openwrt/target/linux/layerscape/patches-4.14/806-rtc-support-layerscape....

777 lines
21 KiB
Diff
Raw Normal View History

From f8d89482075e2a4a62fc5cbacf6bea6baf4dc65f Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Tue, 30 Oct 2018 18:27:31 +0800
Subject: [PATCH 23/40] rtc: support layerscape
This is an integrated patch of rtc for layerscape
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../devicetree/bindings/rtc/nxp,pcf85263.txt | 42 ++
drivers/rtc/Kconfig | 8 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-pcf85263.c | 664 ++++++++++++++++++
include/dt-bindings/rtc/nxp,pcf85263.h | 14 +
5 files changed, 729 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85263.txt
create mode 100644 drivers/rtc/rtc-pcf85263.c
create mode 100644 include/dt-bindings/rtc/nxp,pcf85263.h
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85263.txt
@@ -0,0 +1,42 @@
+NXP PCF85263 I2C Real Time Clock
+
+Required properties:
+- compatible: must be: "nxp,rtc-pcf85263"
+- reg: must be the I2C address
+
+Optional properties:
+- interrupt-names: Which interrupt signal is used must be "INTA" or "INTB"
+ Defaults to "INTA"
+
+- quartz-load-capacitance: The internal capacitor to select for the quartz:
+ PCF85263_QUARTZCAP_7pF [0]
+ PCF85263_QUARTZCAP_6pF [1]
+ PCF85263_QUARTZCAP_12p5pF [2] DEFAULT
+
+- quartz-drive-strength: Drive strength for the quartz:
+ PCF85263_QUARTZDRIVE_NORMAL [0] DEFAULT
+ PCF85263_QUARTZDRIVE_LOW [1]
+ PCF85263_QUARTZDRIVE_HIGH [2]
+
+- quartz-low-jitter: Boolean property, if present enables low jitter mode
+which
+ reduces jitter at the cost of increased power consumption.
+
+- wakeup-source: mark the chip as a wakeup source, independently of
+ the availability of an IRQ line connected to the SoC.
+ This is useful if the IRQ line is connected to a PMIC or other circuit
+ that can power up the device rather than to a normal SOC interrupt.
+
+Example:
+
+rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INTB";
+
+ quartz-load-capacitance = <PCF85263_QUARTZCAP_12p5pF>;
+ quartz-drive-strength = <PCF85263_QUARTZDRIVE_LOW>;
+};
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -433,6 +433,14 @@ config RTC_DRV_PCF85063
This driver can also be built as a module. If so, the module
will be called rtc-pcf85063.
+config RTC_DRV_PCF85263
+ tristate "NXP PCF85263"
+ help
+ If you say yes here you get support for the PCF85263 RTC chip
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf85263.
+
config RTC_DRV_PCF8563
tristate "Philips PCF8563/Epson RTC8564"
help
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_PCF2127) += rtc-pcf
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
obj-$(CONFIG_RTC_DRV_PCF85063) += rtc-pcf85063.o
obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o
+obj-$(CONFIG_RTC_DRV_PCF85263) += rtc-pcf85263.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PIC32) += rtc-pic32.o
--- /dev/null
+++ b/drivers/rtc/rtc-pcf85263.c
@@ -0,0 +1,664 @@
+/*
+ * rtc-pcf85263 Driver for the NXP PCF85263 RTC
+ * Copyright 2016 Parkeon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+
+#define DRV_NAME "rtc-pcf85263"
+
+/* Quartz capacitance */
+#define PCF85263_QUARTZCAP_7pF 0
+#define PCF85263_QUARTZCAP_6pF 1
+#define PCF85263_QUARTZCAP_12p5pF 2
+
+/* Quartz drive strength */
+#define PCF85263_QUARTZDRIVE_NORMAL 0
+#define PCF85263_QUARTZDRIVE_LOW 1
+#define PCF85263_QUARTZDRIVE_HIGH 2
+
+
+#define PCF85263_REG_RTC_SC 0x01 /* Seconds */
+#define PCF85263_REG_RTC_SC_OS BIT(7) /* Oscilator stopped flag */
+
+#define PCF85263_REG_RTC_MN 0x02 /* Minutes */
+#define PCF85263_REG_RTC_HR 0x03 /* Hours */
+#define PCF85263_REG_RTC_DT 0x04 /* Day of month 1-31 */
+#define PCF85263_REG_RTC_DW 0x05 /* Day of week 0-6 */
+#define PCF85263_REG_RTC_MO 0x06 /* Month 1-12 */
+#define PCF85263_REG_RTC_YR 0x07 /* Year 0-99 */
+
+#define PCF85263_REG_ALM1_SC 0x08 /* Seconds */
+#define PCF85263_REG_ALM1_MN 0x09 /* Minutes */
+#define PCF85263_REG_ALM1_HR 0x0a /* Hours */
+#define PCF85263_REG_ALM1_DT 0x0b /* Day of month 1-31 */
+#define PCF85263_REG_ALM1_MO 0x0c /* Month 1-12 */
+
+#define PCF85263_REG_ALM_CTL 0x10
+#define PCF85263_REG_ALM_CTL_ALL_A1E 0x1f /* sec,min,hr,day,mon alarm 1 */
+
+#define PCF85263_REG_OSC 0x25
+#define PCF85263_REG_OSC_CL_MASK (BIT(0) | BIT(1))
+#define PCF85263_REG_OSC_CL_SHIFT 0
+#define PCF85263_REG_OSC_OSCD_MASK (BIT(2) | BIT(3))
+#define PCF85263_REG_OSC_OSCD_SHIFT 2
+#define PCF85263_REG_OSC_LOWJ BIT(4)
+#define PCF85263_REG_OSC_12H BIT(5)
+
+#define PCF85263_REG_PINIO 0x27
+#define PCF85263_REG_PINIO_INTAPM_MASK (BIT(0) | BIT(1))
+#define PCF85263_REG_PINIO_INTAPM_SHIFT 0
+#define PCF85263_INTAPM_INTA (0x2 << PCF85263_REG_PINIO_INTAPM_SHIFT)
+#define PCF85263_INTAPM_HIGHZ (0x3 << PCF85263_REG_PINIO_INTAPM_SHIFT)
+#define PCF85263_REG_PINIO_TSPM_MASK (BIT(2) | BIT(3))
+#define PCF85263_REG_PINIO_TSPM_SHIFT 2
+#define PCF85263_TSPM_DISABLED (0x0 << PCF85263_REG_PINIO_TSPM_SHIFT)
+#define PCF85263_TSPM_INTB (0x1 << PCF85263_REG_PINIO_TSPM_SHIFT)
+#define PCF85263_REG_PINIO_CLKDISABLE BIT(7)
+
+#define PCF85263_REG_FUNCTION 0x28
+#define PCF85263_REG_FUNCTION_COF_MASK 0x7
+#define PCF85263_REG_FUNCTION_COF_OFF 0x7 /* No clock output */
+
+#define PCF85263_REG_INTA_CTL 0x29
+#define PCF85263_REG_INTB_CTL 0x2A
+#define PCF85263_REG_INTx_CTL_A1E BIT(4) /* Alarm 1 */
+#define PCF85263_REG_INTx_CTL_ILP BIT(7) /* 0=pulse, 1=level */
+
+#define PCF85263_REG_FLAGS 0x2B
+#define PCF85263_REG_FLAGS_A1F BIT(5)
+
+#define PCF85263_REG_RAM_BYTE 0x2c
+
+#define PCF85263_REG_STOPENABLE 0x2e
+#define PCF85263_REG_STOPENABLE_STOP BIT(0)
+
+#define PCF85263_REG_RESET 0x2f /* Reset command */
+#define PCF85263_REG_RESET_CMD_CPR 0xa4 /* Clear prescaler */
+
+#define PCF85263_MAX_REG 0x2f
+
+#define PCF85263_HR_PM BIT(5)
+
+enum pcf85263_irqpin {
+ PCF85263_IRQPIN_NONE,
+ PCF85263_IRQPIN_INTA,
+ PCF85263_IRQPIN_INTB
+};
+
+static const char *const pcf85263_irqpin_names[] = {
+ [PCF85263_IRQPIN_NONE] = "None",
+ [PCF85263_IRQPIN_INTA] = "INTA",
+ [PCF85263_IRQPIN_INTB] = "INTB"
+};
+
+struct pcf85263 {
+ struct device *dev;
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+ enum pcf85263_irqpin irq_pin;
+ int irq;
+ bool mode_12h;
+};
+
+/*
+ * Helpers to convert 12h to 24h and vice versa.
+ * Values in register are stored in BCD with a PM flag in bit 5
+ *
+ * 23:00 <=> 11PM <=> 0x31
+ * 00:00 <=> 12AM <=> 0x12
+ * 01:00 <=> 1AM <=> 0x01
+ * 12:00 <=> 12PM <=> 0x32
+ * 13:00 <=> 1PM <=> 0x21
+ */
+static int pcf85263_bcd12h_to_bin24h(int regval)
+{
+ int hr = bcd2bin(regval & 0x1f);
+ bool pm = regval & PCF85263_HR_PM;
+
+ if (hr == 12)
+ return pm ? 12 : 0;
+
+ return pm ? hr + 12 : hr;
+}
+
+static int pcf85263_bin24h_to_bcd12h(int hr24)
+{
+ bool pm = hr24 >= 12;
+ int hr12 = hr24 % 12;
+
+ if (!hr12)
+ hr12++;
+
+ return bin2bcd(hr12) | pm ? 0 : PCF85263_HR_PM;
+}
+
+static int pcf85263_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ const int first = PCF85263_REG_RTC_SC;
+ const int last = PCF85263_REG_RTC_YR;
+ const int len = last - first + 1;
+ u8 regs[len];
+ u8 hr_reg;
+ int ret;
+
+ ret = regmap_bulk_read(pcf85263->regmap, first, regs, len);
+ if (ret)
+ return ret;
+
+ if (regs[PCF85263_REG_RTC_SC - first] & PCF85263_REG_RTC_SC_OS) {
+ dev_warn(dev, "Oscillator stop detected, date/time is not reliable.\n");
+ return -EINVAL;
+ }
+
+ tm->tm_sec = bcd2bin(regs[PCF85263_REG_RTC_SC - first] & 0x7f);
+ tm->tm_min = bcd2bin(regs[PCF85263_REG_RTC_MN - first] & 0x7f);
+
+ hr_reg = regs[PCF85263_REG_RTC_HR - first];
+ if (pcf85263->mode_12h)
+ tm->tm_hour = pcf85263_bcd12h_to_bin24h(hr_reg);
+ else
+ tm->tm_hour = bcd2bin(hr_reg & 0x3f);
+
+ tm->tm_mday = bcd2bin(regs[PCF85263_REG_RTC_DT - first]);
+ tm->tm_wday = bcd2bin(regs[PCF85263_REG_RTC_DW - first]);
+ tm->tm_mon = bcd2bin(regs[PCF85263_REG_RTC_MO - first]) - 1;
+ tm->tm_year = bcd2bin(regs[PCF85263_REG_RTC_YR - first]);
+
+ tm->tm_year += 100; /* Assume 21st century */
+
+ return 0;
+}
+
+static int pcf85263_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+
+ /*
+ * Before setting time need to stop RTC and disable prescaler
+ * Do this all in a single I2C transaction exploiting wraparound
+ * as described in data sheet.
+ * This means that the array below must be in register order
+ */
+ u8 regs[] = {
+ PCF85263_REG_STOPENABLE_STOP, /* STOP */
+ PCF85263_REG_RESET_CMD_CPR, /* Disable prescaler */
+ /* Wrap around to register 0 (1/100s) */
+ 0, /* 1/100s always zero. */
+ bin2bcd(tm->tm_sec),
+ bin2bcd(tm->tm_min),
+ bin2bcd(tm->tm_hour), /* 24-hour */
+ bin2bcd(tm->tm_mday),
+ bin2bcd(tm->tm_wday + 1),
+ bin2bcd(tm->tm_mon + 1),
+ bin2bcd(tm->tm_year % 100)
+ };
+ int ret;
+
+ ret = regmap_bulk_write(pcf85263->regmap, PCF85263_REG_STOPENABLE,
+ regs, sizeof(regs));
+ if (ret)
+ return ret;
+
+ /* As we have set the time in 24H update the hardware for that */
+ if (pcf85263->mode_12h) {
+ pcf85263->mode_12h = false;
+ ret = regmap_update_bits(pcf85263->regmap, PCF85263_REG_OSC,
+ PCF85263_REG_OSC_12H, 0);
+ if (ret)
+ return ret;
+ }
+
+ /* Start it again */
+ return regmap_write(pcf85263->regmap, PCF85263_REG_STOPENABLE, 0);
+}
+
+static int pcf85263_enable_alarm(struct pcf85263 *pcf85263, bool enable)
+{
+ int reg;
+ int ret;
+
+ ret = regmap_update_bits(pcf85263->regmap, PCF85263_REG_ALM_CTL,
+ PCF85263_REG_ALM_CTL_ALL_A1E,
+ enable ? PCF85263_REG_ALM_CTL_ALL_A1E : 0);
+ if (ret)
+ return ret;
+
+ switch (pcf85263->irq_pin) {
+ case PCF85263_IRQPIN_NONE:
+ return 0;
+
+ case PCF85263_IRQPIN_INTA:
+ reg = PCF85263_REG_INTA_CTL;
+ break;
+
+ case PCF85263_IRQPIN_INTB:
+ reg = PCF85263_REG_INTB_CTL;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(pcf85263->regmap, reg,
+ PCF85263_REG_INTx_CTL_A1E,
+ enable ? PCF85263_REG_INTx_CTL_A1E : 0);
+}
+
+static int pcf85263_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alarm->time;
+ const int first = PCF85263_REG_ALM1_SC;
+ const int last = PCF85263_REG_ALM1_MO;
+ const int len = last - first + 1;
+ u8 regs[len];
+ u8 hr_reg;
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_bulk_read(pcf85263->regmap, first, regs, len);
+ if (ret)
+ return ret;
+
+ tm->tm_sec = bcd2bin(regs[PCF85263_REG_ALM1_SC - first] & 0x7f);
+ tm->tm_min = bcd2bin(regs[PCF85263_REG_ALM1_MN - first] & 0x7f);
+
+ hr_reg = regs[PCF85263_REG_ALM1_HR - first];
+ if (pcf85263->mode_12h)
+ tm->tm_hour = pcf85263_bcd12h_to_bin24h(hr_reg);
+ else
+ tm->tm_hour = bcd2bin(hr_reg & 0x3f);
+
+ tm->tm_mday = bcd2bin(regs[PCF85263_REG_ALM1_DT - first]);
+ tm->tm_mon = bcd2bin(regs[PCF85263_REG_ALM1_MO - first]) - 1;
+ tm->tm_year = -1;
+ tm->tm_wday = -1;
+
+ ret = regmap_read(pcf85263->regmap, PCF85263_REG_ALM_CTL, &regval);
+ if (ret)
+ return ret;
+ alarm->enabled = !!(regval & PCF85263_REG_ALM_CTL_ALL_A1E);
+
+ ret = regmap_read(pcf85263->regmap, PCF85263_REG_FLAGS, &regval);
+ if (ret)
+ return ret;
+ alarm->pending = !!(regval & PCF85263_REG_FLAGS_A1F);
+
+ return 0;
+}
+
+static int pcf85263_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alarm->time;
+ const int first = PCF85263_REG_ALM1_SC;
+ const int last = PCF85263_REG_ALM1_MO;
+ const int len = last - first + 1;
+ u8 regs[len];
+ int ret;
+
+ /* Disable alarm comparison during update */
+ ret = pcf85263_enable_alarm(pcf85263, false);
+ if (ret)
+ return ret;
+
+ /* Clear any pending alarm (write 0=>clr, 1=>no change) */
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_FLAGS,
+ (unsigned int)(~PCF85263_REG_FLAGS_A1F));
+ if (ret)
+ return ret;
+
+ /* Set the alarm time registers */
+ regs[PCF85263_REG_ALM1_SC - first] = bin2bcd(tm->tm_sec);
+ regs[PCF85263_REG_ALM1_MN - first] = bin2bcd(tm->tm_min);
+ regs[PCF85263_REG_ALM1_HR - first] = pcf85263->mode_12h ?
+ pcf85263_bin24h_to_bcd12h(tm->tm_hour) :
+ bin2bcd(tm->tm_hour);
+ regs[PCF85263_REG_ALM1_DT - first] = bin2bcd(tm->tm_mday);
+ regs[PCF85263_REG_ALM1_MO - first] = bin2bcd(tm->tm_mon + 1);
+
+ ret = regmap_bulk_write(pcf85263->regmap, first, regs, sizeof(regs));
+ if (ret)
+ return ret;
+
+ if (alarm->enabled)
+ ret = pcf85263_enable_alarm(pcf85263, true);
+
+ return ret;
+}
+
+static int pcf85263_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+
+ return pcf85263_enable_alarm(pcf85263, !!enable);
+}
+
+static irqreturn_t pcf85263_irq(int irq, void *data)
+{
+ struct pcf85263 *pcf85263 = data;
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(pcf85263->regmap, PCF85263_REG_FLAGS, &regval);
+ if (ret)
+ return IRQ_NONE;
+
+ if (regval & PCF85263_REG_FLAGS_A1F) {
+ regmap_write(pcf85263->regmap, PCF85263_REG_FLAGS,
+ (unsigned int)(~PCF85263_REG_FLAGS_A1F));
+
+ rtc_update_irq(pcf85263->rtc, 1, RTC_IRQF | RTC_AF);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int pcf85263_check_osc_stopped(struct pcf85263 *pcf85263)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(pcf85263->regmap, PCF85263_REG_RTC_SC, &regval);
+ if (ret)
+ return ret;
+
+ ret = regval & PCF85263_REG_RTC_SC_OS ? 1 : 0;
+ if (ret)
+ dev_warn(pcf85263->dev, "Oscillator stop detected, date/time is not reliable.\n");
+
+ return ret;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int pcf85263_ioctl(struct device *dev,
+ unsigned int cmd, unsigned long arg)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ int ret;
+
+ switch (cmd) {
+ case RTC_VL_READ:
+ ret = pcf85263_check_osc_stopped(pcf85263);
+ if (ret < 0)
+ return ret;
+
+ if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
+ return -EFAULT;
+ return 0;
+
+ case RTC_VL_CLR:
+ return regmap_update_bits(pcf85263->regmap,
+ PCF85263_REG_RTC_SC,
+ PCF85263_REG_RTC_SC_OS, 0);
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+#else
+#define pcf85263_ioctl NULL
+#endif
+
+static int pcf85263_init_hw(struct pcf85263 *pcf85263)
+{
+ struct device_node *np = pcf85263->dev->of_node;
+ unsigned int regval;
+ u32 propval;
+ int ret;
+
+ /* Determine if oscilator has been stopped (probably low power) */
+ ret = pcf85263_check_osc_stopped(pcf85263);
+ if (ret < 0) {
+ /* Log here since this is the first hw access on probe */
+ dev_err(pcf85263->dev, "Unable to read register\n");
+
+ return ret;
+ }
+
+ /* Determine 12/24H mode */
+ ret = regmap_read(pcf85263->regmap, PCF85263_REG_OSC, &regval);
+ if (ret)
+ return ret;
+ pcf85263->mode_12h = !!(regval & PCF85263_REG_OSC_12H);
+
+ /* Set oscilator register */
+ regval &= ~PCF85263_REG_OSC_12H; /* keep current 12/24 h setting */
+
+ propval = PCF85263_QUARTZCAP_12p5pF;
+ of_property_read_u32(np, "quartz-load-capacitance", &propval);
+ regval |= ((propval << PCF85263_REG_OSC_CL_SHIFT)
+ & PCF85263_REG_OSC_CL_MASK);
+
+ propval = PCF85263_QUARTZDRIVE_NORMAL;
+ of_property_read_u32(np, "quartz-drive-strength", &propval);
+ regval |= ((propval << PCF85263_REG_OSC_OSCD_SHIFT)
+ & PCF85263_REG_OSC_OSCD_MASK);
+
+ if (of_property_read_bool(np, "quartz-low-jitter"))
+ regval |= PCF85263_REG_OSC_LOWJ;
+
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_OSC, regval);
+ if (ret)
+ return ret;
+
+ /* Set function register (RTC mode, 1s tick, clock output static) */
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_FUNCTION,
+ PCF85263_REG_FUNCTION_COF_OFF);
+ if (ret)
+ return ret;
+
+ /* Set all interrupts to disabled, level mode */
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_INTA_CTL,
+ PCF85263_REG_INTx_CTL_ILP);
+ if (ret)
+ return ret;
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_INTB_CTL,
+ PCF85263_REG_INTx_CTL_ILP);
+ if (ret)
+ return ret;
+
+ /* Setup IO pin config register */
+ regval = PCF85263_REG_PINIO_CLKDISABLE;
+ switch (pcf85263->irq_pin) {
+ case PCF85263_IRQPIN_INTA:
+ regval |= (PCF85263_INTAPM_INTA | PCF85263_TSPM_DISABLED);
+ break;
+ case PCF85263_IRQPIN_INTB:
+ regval |= (PCF85263_INTAPM_HIGHZ | PCF85263_TSPM_INTB);
+ break;
+ case PCF85263_IRQPIN_NONE:
+ regval |= (PCF85263_INTAPM_HIGHZ | PCF85263_TSPM_DISABLED);
+ break;
+ }
+ ret = regmap_write(pcf85263->regmap, PCF85263_REG_PINIO, regval);
+
+ return ret;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+ .ioctl = pcf85263_ioctl,
+ .read_time = pcf85263_read_time,
+ .set_time = pcf85263_set_time,
+ .read_alarm = pcf85263_read_alarm,
+ .set_alarm = pcf85263_set_alarm,
+ .alarm_irq_enable = pcf85263_alarm_irq_enable,
+};
+
+static const struct regmap_config pcf85263_regmap_cfg = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = PCF85263_MAX_REG,
+};
+
+/*
+ * On some boards the interrupt line may not be wired to the CPU but only to
+ * a power supply circuit.
+ * In that case no interrupt will be specified in the device tree but the
+ * wakeup-source DT property may be used to enable wakeup programming in
+ * sysfs
+ */
+static bool pcf85263_can_wakeup_machine(struct pcf85263 *pcf85263)
+{
+ return pcf85263->irq ||
+ of_property_read_bool(pcf85263->dev->of_node, "wakeup-source");
+}
+
+static int pcf85263_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct pcf85263 *pcf85263;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -ENODEV;
+
+ pcf85263 = devm_kzalloc(dev, sizeof(*pcf85263), GFP_KERNEL);
+ if (!pcf85263)
+ return -ENOMEM;
+
+ pcf85263->dev = dev;
+ pcf85263->irq = client->irq;
+ dev_set_drvdata(dev, pcf85263);
+
+ pcf85263->regmap = devm_regmap_init_i2c(client, &pcf85263_regmap_cfg);
+ if (IS_ERR(pcf85263->regmap)) {
+ ret = PTR_ERR(pcf85263->regmap);
+ dev_err(dev, "regmap allocation failed (%d)\n", ret);
+
+ return ret;
+ }
+
+ /* Determine which interrupt pin the board uses */
+ if (pcf85263_can_wakeup_machine(pcf85263)) {
+ if (of_property_match_string(dev->of_node,
+ "interrupt-names", "INTB") >= 0)
+ pcf85263->irq_pin = PCF85263_IRQPIN_INTB;
+ else
+ pcf85263->irq_pin = PCF85263_IRQPIN_INTA;
+ } else {
+ pcf85263->irq_pin = PCF85263_IRQPIN_NONE;
+ }
+
+ ret = pcf85263_init_hw(pcf85263);
+ if (ret)
+ return ret;
+
+ if (pcf85263->irq) {
+ ret = devm_request_threaded_irq(dev, pcf85263->irq, NULL,
+ pcf85263_irq,
+ IRQF_ONESHOT,
+ dev->driver->name, pcf85263);
+ if (ret) {
+ dev_err(dev, "irq %d unavailable (%d)\n",
+ pcf85263->irq, ret);
+ pcf85263->irq = 0;
+ }
+ }
+
+ if (pcf85263_can_wakeup_machine(pcf85263))
+ device_init_wakeup(dev, true);
+
+ pcf85263->rtc = devm_rtc_device_register(dev, dev->driver->name,
+ &rtc_ops, THIS_MODULE);
+ ret = PTR_ERR_OR_ZERO(pcf85263->rtc);
+ if (ret)
+ return ret;
+
+ /* We cannot support UIE mode if we do not have an IRQ line */
+ if (!pcf85263->irq)
+ pcf85263->rtc->uie_unsupported = 1;
+
+ dev_info(pcf85263->dev,
+ "PCF85263 RTC (irqpin=%s irq=%d)\n",
+ pcf85263_irqpin_names[pcf85263->irq_pin],
+ pcf85263->irq);
+
+ return 0;
+}
+
+static int pcf85263_remove(struct i2c_client *client)
+{
+ struct pcf85263 *pcf85263 = i2c_get_clientdata(client);
+
+ if (pcf85263_can_wakeup_machine(pcf85263))
+ device_init_wakeup(pcf85263->dev, false);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pcf85263_suspend(struct device *dev)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev))
+ ret = enable_irq_wake(pcf85263->irq);
+
+ return ret;
+}
+
+static int pcf85263_resume(struct device *dev)
+{
+ struct pcf85263 *pcf85263 = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev))
+ ret = disable_irq_wake(pcf85263->irq);
+
+ return ret;
+}
+
+#endif
+
+static const struct i2c_device_id pcf85263_id[] = {
+ { "pcf85263", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf85263_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf85263_of_match[] = {
+ { .compatible = "nxp,pcf85263" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pcf85263_of_match);
+#endif
+
+static SIMPLE_DEV_PM_OPS(pcf85263_pm_ops, pcf85263_suspend, pcf85263_resume);
+
+static struct i2c_driver pcf85263_driver = {
+ .driver = {
+ .name = "rtc-pcf85263",
+ .of_match_table = of_match_ptr(pcf85263_of_match),
+ .pm = &pcf85263_pm_ops,
+ },
+ .probe = pcf85263_probe,
+ .remove = pcf85263_remove,
+ .id_table = pcf85263_id,
+};
+
+module_i2c_driver(pcf85263_driver);
+
+MODULE_AUTHOR("Martin Fuzzey <mfuzzey@parkeon.com>");
+MODULE_DESCRIPTION("PCF85263 RTC Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/include/dt-bindings/rtc/nxp,pcf85263.h
@@ -0,0 +1,14 @@
+#ifndef _DT_BINDINGS_RTC_NXP_PCF85263_H
+#define _DT_BINDINGS_RTC_NXP_PCF85263_H
+
+/* Quartz capacitance */
+#define PCF85263_QUARTZCAP_7pF 0
+#define PCF85263_QUARTZCAP_6pF 1
+#define PCF85263_QUARTZCAP_12p5pF 2
+
+/* Quartz drive strength */
+#define PCF85263_QUARTZDRIVE_NORMAL 0
+#define PCF85263_QUARTZDRIVE_LOW 1
+#define PCF85263_QUARTZDRIVE_HIGH 2
+
+#endif /* _DT_BINDINGS_RTC_NXP_PCF85263_H */