(%3), %0 \n\t"
+ " addc %0, 4(%3), %0 \n\t"
+ " addc %0, 8(%3), %0 \n\t"
+ " addc %0, 12(%3), %0 \n\t"
+ " addc %0, %4, %0 \n\t"
+ " addc %0, #0, %0 \n\t"
+ : "=&d" (sum)
+ : "0" (sum), "a" (saddr), "a" (daddr), "d" (len + proto)
+ );
+ return csum_fold(sum);
+}
+
+#endif /* _ASM_UBICOM32_CHECKSUM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/cpu.h linux-2.6.28.10/arch/ubicom32/include/asm/cpu.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/cpu.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/cpu.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,45 @@
+/*
+ * arch/ubicom32/include/asm/cpu.h
+ * CPU definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CPU_H
+#define _ASM_UBICOM32_CPU_H
+
+#include <linux/percpu.h>
+
+struct cpuinfo_ubicom32 {
+ unsigned long tid; /* Hardware thread number */
+
+#ifdef CONFIG_SMP
+ volatile unsigned long ipi_pending; /* Bit map of operations to execute */
+ unsigned long ipi_count; /* Number of IPI(s) taken on this cpu */
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
+
+#endif /* _ASM_UBICOM32_CPU_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/cputime.h linux-2.6.28.10/arch/ubicom32/include/asm/cputime.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/cputime.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/cputime.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/cputime.h
+ * Generic cputime.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CPUTIME_H
+#define _ASM_UBICOM32_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_UBICOM32_CPUTIME_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/current.h linux-2.6.28.10/arch/ubicom32/include/asm/current.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/current.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/current.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/current.h
+ * Definition of get_current() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CURRENT_H
+#define _ASM_UBICOM32_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+ return(current_thread_info()->task);
+}
+
+#define current get_current()
+
+#endif /* _ASM_UBICOM32_CURRENT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/delay.h linux-2.6.28.10/arch/ubicom32/include/asm/delay.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/delay.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/delay.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,75 @@
+/*
+ * arch/ubicom32/include/asm/delay.h
+ * Definition of delay routines for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DELAY_H
+#define _ASM_UBICOM32_DELAY_H
+
+#include <asm/param.h>
+#include <asm/ip5000.h>
+
+static inline void __delay(unsigned long loops)
+{
+ if (loops == 0) {
+ return;
+ }
+
+ asm volatile (
+ "1: add.4 %0, #-1, %0 \n\t"
+ " jmpne.t 1b \n\t"
+ : "+d" (loops)
+ );
+}
+
+/*
+ * Ubicom32 processor uses fixed 12MHz external OSC.
+ * So we use that as reference to count 12 cycles/us
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_UBICOM32_V4) || defined(CONFIG_UBICOM32_V3)
+ asm volatile (
+ " add.4 d15, 0(%0), %1 \n\t"
+ " sub.4 #0, 0(%0), d15 \n\t"
+ " jmpmi.w.f .-4 \n\t"
+ :
+ : "a"(TIMER_BASE + TIMER_MPTVAL), "d"(usecs * (12000000/1000000))
+ : "d15"
+ );
+#else
+ BUG();
+#endif
+}
+
+/*
+ * Moved the udelay() function into library code, no longer inlined.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* _ASM_UBICOM32_DELAY_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/device.h linux-2.6.28.10/arch/ubicom32/include/asm/device.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/device.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/device.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/device.h
+ * Generic device.h for Ubicom32 architecture.
+ *
+ * Used for arch specific extensions to struct device
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DEVICE_H
+#define _ASM_UBICOM32_DEVICE_H
+
+#include <asm-generic/device.h>
+
+#endif /* _ASM_UBICOM32_DEVICE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/devtree.h linux-2.6.28.10/arch/ubicom32/include/asm/devtree.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/devtree.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/devtree.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,52 @@
+/*
+ * arch/ubicom32/include/asm/devtree.h
+ * Device Tree Header File (Shared between ultra and the Host OS)
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_DEVTREE_H
+#define _ASM_UBICOM32_DEVTREE_H
+
+#define DEVTREE_MAX_NAME 32
+#define DEVTREE_IRQ_NONE 0xff
+#define DEVTREE_IRQ_DONTCARE 0xff
+#define DEVTREE_NODE_MAGIC 0x10203040
+
+struct devtree_node {
+ struct devtree_node *next;
+ unsigned char sendirq;
+ unsigned char recvirq;
+ char name[DEVTREE_MAX_NAME];
+ unsigned int magic;
+};
+
+extern struct devtree_node *devtree;
+extern struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq);
+extern struct devtree_node *devtree_find_node(const char *str);
+extern struct devtree_node *devtree_find_next(struct devtree_node **cur);
+extern int devtree_irq(struct devtree_node *dn, unsigned char *sendirq, unsigned char *recvirq);
+extern void devtree_print(void);
+
+#endif /* _ASM_UBICOM32_DEVTREE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/div64.h linux-2.6.28.10/arch/ubicom32/include/asm/div64.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/div64.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/div64.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/div64.h
+ * Generic div64.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DIV64_H
+#define _ASM_UBICOM32_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* _ASM_UBICOM32_DIV64_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/dma.h linux-2.6.28.10/arch/ubicom32/include/asm/dma.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/dma.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/dma.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/dma.h
+ * DMA definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DMA_H
+#define _ASM_UBICOM32_DMA_H
+
+/* Nothing so far */
+#define MAX_DMA_ADDRESS 0x00 /* This is quite suspicious */
+
+#endif /* _ASM_UBICOM32_DMA_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/dma-mapping.h linux-2.6.28.10/arch/ubicom32/include/asm/dma-mapping.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/dma-mapping.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/dma-mapping.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/dma-mapping.h
+ * Generic dma-mapping.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DMA_MAPPING_H
+#define _ASM_UBICOM32_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <asm-generic/dma-mapping.h>
+
+#endif /* _ASM_UBICOM32_DMA_MAPPING_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/elf.h linux-2.6.28.10/arch/ubicom32/include/asm/elf.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/elf.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/elf.h 2009-08-18 22:35:42.571202890 +0300
@@ -0,0 +1,167 @@
+/*
+ * arch/ubicom32/include/asm/elf.h
+ * Definitions for elf executable format for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ELF_H
+#define _ASM_UBICOM32_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * Processor specific flags for the ELF header e_flags field.
+ */
+#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */
+#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */
+#define EF_UBICOM32_PIC 0x80000000 /* -fpic */
+#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */
+
+/*
+ * Ubicom32 ELF relocation types
+ */
+#define R_UBICOM32_NONE 0
+#define R_UBICOM32_16 1
+#define R_UBICOM32_32 2
+#define R_UBICOM32_LO16 3
+#define R_UBICOM32_HI16 4
+#define R_UBICOM32_21_PCREL 5
+#define R_UBICOM32_24_PCREL 6
+#define R_UBICOM32_HI24 7
+#define R_UBICOM32_LO7_S 8
+#define R_UBICOM32_LO7_2_S 9
+#define R_UBICOM32_LO7_4_S 10
+#define R_UBICOM32_LO7_D 11
+#define R_UBICOM32_LO7_2_D 12
+#define R_UBICOM32_LO7_4_D 13
+#define R_UBICOM32_32_HARVARD 14
+#define R_UBICOM32_LO7_CALLI 15
+#define R_UBICOM32_LO16_CALLI 16
+#define R_UBICOM32_GOT_HI24 17
+#define R_UBICOM32_GOT_LO7_S 18
+#define R_UBICOM32_GOT_LO7_2_S 19
+#define R_UBICOM32_GOT_LO7_4_S 20
+#define R_UBICOM32_GOT_LO7_D 21
+#define R_UBICOM32_GOT_LO7_2_D 22
+#define R_UBICOM32_GOT_LO7_4_D 23
+#define R_UBICOM32_FUNCDESC_GOT_HI24 24
+#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25
+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26
+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27
+#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28
+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29
+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30
+#define R_UBICOM32_GOT_LO7_CALLI 31
+#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32
+#define R_UBICOM32_FUNCDESC_VALUE 33
+#define R_UBICOM32_FUNCDESC 34
+#define R_UBICOM32_GOTOFFSET_LO 35
+#define R_UBICOM32_GOTOFFSET_HI 36
+#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37
+#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38
+#define R_UBICOM32_GNU_VTINHERIT 200
+#define R_UBICOM32_GNU_VTENTRY 201
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_ubicom32fp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_UBICOM32)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_UBICOM32_FDPIC)
+
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_UBICOM32_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_UBICOM32
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+ passed in %a1. Although my copy of the ABI has no such statement, it
+ is actually used on ASV. */
+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, \
+ _dynamic_addr) \
+ do { \
+ _regs->dn[1] = _exec_map_addr; \
+ _regs->dn[2] = _interp_map_addr; \
+ _regs->dn[3] = _dynamic_addr; \
+ _regs->an[1] = 0; /* dl_fini will be set by ldso */ \
+ } while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#ifdef __KERNEL__
+#ifdef CONFIG_UBICOM32_V4
+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V4)
+#elif defined CONFIG_UBICOM32_V3
+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V3)
+#else
+#error Unknown/Unsupported ubicom32 architecture.
+#endif
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+/*
+ * For Ubicom32, the elf_gregset_t and struct pt_regs are the same size
+ * data structure so a copy is performed instead of providing the
+ * ELF_CORE_COPY_REGS macro.
+ */
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* _ASM_UBICOM32_ELF_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/emergency-restart.h linux-2.6.28.10/arch/ubicom32/include/asm/emergency-restart.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/emergency-restart.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/emergency-restart.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/emergency-restart.h
+ * Generic emergency-restart.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_EMERGENCY_RESTART_H
+#define _ASM_UBICOM32_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_UBICOM32_EMERGENCY_RESTART_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/entry.h linux-2.6.28.10/arch/ubicom32/include/asm/entry.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/entry.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/entry.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/entry.h
+ * Entry register/stack definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ENTRY_H
+#define _ASM_UBICOM32_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#endif /* _ASM_UBICOM32_ENTRY_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/errno.h linux-2.6.28.10/arch/ubicom32/include/asm/errno.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/errno.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/errno.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/errno.h
+ * Generic errno.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ERRNO_H
+#define _ASM_UBICOM32_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_UBICOM32_ERRNO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/fb.h linux-2.6.28.10/arch/ubicom32/include/asm/fb.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/fb.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/fb.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/fb.h
+ * Definition of fb_is_primary_device() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FB_H
+#define _ASM_UBICOM32_FB_H
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_UBICOM32_FB_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/fcntl.h linux-2.6.28.10/arch/ubicom32/include/asm/fcntl.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/fcntl.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/fcntl.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,38 @@
+/*
+ * arch/ubicom32/include/asm/fcntl.h
+ * File control bit definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FCNTL_H
+#define _ASM_UBICOM32_FCNTL_H
+
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_UBICOM32_FCNTL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/flat.h linux-2.6.28.10/arch/ubicom32/include/asm/flat.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/flat.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/flat.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,73 @@
+/*
+ * arch/ubicom32/include/asm/flat.h
+ * Definitions to support flat-format executables.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_FLAT_H
+#define _ASM_UBICOM32_FLAT_H
+
+#define ARCH_FLAT_ALIGN 0x80
+#define ARCH_FLAT_ALIGN_TEXT 1
+
+#define R_UBICOM32_32 2
+#define R_UBICOM32_HI24 7
+#define R_UBICOM32_LO7_S 8
+#define R_UBICOM32_LO7_2_S 9
+#define R_UBICOM32_LO7_4_S 10
+#define R_UBICOM32_LO7_D 11
+#define R_UBICOM32_LO7_2_D 12
+#define R_UBICOM32_LO7_4_D 13
+#define R_UBICOM32_LO7_CALLI 15
+#define R_UBICOM32_LO16_CALLI 16
+
+extern void ubicom32_flat_put_addr_at_rp(unsigned long *rp, u32_t val, u32_t rval, unsigned long *p);
+extern unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, u32_t relval, u32_t flags, unsigned long *p);
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) (flags)
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p) (ubicom32_flat_get_addr_from_rp(rp, relval,flags, p))
+#define flat_put_addr_at_rp(rp, val, relval) do {ubicom32_flat_put_addr_at_rp(rp, val, relval, &persistent);} while(0)
+#define flat_get_relocate_addr(rel) ((persistent) ? (persistent & 0x07ffffff) : (rel & 0x07ffffff))
+
+static inline int flat_set_persistent(unsigned int relval, unsigned long *p)
+{
+ if (*p) {
+ return 0;
+ } else {
+ if ((relval >> 27) != R_UBICOM32_32) {
+ /*
+ * Something other than UBICOM32_32. The next entry has the relocation.
+ */
+ *p = relval;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+#endif /* _ASM_UBICOM32_FLAT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/fpu.h linux-2.6.28.10/arch/ubicom32/include/asm/fpu.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/fpu.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/fpu.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/fpu.h
+ * Floating point state definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FPU_H
+#define _ASM_UBICOM32_FPU_H
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+/* No FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+
+#endif /* _ASM_UBICOM32_FPU_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/futex.h linux-2.6.28.10/arch/ubicom32/include/asm/futex.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/futex.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/futex.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/futex.h
+ * Generic futex.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FUTEX_H
+#define _ASM_UBICOM32_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* _ASM_UBICOM32_FUTEX_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/gpio.h linux-2.6.28.10/arch/ubicom32/include/asm/gpio.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/gpio.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/gpio.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,451 @@
+/*
+ * arch/ubicom32/include/asm/gpio.h
+ * Definitions for GPIO operations on Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_GPIO_H
+#define _ASM_UBICOM32_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+#include <asm/ip5000.h>
+
+#define ARCH_NR_GPIOS 512
+#define MAX_UBICOM_ONCHIP_GPIO (9 * 32)
+
+/*
+ * Macros for manipulating GPIO numbers
+ */
+#define gpio_bit(gn) (1 << (gn & 0x1f))
+#define gpio_bank(gn) (gn >> 5)
+
+#define gpio_pin_index(gn) (gn & 0x1f)
+#define gpio_port_index(gn) (gn >> 5)
+
+#define GPIO_RA_0 ((32 * 0) + 0)
+#define GPIO_RA_1 ((32 * 0) + 1)
+#define GPIO_RA_2 ((32 * 0) + 2)
+#define GPIO_RA_3 ((32 * 0) + 3)
+#define GPIO_RA_4 ((32 * 0) + 4)
+#define GPIO_RA_5 ((32 * 0) + 5)
+#define GPIO_RA_6 ((32 * 0) + 6)
+#define GPIO_RA_7 ((32 * 0) + 7)
+
+#define GPIO_RB_0 ((32 * 1) + 0)
+#define GPIO_RB_1 ((32 * 1) + 1)
+#define GPIO_RB_2 ((32 * 1) + 2)
+#define GPIO_RB_3 ((32 * 1) + 3)
+#define GPIO_RB_4 ((32 * 1) + 4)
+#define GPIO_RB_5 ((32 * 1) + 5)
+#define GPIO_RB_6 ((32 * 1) + 6)
+#define GPIO_RB_7 ((32 * 1) + 7)
+#define GPIO_RB_8 ((32 * 1) + 8)
+#define GPIO_RB_9 ((32 * 1) + 9)
+#define GPIO_RB_10 ((32 * 1) + 10)
+#define GPIO_RB_11 ((32 * 1) + 11)
+#define GPIO_RB_12 ((32 * 1) + 12)
+#define GPIO_RB_13 ((32 * 1) + 13)
+#define GPIO_RB_14 ((32 * 1) + 14)
+#define GPIO_RB_15 ((32 * 1) + 15)
+#define GPIO_RB_16 ((32 * 1) + 16)
+#define GPIO_RB_17 ((32 * 1) + 17)
+#define GPIO_RB_18 ((32 * 1) + 18)
+#define GPIO_RB_19 ((32 * 1) + 19)
+
+#define GPIO_RC_0 ((32 * 2) + 0)
+#define GPIO_RC_1 ((32 * 2) + 1)
+#define GPIO_RC_2 ((32 * 2) + 2)
+#define GPIO_RC_3 ((32 * 2) + 3)
+#define GPIO_RC_4 ((32 * 2) + 4)
+#define GPIO_RC_5 ((32 * 2) + 5)
+#define GPIO_RC_6 ((32 * 2) + 6)
+#define GPIO_RC_7 ((32 * 2) + 7)
+#define GPIO_RC_8 ((32 * 2) + 8)
+#define GPIO_RC_9 ((32 * 2) + 9)
+#define GPIO_RC_10 ((32 * 2) + 10)
+#define GPIO_RC_11 ((32 * 2) + 11)
+#define GPIO_RC_12 ((32 * 2) + 12)
+#define GPIO_RC_13 ((32 * 2) + 13)
+#define GPIO_RC_14 ((32 * 2) + 14)
+#define GPIO_RC_15 ((32 * 2) + 15)
+#define GPIO_RC_16 ((32 * 2) + 16)
+#define GPIO_RC_17 ((32 * 2) + 17)
+#define GPIO_RC_18 ((32 * 2) + 18)
+#define GPIO_RC_19 ((32 * 2) + 19)
+#define GPIO_RC_20 ((32 * 2) + 20)
+#define GPIO_RC_21 ((32 * 2) + 21)
+#define GPIO_RC_22 ((32 * 2) + 22)
+#define GPIO_RC_23 ((32 * 2) + 23)
+#define GPIO_RC_24 ((32 * 2) + 24)
+#define GPIO_RC_25 ((32 * 2) + 25)
+#define GPIO_RC_26 ((32 * 2) + 26)
+#define GPIO_RC_27 ((32 * 2) + 27)
+#define GPIO_RC_28 ((32 * 2) + 28)
+#define GPIO_RC_29 ((32 * 2) + 29)
+#define GPIO_RC_30 ((32 * 2) + 30)
+#define GPIO_RC_31 ((32 * 2) + 31)
+
+#define GPIO_RD_0 ((32 * 3) + 0)
+#define GPIO_RD_1 ((32 * 3) + 1)
+#define GPIO_RD_2 ((32 * 3) + 2)
+#define GPIO_RD_3 ((32 * 3) + 3)
+#define GPIO_RD_4 ((32 * 3) + 4)
+#define GPIO_RD_5 ((32 * 3) + 5)
+#define GPIO_RD_6 ((32 * 3) + 6)
+#define GPIO_RD_7 ((32 * 3) + 7)
+#define GPIO_RD_8 ((32 * 3) + 8)
+#define GPIO_RD_9 ((32 * 3) + 9)
+#define GPIO_RD_10 ((32 * 3) + 10)
+#define GPIO_RD_11 ((32 * 3) + 11)
+
+#define GPIO_RE_0 ((32 * 4) + 0)
+#define GPIO_RE_1 ((32 * 4) + 1)
+#define GPIO_RE_2 ((32 * 4) + 2)
+#define GPIO_RE_3 ((32 * 4) + 3)
+#define GPIO_RE_4 ((32 * 4) + 4)
+#define GPIO_RE_5 ((32 * 4) + 5)
+#define GPIO_RE_6 ((32 * 4) + 6)
+#define GPIO_RE_7 ((32 * 4) + 7)
+
+#define GPIO_RF_0 ((32 * 5) + 0)
+#define GPIO_RF_1 ((32 * 5) + 1)
+#define GPIO_RF_2 ((32 * 5) + 2)
+#define GPIO_RF_3 ((32 * 5) + 3)
+#define GPIO_RF_4 ((32 * 5) + 4)
+#define GPIO_RF_5 ((32 * 5) + 5)
+#define GPIO_RF_6 ((32 * 5) + 6)
+#define GPIO_RF_7 ((32 * 5) + 7)
+#define GPIO_RF_8 ((32 * 5) + 8)
+#define GPIO_RF_9 ((32 * 5) + 9)
+#define GPIO_RF_10 ((32 * 5) + 10)
+#define GPIO_RF_11 ((32 * 5) + 11)
+#define GPIO_RF_12 ((32 * 5) + 12)
+#define GPIO_RF_13 ((32 * 5) + 13)
+#define GPIO_RF_14 ((32 * 5) + 14)
+#define GPIO_RF_15 ((32 * 5) + 15)
+
+#define GPIO_RG_0 ((32 * 6) + 0)
+#define GPIO_RG_1 ((32 * 6) + 1)
+#define GPIO_RG_2 ((32 * 6) + 2)
+#define GPIO_RG_3 ((32 * 6) + 3)
+#define GPIO_RG_4 ((32 * 6) + 4)
+#define GPIO_RG_5 ((32 * 6) + 5)
+#define GPIO_RG_6 ((32 * 6) + 6)
+#define GPIO_RG_7 ((32 * 6) + 7)
+#define GPIO_RG_8 ((32 * 6) + 8)
+#define GPIO_RG_9 ((32 * 6) + 9)
+#define GPIO_RG_10 ((32 * 6) + 10)
+#define GPIO_RG_11 ((32 * 6) + 11)
+#define GPIO_RG_12 ((32 * 6) + 12)
+#define GPIO_RG_13 ((32 * 6) + 13)
+#define GPIO_RG_14 ((32 * 6) + 14)
+#define GPIO_RG_15 ((32 * 6) + 15)
+#define GPIO_RG_16 ((32 * 6) + 16)
+#define GPIO_RG_17 ((32 * 6) + 17)
+#define GPIO_RG_18 ((32 * 6) + 18)
+#define GPIO_RG_19 ((32 * 6) + 19)
+#define GPIO_RG_20 ((32 * 6) + 20)
+#define GPIO_RG_21 ((32 * 6) + 21)
+#define GPIO_RG_22 ((32 * 6) + 22)
+#define GPIO_RG_23 ((32 * 6) + 23)
+#define GPIO_RG_24 ((32 * 6) + 24)
+#define GPIO_RG_25 ((32 * 6) + 25)
+#define GPIO_RG_26 ((32 * 6) + 26)
+#define GPIO_RG_27 ((32 * 6) + 27)
+#define GPIO_RG_28 ((32 * 6) + 28)
+#define GPIO_RG_29 ((32 * 6) + 29)
+#define GPIO_RG_30 ((32 * 6) + 30)
+#define GPIO_RG_31 ((32 * 6) + 31)
+
+#define GPIO_RH_0 ((32 * 7) + 0)
+#define GPIO_RH_1 ((32 * 7) + 1)
+#define GPIO_RH_2 ((32 * 7) + 2)
+#define GPIO_RH_3 ((32 * 7) + 3)
+#define GPIO_RH_4 ((32 * 7) + 4)
+#define GPIO_RH_5 ((32 * 7) + 5)
+#define GPIO_RH_6 ((32 * 7) + 6)
+#define GPIO_RH_7 ((32 * 7) + 7)
+#define GPIO_RH_8 ((32 * 7) + 8)
+#define GPIO_RH_9 ((32 * 7) + 9)
+
+#define GPIO_RI_0 ((32 * 8) + 0)
+#define GPIO_RI_1 ((32 * 8) + 1)
+#define GPIO_RI_2 ((32 * 8) + 2)
+#define GPIO_RI_3 ((32 * 8) + 3)
+#define GPIO_RI_4 ((32 * 8) + 4)
+#define GPIO_RI_5 ((32 * 8) + 5)
+#define GPIO_RI_6 ((32 * 8) + 6)
+#define GPIO_RI_7 ((32 * 8) + 7)
+#define GPIO_RI_8 ((32 * 8) + 8)
+#define GPIO_RI_9 ((32 * 8) + 9)
+#define GPIO_RI_10 ((32 * 8) + 10)
+#define GPIO_RI_11 ((32 * 8) + 11)
+#define GPIO_RI_12 ((32 * 8) + 12)
+#define GPIO_RI_13 ((32 * 8) + 13)
+
+/*
+ * The following section defines extra GPIO available to some boards.
+ * These GPIO are generally external to the processor (i.e. SPI/I2C
+ * expander chips).
+ *
+ * Note that these defines show all possible GPIO available, however,
+ * depending on the actual board configuration, some GPIO are not
+ * available for use.
+ */
+#ifdef CONFIG_IP7500MEDIA
+/*
+ * U15
+ */
+#define IP7500MEDIA_U15_BASE (32 * 10)
+#define IP7500MEDIA_IO0 (IP7500MEDIA_U15_BASE + 0)
+#define IP7500MEDIA_IO1 (IP7500MEDIA_U15_BASE + 1)
+#define IP7500MEDIA_IO2 (IP7500MEDIA_U15_BASE + 2)
+#define IP7500MEDIA_IO3 (IP7500MEDIA_U15_BASE + 3)
+#define IP7500MEDIA_IO4 (IP7500MEDIA_U15_BASE + 4)
+#define IP7500MEDIA_IO5 (IP7500MEDIA_U15_BASE + 5)
+#define IP7500MEDIA_IO6 (IP7500MEDIA_U15_BASE + 6)
+#define IP7500MEDIA_IO7 (IP7500MEDIA_U15_BASE + 7)
+
+/*
+ * U16
+ */
+#define IP7500MEDIA_U16_BASE (32 * 11)
+#define IP7500MEDIA_IO8 (IP7500MEDIA_U16_BASE + 0)
+#define IP7500MEDIA_IO9 (IP7500MEDIA_U16_BASE + 1)
+#define IP7500MEDIA_IO10 (IP7500MEDIA_U16_BASE + 2)
+#define IP7500MEDIA_IO11 (IP7500MEDIA_U16_BASE + 3)
+#define IP7500MEDIA_IO12 (IP7500MEDIA_U16_BASE + 4)
+#define IP7500MEDIA_IO13 (IP7500MEDIA_U16_BASE + 5)
+#define IP7500MEDIA_IO14 (IP7500MEDIA_U16_BASE + 6)
+#define IP7500MEDIA_IO15 (IP7500MEDIA_U16_BASE + 7)
+
+/*
+ * U17
+ */
+#define IP7500MEDIA_U17_BASE (32 * 12)
+#define IP7500MEDIA_IO16 (IP7500MEDIA_U17_BASE + 0)
+#define IP7500MEDIA_IO17 (IP7500MEDIA_U17_BASE + 1)
+#define IP7500MEDIA_IO18 (IP7500MEDIA_U17_BASE + 2)
+#define IP7500MEDIA_IO19 (IP7500MEDIA_U17_BASE + 3)
+#define IP7500MEDIA_IO20 (IP7500MEDIA_U17_BASE + 4)
+#define IP7500MEDIA_IO21 (IP7500MEDIA_U17_BASE + 5)
+#define IP7500MEDIA_IO22 (IP7500MEDIA_U17_BASE + 6)
+#define IP7500MEDIA_IO23 (IP7500MEDIA_U17_BASE + 7)
+
+/*
+ * U18
+ */
+#define IP7500MEDIA_U18_BASE (32 * 13)
+#define IP7500MEDIA_IO24 (IP7500MEDIA_U18_BASE + 0)
+#define IP7500MEDIA_IO25 (IP7500MEDIA_U18_BASE + 1)
+#define IP7500MEDIA_IO26 (IP7500MEDIA_U18_BASE + 2)
+#define IP7500MEDIA_IO27 (IP7500MEDIA_U18_BASE + 3)
+#define IP7500MEDIA_IO28 (IP7500MEDIA_U18_BASE + 4)
+#define IP7500MEDIA_IO29 (IP7500MEDIA_U18_BASE + 5)
+#define IP7500MEDIA_IO30 (IP7500MEDIA_U18_BASE + 6)
+#define IP7500MEDIA_IO31 (IP7500MEDIA_U18_BASE + 7)
+#endif
+
+#ifdef CONFIG_IP7145DPF
+/*
+ * U48
+ */
+#define IP7145DPF_U48_BASE (32 * 10)
+#define IP7145DPF_IO0 (IP7145DPF_U48_BASE + 0)
+#define IP7145DPF_IO1 (IP7145DPF_U48_BASE + 1)
+#define IP7145DPF_IO2 (IP7145DPF_U48_BASE + 2)
+#define IP7145DPF_IO3 (IP7145DPF_U48_BASE + 3)
+#define IP7145DPF_IO4 (IP7145DPF_U48_BASE + 4)
+#define IP7145DPF_IO5 (IP7145DPF_U48_BASE + 5)
+#define IP7145DPF_IO6 (IP7145DPF_U48_BASE + 6)
+#define IP7145DPF_IO7 (IP7145DPF_U48_BASE + 7)
+
+/*
+ * U72
+ */
+#define IP7145DPF_U72_BASE (32 * 11)
+#define IP7145DPF_IOB0 (IP7145DPF_U72_BASE + 0)
+#define IP7145DPF_IOB1 (IP7145DPF_U72_BASE + 1)
+#define IP7145DPF_IOB2 (IP7145DPF_U72_BASE + 2)
+#define IP7145DPF_IOB3 (IP7145DPF_U72_BASE + 3)
+#define IP7145DPF_IOB4 (IP7145DPF_U72_BASE + 4)
+#define IP7145DPF_IOB5 (IP7145DPF_U72_BASE + 5)
+#define IP7145DPF_IOB6 (IP7145DPF_U72_BASE + 6)
+#define IP7145DPF_IOB7 (IP7145DPF_U72_BASE + 7)
+#endif
+
+#include <asm-generic/gpio.h>
+
+/*
+ * The following macros bypass gpiolib to generate direct references
+ * to the port registers. These assume, minimally, that either
+ * gpio_direction_input() or gpio_direction_output() have already been
+ * called to setup the pin direction and to enable the pin function to
+ * be gpio. These macros generate the hardware port address based on
+ * the assumption that all ports are 32 bits wide (even though we know
+ * they are not). This is so we can efficiently turn pin numbers into
+ * port addresses without a lookup.
+ *
+ * These operations must be done in one instruction to prevent clobbering
+ * other thread's accesses to the same port.
+ */
+#define UBICOM32_GPIO_ENABLE(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_DISABLE(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_INPUT(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_OUTPUT(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_TOGGLE(pin) \
+ do { \
+ asm volatile ("xor.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_HIGH(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_LOW(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN(pin, val) \
+ if ( val ) { \
+ UBICOM32_GPIO_SET_PIN_HIGH(pin); \
+ } else { \
+ UBICOM32_GPIO_SET_PIN_LOW(pin); \
+ }
+
+#define UBICOM32_GPIO_GET_PIN(pin) \
+ (0 != (UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_in \
+ & gpio_bit(pin)))
+
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
+ return UBICOM32_GPIO_GET_PIN(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
+ {
+ UBICOM32_GPIO_SET_PIN(gpio, value);
+ }
+ else
+ {
+ __gpio_set_value(gpio, value);
+ }
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+#if defined(IP5000) || defined(IP5000_REV2)
+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
+ return 25;
+ else
+ return -ENXIO;
+
+#elif defined(IP7000) || defined(IP7000_REV2)
+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
+ return 44 + (gpio - GPIO_RA_4);
+ else
+ return -ENXIO;
+
+#else
+ return -ENXIO;
+
+#endif
+}
+
+static inline int irq_to_gpio(unsigned gpio)
+{
+ return -ENXIO;
+}
+
+extern struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio);
+
+extern int __init ubi_gpio_init(void);
+
+#endif /* _ASM_UBICOM32_GPIO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/hardirq.h linux-2.6.28.10/arch/ubicom32/include/asm/hardirq.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/hardirq.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/hardirq.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/hardirq.h
+ * Definition of ack_bad_irq() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_HARDIRQ_H
+#define _ASM_UBICOM32_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU. For Ubicom32, we have 64 IRQ sources.
+ */
+#define HARDIRQ_BITS 6
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_UBICOM32_HARDIRQ_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/hw_irq.h linux-2.6.28.10/arch/ubicom32/include/asm/hw_irq.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/hw_irq.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/hw_irq.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,31 @@
+/*
+ * arch/ubicom32/include/asm/hw_irq.h
+ * Ubicom32 architecture APIC support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_HW_IRQ_H
+#define _ASM_UBICOM32_HW_IRQ_H
+
+#endif /* _ASM_UBICOM32_HW_IRQ_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ioctl.h linux-2.6.28.10/arch/ubicom32/include/asm/ioctl.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ioctl.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ioctl.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/ioctl.h
+ * Generic ioctl.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IOCTL_H
+#define _ASM_UBICOM32_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_UBICOM32_IOCTL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ioctls.h linux-2.6.28.10/arch/ubicom32/include/asm/ioctls.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ioctls.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ioctls.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,111 @@
+/*
+ * arch/ubicom32/include/asm/ioctls.h
+ * Definitions of ioctls for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IOCTLS_H
+#define _ASM_UBICOM32_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_UBICOM32_IOCTLS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/io.h linux-2.6.28.10/arch/ubicom32/include/asm/io.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/io.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/io.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,313 @@
+/*
+ * arch/ubicom32/include/asm/io.h
+ * I/O memory accessor functions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IO_H
+#define _ASM_UBICOM32_IO_H
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+ return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#ifndef CONFIG_PCI
+#define readb(addr) \
+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+#else /*CONFIG_PCI */
+
+#define PCI_CPU_REG_BASE (0x00000000UL) /* taking lower 2GB space */
+#define PCI_DEV_REG_BASE (0x80000000UL)
+
+#if PCI_CPU_REG_BASE > PCI_DEV_REG_BASE
+#define IS_PCI_ADDRESS(x) (((unsigned int)(x)&(PCI_CPU_REG_BASE)) == 0)
+#else
+#define IS_PCI_ADDRESS(x) ((unsigned int)(x)&(PCI_DEV_REG_BASE))
+#endif
+
+extern unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr);
+extern unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr);
+extern unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr);
+extern void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr);
+extern void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr);
+extern void ubi32_pci_write_u8(unsigned char val, const volatile void __iomem *addr);
+
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u8(addr);
+ else
+ return (unsigned char)(*(volatile unsigned char *)addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u16(addr);
+ else
+ return (unsigned short)(*(volatile unsigned short *)addr);
+}
+
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u32(addr);
+ else
+ return (unsigned int)(*(volatile unsigned int *)addr);
+}
+
+static inline void writel(unsigned int val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u32(val, addr);
+ else
+ *(volatile unsigned int *)addr = val;
+}
+
+static inline void writew(unsigned short val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u16(val, addr);
+ else
+ *(volatile unsigned short *)addr = val;
+}
+
+static inline void writeb(unsigned char val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u8(val, addr);
+ else
+ *(volatile unsigned char *)addr = val;
+}
+#endif
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+#ifndef CONFIG_PCI
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+#else
+extern void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len);
+extern void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len);
+extern void memset_io(volatile void __iomem *addr, int val, size_t count);
+#endif
+
+#define inb(addr) readb(addr)
+#define inw(addr) readw(addr)
+#define inl(addr) readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#ifndef CONFIG_PCI
+#define ioread8_rep(a,d,c) insb(a,d,c)
+#define ioread16_rep(a,d,c) insw(a,d,c)
+#define ioread32_rep(a,d,c) insl(a,d,c)
+#define iowrite8_rep(a,s,c) outsb(a,s,c)
+#define iowrite16_rep(a,s,c) outsw(a,s,c)
+#define iowrite32_rep(a,s,c) outsl(a,s,c)
+#else
+extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
+#endif
+
+
+#ifndef CONFIG_PCI
+#define ioread8(X) readb(X)
+#define ioread16(X) readw(X)
+#define ioread32(X) readl(X)
+#define iowrite8(val,X) writeb(val,X)
+#define iowrite16(val,X) writew(val,X)
+#define iowrite32(val,X) writel(val,X)
+#else /*CONFIG_PCI */
+extern unsigned char ioread8(void __iomem *addr);
+extern unsigned short ioread16(void __iomem *addr);
+extern unsigned int ioread32(void __iomem *addr);
+extern void iowrite8(unsigned char val, void __iomem *addr);
+extern void iowrite16(unsigned short val, void __iomem *addr);
+extern void iowrite32(unsigned int val, void __iomem *addr);
+#endif /* CONFIG_PCI */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+#define ioport_map(port, nr) ((void __iomem*)(port))
+#define ioport_unmap(addr)
+
+
+/* Pages to physical address... */
+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_IO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ip5000-asm.h linux-2.6.28.10/arch/ubicom32/include/asm/ip5000-asm.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ip5000-asm.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ip5000-asm.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,156 @@
+/*
+ * arch/ubicom32/include/asm/ip5000-asm.h
+ * Instruction macros for the IP5000.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_IP5000_ASM_H
+#define _ASM_UBICOM32_IP5000_ASM_H
+
+#if !defined(__LINKER__)
+
+#if defined(__ASSEMBLY__)
+.macro cycles quant
+.if (\quant) == 1
+ nop
+.else
+.if (((\quant) + 3) / 8) > 0
+.rept (((\quant) + 3) / 8)
+ jmpt.f .+4
+.endr
+.endif
+.if ((((\quant) + 3) % 8) / 4) > 0
+ jmpt.t .+4
+.endif
+.endif
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro cycles quant \n\
+.if (\\quant) == 1 \n\
+ nop \n\
+.else \n\
+.if (((\\quant) + 3) / 8) > 0 \n\
+.rept (((\\quant) + 3) / 8) \n\
+ jmpt.f .+4 \n\
+.endr \n\
+.endif \n\
+.if ((((\\quant) + 3) % 8) / 4) > 0 \n\
+ jmpt.t .+4 \n\
+.endif \n\
+.endif \n\
+.endm \n\
+");
+#endif
+
+
+#if defined(__ASSEMBLY__)
+.macro pipe_flush cyc
+ cycles 11 - (\cyc)
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro pipe_flush cyc \n\
+ cycles 11 - (\\cyc) \n\
+.endm \n\
+");
+
+#endif
+
+#if defined(__ASSEMBLY__)
+.macro setcsr_flush cyc
+ cycles 5 - (\cyc)
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro setcsr_flush cyc \n\
+ cycles 5 - (\\cyc) \n\
+.endm \n\
+");
+#endif
+
+/*
+ * Macros for prefetch (using miss-aligned memory write)
+ */
+#if defined(__ASSEMBLY__)
+
+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length
+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
+ bset \Ascratch, \Aaddress, #0 ; force a miss-aligned address
+ jmpt.t .+4 ; delay for both address setup and trap disable
+ move.4 (\Ascratch), #0
+ .if (\length > 32)
+ move.4 32(\Ascratch), #0
+ .endif
+ .if (\length > 64)
+ move.4 64(\Ascratch), #0
+ .endif
+ .if (\length > 96)
+ move.4 96(\Ascratch), #0
+ .endif
+ .if (\length > 128)
+ invalid_instruction ; maximum pre-fetch size is 4 cache lines
+ .endif
+ bset MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
+.endm
+
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length \n\
+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) \n\
+ bset \\Ascratch, \\Aaddress, #0 ; force a miss-aligned address \n\
+ jmpt.t .+4 ; delay for both address setup and trap disable \n\
+ move.4 (\\Ascratch), #0 \n\
+ .if (\\length > 32) \n\
+ move.4 32(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 64) \n\
+ move.4 64(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 96) \n\
+ move.4 96(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 128) \n\
+ invalid_instruction ; maximum pre-fetch size is 4 cache lines \n\
+ .endif \n\
+ bset MT_TRAP_EN, MT_TRAP_EN, #(\\thread_num) \n\
+.endm \n\
+");
+#endif
+
+#endif /* !defined(__LINKER__) */
+#endif /* defined _ASM_UBICOM32_IP5000_ASM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ip5000.h linux-2.6.28.10/arch/ubicom32/include/asm/ip5000.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ip5000.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ip5000.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,860 @@
+/*
+ * arch/ubicom32/include/asm/ip5000.h
+ * Specific details for the Ubicom IP5000 processor.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_IP5000_H
+#define _ASM_UBICOM32_IP5000_H
+
+/*
+ * Inline assembly define
+ */
+#define S(arg) #arg
+#define D(arg) S(arg)
+
+/*
+ * Assembler include file
+ */
+#include <asm/ip5000-asm.h>
+
+/*
+ * Timing
+ */
+#define JMPT_PENALTY 3
+#define JMPF_PENALTY 7
+#define RET_PENALTY 7
+
+/*
+ * Threads
+ */
+#if defined(IP5000) || defined(IP5000_REV2)
+#define THREAD_COUNT 10
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define THREAD_COUNT 12
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+/*
+ * Arch
+ */
+#if defined(IP5000) || defined(IP5000_REV2)
+#define UBICOM32_ARCH_VERSION 3
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define UBICOM32_ARCH_VERSION 4
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+/*
+ * Memory Size
+ */
+#define OCM_SECTOR_SIZE 0x00008000 /* 32K */
+
+#if defined(IP5000) || defined(IP5000_REV2)
+#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy jump to/from SDRAM */
+#define OCMEND (OCMSTART + OCMSIZE)
+#define SDRAMSTART 0x40000000
+#define FLASHSTART 0x60000000
+
+/*
+ * Registers
+ */
+#define ROSR_INT (1 << 0)
+
+/* Interrupts */
+#define INT_CHIP(reg, bit) (((reg) << 5) | (bit))
+#define INT_REG(interrupt) (((interrupt) >> 5) * 4)
+#define INT_SET(interrupt) 0x0114 + INT_REG(interrupt)
+#define INT_CLR(interrupt) 0x0124 + INT_REG(interrupt)
+#define INT_STAT(interrupt) 0x0104 + INT_REG(interrupt)
+#define INT_MASK(interrupt) 0x00C0 + INT_REG(interrupt)
+#define INT_BIT(interrupt) ((interrupt) & 0x1F)
+#define INT_BIT_MASK(interrupt) (1 << INT_BIT(interrupt))
+
+/*
+ * The LOCK_INT and THREAD_INT are used to wake up corresponding thread. They are sharing
+ * the same set of SW interrupt resource.
+ *
+ * LOCK_INT(n): One SW INT per NRT thread that can participate lock operation.
+ * The threads that can participate lock are application threads and DSR thread.
+ * (Lock locks - numbers are hard-coded in lock.h)
+ * THREAD_INT(n): One SW INT per HRT thread for wake up trigger.
+ */
+#define LOCK_INT(thread) INT_CHIP(0, (thread))
+#define THREAD_INT(thread) INT_CHIP(0, (thread))
+
+/*
+ * The SYSTEM_INT and DSR_INT are sharing the same set of SW interrupt resource.
+ *
+ * SYSTEM_INT(n): One SW INT per NRT threads (application threads) as system queue interrupt,
+ * and for DSR as self-trigger interrupt.
+ * (The application threads include at least thread 0)
+ * DSR_INT(n): One SW INT per HRT thread to request DSR service.
+ */
+#define SYSTEM_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
+#define DSR_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
+
+/* GLOBAL_CTRL */
+#define GLOBAL_CTRL_TRAP_RST_EN (1 << 9)
+#define GLOBAL_CTRL_AERROR_RST_EN (1 << 8)
+#define GLOBAL_CTRL_MT_MIN_DELAY(x) ((x) << 3)
+#define GLOBAL_CTRL_HRT_BANK_SELECT (1 << 2)
+#define GLOBAL_CTRL_INT_EN (1 << 0)
+
+/*
+ * HRT Tables
+ */
+#define HRT_TABLE0_BASE 0x0800
+#define HRT_TABLE1_BASE 0x0900
+#define HRT_TABLE_SIZE 64
+
+/*
+ * Break Point Trap Register
+ */
+#define ASYNCERROR_INT INT_CHIP(0, 31)
+#define BREAKPOINT_INT INT_CHIP(1, 31)
+
+/*
+ * Port interrupts
+ * The non-existing FIFO INTs are mapped to INT2 for the ports.
+ */
+#define IO_PORT_PTR_TO_NUM(port) (((port) & 0x0000ffff) >> 12)
+#define RX_FIFO_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 26) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 24) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 27) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 16) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 21) : \
+ INT_CHIP(1, 15))))))))))
+#define TX_FIFO_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 24) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 27) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 28) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 17) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 22) : \
+ INT_CHIP(1, 15))))))))))
+#define PORT_OTHER_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 28) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 26) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 18) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 23) : \
+ INT_CHIP(1, 15))))))))))
+
+/*
+ * On Chip Peripherals Base.
+ */
+#define OCP_BASE 0x01000000
+#define OCP_GENERAL 0x000
+#define OCP_TIMERS 0x100
+#define OCP_TRNG 0x200 /* True Random Number Generator Control Reigsters */
+#define OCP_DEBUG 0x300
+#define OCP_SECURITY 0x400
+#define OCP_ICCR 0x500 /* I-Cache Control Registers */
+#define OCP_DCCR 0x600 /* D-Cache Control Registers */
+#define OCP_OCMC 0x700 /* On Chip Memory Control Registers */
+#define OCP_STATISTICS 0x800 /* Statistics Counters */
+#define OCP_MTEST 0x900 /* Memory Test Registers */
+#define OCP_MCFG 0xa00 /* Memory Configuration Registers -- IP7000 only */
+#define OCP_DEBUG_INST 0x000 /* Up to 16M */
+
+/*
+ * General Configuration Registers (PLL)
+ */
+#define GENERAL_CFG_BASE (OCP_BASE + OCP_GENERAL)
+#define GEN_CLK_CORE_CFG 0x00
+#define GEN_CLK_IO_CFG 0x04
+#define GEN_CLK_DDR_CFG 0x08
+#define GEN_CLK_DDRDS_CFG 0x0c
+#define GEN_CLK_SLIP_CLR 0x10
+#define GEN_CLK_SLIP_START 0x14
+#define GEN_CLK_SERDES_SEL 0x18 /* IP7000 only */
+#define GEN_CLK_DDR_CFG2 0x1c /* IP7000 only */
+#define GEN_DDR_CAL_CTRL 0x30 /* IP5000 only */
+#define GEN_DDR_CAL_STAT 0x34 /* IP5000 only */
+#define GEN_USB_DFT_CTRL 0x38 /* IP5000 only */
+#define GEN_USB_DFT_STAT 0x3c /* IP5000 only */
+#define GEN_USB_PHY_CFG 0x40 /* IP7000 only */
+#define GEN_USB_PHY_TEST 0x44 /* IP7000 only */
+#define GEN_USB_PHY_STAT 0x48 /* IP7000 only */
+#define GEN_SW_RESET 0x80
+#define GEN_RESET_REASON 0x84
+#define GEN_BOND_CFG 0x88
+#define GEN_IO_PU_CFG 0x8c
+#define GEN_MEM_RM_CFG 0x90
+#define GEN_IO_CONFIG 0x94
+
+#define GEN_CLK_PLL_SECURITY_BIT_NO 31
+#define GEN_CLK_PLL_SECURITY (1 << GEN_CLK_PLL_SECURITY_BIT_NO)
+#define GEN_CLK_PLL_ENSAT (1 << 30)
+#define GEN_CLK_PLL_FASTEN (1 << 29)
+#define GEN_CLK_PLL_NR(v) (((v) - 1) << 23)
+#define GEN_CLK_PLL_NF(v) (((v) - 1) << 11)
+#define GEN_CLK_PLL_OD(v) (((v) - 1) << 8)
+#define GEN_CLK_PLL_RESET (1 << 7)
+#define GEN_CLK_PLL_BYPASS (1 << 6)
+#define GEN_CLK_PLL_POWERDOWN (1 << 5)
+#define GEN_CLK_PLL_SELECT (1 << 4)
+
+#define GEN_GET_CLK_PLL_NR(v) ((((v) >> 23) & 0x003f) + 1)
+#define GEN_GET_CLK_PLL_NF(v) ((((v) >> 11) & 0x0fff) + 1)
+#define GEN_GET_CLK_PLL_OD(v) ((((v) >> 8) & 0x7) + 1)
+
+
+#define RESET_FLAG_DST_MEM_ERROR (1 << 18)
+#define RESET_FLAG_SRC1_MEM_ERROR (1 << 17)
+#define RESET_FLAG_WRITE_ADDR (1 << 16)
+#define RESET_FLAG_DST_SYNC_ERROR (1 << 15)
+#define RESET_FLAG_SRC1_SYNC_ERROR (1 << 14)
+#define RESET_FLAG_DST_ALGN_ERROR (1 << 13)
+#define RESET_FLAG_SRC1_ALGN_ERROR (1 << 12)
+#define RESET_FLAG_DST_ADDR_ERROR (1 << 11)
+#define RESET_FLAG_SRC1_ADDR_ERROR (1 << 10)
+#define RESET_FLAG_ILLEGAL_INST (1 << 9)
+#define RESET_FLAG_INST_SYNC_ERROR (1 << 8)
+#define RESET_FLAG_INST_ADDR_ERROR (1 << 7)
+#define RESET_FLAG_DATA_PORT_ERROR (1 << 6)
+#define RESET_FLAG_INST_PORT_ERROR (1 << 5)
+#define RESET_FLAG_SW_RESET (1 << 4)
+#define RESET_FLAG_DEBUG (1 << 3)
+#define RESET_FLAG_WATCHDOG (1 << 2)
+#define RESET_FLAG_POWER_ON (1 << 1)
+#define RESET_FLAG_EXTERNAL (1 << 0)
+
+/*
+ * Timer block
+ */
+#define TIMER_BASE (OCP_BASE + OCP_TIMERS)
+#define TIMER_MPTVAL 0x00
+#define TIMER_RTCOM 0x04
+#define TIMER_TKEY 0x08
+#define TIMER_WDCOM 0x0c
+#define TIMER_WDCFG 0x10
+#define TIMER_SYSVAL 0x14
+#define TIMER_SYSCOM(tmr) (0x18 + (tmr) * 4)
+#define TIMER_TRN_CFG 0x100
+#define TIMER_TRN 0x104
+
+#define TIMER_COUNT 10
+#define TIMER_INT(tmr) INT_CHIP(1, (tmr))
+#define TIMER_TKEYVAL 0xa1b2c3d4
+#define TIMER_WATCHDOG_DISABLE 0x4d3c2b1a
+#define TIMER_TRN_CFG_ENABLE_OSC 0x00000007
+
+#ifndef __ASSEMBLY__
+/*
+ * ubicom32_io_timer
+ */
+struct ubicom32_io_timer {
+ volatile u32_t mptval;
+ volatile u32_t rtcom;
+ volatile u32_t tkey;
+ volatile u32_t wdcom;
+ volatile u32_t wdcfg;
+ volatile u32_t sysval;
+ volatile u32_t syscom[TIMER_COUNT];
+ volatile u32_t reserved[64 - 6 - TIMER_COUNT]; // skip all the way to OCP-TRNG section
+ volatile u32_t rsgcfg;
+ volatile u32_t trn;
+};
+
+#define UBICOM32_IO_TIMER ((struct ubicom32_io_timer *)TIMER_BASE)
+#endif
+
+#define UBICOM32_VECTOR_TO_TIMER_INDEX(vector) (vector - TIMER_INT(0))
+
+/*
+ * OCP-Debug Module (Mailbox)
+ */
+#define ISD_MAILBOX_BASE (OCP_BASE + OCP_DEBUG)
+#define ISD_MAILBOX_IN 0x00
+#define ISD_MAILBOX_OUT 0x04
+#define ISD_MAILBOX_STATUS 0x08
+
+#define ISD_MAILBOX_INT INT_CHIP(1, 30)
+
+#define ISD_MAILBOX_STATUS_IN_FULL (1 << 31)
+#define ISD_MAILBOX_STATUS_IN_EMPTY (1 << 30)
+#define ISD_MAILBOX_STATUS_OUT_FULL (1 << 29)
+#define ISD_MAILBOX_STATUS_OUT_EMPTY (1 << 28)
+
+/*
+ * OCP-Security
+ */
+#define SECURITY_BASE (OCP_BASE + OCP_SECURITY)
+#define SECURITY_BASE_EFFECTIVE_ADDRESS (SECURITY_BASE >> 7) // To load the base address in a single instruction
+#define SECURITY_CTRL 0x00
+#define SECURITY_CTRL_BYTE_OFFSET(x) ((x) << 16)
+#define SECURITY_CTRL_KEY_SIZE(x) ((x) << 8)
+#define SECURITY_CTRL_HASH_ALG_NONE (0 << 4)
+#define SECURITY_CTRL_HASH_ALG_MD5 (1 << 4)
+#define SECURITY_CTRL_HASH_ALG_SHA1 (2 << 4)
+#define SECURITY_CTRL_CBC (1 << 3)
+#define SECURITY_CTRL_CIPHER_ALG_AES (0 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_NONE (1 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_DES (2 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_3DES (3 << 1)
+#define SECURITY_CTRL_ENCIPHER (1 << 0)
+#define SECURITY_CTRL_DECIPHER (0 << 0)
+#define SECURITY_STAT 0x04
+#define SECURITY_STAT_BUSY (1 << 0)
+#define SECURITY_KEY_VALUE(x) (0x10 + (x) * 4)
+#define SECURITY_KEY_IN(x) (0x30 + (x) * 4)
+#define SECURITY_KEY_OUT(x) (0x50 + (x) * 4)
+#define SECURITY_KEY_HASH(x) (0x70 + (x) * 4)
+
+/*
+ * OCP-ICCR
+ */
+#define ICCR_BASE (OCP_BASE + OCP_ICCR)
+#define ICACHE_TOTAL_SIZE 16384 /* in bytes */
+
+/*
+ * OCP-DCCR
+ */
+#define DCCR_BASE (OCP_BASE + OCP_DCCR)
+#if defined(IP5000) || defined(IP5000_REV2)
+#define DCACHE_TOTAL_SIZE 8192 /* in bytes */
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define DCACHE_TOTAL_SIZE 16384 /* in bytes */
+#endif
+
+#if defined(IP5000) || defined(IP5000_REV2) || defined(IP7000) || defined(IP7000_REV2)
+#define DCACHE_WRITE_QUEUE_LENGTH 6
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+#define CACHE_LINE_SIZE 32 /* in bytes */
+
+#define CCR_ADDR 0x00
+#define CCR_RDD 0x04
+#define CCR_WRD 0x08
+#define CCR_STAT 0x0c
+#define CCR_CTRL 0x10
+
+#define CCR_STAT_MCBE 0
+#define CCR_STAT_WIDEL 1 /* D-cache only */
+
+#define CCR_CTRL_DONE 0
+#define CCR_CTRL_RESET 2
+#define CCR_CTRL_VALID 3
+#define CCR_CTRL_RD_DATA (1 << 4)
+#define CCR_CTRL_RD_TAG (2 << 4)
+#define CCR_CTRL_WR_DATA (3 << 4)
+#define CCR_CTRL_WR_TAG (4 << 4)
+#define CCR_CTRL_INV_INDEX (5 << 4)
+#define CCR_CTRL_INV_ADDR (6 << 4)
+#define CCR_CTRL_FLUSH_INDEX (7 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_INV_INDEX (8 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_ADDR (9 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_INV_ADDR (10 << 4) /* D-cache only */
+
+/*
+ * OCP-OCMC
+ */
+#define OCMC_BASE (OCP_BASE + OCP_OCMC)
+#define OCMC_BANK_MASK 0x00
+#define OCMC_BIST_CNTL 0x04 /* IP5000 only */
+#define OCMC_BIST_STAT 0x08 /* IP5000 only */
+
+#define OCMC_BANK_PROG(n) ((1<<(n))-1)
+
+#define OCMC_BIST_WRCK (1 << 7)
+#define OCMC_BIST_RESET (1 << 5)
+#define OCMC_BIST_SMART (1 << 4)
+#define OCMC_BIST_RUN (1 << 3)
+#define OCMC_BIST_REPAIR (1 << 2)
+
+#define OCMC_BIST_READY (1 << 3)
+#define OCMC_BIST_FAIL (1 << 2)
+
+/*
+ * OCP-STATISTICS
+ */
+#define STATISTICS_BASE (OCP_BASE + OCP_STATISTICS)
+#define STAT_COUNTER_CTRL(n) ((n)*8)
+#define STAT_COUNTER(n) ((n)*8 + 4)
+
+#define STAT_EVENT_MP_INST 0
+#define STAT_EVENT_OCM_ACCESS 4
+#define STAT_EVENT_OCM_REQ 5
+#define STAT_EVENT_IC_REQ_INVAL 13
+#define STAT_EVENT_IC_MISS_INVAL 14
+#define STAT_EVENT_IC_REQ_INVAL_NACK 15
+#define STAT_EVENT_IC_REQ_VAL 16
+#define STAT_EVENT_IC_MISS_VAL 17
+#define STAT_EVENT_IC_REQ_VAL_NACK 18
+#define STAT_EVENT_IC_MISS_Q 19
+#define STAT_EVENT_DC_RD_REQ 20
+#define STAT_EVENT_DC_RD_MISS 21
+#define STAT_EVENT_DC_WR_REQ 22
+#define STAT_EVENT_DC_WR_MISS 23
+#define STAT_EVENT_DC_MISS_Q 24
+#define STAT_EVENT_DC_WB_FULL 25
+#define STAT_EVENT_DC_REQ_NACK 26
+#define STAT_EVENT_DC_CORE_REQ 27
+#define STAT_EVENT_DC_MISS 28
+#define STAT_EVENT_DC_EVICT 29
+#define STAT_EVENT_TRUE 30
+#define STAT_EVENT_FALSE 31
+
+/*
+ * OCP_MTEST
+ */
+#define MTEST_BASE (OCP_BASE + OCP_MTEST)
+#define MTEST_ADDR 0x00
+#define MTEST_WR 0x04
+#define MTEST_RD 0x08
+#define MTEST_CTRL 0x0c
+
+/*
+ * OCP_MCFG (IP7000 only)
+ */
+#define MCFG_BASE (OCP_BASE + OCP_MCFG)
+#define MCFG_CTRL 0x00
+#define MCFG_WCFG 0x04
+#define MCFG_RCFG 0x08
+
+/*
+ * Port registers
+ */
+#define IO_BASE 0x02000000
+#define RA (IO_BASE + 0x00000000)
+#define RB (IO_BASE + 0x00001000)
+#define RC (IO_BASE + 0x00002000)
+#define RD (IO_BASE + 0x00003000)
+#define RE (IO_BASE + 0x00004000)
+#define RF (IO_BASE + 0x00005000)
+#define RG (IO_BASE + 0x00006000)
+#define RH (IO_BASE + 0x00007000)
+#define RI (IO_BASE + 0x00008000)
+#define RJ (IO_BASE + 0x00009000)
+#define RLATCH (IO_BASE + 0x00ff0000) // For latched output only
+#define IO_PORT_BR_OFFSET 0x00000800
+
+/*
+ * General I/O Register Map (per port)
+ */
+#define IO_FUNC 0x00
+#define IO_GPIO_CTL 0x04
+#define IO_GPIO_OUT 0x08
+#define IO_GPIO_IN 0x0C
+#define IO_INT_STATUS 0x10
+#define IO_INT_MASK 0x14
+#define IO_INT_SET 0x18
+#define IO_INT_CLR 0x1C
+#define IO_TX_FIFO 0x20
+#define IO_TX_FIFO_HI 0x24
+#define IO_RX_FIFO 0x28
+#define IO_RX_FIFO_HI 0x2c
+#define IO_CTL0 0x30
+#define IO_CTL1 0x34
+#define IO_CTL2 0x38
+#define IO_STATUS0 0x3c
+#define IO_STATUS1 0x40
+#define IO_STATUS2 0x44
+#define IO_FIFO_WATER 0x48
+#define IO_FIFO_LEVEL 0x4c
+#define IO_GPIO_MASK 0x50
+
+#define IO_FUNC_FUNCTION_RESET(func) ((1 << ((func) - 1)) << 4) /* Function 0 doesn't need reset */
+#define IO_FUNC_RX_FIFO (1 << 3)
+#define IO_FUNC_SELECT(func) ((func) << 0)
+
+/*
+ * External interrupt pins.
+ */
+#define EXT_INT_IO_BIT(pin) ((pin) + 5) // Interrupt pin number -> I/O INT bit
+#define EXT_INT_RISING_EDGE(pin) (0x2 << (2*(pin) + 7))
+#define EXT_INT_FALLING_EDGE(pin) (0x1 << (2*(pin) + 7))
+
+/*
+ * Flash
+ */
+#define IO_XFL_BASE RA
+
+#define IO_XFL_INT_START (1 << 16)
+#define IO_XFL_INT_ERR (1 << 8)
+#define IO_XFL_INT_DONE (1 << 0)
+
+#define IO_XFL_CTL0_MASK (0xffe07fff)
+#define IO_XFL_CTL0_RD_CMD(cmd) (((cmd) & 0xff) << 24)
+#define IO_XFL_CTL0_RD_DUMMY(n) (((n) & 0x7) << 21)
+#define IO_XFL_CTL0_CLK_WIDTH(core_cycles) ((((core_cycles) + 1) & 0x7e) << 8) /* must be even number */
+#define IO_XFL_CTL0_CE_WAIT(spi_cycles) (((spi_cycles) & 0x3f) << 2)
+#define IO_XFL_CTL0_MCB_LOCK (1 << 1)
+#define IO_XFL_CTL0_ENABLE (1 << 0)
+#define IO_XFL_CTL0_FAST_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(0xb) | IO_XFL_CTL0_RD_DUMMY(1) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
+#define IO_XFL_CTL0_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(3) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
+
+#define IO_XFL_CTL1_MASK (0xc0003fff)
+#define IO_XFL_CTL1_FC_INST(inst) (((inst) & 0x3) << 30)
+#define IO_XFL_CTL1_FC_DATA(n) (((n) & 0x3ff) << 4)
+#define IO_XFL_CTL1_FC_DUMMY(n) (((n) & 0x7) << 1)
+#define IO_XFL_CTL1_FC_ADDR (1 << 0)
+
+#define IO_XFL_CTL2_FC_CMD(cmd) (((cmd) & 0xff) << 24)
+#define IO_XFL_CTL2_FC_ADDR(addr) ((addr) & 0x00ffffff) /* Only up to 24 bits */
+
+#define IO_XFL_STATUS0_MCB_ACTIVE (1 << 0)
+#define IO_XFL_STATUS0_IOPCS_ACTIVE (1 << 1)
+
+/*
+ * SDRAM
+ */
+#define IO_SDRAM_DATA_BASE RG
+#define IO_SDRAM_CNTL_BASE RH
+
+#define IO_SDRAM_CTRL0_EN_REF (1 << 0)
+
+/*
+ * Port function code (common fucntion codes for all I/O ports)
+ */
+#define IO_PORTX_FUNC_GPIO 0x00
+#define IO_PORTX_FUNC_XFL 0x01
+#define IO_PORTX_FUNC_PCI 0x01
+#define IO_PORTX_FUNC_SERDES 0x01
+#define IO_PORTX_FUNC_GMII 0x01
+#define IO_PORTX_FUNC_DDR 0x01
+#define IO_PORTX_FUNC_PCIX 0x01
+#define IO_PORTX_FUNC_USB2_0 0x01
+#define IO_PORTX_FUNC_GPIO_INT_CLK 0x02
+#define IO_PORTX_FUNC_PLIO 0x02
+#define IO_PORTX_FUNC_GPIO_INT 0x03
+#define IO_PORTX_FUNC_MII 0x03
+
+/*
+ * Port 0
+ */
+#define IO_PORT0_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT0_FUNC_XFL_INT_CLK IO_PORTX_FUNC_XFL // Default mode after reset
+#define IO_PORT0_FUNC_GPIO_INT_CLK IO_PORTX_FUNC_GPIO_INT_CLK
+#define IO_PORT0_FUNC_GPIO_INT IO_PORTX_FUNC_GPIO_INT
+
+/*
+ * Port 1
+ */
+#define IO_PORT1_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT1_FUNC_PCI IO_PORTX_FUNC_PCI // PCI control
+#define IO_PORT1_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
+
+/*
+ * Port 2
+ */
+#define IO_PORT2_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT2_FUNC_PCI IO_PORTX_FUNC_PCI // PCI data I/O
+#define IO_PORT2_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+
+/*
+ * Port 3
+ */
+#define IO_PORT3_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT3_FUNC_SERDES IO_PORTX_FUNC_SERDES
+#define IO_PORT3_FUNC_PLIO IO_PORTX_FUNC_PLIO
+
+/*
+ * Port 4
+ */
+#define IO_PORT4_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT4_FUNC_SERDES IO_PORTX_FUNC_SERDES
+#define IO_PORT4_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+#define IO_PORT4_FUNC_MII IO_PORTX_FUNC_MII
+
+/*
+ * Port 5
+ */
+#define IO_PORT5_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT5_FUNC_GMII IO_PORTX_FUNC_GMII
+
+/*
+ * Port 6
+ */
+#define IO_PORT6_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT6_FUNC_DDR IO_PORTX_FUNC_DDR
+
+/*
+ * Port 7
+ */
+#define IO_PORT7_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT7_FUNC_DDR IO_PORTX_FUNC_DDR
+
+/*
+ * Port 8
+ */
+#define IO_PORT8_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT8_FUNC_PCIX IO_PORTX_FUNC_PCIX
+#define IO_PORT8_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+#define IO_PORT8_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
+
+/*
+ * Port 9
+ */
+#define IO_PORT9_FUNC_USB2_0 IO_PORTX_FUNC_USB2_0
+
+/*
+ * FIFO
+ */
+#define IO_PORTX_INT_FIFO_TX_RESET (1 << 31)
+#define IO_PORTX_INT_FIFO_RX_RESET (1 << 30)
+#define IO_PORTX_INT_FIFO_TX_UF (1 << 15)
+#define IO_PORTX_INT_FIFO_TX_WM (1 << 14)
+#define IO_PORTX_INT_FIFO_RX_OF (1 << 13)
+#define IO_PORTX_INT_FIFO_RX_WM (1 << 12)
+
+#define IO_PORTX_FUNC_FIFO_TX_WM(n) ((n) << 16)
+#define IO_PORTX_FUNC_FIFO_RX_WM(n) ((n) << 0)
+
+/*
+ * MII
+ */
+#define IO_PORTX_INT_MII_TX_ERR_SEND (1 << 18)
+#define IO_PORTX_INT_MII_TX_HALT (1 << 17)
+#define IO_PORTX_INT_MII_TX_START (1 << 16)
+#define IO_PORTX_INT_MII_THRESHOLD (1 << 8)
+#define IO_PORTX_INT_MII_RX_EOP (1 << 7)
+#define IO_PORTX_INT_MII_RX_SFD (1 << 6)
+#define IO_PORTX_INT_MII_RX_ERR (1 << 5)
+#define IO_PORTX_INT_MII_TX_EOP (1 << 4)
+#define IO_PORTX_INT_MII_COL (1 << 3)
+#define IO_PORTX_INT_MII_CRS (1 << 2)
+#define IO_PORTX_INT_MII_ODD_NIB_ERR (1 << 1)
+#define IO_PORTX_INT_MII_FALSE_CARRIER (1 << 0)
+
+/*
+ * SerDes
+ */
+#define IO_PORTX_INT_SERDES_TXBUF_VALID (1 << 16)
+#define IO_PORTX_INT_SERDES_RXERR (1 << 7)
+#define IO_PORTX_INT_SERDES_RXEOP (1 << 6)
+#define IO_PORTX_INT_SERDES_SYND (1 << 5)
+#define IO_PORTX_INT_SERDES_TXBE (1 << 4)
+#define IO_PORTX_INT_SERDES_TXEOP (1 << 3)
+#define IO_PORTX_INT_SERDES_SXLP (1 << 2)
+#define IO_PORTX_INT_SERDES_RXBF (1 << 1)
+#define IO_PORTX_INT_SERDES_RXCRS (1 << 0)
+
+#ifndef __ASSEMBLY__
+struct ubicom32_io_port {
+ volatile u32_t function;
+ volatile u32_t gpio_ctl;
+ volatile u32_t gpio_out;
+ volatile u32_t gpio_in;
+ volatile u32_t int_status;
+ volatile u32_t int_mask;
+ volatile u32_t int_set;
+ volatile u32_t int_clr;
+ volatile u32_t tx_fifo;
+ volatile u32_t tx_fifo_hi;
+ volatile u32_t rx_fifo;
+ volatile u32_t rx_fifo_hi;
+ volatile u32_t ctl0;
+ volatile u32_t ctl1;
+ volatile u32_t ctl2;
+ volatile u32_t status0;
+ volatile u32_t status1;
+ volatile u32_t status2;
+ volatile u32_t fifo_watermark;
+ volatile u32_t fifo_level;
+ volatile u32_t gpio_mask;
+};
+
+#define UBICOM32_IO_PORT(port) ((struct ubicom32_io_port *)((port)))
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ubicom32_set_interrupt()
+ */
+extern inline void ubicom32_set_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "move.4 "D(INT_SET(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "move.4 "D(INT_SET(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+}
+
+/*
+ * ubicom32_clear_interrupt()
+ */
+extern inline void ubicom32_clear_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "move.4 "D(INT_CLR(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "move.4 "D(INT_CLR(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+}
+
+/*
+ * ubicom32_enable_interrupt()
+ */
+extern inline void ubicom32_enable_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "or.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "or.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+}
+
+/*
+ * ubicom32_disable_interrupt()
+ */
+extern inline void ubicom32_disable_interrupt(u8_t interrupt)
+{
+ u32_t ibit = ~INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "and.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "and.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+}
+
+/*
+ * ubicom32_enable_global_interrupts()
+ */
+extern inline void ubicom32_enable_global_interrupts(void)
+{
+ asm volatile(
+ "bset GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
+ );
+}
+
+/*
+ * ubicom32_disable_global_interrupts()
+ */
+extern inline void ubicom32_disable_global_interrupts(void)
+{
+ asm volatile(
+ "bclr GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
+ );
+}
+
+/*
+ * ubicom32_get_reset_reason()
+ */
+extern inline u32_t ubicom32_get_reset_reason(void)
+{
+ return *(u32_t *)(GENERAL_CFG_BASE + GEN_RESET_REASON);
+}
+
+/*
+ * ubicom32_read_reg()
+ */
+extern inline u32_t ubicom32_read_reg(volatile void *reg)
+{
+ u32_t v;
+ asm volatile (
+ "move.4 %[dest], %[src] \n\t"
+ : [dest] "=r" (v)
+ : [src] "m" (*(u32_t *)reg)
+ );
+ return v;
+}
+
+/*
+ * ubicom32_write_reg()
+ */
+extern inline void ubicom32_write_reg(volatile void *reg, u32_t v)
+{
+ asm volatile (
+ "move.4 %[dest], %[src] \n\t"
+ :
+ : [src] "r" (v), [dest] "m" (*(u32_t *)reg)
+ );
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_IP5000_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ipcbuf.h linux-2.6.28.10/arch/ubicom32/include/asm/ipcbuf.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ipcbuf.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ipcbuf.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/ipcbuf.h
+ * Definition of ipc64_perm struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IPCBUF_H
+#define _ASM_UBICOM32_IPCBUF_H
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_UBICOM32_IPCBUF_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/irqflags.h linux-2.6.28.10/arch/ubicom32/include/asm/irqflags.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/irqflags.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/irqflags.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,94 @@
+/*
+ * arch/ubicom32/include/asm/irqflags.h
+ * Raw implementation of local IRQ functions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQFLAGS_H
+#define _ASM_UBICOM32_IRQFLAGS_H
+
+#include <linux/thread_info.h>
+#include <asm/ubicom32-common.h>
+#include <asm/smp.h>
+#include <asm/ldsr.h>
+
+#if defined(CONFIG_PREEMPT)
+#error Not supported by Ubicom32 irq handling, yet!
+#endif
+
+/*
+ * raw_local_irq_enable()
+ * Enable interrupts for this thread.
+ */
+static inline void raw_local_irq_enable(void)
+{
+ ldsr_local_irq_enable();
+}
+
+/*
+ * raw_local_irq_disable()
+ * Disable interrupts for this thread.
+ */
+static inline void raw_local_irq_disable(void)
+{
+ ldsr_local_irq_disable();
+}
+
+/*
+ * raw_local_save_flags()
+ * Get the current IRQ state.
+ */
+#define raw_local_save_flags(flags) \
+do { \
+ (flags) = ldsr_local_irq_is_disabled(); \
+} while (0)
+
+/*
+ * raw_local_irq_save()
+ * Save the current interrupt state and disable interrupts.
+ */
+#define raw_local_irq_save(flags) \
+do { \
+ (flags) = ldsr_local_irq_save(); \
+} while (0)
+
+/*
+ * raw_local_irq_restore()
+ * Restore the IRQ state back to flags.
+ */
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ ldsr_local_irq_restore(flags);
+}
+
+/*
+ * raw_irqs_disabled_flags()
+ * Return true if the flags indicate that IRQ(s) are disabled.
+ */
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags);
+}
+
+#endif /* _ASM_UBICOM32_IRQFLAGS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/irq.h linux-2.6.28.10/arch/ubicom32/include/asm/irq.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/irq.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/irq.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,45 @@
+/*
+ * arch/ubicom32/include/asm/irq.h
+ * IRQ definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQ_H
+#define _ASM_UBICOM32_IRQ_H
+
+#include <asm/irqflags.h>
+
+/*
+ * We setup the IRQS to cover the full range of interrupt registers in
+ * processor.
+ */
+#define NR_IRQS 64
+
+#define irq_canonicalize(irq) (irq)
+
+extern int irq_soft_alloc(unsigned int *soft);
+extern void ack_bad_irq(unsigned int irq);
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _ASM_UBICOM32_IRQ_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/irq_regs.h linux-2.6.28.10/arch/ubicom32/include/asm/irq_regs.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/irq_regs.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/irq_regs.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/irq_regs.h
+ * Generic irq_regs.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQ_REGS_H
+#define _ASM_UBICOM32_IRQ_REGS_H
+
+#include <asm-generic/irq_regs.h>
+
+#endif /* _ASM_UBICOM32_IRQ_REGS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/Kbuild linux-2.6.28.10/arch/ubicom32/include/asm/Kbuild
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/Kbuild 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/Kbuild 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/kdebug.h linux-2.6.28.10/arch/ubicom32/include/asm/kdebug.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/kdebug.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/kdebug.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/kdebug.h
+ * Generic kdebug.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_KDEBUG_H
+#define _ASM_UBICOM32_KDEBUG_H
+
+#include <asm-generic/kdebug.h>
+
+#endif /* _ASM_UBICOM32_KDEBUG_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/kmap_types.h linux-2.6.28.10/arch/ubicom32/include/asm/kmap_types.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/kmap_types.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/kmap_types.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,48 @@
+/*
+ * arch/ubicom32/include/asm/kmap_types.h
+ * Definition of km_type's for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_KMAP_TYPES_H
+#define _ASM_UBICOM32_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_UBICOM32_KMAP_TYPES_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ldsr.h linux-2.6.28.10/arch/ubicom32/include/asm/ldsr.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ldsr.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ldsr.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,186 @@
+/*
+ * arch/ubicom32/include/asm/ldsr.h
+ * Ubicom32 LDSR interface definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LDSR_H
+#define _ASM_UBICOM32_LDSR_H
+
+#include <asm/ubicom32-common.h>
+#include <asm/types.h>
+#include <asm/thread.h>
+
+extern unsigned int ldsr_soft_irq_mask;
+
+/*
+ * ldsr_local_irq_is_disabled()
+ * Test if interrupts are disabled for this thread?
+ */
+static inline int ldsr_local_irq_is_disabled(void)
+{
+ int ret;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+
+ asm volatile (
+ " and.4 %0, scratchpad1, %1 \n\t"
+ : "=r" (ret)
+ : "d" (mask)
+ : "cc"
+ );
+
+ /*
+ * We return a simple 1 == disabled, 0 == enabled
+ * losing which tid this is for, because Linux
+ * can restore interrupts on a different thread.
+ */
+ return ret >> self;
+}
+
+/*
+ * ldsr_local_irq_save()
+ * Get the current interrupt state and disable interrupts.
+ */
+static inline unsigned int ldsr_local_irq_save(void)
+{
+ int ret;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " and.4 %0, scratchpad1, %1 \n\t"
+ " or.4 scratchpad1, scratchpad1, %1 \n\t"
+ : "=&r" (ret)
+ : "d" (mask)
+ : "cc", "memory"
+ );
+
+ /*
+ * We return a simple 1 == disabled, 0 == enabled
+ * losing which tid this is for, because Linux
+ * can restore interrupts on a different thread.
+ */
+ return ret >> self;
+}
+
+/*
+ * ldsr_local_irq_restore()
+ * Restore this cpu's interrupt enable/disable state.
+ *
+ * Note: flags is either 0 or 1.
+ */
+static inline void ldsr_local_irq_restore(unsigned int flags)
+{
+ unsigned int temp;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+ flags = (flags << self);
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ *
+ * Atomic change to our bit in scratchpad1 without
+ * causing any temporary glitch in the value and
+ * without effecting other values. Also this uses
+ * no branches so no penalties.
+ */
+ asm volatile (
+ " xor.4 %0, scratchpad1, %1 \n\t"
+ " and.4 %0, %2, %0 \n\t"
+ " xor.4 scratchpad1, scratchpad1, %0 \n\t"
+ " move.4 int_set0, %3 \n\t"
+ : "=&d"(temp)
+ : "d"(flags), "r"(mask), "r"(ldsr_soft_irq_mask)
+ : "cc", "memory"
+ );
+}
+
+/*
+ * ldsr_local_irq_disable_interrupt()
+ * Disable ints for this thread.
+ */
+static inline void ldsr_local_irq_disable(void)
+{
+ unsigned int mask = (1 << thread_get_self());
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " or.4 scratchpad1, scratchpad1, %0 \n\t"
+ :
+ : "d" (mask)
+ : "cc", "memory"
+ );
+}
+
+/*
+ * ldsr_local_irq_enable_interrupt
+ * Enable ints for this thread.
+ */
+static inline void ldsr_local_irq_enable(void)
+{
+ unsigned int mask = (1 << thread_get_self());
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " and.4 scratchpad1, scratchpad1, %0 \n\t"
+ " move.4 int_set0, %1 \n\t"
+ :
+ : "d" (~mask), "r" (ldsr_soft_irq_mask)
+ : "cc", "memory"
+ );
+}
+
+extern void ldsr_init(void);
+extern void ldsr_set_trap_irq(unsigned int irq);
+extern void ldsr_mask_vector(unsigned int vector);
+extern void ldsr_unmask_vector(unsigned int vector);
+extern void ldsr_enable_vector(unsigned int vector);
+extern void ldsr_disable_vector(unsigned int vector);
+extern thread_t ldsr_get_threadid(void);
+
+#endif /* _ASM_UBICOM32_LDSR_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/linkage.h linux-2.6.28.10/arch/ubicom32/include/asm/linkage.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/linkage.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/linkage.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/linkage.h
+ * Definition of Ubicom32 architecture specific linkage types.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LINKAGE_H
+#define _ASM_UBICOM32_LINKAGE_H
+
+#define __ocm_text __section(.ocm_text)
+#define __ocm_data __section(.ocm_data)
+
+#endif /* _ASM_UBICOM32_LINKAGE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/local.h linux-2.6.28.10/arch/ubicom32/include/asm/local.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/local.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/local.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/local.h
+ * Generic local.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LOCAL_H
+#define _ASM_UBICOM32_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_UBICOM32_LOCAL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/machdep.h linux-2.6.28.10/arch/ubicom32/include/asm/machdep.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/machdep.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/machdep.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,43 @@
+/*
+ * arch/ubicom32/include/asm/machdep.h
+ * Machine dependent utility routines.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MACHDEP_H
+#define _ASM_UBICOM32_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern unsigned long hw_timer_offset(void);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)(void);
+extern void (*mach_halt)(void);
+extern void (*mach_power_off)(void);
+
+extern void config_BSP(char *command, int len);
+
+#endif /* _ASM_UBICOM32_MACHDEP_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/mc146818rtc.h linux-2.6.28.10/arch/ubicom32/include/asm/mc146818rtc.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/mc146818rtc.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/mc146818rtc.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/mc146818rtc.h
+ * Generic mc146818rtc.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_UBICOM32_MC146818RTC_H
+#define _ASM_UBICOM32_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _ASM_UBICOM32_MC146818RTC_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/mman.h linux-2.6.28.10/arch/ubicom32/include/asm/mman.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/mman.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/mman.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/mman.h
+ * Memory mapping definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MMAN_H
+#define _ASM_UBICOM32_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_UBICOM32_MMAN_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/mmu_context.h linux-2.6.28.10/arch/ubicom32/include/asm/mmu_context.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/mmu_context.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/mmu_context.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,60 @@
+/*
+ * arch/ubicom32/include/asm/mmu_context.h
+ * MMU context definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_MMU_CONTEXT_H
+#define _ASM_UBICOM32_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ // mm->context = virt_to_phys(mm->pgd);
+ return(0);
+}
+
+#define destroy_context(mm) do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+extern inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+}
+
+#endif /* _ASM_UBICOM32_MMU_CONTEXT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/mmu.h linux-2.6.28.10/arch/ubicom32/include/asm/mmu.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/mmu.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/mmu.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,41 @@
+/*
+ * arch/ubicom32/include/asm/mmu.h
+ * Definition of mm_context_t struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2002, David McCullough <davidm@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MMU_H
+#define _ASM_UBICOM32_MMU_H
+
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+#endif /* _ASM_UBICOM32_MMU_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/module.h linux-2.6.28.10/arch/ubicom32/include/asm/module.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/module.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/module.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/module.h
+ * Ubicom32 architecture specific module definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MODULE_H
+#define _ASM_UBICOM32_MODULE_H
+
+struct mod_arch_specific {
+ void *ocm_inst;
+ int ocm_inst_size;
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#define ARCH_PROC_MODULES_EXTRA(m,mod) \
+ seq_printf(m, " OCM(%d bytes @ 0x%p)", \
+ (mod)->arch.ocm_inst_size, (mod)->arch.ocm_inst)
+
+#endif /* _ASM_UBICOM32_MODULE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/msgbuf.h linux-2.6.28.10/arch/ubicom32/include/asm/msgbuf.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/msgbuf.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/msgbuf.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,58 @@
+/*
+ * arch/ubicom32/include/asm/msgbuf.h
+ * Definition of msqid64_ds struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MSGBUF_H
+#define _ASM_UBICOM32_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for ubicom32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_UBICOM32_MSGBUF_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/mutex.h linux-2.6.28.10/arch/ubicom32/include/asm/mutex.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/mutex.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/mutex.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,41 @@
+/*
+ * arch/ubicom32/include/asm/mutex.h
+ * Generic mutex.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#ifndef _ASM_UBICOM32_MUTEX_H
+#define _ASM_UBICOM32_MUTEX_H
+
+#include <asm-generic/mutex-dec.h>
+
+#endif /* _ASM_UBICOM32_MUTEX_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/namei.h linux-2.6.28.10/arch/ubicom32/include/asm/namei.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/namei.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/namei.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,38 @@
+/*
+ * arch/ubicom32/include/asm/namei.h
+ * Definition of __emul_prefix() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_NAMEI_H
+#define _ASM_UBICOM32_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_UBICOM32_NAMEI_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm-alloc.h linux-2.6.28.10/arch/ubicom32/include/asm/ocm-alloc.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm-alloc.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ocm-alloc.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/ocm-alloc.h
+ * Ubicom32 architecture specific ocm definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_OCM_ALLOC_H
+#define _ASM_UBICOM32_OCM_ALLOC_H
+
+
+extern void *ocm_inst_alloc(size_t size, pid_t pid);
+extern int ocm_free(const void *ptr);
+extern int ocm_inst_free(const void *ptr);
+
+#endif /* _ASM_UBICOM32_OCM_ALLOC_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm_size.h linux-2.6.28.10/arch/ubicom32/include/asm/ocm_size.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm_size.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ocm_size.h 2009-08-06 11:15:34.000000000 +0300
@@ -0,0 +1,2 @@
+#define APP_OCM_CODE_SIZE (0x3ffc2e00-0x3ffc0000)
+#define APP_OCM_DATA_SIZE (0x3ffd3500-0x3ffc8000)
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm_text.lds.inc linux-2.6.28.10/arch/ubicom32/include/asm/ocm_text.lds.inc
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ocm_text.lds.inc 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ocm_text.lds.inc 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,175 @@
+/*
+ * arch/ubicom32/include/asm/ocm_text.lds.inc
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+*(.text.do_csum)
+*(.text.tcp_packet)
+*(.text.ipt_do_table)
+*(.text.nf_conntrack_in)
+*(.text.ip_forward)
+*(.text.dev_queue_xmit)
+*(.text.netif_receive_skb)
+*(.text.ip_route_input)
+*(.text.ip_finish_output)
+*(.text.nf_iterate)
+*(.text.__hash_conntrack)
+*(.text.memset)
+*(.text.memcpy)
+*(.text.ip_rcv)
+*(.text.__nf_conntrack_find)
+*(.text.dev_hard_start_xmit)
+*(.text.vlan_dev_hard_start_xmit)
+*(.text.vlan_dev_hard_header)
+*(.text.__nf_ct_refresh_acct)
+*(.text.tcp_error)
+*(.text.pfifo_fast_enqueue)
+*(.text.ipv4_confirm)
+*(.text.ip_output)
+*(.text.neigh_connected_output)
+*(.text.nf_hook_slow)
+*(.text.nf_nat_packet)
+*(.text.local_bh_enable)
+*(.text.pfifo_fast_dequeue)
+*(.text.ubi32_eth_receive)
+*(.text.nf_nat_fn)
+*(.text.skb_checksum)
+*(.text.memmove)
+*(.text.ubi32_eth_tx_done)
+*(.text.eth_header)
+*(.text.skb_release_data)
+*(.text.nf_conntrack_find_get)
+*(.text.process_backlog)
+*(.text.vlan_skb_recv)
+*(.text.ip_rcv_finish)
+*(.text.__qdisc_run)
+*(.text.skb_push)
+*(.text.eth_type_trans)
+*(.text.__alloc_skb)
+*(.text.netif_rx)
+*(.text.nf_ip_checksum)
+*(.text.__skb_checksum_complete_head)
+*(.text.ipv4_conntrack_defrag)
+*(.text.tcp_pkt_to_tuple)
+*(.text.kfree)
+*(.text.tcp_manip_pkt)
+*(.text.skb_put)
+*(.text.nf_ct_get_tuple)
+*(.text.__kmalloc)
+*(.text.ubi32_eth_start_xmit)
+*(.text.free_block)
+*(.text.ipt_hook)
+*(.text.kmem_cache_free)
+*(.text.skb_pull_rcsum)
+*(.text.cache_alloc_refill)
+*(.text.skb_release_head_state)
+*(.text.manip_pkt)
+*(.text.ip_sabotage_in)
+*(.text.ip_forward_finish)
+*(.text.kmem_cache_alloc)
+*(.text.local_bh_disable)
+*(.text.ipv4_pkt_to_tuple)
+*(.text.inet_proto_csum_replace4)
+*(.text.__nf_ct_l4proto_find)
+*(.text.csum_partial)
+*(.text.neigh_resolve_output)
+*(.text.__kfree_skb)
+*(.text.kfree_skb)
+*(.text.__find_vlan_dev)
+*(.text.ldsr_ctxsw_thread)
+*(.text.__do_IRQ)
+*(.text.skb_pull)
+*(.text.ipv4_invert_tuple)
+*(.text.nf_ct_invert_tuplepr)
+*(.text.skb_make_writable)
+*(.text.ipv4_get_l4proto)
+*(.text.handle_IRQ_event)
+*(.text.net_rx_action)
+*(.text.__do_softirq)
+*(.text.nf_nat_in)
+*(.text.note_interrupt)
+*(.text.ipv4_conntrack_in)
+*(.text.dst_release)
+*(.text.tasklet_action)
+*(.text.nf_nat_out)
+*(.text.nf_ct_invert_tuple)
+*(.text.do_IRQ)
+*(.text.__tasklet_schedule)
+*(.text.__skb_checksum_complete)
+*(.text.ubi32_eth_interrupt)
+*(.text.dev_kfree_skb_any)
+*(.text.ret_from_interrupt_to_kernel)
+*(.text.preemptive_context_save)
+*(.text.irq_ack_vector)
+*(.text.update_wall_time)
+*(.text.ldsr_thread)
+*(.text.irq_exit)
+*(.text.ubi32_eth_do_tasklet)
+*(.text.__napi_schedule)
+*(.text.idle_cpu)
+*(.text.run_timer_softirq)
+*(.text.ldsr_mask_vector)
+*(.text.irq_enter)
+*(.text.ldsr_get_lsb)
+*(.text.ldsr_unmask_vector)
+*(.text.ip_fast_csum)
+*(.text.hrtimer_run_queues)
+*(.text.tcp_invert_tuple)
+*(.text.T___705)
+*(.text.run_posix_cpu_timers)
+*(.text.free_hot_cold_page)
+*(.text.lock_timer_base)
+*(.text.calc_delta_mine)
+*(.text.slab_destroy)
+*(.text.rcu_pending)
+*(.text.scheduler_tick)
+*(.text.hrtimer_run_pending)
+*(.text.do_softirq)
+*(.text.del_timer)
+*(.text.irq_end_vector)
+*(.text.pci_read_u32)
+*(.text.udivmodsi4)
+*(.text.memcmp)
+*(.text.memset)
+*(.text.__slab_alloc)
+*(.text.br_handle_frame)
+*(.text.br_fdb_update)
+*(.text.__br_fdb_get)
+*(.text.br_forward)
+*(.text.br_handle_frame_finish)
+*(.text.pci_write_u32)
+*(.text.kmem_freepages)
+*(.text.br_dev_queue_push_xmit)
+*(.text.ioread32)
+*(.text.next_zones_zonelist)
+*(.text.ubi32_pci_read_u32)
+*(.text.zone_watermark_ok)
+*(.text.__rmqueue_smallest)
+*(.text.ubi32_eth_napi_poll)
+*(.text.ubi32_pci_write_u32)
+*(.text.ubi32_pci_read_u32)
+*(.text._local_bh_enable)
+*(.text._local_bh_disable)
+*(.text.get_slab)
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/page.h linux-2.6.28.10/arch/ubicom32/include/asm/page.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/page.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/page.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,106 @@
+/*
+ * arch/ubicom32/include/asm/page.h
+ * Memory page related operations and definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PAGE_H
+#define _ASM_UBICOM32_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+ ((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+#include <asm-generic/page.h>
+#endif
+
+#endif /* _ASM_UBICOM32_PAGE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/page_offset.h linux-2.6.28.10/arch/ubicom32/include/asm/page_offset.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/page_offset.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/page_offset.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/page_offset.h
+ * Definition of PAGE_OFFSET_RAW for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_PAGE_OFFSET_H
+#define _ASM_UBICOM32_PAGE_OFFSET_H
+
+/* This handles the memory map.. */
+#define PAGE_OFFSET_RAW 0x3ffc0000
+
+#endif /* _ASM_UBICOM32_PAGE_OFFSET_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/param.h linux-2.6.28.10/arch/ubicom32/include/asm/param.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/param.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/param.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/param.h
+ * Definition of miscellaneous constants, including HZ.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PARAM_H
+#define _ASM_UBICOM32_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ HZ
+#define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_UBICOM32_PARAM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/pci.h linux-2.6.28.10/arch/ubicom32/include/asm/pci.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/pci.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/pci.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,210 @@
+/*
+ * arch/ubicom32/include/asm/pci.h
+ * Definitions of PCI operations for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PCI_H
+#define _ASM_UBICOM32_PCI_H
+
+#include <asm/io.h>
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+
+
+/*
+ * Perform a master read/write to the PCI bus.
+ * These functions return a PCI_RESP_xxx code.
+ */
+extern u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data);
+extern u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data);
+extern u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data);
+extern u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data);
+extern u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data);
+extern u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data);
+
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x10000000
+
+#define pcibios_assign_all_busses() 0
+#define pcibios_scan_all_fns(a, b) 0
+extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+ struct list_head buses;
+ int nr_controllers;
+ int (*setup)(int nr, struct pci_sys_data *);
+ struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+ void (*preinit)(void);
+ void (*postinit)(void);
+ u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
+ int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+ struct list_head node;
+ int busnr; /* primary bus number */
+ u64 mem_offset; /* bus->cpu memory mapping offset */
+ unsigned long io_offset; /* bus->cpu IO mapping offset */
+ struct pci_bus *bus; /* PCI bus */
+ struct resource *resource[3]; /* Primary PCI bus resources */
+ /* Bridge swizzling */
+ u8 (*swizzle)(struct pci_dev *, u8 *);
+ /* IRQ mapping */
+ int (*map_irq)(struct pci_dev *, u8, u8);
+ struct hw_pci *hw;
+};
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+#define HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE 1
+#define HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY 1
+
+#ifdef CONFIG_PCI
+static inline void * pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ void *vaddr = kmalloc(size, GFP_KERNEL);
+ if(vaddr != NULL) {
+ *dma_handle = virt_to_phys(vaddr);
+ }
+ return vaddr;
+}
+
+static inline int pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
+{
+ return 1;
+}
+
+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ kfree(cpu_addr);
+ return;
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
+ size_t size, int direction)
+{
+ return virt_to_phys(ptr);
+}
+
+static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+ size_t size, int direction)
+{
+ return;
+}
+
+static inline dma_addr_t
+pci_map_page(struct pci_dev *hwdev, struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ return pci_map_single(hwdev, page_address(page) + offset, size, (int)direction);
+}
+
+static inline void
+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
+ size_t size, int direction)
+{
+ pci_unmap_single(hwdev, dma_address, size, direction);
+}
+
+static inline int
+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ return nents;
+}
+
+static inline void
+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+}
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
+{
+ return dma_addr == 0;
+}
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#endif
+
+#endif /* _ASM_UBICOM32_PCI_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/percpu.h linux-2.6.28.10/arch/ubicom32/include/asm/percpu.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/percpu.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/percpu.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/percpu.h
+ * Generic percpu.h for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PERCPU_H
+#define _ASM_UBICOM32_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_UBICOM32_PERCPU_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/pgalloc.h linux-2.6.28.10/arch/ubicom32/include/asm/pgalloc.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/pgalloc.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/pgalloc.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/pgalloc.h
+ * Page table allocation definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PGALLOC_H
+#define _ASM_UBICOM32_PGALLOC_H
+
+#include <linux/mm.h>
+#include <asm/setup.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_UBICOM32_PGALLOC_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/pgtable.h linux-2.6.28.10/arch/ubicom32/include/asm/pgtable.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/pgtable.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/pgtable.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/pgtable.h
+ * Ubicom32 pseudo page table definitions and operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * and various works, Alpha, ix86, M68K, Sparc, ...et al
+ */
+#ifndef _ASM_UBICOM32_PGTABLE_H
+#define _ASM_UBICOM32_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+//vic - this bit copied from m68knommu version
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <linux/sched.h>
+
+typedef pte_t *pte_addr_t;
+
+#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *)0)
+
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+//vic - this bit copied from m68knommu version
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+/*
+ * pgprot_noncached() is only for infiniband pci support, and a real
+ * implementation for RAM would be more complicated.
+ */
+#define pgprot_noncached(prot) (prot)
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+extern inline void flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+extern inline void flush_cache_range(struct mm_struct *mm,
+ unsigned long start,
+ unsigned long end)
+{
+}
+
+/* Push the page at kernel virtual address and clear the icache */
+extern inline void flush_page_to_ram (unsigned long address)
+{
+}
+
+/* Push n pages at kernel virtual address and clear the icache */
+extern inline void flush_pages_to_ram (unsigned long address, int n)
+{
+}
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#define arch_enter_lazy_mmu_mode() do {} while (0)
+#define arch_leave_lazy_mmu_mode() do {} while (0)
+#define arch_flush_lazy_mmu_mode() do {} while (0)
+#define arch_enter_lazy_cpu_mode() do {} while (0)
+#define arch_leave_lazy_cpu_mode() do {} while (0)
+#define arch_flush_lazy_cpu_mode() do {} while (0)
+
+#endif /* _ASM_UBICOM32_PGTABLE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/poll.h linux-2.6.28.10/arch/ubicom32/include/asm/poll.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/poll.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/poll.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/poll.h
+ * Ubicom32 specific poll() related flags definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_POLL_H
+#define _ASM_UBICOM32_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 0x0100
+
+#include <asm-generic/poll.h>
+
+#endif /* _ASM_UBICOM32_POLL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/posix_types.h linux-2.6.28.10/arch/ubicom32/include/asm/posix_types.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/posix_types.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/posix_types.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,93 @@
+/*
+ * arch/ubicom32/include/asm/posix_types.h
+ * Ubicom32 architecture posix types.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef __ARCH_UBICOM32_POSIX_TYPES_H
+#define __ARCH_UBICOM32_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/processor.h linux-2.6.28.10/arch/ubicom32/include/asm/processor.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/processor.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/processor.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,163 @@
+/*
+ * arch/ubicom32/include/asm/processor.h
+ * Thread related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_PROCESSOR_H
+#define _ASM_UBICOM32_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/thread_info.h>
+
+#if defined(CONFIG_UBICOM32_V3)
+ #define CPU "IP5K"
+#endif
+#if defined(CONFIG_UBICOM32_V4)
+ #define CPU "IP7K"
+#endif
+#ifndef CPU
+ #define CPU "UNKNOWN"
+#endif
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ */
+extern unsigned long memory_end;
+#define TASK_SIZE (memory_end)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+/*
+ * This is the structure where we are going to save callee-saved registers.
+ * A5 is the return address, A7 is the stack pointer, A6 is the frame
+ * pointer. This is the frame that is created because of switch_to. This
+ * is not the frame due to interrupt preemption or because of syscall entry.
+ */
+
+struct thread_struct {
+ unsigned long d10; /* D10 */
+ unsigned long d11; /* D11 */
+ unsigned long d12; /* D12 */
+ unsigned long d13; /* D13 */
+ unsigned long a1; /* A1 */
+ unsigned long a2; /* A2 */
+ unsigned long a5; /* A5 return address. */
+ unsigned long a6; /* A6 */
+ unsigned long sp; /* A7 kernel stack pointer. */
+};
+
+#define INIT_THREAD { \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ sizeof(init_stack) + (unsigned long) init_stack - 8, \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp) \
+ do { \
+ regs->pc = new_pc & ~3; \
+ regs->an[5] = new_pc & ~3; \
+ regs->an[7] = new_sp; \
+ regs->nesting_level = -1; \
+ regs->frame_type = UBICOM32_FRAME_TYPE_NEW_THREAD; \
+ regs->thread_type = NORMAL_THREAD; \
+ } while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) (tsk->thread.a5)
+#define KSTK_ESP(tsk) (tsk->thread.sp)
+
+#define cpu_relax() barrier()
+
+extern void processor_init(void);
+extern unsigned int processor_timers(void);
+extern unsigned int processor_threads(void);
+extern unsigned int processor_frequency(void);
+extern int processor_interrupts(unsigned int *int0, unsigned int *int1);
+extern int processor_ocm(void **socm, void **eocm);
+extern int processor_dram(void **sdram, void **edram);
+
+#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long))
+#define KSTK_TOP(info) \
+({ \
+ unsigned long *__ptr = (unsigned long *)(info); \
+ (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \
+})
+
+#define task_pt_regs(task) \
+({ \
+ struct pt_regs *__regs__; \
+ __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
+ __regs__ - 1; \
+})
+
+#endif /* _ASM_UBICOM32_PROCESSOR_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ptrace.h linux-2.6.28.10/arch/ubicom32/include/asm/ptrace.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ptrace.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ptrace.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,177 @@
+/*
+ * arch/ubicom32/include/asm/ptrace.h
+ * Ubicom32 architecture ptrace support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PTRACE_H
+#define _ASM_UBICOM32_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use hard coded constants because this is shared with user
+ * space and the values are NOT allowed to change. Only fields
+ * that are intended to be exposed get values.
+ */
+#define PT_D0 0
+#define PT_D1 4
+#define PT_D2 8
+#define PT_D3 12
+#define PT_D4 16
+#define PT_D5 20
+#define PT_D6 24
+#define PT_D7 28
+#define PT_D8 32
+#define PT_D9 36
+#define PT_D10 40
+#define PT_D11 44
+#define PT_D12 48
+#define PT_D13 52
+#define PT_D14 56
+#define PT_D15 60
+#define PT_A0 64
+#define PT_A1 68
+#define PT_A2 72
+#define PT_A3 76
+#define PT_A4 80
+#define PT_A5 84
+#define PT_A6 88
+#define PT_A7 92
+#define PT_SP 92
+#define PT_ACC0HI 96
+#define PT_ACC0LO 100
+#define PT_MAC_RC16 104
+#define PT_ACC1HI 108
+#define PT_ACC1LO 112
+#define PT_SOURCE3 116
+#define PT_INST_CNT 120
+#define PT_CSR 124
+#define PT_DUMMY_UNUSED 128
+#define PT_INT_MASK0 132
+#define PT_INT_MASK1 136
+#define PT_TRAP_CAUSE 140
+#define PT_PC 144
+#define PT_ORIGINAL_D0 148
+#define PT_FRAME_TYPE 152
+
+/*
+ * The following 'registers' are not registers at all but are used
+ * locate the relocated sections.
+ */
+#define PT_TEXT_ADDR 200
+#define PT_TEXT_END_ADDR 204
+#define PT_DATA_ADDR 208
+#define PT_EXEC_FDPIC_LOADMAP 212
+#define PT_INTERP_FDPIC_LOADMAP 216
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.
+ */
+enum thread_type {
+ NORMAL_THREAD,
+ KERNEL_THREAD,
+};
+
+#define UBICOM32_FRAME_TYPE_SYSCALL -1 /* System call frame */
+#define UBICOM32_FRAME_TYPE_INVALID 0 /* Invalid frame, no longer in use */
+#define UBICOM32_FRAME_TYPE_INTERRUPT 1 /* Interrupt frame */
+#define UBICOM32_FRAME_TYPE_TRAP 2 /* Trap frame */
+#define UBICOM32_FRAME_TYPE_SIGTRAMP 3 /* Signal trampoline frame. */
+#define UBICOM32_FRAME_TYPE_NEW_THREAD 4 /* New Thread. */
+
+struct pt_regs {
+ /*
+ * Data Registers
+ */
+ unsigned long dn[16];
+
+ /*
+ * Address Registers
+ */
+ unsigned long an[8];
+
+ /*
+ * Per thread misc registers.
+ */
+ unsigned long acc0[2];
+ unsigned long mac_rc16;
+ unsigned long acc1[2];
+ unsigned long source3;
+ unsigned long inst_cnt;
+ unsigned long csr;
+ unsigned long dummy_unused;
+ unsigned long int_mask0;
+ unsigned long int_mask1;
+ unsigned long trap_cause;
+ unsigned long pc;
+ unsigned long original_dn_0;
+
+ /*
+ * Frame type. Syscall frames are -1. For other types look above.
+ */
+ unsigned long frame_type;
+
+ /*
+ * These fields are not exposed to ptrace.
+ */
+ unsigned long previous_pc;
+ long nesting_level; /* When the kernel in in user space this
+ * will be -1. */
+ unsigned long thread_type; /* This indicates if this is a kernel
+ * thread. */
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long dummy;
+};
+
+#ifdef __KERNEL__
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+extern int __user_mode(unsigned long sp);
+
+#define user_mode(regs) (__user_mode((regs->an[7])))
+#define user_stack(regs) ((regs)->an[7])
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_PTRACE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/range-protect-asm.h linux-2.6.28.10/arch/ubicom32/include/asm/range-protect-asm.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/range-protect-asm.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/range-protect-asm.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,91 @@
+/*
+ * arch/ubicom32/include/asm/range-protect-asm.h
+ * Assembly macros for enabling memory protection.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_RANGE_PROTECT_ASM_H
+#define _ASM_UBICOM32_RANGE_PROTECT_ASM_H
+
+#if defined(__ASSEMBLY__)
+
+#include <asm/thread-asm.h>
+
+/*
+ * You should only use the enable/disable ranges when you have the atomic lock,
+ * if you do not there will be problems.
+ */
+
+/*
+ * enable_kernel_ranges
+ * Enable the kernel ranges (disabling protection) for thread,
+ * where thread == (1 << thread number)
+ */
+.macro enable_kernel_ranges thread
+#ifdef CONFIG_PROTECT_KERNEL
+ or.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Enable Range Register */
+ or.4 D_RANGE0_EN, D_RANGE0_EN, \thread
+ or.4 D_RANGE1_EN, D_RANGE1_EN, \thread
+#endif
+.endm
+
+/*
+ * enable_kernel_ranges_for_current
+ * Enable the kernel ranges (disabling protection) for this thread
+ */
+.macro enable_kernel_ranges_for_current scratch_reg
+#ifdef CONFIG_PROTECT_KERNEL
+ thread_get_self_mask \scratch_reg
+ enable_kernel_ranges \scratch_reg
+#endif
+.endm
+
+/*
+ * disable_kernel_ranges
+ * Disables the kernel ranges (enabling protection) for thread
+ * where thread == (1 << thread number)
+ */
+.macro disable_kernel_ranges thread
+#ifdef CONFIG_PROTECT_KERNEL
+ not.4 \thread, \thread
+ and.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Disable Range Register */
+ and.4 D_RANGE0_EN, D_RANGE0_EN, \thread
+ and.4 D_RANGE1_EN, D_RANGE1_EN, \thread
+#endif
+.endm
+
+/*
+ * disable_kernel_ranges_for_current
+ * Disable kernel ranges (enabling protection) for this thread
+ */
+.macro disable_kernel_ranges_for_current scratch_reg
+#ifdef CONFIG_PROTECT_KERNEL
+ thread_get_self_mask \scratch_reg
+ disable_kernel_ranges \scratch_reg
+#endif
+.endm
+#endif
+
+#endif /* _ASM_UBICOM32_RANGE_PROTECT_ASM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/range-protect.h linux-2.6.28.10/arch/ubicom32/include/asm/range-protect.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/range-protect.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/range-protect.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,62 @@
+/*
+ * arch/ubicom32/include/asm/range-protect.h
+ * Assembly macros declared in C for enabling memory protection.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_RANGE_PROTECT_H
+#define _ASM_UBICOM32_RANGE_PROTECT_H
+
+#if !defined(__ASSEMBLY__)
+#include <asm/thread.h>
+/*
+ * The following macros should be the identical to the ones in
+ * range-protect-asm.h
+ *
+ * You should only use the enable/disable ranges when you have the atomic lock,
+ * if you do not there will be problems.
+ */
+
+/*
+ * enable_kernel_ranges
+ * Enable the kernel ranges (disabling protection) for thread,
+ * where thread == (1 << thread number)
+ */
+asm (
+ ".macro enable_kernel_ranges thread \n\t"
+#ifdef CONFIG_PROTECT_KERNEL
+ " or.4 I_RANGE0_EN, I_RANGE0_EN, \\thread \n\t" /* Enable Range Register */
+ " or.4 D_RANGE0_EN, D_RANGE0_EN, \\thread \n\t"
+ " or.4 D_RANGE1_EN, D_RANGE1_EN, \\thread \n\t"
+#endif
+ ".endm \n\t"
+);
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/range-protect-asm.h>
+
+#endif
+#endif /* _ASM_UBICOM32_RANGE_PROTECT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/resource.h linux-2.6.28.10/arch/ubicom32/include/asm/resource.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/resource.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/resource.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/resource.h
+ * Generic definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_RESOURCE_H
+#define _ASM_UBICOM32_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_UBICOM32_RESOURCE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ring_tio.h linux-2.6.28.10/arch/ubicom32/include/asm/ring_tio.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ring_tio.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ring_tio.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,42 @@
+/*
+ * arch/ubicom32/include/asm/ring_tio.h
+ * Ubicom32 architecture Ring TIO definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_RING_TIO_H
+#define _ASM_UBICOM32_RING_TIO_H
+
+#include <asm/devtree.h>
+
+#define RING_TIO_NODE_VERSION 2
+
+/*
+ * Devtree node for ring
+ */
+struct ring_tio_node {
+ struct devtree_node dn;
+
+ u32_t version;
+ void *regs;
+};
+
+extern void ring_tio_init(const char *node_name);
+
+#endif /* _ASM_UBICOM32_RING_TIO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/scatterlist.h linux-2.6.28.10/arch/ubicom32/include/asm/scatterlist.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/scatterlist.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/scatterlist.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/scatterlist.h
+ * Definitions of struct scatterlist for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SCATTERLIST_H
+#define _ASM_UBICOM32_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* _ASM_UBICOM32_SCATTERLIST_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/sections.h linux-2.6.28.10/arch/ubicom32/include/asm/sections.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/sections.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/sections.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/sections.h
+ * Generic sections.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SECTIONS_H
+#define _ASM_UBICOM32_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_UBICOM32_SECTIONS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/segment.h linux-2.6.28.10/arch/ubicom32/include/asm/segment.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/segment.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/segment.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,78 @@
+/*
+ * arch/ubicom32/include/asm/segment.h
+ * Memory segment definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEGMENT_H
+#define _ASM_UBICOM32_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_SEGMENT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/semaphore.h linux-2.6.28.10/arch/ubicom32/include/asm/semaphore.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/semaphore.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/semaphore.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,140 @@
+/*
+ * arch/ubicom32/include/asm/semaphore.h
+ * Interrupt-safe semaphores for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) Copyright 1996 Linus Torvalds
+ * m68k version by Andreas Schwab
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMAPHORE_H
+#define _ASM_UBICOM32_SEMAPHORE_H
+
+#define RW_LOCK_BIAS 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct semaphore {
+ atomic_t count;
+ atomic_t waking;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .waking = ATOMIC_INIT(0), \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int __down_failed_interruptible(void /* params in registers */);
+asmlinkage int __down_failed_trylock(void /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int __down_interruptible(struct semaphore * sem);
+asmlinkage int __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits.
+ */
+static inline void down(struct semaphore * sem)
+{
+ might_sleep();
+
+ if (atomic_dec_return(&sem->count) < 0)
+ __down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+ int ret = 0;
+
+
+ might_sleep();
+
+ if(atomic_dec_return(&sem->count) < 0)
+ ret = __down_interruptible(sem);
+ return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+ int ret = 0;
+
+ if (atomic_dec_return (&sem->count) < 0)
+ ret = __down_trylock(sem);
+ return ret;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+ if (atomic_inc_return(&sem->count) <= 0)
+ __up(sem);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_SEMAPHORE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/semaphore-helper.h linux-2.6.28.10/arch/ubicom32/include/asm/semaphore-helper.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/semaphore-helper.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/semaphore-helper.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,109 @@
+/*
+ * arch/ubicom32/include/asm/semaphore-helper.h
+ * Semaphore related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMAPHORE_HELPER_H
+#define _ASM_UBICOM32_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+ atomic_inc(&sem->waking);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 0;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ * 1 got the lock
+ * 0 go to sleep
+ * -EINTR interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+ struct task_struct *tsk)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 0;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ } else if (signal_pending(tsk)) {
+ atomic_inc(&sem->count);
+ ret = -EINTR;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ * 1 failed to lock
+ * 0 got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 1;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 0;
+ } else
+ atomic_inc(&sem->count);
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+#endif /* _ASM_UBICOM32_SEMAPHORE_HELPER_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/sembuf.h linux-2.6.28.10/arch/ubicom32/include/asm/sembuf.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/sembuf.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/sembuf.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,52 @@
+/*
+ * arch/ubicom32/include/asm/sembuf.h
+ * The semid64_ds structure for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMBUF_H
+#define _ASM_UBICOM32_SEMBUF_H
+
+/*
+ * The semid64_ds structure for ubicom32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_UBICOM32_SEMBUF_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/setup.h linux-2.6.28.10/arch/ubicom32/include/asm/setup.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/setup.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/setup.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/setup.h
+ * Kernel command line length definition.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_SETUP_H
+#define _ASM_UBICOM32_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#endif /* _ASM_UBICOM32_SETUP_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/shmbuf.h linux-2.6.28.10/arch/ubicom32/include/asm/shmbuf.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/shmbuf.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/shmbuf.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,69 @@
+/*
+ * arch/ubicom32/include/asm/shmbuf.h
+ * The shmid64_ds structure for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SHMBUF_H
+#define _ASM_UBICOM32_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_UBICOM32_SHMBUF_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/shmparam.h linux-2.6.28.10/arch/ubicom32/include/asm/shmparam.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/shmparam.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/shmparam.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/shmparam.h
+ * Shared memory definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * Alpha, ix86, M68K, Sparc, ...et al
+ */
+#ifndef _ASM_UBICOM32_SHMPARAM_H
+#define _ASM_UBICOM32_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_UBICOM32_SHMPARAM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/sigcontext.h linux-2.6.28.10/arch/ubicom32/include/asm/sigcontext.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/sigcontext.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/sigcontext.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/sigcontext.h
+ * Definition of sigcontext struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGCONTEXT_H
+#define _ASM_UBICOM32_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+struct sigcontext {
+ struct pt_regs sc_regs;
+};
+
+#endif /* _ASM_UBICOM32_SIGCONTEXT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/siginfo.h linux-2.6.28.10/arch/ubicom32/include/asm/siginfo.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/siginfo.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/siginfo.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/siginfo.h
+ * Generic siginfo.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGINFO_H
+#define _ASM_UBICOM32_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_UBICOM32_SIGINFO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/signal.h linux-2.6.28.10/arch/ubicom32/include/asm/signal.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/signal.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/signal.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,180 @@
+/*
+ * arch/ubicom32/include/asm/signal.h
+ * Signal related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGNAL_H
+#define _ASM_UBICOM32_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_SIGNAL_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/smp.h linux-2.6.28.10/arch/ubicom32/include/asm/smp.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/smp.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/smp.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,83 @@
+/*
+ * arch/ubicom32/include/asm/smp.h
+ * SMP definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SMP_H
+#define _ASM_UBICOM32_SMP_H
+
+#ifndef ASSEMBLY
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/ip5000.h>
+
+typedef unsigned long address_t;
+extern cpumask_t cpu_online_map;
+extern unsigned int smp_ipi_irq;
+
+/*
+ * This magic constant controls our willingness to transfer
+ * a process across CPUs.
+ *
+ * Such a transfer incurs cache and tlb
+ * misses. The current value is inherited from i386. Still needs
+ * to be tuned for parisc.
+ */
+#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */
+#define NO_PROC_ID 0xFF /* No processor magic marker */
+#define ANY_PROC_ID 0xFF /* Any processor magic marker */
+
+#ifdef CONFIG_SMP
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+#endif /* CONFIG_SMP */
+
+static inline int __cpu_disable (void)
+{
+ return 0;
+}
+
+static inline void __cpu_die (unsigned int cpu)
+{
+ while(1) {
+ };
+}
+
+extern int __cpu_up(unsigned int cpu);
+extern void smp_send_timer_all(void);
+extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_set_affinity(unsigned int irq, cpumask_t dest);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ * TODO: Once these are fully tested, we should turn them into
+ * inline macros for performance.
+ */
+extern unsigned long smp_get_affinity(unsigned int irq, int *all);
+extern void smp_reset_ipi(unsigned long mask);
+
+#endif /* !ASSEMBLY */
+#endif /* _ASM_UBICOM32_SMP_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/socket.h linux-2.6.28.10/arch/ubicom32/include/asm/socket.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/socket.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/socket.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,84 @@
+/*
+ * arch/ubicom32/include/asm/socket.h
+ * Socket options definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SOCKET_H
+#define _ASM_UBICOM32_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#endif /* _ASM_UBICOM32_SOCKET_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/sockios.h linux-2.6.28.10/arch/ubicom32/include/asm/sockios.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/sockios.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/sockios.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,40 @@
+/*
+ * arch/ubicom32/include/asm/sockios.h
+ * Socket-level ioctl definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SOCKIOS_H
+#define _ASM_UBICOM32_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_UBICOM32_SOCKIOS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/spinlock.h linux-2.6.28.10/arch/ubicom32/include/asm/spinlock.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/spinlock.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/spinlock.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,293 @@
+/*
+ * arch/ubicom32/include/asm/spinlock.h
+ * Spinlock related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SPINLOCK_H
+#define _ASM_UBICOM32_SPINLOCK_H
+
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/spinlock_types.h>
+
+/*
+ * __raw_spin_lock()
+ * Lock the lock.
+ */
+static inline void __raw_spin_lock(raw_spinlock_t *x)
+{
+ asm volatile (
+ "1: bset %0, %0, #0 \n\t"
+ " jmpne.f 1b \n\t"
+ : "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+}
+
+/*
+ * __raw_spin_unlock()
+ * Unlock the lock.
+ */
+static inline void __raw_spin_unlock(raw_spinlock_t *x)
+{
+ asm volatile (
+ " bclr %0, %0, #0 \n\t"
+ : "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+}
+
+/*
+ * __raw_spin_is_locked()
+ * Test if the lock is locked.
+ */
+static inline int __raw_spin_is_locked(raw_spinlock_t *x)
+{
+ return x->lock;
+}
+
+/*
+ * __raw_spin_unlock_wait()
+ * Wait for the lock to be unlocked.
+ *
+ * Note: the caller has not guarantee that the lock will not
+ * be acquired before they get to it.
+ */
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *x)
+{
+ do {
+ cpu_relax();
+ } while (__raw_spin_is_locked(x));
+}
+
+/*
+ * __raw_spin_trylock()
+ * Try the lock, return 0 on failure, 1 on success.
+ */
+static inline int __raw_spin_trylock(raw_spinlock_t *x)
+{
+ int ret = 0;
+
+ asm volatile (
+ " bset %1, %1, #0 \n\t"
+ " jmpne.f 1f \n\t"
+ " move.4 %0, #1 \n\t"
+ "1: \n\t"
+ : "+r" (ret), "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+
+ return ret;
+}
+
+/*
+ * __raw_spin_lock_flags()
+ * Spin waiting for the lock (enabling IRQ(s))
+ */
+static inline void __raw_spin_lock_flags(raw_spinlock_t *x, unsigned long flags)
+{
+ mb();
+ while (!__raw_spin_trylock(x)) {
+ /*
+ * If the flags from the IRQ are set, interrupts are disabled and we
+ * need to re-enable them.
+ */
+ if (!flags) {
+ cpu_relax();
+ } else {
+ raw_local_irq_enable();
+ cpu_relax();
+ raw_local_irq_disable();
+ }
+ }
+ mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Linux rwlocks are unfair to writers; they can be starved for an indefinite
+ * time by readers. With care, they can also be taken in interrupt context.
+ *
+ * In Ubicom32 architecture implementation, we have a spinlock and a counter.
+ * Readers use the lock to serialise their access to the counter (which
+ * records how many readers currently hold the lock).
+ * Writers hold the spinlock, preventing any readers or other writers from
+ * grabbing the rwlock.
+ */
+
+/*
+ * __raw_read_lock()
+ * Increment the counter in the rwlock.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+ rw->counter++;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * __raw_read_unlock()
+ * Decrement the counter.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+ rw->counter--;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * __raw_read_trylock()
+ * Increment the counter if we can.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ retry:
+ raw_local_irq_save(flags);
+ if (__raw_spin_trylock(&rw->lock)) {
+ rw->counter++;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+ return 1;
+ }
+
+ raw_local_irq_restore(flags);
+
+ /*
+ * If write-locked, we fail to acquire the lock
+ */
+ if (rw->counter < 0) {
+ return 0;
+ }
+
+ /*
+ * Wait until we have a realistic chance at the lock
+ */
+ while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0) {
+ cpu_relax();
+ }
+
+ goto retry;
+}
+
+/*
+ * __raw_write_lock()
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock
+ */
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+retry:
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+
+ if (rw->counter != 0) {
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+
+ while (rw->counter != 0)
+ cpu_relax();
+
+ goto retry;
+ }
+
+ rw->counter = -1; /* mark as write-locked */
+ mb();
+ raw_local_irq_restore(flags);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ rw->counter = 0;
+ __raw_spin_unlock(&rw->lock);
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock */
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ int result = 0;
+
+ raw_local_irq_save(flags);
+ if (__raw_spin_trylock(&rw->lock)) {
+ if (rw->counter == 0) {
+ rw->counter = -1;
+ result = 1;
+ } else {
+ /* Read-locked. Oh well. */
+ __raw_spin_unlock(&rw->lock);
+ }
+ }
+ raw_local_irq_restore(flags);
+
+ return result;
+}
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_read_can_lock(raw_rwlock_t *rw)
+{
+ return rw->counter >= 0;
+}
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_write_can_lock(raw_rwlock_t *rw)
+{
+ return !rw->counter;
+}
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
+#endif /* _ASM_UBICOM32_SPINLOCK_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/spinlock_types.h linux-2.6.28.10/arch/ubicom32/include/asm/spinlock_types.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/spinlock_types.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/spinlock_types.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,43 @@
+/*
+ * arch/ubicom32/include/asm/spinlock_types.h
+ * Spinlock related structure definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SPINLOCK_TYPES_H
+#define _ASM_UBICOM32_SPINLOCK_TYPES_H
+
+typedef struct {
+ volatile unsigned int lock;
+} raw_spinlock_t;
+
+typedef struct {
+ raw_spinlock_t lock;
+ volatile int counter;
+} raw_rwlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
+#define __RAW_RW_LOCK_UNLOCKED { __RAW_SPIN_LOCK_UNLOCKED, 0 }
+
+#endif /* _ASM_UBICOM32_SPINLOCK_TYPES_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/stacktrace.h linux-2.6.28.10/arch/ubicom32/include/asm/stacktrace.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/stacktrace.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/stacktrace.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,72 @@
+/*
+ * arch/ubicom32/include/asm/stacktrace.h
+ * Stacktrace functions for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STACKTRACE_H
+#define _ASM_UBICOM32_STACKTRACE_H
+
+#define between(a, b, c) (( \
+ ((unsigned long) a) >= ((unsigned long) b)) && \
+ (((unsigned long)a) <= ((unsigned long)c)))
+
+/*
+ * These symbols are filled in by the linker.
+ */
+extern unsigned long _stext;
+extern unsigned long _etext;
+
+/* OCM text goes from __ocm_text_run_begin to __data_begin */
+extern unsigned long __ocm_text_run_begin;
+extern unsigned long __data_begin;
+
+/* Account for OCM case - see stacktrace.c maybe combine(also trap.c) */
+/*
+ * ubicom32_is_kernel()
+ *
+ * Check to see if the given address belongs to the kernel.
+ * NOMMU does not permit any other means.
+ */
+static inline int ubicom32_is_kernel(unsigned long addr)
+{
+ int is_kernel = between(addr, &_stext, &_etext) || \
+ between(addr, &__ocm_text_run_begin, &__data_begin);
+
+#ifdef CONFIG_MODULES
+ if (!is_kernel)
+ is_kernel = is_module_address(addr);
+#endif
+ return is_kernel;
+}
+
+extern unsigned long stacktrace_iterate(
+ unsigned long **trace,
+ unsigned long stext, unsigned long etext,
+ unsigned long ocm_stext, unsigned long ocm_etext,
+ unsigned long sstack, unsigned long estack);
+#ifdef CONFIG_STACKTRACE
+void stacktrace_save_entries(struct task_struct *tsk, struct stack_trace *trace, unsigned long sp);
+#endif
+#endif /* _ASM_UBICOM32_STACKTRACE_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/statfs.h linux-2.6.28.10/arch/ubicom32/include/asm/statfs.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/statfs.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/statfs.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/statfs.h
+ * Generic statfs.h definitions
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STATFS_H
+#define _ASM_UBICOM32_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_UBICOM32_STATFS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/stat.h linux-2.6.28.10/arch/ubicom32/include/asm/stat.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/stat.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/stat.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,104 @@
+/*
+ * arch/ubicom32/include/asm/stat.h
+ * File status definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STAT_H
+#define _ASM_UBICOM32_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long __unused1;
+ unsigned long st_mtime;
+ unsigned long __unused2;
+ unsigned long st_ctime;
+ unsigned long __unused3;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[2];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif /* _ASM_UBICOM32_STAT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/string.h linux-2.6.28.10/arch/ubicom32/include/asm/string.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/string.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/string.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/string.h
+ * String operation definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STRING_H
+#define _ASM_UBICOM32_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *b, int c, size_t len);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *to, const void *from, size_t len);
+
+#endif /* _ASM_UBICOM32_STRING_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/system.h linux-2.6.28.10/arch/ubicom32/include/asm/system.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/system.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/system.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,101 @@
+/*
+ * arch/ubicom32/include/asm/system.h
+ * Low level switching definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SYSTEM_H
+#define _ASM_UBICOM32_SYSTEM_H
+
+#include <linux/irqflags.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/ldsr.h>
+#include <asm/irq.h>
+#include <asm/percpu.h>
+#include <asm/ubicom32-common.h>
+#include <asm/processor.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+asmlinkage void resume(void);
+extern void *__switch_to(struct task_struct *prev,
+ struct thread_struct *prev_switch,
+ struct thread_struct *next_switch);
+
+/*
+ * We will need a per linux thread sw_ksp for the switch_to macro to
+ * track the kernel stack pointer for the current thread on that linux thread.
+ */
+#define switch_to(prev,next,last) \
+({ \
+ void *_last; \
+ _last = (void *) \
+ __switch_to(prev, &prev->thread, &next->thread); \
+ (last) = _last; \
+})
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on ubicom32...
+ */
+#define nop() asm volatile ("nop"::)
+#define mb() asm volatile ("" : : :"memory")
+#define rmb() asm volatile ("" : : :"memory")
+#define wmb() asm volatile ("" : : :"memory")
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define read_barrier_depends() ((void)0)
+
+/*
+ * The following defines change how the scheduler calls the switch_to()
+ * macro.
+ *
+ * 1) The first causes the runqueue to be unlocked on entry to
+ * switch_to(). Since our ctx code does not play with the runqueue
+ * we do not need it unlocked.
+ *
+ * 2) The later turns interrupts on during a ctxsw to reduce the latency of
+ * interrupts during ctx. At this point in the port, we believe that this
+ * latency is not a problem since we have very little code to perform a ctxsw.
+ */
+// #define __ARCH_WANT_UNLOCKED_CTXSW
+// #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
+
+#endif /* _ASM_UBICOM32_SYSTEM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/termbits.h linux-2.6.28.10/arch/ubicom32/include/asm/termbits.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/termbits.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/termbits.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,227 @@
+/*
+ * arch/ubicom32/include/asm/termbits.h
+ * Terminal/serial port definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TERMBITS_H
+#define _ASM_UBICOM32_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_UBICOM32_TERMBITS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/termios.h linux-2.6.28.10/arch/ubicom32/include/asm/termios.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/termios.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/termios.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,119 @@
+/*
+ * arch/ubicom32/include/asm/termios.h
+ * Ubicom32 termio definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TERMIOS_H
+#define _ASM_UBICOM32_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ unsigned short tmp; \
+ get_user(tmp, &(termio)->c_iflag); \
+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+ get_user(tmp, &(termio)->c_oflag); \
+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+ get_user(tmp, &(termio)->c_cflag); \
+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+ get_user(tmp, &(termio)->c_lflag); \
+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+ get_user((termios)->c_line, &(termio)->c_line); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_TERMIOS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/thread-asm.h linux-2.6.28.10/arch/ubicom32/include/asm/thread-asm.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/thread-asm.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/thread-asm.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/thread-asm.h
+ * Ubicom32 architecture specific thread definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_THREAD_ASM_H
+#define _ASM_UBICOM32_THREAD_ASM_H
+
+/*
+ * thread_get_self
+ * Read and shift the current thread into reg
+ */
+.macro thread_get_self reg
+ lsr.4 \reg, ROSR, #2
+ and.4 \reg, #31, \reg /* Mask to get thread number into register */
+.endm
+
+/*
+ * thread_get_self_mask
+ * Read and shift the current thread mask into reg
+ */
+.macro thread_get_self_mask reg
+ lsr.4 \reg, ROSR, #2
+ lsl.4 \reg, #1, \reg /* Thread bit */
+.endm
+
+#endif /* _ASM_UBICOM32_THREAD_ASM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/thread.h linux-2.6.28.10/arch/ubicom32/include/asm/thread.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/thread.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/thread.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,313 @@
+/*
+ * arch/ubicom32/include/asm/thread.h
+ * Ubicom32 architecture specific thread definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_THREAD_H
+#define _ASM_UBICOM32_THREAD_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <asm/ptrace.h>
+#include <asm/ubicom32-common.h>
+
+typedef int thread_t;
+typedef unsigned char thread_type_t;
+typedef void (*thread_exec_fn_t)(void *arg);
+
+#define THREAD_NULL 0x40
+#define THREAD_TYPE_HRT (1 << 0)
+#define THREAD_TYPE_SPECIAL 0
+#define THREAD_TYPE_NORMAL 0
+#define THREAD_TYPE_BACKGROUND (1 << 1)
+
+/*
+ * This is the upper bound on the maximum hardware threads that one will find
+ * on a Ubicom processor. It is used to size per hardware thread data structures.
+ */
+#define THREAD_ARCHITECTURAL_MAX 16
+
+/*
+ * TODO: Rename this at some point to be thread_
+ */
+extern unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
+
+
+/*
+ * thread_get_self()
+ */
+static inline thread_t thread_get_self(void)
+{
+ thread_t result;
+ asm (
+ "lsr.4 %0, ROSR, #2 \n\t"
+ : "=d" (result)
+ :
+ : "cc"
+ );
+ return result & 31;
+}
+
+/*
+ * thread_suspend()
+ */
+static inline void thread_suspend(void)
+{
+ asm volatile (
+ "suspend\n\t"
+ :
+ :
+ );
+}
+
+/*
+ * thread_resume()
+ */
+static inline void thread_resume(thread_t thread)
+{
+ asm volatile (
+ "move.4 MT_ACTIVE_SET, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (1 << thread)
+ );
+}
+
+
+
+/*
+ * thread_enable_mask()
+ * Enable all threads in the mask.
+ *
+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
+ */
+static inline void thread_enable_mask(unsigned int mask)
+{
+ /*
+ * must flush the pipeline twice.
+ * first pipe_flush is to ensure write to MT_EN is completed
+ * second one is to ensure any new instructions from
+ * the targeted thread (the one being disabled), that
+ * are issued while the write to MT_EN is being executed,
+ * are completed.
+ */
+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
+ asm volatile (
+ "or.4 MT_EN, MT_EN, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (mask)
+ : "cc"
+ );
+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
+}
+
+/*
+ * thread_enable()
+ */
+static inline void thread_enable(thread_t thread)
+{
+ thread_enable_mask(1 << thread);
+}
+
+/*
+ * thread_disable_mask()
+ * Disable all threads in the mask.
+ *
+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
+ */
+static inline void thread_disable_mask(unsigned int mask)
+{
+ /*
+ * must flush the pipeline twice.
+ * first pipe_flush is to ensure write to MT_EN is completed
+ * second one is to ensure any new instructions from
+ * the targeted thread (the one being disabled), that
+ * are issued while the write to MT_EN is being executed,
+ * are completed.
+ */
+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
+ asm volatile (
+ "and.4 MT_EN, MT_EN, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (~mask)
+ : "cc"
+ );
+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
+}
+
+/*
+ * thread_disable()
+ */
+static inline void thread_disable(thread_t thread)
+{
+ thread_disable_mask(1 << thread);
+}
+
+/*
+ * thread_disable_others()
+ * Disable all other threads
+ */
+static inline void thread_disable_others(void)
+{
+ thread_t self = thread_get_self();
+ thread_disable_mask(~(1 << self));
+}
+
+/*
+ * thread_is_trapped()
+ * Is the specified tid trapped?
+ */
+static inline int thread_is_trapped(thread_t tid)
+{
+ int thread_mask = (1 << tid);
+ int trap_thread;
+
+ asm (
+ "move.4 %0, MT_TRAP \n\t"
+ : "=d" (trap_thread)
+ :
+ );
+ return (trap_thread & thread_mask);
+}
+
+/*
+ * thread_is_enabled()
+ * Is the specified tid enabled?
+ */
+static inline int thread_is_enabled(thread_t tid)
+{
+ int thread_mask = (1 << tid);
+ int enabled_threads;
+
+ asm (
+ "move.4 %0, MT_EN \n\t"
+ : "=d" (enabled_threads)
+ :
+ );
+ return (enabled_threads & thread_mask);
+}
+
+/*
+ * thread_get_instruction_count()
+ */
+static inline unsigned int thread_get_instruction_count(void)
+{
+ unsigned int result;
+ asm (
+ "move.4 %0, INST_CNT \n\t"
+ : "=r" (result)
+ );
+ return result;
+}
+
+/*
+ * thread_get_pc()
+ * pc could point to a speculative and cancelled instruction unless thread is disabled
+ */
+static inline void *thread_get_pc(thread_t thread)
+{
+ void *result;
+ asm (
+ "move.4 csr, %1 \n\t"
+ "setcsr_flush 0 \n\t"
+ "move.4 %0, pc \n\t"
+ "move.4 csr, #0 \n\t"
+ "setcsr_flush 0 \n\t"
+ : "=r" (result)
+ : "r" ((thread << 9) | (1 << 8))
+ );
+ return result;
+}
+
+/*
+ * thread_get_trap_cause()
+ * This should be called only when the thread is not running
+ */
+static inline unsigned int thread_get_trap_cause(thread_t thread)
+{
+ unsigned int result;
+ asm (
+ "move.4 csr, %1 \n\t"
+ "setcsr_flush 0 \n\t"
+ "move.4 %0, trap_cause \n\t"
+ "move.4 csr, #0 \n\t"
+ "setcsr_flush 0 \n\t"
+ : "=r" (result)
+ : "r" ((thread << 9) | (1 << 8))
+ );
+ return result;
+}
+
+/*
+ * THREAD_STALL macro.
+ */
+#define THREAD_STALL \
+ asm volatile ( \
+ "move.4 mt_dbg_active_clr, #-1 \n\t" \
+ "pipe_flush 0 \n\t" \
+ : \
+ : \
+ )
+
+extern unsigned int thread_get_mainline(void);
+extern void thread_set_mainline(thread_t tid);
+extern thread_t thread_alloc(void);
+extern thread_t thread_start(thread_t thread, thread_exec_fn_t exec, void *arg, unsigned int *sp_high, thread_type_t type);
+
+/*
+ * asm macros
+ */
+asm (
+/*
+ * thread_get_self
+ * Read and shift the current thread into reg
+ */
+".macro thread_get_self reg \n\t"
+" lsr.4 \\reg, ROSR, #2 \n\t"
+" and.4 \\reg, #31, \\reg \n\t"/* Mask to get thread number into
+ * register */
+".endm \n\t"
+
+/*
+ * thread_get_self_mask
+ * Read and shift the current thread mask into reg
+ */
+".macro thread_get_self_mask reg \n\t"
+" lsr.4 \\reg, ROSR, #2 \n\t"
+" lsl.4 \\reg, #1, \\reg \n\t" /* Thread bit */
+".endm \n\t"
+ );
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/thread-asm.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_THREAD_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/thread_info.h linux-2.6.28.10/arch/ubicom32/include/asm/thread_info.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/thread_info.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/thread_info.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,134 @@
+/*
+ * arch/ubicom32/include/asm/thread_info.h
+ * Ubicom32 architecture low-level thread information.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_THREAD_INFO_H
+#define _ASM_UBICOM32_THREAD_INFO_H
+
+#include <asm/page.h>
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ int interrupt_nesting; /* Interrupt nesting level. */
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .interrupt_nesting = 0, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+
+ asm (
+ "and.4 %0, sp, %1\n\t"
+ : "=&r" (ti)
+ : "d" (~(THREAD_SIZE-1))
+ : "cc"
+ );
+
+ return ti;
+}
+
+#define STACK_WARN (THREAD_SIZE / 8)
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR 1
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_THREAD_INFO_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/timex.h linux-2.6.28.10/arch/ubicom32/include/asm/timex.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/timex.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/timex.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,56 @@
+/*
+ * arch/ubicom32/include/asm/timex.h
+ * Ubicom32 architecture timex specifications.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TIMEX_H
+#define _ASM_UBICOM32_TIMEX_H
+
+#define CLOCK_TICK_RATE 266000000
+
+// #define ARCH_HAS_READ_CURRENT_TIMER
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+extern int timer_alloc(void);
+extern void timer_set(int timervector, unsigned int cycles);
+extern int timer_reset(int timervector, unsigned int cycles);
+extern void timer_tick_init(void);
+extern void timer_device_init(void);
+
+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+extern void local_timer_interrupt(void);
+#endif
+
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+extern int local_timer_setup(unsigned int cpu);
+#endif
+
+#endif /* _ASM_UBICOM32_TIMEX_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/tlbflush.h linux-2.6.28.10/arch/ubicom32/include/asm/tlbflush.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/tlbflush.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/tlbflush.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,79 @@
+/*
+ * arch/ubicom32/include/asm/tlbflush.h
+ * TLB operations for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TLB_FLUSH_H
+#define _ASM_UBICOM32_TLB_FLUSH_H
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+ BUG();
+}
+
+#endif /* _ASM_UBICOM32_TLB_FLUSH_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/tlb.h linux-2.6.28.10/arch/ubicom32/include/asm/tlb.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/tlb.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/tlb.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,47 @@
+/*
+ * arch/ubicom32/include/asm/tlb.h
+ * Ubicom32 architecture TLB operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TLB_H
+#define _ASM_UBICOM32_TLB_H
+
+/*
+ * ubicom32 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_UBICOM32_TLB_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/topology.h linux-2.6.28.10/arch/ubicom32/include/asm/topology.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/topology.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/topology.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/topology.h
+ * Generic topology.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TOPOLOGY_H
+#define _ASM_UBICOM32_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_UBICOM32_TOPOLOGY_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/traps.h linux-2.6.28.10/arch/ubicom32/include/asm/traps.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/traps.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/traps.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/traps.h
+ * Trap related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_TRAPS_H
+#define _ASM_UBICOM32_TRAPS_H
+
+/*
+ * Trap causes passed from ultra to Host OS
+ */
+#define TRAP_CAUSE_TOTAL 13
+#define TRAP_CAUSE_DST_RANGE_ERR 12
+#define TRAP_CAUSE_SRC1_RANGE_ERR 11
+#define TRAP_CAUSE_I_RANGE_ERR 10
+#define TRAP_CAUSE_DCAPT 9
+#define TRAP_CAUSE_DST_SERROR 8
+#define TRAP_CAUSE_SRC1_SERROR 7
+#define TRAP_CAUSE_DST_MISALIGNED 6
+#define TRAP_CAUSE_SRC1_MISALIGNED 5
+#define TRAP_CAUSE_DST_DECODE_ERR 4
+#define TRAP_CAUSE_SRC1_DECODE_ERR 3
+#define TRAP_CAUSE_ILLEGAL_INST 2
+#define TRAP_CAUSE_I_SERROR 1
+#define TRAP_CAUSE_I_DECODE_ERR 0
+
+extern void trap_handler(int irq, struct pt_regs *regs);
+extern void trap_init_interrupt(void);
+extern void unaligned_emulate(unsigned int thread);
+extern int unaligned_only(unsigned int cause);
+
+#endif /* _ASM_UBICOM32_TRAPS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/types.h linux-2.6.28.10/arch/ubicom32/include/asm/types.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/types.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/types.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,75 @@
+/*
+ * arch/ubicom32/include/asm/types.h
+ * Date type definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TYPES_H
+#define _ASM_UBICOM32_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* DMA addresses are always 32-bits wide */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+/*
+ * XXX These are "Ubicom style" typedefs. They should be removed in all files used by linux.
+ */
+typedef u32 u32_t;
+typedef s32 s32_t;
+typedef u16 u16_t;
+typedef s16 s16_t;
+typedef u8 u8_t;
+typedef s8 s8_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_TYPES_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/uaccess.h linux-2.6.28.10/arch/ubicom32/include/asm/uaccess.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/uaccess.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/uaccess.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,347 @@
+/*
+ * arch/ubicom32/include/asm/uaccess.h
+ * User space memory access functions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * arch/alpha
+ */
+#ifndef _ASM_UBICOM32_UACCESS_H
+#define _ASM_UBICOM32_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/*
+ * Ubicom32 does not currently support the exception table handling.
+ */
+extern unsigned long search_exception_table(unsigned long);
+
+
+#if defined(CONFIG_ACCESS_OK_CHECKS_ENABLED)
+extern int __access_ok(unsigned long addr, unsigned long size);
+#else
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+ return 1;
+}
+#endif
+#define access_ok(type, addr, size) \
+ likely(__access_ok((unsigned long)(addr), (size)))
+
+/*
+ * The following functions do not exist. They keep callers
+ * of put_user and get_user from passing unsupported argument
+ * types. They result in a link time error.
+ */
+extern int __put_user_bad(void);
+extern int __get_user_bad(void);
+
+/*
+ * __put_user_no_check()
+ * Put the requested data into the user space verifying the address
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define __put_user_no_check(x, ptr, size) \
+({ \
+ int __pu_err = 0; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ *__pu_addr = (__typeof__(*(ptr)))x; \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+
+/*
+ * __put_user_check()
+ * Put the requested data into the user space verifying the address
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer.
+ */
+#define __put_user_check(x, ptr, size) \
+({ \
+ int __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \
+ __pu_err = 0; \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ *__pu_addr = (__typeof__(*(ptr)))x; \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ } \
+ __pu_err; \
+})
+
+/*
+ * __get_user_no_check()
+ * Read the value at ptr into x.
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer. If the caller passes a modifying argument for ptr (e.g. x++)
+ * this macro will not work.
+ */
+#define __get_user_no_check(x, ptr, size) \
+({ \
+ int __gu_err = 0; \
+ __typeof__((x)) __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ __gu_val = (__typeof__((x)))*(__gu_addr); \
+ break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ (x) = 0; \
+ break; \
+ } \
+ (x) = __gu_val; \
+ __gu_err; \
+})
+
+/*
+ * __get_user_check()
+ * Read the value at ptr into x.
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer.
+ */
+#define __get_user_check(x, ptr, size) \
+({ \
+ int __gu_err = -EFAULT; \
+ __typeof__(x) __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ if (access_ok(VERIFY_READ, __gu_addr, size)) { \
+ __gu_err = 0; \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ __gu_val = (__typeof__((x)))*(__gu_addr); \
+ break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ (x) = 0; \
+ break; \
+ } \
+ } \
+ (x) = __gu_val; \
+ __gu_err; \
+})
+
+/*
+ * The "xxx" versions are allowed to perform some amount of address
+ * space checking. See access_ok().
+ */
+#define put_user(x,ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
+#define get_user(x,ptr) \
+ __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+ __put_user_no_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+ __get_user_no_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __copy_tofrom_user_no_check()
+ * Copy the data either to or from user space.
+ *
+ * Return the number of bytes NOT copied.
+ */
+static inline unsigned long
+__copy_tofrom_user_no_check(void *to, const void *from, unsigned long n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+/*
+ * copy_to_user()
+ * Copy the kernel data to user space.
+ *
+ * Return the number of bytes that were copied.
+ */
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n)) {
+ return n;
+ }
+ return __copy_tofrom_user_no_check((__force void *)to, from, n);
+}
+
+/*
+ * copy_from_user()
+ * Copy the user data to kernel space.
+ *
+ * Return the number of bytes that were copied. On error, we zero
+ * out the destination.
+ */
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ if (!access_ok(VERIFY_READ, from, n)) {
+ return n;
+ }
+ return __copy_tofrom_user_no_check(to, (__force void *)from, n);
+}
+
+#define __copy_to_user(to, from, n) \
+ __copy_tofrom_user_no_check((__force void *)to, from, n)
+#define __copy_from_user(to, from, n) \
+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
+#define __copy_to_user_inatomic(to, from, n) \
+ __copy_tofrom_user_no_check((__force void *)to, from, n)
+#define __copy_from_user_inatomic(to, from, n) \
+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
+
+#define copy_to_user_ret(to, from, n, retval) \
+ ({ if (copy_to_user(to, from, n)) return retval; })
+
+#define copy_from_user_ret(to, from, n, retval) \
+ ({ if (copy_from_user(to, from, n)) return retval; })
+
+/*
+ * strncpy_from_user()
+ * Copy a null terminated string from userspace.
+ *
+ * dst - Destination in kernel space. The buffer must be at least count.
+ * src - Address of string in user space.
+ * count - Maximum number of bytes to copy (including the trailing NULL).
+ *
+ * Returns the length of the string (not including the trailing NULL. If
+ * count is smaller than the length of the string, we copy count bytes
+ * and return count.
+ *
+ */
+static inline long strncpy_from_user(char *dst, const __user char *src, long count)
+{
+ char *tmp;
+ if (!access_ok(VERIFY_READ, src, 1)) {
+ return -EFAULT;
+ }
+
+ strncpy(dst, src, count);
+ for (tmp = dst; *tmp && count > 0; tmp++, count--) {
+ ;
+ }
+ return(tmp - dst);
+}
+
+/*
+ * strnlen_user()
+ * Return the size of a string (including the ending 0)
+ *
+ * Return -EFAULT on exception, a value greater than <n> if too long
+ */
+static inline long strnlen_user(const __user char *src, long n)
+{
+ if (!access_ok(VERIFY_READ, src, 1)) {
+ return -EFAULT;
+ }
+ return(strlen(src) + 1);
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * __clear_user()
+ * Zero Userspace
+ */
+static inline unsigned long __clear_user(__user void *to, unsigned long n)
+{
+ memset(to, 0, n);
+ return 0;
+}
+
+/*
+ * clear_user()
+ * Zero user space (check for valid addresses)
+ */
+static inline unsigned long clear_user(__user void *to, unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n)) {
+ return -EFAULT;
+ }
+ return __clear_user(to, n);
+}
+
+#endif /* _ASM_UBICOM32_UACCESS_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ubicom32-common-asm.h linux-2.6.28.10/arch/ubicom32/include/asm/ubicom32-common-asm.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ubicom32-common-asm.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ubicom32-common-asm.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-common-asm.h
+ * Ubicom32 atomic lock operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
+#define _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
+
+/*
+ * atomic_lock_acquire macro
+ * Equivalent to __atomic_lock_acquire()
+ */
+.macro atomic_lock_acquire
+ bset scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
+ jmpne.f .-4
+.endm
+
+/*
+ * atomic_lock_release macro
+ * Equivalent to __atomic_lock_release()
+ */
+.macro atomic_lock_release
+ bclr scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
+.endm
+
+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_ASM_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ubicom32-common.h linux-2.6.28.10/arch/ubicom32/include/asm/ubicom32-common.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ubicom32-common.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ubicom32-common.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-common.h
+ * Ubicom32 atomic lock operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_H
+#define _ASM_UBICOM32_UBICOM32_COMMON_H
+
+#define S(arg) #arg
+#define D(arg) S(arg)
+/*
+ * scratchpad1 is owned by the LDSR.
+ *
+ * The upper bits provide 16 global spinlocks. Acquiring one of these
+ * global spinlocks synchornizes across multiple threads and prevents
+ * the LDSR from delivering any interrupts while the lock is held.
+ * Use these locks only when absolutely required.
+ *
+ * The lower 16 bits of scratchpad1 are used as per thread interrupt
+ * enable/disable bits. These bits will prevent a thread from receiving
+ * any interrupts.
+ *
+ * Bit Usage:
+ * - MT_EN_LOCK_BIT - Protects writes to MT_EN, so code can read current value
+ * then write a new value atomically (profiler for example)
+ * - ATOMIC_LOCK_BIT - Used to provide general purpose atomic handling.
+ * - LDSR_LOCK_BIT - Used by the LDSR exclusively to provide protection.
+ * - LSB 16 bits - Used by the LDSR to represent thread enable/disable bits.
+ */
+#define MT_EN_LOCK_BIT 31
+#define ATOMIC_LOCK_BIT 30
+#define LDSR_LOCK_BIT 29
+#define PCI_LOCK_BIT 28
+
+#if !defined(__ASSEMBLY__)
+
+#define UBICOM32_TRYLOCK(bit) \
+ asm volatile ( \
+ " move.4 %0, #0 \n\t" \
+ " bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ " jmpne.f 1f \n\t" \
+ " move.4 %0, #1 \n\t" \
+ "1: \n\t" \
+ : "=r" (ret) \
+ : \
+ : "cc", "memory" \
+ ); \
+
+#define UBICOM32_UNLOCK(bit) \
+ asm volatile ( \
+ " bclr scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ : \
+ : \
+ : "cc", "memory" \
+ ); \
+
+#define UBICOM32_LOCK(bit) \
+ asm volatile ( \
+ "1: bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ " jmpne.f 1b \n\t" \
+ : \
+ : \
+ : "cc", "memory" \
+ ); \
+
+/*
+ * __atomic_lock_trylock()
+ * Attempt to acquire the lock, return TRUE if acquired.
+ */
+static inline int __atomic_lock_trylock(void)
+{
+ int ret;
+ UBICOM32_TRYLOCK(ATOMIC_LOCK_BIT);
+ return ret;
+}
+
+/*
+ * __atomic_lock_release()
+ * Release the global atomic lock.
+ *
+ * Note: no one is suspended waiting since this lock is a spinning lock.
+ */
+static inline void __atomic_lock_release(void)
+{
+ UBICOM32_UNLOCK(ATOMIC_LOCK_BIT);
+}
+
+/*
+ * __atomic_lock_acquire()
+ * Acquire the global atomic lock, spin if not available.
+ */
+static inline void __atomic_lock_acquire(void)
+{
+ UBICOM32_LOCK(ATOMIC_LOCK_BIT);
+}
+#else /* __ASSEMBLY__ */
+
+#include <asm/ubicom32-common-asm.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/ucontext.h linux-2.6.28.10/arch/ubicom32/include/asm/ucontext.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/ucontext.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/ucontext.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/ucontext.h
+ * Definition of ucontext structure for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UCONTEXT_H
+#define _ASM_UBICOM32_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UBICOM32_UCONTEXT_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/unaligned.h linux-2.6.28.10/arch/ubicom32/include/asm/unaligned.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/unaligned.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/unaligned.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/unaligned.h
+ * Ubicom32 architecture unaligned memory access definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * TODO: This is a copy of arm unaligned handling that probably needs
+ * to be optimized for UBICOM32, but it works for now.
+ */
+
+#ifndef _ASM_UBICOM32_UNALIGNED_H
+#define _ASM_UBICOM32_UNALIGNED_H
+
+#include <asm/types.h>
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* _ASM_UBICOM32_UNALIGNED_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/unistd.h linux-2.6.28.10/arch/ubicom32/include/asm/unistd.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/unistd.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/unistd.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,400 @@
+/*
+ * arch/ubicom32/include/asm/unistd.h
+ * Ubicom32 architecture syscall definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UNISTD_H
+#define _ASM_UBICOM32_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+//#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#define cond_syscall(x) long x(void) __attribute__((weak,alias("sys_ni_syscall")))
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_UNISTD_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/user.h linux-2.6.28.10/arch/ubicom32/include/asm/user.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/user.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/user.h 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,82 @@
+/*
+ * arch/ubicom32/include/asm/user.h
+ * Ubicom32 architecture core file definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_USER_H
+#define _ASM_UBICOM32_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+/*
+ * Adapted from <asm-powerpc/user.h>
+ *
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
+ * are as follows:
+ *
+ * upage: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page long.
+ * data: The data segment follows next. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * stack: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these in order to be able
+ * to write an integer number of pages.
+ */
+
+struct user_ubicom32fp_struct {
+};
+
+struct user {
+ struct pt_regs regs; /* entire machine state */
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ unsigned long u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_UBICOM32_USER_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/include/asm/xor.h linux-2.6.28.10/arch/ubicom32/include/asm/xor.h
--- linux-2.6.28.10_o/arch/ubicom32/include/asm/xor.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/include/asm/xor.h 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/xor.h
+ * Generic xor.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_XOR_H
+#define _ASM_UBICOM32_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif /* _ASM_UBICOM32_XOR_H */
diff -ruN linux-2.6.28.10_o/arch/ubicom32/Kconfig linux-2.6.28.10/arch/ubicom32/Kconfig
--- linux-2.6.28.10_o/arch/ubicom32/Kconfig 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/Kconfig 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,457 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "uClinux/ubicom32 (w/o MMU) Kernel Configuration"
+
+config RAMBASE
+ hex
+ default "0x40000000"
+ help
+ Define the address that RAM starts at.
+
+config UBICOM32
+ bool
+ select HAVE_OPROFILE
+ default y
+
+config RAMKERNEL
+ bool
+ default y
+
+config CPU_BIG_ENDIAN
+ bool
+ default y
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "14"
+
+config HAVE_CLK
+ bool
+ default y
+
+config MMU
+ bool
+ default n
+
+config FPU
+ bool
+ default n
+
+config ZONE_DMA
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_GPIO
+ bool
+ default y
+
+config GPIOLIB
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config GENERIC_TIME
+ bool
+ default y
+
+config TIME_LOW_RES
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+ depends on GENERIC_CLOCKEVENTS
+ default y if SMP && !LOCAL_TIMERS
+
+config NO_IOPORT
+ def_bool y
+
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
+config IRQ_PER_CPU
+ bool
+ default y
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+ bool
+ default y
+
+menu "Processor type and features"
+
+config BRD_32MB
+ bool
+ depends on IP5160EVAL
+ help
+ Board has 32MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+config BRD_64MB
+ bool
+ depends on IP7145DPF || IP7160RGW || IP7160BRINGUP || IP7160DPF || IP5170DPF || IP5160DEV
+ help
+ Board has 64MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+config BRD_128MB
+ bool
+ depends on IP7500MODULE || IP7500AV || IP7500MEDIA
+ help
+ Board has 128MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+comment "Processor type will be selected by Board"
+
+config UBICOM32_V3
+ bool
+ help
+ Ubicom IP5xxx series processor support.
+
+config UBICOM32_V4
+ bool
+ help
+ Ubicom IP7xxx series processor support.
+
+comment "Board"
+choice
+ prompt "Board type"
+ help
+ Select your board.
+
+config NOBOARD
+ bool "No board selected"
+ help
+ Default. Don't select any board specific config. Will not build unless you change!
+
+# Add your boards here
+source "arch/ubicom32/mach-ip5k/Kconfig"
+source "arch/ubicom32/mach-ip7k/Kconfig"
+
+endchoice
+
+comment "Kernel Options"
+config SMP
+ bool "Symmetric multi-processing support"
+ select USE_GENERIC_SMP_HELPERS
+ default n
+ help
+ Enables multithreading support. Enabling SMP support increases
+ the size of system data structures. SMP support can have either
+ positive or negative impact on performance depending on workloads.
+
+ If you do not know what to do here, say N.
+
+config NR_CPUS
+ int "Number of configured CPUs"
+ range 2 32
+ default 2
+ depends on SMP
+ help
+ Upper bound on the number of CPUs. Space is reserved
+ at compile time for this many CPUs.
+
+config LOCAL_TIMERS
+ bool "Use local timer interrupts"
+ depends on SMP
+ default y
+ help
+ Enable support for local timers on SMP platforms, rather then the
+ legacy IPI broadcast method. Local timers allows the system
+ accounting to be spread across the timer interval, preventing a
+ "thundering herd" at every timer tick. A physical timer is allocated
+ per cpu.
+
+config TIMER_EXTRA_ALLOC
+ int "Number of additional physical timer events to create"
+ depends on GENERIC_CLOCKEVENTS
+ default 0
+ help
+ The Ubicom32 processor has a number of event timers that can be wrapped
+ in Linux clock event structures (assuming that the timers are not being
+ used for another purpose). Based on the value of LOCAL_TIMERS, either
+ 2 timers will be used or a timer will be used for every CPU. This value
+ allows the programmer to select additional timers over that amount.
+
+config IRQSTACKS
+ bool "Create separate stacks for interrupt handling"
+ default n
+ help
+ Selecting this causes interrupts to be created on a separate
+ stack instead of nesting the interrupts on the kernel stack.
+
+config IRQSTACKS_USEOCM
+ bool "Use OCM for interrupt stacks"
+ default n
+ depends on IRQSTACKS
+ help
+ Selecting this cause the interrupt stacks to be placed in OCM
+ reducing cache misses at the expense of using the OCM for servicing
+ interrupts.
+
+menu "OCM Instruction Heap"
+
+config OCM_MODULES_RESERVATION
+ int "OCM Instruction heap reservation. 0-192 kB"
+ range 0 192
+ default "0"
+ help
+ The minimum amount of OCM memory to reserve for kernel loadable module
+ code. If you are not using this memory it cannot be used for anything
+ else. Leave it as 0 if you have prebuilt modules that are compiled with
+ OCM support.
+
+config OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
+ bool "Give all unused ocm code space to the ocm instruction heap."
+ default n
+ help
+ Allow the OCM instruction heap allocation to consume any remaining
+ unused OCM code space. The result of this is that you will not have
+ and deterministic results, but you will not have any waste either.
+
+config OCM_MODULES_FALLBACK_TO_DDR
+ bool "Loadable Modules requiring OCM may fallback to use DDR."
+ default n
+ help
+ If a module cannot get the OCM code it requires allow DDR to
+ be used instead.
+endmenu
+
+config HZ
+ int "Frequency of 'jiffies' (for polling)"
+ default 1000
+ help
+ 100 is common for embedded systems, but 1000 allows
+ you to do more drivers without actually having
+ interrupts working properly.
+
+comment "RAM configuration"
+
+if BRD_32MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x02000000
+ default "0x02000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+if BRD_64MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x04000000
+ default "0x04000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+if BRD_128MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x08000000
+ default "0x08000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+config KERNELBASE
+ hex "Address of the base of kernel code"
+ default "0x40400000"
+ help
+ For the time being we are going to start the Kernel at a 4 meg offset.
+
+comment "Build options"
+config LINKER_RELAXATION
+ bool "Linker Relaxation"
+ default y
+ help
+ Turns on linker relaxation that will produce smaller
+ faster code. Increases link time.
+
+comment "Driver options"
+menu "PCI Bus"
+config PCI
+ bool "PCI bus"
+ default true
+ help
+ Enable/Disable PCI bus
+ source "drivers/pci/Kconfig"
+
+
+config PCI_DEV0_IDSEL
+ hex "slot 0 address"
+ depends on PCI
+ default "0x01000000"
+ help
+ Slot 0 address. This address should correspond to the address line
+ which the IDSEL bit for this slot is connected to.
+
+config PCI_DEV1_IDSEL
+ hex "slot 1 address"
+ depends on PCI
+ default "0x02000000"
+ help
+ Slot 1 address. This address should correspond to the address line
+ which the IDSEL bit for this slot is connected to.
+endmenu
+# End PCI
+
+menu "Input devices"
+config UBICOM_INPUT
+ bool "Ubicom polled GPIO input driver"
+ select INPUT
+ select INPUT_POLLDEV
+ help
+ Polling input driver, much like the GPIO input driver, except that it doesn't
+ rely on interrupts. It will report events via the input subsystem.
+ default n
+
+config UBICOM_INPUT_I2C
+ bool "Ubicom polled GPIO input driver over I2C"
+ select INPUT
+ select INPUT_POLLDEV
+ help
+ Polling input driver, much like the PCA953x driver, it can support a variety of
+ different I2C I/O expanders. This device polls the I2C I/O expander for events
+ and reports them via the input subsystem.
+ default n
+endmenu
+# Input devices
+
+
+
+menu "Misc devices"
+config UBICOM_HID
+ bool "Ubicom HID driver"
+ select INPUT
+ select INPUT_POLLDEV
+ select LCD_CLASS_DEVICE
+ help
+ Driver for HID chip found on some Ubicom reference designs. This chip handles
+ PWM, button input, and IR remote control. It registers as an input device and
+ a backlight device.
+ default n
+endmenu
+# Misc devices
+
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ default n
+ help
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (i.e. non-embedded)
+ should leave this option set to 'N'.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, it is appended to this string to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ default n
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+
+endmenu
+# End Processor type and features
+
+source "arch/ubicom32/Kconfig.debug"
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "init/Kconfig"
+source "kernel/Kconfig.preempt"
+source "kernel/time/Kconfig"
+source "mm/Kconfig"
+source "net/Kconfig"
+source "drivers/Kconfig"
+source "fs/Kconfig"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
diff -ruN linux-2.6.28.10_o/arch/ubicom32/Kconfig.debug linux-2.6.28.10/arch/ubicom32/Kconfig.debug
--- linux-2.6.28.10_o/arch/ubicom32/Kconfig.debug 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/Kconfig.debug 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,117 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+config PROTECT_KERNEL
+ default y
+ bool 'Enable Kernel range register Protection'
+ help
+ Adds code to enable/disable range registers to protect static
+ kernel code/data from userspace. Currently the ranges covered
+ do no protect kernel loadable modules or dynamically allocated
+ kernel data.
+
+config NO_KERNEL_MSG
+ bool "Suppress Kernel BUG Messages"
+ help
+ Do not output any debug BUG messages within the kernel.
+
+config EARLY_PRINTK
+ bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
+ default n
+ help
+ If you want to use the serdes driver (console=ttyUS0) for
+ early printk, you must also supply an additional kernel boot
+ parameter like this:
+
+ serdes=ioportaddr,irq,clockrate,baud
+
+ For an IP7160RGW eval board, you could use this:
+
+ serdes=0x2004000,61,250000000,57600
+
+ which will let you see early printk output at 57600 baud.
+
+config STOP_ON_TRAP
+ bool "Enable stopping at the LDSR for all traps"
+ default n
+ help
+ Cause the LDSR to stop all threads whenever a trap is about to be serviced
+
+config STOP_ON_BUG
+ bool "Enable stopping on failed BUG_ON()"
+ default n
+ help
+ Cause all BUG_ON failures to stop all threads
+
+config DEBUG_IRQMEASURE
+ bool "Enable IRQ handler measurements"
+ default n
+ help
+ When enabled each IRQ's min/avg/max times will be printed. If the handler
+ re-enables interrupt, the times will show the full time including to service
+ nested interrupts. See /proc/irq_measurements.
+
+config DEBUG_PCIMEASURE
+ bool "Enable PCI transaction measurements"
+ default n
+ help
+ When enabled the system will measure the min/avg/max timer for each PCI transactions.
+ See /proc/pci_measurements.
+
+config ACCESS_OK_CHECKS_ENABLED
+ bool "Enable user space access checks"
+ default n
+ help
+ Enabling this check causes the kernel to verify that addresses passed
+ to the kernel by the user space code are within the processes
+ address space. On a no-mmu system, this is done by examining the
+ processes memory data structures (adversly affecting performance) but
+ ensuring that a process does not ask the kernel to violate another
+ processes address space. Sadly, the kernel uses access_ok() for
+ address that are in the kernel which results in a large volume of
+ false positives.
+
+choice
+ prompt "Unaligned Access Support"
+ default UNALIGNED_ACCESS_ENABLED
+ help
+ Kernel / Userspace unaligned access handling.
+
+config UNALIGNED_ACCESS_ENABLED
+ bool "Kernel and Userspace"
+ help
+
+config UNALIGNED_ACCESS_USERSPACE_ONLY
+ bool "Userspace Only"
+ help
+
+config UNALIGNED_ACCESS_DISABLED
+ bool "Disabled"
+ help
+
+endchoice
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ default n
+ depends on DEBUG_KERNEL
+ help
+ This option will cause messages to be printed if free kernel stack space
+ drops below a certain limit (THREAD_SIZE /8).
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ default n
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free kernel stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+source "lib/Kconfig.debug"
+
+endmenu
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/kernel/asm-offsets.c linux-2.6.28.10/arch/ubicom32/kernel/asm-offsets.c
--- linux-2.6.28.10_o/arch/ubicom32/kernel/asm-offsets.c 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/kernel/asm-offsets.c 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,162 @@
+/*
+ * arch/ubicom32/kernel/asm-offsets.c
+ * Ubicom32 architecture definitions needed by assembly language modules.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+ /* offsets into the task struct */
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+ /* offsets into the kernel_stat struct */
+ DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
+
+ /* offsets into the thread struct */
+ DEFINE(THREAD_D10, offsetof(struct thread_struct, d10));
+ DEFINE(THREAD_D11, offsetof(struct thread_struct, d11));
+ DEFINE(THREAD_D12, offsetof(struct thread_struct, d12));
+ DEFINE(THREAD_D13, offsetof(struct thread_struct, d13));
+ DEFINE(THREAD_A1, offsetof(struct thread_struct, a1));
+ DEFINE(THREAD_A2, offsetof(struct thread_struct, a2));
+ DEFINE(THREAD_A5, offsetof(struct thread_struct, a5));
+ DEFINE(THREAD_A6, offsetof(struct thread_struct, a6));
+ DEFINE(THREAD_SP, offsetof(struct thread_struct, sp));
+
+ /* offsets into the pt_regs */
+ DEFINE(PT_D0, offsetof(struct pt_regs, dn[0]));
+ DEFINE(PT_D1, offsetof(struct pt_regs, dn[1]));
+ DEFINE(PT_D2, offsetof(struct pt_regs, dn[2]));
+ DEFINE(PT_D3, offsetof(struct pt_regs, dn[3]));
+ DEFINE(PT_D4, offsetof(struct pt_regs, dn[4]));
+ DEFINE(PT_D5, offsetof(struct pt_regs, dn[5]));
+ DEFINE(PT_D6, offsetof(struct pt_regs, dn[6]));
+ DEFINE(PT_D7, offsetof(struct pt_regs, dn[7]));
+ DEFINE(PT_D8, offsetof(struct pt_regs, dn[8]));
+ DEFINE(PT_D9, offsetof(struct pt_regs, dn[9]));
+ DEFINE(PT_D10, offsetof(struct pt_regs, dn[10]));
+ DEFINE(PT_D11, offsetof(struct pt_regs, dn[11]));
+ DEFINE(PT_D12, offsetof(struct pt_regs, dn[12]));
+ DEFINE(PT_D13, offsetof(struct pt_regs, dn[13]));
+ DEFINE(PT_D14, offsetof(struct pt_regs, dn[14]));
+ DEFINE(PT_D15, offsetof(struct pt_regs, dn[15]));
+ DEFINE(PT_A0, offsetof(struct pt_regs, an[0]));
+ DEFINE(PT_A1, offsetof(struct pt_regs, an[1]));
+ DEFINE(PT_A2, offsetof(struct pt_regs, an[2]));
+ DEFINE(PT_A3, offsetof(struct pt_regs, an[3]));
+ DEFINE(PT_A4, offsetof(struct pt_regs, an[4]));
+ DEFINE(PT_A5, offsetof(struct pt_regs, an[5]));
+ DEFINE(PT_A6, offsetof(struct pt_regs, an[6]));
+ DEFINE(PT_A7, offsetof(struct pt_regs, an[7]));
+ DEFINE(PT_SP, offsetof(struct pt_regs, an[7]));
+
+ DEFINE(PT_ACC0HI, offsetof(struct pt_regs, acc0[0]));
+ DEFINE(PT_ACC0LO, offsetof(struct pt_regs, acc0[1]));
+ DEFINE(PT_MAC_RC16, offsetof(struct pt_regs, mac_rc16));
+
+ DEFINE(PT_ACC1HI, offsetof(struct pt_regs, acc1[0]));
+ DEFINE(PT_ACC1LO, offsetof(struct pt_regs, acc1[1]));
+
+ DEFINE(PT_SOURCE3, offsetof(struct pt_regs, source3));
+ DEFINE(PT_INST_CNT, offsetof(struct pt_regs, inst_cnt));
+ DEFINE(PT_CSR, offsetof(struct pt_regs, csr));
+ DEFINE(PT_DUMMY_UNUSED, offsetof(struct pt_regs, dummy_unused));
+
+ DEFINE(PT_INT_MASK0, offsetof(struct pt_regs, int_mask0));
+ DEFINE(PT_INT_MASK1, offsetof(struct pt_regs, int_mask1));
+
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+
+ DEFINE(PT_TRAP_CAUSE, offsetof(struct pt_regs, trap_cause));
+
+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
+
+ DEFINE(PT_FRAME_TYPE, offsetof(struct pt_regs, frame_type));
+
+ DEFINE(PT_ORIGINAL_D0, offsetof(struct pt_regs, original_dn_0));
+ DEFINE(PT_PREVIOUS_PC, offsetof(struct pt_regs, previous_pc));
+
+ /* offsets into the kernel_stat struct */
+ DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
+
+ /* signal defines */
+ DEFINE(SIGSEGV, SIGSEGV);
+ //DEFINE(SEGV_MAPERR, SEGV_MAPERR);
+ DEFINE(SIGTRAP, SIGTRAP);
+ //DEFINE(TRAP_TRACE, TRAP_TRACE);
+
+ DEFINE(PT_PTRACED, PT_PTRACED);
+ DEFINE(PT_DTRACE, PT_DTRACE);
+
+ DEFINE(ASM_THREAD_SIZE, THREAD_SIZE);
+
+ /* Offsets in thread_info structure */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(TI_INTR_NESTING, offsetof(struct thread_info, interrupt_nesting));
+ DEFINE(ASM_TIF_NEED_RESCHED, TIF_NEED_RESCHED);
+ DEFINE(ASM_TIF_SYSCALL_TRACE, TIF_SYSCALL_TRACE);
+ DEFINE(ASM_TIF_SIGPENDING, TIF_SIGPENDING);
+
+ DEFINE(ASM_RAM_END, (CONFIG_RAMBASE + CONFIG_RAMSIZE));
+ return 0;
+}
diff -ruN linux-2.6.28.10_o/arch/ubicom32/kernel/Makefile linux-2.6.28.10/arch/ubicom32/kernel/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/kernel/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/kernel/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,64 @@
+#
+# arch/ubicom32/kernel/Makefile
+# Main Makefile for the Ubicom32 arch directory.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y += \
+ devtree.o \
+ dma.o \
+ flat.o \
+ init_task.o \
+ irq.o \
+ ldsr.o \
+ os_node.o \
+ process.o \
+ processor.o \
+ ptrace.o \
+ setup.o \
+ signal.o \
+ stacktrace.o \
+ sys_ubicom32.o \
+ syscalltable.o \
+ thread.o \
+ time.o \
+ traps.o \
+ ubicom32_context_switch.o \
+ ubicom32_ksyms.o \
+ ubicom32_syscall.o \
+ unaligned_trap.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_COMEMPCI) += comempci.o
+obj-$(CONFIG_SMP) += smp.o topology.o
+obj-$(CONFIG_ACCESS_OK_CHECKS_ENABLED) += uaccess.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS) += timer_device.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer_broadcast.o
+
+ifndef CONFIG_GENERIC_CLOCKEVENTS
+obj-y += timer_tick.o
+endif
diff -ruN linux-2.6.28.10_o/arch/ubicom32/kernel/syscalltable.S linux-2.6.28.10/arch/ubicom32/kernel/syscalltable.S
--- linux-2.6.28.10_o/arch/ubicom32/kernel/syscalltable.S 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/kernel/syscalltable.S 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,377 @@
+/*
+ * arch/ubicom32/kernel/syscalltable.S
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ *
+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+.text
+ALIGN
+ .global sys_call_table
+sys_call_table:
+ .long sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long execve_intercept
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_chown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_ni_syscall /* _sys_swapon */
+ .long sys_reboot
+ .long sys_old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm for i386 */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall
+ .long sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* obsolete idle() syscall */
+ .long sys_ni_syscall /* vm86old for i386 */
+ .long sys_wait4
+ .long sys_ni_syscall /* 115 */ /* _sys_swapoff */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long clone_intercept /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_cacheflush /* modify_ldt for i386 */
+ .long sys_adjtimex
+ .long sys_ni_syscall /* 125 */ /* _sys_mprotect */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "creat_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_ni_syscall /* _sys_msync */
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_ni_syscall /* 150 */ /* _sys_mlock */
+ .long sys_ni_syscall /* _sys_munlock */
+ .long sys_ni_syscall /* _sys_mlockall */
+ .long sys_ni_syscall /* _sys_munlockall */
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_ni_syscall /* _sys_mremap */
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_getpagesize /* _sys_getpagesize */
+ .long sys_ni_syscall /* old "query_module" */
+ .long sys_poll
+ .long sys_ni_syscall /* _sys_nfsservctl */
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_lchown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long vfork_intercept /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_chown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_lchown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_getdents64 /* 220 */
+ .long sys_gettid
+ .long sys_tkill
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr /* 225 */
+ .long sys_getxattr
+ .long sys_lgetxattr
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr /* 230 */
+ .long sys_flistxattr
+ .long sys_removexattr
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_futex /* 235 */
+ .long sys_sendfile64
+ .long sys_ni_syscall /* _sys_mincore */
+ .long sys_ni_syscall /* _sys_madvise */
+ .long sys_fcntl64
+ .long sys_readahead /* 240 */
+ .long sys_io_setup
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel /* 245 */
+ .long sys_fadvise64
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 250 */
+ .long sys_epoll_wait
+ .long sys_ni_syscall /* _sys_remap_file_pages */
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 255 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 260 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 265 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_mbind
+ .long sys_get_mempolicy
+ .long sys_set_mempolicy /* 270 */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive
+ .long sys_mq_notify /* 275 */
+ .long sys_mq_getsetattr
+ .long sys_waitid
+ .long sys_ni_syscall /* for _sys_vserver */
+ .long sys_add_key
+ .long sys_request_key /* 280 */
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch /* 285 */
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat /* 290 */
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat /* 295 */
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat /* 300 */
+ .long sys_ni_syscall /* Reserved for pselect6 */
+ .long sys_ni_syscall /* Reserved for ppoll */
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list /* 305 */
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages /* 310 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_kexec_load
+ .long sys_getcpu
+ .long sys_epoll_pwait /* 315 */
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate /* 320 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+ .long sys_ni_syscall /* sys_signalfd4 */
+ .long sys_ni_syscall /* sys_eventfd2 */
+ .long sys_ni_syscall /* sys_epoll_create1 */
+ /* 325 */
+ .long sys_ni_syscall /* sys_dup3 */
+ .long sys_ni_syscall /* sys_pipe2 */
+ .long sys_ni_syscall /* sys_inotify_init1 */
+ .rept NR_syscalls-(.-sys_call_table)/4
+ .long sys_ni_syscall
+ .endr
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/lib/Makefile linux-2.6.28.10/arch/ubicom32/lib/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/lib/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/lib/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/lib/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+#
+# Makefile for m68knommu specific library files..
+#
+
+lib-y := checksum.o delay.o mem_ubicom32.o
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mach-common/Makefile linux-2.6.28.10/arch/ubicom32/mach-common/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/mach-common/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mach-common/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,40 @@
+#
+# arch/ubicom32/mach-common/Makefile
+# Makefile for Ubicom32 generic drivers/code.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-y += cachectl.o common.o usb_tio.o usb.o ubi32-gpio.o board.o bootargs.o
+obj-$(CONFIG_PCI) += pci.o io.o
+
+obj-$(CONFIG_FB_UBICOM32) += vdc_tio.o
+obj-$(CONFIG_UBICOM_HID) += ubicom32hid.o
+obj-$(CONFIG_UBICOM_INPUT) += ubicom32input.o
+obj-$(CONFIG_UBICOM_INPUT_I2C) += ubicom32input_i2c.o
+obj-$(CONFIG_UBICOM_SWITCH) += switch-core.o
+obj-$(CONFIG_UBICOM_SWITCH_BCM539X) += switch-bcm539x.o
+obj-$(CONFIG_UIO_UBICOM32RING) += ring_tio.o
+obj-$(CONFIG_SND_UBI32) += audio_tio.o
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mach-ip5k/Kconfig linux-2.6.28.10/arch/ubicom32/mach-ip5k/Kconfig
--- linux-2.6.28.10_o/arch/ubicom32/mach-ip5k/Kconfig 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mach-ip5k/Kconfig 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,32 @@
+
+config IP5170DPF
+ bool "IP5170DPF"
+ select UBICOM32_V3
+ select I2C
+ select I2C_GPIO
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ select UBICOM_HID
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ help
+ IP5170 Digital Picture Frame board, 8005-1113, IP5K-BEV-0011-13 v1.3
+
+config IP5160DEV
+ bool "IP5160Dev_Ver1Dot1"
+ select UBICOM32_V3
+ select BRD_64MB
+ help
+ Ubicom StreamEngine 5000 Development Board, IP5K-BDV-0004-11 v1.1
+
+config IP5160EVAL
+ bool "IP5160RGWEval_Ver2Rev2"
+ select UBICOM32_V3
+ select BRD_32MB
+ help
+ Ubicom StreamEngine 5000 RGW Evaluation Board, IP5K-RGW-0004-11 v2.2
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mach-ip5k/Makefile linux-2.6.28.10/arch/ubicom32/mach-ip5k/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/mach-ip5k/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mach-ip5k/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/mach-ip5k/Makefile
+# Makefile for boards which have an ip5k on them.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-$(CONFIG_IP5170DPF) += board-ip5170dpf.o
+obj-$(CONFIG_IP5160DEV) += board-ip5160dev.o
+obj-$(CONFIG_IP5160EVAL) += board-ip5160rgw.o
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mach-ip7k/Kconfig linux-2.6.28.10/arch/ubicom32/mach-ip7k/Kconfig
--- linux-2.6.28.10_o/arch/ubicom32/mach-ip7k/Kconfig 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mach-ip7k/Kconfig 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,132 @@
+config IP7145DPF
+ bool "IP7145DPF"
+ select UBICOM32_V4
+ select UBICOM_INPUT
+ select UBICOM_INPUT_I2C
+ select RTC_CLASS
+ select RTC_DRV_S35390A
+ select I2C
+ select I2C_GPIO
+ select GPIO_PCA953X
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select LCD_UBICOM32
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_UBICOM32
+ select SND_UBI32
+ select MMC_UBICOM32
+ select MMC
+ select MMC_BLOCK
+ select BRD_64MB
+ help
+ IP7145 Digital Picture Frame reference design, supports:
+ 8007-0410 v1.0
+
+config IP7160RGW
+ bool "IP7160RGW"
+ select UBICOM32_V4
+ select UBICOM_INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ select SPI
+ select SPI_UBICOM32_GPIO
+ select VLAN_8021Q
+ select UBICOM_SWITCH
+ select UBICOM_SWITCH_BCM539X
+ help
+ Ubicom IP7160 RGW Eval, supports:
+ 8007-0110 v1.0
+ 8007-0111 v1.1
+ 8007-0112 v1.2
+
+config IP7160BRINGUP
+ bool "IP7160BRINGUP"
+ select UBICOM32_V4
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ help
+ Ubicom IP7160 Bringup, supports:
+ 8007-0010 v1.0
+
+config IP7160DPF
+ bool "IP7160DPF"
+ select UBICOM32_V4
+ select I2C
+ select I2C_GPIO
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4350
+ select UBICOM_HID
+ select BRD_64MB
+ help
+ IP7160 Digital Picture Frame board, supports:
+ 8007-0211 Rev 1.1
+
+config IP7500MODULE
+ bool "IP7500MODULE"
+ select UBICOM32_V4
+ select BRD_128MB
+ help
+ Ubicom IP7500 CPU Module board, supports:
+ 8007-0510 v1.0
+ 8007-0510A v1.0
+
+ Please see ip7500module.c for more details.
+
+config IP7500AV
+ bool "IP7500AV"
+ select UBICOM32_V4
+ select BRD_128MB
+ select I2C
+ select I2C_GPIO
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4384
+ select FB
+ select FB_UBICOM32
+ help
+ Ubicom IP7500 Audio Video board, supports:
+ 8007-0810 v1.0
+
+ With Ubicom IP7500 CPU Module board:
+ 8007-0510 v1.0 -or-
+ 8007-0510A v1.0
+
+ Please see ip7500av.c for more details.
+
+config IP7500MEDIA
+ bool "IP7500MEDIA"
+ select UBICOM32_V4
+ select UBICOM_INPUT_I2C
+ select RTC_CLASS
+ select RTC_DRV_S35390A
+ select I2C
+ select I2C_GPIO
+ select GPIO_PCA953X
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select LCD_UBICOM32
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_UBICOM32
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4350
+ select MMC_UBICOM32
+ select MMC
+ select MMC_BLOCK
+ select BRD_128MB
+ help
+ IP7500 Media Board w/ IP7500 CPU Module board, supports:
+ 8007-0610 v1.0 w/ 8007-0510 v1.0
+
+ Please see ip7500media.c for more details.
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mach-ip7k/Makefile linux-2.6.28.10/arch/ubicom32/mach-ip7k/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/mach-ip7k/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mach-ip7k/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,35 @@
+#
+# arch/ubicom32/mach-ip7k/Makefile
+# Makefile for ip7k based boards.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-$(CONFIG_IP7145DPF) += board-ip7145dpf.o
+obj-$(CONFIG_IP7160RGW) += board-ip7160rgw.o
+obj-$(CONFIG_IP7160BRINGUP) += board-ip7160bringup.o
+obj-$(CONFIG_IP7160DPF) += board-ip7160dpf.o
+obj-$(CONFIG_IP7500MODULE) += board-ip7500module.o
+obj-$(CONFIG_IP7500MEDIA) += board-ip7500media.o
+obj-$(CONFIG_IP7500AV) += board-ip7500av.o
diff -ruN linux-2.6.28.10_o/arch/ubicom32/Makefile linux-2.6.28.10/arch/ubicom32/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/Makefile 2009-08-06 10:31:02.000000000 +0300
@@ -0,0 +1,105 @@
+#
+# arch/ubicom32/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+KBUILD_DEFCONFIG :=
+
+# setup the machine name and machine dependent settings
+machine-$(CONFIG_UBICOM32_V3) := ip5k
+machine-$(CONFIG_UBICOM32_V4) := ip7k
+MACHINE := $(machine-y)
+export MACHINE
+
+model-$(CONFIG_RAMKERNEL) := ram
+model-$(CONFIG_ROMKERNEL) := rom
+MODEL := $(model-y)
+export MODEL
+
+CPUCLASS := $(cpuclass-y)
+
+export CPUCLASS
+
+#
+# We want the core kernel built using the fastcall ABI but modules need
+# to be built using the slower calling convention because they could be
+# loaded out of range for fast calls.
+#
+CFLAGS_KERNEL += -mfastcall
+CFLAGS_MODULE += -mno-fastcall
+
+#
+# Some CFLAG additions based on specific CPU type.
+#
+cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
+cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
+
+ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
+LDFLAGS_vmlinux := $(ldflags-y)
+
+GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
+GCC_LIBS := $(GCCLIBDIR)/libgcc.a
+
+KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
+KBUILD_AFLAGS += $(cflags-y)
+
+KBUILD_CFLAGS += -D__linux__ -Dlinux
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+
+# include any machine specific directory
+ifneq ($(machine-y),)
+core-y += arch/$(ARCH)/mach-$(MACHINE)/
+endif
+
+head-y := arch/$(ARCH)/kernel/head.o
+
+core-y += arch/$(ARCH)/kernel/ \
+ arch/$(ARCH)/mm/ \
+ arch/$(ARCH)/crypto/ \
+ arch/$(ARCH)/mach-common/
+
+drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
+
+libs-y += arch/$(ARCH)/lib/
+libs-y += $(GCC_LIBS)
+
+archclean:
+
+# make sure developer has selected a valid board
+ifeq ($(CONFIG_NOBOARD),y)
+# $(error have to select a valid board file $(CONFIG_NOBOARD), please run kernel config again)
+_all: config_board_error
+endif
+
+config_board_error:
+ @echo "*************************************************"
+ @echo "You have not selected a proper board."
+ @echo "Please run menuconfig (or config) against your"
+ @echo "kernel and choose your board under Processor"
+ @echo "options"
+ @echo "*************************************************"
+ @exit 1
+
diff -ruN linux-2.6.28.10_o/arch/ubicom32/mm/Makefile linux-2.6.28.10/arch/ubicom32/mm/Makefile
--- linux-2.6.28.10_o/arch/ubicom32/mm/Makefile 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.28.10/arch/ubicom32/mm/Makefile 2009-08-12 13:08:37.000000000 +0300
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/mm/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+#
+# Makefile for the linux m68knommu specific parts of the memory manager.
+#
+
+obj-y += init.o fault.o memory.o kmap.o ocm-alloc.o
diff -ruN linux-2.6.28.10_o/include/linux/elf-em.h linux-2.6.28.10/include/linux/elf-em.h
--- linux-2.6.28.10_o/include/linux/elf-em.h 2009-05-02 21:54:43.000000000 +0300
+++ linux-2.6.28.10/include/linux/elf-em.h 2009-08-06 10:31:10.000000000 +0300
@@ -41,6 +41,7 @@
* up with a final number.
*/
#define EM_ALPHA 0x9026
+#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
/* Bogus old v850 magic number, used by old tools. */
#define EM_CYGNUS_V850 0x9080
diff -ruN linux-2.6.28.10_o/lib/Kconfig.debug linux-2.6.28.10/lib/Kconfig.debug
--- linux-2.6.28.10_o/lib/Kconfig.debug 2009-05-02 21:54:43.000000000 +0300
+++ linux-2.6.28.10/lib/Kconfig.debug 2009-08-06 10:31:11.000000000 +0300
@@ -549,7 +549,7 @@
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
(X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
- AVR32 || SUPERH || BLACKFIN || MN10300)
+ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
diff -ruN linux-2.6.28.10_o/scripts/mod/file2alias.c linux-2.6.28.10/scripts/mod/file2alias.c
--- linux-2.6.28.10_o/scripts/mod/file2alias.c 2009-05-02 21:54:43.000000000 +0300
+++ linux-2.6.28.10/scripts/mod/file2alias.c 2009-08-06 10:31:12.000000000 +0300
@@ -753,6 +753,15 @@
+ sym->st_value;
}
+ /*
+ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
+ * and 0 size will break do_table since it adjust size to (size - id_size)
+ * this is to make sure st_size fall in range.
+ */
+ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
+ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
+ }
+
if (sym_is(symname, "__mod_pci_device_table"))
do_table(symval, sym->st_size,
sizeof(struct pci_device_id), "pci",