openwrt/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch

From patchwork Fri May 29 01:42:16 2015
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [1/7] net: dsa: add new driver for ar8xxx family
From: Mathieu Olivari <mathieu@codeaurora.org>
X-Patchwork-Id: 477523
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <1432863742-18427-2-git-send-email-mathieu@codeaurora.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
 ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
 davem@davemloft.net, mathieu@codeaurora.org, andrew@lunn.ch,
 f.fainelli@gmail.com, linux@roeck-us.net, gang.chen.5i5j@gmail.com,
 jiri@resnulli.us, leitec@staticky.com, fabf@skynet.be,
 alexander.h.duyck@intel.com, pavel.nakonechny@skitlab.ru,
 joe@perches.com, sfeldma@gmail.com, nbd@nbd.name, juhosg@openwrt.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
 netdev@vger.kernel.org
Date: Thu, 28 May 2015 18:42:16 -0700

This patch contains initial init & registration code for QCA8337. It
will detect a QCA8337 switch, if present and declared in DT/platform.

Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Ports cannot communicate with each
other just yet.

Link status will be reported through polling, and we don't use any
encapsulation.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
 drivers/net/dsa/Kconfig  |   7 ++
 drivers/net/dsa/Makefile |   1 +
 drivers/net/dsa/ar8xxx.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/ar8xxx.h |  82 +++++++++++++
 net/dsa/dsa.c            |   1 +
 5 files changed, 394 insertions(+)
 create mode 100644 drivers/net/dsa/ar8xxx.c
 create mode 100644 drivers/net/dsa/ar8xxx.h

--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -65,4 +65,13 @@ config NET_DSA_BCM_SF2
 	  This enables support for the Broadcom Starfighter 2 Ethernet
 	  switch chips.
 
+config NET_DSA_AR8XXX
+	tristate "Qualcomm Atheros AR8XXX Ethernet switch family support"
+	depends on NET_DSA
+	select NET_DSA_TAG_QCA
+	select REGMAP
+	---help---
+	  This enables support for the Qualcomm Atheros AR8XXX Ethernet
+	  switch chips.
+
 endmenu
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -14,3 +14,4 @@ ifdef CONFIG_NET_DSA_MV88E6171
 mv88e6xxx_drv-y += mv88e6171.o
 endif
 obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm_sf2.o
+obj-$(CONFIG_NET_DSA_AR8XXX)	+= ar8xxx.o
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.c
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+
+#include "ar8xxx.h"
+
+#define MIB_DESC(_s, _o, _n)	\
+	{			\
+		.size = (_s),	\
+		.offset = (_o),	\
+		.name = (_n),	\
+	}
+
+static const struct ar8xxx_mib_desc ar8327_mib[] = {
+	MIB_DESC(1, 0x00, "RxBroad"),
+	MIB_DESC(1, 0x04, "RxPause"),
+	MIB_DESC(1, 0x08, "RxMulti"),
+	MIB_DESC(1, 0x0c, "RxFcsErr"),
+	MIB_DESC(1, 0x10, "RxAlignErr"),
+	MIB_DESC(1, 0x14, "RxRunt"),
+	MIB_DESC(1, 0x18, "RxFragment"),
+	MIB_DESC(1, 0x1c, "Rx64Byte"),
+	MIB_DESC(1, 0x20, "Rx128Byte"),
+	MIB_DESC(1, 0x24, "Rx256Byte"),
+	MIB_DESC(1, 0x28, "Rx512Byte"),
+	MIB_DESC(1, 0x2c, "Rx1024Byte"),
+	MIB_DESC(1, 0x30, "Rx1518Byte"),
+	MIB_DESC(1, 0x34, "RxMaxByte"),
+	MIB_DESC(1, 0x38, "RxTooLong"),
+	MIB_DESC(2, 0x3c, "RxGoodByte"),
+	MIB_DESC(2, 0x44, "RxBadByte"),
+	MIB_DESC(1, 0x4c, "RxOverFlow"),
+	MIB_DESC(1, 0x50, "Filtered"),
+	MIB_DESC(1, 0x54, "TxBroad"),
+	MIB_DESC(1, 0x58, "TxPause"),
+	MIB_DESC(1, 0x5c, "TxMulti"),
+	MIB_DESC(1, 0x60, "TxUnderRun"),
+	MIB_DESC(1, 0x64, "Tx64Byte"),
+	MIB_DESC(1, 0x68, "Tx128Byte"),
+	MIB_DESC(1, 0x6c, "Tx256Byte"),
+	MIB_DESC(1, 0x70, "Tx512Byte"),
+	MIB_DESC(1, 0x74, "Tx1024Byte"),
+	MIB_DESC(1, 0x78, "Tx1518Byte"),
+	MIB_DESC(1, 0x7c, "TxMaxByte"),
+	MIB_DESC(1, 0x80, "TxOverSize"),
+	MIB_DESC(2, 0x84, "TxByte"),
+	MIB_DESC(1, 0x8c, "TxCollision"),
+	MIB_DESC(1, 0x90, "TxAbortCol"),
+	MIB_DESC(1, 0x94, "TxMultiCol"),
+	MIB_DESC(1, 0x98, "TxSingleCol"),
+	MIB_DESC(1, 0x9c, "TxExcDefer"),
+	MIB_DESC(1, 0xa0, "TxDefer"),
+	MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+u32
+ar8xxx_mii_read32(struct mii_bus *bus, int phy_id, int regnum)
+{
+	u16 lo, hi;
+
+	lo = bus->read(bus, phy_id, regnum);
+	hi = bus->read(bus, phy_id, regnum + 1);
+
+	return (hi << 16) | lo;
+}
+
+void
+ar8xxx_mii_write32(struct mii_bus *bus, int phy_id, int regnum, u32 val)
+{
+	u16 lo, hi;
+
+	lo = val & 0xffff;
+	hi = (u16)(val >> 16);
+
+	bus->write(bus, phy_id, regnum, lo);
+	bus->write(bus, phy_id, regnum + 1, hi);
+}
+
+u32 ar8xxx_read(struct dsa_switch *ds, int reg)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+	u32 val;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+	val = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return val;
+}
+
+void ar8xxx_write(struct dsa_switch *ds, int reg, u32 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+	ar8xxx_mii_write32(bus, 0x10 | r2, r1, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+	u32 ret;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+
+	ret = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+	ret &= ~mask;
+	ret |= val;
+	ar8xxx_mii_write32(bus, 0x10 | r2, r1, ret);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return ret;
+}
+
+static char *ar8xxx_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	u32 phy_id;
+
+	if (!bus)
+		return NULL;
+
+	/* sw_addr is irrelevant as the switch occupies the MDIO bus from
+	 * addresses 0 to 4 (PHYs) and 16-23 (for MDIO 32bits protocol). So
+	 * we'll probe address 0 to see if we see the right switch family.
+	 */
+	phy_id = mdiobus_read(bus, 0, MII_PHYSID1) << 16;
+	phy_id |= mdiobus_read(bus, 0, MII_PHYSID2);
+
+	switch (phy_id) {
+	case PHY_ID_QCA8337:
+		return "QCA8337";
+	default:
+		return NULL;
+	}
+}
+
+static int ar8xxx_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+	struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+	*val = ar8xxx_read(ds, reg);
+
+	return 0;
+}
+
+static int ar8xxx_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+	struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+	ar8xxx_write(ds, reg, val);
+
+	return 0;
+}
+
+static const struct regmap_range ar8xxx_readable_ranges[] = {
+	regmap_reg_range(0x0000, 0x00e4), /* Global control */
+	regmap_reg_range(0x0100, 0x0168), /* EEE control */
+	regmap_reg_range(0x0200, 0x0270), /* Parser control */
+	regmap_reg_range(0x0400, 0x0454), /* ACL */
+	regmap_reg_range(0x0600, 0x0718), /* Lookup */
+	regmap_reg_range(0x0800, 0x0b70), /* QM */
+	regmap_reg_range(0x0C00, 0x0c80), /* PKT */
+	regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+	regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+	regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+	regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+	regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+	regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+	regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static struct regmap_access_table ar8xxx_readable_table = {
+	.yes_ranges = ar8xxx_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ar8xxx_readable_ranges),
+};
+
+struct regmap_config ar8xxx_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x16ac, /* end MIB - Port6 range */
+	.reg_read = ar8xxx_regmap_read,
+	.reg_write = ar8xxx_regmap_write,
+	.rd_table = &ar8xxx_readable_table,
+};
+
+static int ar8xxx_set_pad_ctrl(struct dsa_switch *ds, int port, int mode)
+{
+	int reg;
+
+	switch (port) {
+	case 0:
+		reg = AR8327_REG_PORT0_PAD_CTRL;
+		break;
+	case 6:
+		reg = AR8327_REG_PORT6_PAD_CTRL;
+		break;
+	default:
+		pr_err("Can't set PAD_CTRL on port %d\n", port);
+		return -EINVAL;
+	}
+
+	/* DSA only supports 1 CPU port for now, so we'll take the assumption
+	 * that P0 is connected to the CPU master_dev.
+	 */
+	switch (mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		ar8xxx_write(ds, reg,
+			     AR8327_PORT_PAD_RGMII_EN |
+			     AR8327_PORT_PAD_RGMII_TX_DELAY(3) |
+			     AR8327_PORT_PAD_RGMII_RX_DELAY(3));
+
+		/* According to the datasheet, RGMII delay is enabled through
+		 * PORT5_PAD_CTRL for all ports, rather than individual port
+		 * registers
+		 */
+		ar8xxx_write(ds, AR8327_REG_PORT5_PAD_CTRL,
+			     AR8327_PORT_PAD_RGMII_RX_DELAY_EN);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		ar8xxx_write(ds, reg, AR8327_PORT_PAD_SGMII_EN);
+		break;
+	default:
+		pr_err("xMII mode %d not supported\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ar8xxx_of_setup(struct dsa_switch *ds)
+{
+	struct device_node *dn = ds->pd->of_node;
+	const char *s_phymode;
+	int ret, mode;
+	u32 phy_id, ctrl;
+
+	/* If port6-phy-mode property exists, configure it accordingly */
+	if (!of_property_read_string(dn, "qca,port6-phy-mode", &s_phymode)) {
+		for (mode = 0; mode < PHY_INTERFACE_MODE_MAX; mode++)
+			if (!strcasecmp(s_phymode, phy_modes(mode)))
+				break;
+
+		if (mode == PHY_INTERFACE_MODE_MAX)
+			pr_err("Unknown phy-mode: \"%s\"\n", s_phymode);
+
+		ret = ar8xxx_set_pad_ctrl(ds, 6, mode);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* If a phy ID is specified for PORT6 mac, connect them together */
+	if (!of_property_read_u32(dn, "qca,port6-phy-id", &phy_id)) {
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(6),
+			   AR8327_PORT_LOOKUP_MEMBER, BIT(phy_to_port(phy_id)));
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy_to_port(phy_id)),
+			   AR8327_PORT_LOOKUP_MEMBER, BIT(6));
+
+		/* We want the switch to be pass-through and act like a PHY on
+		 * these ports. So BC/MC/UC & IGMP frames need to be accepted
+		 */
+		ctrl = BIT(phy_to_port(phy_id)) | BIT(6);
+		ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+	}
+
+	return 0;
+}
+
+static int ar8xxx_setup(struct dsa_switch *ds)
+{
+	struct ar8xxx_priv *priv = ds_to_priv(ds);
+	struct net_device *netdev = ds->dst->pd->of_netdev;
+	int ret, i, phy_mode;
+
+	/* Start by setting up the register mapping */
+	priv->regmap = devm_regmap_init(ds->master_dev, NULL, ds,
+					&ar8xxx_regmap_config);
+
+	if (IS_ERR(priv->regmap))
+		pr_warn("regmap initialization failed");
+
+	/* Initialize CPU port pad mode (xMII type, delays...) */
+	phy_mode = of_get_phy_mode(netdev->dev.parent->of_node);
+	if (phy_mode < 0) {
+		pr_err("Can't find phy-mode for master device\n");
+		return phy_mode;
+	}
+
+	ret = ar8xxx_set_pad_ctrl(ds, 0, phy_mode);
+	if (ret < 0)
+		return ret;
+
+	/* Enable CPU Port */
+	ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL0,
+		       AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+
+	/* Enable MIB counters */
+	ar8xxx_reg_set(ds, AR8327_REG_MIB, AR8327_MIB_CPU_KEEP);
+	ar8xxx_write(ds, AR8327_REG_MODULE_EN, AR8327_MODULE_EN_MIB);
+
+	/* Enable QCA header mode on Port 0 */
+	ar8xxx_write(ds, AR8327_REG_PORT_HDR_CTRL(0),
+		     AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_TX_S |
+		     AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_RX_S);
+
+	/* Disable forwarding by default on all ports */
+	for (i = 0; i < AR8327_NUM_PORTS; i++)
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(i),
+			   AR8327_PORT_LOOKUP_MEMBER, 0);
+
+	/* Forward all unknown frames to CPU port for Linux processing */
+	ar8xxx_write(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+
+	/* Setup connection between CPU ports & PHYs */
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		/* CPU port gets connected to all PHYs in the switch */
+		if (dsa_is_cpu_port(ds, i)) {
+			ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(0),
+				   AR8327_PORT_LOOKUP_MEMBER,
+				   ds->phys_port_mask << 1);
+		}
+
+		/* Invividual PHYs gets connected to CPU port only */
+		if (ds->phys_port_mask & BIT(i)) {
+			int phy = phy_to_port(i);
+
+			ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+				   AR8327_PORT_LOOKUP_MEMBER, BIT(0));
+
+			/* Disable Auto-learning by default so the switch
+			 * doesn't try to forward the frame to another port
+			 */
+			ar8xxx_reg_clear(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+					 AR8327_PORT_LOOKUP_LEARN);
+		}
+	}
+
+	ret = ar8xxx_of_setup(ds);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ar8xxx_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	return 0;
+}
+
+static int ar8xxx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	return mdiobus_read(bus, phy, regnum);
+}
+
+static int
+ar8xxx_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	return mdiobus_write(bus, phy, regnum, val);
+}
+
+static void ar8xxx_get_strings(struct dsa_switch *ds, int phy, uint8_t *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+		strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+			ETH_GSTRING_LEN);
+	}
+}
+
+static void ar8xxx_get_ethtool_stats(struct dsa_switch *ds, int phy,
+				     uint64_t *data)
+{
+	const struct ar8xxx_mib_desc *mib;
+	uint32_t reg, i, port;
+	u64 hi;
+
+	port = phy_to_port(phy);
+
+	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+		mib = &ar8327_mib[i];
+		reg = AR8327_PORT_MIB_COUNTER(port) + mib->offset;
+
+		data[i] = ar8xxx_read(ds, reg);
+		if (mib->size == 2) {
+			hi = ar8xxx_read(ds, reg + 4);
+			data[i] |= hi << 32;
+		}
+	}
+}
+
+static int ar8xxx_get_sset_count(struct dsa_switch *ds)
+{
+	return ARRAY_SIZE(ar8327_mib);
+}
+
+static void ar8xxx_poll_link(struct dsa_switch *ds)
+{
+	int i = 0;
+	struct net_device *dev;
+
+	while ((dev = ds->ports[i++]) != NULL) {
+		u32 status;
+		int link;
+		int speed;
+		int duplex;
+
+		status = ar8xxx_read(ds, AR8327_REG_PORT_STATUS(i));
+		link = !!(status & AR8XXX_PORT_STATUS_LINK_UP);
+		duplex = !!(status & AR8XXX_PORT_STATUS_DUPLEX);
+
+		switch (status & AR8XXX_PORT_STATUS_SPEED) {
+		case AR8XXX_PORT_SPEED_10M:
+			speed = 10;
+			break;
+		case AR8XXX_PORT_SPEED_100M:
+			speed = 100;
+			break;
+		case AR8XXX_PORT_SPEED_1000M:
+			speed = 1000;
+			break;
+		default:
+			speed = 0;
+		}
+
+		if (!link) {
+			/* This poll happens every ~1s, so we don't want to
+			 * print the status every time. Only when the device
+			 * transitions from Link UP to Link DOWN
+			 */
+			if (netif_carrier_ok(dev))
+				netif_carrier_off(dev);
+			continue;
+		} else {
+			/* Same thing here. But we detect a Link UP event */
+			if (!netif_carrier_ok(dev))
+				netif_carrier_on(dev);
+			continue;
+		}
+	}
+}
+
+static struct dsa_switch_driver ar8xxx_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_QCA,
+	.priv_size		= sizeof(struct ar8xxx_priv),
+	.probe			= ar8xxx_probe,
+	.setup			= ar8xxx_setup,
+	.set_addr		= ar8xxx_set_addr,
+	.poll_link		= ar8xxx_poll_link,
+	.phy_read		= ar8xxx_phy_read,
+	.phy_write		= ar8xxx_phy_write,
+	.get_strings		= ar8xxx_get_strings,
+	.get_ethtool_stats	= ar8xxx_get_ethtool_stats,
+	.get_sset_count		= ar8xxx_get_sset_count,
+};
+
+static int __init ar8xxx_init(void)
+{
+	register_switch_driver(&ar8xxx_switch_driver);
+	return 0;
+}
+module_init(ar8xxx_init);
+
+static void __exit ar8xxx_cleanup(void)
+{
+	unregister_switch_driver(&ar8xxx_switch_driver);
+}
+module_exit(ar8xxx_cleanup);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Driver for AR8XXX ethernet switch family");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ar8xxx");
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AR8XXX_H
+#define __AR8XXX_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+struct ar8xxx_priv {
+	struct regmap *regmap;
+};
+
+struct ar8xxx_mib_desc {
+	unsigned int size;
+	unsigned int offset;
+	const char *name;
+};
+
+#define AR8327_NUM_PORTS		7
+
+#define PHY_ID_QCA8337			0x004dd036
+
+#define AR8327_REG_PORT0_PAD_CTRL		0x004
+#define AR8327_REG_PORT5_PAD_CTRL		0x008
+#define AR8327_REG_PORT6_PAD_CTRL		0x00c
+#define   AR8327_PORT_PAD_RGMII_EN		BIT(26)
+#define   AR8327_PORT_PAD_RGMII_TX_DELAY(x)	((0x8 + (x & 0x3)) << 22)
+#define   AR8327_PORT_PAD_RGMII_RX_DELAY(x)	((0x10 + (x & 0x3)) << 20)
+#define   AR8327_PORT_PAD_RGMII_RX_DELAY_EN	BIT(24)
+#define   AR8327_PORT_PAD_SGMII_EN		BIT(7)
+
+#define AR8327_REG_MODULE_EN			0x030
+#define   AR8327_MODULE_EN_MIB			BIT(0)
+#define	  AR8327_MODULE_EN_ACL			BIT(1)
+#define	  AR8327_MODULE_EN_L3			BIT(2)
+
+#define AR8327_REG_MIB				0x034
+#define   AR8327_MIB_CPU_KEEP			BIT(20)
+
+#define AR8327_REG_PORT_STATUS(_i)		(0x07c + (_i) * 4)
+#define   AR8XXX_PORT_STATUS_SPEED	GENMASK(2, 0)
+#define   AR8XXX_PORT_STATUS_SPEED_S	0
+#define   AR8XXX_PORT_STATUS_TXMAC	BIT(2)
+#define   AR8XXX_PORT_STATUS_RXMAC	BIT(3)
+#define   AR8XXX_PORT_STATUS_TXFLOW	BIT(4)
+#define   AR8XXX_PORT_STATUS_RXFLOW	BIT(5)
+#define   AR8XXX_PORT_STATUS_DUPLEX	BIT(6)
+#define   AR8XXX_PORT_STATUS_LINK_UP	BIT(8)
+#define   AR8XXX_PORT_STATUS_LINK_AUTO	BIT(9)
+#define   AR8XXX_PORT_STATUS_LINK_PAUSE	BIT(10)
+
+#define AR8327_REG_PORT_HDR_CTRL(_i)		(0x9c + (_i * 4))
+#define   AR8327_PORT_HDR_CTRL_RX_MASK		GENMASK(3, 2)
+#define   AR8327_PORT_HDR_CTRL_RX_S		2
+#define   AR8327_PORT_HDR_CTRL_TX_MASK		GENMASK(1, 0)
+#define   AR8327_PORT_HDR_CTRL_TX_S		0
+#define   AR8327_PORT_HDR_CTRL_ALL		2
+#define   AR8327_PORT_HDR_CTRL_MGMT		1
+#define   AR8327_PORT_HDR_CTRL_NONE		0
+
+#define AR8327_REG_GLOBAL_FW_CTRL0		0x620
+#define   AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN	BIT(10)
+
+#define AR8327_REG_GLOBAL_FW_CTRL1		0x624
+#define   AR8327_GLOBAL_FW_CTRL1_IGMP_DP_MASK	GENMASK(30, 24)
+#define   AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S	24
+#define   AR8327_GLOBAL_FW_CTRL1_BC_DP_MASK	GENMASK(22, 16)
+#define   AR8327_GLOBAL_FW_CTRL1_BC_DP_S	16
+#define   AR8327_GLOBAL_FW_CTRL1_MC_DP_MASK	GENMASK(14, 8)
+#define   AR8327_GLOBAL_FW_CTRL1_MC_DP_S	8
+#define   AR8327_GLOBAL_FW_CTRL1_UC_DP_MASK	GENMASK(6, 0)
+#define   AR8327_GLOBAL_FW_CTRL1_UC_DP_S	0
+
+#define AR8327_PORT_LOOKUP_CTRL(_i)		(0x660 + (_i) * 0xc)
+#define   AR8327_PORT_LOOKUP_MEMBER		GENMASK(6, 0)
+#define   AR8327_PORT_LOOKUP_IN_MODE		GENMASK(9, 8)
+#define   AR8327_PORT_LOOKUP_IN_MODE_S		8
+#define   AR8327_PORT_LOOKUP_STATE		GENMASK(18, 16)
+#define   AR8327_PORT_LOOKUP_STATE_S		16
+#define   AR8327_PORT_LOOKUP_LEARN		BIT(20)
+#define   AR8327_PORT_LOOKUP_ING_MIRROR_EN	BIT(25)
+
+#define AR8327_PORT_MIB_COUNTER(_i)		(0x1000 + (_i) * 0x100)
+
+/* port speed */
+enum {
+	AR8XXX_PORT_SPEED_10M = 0,
+	AR8XXX_PORT_SPEED_100M = 1,
+	AR8XXX_PORT_SPEED_1000M = 2,
+	AR8XXX_PORT_SPEED_ERR = 3,
+};
+
+static inline int port_to_phy(int port)
+{
+	if (port >= 1 && port <= 6)
+		return port - 1;
+
+	return -1;
+}
+
+static inline int phy_to_port(int phy)
+{
+	if (phy < 5)
+		return phy + 1;
+
+	return -1;
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val);
+
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+	regaddr >>= 1;
+	*r1 = regaddr & 0x1e;
+
+	regaddr >>= 5;
+	*r2 = regaddr & 0x7;
+
+	regaddr >>= 3;
+	*page = regaddr & 0x1ff;
+}
+
+static inline void
+wait_for_page_switch(void)
+{
+	udelay(5);
+}
+
+static inline void
+ar8xxx_reg_set(struct dsa_switch *ds, int reg, u32 val)
+{
+	ar8xxx_rmw(ds, reg, 0, val);
+}
+
+static inline void
+ar8xxx_reg_clear(struct dsa_switch *ds, int reg, u32 val)
+{
+	ar8xxx_rmw(ds, reg, val, 0);
+}
+
+#endif /* __AR8XXX_H */
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -285,6 +285,11 @@ static int dsa_switch_setup_one(struct d
 			dst->rcv = brcm_netdev_ops.rcv;
 			break;
 #endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+		case DSA_TAG_PROTO_QCA:
+			dst->rcv = qca_netdev_ops.rcv;
+			break;
+#endif
 		case DSA_TAG_PROTO_NONE:
 			break;
 		default:
@@ -1041,6 +1046,7 @@ static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa
 
 static const struct of_device_id dsa_of_match_table[] = {
 	{ .compatible = "brcm,bcm7445-switch-v4.0" },
+	{ .compatible = "qca,ar8xxx", },
 	{ .compatible = "marvell,dsa", },
 	{}
 };
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -26,6 +26,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_TRAILER,
 	DSA_TAG_PROTO_EDSA,
 	DSA_TAG_PROTO_BRCM,
+	DSA_TAG_PROTO_QCA,
 };
 
 #define DSA_MAX_SWITCHES	4
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -26,6 +26,9 @@ config NET_DSA_HWMON
 	  via the hwmon sysfs interface and exposes the onboard sensors.
 
 # tagging formats
+config NET_DSA_TAG_QCA
+	bool
+
 config NET_DSA_TAG_BRCM
 	bool
 
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o
 dsa_core-y += dsa.o slave.o
 
 # tagging formats
+dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
 dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
 dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -78,5 +78,7 @@ extern const struct dsa_device_ops trail
 /* tag_brcm.c */
 extern const struct dsa_device_ops brcm_netdev_ops;
 
+/* tag_qca.c */
+extern const struct dsa_device_ops qca_netdev_ops;
 
 #endif
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1180,6 +1180,11 @@ int dsa_slave_create(struct dsa_switch *
 		p->xmit = brcm_netdev_ops.xmit;
 		break;
 #endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+	case DSA_TAG_PROTO_QCA:
+		p->xmit = qca_netdev_ops.xmit;
+		break;
+#endif
 	default:
 		p->xmit	= dsa_slave_notag_xmit;
 		break;
--- /dev/null
+++ b/net/dsa/tag_qca.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include "dsa_priv.h"
+
+#define QCA_HDR_LEN	2
+#define QCA_HDR_VERSION	0x2
+
+#define QCA_HDR_RECV_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_RECV_VERSION_S		14
+#define QCA_HDR_RECV_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_RECV_PRIORITY_S		11
+#define QCA_HDR_RECV_TYPE_MASK		GENMASK(10, 6)
+#define QCA_HDR_RECV_TYPE_S		6
+#define QCA_HDR_RECV_FRAME_IS_TAGGED	BIT(3)
+#define QCA_HDR_RECV_SOURCE_PORT_MASK	GENMASK(2, 0)
+
+#define QCA_HDR_XMIT_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_XMIT_VERSION_S		14
+#define QCA_HDR_XMIT_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_XMIT_PRIORITY_S		11
+#define QCA_HDR_XMIT_CONTROL_MASK	GENMASK(10, 8)
+#define QCA_HDR_XMIT_CONTROL_S		8
+#define QCA_HDR_XMIT_FROM_CPU		BIT(7)
+#define QCA_HDR_XMIT_DP_BIT_MASK	GENMASK(6, 0)
+
+static inline int reg_to_port(int reg)
+{
+	if (reg < 5)
+		return reg + 1;
+
+	return -1;
+}
+
+static inline int port_to_reg(int port)
+{
+	if (port >= 1 && port <= 6)
+		return port - 1;
+
+	return -1;
+}
+
+static netdev_tx_t qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	u16 *phdr, hdr;
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	if (skb_cow_head(skb, 0) < 0)
+		goto out_free;
+
+	skb_push(skb, QCA_HDR_LEN);
+
+	memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
+	phdr = (u16 *)(skb->data + 2 * ETH_ALEN);
+
+	/* Set the version field, and set destination port information */
+	hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
+		QCA_HDR_XMIT_FROM_CPU |
+		1 << reg_to_port(p->port);
+
+	*phdr = htons(hdr);
+
+	skb->dev = p->parent->dst->master_netdev;
+	dev_queue_xmit(skb);
+
+	return NETDEV_TX_OK;
+
+out_free:
+	kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+static int qca_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+		       struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst = dev->dsa_ptr;
+	struct dsa_switch *ds;
+	u8 ver;
+	int port, phy;
+	__be16 *phdr, hdr;
+
+	if (unlikely(!dst))
+		goto out_drop;
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
+		goto out_drop;
+
+	/* Ethernet is added by the switch between src addr and Ethertype
+	 * At this point, skb->data points to ethertype so header should be
+	 * right before
+	 */
+	phdr = (__be16 *)(skb->data - 2);
+	hdr = ntohs(*phdr);
+
+	/* Make sure the version is correct */
+	ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
+	if (unlikely(ver != QCA_HDR_VERSION))
+		goto out_drop;
+
+	/* Remove QCA tag and recalculate checksum */
+	skb_pull_rcsum(skb, QCA_HDR_LEN);
+	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
+		ETH_HLEN - QCA_HDR_LEN);
+
+	/* This protocol doesn't support cascading multiple switches so it's
+	 * safe to assume the switch is first in the tree
+	 */
+	ds = dst->ds[0];
+	if (!ds)
+		goto out_drop;
+
+	/* Get source port information */
+	port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
+	phy = port_to_reg(port);
+	if (unlikely(phy < 0) || !ds->ports[phy])
+		goto out_drop;
+
+	/* Update skb & forward the frame accordingly */
+	skb_push(skb, ETH_HLEN);
+	skb->pkt_type = PACKET_HOST;
+	skb->dev = ds->ports[phy];
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	skb->dev->stats.rx_packets++;
+	skb->dev->stats.rx_bytes += skb->len;
+
+	netif_receive_skb(skb);
+
+	return 0;
+
+out_drop:
+	kfree_skb(skb);
+out:
+	return 0;
+}
+
+const struct dsa_device_ops qca_netdev_ops = {
+	.xmit	= qca_tag_xmit,
+	.rcv	= qca_tag_rcv,
+};
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
@@ -0,0 +1,70 @@
+* Qualcomm Atheros AR8xxx switch family
+
+Required properties:
+
+- compatible: should be "qca,ar8xxx"
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #size-cells: must be 0
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt.
+
+Optional properties:
+
+- qca,port6-phy-mode: if specified, the driver will configure Port 6 in the
+  given phy-mode. See Documentation/devicetree/bindings/net/ethernet.txt for
+  the list of valid phy-mode.
+
+- qca,port6-phy-id: if specified, the driver will connect Port 6 to the PHY
+  given as a parameter. In this case, Port6 and the corresponding PHY will be
+  isolated from the rest of the switch. From a system perspective, they will
+  act as a regular PHY.
+
+Example:
+
+	dsa@0 {
+		compatible = "qca,ar8xxx";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&ethernet0>;
+		dsa,mii-bus = <&mii_bus0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			qca,port6-phy-mode = "sgmii";
+			qca,port6-phy-id = <4>;
+
+			port@0 {
+				reg = <11>;
+				label = "cpu";
+			};
+
+			port@1 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@4 {
+				reg = <3>;
+				label = "lan4";
+			};
+		};
+	};