openwrt/target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts

/dts-v1/;

#include "mt7620n.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
	model = "Zbtlink ZBT-CPE102";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	aliases {
		led-boot = &led_4g_0;
		led-failsafe = &led_4g_0;
	};

	leds {
		compatible = "gpio-leds";

		led_4g_0: 4g-0 {
			label = "zbt-cpe102:green:4g-0";
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
		};

		4g-1 {
			label = "zbt-cpe102:green:4g-1";
			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
		};

		4g-2 {
			label = "zbt-cpe102:green:4g-2";
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&gpio1 {
	status = "okay";
};

&gpio2 {
	status = "okay";
};

&gpio3 {
	status = "okay";
};

&spi0 {
	status = "okay";

	en25q64@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0x760000>;
			};
		};
	};
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&ethernet {
	mtd-mac-address = <&factory 0x4>;
	mediatek,portmap = "wllll";
};

&wmac {
	ralink,mtd-eeprom = <&factory 0>;
};

&state_default {
	default {
		ralink,group = "i2c", "spi refclk", "wled";
		ralink,function = "gpio";
	};
};