openwrt/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch

--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -39,6 +39,7 @@ enum ath79_mach_type {
 	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
 	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
 	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
+	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
 	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
 	ATH79_MACH_EW_DORIN_ROUTER,	/* embedded wireless Dorin Router Platform */
 	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_USB
 
+config ATH79_MACH_DIR_825_C1
+	bool "D-Link DIR-825 rev. C1 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_EW_DORIN
 	bool "embedded wireless Dorin Platform support"
 	select SOC_AR933X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-
 obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
 obj-$(CONFIG_ATH79_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
 obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
 obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o
 obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mach-eap7660d.o
 obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o