openwrt/target/linux/s3c24xx/patches-2.6.26/1212-introduce-BANKCON-meddling-sysfs.patch.patch

From 3db422fde610960fdca8bd2a2b882015a62860ca Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Fri, 25 Jul 2008 23:06:20 +0100
Subject: [PATCH] introduce-BANKCON-meddling-sysfs.patch

A few questions have been flying around about how optimal
our waitstates are for various things including Glamo.

This patch introduces new sysfs nodes

/sys/devices/platform/neo1973-memconfig.0/BANKCON0
...
/sys/devices/platform/neo1973-memconfig.0/BANKCON7

If you cat them you get translated info about bus speed on
that chip select, eg,

# cat /sys/devices/platform/neo1973-memconfig.0/BANKCON1
BANKCON1 = 0x00000A40
 Type = ROM / SRAM
 PMC  = normal (1 data)
 Tacp = 2 clocks
 Tcah = 0 clocks
 Tcoh = 1 clock
 Tacc = 3 clocks
 Tcos = 1 clock
 Tacs = 0 clocks

You can write them in hex too

# echo 0x200 > /sys/devices/platform/neo1973-memconfig.0/BANKCON1

The write format for BANKCON0 - 5 looks like this

 b1..b0   PMC  Page Mode Config
 b3..b2   Tacp Page Mode Access Cycle
 b5..b4   Tcah Address hold after CS deasserted
 b7..b6   Tcoh CS hold after OE deasserted
 b10..b8  Tacc Access Cycle Period
 b12..b11 Tcos CS setup before OE asserted
 b14..b13 Tacs Address setup before CS asserted

BANKCON 6 and 7 have two extra bits

 b16..b15  MT  Memory type (00=ROM/SRAM, 11=DRAM)

If it's ROM/SRAM, the rest of the bits are as described above.
For DRAM

 b1..b0   SCAN Column address number
 b3..b2   RAS to CAS delay

The patch is intended to let people experiement on their own.  But
of course you will crash things for sure if the timing is wrong, and
you can also trash SD Card data if you make Glamo unstable, so remove
it or remount ro first.  Other horrible things are possible, but
because the settings aren't sticky, you should always be able to
recover by either normal reboot usually or at worst NOR boot and then
dfu.  Most likely you will just crash your session and have to reboot
if your settings are bad, but consider yourself warned bad things are
possible. :-)

Signed-off-by: Andy Green <andy@openmoko.com>
---
 arch/arm/mach-s3c2440/mach-gta02.c        |    6 +
 arch/arm/plat-s3c24xx/Makefile            |    3 +-
 arch/arm/plat-s3c24xx/neo1973_memconfig.c |  186 +++++++++++++++++++++++++++++
 3 files changed, 194 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/plat-s3c24xx/neo1973_memconfig.c

diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index b3d3797..f30abb6 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -412,6 +412,11 @@ struct platform_device gta02_resume_reason_device = {
 	.num_resources	= 0,
 };
 
+struct platform_device gta02_memconfig_device = {
+	.name 		= "neo1973-memconfig",
+	.num_resources	= 0,
+};
+
 static struct map_desc gta02_iodesc[] __initdata = {
 	{
 		.virtual	= 0xe0000000,
@@ -829,6 +834,7 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&gta02_nor_flash,
 	&sc32440_fiq_device,
 	&gta02_version_device,
+	&gta02_memconfig_device,
 	&gta02_resume_reason_device,
 	&s3c24xx_pwm_device,
 
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index f60dc5f..baae831 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,4 +35,5 @@ obj-$(CONFIG_MACH_NEO1973)	+= neo1973_version.o \
 				   neo1973_pm_gps.o \
 				   neo1973_pm_bt.o  \
 				   neo1973_shadow.o \
-				   neo1973_pm_resume_reason.o
+				   neo1973_pm_resume_reason.o \
+				   neo1973_memconfig.o
diff --git a/arch/arm/plat-s3c24xx/neo1973_memconfig.c b/arch/arm/plat-s3c24xx/neo1973_memconfig.c
new file mode 100644
index 0000000..55d85fc
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/neo1973_memconfig.c
@@ -0,0 +1,186 @@
+/*
+ * Memory access timing control sysfs for the s3c24xx based device
+ *
+ * (C) 2008 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/arch/regs-mem.h>
+
+static ssize_t neo1973_memconfig_read(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	int index = attr->attr.name[strlen(attr->attr.name) - 1] - '0';
+	u32 reg = *((u32 *)(S3C2410_MEMREG(((index + 1) << 2))));
+	static const char *meaning[][8] = {
+		{
+			[0] = "normal (1 data)",
+			[1] = "4 data",
+			[2] = "8 data",
+			[3] = "16 data",
+		}, {
+			[0] = "2 clocks",
+			[1] = "3 clocks",
+			[2] = "4 clocks",
+			[3] = "6 clocks",
+		}, {
+			[0] = "0 clocks",
+			[1] = "1 clock",
+			[2] = "2 clocks",
+			[3] = "4 clocks",
+		}, {
+			[0] = "1 clock",
+			[1] = "2 clocks",
+			[2] = "3 clocks",
+			[3] = "4 clocks",
+			[4] = "6 clocks",
+			[5] = "8 clocks",
+			[6] = "10 clocks",
+			[7] = "14 clocks",
+		}, { /* after this, only for CS6 and CS7 */
+			[0] = "ROM / SRAM",
+			[1] = "(illegal)",
+			[2] = "(illegal)",
+			[3] = "Sync DRAM",
+		}, {
+			[0] = "8 Column bits",
+			[1] = "9 Column bits",
+			[2] = "10 Column bits",
+			[3] = "(illegal)",
+		}, {
+			[0] = "2 clocks",
+			[1] = "3 clocks",
+			[2] = "4 clocks",
+			[3] = "(illegal)",
+		}
+	};
+
+	if (index >= 6)
+		if (((reg >> 15) & 3) == 3) /* DRAM */
+			return sprintf(buf, "BANKCON%d = 0x%08X\n DRAM:\n"
+					    "  Trcd = %s\n  SCAN = %s\n", index,
+					    reg, meaning[5][reg & 3],
+					    meaning[1][(reg >> 2) & 3]);
+
+	return sprintf(buf, "BANKCON%d = 0x%08X\n Type = %s\n PMC  = %s\n"
+			    " Tacp = %s\n Tcah = %s\n Tcoh = %s\n Tacc = %s\n"
+			    " Tcos = %s\n Tacs = %s\n",
+			    index, reg, meaning[4][(reg >> 15) & 3],
+			    meaning[0][reg & 3],
+			    meaning[1][(reg >> 2) & 3],
+			    meaning[2][(reg >> 4) & 3],
+			    meaning[2][(reg >> 6) & 3],
+			    meaning[3][(reg >> 8) & 7],
+			    meaning[2][(reg >> 11) & 3],
+			    meaning[2][(reg >> 13) & 3]);
+}
+
+static ssize_t neo1973_memconfig_write(struct device *dev,
+		   struct device_attribute *attr, const char *buf, size_t count)
+{
+	int index = attr->attr.name[strlen(attr->attr.name) - 1] - '0';
+	unsigned long val = simple_strtoul(buf, NULL, 16);
+
+	dev_info(dev, "setting BANKCON%d <- 0x%08X\n", index, (u32)val);
+
+	*((u32 *)(S3C2410_MEMREG(((index + 1) << 2)))) = (u32)val;
+
+	return count;
+}
+
+
+static DEVICE_ATTR(BANKCON0, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON1, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON2, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON3, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON4, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON5, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON6, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+static DEVICE_ATTR(BANKCON7, 0644, neo1973_memconfig_read,
+						       neo1973_memconfig_write);
+
+static struct attribute *neo1973_memconfig_sysfs_entries[] = {
+	&dev_attr_BANKCON0.attr,
+	&dev_attr_BANKCON1.attr,
+	&dev_attr_BANKCON2.attr,
+	&dev_attr_BANKCON3.attr,
+	&dev_attr_BANKCON4.attr,
+	&dev_attr_BANKCON5.attr,
+	&dev_attr_BANKCON6.attr,
+	&dev_attr_BANKCON7.attr,
+	NULL
+};
+
+static struct attribute_group neo1973_memconfig_attr_group = {
+	.name	= NULL,
+	.attrs	= neo1973_memconfig_sysfs_entries,
+};
+
+static int __init neo1973_memconfig_probe(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "starting\n");
+
+	switch (machine_arch_type) {
+#ifdef CONFIG_MACH_NEO1973_GTA01
+	case MACH_TYPE_NEO1973_GTA01:
+		return -EINVAL;
+#endif /* CONFIG_MACH_NEO1973_GTA01 */
+	default:
+		break;
+	}
+
+	return sysfs_create_group(&pdev->dev.kobj,
+						 &neo1973_memconfig_attr_group);
+}
+
+static int neo1973_memconfig_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &neo1973_memconfig_attr_group);
+	return 0;
+}
+
+static struct platform_driver neo1973_memconfig_driver = {
+	.probe		= neo1973_memconfig_probe,
+	.remove		= neo1973_memconfig_remove,
+	.driver		= {
+		.name		= "neo1973-memconfig",
+	},
+};
+
+static int __devinit neo1973_memconfig_init(void)
+{
+	return platform_driver_register(&neo1973_memconfig_driver);
+}
+
+static void neo1973_memconfig_exit(void)
+{
+	platform_driver_unregister(&neo1973_memconfig_driver);
+}
+
+module_init(neo1973_memconfig_init);
+module_exit(neo1973_memconfig_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("neo1973 memconfig");
+
-- 
1.5.6.3