mirror of https://github.com/hak5/openwrt.git
83 lines
2.7 KiB
Diff
83 lines
2.7 KiB
Diff
|
Content-Type: text/plain; charset="utf-8"
|
||
|
|
MIME-Version: 1.0
|
||
|
|
Content-Transfer-Encoding: 7bit
|
||
|
|
Subject: [v3,3/5] dt/bindings: qcom_nandc: Add DT bindings
|
||
|
|
From: Archit Taneja <architt@codeaurora.org>
|
||
|
|
X-Patchwork-Id: 6927141
|
||
|
|
Message-Id: <1438578498-32254-4-git-send-email-architt@codeaurora.org>
|
||
|
|
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
|
||
|
|
cernekee@gmail.com, computersforpeace@gmail.com
|
||
|
|
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
|
||
|
|
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
|
||
|
|
Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
|
||
|
|
Date: Mon, 3 Aug 2015 10:38:16 +0530
|
||
|
|
|
||
|
|
Add DT bindings document for the Qualcomm NAND controller driver.
|
||
|
|
|
||
|
|
Cc: devicetree@vger.kernel.org
|
||
|
|
|
||
|
|
v3:
|
||
|
|
- Don't use '0x' when specifying nand controller address space
|
||
|
|
- Add optional property for on-flash bbt usage
|
||
|
|
|
||
|
|
Acked-by: Andy Gross <agross@codeaurora.org>
|
||
|
|
Signed-off-by: Archit Taneja <architt@codeaurora.org>
|
||
|
|
|
||
|
|
---
|
||
|
|
.../devicetree/bindings/mtd/qcom_nandc.txt | 49 ++++++++++++++++++++++
|
||
|
|
1 file changed, 49 insertions(+)
|
||
|
|
create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
|
||
|
|
|
||
|
|
--- /dev/null
|
||
|
|
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
|
||
|
|
@@ -0,0 +1,49 @@
|
||
|
|
+* Qualcomm NAND controller
|
||
|
|
+
|
||
|
|
+Required properties:
|
||
|
|
+- compatible: should be "qcom,ebi2-nand" for IPQ806x
|
||
|
|
+- reg: MMIO address range
|
||
|
|
+- clocks: must contain core clock and always on clock
|
||
|
|
+- clock-names: must contain "core" for the core clock and "aon" for the
|
||
|
|
+ always on clock
|
||
|
|
+- dmas: DMA specifier, consisting of a phandle to the ADM DMA
|
||
|
|
+ controller node and the channel number to be used for
|
||
|
|
+ NAND. Refer to dma.txt and qcom_adm.txt for more details
|
||
|
|
+- dma-names: must be "rxtx"
|
||
|
|
+- qcom,cmd-crci: must contain the ADM command type CRCI block instance
|
||
|
|
+ number specified for the NAND controller on the given
|
||
|
|
+ platform
|
||
|
|
+- qcom,data-crci: must contain the ADM data type CRCI block instance
|
||
|
|
+ number specified for the NAND controller on the given
|
||
|
|
+ platform
|
||
|
|
+
|
||
|
|
+Optional properties:
|
||
|
|
+- nand-bus-width: bus width. Must be 8 or 16. If not present, 8 is chosen
|
||
|
|
+ as default
|
||
|
|
+
|
||
|
|
+- nand-ecc-strength: number of bits to correct per ECC step. Must be 4 or 8
|
||
|
|
+ bits. If not present, 4 is chosen as default
|
||
|
|
+- nand-on-flash-bbt: Create/use on-flash bad block table
|
||
|
|
+
|
||
|
|
+The device tree may optionally contain sub-nodes describing partitions of the
|
||
|
|
+address space. See partition.txt for more detail.
|
||
|
|
+
|
||
|
|
+Example:
|
||
|
|
+
|
||
|
|
+nand@1ac00000 {
|
||
|
|
+ compatible = "qcom,ebi2-nandc";
|
||
|
|
+ reg = <0x1ac00000 0x800>;
|
||
|
|
+
|
||
|
|
+ clocks = <&gcc EBI2_CLK>,
|
||
|
|
+ <&gcc EBI2_AON_CLK>;
|
||
|
|
+ clock-names = "core", "aon";
|
||
|
|
+
|
||
|
|
+ dmas = <&adm_dma 3>;
|
||
|
|
+ dma-names = "rxtx";
|
||
|
|
+ qcom,cmd-crci = <15>;
|
||
|
|
+ qcom,data-crci = <3>;
|
||
|
|
+
|
||
|
|
+ partition@0 {
|
||
|
|
+ ...
|
||
|
|
+ };
|
||
|
|
+};
|