hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to...

48 lines
1.2 KiB
Diff
Raw Normal View History

kernel: Copy patches from kernel 4.14 to 4.19 This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 16:57:55 +00:00
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
kernel: Make the patches apply on top of 4.19 This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:01:44 +00:00
@@ -329,6 +329,14 @@ static int at803x_config_init(struct phy
kernel: Copy patches from kernel 4.14 to 4.19 This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 16:57:55 +00:00
AT803X_DEBUG_TX_CLK_DLY_EN, 0);
}
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-disable-smarteee")) {
+ at803x_disable_smarteee(phydev);
+ }
+#endif
+
return 0;
}
kernel: Make the patches apply on top of 4.19 This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:01:44 +00:00
@@ -367,6 +375,7 @@ static void at803x_link_change_notify(st
kernel: Copy patches from kernel 4.14 to 4.19 This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 16:57:55 +00:00
{
struct at803x_priv *priv = phydev->priv;
struct at803x_platform_data *pdata;
+ u8 fixup_rgmii_tx_delay = 0;
pdata = dev_get_platdata(&phydev->mdio.dev);
/*
kernel: Make the patches apply on top of 4.19 This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:01:44 +00:00
@@ -396,8 +405,19 @@ static void at803x_link_change_notify(st
kernel: Copy patches from kernel 4.14 to 4.19 This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 16:57:55 +00:00
} else {
priv->phy_reset = false;
}
- if (pdata && pdata->fixup_rgmii_tx_delay &&
- phydev->speed != priv->prev_speed) {
+
+ if (pdata && pdata->fixup_rgmii_tx_delay)
+ fixup_rgmii_tx_delay = 1;
+
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-fixup-rgmii-tx-delay")) {
+ fixup_rgmii_tx_delay = 1;
+ }
+#endif
+
+ if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
switch (phydev->speed) {
case SPEED_10:
case SPEED_100: