openwrt/package/libs/openssl/Config.in

if PACKAGE_libopenssl

comment "Build Options"

config OPENSSL_OPTIMIZE_SPEED
	bool
	default y if x86_64 || i386
	prompt "Enable optimization for speed instead of size"
	select OPENSSL_WITH_ASM
	help
		Enabling this option increases code size (around 20%) and
		performance.  The increase in performance and size depends on the
		target CPU. EC and AES seem to benefit the most, with EC speed
		increased by 20%-50% (mipsel & x86).
		AES-GCM is supposed to be 3x faster on x86. YMMV.

config OPENSSL_WITH_ASM
	bool
	default y if !SMALL_FLASH || !arm
	prompt "Compile with optimized assembly code"
	depends on !arc
	help
		Disabling this option will reduce code size and performance.
		The increase in performance and size depends on the target
		CPU and on the algorithms being optimized.  As of 1.1.0i*:

		Platform  Pkg Inc. Algorithms where assembly is used - ~% Speed Increase
		aarch64   174K     BN, aes, sha1, sha256, sha512, nist256, poly1305
		arm       152K     BN, aes, sha1, sha256, sha512, nist256, poly1305
		i386      183K     BN+147%, aes+300%, rc4+55%, sha1+160%, sha256+114%, sha512+270%, nist256+282%, poly1305+292%
		mipsel      1.5K   BN+97%, aes+4%, sha1+94%, sha256+60%
		mips64	    3.7K   BN, aes, sha1, sha256, sha512, poly1305
		powerpc    20K     BN, aes, sha1, sha256, sha512, poly1305
		x86_64    228K     BN+220%, aes+173%, rc4+38%, sha1+40%, sha256+64%, sha512+31%, nist256+354%, poly1305+228%

		* Only most common algorithms shown. Your mileage may vary.
		  BN (bignum) performance was measured using RSA sign/verify.

config OPENSSL_WITH_SSE2
	bool
	default y if !TARGET_x86_legacy && !TARGET_x86_geode
	prompt "Enable use of x86 SSE2 instructions"
	depends on OPENSSL_WITH_ASM && i386
	help
		Use of SSE2 instructions greatly increase performance (up to
		3x faster) with a minimum (~0.2%, or 23KB) increase in package
		size, but it will bring no benefit if your hardware does not
		support them, such as Geode GX and LX.  In this case you may
		save 23KB by saying yes here.  AMD Geode NX, and Intel
		Pentium 4 and above support SSE2.

config OPENSSL_WITH_DEPRECATED
	bool
	default y
	prompt "Include deprecated APIs (See help for a list of packages that need this)"
	help
		Since openssl 1.1.x is still new to openwrt, some packages
		requiring this option do not list it as a requirement yet:
		 * freeswitch-stable, freeswitch, python, python3, squid.

config OPENSSL_NO_DEPRECATED
	bool
	default !OPENSSL_WITH_DEPRECATED

config OPENSSL_WITH_ERROR_MESSAGES
	bool
	default y if !SMALL_FLASH && !LOW_MEMORY_FOOTPRINT
	prompt "Include error messages"
	help
		This option aids debugging, but increases package size and
		memory usage.

comment "Protocol Support"

config OPENSSL_WITH_TLS13
	bool
	default y
	prompt "Enable support for TLS 1.3"
	select OPENSSL_WITH_EC
	help
		TLS 1.3 is the newest version of the TLS specification.
		It aims:
		 * to increase the overall security of the protocol,
		   removing outdated algorithms, and encrypting more of the
		   protocol;
		 * to increase performance by reducing the number of round-trips
		   when performing a full handshake.
		It increases package size by ~4KB.

config OPENSSL_WITH_DTLS
	bool
	prompt "Enable DTLS support"
	help
		Datagram Transport Layer Security (DTLS) provides TLS-like security
		for datagram-based (UDP, DCCP, CAPWAP, SCTP & SRTP) applications.

config OPENSSL_WITH_NPN
	bool
	default y
	prompt "Enable NPN support"
	help
		NPN is a TLS extension, obsoleted and replaced with ALPN,
		used to negotiate SPDY, and HTTP/2.

config OPENSSL_WITH_SRP
	bool
	default y
	prompt "Enable SRP support"
	help
		The Secure Remote Password protocol (SRP) is an augmented
		password-authenticated key agreement (PAKE) protocol, specifically
		designed to work around existing patents.

config OPENSSL_WITH_CMS
	bool
	default y
	prompt "Enable CMS (RFC 5652) support"
	help
		Cryptographic Message Syntax (CMS) is used to digitally sign,
		digest, authenticate, or encrypt arbitrary message content.

comment "Algorithm Selection"

config OPENSSL_WITH_EC
	bool
	default y
	prompt "Enable elliptic curve support"
	help
		Elliptic-curve cryptography (ECC) is an approach to public-key
		cryptography based on the algebraic structure of elliptic curves
		over finite fields. ECC requires smaller keys compared to non-ECC
		cryptography to provide equivalent security.

config OPENSSL_WITH_EC2M
	bool
	depends on OPENSSL_WITH_EC
	prompt "Enable ec2m support"
	help
		This option enables the more efficient, yet less common, binary
		field elliptic curves.

config OPENSSL_WITH_CHACHA_POLY1305
	bool
	default y
	prompt "Enable ChaCha20-Poly1305 ciphersuite support"
	help
		ChaCha20-Poly1305 is an AEAD ciphersuite with 256-bit keys,
		combining ChaCha stream cipher with Poly1305 MAC.
		It is 3x faster than AES, when not using a CPU with AES-specific
		instructions, as is the case of most embedded devices.

config OPENSSL_PREFER_CHACHA_OVER_GCM
	bool
	default y if !x86_64 && !aarch64
	prompt "Prefer ChaCha20-Poly1305 over AES-GCM by default"
	depends on OPENSSL_WITH_CHACHA_POLY1305
	help
		The default openssl preference is for AES-GCM before ChaCha, but
		that takes into account AES-NI capable chips.  It is not the
		case with most embedded chips, so it may be better to invert
		that preference.  This is just for the default case. The
		application can always override this.

config OPENSSL_WITH_PSK
	bool
	default y
	prompt "Enable PSK support"
	help
		Build support for Pre-Shared Key based cipher suites.

comment "Less commonly used build options"

config OPENSSL_WITH_ARIA
	bool
	prompt "Enable ARIA support"
	help
		ARIA is a block cipher developed in South Korea, based on AES.

config OPENSSL_WITH_CAMELLIA
	bool
	prompt "Enable Camellia cipher support"
	help
		Camellia is a bock cipher with security levels and processing
		abilities comparable to AES.

config OPENSSL_WITH_IDEA
	bool
	prompt "Enable IDEA cipher support"
	help
		IDEA is a block cipher with 128-bit keys.

config OPENSSL_WITH_SEED
	bool
	prompt "Enable SEED cipher support"
	help
		SEED is a block cipher with 128-bit keys broadly used in
		South Korea, but seldom found elsewhere.

config OPENSSL_WITH_SM234
	bool
	prompt "Enable SM2/3/4 algorithms support"
	help
		These algorithms are a set of "Commercial Cryptography"
		algorithms approved for use in China.
		  * SM2 is an EC algorithm equivalent to ECDSA P-256
		  * SM3 is a hash function equivalent to SHA-256
		  * SM4 is a 128-block cipher equivalent to AES-128

config OPENSSL_WITH_BLAKE2
	bool
	prompt "Enable BLAKE2 digest support"
	help
		BLAKE2 is a cryptographic hash function based on the ChaCha
		stream cipher.

config OPENSSL_WITH_MDC2
	bool
	prompt "Enable MDC2 digest support"

config OPENSSL_WITH_WHIRLPOOL
	bool
	prompt "Enable Whirlpool digest support"

config OPENSSL_WITH_COMPRESSION
	bool
	prompt "Enable compression support"
	help
		TLS compression is not recommended, as it is deemed insecure.
		The CRIME attack exploits this weakness.
		Even with this option turned on, it is disabled by default, and the
		application must explicitly turn it on.

config OPENSSL_WITH_RFC3779
	bool
	prompt "Enable RFC3779 support (BGP)"
	help
		RFC 3779 defines two X.509 v3 certificate extensions.  The first
		binds a list of IP address blocks, or prefixes, to the subject of a
		certificate.  The second binds a list of autonomous system
		identifiers to the subject of a certificate.  These extensions may be
		used to convey the authorization of the subject to use the IP
		addresses and autonomous system identifiers contained in the
		extensions.

comment "Engine/Hardware Support"

config OPENSSL_ENGINE
	bool "Enable engine support"
	help
		This enables alternative cryptography implementations,
		most commonly for interfacing with external crypto devices,
		or supporting new/alternative ciphers and digests.
		Note that you need to enable KERNEL_AIO to be able to build the
		afalg engine package.

config OPENSSL_ENGINE_BUILTIN
	bool "Build chosen engines into libcrypto"
	depends on OPENSSL_ENGINE
	help
		This builds all chosen engines into libcrypto.so, instead of building
		them as dynamic engines in separate packages.
		The benefit of building the engines into libcrypto is that they won't
		require any configuration to be used by default.

config OPENSSL_ENGINE_BUILTIN_AFALG
	bool
	prompt "Acceleration support through AF_ALG sockets engine"
	depends on OPENSSL_ENGINE_BUILTIN && KERNEL_AIO && !LINUX_3_18
	select PACKAGE_libopenssl-conf
	help
		This enables use of hardware acceleration through the
		AF_ALG kenrel interface.

config OPENSSL_ENGINE_BUILTIN_DEVCRYPTO
	bool
	prompt "Acceleration support through /dev/crypto"
	depends on OPENSSL_ENGINE_BUILTIN
	select PACKAGE_libopenssl-conf
	help
		This enables use of hardware acceleration through OpenBSD
		Cryptodev API (/dev/crypto) interface.

config OPENSSL_ENGINE_BUILTIN_PADLOCK
	bool
	prompt "VIA Padlock Acceleration support engine"
	depends on OPENSSL_ENGINE_BUILTIN && TARGET_x86
	select PACKAGE_libopenssl-conf
	help
		This enables use of hardware acceleration through the
		VIA Padlock module.

config OPENSSL_WITH_ASYNC
	bool
	prompt "Enable asynchronous jobs support"
	depends on OPENSSL_ENGINE && USE_GLIBC
	help
		Enables async-aware applications to be able to use OpenSSL to
		initiate crypto operations asynchronously. In order to work
		this will require the presence of an async capable engine.

config OPENSSL_WITH_GOST
	bool
	prompt "Prepare library for GOST engine"
	depends on OPENSSL_ENGINE
	help
		This option prepares the library to accept engine support
		for Russian GOST crypto algorithms.
		The gost engine is not included in standard openwrt feeds.
		To build such engine yourself, see:
		https://github.com/gost-engine/engine

endif