openwrt/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch

From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sun, 21 Sep 2008 04:47:13 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add PCI support.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
 arch/mips/bcm63xx/Kconfig                       |    2 +
 arch/mips/bcm63xx/setup.c                       |    2 +
 arch/mips/pci/Makefile                          |    2 +
 arch/mips/pci/fixup-bcm63xx.c                   |   21 +++
 arch/mips/pci/ops-bcm63xx.c                     |  179 +++++++++++++++++++++++
 arch/mips/pci/pci-bcm63xx.c                     |  178 ++++++++++++++++++++++
 arch/mips/pci/pci-bcm63xx.h                     |   27 ++++
 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h |    6 +
 8 files changed, 417 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/pci/fixup-bcm63xx.c
 create mode 100644 arch/mips/pci/ops-bcm63xx.c
 create mode 100644 arch/mips/pci/pci-bcm63xx.c
 create mode 100644 arch/mips/pci/pci-bcm63xx.h
 create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h

diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index e6d2699..7ca370a 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -3,7 +3,9 @@ menu "CPU support"
 
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"
+	select HW_HAS_PCI
 
 config BCM63XX_CPU_6358
 	bool "support 6358 CPU"
+	select HW_HAS_PCI
 endmenu
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 55c51a9..4d8b127 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -105,4 +105,6 @@ void __init plat_mem_setup(void)
 	pm_power_off = bcm63xx_machine_halt;
 
 	set_io_port_base(0);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
 }
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c8c32f4..0b688a8 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
+					ops-bcm63xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
new file mode 100644
index 0000000..3408630
--- /dev/null
+++ b/arch/mips/pci/fixup-bcm63xx.c
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <bcm63xx_cpu.h>
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return bcm63xx_get_irq_number(IRQ_PCI);
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
new file mode 100644
index 0000000..f8dce9d
--- /dev/null
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * swizzle 32bits data to return only the needed part
+ */
+static int postprocess_read(u32 data, int where, unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		ret = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		ret = data;
+		break;
+	}
+	return ret;
+}
+
+static int preprocess_write(u32 orig_data, u32 val, int where,
+			    unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 2:
+		ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 4:
+		ret = val;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * setup hardware for a configuration cycle with given parameters
+ */
+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
+				    unsigned int devfn, int where)
+{
+	unsigned int slot, func, reg;
+	u32 val;
+
+	slot = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+	reg = where >> 2;
+
+	/* sanity check */
+	if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
+		return 1;
+
+	if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
+		return 1;
+
+	if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
+		return 1;
+
+	/* ok, setup config access */
+	val = (reg << MPI_L2PCFG_REG_SHIFT);
+	val |= (func << MPI_L2PCFG_FUNC_SHIFT);
+	val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
+	val |= MPI_L2PCFG_CFG_USEREG_MASK;
+	val |= MPI_L2PCFG_CFG_SEL_MASK;
+	/* type 0 cycle for local bus, type 1 cycle for anything else */
+	if (type != 0) {
+		/* FIXME: how to specify bus ??? */
+		val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
+	}
+	bcm_mpi_writel(val, MPI_L2PCFG_REG);
+
+	return 0;
+}
+
+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
+				unsigned int devfn, int where, int size,
+				u32 *val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then read data at
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	*val = postprocess_read(data, where, size);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
+				 unsigned int devfn, int where, int size,
+				 u32 val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then write data to
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	data = preprocess_write(data, val, where, size);
+
+	__raw_writel(cpu_to_le32(data), pci_iospace_start);
+	wmb();
+	/* no way to know the access is done, we have to wait */
+	udelay(500);
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 *val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_read(type, bus->number, devfn,
+				    where, size, val);
+}
+
+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_write(type, bus->number, devfn,
+				     where, size, val);
+}
+
+struct pci_ops bcm63xx_pci_ops = {
+	.read   = bcm63xx_pci_read,
+	.write  = bcm63xx_pci_write
+};
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
new file mode 100644
index 0000000..52bac8e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,178 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+#include "pci-bcm63xx.h"
+
+/* allow PCI to be disabled at runtime depending on board nvram
+ * configuration */
+int bcm63xx_pci_enabled = 0;
+
+static struct resource bcm_pci_mem_resource = {
+	.name   = "bcm63xx PCI memory space",
+	.start  = BCM_PCI_MEM_BASE_PA,
+	.end    = BCM_PCI_MEM_END_PA,
+	.flags  = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+	.name   = "bcm63xx PCI IO space",
+	.start  = BCM_PCI_IO_BASE_PA,
+	.end    = BCM_PCI_IO_END_PA,
+	.flags  = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+	.pci_ops	= &bcm63xx_pci_ops,
+	.io_resource	= &bcm_pci_io_resource,
+	.mem_resource	= &bcm_pci_mem_resource,
+};
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	iob();
+	return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |=  MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static int __init bcm63xx_pci_init(void)
+{
+	unsigned int mem_size;
+	u32 val;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return -ENODEV;
+
+	if (!bcm63xx_pci_enabled)
+		return -ENODEV;
+
+	/*
+	 * configuration  access are  done through  IO space,  remap 4
+	 * first bytes to access it from CPU.
+	 *
+	 * this means that  no io access from CPU  should happen while
+	 * we do a configuration cycle,  but there's no way we can add
+	 * a spinlock for each io access, so this is currently kind of
+	 * broken on SMP.
+	 */
+	pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
+	if (!pci_iospace_start)
+		return -ENOMEM;
+
+	/* setup local bus to PCI access (PCI memory) */
+	val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+	bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+	/* set Cardbus IDSEL (type 0 cfg access on primary bus for
+	 * this IDSEL will be done on Cardbus instead) */
+	val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+	val &= ~PCMCIA_C1_CBIDSEL_MASK;
+	val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+	bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+	/* disable second access windows */
+	bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+
+	/* setup local bus  to PCI access (IO memory),  we have only 1
+	 * IO window  for both PCI  and cardbus, but it  cannot handle
+	 * both  at the  same time,  assume standard  PCI for  now, if
+	 * cardbus card has  IO zone, PCI fixup will  change window to
+	 * cardbus */
+	val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+	bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+	/* enable PCI related GPIO pins */
+	bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+	/* setup PCI to local bus access, used by PCI device to target
+	 * local RAM while bus mastering */
+	bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+	if (BCMCPU_IS_6358())
+		val = MPI_SP0_REMAP_ENABLE_MASK;
+	else
+		val = 0;
+	bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+	bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+	bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+	mem_size = bcm63xx_get_memory_size();
+
+	/* 6348 before rev b0 exposes only 16 MB of RAM memory through
+	 * PCI, throw a warning if we have more memory */
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+		if (mem_size > (16 * 1024 * 1024))
+			printk(KERN_WARNING "bcm63xx: this CPU "
+			       "revision cannot handle more than 16MB "
+			       "of RAM for PCI bus mastering\n");
+	} else {
+		/* setup sp0 range to local RAM size */
+		bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+		bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+	}
+
+	/* change  host bridge  retry  counter to  infinite number  of
+	 * retry,  needed for  some broadcom  wifi cards  with Silicon
+	 * Backplane bus where access to srom seems very slow  */
+	val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+	val &= ~REG_TIMER_RETRY_MASK;
+	bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+	/* enable memory decoder and bus mastering */
+	val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+	val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+	/* enable read prefetching & disable byte swapping for bus
+	 * mastering transfers */
+	val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+	val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+	val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+	bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+	/* enable pci interrupt */
+	val = bcm_mpi_readl(MPI_LOCINT_REG);
+	val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+	bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+	register_pci_controller(&bcm63xx_controller);
+
+	/* mark memory space used for IO mapping as reserved */
+	request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+			   "bcm63xx PCI IO space");
+	return 0;
+}
+
+arch_initcall(bcm63xx_pci_init);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
new file mode 100644
index 0000000..a6e594e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -0,0 +1,27 @@
+#ifndef PCI_BCM63XX_H_
+#define PCI_BCM63XX_H_
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_pci.h>
+
+/*
+ * Cardbus shares  the PCI bus, but has  no IDSEL, so a  special id is
+ * reserved for it.  If you have a standard PCI device at this id, you
+ * need to change the following definition.
+ */
+#define CARDBUS_PCI_IDSEL	0x8
+
+/*
+ * defined in ops-bcm63xx.c
+ */
+extern struct pci_ops bcm63xx_pci_ops;
+extern struct pci_ops bcm63xx_cb_ops;
+
+/*
+ * defined in pci-bcm63xx.c
+ */
+extern void __iomem *pci_iospace_start;
+
+#endif /* ! PCI_BCM63XX_H_ */
diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
new file mode 100644
index 0000000..c549344
--- /dev/null
+++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_PCI_H_
+#define BCM63XX_DEV_PCI_H_
+
+extern int bcm63xx_pci_enabled;
+
+#endif /* BCM63XX_DEV_PCI_H_ */
-- 
1.5.4.3