openwrt/target/linux/omap35xx/patches-2.6.32/001-DSS2.patch

--- /dev/null
+++ b/Documentation/arm/OMAP/DSS
@@ -0,0 +1,317 @@
+OMAP2/3 Display Subsystem
+-------------------------
+
+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
+TV-out and multiple display support, but there are lots of small improvements
+also.
+
+The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
+currently side by side, you can choose which one to use.
+
+Features
+--------
+
+Working and tested features include:
+
+- MIPI DPI (parallel) output
+- MIPI DSI output in command mode
+- MIPI DBI (RFBI) output
+- SDI output
+- TV output
+- All pieces can be compiled as a module or inside kernel
+- Use DISPC to update any of the outputs
+- Use CPU to update RFBI or DSI output
+- OMAP DISPC planes
+- RGB16, RGB24 packed, RGB24 unpacked
+- YUV2, UYVY
+- Scaling
+- Adjusting DSS FCK to find a good pixel clock
+- Use DSI DPLL to create DSS FCK
+
+Tested boards include:
+- OMAP3 SDP board
+- Beagle board
+- N810
+
+omapdss driver
+--------------
+
+The DSS driver does not itself have any support for Linux framebuffer, V4L or
+such like the current ones, but it has an internal kernel API that upper level
+drivers can use.
+
+The DSS driver models OMAP's overlays, overlay managers and displays in a
+flexible way to enable non-common multi-display configuration. In addition to
+modelling the hardware overlays, omapdss supports virtual overlays and overlay
+managers. These can be used when updating a display with CPU or system DMA.
+
+Panel and controller drivers
+----------------------------
+
+The drivers implement panel or controller specific functionality and are not
+usually visible to users except through omapfb driver.  They register
+themselves to the DSS driver.
+
+omapfb driver
+-------------
+
+The omapfb driver implements arbitrary number of standard linux framebuffers.
+These framebuffers can be routed flexibly to any overlays, thus allowing very
+dynamic display architecture.
+
+The driver exports some omapfb specific ioctls, which are compatible with the
+ioctls in the old driver.
+
+The rest of the non standard features are exported via sysfs. Whether the final
+implementation will use sysfs, or ioctls, is still open.
+
+V4L2 drivers
+------------
+
+V4L2 is being implemented in TI.
+
+From omapdss point of view the V4L2 drivers should be similar to framebuffer
+driver.
+
+Architecture
+--------------------
+
+Some clarification what the different components do:
+
+    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
+      pixel data for the image. Framebuffer has width and height and color
+      depth.
+    - Overlay defines where the pixels are read from and where they go on the
+      screen. The overlay may be smaller than framebuffer, thus displaying only
+      part of the framebuffer. The position of the overlay may be changed if
+      the overlay is smaller than the display.
+    - Overlay manager combines the overlays in to one image and feeds them to
+      display.
+    - Display is the actual physical display device.
+
+A framebuffer can be connected to multiple overlays to show the same pixel data
+on all of the overlays. Note that in this case the overlay input sizes must be
+the same, but, in case of video overlays, the output size can be different. Any
+framebuffer can be connected to any overlay.
+
+An overlay can be connected to one overlay manager. Also DISPC overlays can be
+connected only to DISPC overlay managers, and virtual overlays can be only
+connected to virtual overlays.
+
+An overlay manager can be connected to one display. There are certain
+restrictions which kinds of displays an overlay manager can be connected:
+
+    - DISPC TV overlay manager can be only connected to TV display.
+    - Virtual overlay managers can only be connected to DBI or DSI displays.
+    - DISPC LCD overlay manager can be connected to all displays, except TV
+      display.
+
+Sysfs
+-----
+The sysfs interface is mainly used for testing. I don't think sysfs
+interface is the best for this in the final version, but I don't quite know
+what would be the best interfaces for these things.
+
+The sysfs interface is divided to two parts: DSS and FB.
+
+/sys/class/graphics/fb? directory:
+mirror		0=off, 1=on
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+rotate_type	0 = DMA rotation, 1 = VRFB rotation
+overlays	List of overlay numbers to which framebuffer pixels go
+phys_addr	Physical address of the framebuffer
+virt_addr	Virtual address of the framebuffer
+size		Size of the framebuffer
+
+/sys/devices/platform/omapdss/overlay? directory:
+enabled		0=off, 1=on
+input_size	width,height (ie. the framebuffer size)
+manager		Destination overlay manager name
+name
+output_size	width,height
+position	x,y
+screen_width	width
+global_alpha   	global alpha 0-255 0=transparent 255=opaque
+
+/sys/devices/platform/omapdss/manager? directory:
+display				Destination display
+name
+alpha_blending_enabled		0=off, 1=on
+trans_key_enabled		0=off, 1=on
+trans_key_type			gfx-destination, video-source
+trans_key_value			transparency color key (RGB24)
+default_color			default background color (RGB24)
+
+/sys/devices/platform/omapdss/display? directory:
+ctrl_name	Controller name
+mirror		0=off, 1=on
+update_mode	0=off, 1=auto, 2=manual
+enabled		0=off, 1=on
+name
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
+		When writing, two special timings are accepted for tv-out:
+		"pal" and "ntsc"
+panel_name
+tear_elim	Tearing elimination 0=off, 1=on
+
+There are also some debugfs files at <debugfs>/omapdss/ which show information
+about clocks and registers.
+
+Examples
+--------
+
+The following definitions have been made for the examples below:
+
+ovl0=/sys/devices/platform/omapdss/overlay0
+ovl1=/sys/devices/platform/omapdss/overlay1
+ovl2=/sys/devices/platform/omapdss/overlay2
+
+mgr0=/sys/devices/platform/omapdss/manager0
+mgr1=/sys/devices/platform/omapdss/manager1
+
+lcd=/sys/devices/platform/omapdss/display0
+dvi=/sys/devices/platform/omapdss/display1
+tv=/sys/devices/platform/omapdss/display2
+
+fb0=/sys/class/graphics/fb0
+fb1=/sys/class/graphics/fb1
+fb2=/sys/class/graphics/fb2
+
+Default setup on OMAP3 SDP
+--------------------------
+
+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
+and TV-out are not in use. The columns from left to right are:
+framebuffers, overlays, overlay managers, displays. Framebuffers are
+handled by omapfb, and the rest by the DSS.
+
+FB0 --- GFX  -\            DVI
+FB1 --- VID1 --+- LCD ---- LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Switch from LCD to DVI
+----------------------
+
+w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $lcd/enabled
+echo "" > $mgr0/display
+fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+# at this point you have to switch the dvi/lcd dip-switch from the omap board
+echo "dvi" > $mgr0/display
+echo "1" > $dvi/enabled
+
+After this the configuration looks like:
+
+FB0 --- GFX  -\         -- DVI
+FB1 --- VID1 --+- LCD -/   LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Clone GFX overlay to LCD and TV
+-------------------------------
+
+w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $ovl0/enabled
+echo "0" > $ovl1/enabled
+
+echo "" > $fb1/overlays
+echo "0,1" > $fb0/overlays
+
+echo "$w,$h" > $ovl1/output_size
+echo "tv" > $ovl1/manager
+
+echo "1" > $ovl0/enabled
+echo "1" > $ovl1/enabled
+
+echo "1" > $tv/enabled
+
+After this the configuration looks like (only relevant parts shown):
+
+FB0 +-- GFX  ---- LCD ---- LCD
+     \- VID1 ---- TV  ---- TV
+
+Misc notes
+----------
+
+OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+
+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
+
+Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
+does not support mirroring.
+
+VRFB rotation requires much more memory than non-rotated framebuffer, so you
+probably need to increase your vram setting before using VRFB rotation. Also,
+many applications may not work with VRFB if they do not pay attention to all
+framebuffer parameters.
+
+Kernel boot arguments
+---------------------
+
+vram=<size>
+	- Amount of total VRAM to preallocate. For example, "10M". omapfb
+	  allocates memory for framebuffers from VRAM.
+
+omapfb.mode=<display>:<mode>[,...]
+	- Default video mode for specified displays. For example,
+	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
+	  There are also two special modes: "pal" and "ntsc" that
+	  can be used to tv out.
+
+omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
+	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
+	  depending on the display size. With this you can manually allocate
+	  more or define the physical address of each framebuffer. For example,
+	  "1:4M" to allocate 4M for fb1.
+
+omapfb.debug=<y|n>
+	- Enable debug printing. You have to have OMAPFB debug support enabled
+	  in kernel config.
+
+omapfb.test=<y|n>
+	- Draw test pattern to framebuffer whenever framebuffer settings change.
+	  You need to have OMAPFB debug support enabled in kernel config.
+
+omapfb.vrfb=<y|n>
+	- Use VRFB rotation for all framebuffers.
+
+omapfb.rotate=<angle>
+	- Default rotation applied to all framebuffers.
+	  0 - 0 degree rotation
+	  1 - 90 degree rotation
+	  2 - 180 degree rotation
+	  3 - 270 degree rotation
+
+omapfb.mirror=<y|n>
+	- Default mirror for all framebuffers. Only works with DMA rotation.
+
+omapdss.def_disp=<display>
+	- Name of default display, to which all overlays will be connected.
+	  Common examples are "lcd" or "tv".
+
+omapdss.debug=<y|n>
+	- Enable debug printing. You have to have DSS debug support enabled in
+	  kernel config.
+
+TODO
+----
+
+DSS locking
+
+Error checking
+- Lots of checks are missing or implemented just as BUG()
+
+System DMA update for DSI
+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
+  to skip the empty byte?)
+
+OMAP1 support
+- Not sure if needed
+
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3848,6 +3848,23 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
+OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap2/dss/
+F:	drivers/video/omap2/vrfb.c
+F:	drivers/video/omap2/vram.c
+F:	Documentation/arm/OMAP/DSS
+
+OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
+M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap2/omapfb/
+
 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1336,10 +1336,33 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_LCD_VGA is not set
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+CONFIG_PANEL_SHARP_LS037V7DW01=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -32,7 +33,6 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/dsp_common.h>
-#include <mach/omapfb.h>
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,6 +37,7 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
+#include <mach/display.h>
 
 #include <mach/control.h>
 #include <mach/gpmc-smc91x.h>
@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi
 	},
 };
 
-static struct platform_device sdp3430_lcd_device = {
-	.name		= "sdp2430_lcd",
-	.id		= -1,
+
+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
+#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
+
+static unsigned backlight_gpio;
+static unsigned enable_gpio;
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init sdp3430_display_init(void)
+{
+	int r;
+
+	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
+	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
+
+	r = gpio_request(enable_gpio, "LCD reset");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD reset GPIO\n");
+		goto err0;
+	}
+
+	r = gpio_request(backlight_gpio, "LCD Backlight");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
+		goto err1;
+	}
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+
+	return;
+err1:
+	gpio_free(enable_gpio);
+err0:
+	return;
+}
+
+static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_direction_output(enable_gpio, 1);
+	gpio_direction_output(backlight_gpio, 1);
+
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	lcd_enabled = 0;
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+}
+
+static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct omap_dss_device sdp3430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "sharp_ls_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.platform_enable	= sdp3430_panel_enable_lcd,
+	.platform_disable	= sdp3430_panel_disable_lcd,
+};
+
+static struct omap_dss_device sdp3430_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= sdp3430_panel_enable_dvi,
+	.platform_disable	= sdp3430_panel_disable_dvi,
+};
+
+static struct omap_dss_device sdp3430_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= sdp3430_panel_enable_tv,
+	.platform_disable	= sdp3430_panel_disable_tv,
+};
+
+
+static struct omap_dss_device *sdp3430_dss_devices[] = {
+	&sdp3430_lcd_device,
+	&sdp3430_dvi_device,
+	&sdp3430_tv_device,
 };
 
-static struct regulator_consumer_supply sdp3430_vdac_supply = {
-	.supply		= "vdac",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct omap_dss_board_info sdp3430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
+	.devices	= sdp3430_dss_devices,
+	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct regulator_consumer_supply sdp3430_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct platform_device sdp3430_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &sdp3430_dss_data,
+	},
 };
 
-static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_lcd_device,
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &sdp3430_dss_device.dev,
 };
 
-static struct omap_lcd_config sdp3430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct platform_device *sdp3430_devices[] __initdata = {
+	&sdp3430_dss_device,
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
 static void __init omap_3430sdp_init_irq(void)
@@ -392,22 +514,34 @@ static struct regulator_init_data sdp343
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdac_supply,
+	.consumer_supplies	= &sdp3430_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
+	{
+		.supply		= "vdvi",
+		.dev		= &sdp3430_lcd_device.dev,
+	},
+	{
+		.supply		= "vdds_dsi",
+		.dev		= &sdp3430_dss_device.dev,
+	}
+};
+
 static struct regulator_init_data sdp3430_vpll2 = {
 	.constraints = {
 		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
+		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
+	.consumer_supplies	= sdp3430_vpll2_supplies,
 };
 
 static struct twl4030_platform_data sdp3430_twldata = {
@@ -499,6 +633,7 @@ static void __init omap_3430sdp_init(voi
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	sdp3430_display_init();
 	enable_board_wakeup_source();
 }
 
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -116,10 +116,10 @@ static struct omap_clk omap24xx_clks[] =
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -236,13 +236,13 @@ static struct omap_clk omap34xx_clks[] =
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
-	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
-	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
+	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -22,17 +22,18 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <mach/sram.h>
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 #include <mach/serial.h>
+#include <mach/vram.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
@@ -246,6 +247,7 @@ void __init omap2_map_common_io(void)
 	omap2_check_revision();
 	omap_sram_init();
 	omapfb_reserve_sdram();
+	omap_vram_reserve_sdram();
 }
 
 /*
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -133,3 +133,19 @@ void __init omap2_sdrc_init(struct omap_
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
 }
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_CONTROL(ctx));
+}
+
+void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_SIZE(ctx));
+}
+
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
+}
+
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
 #include <mach/board.h>
 #include <mach/sram.h>
-#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -327,7 +327,33 @@ static inline int omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-#else
+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct omapfb_platform_data omapfb_config;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+	omapfb_config = *data;
+}
+
+static inline int omap_init_fb(void)
+{
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
 
 void omapfb_reserve_sdram(void) {}
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
@@ -339,5 +365,16 @@ unsigned long omapfb_reserve_sram(unsign
 	return 0;
 }
 
+#else
+
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+				  unsigned long sram_vstart,
+				  unsigned long sram_size,
+				  unsigned long start_avail,
+				  unsigned long size_avail)
+{
+	return 0;
+}
 
 #endif
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/display.h
@@ -0,0 +1,540 @@
+/*
+ * linux/include/asm-arm/arch-omap/display.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARCH_OMAP_DISPLAY_H
+#define __ASM_ARCH_OMAP_DISPLAY_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
+#define DISPC_IRQ_VSYNC			(1 << 1)
+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
+#define DISPC_IRQ_OCP_ERR		(1 << 9)
+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
+#define DISPC_IRQ_WAKEUP		(1 << 16)
+
+struct omap_dss_device;
+struct omap_overlay_manager;
+
+enum omap_display_type {
+	OMAP_DISPLAY_TYPE_NONE		= 0,
+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+};
+
+enum omap_plane {
+	OMAP_DSS_GFX	= 0,
+	OMAP_DSS_VIDEO1	= 1,
+	OMAP_DSS_VIDEO2	= 2
+};
+
+enum omap_channel {
+	OMAP_DSS_CHANNEL_LCD	= 0,
+	OMAP_DSS_CHANNEL_DIGIT	= 1,
+};
+
+enum omap_color_mode {
+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
+
+	OMAP_DSS_COLOR_GFX_OMAP3 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+
+	OMAP_DSS_COLOR_VID_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
+		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
+};
+
+enum omap_lcd_display_type {
+	OMAP_DSS_LCD_DISPLAY_STN,
+	OMAP_DSS_LCD_DISPLAY_TFT,
+};
+
+enum omap_dss_load_mode {
+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
+};
+
+enum omap_dss_trans_key_type {
+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
+};
+
+enum omap_rfbi_te_mode {
+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
+};
+
+enum omap_panel_config {
+	OMAP_DSS_LCD_IVS		= 1<<0,
+	OMAP_DSS_LCD_IHS		= 1<<1,
+	OMAP_DSS_LCD_IPC		= 1<<2,
+	OMAP_DSS_LCD_IEO		= 1<<3,
+	OMAP_DSS_LCD_RF			= 1<<4,
+	OMAP_DSS_LCD_ONOFF		= 1<<5,
+
+	OMAP_DSS_LCD_TFT		= 1<<20,
+};
+
+enum omap_dss_venc_type {
+	OMAP_DSS_VENC_TYPE_COMPOSITE,
+	OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+enum omap_display_caps {
+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0,
+};
+
+enum omap_dss_update_mode {
+	OMAP_DSS_UPDATE_DISABLED = 0,
+	OMAP_DSS_UPDATE_AUTO,
+	OMAP_DSS_UPDATE_MANUAL,
+};
+
+enum omap_dss_display_state {
+	OMAP_DSS_DISPLAY_DISABLED = 0,
+	OMAP_DSS_DISPLAY_ACTIVE,
+	OMAP_DSS_DISPLAY_SUSPENDED,
+};
+
+/* XXX perhaps this should be removed */
+enum omap_dss_overlay_managers {
+	OMAP_DSS_OVL_MGR_LCD,
+	OMAP_DSS_OVL_MGR_TV,
+};
+
+enum omap_dss_rotation_type {
+	OMAP_DSS_ROT_DMA = 0,
+	OMAP_DSS_ROT_VRFB = 1,
+};
+
+enum omap_overlay_caps {
+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
+	OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
+};
+
+enum omap_overlay_manager_caps {
+	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
+};
+
+/* RFBI */
+
+struct rfbi_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];             /* set by rfbi_convert_timings() */
+
+	int converted;
+};
+
+void omap_rfbi_write_command(const void *buf, u32 len);
+void omap_rfbi_read_data(void *buf, u32 len);
+void omap_rfbi_write_data(const void *buf, u32 len);
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h);
+int omap_rfbi_enable_te(bool enable, unsigned line);
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
+
+/* DSI */
+void dsi_bus_lock(void);
+void dsi_bus_unlock(void);
+int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
+int dsi_vc_send_null(int channel);
+int dsi_vc_send_bta_sync(int channel);
+
+/* Board specific data */
+struct omap_dss_board_info {
+	int (*get_last_off_on_transaction_id)(struct device *dev);
+	int num_devices;
+	struct omap_dss_device **devices;
+	struct omap_dss_device *default_device;
+};
+
+struct omap_video_timings {
+	/* Unit: pixels */
+	u16 x_res;
+	/* Unit: pixels */
+	u16 y_res;
+	/* Unit: KHz */
+	u32 pixel_clock;
+	/* Unit: pixel clocks */
+	u16 hsw;	/* Horizontal synchronization pulse width */
+	/* Unit: pixel clocks */
+	u16 hfp;	/* Horizontal front porch */
+	/* Unit: pixel clocks */
+	u16 hbp;	/* Horizontal back porch */
+	/* Unit: line clocks */
+	u16 vsw;	/* Vertical synchronization pulse width */
+	/* Unit: line clocks */
+	u16 vfp;	/* Vertical front porch */
+	/* Unit: line clocks */
+	u16 vbp;	/* Vertical back porch */
+};
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+/* Hardcoded timings for tv modes. Venc only uses these to
+ * identify the mode, and does not actually use the configs
+ * itself. However, the configs should be something that
+ * a normal monitor can also show */
+const extern struct omap_video_timings omap_dss_pal_timings;
+const extern struct omap_video_timings omap_dss_ntsc_timings;
+#endif
+
+struct omap_overlay_info {
+	bool enabled;
+
+	u32 paddr;
+	void __iomem *vaddr;
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+};
+
+struct omap_overlay {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_color_mode supported_modes;
+	enum omap_overlay_caps caps;
+
+	/* dynamic fields */
+	struct omap_overlay_manager *manager;
+	struct omap_overlay_info info;
+
+	/* if true, info has been changed, but not applied() yet */
+	bool info_dirty;
+
+	int (*set_manager)(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr);
+	int (*unset_manager)(struct omap_overlay *ovl);
+
+	int (*set_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+	void (*get_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+
+	int (*wait_for_go)(struct omap_overlay *ovl);
+};
+
+struct omap_overlay_manager_info {
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool alpha_enabled;
+};
+
+struct omap_overlay_manager {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_overlay_manager_caps caps;
+	int num_overlays;
+	struct omap_overlay **overlays;
+	enum omap_display_type supported_displays;
+
+	/* dynamic fields */
+	struct omap_dss_device *device;
+	struct omap_overlay_manager_info info;
+
+	bool device_changed;
+	/* if true, info has been changed but not applied() yet */
+	bool info_dirty;
+
+	int (*set_device)(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev);
+	int (*unset_device)(struct omap_overlay_manager *mgr);
+
+	int (*set_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+	void (*get_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+
+	int (*apply)(struct omap_overlay_manager *mgr);
+	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+};
+
+struct omap_dss_device {
+	struct device dev;
+
+	enum omap_display_type type;
+
+	union {
+		struct {
+			u8 data_lines;
+		} dpi;
+
+		struct {
+			u8 channel;
+			u8 data_lines;
+		} rfbi;
+
+		struct {
+			u8 datapairs;
+		} sdi;
+
+		struct {
+			u8 clk_lane;
+			u8 clk_pol;
+			u8 data1_lane;
+			u8 data1_pol;
+			u8 data2_lane;
+			u8 data2_pol;
+			unsigned long lp_clk_hz;
+			unsigned long ddr_clk_hz;
+
+			bool ext_te;
+			u8 ext_te_gpio;
+		} dsi;
+
+		struct {
+			enum omap_dss_venc_type type;
+			bool invert_polarity;
+		} venc;
+	} phy;
+
+	struct {
+		struct omap_video_timings timings;
+
+		int acbi;	/* ac-bias pin transitions per interrupt */
+		/* Unit: line clocks */
+		int acb;	/* ac-bias pin frequency */
+
+		enum omap_panel_config config;
+
+		u8 recommended_bpp;
+
+		struct omap_dss_device *ctrl;
+	} panel;
+
+	struct {
+		u8 pixel_size;
+		struct rfbi_timings rfbi_timings;
+		struct omap_dss_device *panel;
+	} ctrl;
+
+	int reset_gpio;
+
+	int max_backlight_level;
+
+	const char *name;
+
+	/* used to match device to driver */
+	const char *driver_name;
+
+	void *data;
+
+	struct omap_dss_driver *driver;
+
+	/* helper variable for driver suspend/resume */
+	bool activate_after_resume;
+
+	enum omap_display_caps caps;
+
+	struct omap_overlay_manager *manager;
+
+	enum omap_dss_display_state state;
+
+	int (*enable)(struct omap_dss_device *dssdev);
+	void (*disable)(struct omap_dss_device *dssdev);
+
+	int (*suspend)(struct omap_dss_device *dssdev);
+	int (*resume)(struct omap_dss_device *dssdev);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
+	int (*wait_vsync)(struct omap_dss_device *dssdev);
+
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)
+		(struct omap_dss_device *dssdev);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*get_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*run_test)(struct omap_dss_device *dssdev, int test);
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+	/* platform specific  */
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+struct omap_dss_driver {
+	struct device_driver driver;
+
+	int (*probe)(struct omap_dss_device *);
+	void (*remove)(struct omap_dss_device *);
+
+	int (*enable)(struct omap_dss_device *display);
+	void (*disable)(struct omap_dss_device *display);
+	int (*suspend)(struct omap_dss_device *display);
+	int (*resume)(struct omap_dss_device *display);
+	int (*run_test)(struct omap_dss_device *display, int test);
+
+	void (*setup_update)(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*wait_for_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+};
+
+int omap_dss_register_driver(struct omap_dss_driver *);
+void omap_dss_unregister_driver(struct omap_dss_driver *);
+
+int omap_dss_register_device(struct omap_dss_device *);
+void omap_dss_unregister_device(struct omap_dss_device *);
+
+void omap_dss_get_device(struct omap_dss_device *dssdev);
+void omap_dss_put_device(struct omap_dss_device *dssdev);
+#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data));
+
+int omap_dss_start_device(struct omap_dss_device *dssdev);
+void omap_dss_stop_device(struct omap_dss_device *dssdev);
+
+int omap_dss_get_num_overlay_managers(void);
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
+
+int omap_dss_get_num_overlays(void);
+struct omap_overlay *omap_dss_get_overlay(int num);
+
+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
+#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+
+#endif
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * File: arch/arm/plat-omap/include/mach/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <mach/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*set_rotate)	  (int angle);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_reserve_sdram(void);
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -88,7 +88,10 @@
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
-#define SMS_SYSCONFIG		0x010
+#define SMS_SYSCONFIG			0x010
+#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
 /* REVISIT: fill in other SMS registers here */
 
 
@@ -121,6 +124,10 @@ int omap2_sdrc_get_params(unsigned long 
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
 
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
+
 #ifdef CONFIG_ARCH_OMAP2
 
 struct memory_timings {
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vram.h
@@ -0,0 +1,63 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+
+#define OMAP_VRAM_MEMTYPE_SDRAM		0
+#define OMAP_VRAM_MEMTYPE_SRAM		1
+#define OMAP_VRAM_MEMTYPE_MAX		1
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+		unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+extern void omap_vram_set_sram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram(void);
+extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram(void) { }
+static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail)
+{
+	return 0;
+}
+#endif
+
+#endif
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vrfb.h
@@ -0,0 +1,46 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+	u8 context;
+	void __iomem *vaddr[4];
+	unsigned long paddr[4];
+	u16 xoffset;
+	u16 yoffset;
+	u8 bytespp;
+};
+
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_suspend_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_resume_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height,
+		unsigned bytespp, bool yuv_mode);
+extern void omap_vrfb_restore_context(void);
+
+#endif /* __VRFB_H */
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -28,6 +28,7 @@
 #include <mach/sram.h>
 #include <mach/board.h>
 #include <mach/cpu.h>
+#include <mach/vram.h>
 
 #include <mach/control.h>
 
@@ -185,6 +186,13 @@ void __init omap_detect_sram(void)
 				       omap_sram_start + SRAM_BOOTLOADER_SZ,
 				       omap_sram_size - SRAM_BOOTLOADER_SZ);
 	omap_sram_size -= reserved;
+
+	reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
+			omap_sram_size,
+			omap_sram_start + SRAM_BOOTLOADER_SZ,
+			omap_sram_size - SRAM_BOOTLOADER_SZ);
+	omap_sram_size -= reserved;
+
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2161,6 +2161,7 @@ config FB_BROADSHEET
 	  a bridge adapter.
 
 source "drivers/video/omap/Kconfig"
+source "drivers/video/omap2/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
 source "drivers/video/display/Kconfig"
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501)            += sm5
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
+obj-y                             += omap2/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,6 +1,7 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
-	depends on FB && ARCH_OMAP
+	depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
+
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_BOOTLOADER_INIT
 	bool "Check bootloader initialization"
-	depends on FB_OMAP
+	depends on FB_OMAP || FB_OMAP2
 	help
 	  Say Y here if you want to enable checking if the bootloader has
 	  already initialized the display controller. In this case the
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -27,9 +27,9 @@
 #include <linux/clk.h>
 
 #include <mach/dma.h>
-#include <mach/omapfb.h>
 #include <mach/blizzard.h>
 
+#include "omapfb.h"
 #include "dispc.h"
 
 #define MODULE_NAME				"blizzard"
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -24,11 +24,12 @@
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <mach/sram.h>
-#include <mach/omapfb.h>
 #include <mach/board.h>
 
+#include "omapfb.h"
 #include "dispc.h"
 
 #define MODULE_NAME			"dispc"
@@ -188,6 +189,11 @@ static struct {
 	struct omapfb_color_key	color_key;
 } dispc;
 
+static struct platform_device omapdss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+};
+
 static void enable_lcd_clocks(int enable);
 
 static void inline dispc_write_reg(int idx, u32 val)
@@ -907,20 +913,20 @@ static irqreturn_t omap_dispc_irq_handle
 
 static int get_dss_clocks(void)
 {
-	dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
+	dispc.dss_ick = clk_get(&omapdss_device.dev, "ick");
 	if (IS_ERR(dispc.dss_ick)) {
 		dev_err(dispc.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(dispc.dss_ick);
 	}
 
-	dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
+	dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck");
 	if (IS_ERR(dispc.dss1_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(dispc.dss_ick);
 		return PTR_ERR(dispc.dss1_fck);
 	}
 
-	dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
+	dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck");
 	if (IS_ERR(dispc.dss_54m_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
 		clk_put(dispc.dss_ick);
@@ -1371,6 +1377,12 @@ static int omap_dispc_init(struct omapfb
 	int skip_init = 0;
 	int i;
 
+	r = platform_device_register(&omapdss_device);
+	if (r) {
+		dev_err(fbdev->dev, "can't register omapdss device\n");
+		return r;
+	}
+
 	memset(&dispc, 0, sizeof(dispc));
 
 	dispc.base = ioremap(DISPC_BASE, SZ_1K);
@@ -1508,6 +1520,7 @@ static void omap_dispc_cleanup(void)
 	free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
 	put_dss_clocks();
 	iounmap(dispc.base);
+	platform_device_unregister(&omapdss_device);
 }
 
 const struct lcd_ctrl omap2_int_ctrl = {
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -27,8 +27,8 @@
 #include <linux/clk.h>
 
 #include <mach/dma.h>
-#include <mach/omapfb.h>
 #include <mach/hwa742.h>
+#include "omapfb.h"
 
 #define HWA742_REV_CODE_REG       0x0
 #define HWA742_CONFIG_REG         0x2
--- a/drivers/video/omap/lcd_2430sdp.c
+++ b/drivers/video/omap/lcd_2430sdp.c
@@ -28,9 +28,10 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
 #define SDP2430_LCD_PANEL_ENABLE_GPIO		154
 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	24
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -27,7 +27,8 @@
 
 #include <mach/board-ams-delta.h>
 #include <mach/hardware.h>
-#include <mach/omapfb.h>
+
+#include "omapfb.h"
 
 #define AMS_DELTA_DEFAULT_CONTRAST	112
 
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -26,7 +26,8 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
-#include <mach/omapfb.h>
+
+#include "omapfb.h"
 
 /* #define USE_35INCH_LCD 1 */
 
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -24,7 +24,7 @@
 #include <linux/i2c/tps65010.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 
 #include <mach/fpga.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -28,9 +28,10 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define LCD_PANEL_BACKLIGHT_GPIO	(15 + OMAP_MAX_GPIO_LINES)
 #define LCD_PANEL_ENABLE_GPIO		(7 + OMAP_MAX_GPIO_LINES)
 
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -23,9 +23,10 @@
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 
-#include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
 
+#include "omapfb.h"
+
 #define MIPID_MODULE_NAME		"lcd_mipid"
 
 #define MIPID_CMD_READ_DISP_ID		0x04
--- a/drivers/video/omap/lcd_omap2evm.c
+++ b/drivers/video/omap/lcd_omap2evm.c
@@ -27,9 +27,10 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define LCD_PANEL_ENABLE_GPIO	154
 #define LCD_PANEL_LR		128
 #define LCD_PANEL_UD		129
--- a/drivers/video/omap/lcd_omap3beagle.c
+++ b/drivers/video/omap/lcd_omap3beagle.c
@@ -26,9 +26,10 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define LCD_PANEL_ENABLE_GPIO       170
 
 static int omap3beagle_panel_init(struct lcd_panel *panel,
--- a/drivers/video/omap/lcd_omap3evm.c
+++ b/drivers/video/omap/lcd_omap3evm.c
@@ -26,9 +26,10 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define LCD_PANEL_ENABLE_GPIO       153
 #define LCD_PANEL_LR                2
 #define LCD_PANEL_UD                3
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -25,7 +25,7 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -25,9 +25,10 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
-#include <mach/omapfb.h>
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #define LCD_ENABLE       144
 
 static int overo_panel_init(struct lcd_panel *panel,
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 
 #include <mach/fpga.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int palmte_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -30,7 +30,7 @@ GPIO13 - screen blanking
 #include <linux/io.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int palmtt_panel_init(struct lcd_panel *panel,
 	struct omapfb_device *fbdev)
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/omapfb.h>
+#include "omapfb.h"
 
 static int palmz71_panel_init(struct lcd_panel *panel,
 			      struct omapfb_device *fbdev)
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -30,10 +30,11 @@
 #include <linux/clk.h>
 
 #include <mach/dma.h>
-#include <mach/omapfb.h>
 
 #include <asm/mach-types.h>
 
+#include "omapfb.h"
+
 #include "lcdc.h"
 
 #define MODULE_NAME			"lcdc"
--- /dev/null
+++ b/drivers/video/omap/omapfb.h
@@ -0,0 +1,227 @@
+/*
+ * File: drivers/video/omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/omapfb.h>
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void *data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED		= 0,
+	OMAPFB_SUSPENDED	= 99,
+	OMAPFB_ACTIVE		= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;		/* Using external
+							   LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	const struct lcd_ctrl	*ctrl;			/* LCD controller */
+	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+				       struct omapfb_update_window *win,
+				       void (*callback)(void *),
+				       void *callback_data);
+
+#endif /* __OMAPFB_H */
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -29,8 +29,8 @@
 #include <linux/uaccess.h>
 
 #include <mach/dma.h>
-#include <mach/omapfb.h>
 
+#include "omapfb.h"
 #include "lcdc.h"
 #include "dispc.h"
 
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,8 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/omapfb.h>
-
+#include "omapfb.h"
 #include "dispc.h"
 
 /* To work around an RFBI transfer rate limitation */
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -25,8 +25,8 @@
 #include <linux/io.h>
 
 #include <mach/dma.h>
-#include <mach/omapfb.h>
 
+#include "omapfb.h"
 #include "lcdc.h"
 
 #define MODULE_NAME		"omapfb-sossi"
--- /dev/null
+++ b/drivers/video/omap2/Kconfig
@@ -0,0 +1,9 @@
+config OMAP2_VRAM
+	bool
+
+config OMAP2_VRFB
+	bool
+
+source "drivers/video/omap2/dss/Kconfig"
+source "drivers/video/omap2/omapfb/Kconfig"
+source "drivers/video/omap2/displays/Kconfig"
--- /dev/null
+++ b/drivers/video/omap2/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_OMAP2_VRAM) += vram.o
+obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
+
+obj-y += dss/
+obj-y += omapfb/
+obj-y += displays/
--- /dev/null
+++ b/drivers/video/omap2/displays/Kconfig
@@ -0,0 +1,28 @@
+menu "OMAP2/3 Display Device Drivers"
+        depends on OMAP2_DSS
+
+config PANEL_GENERIC
+        tristate "Generic Panel"
+        help
+	  Generic panel driver.
+	  Used for DVI output for Beagle and OMAP3 SDP.
+
+config PANEL_SAMSUNG_LTE430WQ_F0C
+        tristate "Samsung LTE430WQ-F0C LCD Panel"
+        depends on OMAP2_DSS
+        help
+          LCD Panel used on Overo Palo43
+
+config PANEL_SHARP_LS037V7DW01
+        tristate "Sharp LS037V7DW01 LCD Panel"
+        depends on OMAP2_DSS
+        help
+          LCD Panel used in TI's SDP3430 and EVM boards
+
+config PANEL_TAAL
+        tristate "Taal DSI Panel"
+        depends on OMAP2_DSS_DSI
+        help
+          Taal DSI command mode panel from TPO.
+
+endmenu
--- /dev/null
+++ b/drivers/video/omap2/displays/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
+obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
+obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+
+obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-generic.c
@@ -0,0 +1,104 @@
+/*
+ * Generic panel support
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <mach/display.h>
+
+static struct omap_video_timings generic_panel_timings = {
+	/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
+	.x_res		= 640,
+	.y_res		= 480,
+	.pixel_clock	= 23500,
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+};
+
+static int generic_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.config = OMAP_DSS_LCD_TFT;
+	dssdev->panel.timings = generic_panel_timings;
+
+	return 0;
+}
+
+static void generic_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int generic_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	if (dssdev->platform_enable)
+		r = dssdev->platform_enable(dssdev);
+
+	return r;
+}
+
+static void generic_panel_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+}
+
+static int generic_panel_suspend(struct omap_dss_device *dssdev)
+{
+	generic_panel_disable(dssdev);
+	return 0;
+}
+
+static int generic_panel_resume(struct omap_dss_device *dssdev)
+{
+	return generic_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver generic_driver = {
+	.probe		= generic_panel_probe,
+	.remove		= generic_panel_remove,
+
+	.enable		= generic_panel_enable,
+	.disable	= generic_panel_disable,
+	.suspend	= generic_panel_suspend,
+	.resume		= generic_panel_resume,
+
+	.driver         = {
+		.name   = "generic_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init generic_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&generic_driver);
+}
+
+static void __exit generic_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&generic_driver);
+}
+
+module_init(generic_panel_drv_init);
+module_exit(generic_panel_drv_exit);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
@@ -0,0 +1,113 @@
+/*
+ * LCD panel driver for Samsung LTE430WQ-F0C
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <mach/display.h>
+
+static struct omap_video_timings samsung_lte_timings = {
+	.x_res = 480,
+	.y_res = 272,
+
+	.pixel_clock	= 9200,
+
+	.hsw		= 41,
+	.hfp		= 8,
+	.hbp		= 45-41,
+
+	.vsw		= 10,
+	.vfp		= 4,
+	.vbp		= 12-10,
+};
+
+static int samsung_lte_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+		OMAP_DSS_LCD_IHS;
+	dssdev->panel.timings = samsung_lte_timings;
+
+	return 0;
+}
+
+static void samsung_lte_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int samsung_lte_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (dssdev->platform_enable)
+		r = dssdev->platform_enable(dssdev);
+
+	return r;
+}
+
+static void samsung_lte_panel_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+}
+
+static int samsung_lte_panel_suspend(struct omap_dss_device *dssdev)
+{
+	samsung_lte_panel_disable(dssdev);
+	return 0;
+}
+
+static int samsung_lte_panel_resume(struct omap_dss_device *dssdev)
+{
+	return samsung_lte_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver samsung_lte_driver = {
+	.probe		= samsung_lte_panel_probe,
+	.remove		= samsung_lte_panel_remove,
+
+	.enable		= samsung_lte_panel_enable,
+	.disable	= samsung_lte_panel_disable,
+	.suspend	= samsung_lte_panel_suspend,
+	.resume		= samsung_lte_panel_resume,
+
+	.driver         = {
+		.name   = "samsung_lte_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init samsung_lte_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&samsung_lte_driver);
+}
+
+static void __exit samsung_lte_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&samsung_lte_driver);
+}
+
+module_init(samsung_lte_panel_drv_init);
+module_exit(samsung_lte_panel_drv_exit);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -0,0 +1,153 @@
+/*
+ * LCD panel driver for Sharp LS037V7DW01
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+#include <mach/display.h>
+
+struct sharp_data {
+	/* XXX This regulator should actually be in SDP board file, not here,
+	 * as it doesn't actually power the LCD, but something else that
+	 * affects the output to LCD (I think. Somebody clarify). It doesn't do
+	 * harm here, as SDP is the only board using this currently */
+	struct regulator *vdvi_reg;
+};
+
+static struct omap_video_timings sharp_ls_timings = {
+	.x_res = 480,
+	.y_res = 640,
+
+	.pixel_clock	= 19200,
+
+	.hsw		= 2,
+	.hfp		= 1,
+	.hbp		= 28,
+
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 1,
+};
+
+static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
+{
+	struct sharp_data *sd;
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+		OMAP_DSS_LCD_IHS;
+	dssdev->panel.acb = 0x28;
+	dssdev->panel.timings = sharp_ls_timings;
+
+	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
+	if (!sd)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dssdev->dev, sd);
+
+	sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi");
+	if (IS_ERR(sd->vdvi_reg)) {
+		kfree(sd);
+		pr_err("failed to get VDVI regulator\n");
+		return PTR_ERR(sd->vdvi_reg);
+	}
+
+	return 0;
+}
+
+static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
+
+	regulator_put(sd->vdvi_reg);
+
+	kfree(sd);
+}
+
+static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+{
+	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
+	int r = 0;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	regulator_enable(sd->vdvi_reg);
+
+	if (dssdev->platform_enable)
+		r = dssdev->platform_enable(dssdev);
+
+	return r;
+}
+
+static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	regulator_disable(sd->vdvi_reg);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+}
+
+static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev)
+{
+	sharp_ls_panel_disable(dssdev);
+	return 0;
+}
+
+static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
+{
+	return sharp_ls_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver sharp_ls_driver = {
+	.probe		= sharp_ls_panel_probe,
+	.remove		= sharp_ls_panel_remove,
+
+	.enable		= sharp_ls_panel_enable,
+	.disable	= sharp_ls_panel_disable,
+	.suspend	= sharp_ls_panel_suspend,
+	.resume		= sharp_ls_panel_resume,
+
+	.driver         = {
+		.name   = "sharp_ls_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init sharp_ls_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&sharp_ls_driver);
+}
+
+static void __exit sharp_ls_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&sharp_ls_driver);
+}
+
+module_init(sharp_ls_panel_drv_init);
+module_exit(sharp_ls_panel_drv_exit);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -0,0 +1,900 @@
+/*
+ * Taal DSI command mode panel
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*#define DEBUG*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/completion.h>
+
+#include <mach/display.h>
+
+/* DSI Virtual channel. Hardcoded for now. */
+#define TCH 0
+
+#define DCS_READ_NUM_ERRORS	0x05
+#define DCS_READ_POWER_MODE	0x0a
+#define DCS_READ_MADCTL		0x0b
+#define DCS_READ_PIXEL_FORMAT	0x0c
+#define DCS_SLEEP_IN		0x10
+#define DCS_SLEEP_OUT		0x11
+#define DCS_DISPLAY_OFF		0x28
+#define DCS_DISPLAY_ON		0x29
+#define DCS_COLUMN_ADDR		0x2a
+#define DCS_PAGE_ADDR		0x2b
+#define DCS_MEMORY_WRITE	0x2c
+#define DCS_TEAR_OFF		0x34
+#define DCS_TEAR_ON		0x35
+#define DCS_MEM_ACC_CTRL	0x36
+#define DCS_PIXEL_FORMAT	0x3a
+#define DCS_BRIGHTNESS		0x51
+#define DCS_CTRL_DISPLAY	0x53
+#define DCS_WRITE_CABC		0x55
+#define DCS_READ_CABC		0x56
+#define DCS_GET_ID1		0xda
+#define DCS_GET_ID2		0xdb
+#define DCS_GET_ID3		0xdc
+
+struct taal_data {
+	struct backlight_device *bldev;
+
+	unsigned long	hw_guard_end;	/* next value of jiffies when we can
+					 * issue the next sleep in/out command
+					 */
+	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
+
+	struct omap_dss_device *dssdev;
+
+	bool enabled;
+	u8 rotate;
+	bool mirror;
+
+	bool te_enabled;
+	bool use_ext_te;
+	struct completion te_completion;
+
+	bool use_dsi_bl;
+
+	bool cabc_broken;
+	unsigned cabc_mode;
+
+	bool intro_printed;
+};
+
+static void hw_guard_start(struct taal_data *td, int guard_msec)
+{
+	td->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	td->hw_guard_end = jiffies + td->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct taal_data *td)
+{
+	unsigned long wait = td->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= td->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static int taal_dcs_read_1(u8 dcs_cmd, u8 *data)
+{
+	int r;
+	u8 buf[1];
+
+	r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1);
+
+	if (r < 0)
+		return r;
+
+	*data = buf[0];
+
+	return 0;
+}
+
+static int taal_dcs_write_0(u8 dcs_cmd)
+{
+	return dsi_vc_dcs_write(TCH, &dcs_cmd, 1);
+}
+
+static int taal_dcs_write_1(u8 dcs_cmd, u8 param)
+{
+	u8 buf[2];
+	buf[0] = dcs_cmd;
+	buf[1] = param;
+	return dsi_vc_dcs_write(TCH, buf, 2);
+}
+
+static int taal_sleep_in(struct taal_data *td)
+
+{
+	u8 cmd;
+	int r;
+
+	hw_guard_wait(td);
+
+	cmd = DCS_SLEEP_IN;
+	r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_sleep_out(struct taal_data *td)
+{
+	int r;
+
+	hw_guard_wait(td);
+
+	r = taal_dcs_write_0(DCS_SLEEP_OUT);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_get_id(u8 *id1, u8 *id2, u8 *id3)
+{
+	int r;
+
+	r = taal_dcs_read_1(DCS_GET_ID1, id1);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID2, id2);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID3, id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int taal_set_addr_mode(u8 rotate, bool mirror)
+{
+	int r;
+	u8 mode;
+	int b5, b6, b7;
+
+	r = taal_dcs_read_1(DCS_READ_MADCTL, &mode);
+	if (r)
+		return r;
+
+	switch (rotate) {
+	default:
+	case 0:
+		b7 = 0;
+		b6 = 0;
+		b5 = 0;
+		break;
+	case 1:
+		b7 = 0;
+		b6 = 1;
+		b5 = 1;
+		break;
+	case 2:
+		b7 = 1;
+		b6 = 1;
+		b5 = 0;
+		break;
+	case 3:
+		b7 = 1;
+		b6 = 0;
+		b5 = 1;
+		break;
+	}
+
+	if (mirror)
+		b6 = !b6;
+
+	mode &= ~((1<<7) | (1<<6) | (1<<5));
+	mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
+
+	return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode);
+}
+
+static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	u16 x1 = x;
+	u16 x2 = x + w - 1;
+	u16 y1 = y;
+	u16 y2 = y + h - 1;
+
+	u8 buf[5];
+	buf[0] = DCS_COLUMN_ADDR;
+	buf[1] = (x1 >> 8) & 0xff;
+	buf[2] = (x1 >> 0) & 0xff;
+	buf[3] = (x2 >> 8) & 0xff;
+	buf[4] = (x2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	buf[0] = DCS_PAGE_ADDR;
+	buf[1] = (y1 >> 8) & 0xff;
+	buf[2] = (y1 >> 0) & 0xff;
+	buf[3] = (y2 >> 8) & 0xff;
+	buf[4] = (y2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	dsi_vc_send_bta_sync(TCH);
+
+	return r;
+}
+
+static int taal_bl_update_status(struct backlight_device *dev)
+{
+	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+	int level;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
+
+	if (td->use_dsi_bl) {
+		if (td->enabled) {
+			dsi_bus_lock();
+			r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
+			dsi_bus_unlock();
+			if (r)
+				return r;
+		}
+	} else {
+		if (!dssdev->set_backlight)
+			return -EINVAL;
+
+		r = dssdev->set_backlight(dssdev, level);
+		if (r)
+			return r;
+	}
+
+	return 0;
+}
+
+static int taal_bl_get_intensity(struct backlight_device *dev)
+{
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		return dev->props.brightness;
+
+	return 0;
+}
+
+static struct backlight_ops taal_bl_ops = {
+	.get_brightness = taal_bl_get_intensity,
+	.update_status  = taal_bl_update_status,
+};
+
+static void taal_get_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static void taal_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (td->rotate == 0 || td->rotate == 2) {
+		*xres = dssdev->panel.timings.x_res;
+		*yres = dssdev->panel.timings.y_res;
+	} else {
+		*yres = dssdev->panel.timings.x_res;
+		*xres = dssdev->panel.timings.y_res;
+	}
+}
+
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	complete_all(&td->te_completion);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t taal_num_errors_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 errors;
+	int r;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
+		dsi_bus_unlock();
+	} else {
+		r = -ENODEV;
+	}
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+}
+
+static ssize_t taal_hw_revision_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		r = taal_get_id(&id1, &id2, &id3);
+		dsi_bus_unlock();
+	} else {
+		r = -ENODEV;
+	}
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static const char *cabc_modes[] = {
+	"off",		/* used also always when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	mode = td->cabc_mode;
+
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		if (sysfs_streq(cabc_modes[i], buf))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		if (!td->cabc_broken)
+			taal_dcs_write_1(DCS_WRITE_CABC, i);
+		dsi_bus_unlock();
+	}
+
+	td->cabc_mode = i;
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int len;
+	int i;
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL);
+static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL);
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *taal_attrs[] = {
+	&dev_attr_num_dsi_errors.attr,
+	&dev_attr_hw_revision.attr,
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group taal_attr_group = {
+	.attrs = taal_attrs,
+};
+
+static int taal_probe(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td;
+	struct backlight_device *bldev;
+	int r;
+
+	const struct omap_video_timings taal_panel_timings = {
+		.x_res		= 864,
+		.y_res		= 480,
+	};
+
+	dev_dbg(&dssdev->dev, "probe\n");
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT;
+	dssdev->panel.timings = taal_panel_timings;
+	dssdev->ctrl.pixel_size = 24;
+
+	td = kzalloc(sizeof(*td), GFP_KERNEL);
+	if (!td) {
+		r = -ENOMEM;
+		goto err0;
+	}
+
+	dev_set_drvdata(&dssdev->dev, td);
+
+	dssdev->get_timings = taal_get_timings;
+	dssdev->get_resolution = taal_get_resolution;
+
+	/* if no platform set_backlight() defined, presume DSI backlight
+	 * control */
+	if (!dssdev->set_backlight)
+		td->use_dsi_bl = true;
+
+	bldev = backlight_device_register("taal", &dssdev->dev, dssdev,
+			&taal_bl_ops);
+	if (IS_ERR(bldev)) {
+		r = PTR_ERR(bldev);
+		goto err1;
+	}
+
+	td->bldev = bldev;
+
+	bldev->props.fb_blank = FB_BLANK_UNBLANK;
+	bldev->props.power = FB_BLANK_UNBLANK;
+	if (td->use_dsi_bl) {
+		bldev->props.max_brightness = 255;
+		bldev->props.brightness = 255;
+	} else {
+		bldev->props.max_brightness = 127;
+		bldev->props.brightness = 127;
+	}
+
+	taal_bl_update_status(bldev);
+
+	if (dssdev->phy.dsi.ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+
+		r = gpio_request(gpio, "taal irq");
+		if (r) {
+			dev_err(&dssdev->dev, "GPIO request failed\n");
+			goto err2;
+		}
+
+		gpio_direction_input(gpio);
+
+		r = request_irq(gpio_to_irq(gpio), taal_te_isr,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING,
+				"taal vsync", dssdev);
+
+		if (r) {
+			dev_err(&dssdev->dev, "IRQ request failed\n");
+			gpio_free(gpio);
+			goto err2;
+		}
+
+		init_completion(&td->te_completion);
+
+		td->use_ext_te = true;
+	}
+
+	r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to create sysfs files\n");
+		goto err3;
+	}
+
+	return 0;
+err3:
+	if (td->use_ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+		free_irq(gpio_to_irq(gpio), dssdev);
+		gpio_free(gpio);
+	}
+err2:
+	backlight_device_unregister(bldev);
+err1:
+	kfree(td);
+err0:
+	return r;
+}
+
+static void taal_remove(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev;
+
+	dev_dbg(&dssdev->dev, "remove\n");
+
+	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
+
+	if (td->use_ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+		free_irq(gpio_to_irq(gpio), dssdev);
+		gpio_free(gpio);
+	}
+
+	bldev = td->bldev;
+	bldev->props.power = FB_BLANK_POWERDOWN;
+	taal_bl_update_status(bldev);
+	backlight_device_unregister(bldev);
+
+	kfree(td);
+}
+
+static int taal_enable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	/* it seems we have to wait a bit until taal is ready */
+	msleep(5);
+
+	r = taal_sleep_out(td);
+	if (r)
+		return r;
+
+	r = taal_get_id(&id1, &id2, &id3);
+	if (r)
+		return r;
+
+	/* on early revisions CABC is broken */
+	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+		td->cabc_broken = true;
+
+	taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
+	taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
+
+	taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+
+	taal_set_addr_mode(td->rotate, td->mirror);
+	if (!td->cabc_broken)
+		taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+
+	taal_dcs_write_0(DCS_DISPLAY_ON);
+
+	td->enabled = 1;
+
+	if (!td->intro_printed) {
+		dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
+				id1, id2, id3);
+		if (td->cabc_broken)
+			dev_info(&dssdev->dev,
+					"old Taal version, CABC disabled\n");
+		td->intro_printed = true;
+	}
+
+	return 0;
+}
+
+static void taal_disable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	taal_dcs_write_0(DCS_DISPLAY_OFF);
+	taal_sleep_in(td);
+
+	/* wait a bit so that the message goes through */
+	msleep(10);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	td->enabled = 0;
+}
+
+static int taal_suspend(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev = td->bldev;
+
+	bldev->props.power = FB_BLANK_POWERDOWN;
+	taal_bl_update_status(bldev);
+
+	return 0;
+}
+
+static int taal_resume(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev = td->bldev;
+
+	bldev->props.power = FB_BLANK_UNBLANK;
+	taal_bl_update_status(bldev);
+
+	return 0;
+}
+
+static void taal_setup_update(struct omap_dss_device *dssdev,
+				    u16 x, u16 y, u16 w, u16 h)
+{
+	taal_set_update_window(x, y, w, h);
+}
+
+static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	td->te_enabled = enable;
+
+	if (enable)
+		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
+	else
+		r = taal_dcs_write_0(DCS_TEAR_OFF);
+
+	return r;
+}
+
+static int taal_wait_te(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	long wait = msecs_to_jiffies(500);
+
+	if (!td->use_ext_te || !td->te_enabled)
+		return 0;
+
+	INIT_COMPLETION(td->te_completion);
+	wait = wait_for_completion_timeout(&td->te_completion, wait);
+	if (wait == 0) {
+		dev_err(&dssdev->dev, "timeout waiting TE\n");
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
+
+	if (td->enabled) {
+		r = taal_set_addr_mode(rotate, td->mirror);
+
+		if (r)
+			return r;
+	}
+
+	td->rotate = rotate;
+
+	return 0;
+}
+
+static u8 taal_get_rotate(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	return td->rotate;
+}
+
+static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
+
+	if (td->enabled) {
+		r = taal_set_addr_mode(td->rotate, enable);
+
+		if (r)
+			return r;
+	}
+
+	td->mirror = enable;
+
+	return 0;
+}
+
+static bool taal_get_mirror(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	return td->mirror;
+}
+
+static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
+{
+	u8 id1, id2, id3;
+	int r;
+
+	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID2, &id2);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID3, &id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int taal_memory_read(struct omap_dss_device *dssdev,
+		void *buf, size_t size,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	int first = 1;
+	int plen;
+	unsigned buf_used = 0;
+
+	if (size < w * h * 3)
+		return -ENOMEM;
+
+	size = min(w * h * 3,
+			dssdev->panel.timings.x_res *
+			dssdev->panel.timings.y_res * 3);
+
+	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
+	 * use short packets. plen 32 works, but bigger packets seem to cause
+	 * an error. */
+	if (size % 2)
+		plen = 1;
+	else
+		plen = 2;
+
+	taal_setup_update(dssdev, x, y, w, h);
+
+	r = dsi_vc_set_max_rx_packet_size(TCH, plen);
+	if (r)
+		return r;
+
+	while (buf_used < size) {
+		u8 dcs_cmd = first ? 0x2e : 0x3e;
+		first = 0;
+
+		r = dsi_vc_dcs_read(TCH, dcs_cmd,
+				buf + buf_used, size - buf_used);
+
+		if (r < 0) {
+			dev_err(&dssdev->dev, "read error\n");
+			goto err;
+		}
+
+		buf_used += r;
+
+		if (r < plen) {
+			dev_err(&dssdev->dev, "short read\n");
+			break;
+		}
+	}
+
+	r = buf_used;
+
+err:
+	dsi_vc_set_max_rx_packet_size(TCH, 1);
+
+	return r;
+}
+
+static struct omap_dss_driver taal_driver = {
+	.probe		= taal_probe,
+	.remove		= taal_remove,
+
+	.enable		= taal_enable,
+	.disable	= taal_disable,
+	.suspend	= taal_suspend,
+	.resume		= taal_resume,
+
+	.setup_update	= taal_setup_update,
+	.enable_te	= taal_enable_te,
+	.wait_for_te	= taal_wait_te,
+	.set_rotate	= taal_rotate,
+	.get_rotate	= taal_get_rotate,
+	.set_mirror	= taal_mirror,
+	.get_mirror	= taal_get_mirror,
+	.run_test	= taal_run_test,
+	.memory_read	= taal_memory_read,
+
+	.driver         = {
+		.name   = "taal",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init taal_init(void)
+{
+	omap_dss_register_driver(&taal_driver);
+
+	return 0;
+}
+
+static void __exit taal_exit(void)
+{
+	omap_dss_unregister_driver(&taal_driver);
+}
+
+module_init(taal_init);
+module_exit(taal_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
+MODULE_DESCRIPTION("Taal Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/video/omap2/dss/Kconfig
@@ -0,0 +1,89 @@
+menuconfig OMAP2_DSS
+        tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)"
+        depends on ARCH_OMAP2 || ARCH_OMAP3
+        help
+          OMAP2/3 Display Subsystem support.
+
+if OMAP2_DSS
+
+config OMAP2_VRAM_SIZE
+	int "VRAM size (MB)"
+	range 0 32
+	default 0
+	help
+	  The amount of SDRAM to reserve at boot time for video RAM use.
+	  This VRAM will be used by omapfb and other drivers that need
+	  large continuous RAM area for video use.
+
+	  You can also set this with "vram=<bytes>" kernel argument, or
+	  in the board file.
+
+config OMAP2_DSS_DEBUG_SUPPORT
+        bool "Debug support"
+	default y
+	help
+	  This enables debug messages. You need to enable printing
+	  with 'debug' module parameter.
+
+config OMAP2_DSS_RFBI
+	bool "RFBI support"
+        default n
+	help
+	  MIPI DBI, or RFBI (Remote Framebuffer Interface), support.
+
+config OMAP2_DSS_VENC
+	bool "VENC support"
+        default y
+	help
+	  OMAP Video Encoder support.
+
+config OMAP2_DSS_SDI
+	bool "SDI support"
+	depends on ARCH_OMAP3
+        default n
+	help
+	  SDI (Serial Display Interface) support.
+
+config OMAP2_DSS_DSI
+	bool "DSI support"
+	depends on ARCH_OMAP3
+        default n
+	help
+	  MIPI DSI support.
+
+config OMAP2_DSS_USE_DSI_PLL
+	bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
+	default n
+	depends on OMAP2_DSS_DSI
+	help
+	  Use DSI PLL to generate pixel clock.  Currently only for DPI output.
+	  DSI PLL can be used to generate higher and more precise pixel clocks.
+
+config OMAP2_DSS_FAKE_VSYNC
+	bool "Fake VSYNC irq from manual update displays"
+	default n
+	help
+	  If this is selected, DSI will generate a fake DISPC VSYNC interrupt
+	  when DSI has sent a frame. This is only needed with DSI or RFBI
+	  displays using manual mode, and you want VSYNC to, for example,
+	  time animation.
+
+config OMAP2_DSS_MIN_FCK_PER_PCK
+	int "Minimum FCK/PCK ratio (for scaling)"
+	range 0 32
+	default 0
+	help
+	  This can be used to adjust the minimum FCK/PCK ratio.
+
+	  With this you can make sure that DISPC FCK is at least
+	  n x PCK. Video plane scaling requires higher FCK than
+	  normally.
+
+	  If this is set to 0, there's no extra constraint on the
+	  DISPC FCK. However, the FCK will at minimum be
+	  2xPCK (if active matrix) or 3xPCK (if passive matrix).
+
+	  Max FCK is 173MHz, so this doesn't work if your PCK
+	  is very high.
+
+endif
--- /dev/null
+++ b/drivers/video/omap2/dss/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_OMAP2_DSS) += omapdss.o
+omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o
+omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
+omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
+omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
+omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
--- /dev/null
+++ b/drivers/video/omap2/dss/core.c
@@ -0,0 +1,917 @@
+/*
+ * linux/drivers/video/omap2/dss/core.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "CORE"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/device.h>
+
+#include <mach/display.h>
+#include <mach/clock.h>
+
+#include "dss.h"
+
+static struct {
+	struct platform_device *pdev;
+	int		ctx_id;
+
+	struct clk      *dss_ick;
+	struct clk	*dss1_fck;
+	struct clk	*dss2_fck;
+	struct clk      *dss_54m_fck;
+	struct clk	*dss_96m_fck;
+	unsigned	num_clks_enabled;
+} core;
+
+static void dss_clk_enable_all_no_ctx(void);
+static void dss_clk_disable_all_no_ctx(void);
+static void dss_clk_enable_no_ctx(enum dss_clock clks);
+static void dss_clk_disable_no_ctx(enum dss_clock clks);
+
+static char *def_disp_name;
+module_param_named(def_disp, def_disp_name, charp, 0);
+MODULE_PARM_DESC(def_disp_name, "default display name");
+
+#ifdef DEBUG
+unsigned int dss_debug;
+module_param_named(debug, dss_debug, bool, 0644);
+#endif
+
+/* CONTEXT */
+static int dss_get_ctx_id(void)
+{
+	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
+	int r;
+
+	if (!pdata->get_last_off_on_transaction_id)
+		return 0;
+	r = pdata->get_last_off_on_transaction_id(&core.pdev->dev);
+	if (r < 0) {
+		dev_err(&core.pdev->dev, "getting transaction ID failed, "
+				"will force context restore\n");
+		r = -1;
+	}
+	return r;
+}
+
+int dss_need_ctx_restore(void)
+{
+	int id = dss_get_ctx_id();
+
+	if (id < 0 || id != core.ctx_id) {
+		DSSDBG("ctx id %d -> id %d\n",
+				core.ctx_id, id);
+		core.ctx_id = id;
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static void save_all_ctx(void)
+{
+	DSSDBG("save context\n");
+
+	dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dss_save_context();
+	dispc_save_context();
+#ifdef CONFIG_OMAP2_DSS_DSI
+	dsi_save_context();
+#endif
+
+	dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+static void restore_all_ctx(void)
+{
+	DSSDBG("restore context\n");
+
+	dss_clk_enable_all_no_ctx();
+
+	dss_restore_context();
+	dispc_restore_context();
+#ifdef CONFIG_OMAP2_DSS_DSI
+	dsi_restore_context();
+#endif
+
+	dss_clk_disable_all_no_ctx();
+}
+
+/* CLOCKS */
+void dss_dump_clocks(struct seq_file *s)
+{
+	int i;
+	struct clk *clocks[5] = {
+		core.dss_ick,
+		core.dss1_fck,
+		core.dss2_fck,
+		core.dss_54m_fck,
+		core.dss_96m_fck
+	};
+
+	seq_printf(s, "- dss -\n");
+
+	seq_printf(s, "internal clk count\t%u\n", core.num_clks_enabled);
+
+	for (i = 0; i < 5; i++) {
+		if (!clocks[i])
+			continue;
+		seq_printf(s, "%-15s\t%lu\t%d\n",
+				clocks[i]->name,
+				clk_get_rate(clocks[i]),
+				clocks[i]->usecount);
+	}
+}
+
+static int dss_get_clock(struct clk **clock, const char *clk_name)
+{
+	struct clk *clk;
+
+	clk = clk_get(&core.pdev->dev, clk_name);
+
+	if (IS_ERR(clk)) {
+		DSSERR("can't get clock %s", clk_name);
+		return PTR_ERR(clk);
+	}
+
+	*clock = clk;
+
+	DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk));
+
+	return 0;
+}
+
+static int dss_get_clocks(void)
+{
+	int r;
+
+	core.dss_ick = NULL;
+	core.dss1_fck = NULL;
+	core.dss2_fck = NULL;
+	core.dss_54m_fck = NULL;
+	core.dss_96m_fck = NULL;
+
+	r = dss_get_clock(&core.dss_ick, "ick");
+	if (r)
+		goto err;
+
+	r = dss_get_clock(&core.dss1_fck, "dss1_fck");
+	if (r)
+		goto err;
+
+	r = dss_get_clock(&core.dss2_fck, "dss2_fck");
+	if (r)
+		goto err;
+
+	r = dss_get_clock(&core.dss_54m_fck, "tv_fck");
+	if (r)
+		goto err;
+
+	r = dss_get_clock(&core.dss_96m_fck, "video_fck");
+	if (r)
+		goto err;
+
+	return 0;
+
+err:
+	if (core.dss_ick)
+		clk_put(core.dss_ick);
+	if (core.dss1_fck)
+		clk_put(core.dss1_fck);
+	if (core.dss2_fck)
+		clk_put(core.dss2_fck);
+	if (core.dss_54m_fck)
+		clk_put(core.dss_54m_fck);
+	if (core.dss_96m_fck)
+		clk_put(core.dss_96m_fck);
+
+	return r;
+}
+
+static void dss_put_clocks(void)
+{
+	if (core.dss_96m_fck)
+		clk_put(core.dss_96m_fck);
+	clk_put(core.dss_54m_fck);
+	clk_put(core.dss1_fck);
+	clk_put(core.dss2_fck);
+	clk_put(core.dss_ick);
+}
+
+unsigned long dss_clk_get_rate(enum dss_clock clk)
+{
+	switch (clk) {
+	case DSS_CLK_ICK:
+		return clk_get_rate(core.dss_ick);
+	case DSS_CLK_FCK1:
+		return clk_get_rate(core.dss1_fck);
+	case DSS_CLK_FCK2:
+		return clk_get_rate(core.dss2_fck);
+	case DSS_CLK_54M:
+		return clk_get_rate(core.dss_54m_fck);
+	case DSS_CLK_96M:
+		return clk_get_rate(core.dss_96m_fck);
+	}
+
+	BUG();
+	return 0;
+}
+
+static unsigned count_clk_bits(enum dss_clock clks)
+{
+	unsigned num_clks = 0;
+
+	if (clks & DSS_CLK_ICK)
+		++num_clks;
+	if (clks & DSS_CLK_FCK1)
+		++num_clks;
+	if (clks & DSS_CLK_FCK2)
+		++num_clks;
+	if (clks & DSS_CLK_54M)
+		++num_clks;
+	if (clks & DSS_CLK_96M)
+		++num_clks;
+
+	return num_clks;
+}
+
+static void dss_clk_enable_no_ctx(enum dss_clock clks)
+{
+	unsigned num_clks = count_clk_bits(clks);
+
+	if (clks & DSS_CLK_ICK)
+		clk_enable(core.dss_ick);
+	if (clks & DSS_CLK_FCK1)
+		clk_enable(core.dss1_fck);
+	if (clks & DSS_CLK_FCK2)
+		clk_enable(core.dss2_fck);
+	if (clks & DSS_CLK_54M)
+		clk_enable(core.dss_54m_fck);
+	if (clks & DSS_CLK_96M)
+		clk_enable(core.dss_96m_fck);
+
+	core.num_clks_enabled += num_clks;
+}
+
+void dss_clk_enable(enum dss_clock clks)
+{
+	dss_clk_enable_no_ctx(clks);
+
+	if (cpu_is_omap34xx() && dss_need_ctx_restore())
+		restore_all_ctx();
+}
+
+static void dss_clk_disable_no_ctx(enum dss_clock clks)
+{
+	unsigned num_clks = count_clk_bits(clks);
+
+	if (clks & DSS_CLK_ICK)
+		clk_disable(core.dss_ick);
+	if (clks & DSS_CLK_FCK1)
+		clk_disable(core.dss1_fck);
+	if (clks & DSS_CLK_FCK2)
+		clk_disable(core.dss2_fck);
+	if (clks & DSS_CLK_54M)
+		clk_disable(core.dss_54m_fck);
+	if (clks & DSS_CLK_96M)
+		clk_disable(core.dss_96m_fck);
+
+	core.num_clks_enabled -= num_clks;
+}
+
+void dss_clk_disable(enum dss_clock clks)
+{
+	if (cpu_is_omap34xx()) {
+		unsigned num_clks = count_clk_bits(clks);
+
+		BUG_ON(core.num_clks_enabled < num_clks);
+
+		if (core.num_clks_enabled == num_clks)
+			save_all_ctx();
+	}
+
+	dss_clk_disable_no_ctx(clks);
+}
+
+static void dss_clk_enable_all_no_ctx(void)
+{
+	enum dss_clock clks;
+
+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
+	if (cpu_is_omap34xx())
+		clks |= DSS_CLK_96M;
+	dss_clk_enable_no_ctx(clks);
+}
+
+static void dss_clk_disable_all_no_ctx(void)
+{
+	enum dss_clock clks;
+
+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
+	if (cpu_is_omap34xx())
+		clks |= DSS_CLK_96M;
+	dss_clk_disable_no_ctx(clks);
+}
+
+static void dss_clk_disable_all(void)
+{
+	enum dss_clock clks;
+
+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
+	if (cpu_is_omap34xx())
+		clks |= DSS_CLK_96M;
+	dss_clk_disable(clks);
+}
+
+/* DEBUGFS */
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
+static void dss_debug_dump_clocks(struct seq_file *s)
+{
+	dss_dump_clocks(s);
+	dispc_dump_clocks(s);
+#ifdef CONFIG_OMAP2_DSS_DSI
+	dsi_dump_clocks(s);
+#endif
+}
+
+static int dss_debug_show(struct seq_file *s, void *unused)
+{
+	void (*func)(struct seq_file *) = s->private;
+	func(s);
+	return 0;
+}
+
+static int dss_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dss_debug_show, inode->i_private);
+}
+
+static const struct file_operations dss_debug_fops = {
+	.open           = dss_debug_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static struct dentry *dss_debugfs_dir;
+
+static int dss_initialize_debugfs(void)
+{
+	dss_debugfs_dir = debugfs_create_dir("omapdss", NULL);
+	if (IS_ERR(dss_debugfs_dir)) {
+		int err = PTR_ERR(dss_debugfs_dir);
+		dss_debugfs_dir = NULL;
+		return err;
+	}
+
+	debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
+			&dss_debug_dump_clocks, &dss_debug_fops);
+
+	debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
+			&dss_dump_regs, &dss_debug_fops);
+	debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
+			&dispc_dump_regs, &dss_debug_fops);
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir,
+			&rfbi_dump_regs, &dss_debug_fops);
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+	debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir,
+			&dsi_dump_regs, &dss_debug_fops);
+#endif
+#ifdef CONFIG_OMAP2_DSS_VENC
+	debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir,
+			&venc_dump_regs, &dss_debug_fops);
+#endif
+	return 0;
+}
+
+static void dss_uninitialize_debugfs(void)
+{
+	if (dss_debugfs_dir)
+		debugfs_remove_recursive(dss_debugfs_dir);
+}
+#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
+
+/* PLATFORM DEVICE */
+static int omap_dss_probe(struct platform_device *pdev)
+{
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int skip_init = 0;
+	int r;
+	int i;
+
+	core.pdev = pdev;
+
+	dss_init_overlay_managers(pdev);
+	dss_init_overlays(pdev);
+
+	r = dss_get_clocks();
+	if (r)
+		goto fail0;
+
+	dss_clk_enable_all_no_ctx();
+
+	core.ctx_id = dss_get_ctx_id();
+	DSSDBG("initial ctx id %u\n", core.ctx_id);
+
+#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
+	/* DISPC_CONTROL */
+	if (omap_readl(0x48050440) & 1)	/* LCD enabled? */
+		skip_init = 1;
+#endif
+
+	r = dss_init(skip_init);
+	if (r) {
+		DSSERR("Failed to initialize DSS\n");
+		goto fail0;
+	}
+
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	r = rfbi_init();
+	if (r) {
+		DSSERR("Failed to initialize rfbi\n");
+		goto fail0;
+	}
+#endif
+
+	r = dpi_init();
+	if (r) {
+		DSSERR("Failed to initialize dpi\n");
+		goto fail0;
+	}
+
+	r = dispc_init();
+	if (r) {
+		DSSERR("Failed to initialize dispc\n");
+		goto fail0;
+	}
+#ifdef CONFIG_OMAP2_DSS_VENC
+	r = venc_init(pdev);
+	if (r) {
+		DSSERR("Failed to initialize venc\n");
+		goto fail0;
+	}
+#endif
+	if (cpu_is_omap34xx()) {
+#ifdef CONFIG_OMAP2_DSS_SDI
+		r = sdi_init(skip_init);
+		if (r) {
+			DSSERR("Failed to initialize SDI\n");
+			goto fail0;
+		}
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+		r = dsi_init(pdev);
+		if (r) {
+			DSSERR("Failed to initialize DSI\n");
+			goto fail0;
+		}
+#endif
+	}
+
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
+	r = dss_initialize_debugfs();
+	if (r)
+		goto fail0;
+#endif
+
+	for (i = 0; i < pdata->num_devices; ++i) {
+		struct omap_dss_device *dssdev = pdata->devices[i];
+
+		r = omap_dss_register_device(dssdev);
+		if (r)
+			DSSERR("device reg failed %d\n", i);
+
+		if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0)
+			pdata->default_device = dssdev;
+	}
+
+	dss_clk_disable_all();
+
+	return 0;
+
+	/* XXX fail correctly */
+fail0:
+	return r;
+}
+
+static int omap_dss_remove(struct platform_device *pdev)
+{
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	int i;
+	int c;
+
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
+	dss_uninitialize_debugfs();
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+	venc_exit();
+#endif
+	dispc_exit();
+	dpi_exit();
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	rfbi_exit();
+#endif
+	if (cpu_is_omap34xx()) {
+#ifdef CONFIG_OMAP2_DSS_DSI
+		dsi_exit();
+#endif
+#ifdef CONFIG_OMAP2_DSS_SDI
+		sdi_exit();
+#endif
+	}
+
+	dss_exit();
+
+	/* these should be removed at some point */
+	c = core.dss_ick->usecount;
+	if (c > 0) {
+		DSSERR("warning: dss_ick usecount %d, disabling\n", c);
+		while (c-- > 0)
+			clk_disable(core.dss_ick);
+	}
+
+	c = core.dss1_fck->usecount;
+	if (c > 0) {
+		DSSERR("warning: dss1_fck usecount %d, disabling\n", c);
+		while (c-- > 0)
+			clk_disable(core.dss1_fck);
+	}
+
+	c = core.dss2_fck->usecount;
+	if (c > 0) {
+		DSSERR("warning: dss2_fck usecount %d, disabling\n", c);
+		while (c-- > 0)
+			clk_disable(core.dss2_fck);
+	}
+
+	c = core.dss_54m_fck->usecount;
+	if (c > 0) {
+		DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c);
+		while (c-- > 0)
+			clk_disable(core.dss_54m_fck);
+	}
+
+	if (core.dss_96m_fck) {
+		c = core.dss_96m_fck->usecount;
+		if (c > 0) {
+			DSSERR("warning: dss_96m_fck usecount %d, disabling\n",
+					c);
+			while (c-- > 0)
+				clk_disable(core.dss_96m_fck);
+		}
+	}
+
+	dss_put_clocks();
+
+	dss_uninit_overlays(pdev);
+	dss_uninit_overlay_managers(pdev);
+
+	for (i = 0; i < pdata->num_devices; ++i)
+		omap_dss_unregister_device(pdata->devices[i]);
+
+	return 0;
+}
+
+static void omap_dss_shutdown(struct platform_device *pdev)
+{
+	DSSDBG("shutdown\n");
+}
+
+static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	DSSDBG("suspend %d\n", state.event);
+
+	return dss_suspend_all_devices();
+}
+
+static int omap_dss_resume(struct platform_device *pdev)
+{
+	DSSDBG("resume\n");
+
+	return dss_resume_all_devices();
+}
+
+static struct platform_driver omap_dss_driver = {
+	.probe          = omap_dss_probe,
+	.remove         = omap_dss_remove,
+	.shutdown	= omap_dss_shutdown,
+	.suspend	= omap_dss_suspend,
+	.resume		= omap_dss_resume,
+	.driver         = {
+		.name   = "omapdss",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/* BUS */
+static int dss_bus_match(struct device *dev, struct device_driver *driver)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+
+	DSSDBG("bus_match. dev %s/%s, drv %s\n",
+			dev_name(dev), dssdev->driver_name, driver->name);
+
+	return strcmp(dssdev->driver_name, driver->name) == 0;
+}
+
+static ssize_t device_name_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			dssdev->name ?
+			dssdev->name : "");
+}
+
+static struct device_attribute default_dev_attrs[] = {
+	__ATTR(name, S_IRUGO, device_name_show, NULL),
+	__ATTR_NULL,
+};
+
+static ssize_t driver_name_show(struct device_driver *drv, char *buf)
+{
+	struct omap_dss_driver *dssdrv = to_dss_driver(drv);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			dssdrv->driver.name ?
+			dssdrv->driver.name : "");
+}
+static struct driver_attribute default_drv_attrs[] = {
+	__ATTR(name, S_IRUGO, driver_name_show, NULL),
+	__ATTR_NULL,
+};
+
+static struct bus_type dss_bus_type = {
+	.name = "omapdss",
+	.match = dss_bus_match,
+	.dev_attrs = default_dev_attrs,
+	.drv_attrs = default_drv_attrs,
+};
+
+static void dss_bus_release(struct device *dev)
+{
+	DSSDBG("bus_release\n");
+}
+
+static struct device dss_bus = {
+	.release = dss_bus_release,
+};
+
+struct bus_type *dss_get_bus(void)
+{
+	return &dss_bus_type;
+}
+
+/* DRIVER */
+static int dss_driver_probe(struct device *dev)
+{
+	int r;
+	struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
+	bool force;
+
+	DSSDBG("driver_probe: dev %s/%s, drv %s\n",
+				dev_name(dev), dssdev->driver_name,
+				dssdrv->driver.name);
+
+	dss_init_device(core.pdev, dssdev);
+
+	/* skip this if the device is behind a ctrl */
+	if (!dssdev->panel.ctrl) {
+		force = pdata->default_device == dssdev;
+		dss_recheck_connections(dssdev, force);
+	}
+
+	r = dssdrv->probe(dssdev);
+
+	if (r) {
+		DSSERR("driver probe failed: %d\n", r);
+		return r;
+	}
+
+	DSSDBG("probe done for device %s\n", dev_name(dev));
+
+	dssdev->driver = dssdrv;
+
+	return 0;
+}
+
+static int dss_driver_remove(struct device *dev)
+{
+	struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+
+	DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev),
+			dssdev->driver_name);
+
+	dssdrv->remove(dssdev);
+
+	dss_uninit_device(core.pdev, dssdev);
+
+	dssdev->driver = NULL;
+
+	return 0;
+}
+
+int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
+{
+	dssdriver->driver.bus = &dss_bus_type;
+	dssdriver->driver.probe = dss_driver_probe;
+	dssdriver->driver.remove = dss_driver_remove;
+	return driver_register(&dssdriver->driver);
+}
+EXPORT_SYMBOL(omap_dss_register_driver);
+
+void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver)
+{
+	driver_unregister(&dssdriver->driver);
+}
+EXPORT_SYMBOL(omap_dss_unregister_driver);
+
+/* DEVICE */
+static void reset_device(struct device *dev, int check)
+{
+	u8 *dev_p = (u8 *)dev;
+	u8 *dev_end = dev_p + sizeof(*dev);
+	void *saved_pdata;
+
+	saved_pdata = dev->platform_data;
+	if (check) {
+		/*
+		 * Check if there is any other setting than platform_data
+		 * in struct device; warn that these will be reset by our
+		 * init.
+		 */
+		dev->platform_data = NULL;
+		while (dev_p < dev_end) {
+			if (*dev_p) {
+				WARN("%s: struct device fields will be "
+						"discarded\n",
+				     __func__);
+				break;
+			}
+			dev_p++;
+		}
+	}
+	memset(dev, 0, sizeof(*dev));
+	dev->platform_data = saved_pdata;
+}
+
+
+static void omap_dss_dev_release(struct device *dev)
+{
+	reset_device(dev, 0);
+}
+
+int omap_dss_register_device(struct omap_dss_device *dssdev)
+{
+	static int dev_num;
+	static int panel_num;
+	int r;
+
+	WARN_ON(!dssdev->driver_name);
+
+	reset_device(&dssdev->dev, 1);
+	dssdev->dev.bus = &dss_bus_type;
+	dssdev->dev.parent = &dss_bus;
+	dssdev->dev.release = omap_dss_dev_release;
+	dev_set_name(&dssdev->dev, "display%d", dev_num++);
+	r = device_register(&dssdev->dev);
+	if (r)
+		return r;
+
+	if (dssdev->ctrl.panel) {
+		struct omap_dss_device *panel = dssdev->ctrl.panel;
+
+		panel->panel.ctrl = dssdev;
+
+		reset_device(&panel->dev, 1);
+		panel->dev.bus = &dss_bus_type;
+		panel->dev.parent = &dssdev->dev;
+		panel->dev.release = omap_dss_dev_release;
+		dev_set_name(&panel->dev, "panel%d", panel_num++);
+		r = device_register(&panel->dev);
+		if (r)
+			return r;
+	}
+
+	return 0;
+}
+
+void omap_dss_unregister_device(struct omap_dss_device *dssdev)
+{
+	device_unregister(&dssdev->dev);
+
+	if (dssdev->ctrl.panel) {
+		struct omap_dss_device *panel = dssdev->ctrl.panel;
+		device_unregister(&panel->dev);
+	}
+}
+
+/* BUS */
+static int omap_dss_bus_register(void)
+{
+	int r;
+
+	r = bus_register(&dss_bus_type);
+	if (r) {
+		DSSERR("bus register failed\n");
+		return r;
+	}
+
+	dev_set_name(&dss_bus, "omapdss");
+	r = device_register(&dss_bus);
+	if (r) {
+		DSSERR("bus driver register failed\n");
+		bus_unregister(&dss_bus_type);
+		return r;
+	}
+
+	return 0;
+}
+
+/* INIT */
+
+#ifdef CONFIG_OMAP2_DSS_MODULE
+static void omap_dss_bus_unregister(void)
+{
+	device_unregister(&dss_bus);
+
+	bus_unregister(&dss_bus_type);
+}
+
+static int __init omap_dss_init(void)
+{
+	int r;
+
+	r = omap_dss_bus_register();
+	if (r)
+		return r;
+
+	r = platform_driver_register(&omap_dss_driver);
+	if (r) {
+		omap_dss_bus_unregister();
+		return r;
+	}
+
+	return 0;
+}
+
+static void __exit omap_dss_exit(void)
+{
+	platform_driver_unregister(&omap_dss_driver);
+
+	omap_dss_bus_unregister();
+}
+
+module_init(omap_dss_init);
+module_exit(omap_dss_exit);
+#else
+static int __init omap_dss_init(void)
+{
+	return omap_dss_bus_register();
+}
+
+static int __init omap_dss_init2(void)
+{
+	return platform_driver_register(&omap_dss_driver);
+}
+
+core_initcall(omap_dss_init);
+device_initcall(omap_dss_init2);
+#endif
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
+MODULE_DESCRIPTION("OMAP2/3 Display Subsystem");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+++ b/drivers/video/omap2/dss/dispc.c
@@ -0,0 +1,3182 @@
+/*
+ * linux/drivers/video/omap2/dss/dispc.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "DISPC"
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+
+#include <mach/sram.h>
+#include <mach/board.h>
+#include <mach/clock.h>
+
+#include <mach/display.h>
+
+#include "dss.h"
+
+/* DISPC */
+#define DISPC_BASE			0x48050400
+
+#define DISPC_SZ_REGS			SZ_1K
+
+struct dispc_reg { u16 idx; };
+
+#define DISPC_REG(idx)			((const struct dispc_reg) { idx })
+
+/* DISPC common */
+#define DISPC_REVISION			DISPC_REG(0x0000)
+#define DISPC_SYSCONFIG			DISPC_REG(0x0010)
+#define DISPC_SYSSTATUS			DISPC_REG(0x0014)
+#define DISPC_IRQSTATUS			DISPC_REG(0x0018)
+#define DISPC_IRQENABLE			DISPC_REG(0x001C)
+#define DISPC_CONTROL			DISPC_REG(0x0040)
+#define DISPC_CONFIG			DISPC_REG(0x0044)
+#define DISPC_CAPABLE			DISPC_REG(0x0048)
+#define DISPC_DEFAULT_COLOR0		DISPC_REG(0x004C)
+#define DISPC_DEFAULT_COLOR1		DISPC_REG(0x0050)
+#define DISPC_TRANS_COLOR0		DISPC_REG(0x0054)
+#define DISPC_TRANS_COLOR1		DISPC_REG(0x0058)
+#define DISPC_LINE_STATUS		DISPC_REG(0x005C)
+#define DISPC_LINE_NUMBER		DISPC_REG(0x0060)
+#define DISPC_TIMING_H			DISPC_REG(0x0064)
+#define DISPC_TIMING_V			DISPC_REG(0x0068)
+#define DISPC_POL_FREQ			DISPC_REG(0x006C)
+#define DISPC_DIVISOR			DISPC_REG(0x0070)
+#define DISPC_GLOBAL_ALPHA		DISPC_REG(0x0074)
+#define DISPC_SIZE_DIG			DISPC_REG(0x0078)
+#define DISPC_SIZE_LCD			DISPC_REG(0x007C)
+
+/* DISPC GFX plane */
+#define DISPC_GFX_BA0			DISPC_REG(0x0080)
+#define DISPC_GFX_BA1			DISPC_REG(0x0084)
+#define DISPC_GFX_POSITION		DISPC_REG(0x0088)
+#define DISPC_GFX_SIZE			DISPC_REG(0x008C)
+#define DISPC_GFX_ATTRIBUTES		DISPC_REG(0x00A0)
+#define DISPC_GFX_FIFO_THRESHOLD	DISPC_REG(0x00A4)
+#define DISPC_GFX_FIFO_SIZE_STATUS	DISPC_REG(0x00A8)
+#define DISPC_GFX_ROW_INC		DISPC_REG(0x00AC)
+#define DISPC_GFX_PIXEL_INC		DISPC_REG(0x00B0)
+#define DISPC_GFX_WINDOW_SKIP		DISPC_REG(0x00B4)
+#define DISPC_GFX_TABLE_BA		DISPC_REG(0x00B8)
+
+#define DISPC_DATA_CYCLE1		DISPC_REG(0x01D4)
+#define DISPC_DATA_CYCLE2		DISPC_REG(0x01D8)
+#define DISPC_DATA_CYCLE3		DISPC_REG(0x01DC)
+
+#define DISPC_CPR_COEF_R		DISPC_REG(0x0220)
+#define DISPC_CPR_COEF_G		DISPC_REG(0x0224)
+#define DISPC_CPR_COEF_B		DISPC_REG(0x0228)
+
+#define DISPC_GFX_PRELOAD		DISPC_REG(0x022C)
+
+/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */
+#define DISPC_VID_REG(n, idx)		DISPC_REG(0x00BC + (n)*0x90 + idx)
+
+#define DISPC_VID_BA0(n)		DISPC_VID_REG(n, 0x0000)
+#define DISPC_VID_BA1(n)		DISPC_VID_REG(n, 0x0004)
+#define DISPC_VID_POSITION(n)		DISPC_VID_REG(n, 0x0008)
+#define DISPC_VID_SIZE(n)		DISPC_VID_REG(n, 0x000C)
+#define DISPC_VID_ATTRIBUTES(n)		DISPC_VID_REG(n, 0x0010)
+#define DISPC_VID_FIFO_THRESHOLD(n)	DISPC_VID_REG(n, 0x0014)
+#define DISPC_VID_FIFO_SIZE_STATUS(n)	DISPC_VID_REG(n, 0x0018)
+#define DISPC_VID_ROW_INC(n)		DISPC_VID_REG(n, 0x001C)
+#define DISPC_VID_PIXEL_INC(n)		DISPC_VID_REG(n, 0x0020)
+#define DISPC_VID_FIR(n)		DISPC_VID_REG(n, 0x0024)
+#define DISPC_VID_PICTURE_SIZE(n)	DISPC_VID_REG(n, 0x0028)
+#define DISPC_VID_ACCU0(n)		DISPC_VID_REG(n, 0x002C)
+#define DISPC_VID_ACCU1(n)		DISPC_VID_REG(n, 0x0030)
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+#define DISPC_VID_FIR_COEF_H(n, i)	DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8)
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+#define DISPC_VID_FIR_COEF_HV(n, i)	DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8)
+/* coef index i = {0, 1, 2, 3, 4} */
+#define DISPC_VID_CONV_COEF(n, i)	DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4)
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+#define DISPC_VID_FIR_COEF_V(n, i)	DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4)
+
+#define DISPC_VID_PRELOAD(n)		DISPC_REG(0x230 + (n)*0x04)
+
+
+#define DISPC_IRQ_MASK_ERROR            (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_OCP_ERR | \
+					 DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_SYNC_LOST | \
+					 DISPC_IRQ_SYNC_LOST_DIGIT)
+
+#define DISPC_MAX_NR_ISRS		8
+
+struct omap_dispc_isr_data {
+	omap_dispc_isr_t	isr;
+	void			*arg;
+	u32			mask;
+};
+
+#define REG_GET(idx, start, end) \
+	FLD_GET(dispc_read_reg(idx), start, end)
+
+#define REG_FLD_MOD(idx, val, start, end)				\
+	dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end))
+
+static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES,
+	DISPC_VID_ATTRIBUTES(0),
+	DISPC_VID_ATTRIBUTES(1) };
+
+static struct {
+	void __iomem    *base;
+
+	struct clk	*dpll4_m4_ck;
+
+	unsigned long	cache_req_pck;
+	unsigned long	cache_prate;
+	struct dispc_clock_info cache_cinfo;
+
+	u32	fifo_size[3];
+
+	spinlock_t irq_lock;
+	u32 irq_error_mask;
+	struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
+	u32 error_irqs;
+	struct work_struct error_work;
+
+	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
+} dispc;
+
+static void _omap_dispc_set_irqs(void);
+
+static inline void dispc_write_reg(const struct dispc_reg idx, u32 val)
+{
+	__raw_writel(val, dispc.base + idx.idx);
+}
+
+static inline u32 dispc_read_reg(const struct dispc_reg idx)
+{
+	return __raw_readl(dispc.base + idx.idx);
+}
+
+#define SR(reg) \
+	dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg)
+#define RR(reg) \
+	dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)])
+
+void dispc_save_context(void)
+{
+	if (cpu_is_omap24xx())
+		return;
+
+	SR(SYSCONFIG);
+	SR(IRQENABLE);
+	SR(CONTROL);
+	SR(CONFIG);
+	SR(DEFAULT_COLOR0);
+	SR(DEFAULT_COLOR1);
+	SR(TRANS_COLOR0);
+	SR(TRANS_COLOR1);
+	SR(LINE_NUMBER);
+	SR(TIMING_H);
+	SR(TIMING_V);
+	SR(POL_FREQ);
+	SR(DIVISOR);
+	SR(GLOBAL_ALPHA);
+	SR(SIZE_DIG);
+	SR(SIZE_LCD);
+
+	SR(GFX_BA0);
+	SR(GFX_BA1);
+	SR(GFX_POSITION);
+	SR(GFX_SIZE);
+	SR(GFX_ATTRIBUTES);
+	SR(GFX_FIFO_THRESHOLD);
+	SR(GFX_ROW_INC);
+	SR(GFX_PIXEL_INC);
+	SR(GFX_WINDOW_SKIP);
+	SR(GFX_TABLE_BA);
+
+	SR(DATA_CYCLE1);
+	SR(DATA_CYCLE2);
+	SR(DATA_CYCLE3);
+
+	SR(CPR_COEF_R);
+	SR(CPR_COEF_G);
+	SR(CPR_COEF_B);
+
+	SR(GFX_PRELOAD);
+
+	/* VID1 */
+	SR(VID_BA0(0));
+	SR(VID_BA1(0));
+	SR(VID_POSITION(0));
+	SR(VID_SIZE(0));
+	SR(VID_ATTRIBUTES(0));
+	SR(VID_FIFO_THRESHOLD(0));
+	SR(VID_ROW_INC(0));
+	SR(VID_PIXEL_INC(0));
+	SR(VID_FIR(0));
+	SR(VID_PICTURE_SIZE(0));
+	SR(VID_ACCU0(0));
+	SR(VID_ACCU1(0));
+
+	SR(VID_FIR_COEF_H(0, 0));
+	SR(VID_FIR_COEF_H(0, 1));
+	SR(VID_FIR_COEF_H(0, 2));
+	SR(VID_FIR_COEF_H(0, 3));
+	SR(VID_FIR_COEF_H(0, 4));
+	SR(VID_FIR_COEF_H(0, 5));
+	SR(VID_FIR_COEF_H(0, 6));
+	SR(VID_FIR_COEF_H(0, 7));
+
+	SR(VID_FIR_COEF_HV(0, 0));
+	SR(VID_FIR_COEF_HV(0, 1));
+	SR(VID_FIR_COEF_HV(0, 2));
+	SR(VID_FIR_COEF_HV(0, 3));
+	SR(VID_FIR_COEF_HV(0, 4));
+	SR(VID_FIR_COEF_HV(0, 5));
+	SR(VID_FIR_COEF_HV(0, 6));
+	SR(VID_FIR_COEF_HV(0, 7));
+
+	SR(VID_CONV_COEF(0, 0));
+	SR(VID_CONV_COEF(0, 1));
+	SR(VID_CONV_COEF(0, 2));
+	SR(VID_CONV_COEF(0, 3));
+	SR(VID_CONV_COEF(0, 4));
+
+	SR(VID_FIR_COEF_V(0, 0));
+	SR(VID_FIR_COEF_V(0, 1));
+	SR(VID_FIR_COEF_V(0, 2));
+	SR(VID_FIR_COEF_V(0, 3));
+	SR(VID_FIR_COEF_V(0, 4));
+	SR(VID_FIR_COEF_V(0, 5));
+	SR(VID_FIR_COEF_V(0, 6));
+	SR(VID_FIR_COEF_V(0, 7));
+
+	SR(VID_PRELOAD(0));
+
+	/* VID2 */
+	SR(VID_BA0(1));
+	SR(VID_BA1(1));
+	SR(VID_POSITION(1));
+	SR(VID_SIZE(1));
+	SR(VID_ATTRIBUTES(1));
+	SR(VID_FIFO_THRESHOLD(1));
+	SR(VID_ROW_INC(1));
+	SR(VID_PIXEL_INC(1));
+	SR(VID_FIR(1));
+	SR(VID_PICTURE_SIZE(1));
+	SR(VID_ACCU0(1));
+	SR(VID_ACCU1(1));
+
+	SR(VID_FIR_COEF_H(1, 0));
+	SR(VID_FIR_COEF_H(1, 1));
+	SR(VID_FIR_COEF_H(1, 2));
+	SR(VID_FIR_COEF_H(1, 3));
+	SR(VID_FIR_COEF_H(1, 4));
+	SR(VID_FIR_COEF_H(1, 5));
+	SR(VID_FIR_COEF_H(1, 6));
+	SR(VID_FIR_COEF_H(1, 7));
+
+	SR(VID_FIR_COEF_HV(1, 0));
+	SR(VID_FIR_COEF_HV(1, 1));
+	SR(VID_FIR_COEF_HV(1, 2));
+	SR(VID_FIR_COEF_HV(1, 3));
+	SR(VID_FIR_COEF_HV(1, 4));
+	SR(VID_FIR_COEF_HV(1, 5));
+	SR(VID_FIR_COEF_HV(1, 6));
+	SR(VID_FIR_COEF_HV(1, 7));
+
+	SR(VID_CONV_COEF(1, 0));
+	SR(VID_CONV_COEF(1, 1));
+	SR(VID_CONV_COEF(1, 2));
+	SR(VID_CONV_COEF(1, 3));
+	SR(VID_CONV_COEF(1, 4));
+
+	SR(VID_FIR_COEF_V(1, 0));
+	SR(VID_FIR_COEF_V(1, 1));
+	SR(VID_FIR_COEF_V(1, 2));
+	SR(VID_FIR_COEF_V(1, 3));
+	SR(VID_FIR_COEF_V(1, 4));
+	SR(VID_FIR_COEF_V(1, 5));
+	SR(VID_FIR_COEF_V(1, 6));
+	SR(VID_FIR_COEF_V(1, 7));
+
+	SR(VID_PRELOAD(1));
+}
+
+void dispc_restore_context(void)
+{
+	RR(SYSCONFIG);
+	RR(IRQENABLE);
+	/*RR(CONTROL);*/
+	RR(CONFIG);
+	RR(DEFAULT_COLOR0);
+	RR(DEFAULT_COLOR1);
+	RR(TRANS_COLOR0);
+	RR(TRANS_COLOR1);
+	RR(LINE_NUMBER);
+	RR(TIMING_H);
+	RR(TIMING_V);
+	RR(POL_FREQ);
+	RR(DIVISOR);
+	RR(GLOBAL_ALPHA);
+	RR(SIZE_DIG);
+	RR(SIZE_LCD);
+
+	RR(GFX_BA0);
+	RR(GFX_BA1);
+	RR(GFX_POSITION);
+	RR(GFX_SIZE);
+	RR(GFX_ATTRIBUTES);
+	RR(GFX_FIFO_THRESHOLD);
+	RR(GFX_ROW_INC);
+	RR(GFX_PIXEL_INC);
+	RR(GFX_WINDOW_SKIP);
+	RR(GFX_TABLE_BA);
+
+	RR(DATA_CYCLE1);
+	RR(DATA_CYCLE2);
+	RR(DATA_CYCLE3);
+
+	RR(CPR_COEF_R);
+	RR(CPR_COEF_G);
+	RR(CPR_COEF_B);
+
+	RR(GFX_PRELOAD);
+
+	/* VID1 */
+	RR(VID_BA0(0));
+	RR(VID_BA1(0));
+	RR(VID_POSITION(0));
+	RR(VID_SIZE(0));
+	RR(VID_ATTRIBUTES(0));
+	RR(VID_FIFO_THRESHOLD(0));
+	RR(VID_ROW_INC(0));
+	RR(VID_PIXEL_INC(0));
+	RR(VID_FIR(0));
+	RR(VID_PICTURE_SIZE(0));
+	RR(VID_ACCU0(0));
+	RR(VID_ACCU1(0));
+
+	RR(VID_FIR_COEF_H(0, 0));
+	RR(VID_FIR_COEF_H(0, 1));
+	RR(VID_FIR_COEF_H(0, 2));
+	RR(VID_FIR_COEF_H(0, 3));
+	RR(VID_FIR_COEF_H(0, 4));
+	RR(VID_FIR_COEF_H(0, 5));
+	RR(VID_FIR_COEF_H(0, 6));
+	RR(VID_FIR_COEF_H(0, 7));
+
+	RR(VID_FIR_COEF_HV(0, 0));
+	RR(VID_FIR_COEF_HV(0, 1));
+	RR(VID_FIR_COEF_HV(0, 2));
+	RR(VID_FIR_COEF_HV(0, 3));
+	RR(VID_FIR_COEF_HV(0, 4));
+	RR(VID_FIR_COEF_HV(0, 5));
+	RR(VID_FIR_COEF_HV(0, 6));
+	RR(VID_FIR_COEF_HV(0, 7));
+
+	RR(VID_CONV_COEF(0, 0));
+	RR(VID_CONV_COEF(0, 1));
+	RR(VID_CONV_COEF(0, 2));
+	RR(VID_CONV_COEF(0, 3));
+	RR(VID_CONV_COEF(0, 4));
+
+	RR(VID_FIR_COEF_V(0, 0));
+	RR(VID_FIR_COEF_V(0, 1));
+	RR(VID_FIR_COEF_V(0, 2));
+	RR(VID_FIR_COEF_V(0, 3));
+	RR(VID_FIR_COEF_V(0, 4));
+	RR(VID_FIR_COEF_V(0, 5));
+	RR(VID_FIR_COEF_V(0, 6));
+	RR(VID_FIR_COEF_V(0, 7));
+
+	RR(VID_PRELOAD(0));
+
+	/* VID2 */
+	RR(VID_BA0(1));
+	RR(VID_BA1(1));
+	RR(VID_POSITION(1));
+	RR(VID_SIZE(1));
+	RR(VID_ATTRIBUTES(1));
+	RR(VID_FIFO_THRESHOLD(1));
+	RR(VID_ROW_INC(1));
+	RR(VID_PIXEL_INC(1));
+	RR(VID_FIR(1));
+	RR(VID_PICTURE_SIZE(1));
+	RR(VID_ACCU0(1));
+	RR(VID_ACCU1(1));
+
+	RR(VID_FIR_COEF_H(1, 0));
+	RR(VID_FIR_COEF_H(1, 1));
+	RR(VID_FIR_COEF_H(1, 2));
+	RR(VID_FIR_COEF_H(1, 3));
+	RR(VID_FIR_COEF_H(1, 4));
+	RR(VID_FIR_COEF_H(1, 5));
+	RR(VID_FIR_COEF_H(1, 6));
+	RR(VID_FIR_COEF_H(1, 7));
+
+	RR(VID_FIR_COEF_HV(1, 0));
+	RR(VID_FIR_COEF_HV(1, 1));
+	RR(VID_FIR_COEF_HV(1, 2));
+	RR(VID_FIR_COEF_HV(1, 3));
+	RR(VID_FIR_COEF_HV(1, 4));
+	RR(VID_FIR_COEF_HV(1, 5));
+	RR(VID_FIR_COEF_HV(1, 6));
+	RR(VID_FIR_COEF_HV(1, 7));
+
+	RR(VID_CONV_COEF(1, 0));
+	RR(VID_CONV_COEF(1, 1));
+	RR(VID_CONV_COEF(1, 2));
+	RR(VID_CONV_COEF(1, 3));
+	RR(VID_CONV_COEF(1, 4));
+
+	RR(VID_FIR_COEF_V(1, 0));
+	RR(VID_FIR_COEF_V(1, 1));
+	RR(VID_FIR_COEF_V(1, 2));
+	RR(VID_FIR_COEF_V(1, 3));
+	RR(VID_FIR_COEF_V(1, 4));
+	RR(VID_FIR_COEF_V(1, 5));
+	RR(VID_FIR_COEF_V(1, 6));
+	RR(VID_FIR_COEF_V(1, 7));
+
+	RR(VID_PRELOAD(1));
+
+	/* enable last, because LCD & DIGIT enable are here */
+	RR(CONTROL);
+}
+
+#undef SR
+#undef RR
+
+static inline void enable_clocks(bool enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	else
+		dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+bool dispc_go_busy(enum omap_channel channel)
+{
+	int bit;
+
+	if (channel == OMAP_DSS_CHANNEL_LCD)
+		bit = 5; /* GOLCD */
+	else
+		bit = 6; /* GODIGIT */
+
+	return REG_GET(DISPC_CONTROL, bit, bit) == 1;
+}
+
+void dispc_go(enum omap_channel channel)
+{
+	int bit;
+
+	enable_clocks(1);
+
+	if (channel == OMAP_DSS_CHANNEL_LCD)
+		bit = 0; /* LCDENABLE */
+	else
+		bit = 1; /* DIGITALENABLE */
+
+	/* if the channel is not enabled, we don't need GO */
+	if (REG_GET(DISPC_CONTROL, bit, bit) == 0)
+		goto end;
+
+	if (channel == OMAP_DSS_CHANNEL_LCD)
+		bit = 5; /* GOLCD */
+	else
+		bit = 6; /* GODIGIT */
+
+	if (REG_GET(DISPC_CONTROL, bit, bit) == 1) {
+		DSSERR("GO bit not down for channel %d\n", channel);
+		goto end;
+	}
+
+	DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT");
+
+	REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit);
+end:
+	enable_clocks(0);
+}
+
+static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value)
+{
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value);
+}
+
+static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value)
+{
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value);
+}
+
+static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value)
+{
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value);
+}
+
+static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup,
+		int vscaleup, int five_taps)
+{
+	/* Coefficients for horizontal up-sampling */
+	static const u32 coef_hup[8] = {
+		0x00800000,
+		0x0D7CF800,
+		0x1E70F5FF,
+		0x335FF5FE,
+		0xF74949F7,
+		0xF55F33FB,
+		0xF5701EFE,
+		0xF87C0DFF,
+	};
+
+	/* Coefficients for horizontal down-sampling */
+	static const u32 coef_hdown[8] = {
+		0x24382400,
+		0x28371FFE,
+		0x2C361BFB,
+		0x303516F9,
+		0x11343311,
+		0x1635300C,
+		0x1B362C08,
+		0x1F372804,
+	};
+
+	/* Coefficients for horizontal and vertical up-sampling */
+	static const u32 coef_hvup[2][8] = {
+		{
+		0x00800000,
+		0x037B02FF,
+		0x0C6F05FE,
+		0x205907FB,
+		0x00404000,
+		0x075920FE,
+		0x056F0CFF,
+		0x027B0300,
+		},
+		{
+		0x00800000,
+		0x0D7CF8FF,
+		0x1E70F5FE,
+		0x335FF5FB,
+		0xF7404000,
+		0xF55F33FE,
+		0xF5701EFF,
+		0xF87C0D00,
+		},
+	};
+
+	/* Coefficients for horizontal and vertical down-sampling */
+	static const u32 coef_hvdown[2][8] = {
+		{
+		0x24382400,
+		0x28391F04,
+		0x2D381B08,
+		0x3237170C,
+		0x123737F7,
+		0x173732F9,
+		0x1B382DFB,
+		0x1F3928FE,
+		},
+		{
+		0x24382400,
+		0x28371F04,
+		0x2C361B08,
+		0x3035160C,
+		0x113433F7,
+		0x163530F9,
+		0x1B362CFB,
+		0x1F3728FE,
+		},
+	};
+
+	/* Coefficients for vertical up-sampling */
+	static const u32 coef_vup[8] = {
+		0x00000000,
+		0x0000FF00,
+		0x0000FEFF,
+		0x0000FBFE,
+		0x000000F7,
+		0x0000FEFB,
+		0x0000FFFE,
+		0x000000FF,
+	};
+
+
+	/* Coefficients for vertical down-sampling */
+	static const u32 coef_vdown[8] = {
+		0x00000000,
+		0x000004FE,
+		0x000008FB,
+		0x00000CF9,
+		0x0000F711,
+		0x0000F90C,
+		0x0000FB08,
+		0x0000FE04,
+	};
+
+	const u32 *h_coef;
+	const u32 *hv_coef;
+	const u32 *hv_coef_mod;
+	const u32 *v_coef;
+	int i;
+
+	if (hscaleup)
+		h_coef = coef_hup;
+	else
+		h_coef = coef_hdown;
+
+	if (vscaleup) {
+		hv_coef = coef_hvup[five_taps];
+		v_coef = coef_vup;
+
+		if (hscaleup)
+			hv_coef_mod = NULL;
+		else
+			hv_coef_mod = coef_hvdown[five_taps];
+	} else {
+		hv_coef = coef_hvdown[five_taps];
+		v_coef = coef_vdown;
+
+		if (hscaleup)
+			hv_coef_mod = coef_hvup[five_taps];
+		else
+			hv_coef_mod = NULL;
+	}
+
+	for (i = 0; i < 8; i++) {
+		u32 h, hv;
+
+		h = h_coef[i];
+
+		hv = hv_coef[i];
+
+		if (hv_coef_mod) {
+			hv &= 0xffffff00;
+			hv |= (hv_coef_mod[i] & 0xff);
+		}
+
+		_dispc_write_firh_reg(plane, i, h);
+		_dispc_write_firhv_reg(plane, i, hv);
+	}
+
+	if (!five_taps)
+		return;
+
+	for (i = 0; i < 8; i++) {
+		u32 v;
+		v = v_coef[i];
+		_dispc_write_firv_reg(plane, i, v);
+	}
+}
+
+static void _dispc_setup_color_conv_coef(void)
+{
+	const struct color_conv_coef {
+		int  ry,  rcr,  rcb,   gy,  gcr,  gcb,   by,  bcr,  bcb;
+		int  full_range;
+	}  ctbl_bt601_5 = {
+		298,  409,    0,  298, -208, -100,  298,    0,  517, 0,
+	};
+
+	const struct color_conv_coef *ct;
+
+#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
+
+	ct = &ctbl_bt601_5;
+
+	dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry));
+	dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy,	 ct->rcb));
+	dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr));
+	dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by));
+	dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0,       ct->bcb));
+
+	dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry));
+	dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy,	 ct->rcb));
+	dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr));
+	dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by));
+	dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0,       ct->bcb));
+
+#undef CVAL
+
+	REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11);
+	REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11);
+}
+
+
+static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr)
+{
+	const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0,
+		DISPC_VID_BA0(0),
+		DISPC_VID_BA0(1) };
+
+	dispc_write_reg(ba0_reg[plane], paddr);
+}
+
+static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr)
+{
+	const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1,
+				      DISPC_VID_BA1(0),
+				      DISPC_VID_BA1(1) };
+
+	dispc_write_reg(ba1_reg[plane], paddr);
+}
+
+static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y)
+{
+	const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION,
+				      DISPC_VID_POSITION(0),
+				      DISPC_VID_POSITION(1) };
+
+	u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0);
+	dispc_write_reg(pos_reg[plane], val);
+}
+
+static void _dispc_set_pic_size(enum omap_plane plane, int width, int height)
+{
+	const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE,
+				      DISPC_VID_PICTURE_SIZE(0),
+				      DISPC_VID_PICTURE_SIZE(1) };
+	u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
+	dispc_write_reg(siz_reg[plane], val);
+}
+
+static void _dispc_set_vid_size(enum omap_plane plane, int width, int height)
+{
+	u32 val;
+	const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0),
+				      DISPC_VID_SIZE(1) };
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
+	dispc_write_reg(vsi_reg[plane-1], val);
+}
+
+static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha)
+{
+
+	BUG_ON(plane == OMAP_DSS_VIDEO1);
+
+	if (plane == OMAP_DSS_GFX)
+		REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0);
+	else if (plane == OMAP_DSS_VIDEO2)
+		REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16);
+}
+
+static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc)
+{
+	const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC,
+				     DISPC_VID_PIXEL_INC(0),
+				     DISPC_VID_PIXEL_INC(1) };
+
+	dispc_write_reg(ri_reg[plane], inc);
+}
+
+static void _dispc_set_row_inc(enum omap_plane plane, s32 inc)
+{
+	const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC,
+				     DISPC_VID_ROW_INC(0),
+				     DISPC_VID_ROW_INC(1) };
+
+	dispc_write_reg(ri_reg[plane], inc);
+}
+
+static void _dispc_set_color_mode(enum omap_plane plane,
+		enum omap_color_mode color_mode)
+{
+	u32 m = 0;
+
+	switch (color_mode) {
+	case OMAP_DSS_COLOR_CLUT1:
+		m = 0x0; break;
+	case OMAP_DSS_COLOR_CLUT2:
+		m = 0x1; break;
+	case OMAP_DSS_COLOR_CLUT4:
+		m = 0x2; break;
+	case OMAP_DSS_COLOR_CLUT8:
+		m = 0x3; break;
+	case OMAP_DSS_COLOR_RGB12U:
+		m = 0x4; break;
+	case OMAP_DSS_COLOR_ARGB16:
+		m = 0x5; break;
+	case OMAP_DSS_COLOR_RGB16:
+		m = 0x6; break;
+	case OMAP_DSS_COLOR_RGB24U:
+		m = 0x8; break;
+	case OMAP_DSS_COLOR_RGB24P:
+		m = 0x9; break;
+	case OMAP_DSS_COLOR_YUV2:
+		m = 0xa; break;
+	case OMAP_DSS_COLOR_UYVY:
+		m = 0xb; break;
+	case OMAP_DSS_COLOR_ARGB32:
+		m = 0xc; break;
+	case OMAP_DSS_COLOR_RGBA32:
+		m = 0xd; break;
+	case OMAP_DSS_COLOR_RGBX32:
+		m = 0xe; break;
+	default:
+		BUG(); break;
+	}
+
+	REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1);
+}
+
+static void _dispc_set_channel_out(enum omap_plane plane,
+		enum omap_channel channel)
+{
+	int shift;
+	u32 val;
+
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		shift = 8;
+		break;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		shift = 16;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	val = dispc_read_reg(dispc_reg_att[plane]);
+	val = FLD_MOD(val, channel, shift, shift);
+	dispc_write_reg(dispc_reg_att[plane], val);
+}
+
+void dispc_set_burst_size(enum omap_plane plane,
+		enum omap_burst_size burst_size)
+{
+	int shift;
+	u32 val;
+
+	enable_clocks(1);
+
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		shift = 6;
+		break;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		shift = 14;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	val = dispc_read_reg(dispc_reg_att[plane]);
+	val = FLD_MOD(val, burst_size, shift+1, shift);
+	dispc_write_reg(dispc_reg_att[plane], val);
+
+	enable_clocks(0);
+}
+
+static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
+{
+	u32 val;
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	val = dispc_read_reg(dispc_reg_att[plane]);
+	val = FLD_MOD(val, enable, 9, 9);
+	dispc_write_reg(dispc_reg_att[plane], val);
+}
+
+void dispc_enable_replication(enum omap_plane plane, bool enable)
+{
+	int bit;
+
+	if (plane == OMAP_DSS_GFX)
+		bit = 5;
+	else
+		bit = 10;
+
+	enable_clocks(1);
+	REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit);
+	enable_clocks(0);
+}
+
+void dispc_set_lcd_size(u16 width, u16 height)
+{
+	u32 val;
+	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
+	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
+	enable_clocks(1);
+	dispc_write_reg(DISPC_SIZE_LCD, val);
+	enable_clocks(0);
+}
+
+void dispc_set_digit_size(u16 width, u16 height)
+{
+	u32 val;
+	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
+	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
+	enable_clocks(1);
+	dispc_write_reg(DISPC_SIZE_DIG, val);
+	enable_clocks(0);
+}
+
+static void dispc_read_plane_fifo_sizes(void)
+{
+	const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
+				      DISPC_VID_FIFO_SIZE_STATUS(0),
+				      DISPC_VID_FIFO_SIZE_STATUS(1) };
+	u32 size;
+	int plane;
+
+	enable_clocks(1);
+
+	for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) {
+		if (cpu_is_omap24xx())
+			size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0);
+		else if (cpu_is_omap34xx())
+			size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0);
+		else
+			BUG();
+
+		dispc.fifo_size[plane] = size;
+	}
+
+	enable_clocks(0);
+}
+
+u32 dispc_get_plane_fifo_size(enum omap_plane plane)
+{
+	return dispc.fifo_size[plane];
+}
+
+void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
+{
+	const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
+				       DISPC_VID_FIFO_THRESHOLD(0),
+				       DISPC_VID_FIFO_THRESHOLD(1) };
+	enable_clocks(1);
+
+	DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n",
+			plane,
+			REG_GET(ftrs_reg[plane], 11, 0),
+			REG_GET(ftrs_reg[plane], 27, 16),
+			low, high);
+
+	if (cpu_is_omap24xx())
+		dispc_write_reg(ftrs_reg[plane],
+				FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0));
+	else
+		dispc_write_reg(ftrs_reg[plane],
+				FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0));
+
+	enable_clocks(0);
+}
+
+void dispc_enable_fifomerge(bool enable)
+{
+	enable_clocks(1);
+
+	DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
+	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
+
+	enable_clocks(0);
+}
+
+static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc)
+{
+	u32 val;
+	const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0),
+				      DISPC_VID_FIR(1) };
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	if (cpu_is_omap24xx())
+		val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0);
+	else
+		val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0);
+	dispc_write_reg(fir_reg[plane-1], val);
+}
+
+static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu)
+{
+	u32 val;
+	const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0),
+				      DISPC_VID_ACCU0(1) };
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0);
+	dispc_write_reg(ac0_reg[plane-1], val);
+}
+
+static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
+{
+	u32 val;
+	const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0),
+				      DISPC_VID_ACCU1(1) };
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0);
+	dispc_write_reg(ac1_reg[plane-1], val);
+}
+
+
+static void _dispc_set_scaling(enum omap_plane plane,
+		u16 orig_width, u16 orig_height,
+		u16 out_width, u16 out_height,
+		bool ilace, bool five_taps,
+		bool fieldmode)
+{
+	int fir_hinc;
+	int fir_vinc;
+	int hscaleup, vscaleup;
+	int accu0 = 0;
+	int accu1 = 0;
+	u32 l;
+
+	BUG_ON(plane == OMAP_DSS_GFX);
+
+	hscaleup = orig_width <= out_width;
+	vscaleup = orig_height <= out_height;
+
+	_dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps);
+
+	if (!orig_width || orig_width == out_width)
+		fir_hinc = 0;
+	else
+		fir_hinc = 1024 * orig_width / out_width;
+
+	if (!orig_height || orig_height == out_height)
+		fir_vinc = 0;
+	else
+		fir_vinc = 1024 * orig_height / out_height;
+
+	_dispc_set_fir(plane, fir_hinc, fir_vinc);
+
+	l = dispc_read_reg(dispc_reg_att[plane]);
+	l &= ~((0x0f << 5) | (0x3 << 21));
+
+	l |= fir_hinc ? (1 << 5) : 0;
+	l |= fir_vinc ? (1 << 6) : 0;
+
+	l |= hscaleup ? 0 : (1 << 7);
+	l |= vscaleup ? 0 : (1 << 8);
+
+	l |= five_taps ? (1 << 21) : 0;
+	l |= five_taps ? (1 << 22) : 0;
+
+	dispc_write_reg(dispc_reg_att[plane], l);
+
+	/*
+	 * field 0 = even field = bottom field
+	 * field 1 = odd field = top field
+	 */
+	if (ilace && !fieldmode) {
+		accu1 = 0;
+		accu0 = (fir_vinc / 2) & 0x3ff;
+		if (accu0 >= 1024/2) {
+			accu1 = 1024/2;
+			accu0 -= accu1;
+		}
+	}
+
+	_dispc_set_vid_accu0(plane, 0, accu0);
+	_dispc_set_vid_accu1(plane, 0, accu1);
+}
+
+static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
+		bool mirroring, enum omap_color_mode color_mode)
+{
+	if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY) {
+		int vidrot = 0;
+
+		if (mirroring) {
+			switch (rotation) {
+			case 0:
+				vidrot = 2;
+				break;
+			case 1:
+				vidrot = 1;
+				break;
+			case 2:
+				vidrot = 0;
+				break;
+			case 3:
+				vidrot = 3;
+				break;
+			}
+		} else {
+			switch (rotation) {
+			case 0:
+				vidrot = 0;
+				break;
+			case 1:
+				vidrot = 1;
+				break;
+			case 2:
+				vidrot = 2;
+				break;
+			case 3:
+				vidrot = 3;
+				break;
+			}
+		}
+
+		REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12);
+
+		if (rotation == 1 || rotation == 3)
+			REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18);
+		else
+			REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18);
+	} else {
+		REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12);
+		REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18);
+	}
+}
+
+static s32 pixinc(int pixels, u8 ps)
+{
+	if (pixels == 1)
+		return 1;
+	else if (pixels > 1)
+		return 1 + (pixels - 1) * ps;
+	else if (pixels < 0)
+		return 1 - (-pixels + 1) * ps;
+	else
+		BUG();
+}
+
+static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
+		u16 screen_width,
+		u16 width, u16 height,
+		enum omap_color_mode color_mode, bool fieldmode,
+		unsigned int field_offset,
+		unsigned *offset0, unsigned *offset1,
+		s32 *row_inc, s32 *pix_inc)
+{
+	u8 ps;
+
+	switch (color_mode) {
+	case OMAP_DSS_COLOR_RGB16:
+	case OMAP_DSS_COLOR_ARGB16:
+		ps = 2;
+		break;
+
+	case OMAP_DSS_COLOR_RGB24P:
+		ps = 3;
+		break;
+
+	case OMAP_DSS_COLOR_RGB24U:
+	case OMAP_DSS_COLOR_ARGB32:
+	case OMAP_DSS_COLOR_RGBA32:
+	case OMAP_DSS_COLOR_RGBX32:
+	case OMAP_DSS_COLOR_YUV2:
+	case OMAP_DSS_COLOR_UYVY:
+		ps = 4;
+		break;
+
+	default:
+		BUG();
+		return;
+	}
+
+	DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
+			width, height);
+
+	/*
+	 * field 0 = even field = bottom field
+	 * field 1 = odd field = top field
+	 */
+	switch (rotation + mirror * 4) {
+	case 0:
+	case 2:
+		/*
+		 * If the pixel format is YUV or UYVY divide the width
+		 * of the image by 2 for 0 and 180 degree rotation.
+		 */
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			width = width >> 1;
+	case 1:
+	case 3:
+		*offset1 = 0;
+		if (field_offset)
+			*offset0 = field_offset * screen_width * ps;
+		else
+			*offset0 = 0;
+
+		*row_inc = pixinc(1 + (screen_width - width) +
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(1, ps);
+		break;
+
+	case 4:
+	case 6:
+		/* If the pixel format is YUV or UYVY divide the width
+		 * of the image by 2  for 0 degree and 180 degree
+		 */
+		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY)
+			width = width >> 1;
+	case 5:
+	case 7:
+		*offset1 = 0;
+		if (field_offset)
+			*offset0 = field_offset * screen_width * ps;
+		else
+			*offset0 = 0;
+		*row_inc = pixinc(1 - (screen_width + width) -
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(1, ps);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+		u16 screen_width,
+		u16 width, u16 height,
+		enum omap_color_mode color_mode, bool fieldmode,
+		unsigned int field_offset,
+		unsigned *offset0, unsigned *offset1,
+		s32 *row_inc, s32 *pix_inc)
+{
+	u8 ps;
+	u16 fbw, fbh;
+
+	switch (color_mode) {
+	case OMAP_DSS_COLOR_RGB16:
+	case OMAP_DSS_COLOR_ARGB16:
+		ps = 2;
+		break;
+
+	case OMAP_DSS_COLOR_RGB24P:
+		ps = 3;
+		break;
+
+	case OMAP_DSS_COLOR_RGB24U:
+	case OMAP_DSS_COLOR_ARGB32:
+	case OMAP_DSS_COLOR_RGBA32:
+	case OMAP_DSS_COLOR_RGBX32:
+		ps = 4;
+		break;
+
+	case OMAP_DSS_COLOR_YUV2:
+	case OMAP_DSS_COLOR_UYVY:
+		ps = 2;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
+			width, height);
+
+	/* width & height are overlay sizes, convert to fb sizes */
+
+	if (rotation == 0 || rotation == 2) {
+		fbw = width;
+		fbh = height;
+	} else {
+		fbw = height;
+		fbh = width;
+	}
+
+	/*
+	 * field 0 = even field = bottom field
+	 * field 1 = odd field = top field
+	 */
+	switch (rotation + mirror * 4) {
+	case 0:
+		*offset1 = 0;
+		if (field_offset)
+			*offset0 = *offset1 + field_offset * screen_width * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(1 + (screen_width - fbw) +
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(1, ps);
+		break;
+	case 1:
+		*offset1 = screen_width * (fbh - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 + field_offset * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(screen_width * (fbh - 1) + 1 +
+				(fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(-screen_width, ps);
+		break;
+	case 2:
+		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 - field_offset * screen_width * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(-1 -
+				(screen_width - fbw) -
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(-1, ps);
+		break;
+	case 3:
+		*offset1 = (fbw - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 - field_offset * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
+				(fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(screen_width, ps);
+		break;
+
+	/* mirroring */
+	case 0 + 4:
+		*offset1 = (fbw - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 + field_offset * screen_width * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(screen_width * 2 - 1 +
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(-1, ps);
+		break;
+
+	case 1 + 4:
+		*offset1 = 0;
+		if (field_offset)
+			*offset0 = *offset1 + field_offset * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
+				(fieldmode ? 1 : 0),
+				ps);
+		*pix_inc = pixinc(screen_width, ps);
+		break;
+
+	case 2 + 4:
+		*offset1 = screen_width * (fbh - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 - field_offset * screen_width * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(1 - screen_width * 2 -
+				(fieldmode ? screen_width : 0),
+				ps);
+		*pix_inc = pixinc(1, ps);
+		break;
+
+	case 3 + 4:
+		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
+		if (field_offset)
+			*offset0 = *offset1 - field_offset * ps;
+		else
+			*offset0 = *offset1;
+		*row_inc = pixinc(screen_width * (fbh - 1) - 1 -
+				(fieldmode ? 1 : 0),
+				ps);
+		*pix_inc = pixinc(-screen_width, ps);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static unsigned long calc_fclk_five_taps(u16 width, u16 height,
+		u16 out_width, u16 out_height, enum omap_color_mode color_mode)
+{
+	u32 fclk = 0;
+	/* FIXME venc pclk? */
+	u64 tmp, pclk = dispc_pclk_rate();
+
+	if (height > out_height) {
+		/* FIXME get real display PPL */
+		unsigned int ppl = 800;
+
+		tmp = pclk * height * out_width;
+		do_div(tmp, 2 * out_height * ppl);
+		fclk = tmp;
+
+		if (height > 2 * out_height && ppl != out_width) {
+			tmp = pclk * (height - 2 * out_height) * out_width;
+			do_div(tmp, 2 * out_height * (ppl - out_width));
+			fclk = max(fclk, (u32) tmp);
+		}
+	}
+
+	if (width > out_width) {
+		tmp = pclk * width;
+		do_div(tmp, out_width);
+		fclk = max(fclk, (u32) tmp);
+
+		if (color_mode == OMAP_DSS_COLOR_RGB24U)
+			fclk <<= 1;
+	}
+
+	return fclk;
+}
+
+static unsigned long calc_fclk(u16 width, u16 height,
+		u16 out_width, u16 out_height)
+{
+	unsigned int hf, vf;
+
+	/*
+	 * FIXME how to determine the 'A' factor
+	 * for the no downscaling case ?
+	 */
+
+	if (width > 3 * out_width)
+		hf = 4;
+	else if (width > 2 * out_width)
+		hf = 3;
+	else if (width > out_width)
+		hf = 2;
+	else
+		hf = 1;
+
+	if (height > out_height)
+		vf = 2;
+	else
+		vf = 1;
+
+	/* FIXME venc pclk? */
+	return dispc_pclk_rate() * vf * hf;
+}
+
+void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out)
+{
+	enable_clocks(1);
+	_dispc_set_channel_out(plane, channel_out);
+	enable_clocks(0);
+}
+
+static int _dispc_setup_plane(enum omap_plane plane,
+		u32 paddr, u16 screen_width,
+		u16 pos_x, u16 pos_y,
+		u16 width, u16 height,
+		u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode,
+		bool ilace,
+		enum omap_dss_rotation_type rotation_type,
+		u8 rotation, int mirror,
+		u8 global_alpha)
+{
+	const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
+	bool five_taps = 0;
+	bool fieldmode = 0;
+	int cconv = 0;
+	unsigned offset0, offset1;
+	s32 row_inc;
+	s32 pix_inc;
+	u16 frame_height = height;
+	unsigned int field_offset = 0;
+
+	if (paddr == 0)
+		return -EINVAL;
+
+	if (ilace && height == out_height)
+		fieldmode = 1;
+
+	if (ilace) {
+		if (fieldmode)
+			height /= 2;
+		pos_y /= 2;
+		out_height /= 2;
+
+		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
+				"out_height %d\n",
+				height, pos_y, out_height);
+	}
+
+	if (plane == OMAP_DSS_GFX) {
+		if (width != out_width || height != out_height)
+			return -EINVAL;
+
+		switch (color_mode) {
+		case OMAP_DSS_COLOR_ARGB16:
+		case OMAP_DSS_COLOR_RGB16:
+		case OMAP_DSS_COLOR_RGB24P:
+		case OMAP_DSS_COLOR_RGB24U:
+		case OMAP_DSS_COLOR_ARGB32:
+		case OMAP_DSS_COLOR_RGBA32:
+		case OMAP_DSS_COLOR_RGBX32:
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	} else {
+		/* video plane */
+
+		unsigned long fclk = 0;
+
+		if (out_width < width / maxdownscale ||
+		   out_width > width * 8)
+			return -EINVAL;
+
+		if (out_height < height / maxdownscale ||
+		   out_height > height * 8)
+			return -EINVAL;
+
+		switch (color_mode) {
+		case OMAP_DSS_COLOR_RGB16:
+		case OMAP_DSS_COLOR_RGB24P:
+		case OMAP_DSS_COLOR_RGB24U:
+		case OMAP_DSS_COLOR_RGBX32:
+			break;
+
+		case OMAP_DSS_COLOR_ARGB16:
+		case OMAP_DSS_COLOR_ARGB32:
+		case OMAP_DSS_COLOR_RGBA32:
+			if (plane == OMAP_DSS_VIDEO1)
+				return -EINVAL;
+			break;
+
+		case OMAP_DSS_COLOR_YUV2:
+		case OMAP_DSS_COLOR_UYVY:
+			cconv = 1;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		/* Must use 5-tap filter? */
+		five_taps = height > out_height * 2;
+
+		if (!five_taps) {
+			fclk = calc_fclk(width, height,
+					out_width, out_height);
+
+			/* Try 5-tap filter if 3-tap fclk is too high */
+			if (cpu_is_omap34xx() && height > out_height &&
+					fclk > dispc_fclk_rate())
+				five_taps = true;
+		}
+
+		if (width > (2048 >> five_taps))
+			return -EINVAL;
+
+		if (five_taps)
+			fclk = calc_fclk_five_taps(width, height,
+					out_width, out_height, color_mode);
+
+		DSSDBG("required fclk rate = %lu Hz\n", fclk);
+		DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+
+		if (fclk > dispc_fclk_rate()) {
+			DSSERR("failed to set up scaling, "
+					"required fclk rate = %lu Hz, "
+					"current fclk rate = %lu Hz\n",
+					fclk, dispc_fclk_rate());
+			return -EINVAL;
+		}
+	}
+
+	if (ilace && !fieldmode) {
+		/*
+		 * when downscaling the bottom field may have to start several
+		 * source lines below the top field. Unfortunately ACCUI
+		 * registers will only hold the fractional part of the offset
+		 * so the integer part must be added to the base address of the
+		 * bottom field.
+		 */
+		if (!height || height == out_height)
+			field_offset = 0;
+		else
+			field_offset = height / out_height / 2;
+	}
+
+	/* Fields are independent but interleaved in memory. */
+	if (fieldmode)
+		field_offset = 1;
+
+	if (rotation_type == OMAP_DSS_ROT_DMA)
+		calc_dma_rotation_offset(rotation, mirror,
+				screen_width, width, frame_height, color_mode,
+				fieldmode, field_offset,
+				&offset0, &offset1, &row_inc, &pix_inc);
+	else
+		calc_vrfb_rotation_offset(rotation, mirror,
+				screen_width, width, frame_height, color_mode,
+				fieldmode, field_offset,
+				&offset0, &offset1, &row_inc, &pix_inc);
+
+	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
+			offset0, offset1, row_inc, pix_inc);
+
+	_dispc_set_color_mode(plane, color_mode);
+
+	_dispc_set_plane_ba0(plane, paddr + offset0);
+	_dispc_set_plane_ba1(plane, paddr + offset1);
+
+	_dispc_set_row_inc(plane, row_inc);
+	_dispc_set_pix_inc(plane, pix_inc);
+
+	DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height,
+			out_width, out_height);
+
+	_dispc_set_plane_pos(plane, pos_x, pos_y);
+
+	_dispc_set_pic_size(plane, width, height);
+
+	if (plane != OMAP_DSS_GFX) {
+		_dispc_set_scaling(plane, width, height,
+				   out_width, out_height,
+				   ilace, five_taps, fieldmode);
+		_dispc_set_vid_size(plane, out_width, out_height);
+		_dispc_set_vid_color_conv(plane, cconv);
+	}
+
+	_dispc_set_rotation_attrs(plane, rotation, mirror, color_mode);
+
+	if (plane != OMAP_DSS_VIDEO1)
+		_dispc_setup_global_alpha(plane, global_alpha);
+
+	return 0;
+}
+
+static void _dispc_enable_plane(enum omap_plane plane, bool enable)
+{
+	REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0);
+}
+
+static void dispc_disable_isr(void *data, u32 mask)
+{
+	struct completion *compl = data;
+	complete(compl);
+}
+
+static void _enable_lcd_out(bool enable)
+{
+	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
+}
+
+void dispc_enable_lcd_out(bool enable)
+{
+	struct completion frame_done_completion;
+	bool is_on;
+	int r;
+
+	enable_clocks(1);
+
+	/* When we disable LCD output, we need to wait until frame is done.
+	 * Otherwise the DSS is still working, and turning off the clocks
+	 * prevents DSS from going to OFF mode */
+	is_on = REG_GET(DISPC_CONTROL, 0, 0);
+
+	if (!enable && is_on) {
+		init_completion(&frame_done_completion);
+
+		r = omap_dispc_register_isr(dispc_disable_isr,
+				&frame_done_completion,
+				DISPC_IRQ_FRAMEDONE);
+
+		if (r)
+			DSSERR("failed to register FRAMEDONE isr\n");
+	}
+
+	_enable_lcd_out(enable);
+
+	if (!enable && is_on) {
+		if (!wait_for_completion_timeout(&frame_done_completion,
+					msecs_to_jiffies(100)))
+			DSSERR("timeout waiting for FRAME DONE\n");
+
+		r = omap_dispc_unregister_isr(dispc_disable_isr,
+				&frame_done_completion,
+				DISPC_IRQ_FRAMEDONE);
+
+		if (r)
+			DSSERR("failed to unregister FRAMEDONE isr\n");
+	}
+
+	enable_clocks(0);
+}
+
+static void _enable_digit_out(bool enable)
+{
+	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
+}
+
+void dispc_enable_digit_out(bool enable)
+{
+	struct completion frame_done_completion;
+	int r;
+
+	enable_clocks(1);
+
+	if (REG_GET(DISPC_CONTROL, 1, 1) == enable) {
+		enable_clocks(0);
+		return;
+	}
+
+	if (enable) {
+		unsigned long flags;
+		/* When we enable digit output, we'll get an extra digit
+		 * sync lost interrupt, that we need to ignore */
+		spin_lock_irqsave(&dispc.irq_lock, flags);
+		dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT;
+		_omap_dispc_set_irqs();
+		spin_unlock_irqrestore(&dispc.irq_lock, flags);
+	}
+
+	/* When we disable digit output, we need to wait until fields are done.
+	 * Otherwise the DSS is still working, and turning off the clocks
+	 * prevents DSS from going to OFF mode. And when enabling, we need to
+	 * wait for the extra sync losts */
+	init_completion(&frame_done_completion);
+
+	r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion,
+			DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
+	if (r)
+		DSSERR("failed to register EVSYNC isr\n");
+
+	_enable_digit_out(enable);
+
+	/* XXX I understand from TRM that we should only wait for the
+	 * current field to complete. But it seems we have to wait
+	 * for both fields */
+	if (!wait_for_completion_timeout(&frame_done_completion,
+				msecs_to_jiffies(100)))
+		DSSERR("timeout waiting for EVSYNC\n");
+
+	if (!wait_for_completion_timeout(&frame_done_completion,
+				msecs_to_jiffies(100)))
+		DSSERR("timeout waiting for EVSYNC\n");
+
+	r = omap_dispc_unregister_isr(dispc_disable_isr,
+			&frame_done_completion,
+			DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
+	if (r)
+		DSSERR("failed to unregister EVSYNC isr\n");
+
+	if (enable) {
+		unsigned long flags;
+		spin_lock_irqsave(&dispc.irq_lock, flags);
+		dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
+		dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
+		_omap_dispc_set_irqs();
+		spin_unlock_irqrestore(&dispc.irq_lock, flags);
+	}
+
+	enable_clocks(0);
+}
+
+void dispc_lcd_enable_signal_polarity(bool act_high)
+{
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29);
+	enable_clocks(0);
+}
+
+void dispc_lcd_enable_signal(bool enable)
+{
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28);
+	enable_clocks(0);
+}
+
+void dispc_pck_free_enable(bool enable)
+{
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
+	enable_clocks(0);
+}
+
+void dispc_enable_fifohandcheck(bool enable)
+{
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16);
+	enable_clocks(0);
+}
+
+
+void dispc_set_lcd_display_type(enum omap_lcd_display_type type)
+{
+	int mode;
+
+	switch (type) {
+	case OMAP_DSS_LCD_DISPLAY_STN:
+		mode = 0;
+		break;
+
+	case OMAP_DSS_LCD_DISPLAY_TFT:
+		mode = 1;
+		break;
+
+	default:
+		BUG();
+		return;
+	}
+
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3);
+	enable_clocks(0);
+}
+
+void dispc_set_loadmode(enum omap_dss_load_mode mode)
+{
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1);
+	enable_clocks(0);
+}
+
+
+void dispc_set_default_color(enum omap_channel channel, u32 color)
+{
+	const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
+				DISPC_DEFAULT_COLOR1 };
+
+	enable_clocks(1);
+	dispc_write_reg(def_reg[channel], color);
+	enable_clocks(0);
+}
+
+u32 dispc_get_default_color(enum omap_channel channel)
+{
+	const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
+				DISPC_DEFAULT_COLOR1 };
+	u32 l;
+
+	BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT &&
+	       channel != OMAP_DSS_CHANNEL_LCD);
+
+	enable_clocks(1);
+	l = dispc_read_reg(def_reg[channel]);
+	enable_clocks(0);
+
+	return l;
+}
+
+void dispc_set_trans_key(enum omap_channel ch,
+		enum omap_dss_trans_key_type type,
+		u32 trans_key)
+{
+	const struct dispc_reg tr_reg[] = {
+		DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 };
+
+	enable_clocks(1);
+	if (ch == OMAP_DSS_CHANNEL_LCD)
+		REG_FLD_MOD(DISPC_CONFIG, type, 11, 11);
+	else /* OMAP_DSS_CHANNEL_DIGIT */
+		REG_FLD_MOD(DISPC_CONFIG, type, 13, 13);
+
+	dispc_write_reg(tr_reg[ch], trans_key);
+	enable_clocks(0);
+}
+
+void dispc_get_trans_key(enum omap_channel ch,
+		enum omap_dss_trans_key_type *type,
+		u32 *trans_key)
+{
+	const struct dispc_reg tr_reg[] = {
+		DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 };
+
+	enable_clocks(1);
+	if (type) {
+		if (ch == OMAP_DSS_CHANNEL_LCD)
+			*type = REG_GET(DISPC_CONFIG, 11, 11);
+		else if (ch == OMAP_DSS_CHANNEL_DIGIT)
+			*type = REG_GET(DISPC_CONFIG, 13, 13);
+		else
+			BUG();
+	}
+
+	if (trans_key)
+		*trans_key = dispc_read_reg(tr_reg[ch]);
+	enable_clocks(0);
+}
+
+void dispc_enable_trans_key(enum omap_channel ch, bool enable)
+{
+	enable_clocks(1);
+	if (ch == OMAP_DSS_CHANNEL_LCD)
+		REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10);
+	else /* OMAP_DSS_CHANNEL_DIGIT */
+		REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12);
+	enable_clocks(0);
+}
+void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
+{
+	enable_clocks(1);
+	if (ch == OMAP_DSS_CHANNEL_LCD)
+		REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
+	else /* OMAP_DSS_CHANNEL_DIGIT */
+		REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
+	enable_clocks(0);
+}
+bool dispc_alpha_blending_enabled(enum omap_channel ch)
+{
+	bool enabled;
+
+	enable_clocks(1);
+	if (ch == OMAP_DSS_CHANNEL_LCD)
+		enabled = REG_GET(DISPC_CONFIG, 18, 18);
+	else if (ch == OMAP_DSS_CHANNEL_DIGIT)
+		enabled = REG_GET(DISPC_CONFIG, 18, 18);
+	else
+		BUG();
+	enable_clocks(0);
+
+	return enabled;
+
+}
+
+
+bool dispc_trans_key_enabled(enum omap_channel ch)
+{
+	bool enabled;
+
+	enable_clocks(1);
+	if (ch == OMAP_DSS_CHANNEL_LCD)
+		enabled = REG_GET(DISPC_CONFIG, 10, 10);
+	else if (ch == OMAP_DSS_CHANNEL_DIGIT)
+		enabled = REG_GET(DISPC_CONFIG, 12, 12);
+	else
+		BUG();
+	enable_clocks(0);
+
+	return enabled;
+}
+
+
+void dispc_set_tft_data_lines(u8 data_lines)
+{
+	int code;
+
+	switch (data_lines) {
+	case 12:
+		code = 0;
+		break;
+	case 16:
+		code = 1;
+		break;
+	case 18:
+		code = 2;
+		break;
+	case 24:
+		code = 3;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	enable_clocks(1);
+	REG_FLD_MOD(DISPC_CONTROL, code, 9, 8);
+	enable_clocks(0);
+}
+
+void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode)
+{
+	u32 l;
+	int stallmode;
+	int gpout0 = 1;
+	int gpout1;
+
+	switch (mode) {
+	case OMAP_DSS_PARALLELMODE_BYPASS:
+		stallmode = 0;
+		gpout1 = 1;
+		break;
+
+	case OMAP_DSS_PARALLELMODE_RFBI:
+		stallmode = 1;
+		gpout1 = 0;
+		break;
+
+	case OMAP_DSS_PARALLELMODE_DSI:
+		stallmode = 1;
+		gpout1 = 1;
+		break;
+
+	default:
+		BUG();
+		return;
+	}
+
+	enable_clocks(1);
+
+	l = dispc_read_reg(DISPC_CONTROL);
+
+	l = FLD_MOD(l, stallmode, 11, 11);
+	l = FLD_MOD(l, gpout0, 15, 15);
+	l = FLD_MOD(l, gpout1, 16, 16);
+
+	dispc_write_reg(DISPC_CONTROL, l);
+
+	enable_clocks(0);
+}
+
+static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
+		int vsw, int vfp, int vbp)
+{
+	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
+		if (hsw < 1 || hsw > 64 ||
+				hfp < 1 || hfp > 256 ||
+				hbp < 1 || hbp > 256 ||
+				vsw < 1 || vsw > 64 ||
+				vfp < 0 || vfp > 255 ||
+				vbp < 0 || vbp > 255)
+			return false;
+	} else {
+		if (hsw < 1 || hsw > 256 ||
+				hfp < 1 || hfp > 4096 ||
+				hbp < 1 || hbp > 4096 ||
+				vsw < 1 || vsw > 256 ||
+				vfp < 0 || vfp > 4095 ||
+				vbp < 0 || vbp > 4095)
+			return false;
+	}
+
+	return true;
+}
+
+bool dispc_lcd_timings_ok(struct omap_video_timings *timings)
+{
+	return _dispc_lcd_timings_ok(timings->hsw, timings->hfp,
+			timings->hbp, timings->vsw,
+			timings->vfp, timings->vbp);
+}
+
+static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp,
+				   int vsw, int vfp, int vbp)
+{
+	u32 timing_h, timing_v;
+
+	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
+		timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
+			FLD_VAL(hbp-1, 27, 20);
+
+		timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) |
+			FLD_VAL(vbp, 27, 20);
+	} else {
+		timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) |
+			FLD_VAL(hbp-1, 31, 20);
+
+		timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) |
+			FLD_VAL(vbp, 31, 20);
+	}
+
+	enable_clocks(1);
+	dispc_write_reg(DISPC_TIMING_H, timing_h);
+	dispc_write_reg(DISPC_TIMING_V, timing_v);
+	enable_clocks(0);
+}
+
+/* change name to mode? */
+void dispc_set_lcd_timings(struct omap_video_timings *timings)
+{
+	unsigned xtot, ytot;
+	unsigned long ht, vt;
+
+	if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp,
+				timings->hbp, timings->vsw,
+				timings->vfp, timings->vbp))
+		BUG();
+
+	_dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp,
+			timings->vsw, timings->vfp, timings->vbp);
+
+	dispc_set_lcd_size(timings->x_res, timings->y_res);
+
+	xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp;
+	ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp;
+
+	ht = (timings->pixel_clock * 1000) / xtot;
+	vt = (timings->pixel_clock * 1000) / xtot / ytot;
+
+	DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res);
+	DSSDBG("pck %u\n", timings->pixel_clock);
+	DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
+			timings->hsw, timings->hfp, timings->hbp,
+			timings->vsw, timings->vfp, timings->vbp);
+
+	DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
+}
+
+void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div)
+{
+	BUG_ON(lck_div < 1);
+	BUG_ON(pck_div < 2);
+
+	enable_clocks(1);
+	dispc_write_reg(DISPC_DIVISOR,
+			FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
+	enable_clocks(0);
+}
+
+static void dispc_get_lcd_divisor(int *lck_div, int *pck_div)
+{
+	u32 l;
+	l = dispc_read_reg(DISPC_DIVISOR);
+	*lck_div = FLD_GET(l, 23, 16);
+	*pck_div = FLD_GET(l, 7, 0);
+}
+
+unsigned long dispc_fclk_rate(void)
+{
+	unsigned long r = 0;
+
+	if (dss_get_dispc_clk_source() == 0)
+		r = dss_clk_get_rate(DSS_CLK_FCK1);
+	else
+#ifdef CONFIG_OMAP2_DSS_DSI
+		r = dsi_get_dsi1_pll_rate();
+#else
+	BUG();
+#endif
+	return r;
+}
+
+unsigned long dispc_lclk_rate(void)
+{
+	int lcd;
+	unsigned long r;
+	u32 l;
+
+	l = dispc_read_reg(DISPC_DIVISOR);
+
+	lcd = FLD_GET(l, 23, 16);
+
+	r = dispc_fclk_rate();
+
+	return r / lcd;
+}
+
+unsigned long dispc_pclk_rate(void)
+{
+	int lcd, pcd;
+	unsigned long r;
+	u32 l;
+
+	l = dispc_read_reg(DISPC_DIVISOR);
+
+	lcd = FLD_GET(l, 23, 16);
+	pcd = FLD_GET(l, 7, 0);
+
+	r = dispc_fclk_rate();
+
+	return r / lcd / pcd;
+}
+
+void dispc_dump_clocks(struct seq_file *s)
+{
+	int lcd, pcd;
+
+	enable_clocks(1);
+
+	dispc_get_lcd_divisor(&lcd, &pcd);
+
+	seq_printf(s, "- dispc -\n");
+
+	seq_printf(s, "dispc fclk source = %s\n",
+			dss_get_dispc_clk_source() == 0 ?
+			"dss1_alwon_fclk" : "dsi1_pll_fclk");
+
+	seq_printf(s, "pixel clk = %lu / %d / %d = %lu\n",
+			dispc_fclk_rate(),
+			lcd, pcd,
+			dispc_pclk_rate());
+
+	enable_clocks(0);
+}
+
+void dispc_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r))
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	DUMPREG(DISPC_REVISION);
+	DUMPREG(DISPC_SYSCONFIG);
+	DUMPREG(DISPC_SYSSTATUS);
+	DUMPREG(DISPC_IRQSTATUS);
+	DUMPREG(DISPC_IRQENABLE);
+	DUMPREG(DISPC_CONTROL);
+	DUMPREG(DISPC_CONFIG);
+	DUMPREG(DISPC_CAPABLE);
+	DUMPREG(DISPC_DEFAULT_COLOR0);
+	DUMPREG(DISPC_DEFAULT_COLOR1);
+	DUMPREG(DISPC_TRANS_COLOR0);
+	DUMPREG(DISPC_TRANS_COLOR1);
+	DUMPREG(DISPC_LINE_STATUS);
+	DUMPREG(DISPC_LINE_NUMBER);
+	DUMPREG(DISPC_TIMING_H);
+	DUMPREG(DISPC_TIMING_V);
+	DUMPREG(DISPC_POL_FREQ);
+	DUMPREG(DISPC_DIVISOR);
+	DUMPREG(DISPC_GLOBAL_ALPHA);
+	DUMPREG(DISPC_SIZE_DIG);
+	DUMPREG(DISPC_SIZE_LCD);
+
+	DUMPREG(DISPC_GFX_BA0);
+	DUMPREG(DISPC_GFX_BA1);
+	DUMPREG(DISPC_GFX_POSITION);
+	DUMPREG(DISPC_GFX_SIZE);
+	DUMPREG(DISPC_GFX_ATTRIBUTES);
+	DUMPREG(DISPC_GFX_FIFO_THRESHOLD);
+	DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS);
+	DUMPREG(DISPC_GFX_ROW_INC);
+	DUMPREG(DISPC_GFX_PIXEL_INC);
+	DUMPREG(DISPC_GFX_WINDOW_SKIP);
+	DUMPREG(DISPC_GFX_TABLE_BA);
+
+	DUMPREG(DISPC_DATA_CYCLE1);
+	DUMPREG(DISPC_DATA_CYCLE2);
+	DUMPREG(DISPC_DATA_CYCLE3);
+
+	DUMPREG(DISPC_CPR_COEF_R);
+	DUMPREG(DISPC_CPR_COEF_G);
+	DUMPREG(DISPC_CPR_COEF_B);
+
+	DUMPREG(DISPC_GFX_PRELOAD);
+
+	DUMPREG(DISPC_VID_BA0(0));
+	DUMPREG(DISPC_VID_BA1(0));
+	DUMPREG(DISPC_VID_POSITION(0));
+	DUMPREG(DISPC_VID_SIZE(0));
+	DUMPREG(DISPC_VID_ATTRIBUTES(0));
+	DUMPREG(DISPC_VID_FIFO_THRESHOLD(0));
+	DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0));
+	DUMPREG(DISPC_VID_ROW_INC(0));
+	DUMPREG(DISPC_VID_PIXEL_INC(0));
+	DUMPREG(DISPC_VID_FIR(0));
+	DUMPREG(DISPC_VID_PICTURE_SIZE(0));
+	DUMPREG(DISPC_VID_ACCU0(0));
+	DUMPREG(DISPC_VID_ACCU1(0));
+
+	DUMPREG(DISPC_VID_BA0(1));
+	DUMPREG(DISPC_VID_BA1(1));
+	DUMPREG(DISPC_VID_POSITION(1));
+	DUMPREG(DISPC_VID_SIZE(1));
+	DUMPREG(DISPC_VID_ATTRIBUTES(1));
+	DUMPREG(DISPC_VID_FIFO_THRESHOLD(1));
+	DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1));
+	DUMPREG(DISPC_VID_ROW_INC(1));
+	DUMPREG(DISPC_VID_PIXEL_INC(1));
+	DUMPREG(DISPC_VID_FIR(1));
+	DUMPREG(DISPC_VID_PICTURE_SIZE(1));
+	DUMPREG(DISPC_VID_ACCU0(1));
+	DUMPREG(DISPC_VID_ACCU1(1));
+
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_H(0, 7));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7));
+	DUMPREG(DISPC_VID_CONV_COEF(0, 0));
+	DUMPREG(DISPC_VID_CONV_COEF(0, 1));
+	DUMPREG(DISPC_VID_CONV_COEF(0, 2));
+	DUMPREG(DISPC_VID_CONV_COEF(0, 3));
+	DUMPREG(DISPC_VID_CONV_COEF(0, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_V(0, 7));
+
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_H(1, 7));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7));
+	DUMPREG(DISPC_VID_CONV_COEF(1, 0));
+	DUMPREG(DISPC_VID_CONV_COEF(1, 1));
+	DUMPREG(DISPC_VID_CONV_COEF(1, 2));
+	DUMPREG(DISPC_VID_CONV_COEF(1, 3));
+	DUMPREG(DISPC_VID_CONV_COEF(1, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 0));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 1));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 2));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 3));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 4));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 5));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 6));
+	DUMPREG(DISPC_VID_FIR_COEF_V(1, 7));
+
+	DUMPREG(DISPC_VID_PRELOAD(0));
+	DUMPREG(DISPC_VID_PRELOAD(1));
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc,
+				bool ihs, bool ivs, u8 acbi, u8 acb)
+{
+	u32 l = 0;
+
+	DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n",
+			onoff, rf, ieo, ipc, ihs, ivs, acbi, acb);
+
+	l |= FLD_VAL(onoff, 17, 17);
+	l |= FLD_VAL(rf, 16, 16);
+	l |= FLD_VAL(ieo, 15, 15);
+	l |= FLD_VAL(ipc, 14, 14);
+	l |= FLD_VAL(ihs, 13, 13);
+	l |= FLD_VAL(ivs, 12, 12);
+	l |= FLD_VAL(acbi, 11, 8);
+	l |= FLD_VAL(acb, 7, 0);
+
+	enable_clocks(1);
+	dispc_write_reg(DISPC_POL_FREQ, l);
+	enable_clocks(0);
+}
+
+void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb)
+{
+	_dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0,
+			(config & OMAP_DSS_LCD_RF) != 0,
+			(config & OMAP_DSS_LCD_IEO) != 0,
+			(config & OMAP_DSS_LCD_IPC) != 0,
+			(config & OMAP_DSS_LCD_IHS) != 0,
+			(config & OMAP_DSS_LCD_IVS) != 0,
+			acbi, acb);
+}
+
+void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
+		u16 *lck_div, u16 *pck_div)
+{
+	u16 pcd_min = is_tft ? 2 : 3;
+	unsigned long best_pck;
+	u16 best_ld, cur_ld;
+	u16 best_pd, cur_pd;
+
+	best_pck = 0;
+	best_ld = 0;
+	best_pd = 0;
+
+	for (cur_ld = 1; cur_ld <= 255; ++cur_ld) {
+		unsigned long lck = fck / cur_ld;
+
+		for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) {
+			unsigned long pck = lck / cur_pd;
+			long old_delta = abs(best_pck - req_pck);
+			long new_delta = abs(pck - req_pck);
+
+			if (best_pck == 0 || new_delta < old_delta) {
+				best_pck = pck;
+				best_ld = cur_ld;
+				best_pd = cur_pd;
+
+				if (pck == req_pck)
+					goto found;
+			}
+
+			if (pck < req_pck)
+				break;
+		}
+
+		if (lck / pcd_min < req_pck)
+			break;
+	}
+
+found:
+	*lck_div = best_ld;
+	*pck_div = best_pd;
+}
+
+int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
+		struct dispc_clock_info *cinfo)
+{
+	unsigned long prate;
+	struct dispc_clock_info cur, best;
+	int match = 0;
+	int min_fck_per_pck;
+	unsigned long fck_rate = dss_clk_get_rate(DSS_CLK_FCK1);
+
+	if (cpu_is_omap34xx())
+		prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
+	else
+		prate = 0;
+
+	if (req_pck == dispc.cache_req_pck &&
+			((cpu_is_omap34xx() && prate == dispc.cache_prate) ||
+			 dispc.cache_cinfo.fck == fck_rate)) {
+		DSSDBG("dispc clock info found from cache.\n");
+		*cinfo = dispc.cache_cinfo;
+		return 0;
+	}
+
+	min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
+
+	if (min_fck_per_pck &&
+		req_pck * min_fck_per_pck > DISPC_MAX_FCK) {
+		DSSERR("Requested pixel clock not possible with the current "
+				"OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
+				"the constraint off.\n");
+		min_fck_per_pck = 0;
+	}
+
+retry:
+	memset(&cur, 0, sizeof(cur));
+	memset(&best, 0, sizeof(best));
+
+	if (cpu_is_omap24xx()) {
+		/* XXX can we change the clock on omap2? */
+		cur.fck = dss_clk_get_rate(DSS_CLK_FCK1);
+		cur.fck_div = 1;
+
+		match = 1;
+
+		find_lck_pck_divs(is_tft, req_pck, cur.fck,
+				&cur.lck_div, &cur.pck_div);
+
+		cur.lck = cur.fck / cur.lck_div;
+		cur.pck = cur.lck / cur.pck_div;
+
+		best = cur;
+
+		goto found;
+	} else if (cpu_is_omap34xx()) {
+		for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) {
+			cur.fck = prate / cur.fck_div * 2;
+
+			if (cur.fck > DISPC_MAX_FCK)
+				continue;
+
+			if (min_fck_per_pck &&
+					cur.fck < req_pck * min_fck_per_pck)
+				continue;
+
+			match = 1;
+
+			find_lck_pck_divs(is_tft, req_pck, cur.fck,
+					&cur.lck_div, &cur.pck_div);
+
+			cur.lck = cur.fck / cur.lck_div;
+			cur.pck = cur.lck / cur.pck_div;
+
+			if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) {
+				best = cur;
+
+				if (cur.pck == req_pck)
+					goto found;
+			}
+		}
+	} else {
+		BUG();
+	}
+
+found:
+	if (!match) {
+		if (min_fck_per_pck) {
+			DSSERR("Could not find suitable clock settings.\n"
+					"Turning FCK/PCK constraint off and"
+					"trying again.\n");
+			min_fck_per_pck = 0;
+			goto retry;
+		}
+
+		DSSERR("Could not find suitable clock settings.\n");
+
+		return -EINVAL;
+	}
+
+	if (cinfo)
+		*cinfo = best;
+
+	dispc.cache_req_pck = req_pck;
+	dispc.cache_prate = prate;
+	dispc.cache_cinfo = best;
+
+	return 0;
+}
+
+int dispc_set_clock_div(struct dispc_clock_info *cinfo)
+{
+	unsigned long prate;
+	int r;
+
+	if (cpu_is_omap34xx()) {
+		prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
+		DSSDBG("dpll4_m4 = %ld\n", prate);
+	}
+
+	DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div);
+	DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div);
+	DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div);
+
+	if (cpu_is_omap34xx()) {
+		r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div);
+		if (r)
+			return r;
+	}
+
+	dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div);
+
+	return 0;
+}
+
+int dispc_get_clock_div(struct dispc_clock_info *cinfo)
+{
+	cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1);
+
+	if (cpu_is_omap34xx()) {
+		unsigned long prate;
+		prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
+		cinfo->fck_div = prate / (cinfo->fck / 2);
+	} else {
+		cinfo->fck_div = 0;
+	}
+
+	cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16);
+	cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0);
+
+	cinfo->lck = cinfo->fck / cinfo->lck_div;
+	cinfo->pck = cinfo->lck / cinfo->pck_div;
+
+	return 0;
+}
+
+/* dispc.irq_lock has to be locked by the caller */
+static void _omap_dispc_set_irqs(void)
+{
+	u32 mask;
+	u32 old_mask;
+	int i;
+	struct omap_dispc_isr_data *isr_data;
+
+	mask = dispc.irq_error_mask;
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc.registered_isr[i];
+
+		if (isr_data->isr == NULL)
+			continue;
+
+		mask |= isr_data->mask;
+	}
+
+	enable_clocks(1);
+
+	old_mask = dispc_read_reg(DISPC_IRQENABLE);
+	/* clear the irqstatus for newly enabled irqs */
+	dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask);
+
+	dispc_write_reg(DISPC_IRQENABLE, mask);
+
+	enable_clocks(0);
+}
+
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
+{
+	int i;
+	int ret;
+	unsigned long flags;
+	struct omap_dispc_isr_data *isr_data;
+
+	if (isr == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dispc.irq_lock, flags);
+
+	/* check for duplicate entry */
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc.registered_isr[i];
+		if (isr_data->isr == isr && isr_data->arg == arg &&
+				isr_data->mask == mask) {
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	isr_data = NULL;
+	ret = -EBUSY;
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc.registered_isr[i];
+
+		if (isr_data->isr != NULL)
+			continue;
+
+		isr_data->isr = isr;
+		isr_data->arg = arg;
+		isr_data->mask = mask;
+		ret = 0;
+
+		break;
+	}
+
+	_omap_dispc_set_irqs();
+
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+
+	return 0;
+err:
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_dispc_register_isr);
+
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
+{
+	int i;
+	unsigned long flags;
+	int ret = -EINVAL;
+	struct omap_dispc_isr_data *isr_data;
+
+	spin_lock_irqsave(&dispc.irq_lock, flags);
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc.registered_isr[i];
+		if (isr_data->isr != isr || isr_data->arg != arg ||
+				isr_data->mask != mask)
+			continue;
+
+		/* found the correct isr */
+
+		isr_data->isr = NULL;
+		isr_data->arg = NULL;
+		isr_data->mask = 0;
+
+		ret = 0;
+		break;
+	}
+
+	if (ret == 0)
+		_omap_dispc_set_irqs();
+
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_dispc_unregister_isr);
+
+#ifdef DEBUG
+static void print_irq_status(u32 status)
+{
+	if ((status & dispc.irq_error_mask) == 0)
+		return;
+
+	printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status);
+
+#define PIS(x) \
+	if (status & DISPC_IRQ_##x) \
+		printk(#x " ");
+	PIS(GFX_FIFO_UNDERFLOW);
+	PIS(OCP_ERR);
+	PIS(VID1_FIFO_UNDERFLOW);
+	PIS(VID2_FIFO_UNDERFLOW);
+	PIS(SYNC_LOST);
+	PIS(SYNC_LOST_DIGIT);
+#undef PIS
+
+	printk("\n");
+}
+#endif
+
+/* Called from dss.c. Note that we don't touch clocks here,
+ * but we presume they are on because we got an IRQ. However,
+ * an irq handler may turn the clocks off, so we may not have
+ * clock later in the function. */
+void dispc_irq_handler(void)
+{
+	int i;
+	u32 irqstatus;
+	u32 handledirqs = 0;
+	u32 unhandled_errors;
+	struct omap_dispc_isr_data *isr_data;
+	struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
+
+	spin_lock(&dispc.irq_lock);
+
+	irqstatus = dispc_read_reg(DISPC_IRQSTATUS);
+
+#ifdef DEBUG
+	if (dss_debug)
+		print_irq_status(irqstatus);
+#endif
+	/* Ack the interrupt. Do it here before clocks are possibly turned
+	 * off */
+	dispc_write_reg(DISPC_IRQSTATUS, irqstatus);
+
+	/* make a copy and unlock, so that isrs can unregister
+	 * themselves */
+	memcpy(registered_isr, dispc.registered_isr,
+			sizeof(registered_isr));
+
+	spin_unlock(&dispc.irq_lock);
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &registered_isr[i];
+
+		if (!isr_data->isr)
+			continue;
+
+		if (isr_data->mask & irqstatus) {
+			isr_data->isr(isr_data->arg, irqstatus);
+			handledirqs |= isr_data->mask;
+		}
+	}
+
+	spin_lock(&dispc.irq_lock);
+
+	unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask;
+
+	if (unhandled_errors) {
+		dispc.error_irqs |= unhandled_errors;
+
+		dispc.irq_error_mask &= ~unhandled_errors;
+		_omap_dispc_set_irqs();
+
+		schedule_work(&dispc.error_work);
+	}
+
+	spin_unlock(&dispc.irq_lock);
+}
+
+static void dispc_error_worker(struct work_struct *work)
+{
+	int i;
+	u32 errors;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dispc.irq_lock, flags);
+	errors = dispc.error_irqs;
+	dispc.error_irqs = 0;
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+
+	if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) {
+		DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n");
+		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+			struct omap_overlay *ovl;
+			ovl = omap_dss_get_overlay(i);
+
+			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+				continue;
+
+			if (ovl->id == 0) {
+				dispc_enable_plane(ovl->id, 0);
+				dispc_go(ovl->manager->id);
+				mdelay(50);
+				break;
+			}
+		}
+	}
+
+	if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) {
+		DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n");
+		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+			struct omap_overlay *ovl;
+			ovl = omap_dss_get_overlay(i);
+
+			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+				continue;
+
+			if (ovl->id == 1) {
+				dispc_enable_plane(ovl->id, 0);
+				dispc_go(ovl->manager->id);
+				mdelay(50);
+				break;
+			}
+		}
+	}
+
+	if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) {
+		DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n");
+		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+			struct omap_overlay *ovl;
+			ovl = omap_dss_get_overlay(i);
+
+			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+				continue;
+
+			if (ovl->id == 2) {
+				dispc_enable_plane(ovl->id, 0);
+				dispc_go(ovl->manager->id);
+				mdelay(50);
+				break;
+			}
+		}
+	}
+
+	if (errors & DISPC_IRQ_SYNC_LOST) {
+		struct omap_overlay_manager *manager = NULL;
+		bool enable = false;
+
+		DSSERR("SYNC_LOST, disabling LCD\n");
+
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			struct omap_overlay_manager *mgr;
+			mgr = omap_dss_get_overlay_manager(i);
+
+			if (mgr->id == OMAP_DSS_CHANNEL_LCD) {
+				manager = mgr;
+				enable = mgr->device->state ==
+						OMAP_DSS_DISPLAY_ACTIVE;
+				mgr->device->disable(mgr->device);
+				break;
+			}
+		}
+
+		if (manager) {
+			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+				struct omap_overlay *ovl;
+				ovl = omap_dss_get_overlay(i);
+
+				if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+					continue;
+
+				if (ovl->id != 0 && ovl->manager == manager)
+					dispc_enable_plane(ovl->id, 0);
+			}
+
+			dispc_go(manager->id);
+			mdelay(50);
+			if (enable)
+				manager->device->enable(manager->device);
+		}
+	}
+
+	if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
+		struct omap_overlay_manager *manager = NULL;
+		bool enable = false;
+
+		DSSERR("SYNC_LOST_DIGIT, disabling TV\n");
+
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			struct omap_overlay_manager *mgr;
+			mgr = omap_dss_get_overlay_manager(i);
+
+			if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) {
+				manager = mgr;
+				enable = mgr->device->state ==
+						OMAP_DSS_DISPLAY_ACTIVE;
+				mgr->device->disable(mgr->device);
+				break;
+			}
+		}
+
+		if (manager) {
+			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+				struct omap_overlay *ovl;
+				ovl = omap_dss_get_overlay(i);
+
+				if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+					continue;
+
+				if (ovl->id != 0 && ovl->manager == manager)
+					dispc_enable_plane(ovl->id, 0);
+			}
+
+			dispc_go(manager->id);
+			mdelay(50);
+			if (enable)
+				manager->device->enable(manager->device);
+		}
+	}
+
+	if (errors & DISPC_IRQ_OCP_ERR) {
+		DSSERR("OCP_ERR\n");
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			struct omap_overlay_manager *mgr;
+			mgr = omap_dss_get_overlay_manager(i);
+
+			if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
+				mgr->device->disable(mgr->device);
+		}
+	}
+
+	spin_lock_irqsave(&dispc.irq_lock, flags);
+	dispc.irq_error_mask |= errors;
+	_omap_dispc_set_irqs();
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+}
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout)
+{
+	void dispc_irq_wait_handler(void *data, u32 mask)
+	{
+		complete((struct completion *)data);
+	}
+
+	int r;
+	DECLARE_COMPLETION_ONSTACK(completion);
+
+	r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
+			irqmask);
+
+	if (r)
+		return r;
+
+	timeout = wait_for_completion_timeout(&completion, timeout);
+
+	omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	if (timeout == -ERESTARTSYS)
+		return -ERESTARTSYS;
+
+	return 0;
+}
+
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout)
+{
+	void dispc_irq_wait_handler(void *data, u32 mask)
+	{
+		complete((struct completion *)data);
+	}
+
+	int r;
+	DECLARE_COMPLETION_ONSTACK(completion);
+
+	r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
+			irqmask);
+
+	if (r)
+		return r;
+
+	timeout = wait_for_completion_interruptible_timeout(&completion,
+			timeout);
+
+	omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	if (timeout == -ERESTARTSYS)
+		return -ERESTARTSYS;
+
+	return 0;
+}
+
+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
+void dispc_fake_vsync_irq(void)
+{
+	u32 irqstatus = DISPC_IRQ_VSYNC;
+	int i;
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		struct omap_dispc_isr_data *isr_data;
+		isr_data = &dispc.registered_isr[i];
+
+		if (!isr_data->isr)
+			continue;
+
+		if (isr_data->mask & irqstatus)
+			isr_data->isr(isr_data->arg, irqstatus);
+	}
+}
+#endif
+
+static void _omap_dispc_initialize_irq(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dispc.irq_lock, flags);
+
+	memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr));
+
+	dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
+
+	/* there's SYNC_LOST_DIGIT waiting after enabling the DSS,
+	 * so clear it */
+	dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS));
+
+	_omap_dispc_set_irqs();
+
+	spin_unlock_irqrestore(&dispc.irq_lock, flags);
+}
+
+void dispc_enable_sidle(void)
+{
+	REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3);	/* SIDLEMODE: smart idle */
+}
+
+void dispc_disable_sidle(void)
+{
+	REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3);	/* SIDLEMODE: no idle */
+}
+
+static void _omap_dispc_initial_config(void)
+{
+	u32 l;
+
+	l = dispc_read_reg(DISPC_SYSCONFIG);
+	l = FLD_MOD(l, 2, 13, 12);	/* MIDLEMODE: smart standby */
+	l = FLD_MOD(l, 2, 4, 3);	/* SIDLEMODE: smart idle */
+	l = FLD_MOD(l, 1, 2, 2);	/* ENWAKEUP */
+	l = FLD_MOD(l, 1, 0, 0);	/* AUTOIDLE */
+	dispc_write_reg(DISPC_SYSCONFIG, l);
+
+	/* FUNCGATED */
+	REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
+
+	/* L3 firewall setting: enable access to OCM RAM */
+	if (cpu_is_omap24xx())
+		__raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
+
+	_dispc_setup_color_conv_coef();
+
+	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
+
+	dispc_read_plane_fifo_sizes();
+}
+
+int dispc_init(void)
+{
+	u32 rev;
+
+	spin_lock_init(&dispc.irq_lock);
+
+	INIT_WORK(&dispc.error_work, dispc_error_worker);
+
+	dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
+	if (!dispc.base) {
+		DSSERR("can't ioremap DISPC\n");
+		return -ENOMEM;
+	}
+
+	if (cpu_is_omap34xx()) {
+		dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck");
+		if (IS_ERR(dispc.dpll4_m4_ck)) {
+			DSSERR("Failed to get dpll4_m4_ck\n");
+			return -ENODEV;
+		}
+	}
+
+	enable_clocks(1);
+
+	_omap_dispc_initial_config();
+
+	_omap_dispc_initialize_irq();
+
+	dispc_save_context();
+
+	rev = dispc_read_reg(DISPC_REVISION);
+	printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
+	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	enable_clocks(0);
+
+	return 0;
+}
+
+void dispc_exit(void)
+{
+	if (cpu_is_omap34xx())
+		clk_put(dispc.dpll4_m4_ck);
+	iounmap(dispc.base);
+}
+
+int dispc_enable_plane(enum omap_plane plane, bool enable)
+{
+	DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
+
+	enable_clocks(1);
+	_dispc_enable_plane(plane, enable);
+	enable_clocks(0);
+
+	return 0;
+}
+
+int dispc_setup_plane(enum omap_plane plane,
+		       u32 paddr, u16 screen_width,
+		       u16 pos_x, u16 pos_y,
+		       u16 width, u16 height,
+		       u16 out_width, u16 out_height,
+		       enum omap_color_mode color_mode,
+		       bool ilace,
+		       enum omap_dss_rotation_type rotation_type,
+		       u8 rotation, bool mirror, u8 global_alpha)
+{
+	int r = 0;
+
+	DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> "
+	       "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n",
+	       plane, paddr, screen_width, pos_x, pos_y,
+	       width, height,
+	       out_width, out_height,
+	       ilace, color_mode,
+	       rotation, mirror);
+
+	enable_clocks(1);
+
+	r = _dispc_setup_plane(plane,
+			   paddr, screen_width,
+			   pos_x, pos_y,
+			   width, height,
+			   out_width, out_height,
+			   color_mode, ilace,
+			   rotation_type,
+			   rotation, mirror,
+			   global_alpha);
+
+	enable_clocks(0);
+
+	return r;
+}
--- /dev/null
+++ b/drivers/video/omap2/dss/display.c
@@ -0,0 +1,658 @@
+/*
+ * linux/drivers/video/omap2/dss/display.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "DISPLAY"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <mach/display.h>
+#include "dss.h"
+
+static LIST_HEAD(display_list);
+
+static ssize_t display_enabled_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", enabled);
+}
+
+static ssize_t display_enabled_store(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	bool enabled, r;
+
+	enabled = simple_strtoul(buf, NULL, 10);
+
+	if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
+		if (enabled) {
+			r = dssdev->enable(dssdev);
+			if (r)
+				return r;
+		} else {
+			dssdev->disable(dssdev);
+		}
+	}
+
+	return size;
+}
+
+static ssize_t display_upd_mode_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO;
+	if (dssdev->get_update_mode)
+		mode = dssdev->get_update_mode(dssdev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t display_upd_mode_store(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	int val, r;
+	enum omap_dss_update_mode mode;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	switch (val) {
+	case OMAP_DSS_UPDATE_DISABLED:
+	case OMAP_DSS_UPDATE_AUTO:
+	case OMAP_DSS_UPDATE_MANUAL:
+		mode = (enum omap_dss_update_mode)val;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	r = dssdev->set_update_mode(dssdev, mode);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t display_tear_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			dssdev->get_te ? dssdev->get_te(dssdev) : 0);
+}
+
+static ssize_t display_tear_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	unsigned long te;
+	int r;
+
+	if (!dssdev->enable_te || !dssdev->get_te)
+		return -ENOENT;
+
+	te = simple_strtoul(buf, NULL, 0);
+
+	r = dssdev->enable_te(dssdev, te);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t display_timings_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct omap_video_timings t;
+
+	if (!dssdev->get_timings)
+		return -ENOENT;
+
+	dssdev->get_timings(dssdev, &t);
+
+	return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
+			t.pixel_clock,
+			t.x_res, t.hfp, t.hbp, t.hsw,
+			t.y_res, t.vfp, t.vbp, t.vsw);
+}
+
+static ssize_t display_timings_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct omap_video_timings t;
+	int r, found;
+
+	if (!dssdev->set_timings || !dssdev->check_timings)
+		return -ENOENT;
+
+	found = 0;
+#ifdef CONFIG_OMAP2_DSS_VENC
+	if (strncmp("pal", buf, 3) == 0) {
+		t = omap_dss_pal_timings;
+		found = 1;
+	} else if (strncmp("ntsc", buf, 4) == 0) {
+		t = omap_dss_ntsc_timings;
+		found = 1;
+	}
+#endif
+	if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
+				&t.pixel_clock,
+				&t.x_res, &t.hfp, &t.hbp, &t.hsw,
+				&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
+		return -EINVAL;
+
+	r = dssdev->check_timings(dssdev, &t);
+	if (r)
+		return r;
+
+	dssdev->set_timings(dssdev, &t);
+
+	return size;
+}
+
+static ssize_t display_rotate_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	int rotate;
+	if (!dssdev->get_rotate)
+		return -ENOENT;
+	rotate = dssdev->get_rotate(dssdev);
+	return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
+}
+
+static ssize_t display_rotate_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	unsigned long rot;
+	int r;
+
+	if (!dssdev->set_rotate || !dssdev->get_rotate)
+		return -ENOENT;
+
+	rot = simple_strtoul(buf, NULL, 0);
+
+	r = dssdev->set_rotate(dssdev, rot);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t display_mirror_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	int mirror;
+	if (!dssdev->get_mirror)
+		return -ENOENT;
+	mirror = dssdev->get_mirror(dssdev);
+	return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
+}
+
+static ssize_t display_mirror_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	unsigned long mirror;
+	int r;
+
+	if (!dssdev->set_mirror || !dssdev->get_mirror)
+		return -ENOENT;
+
+	mirror = simple_strtoul(buf, NULL, 0);
+
+	r = dssdev->set_mirror(dssdev, mirror);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t display_wss_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	unsigned int wss;
+
+	if (!dssdev->get_wss)
+		return -ENOENT;
+
+	wss = dssdev->get_wss(dssdev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
+}
+
+static ssize_t display_wss_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	unsigned long wss;
+	int r;
+
+	if (!dssdev->get_wss || !dssdev->set_wss)
+		return -ENOENT;
+
+	if (strict_strtoul(buf, 0, &wss))
+		return -EINVAL;
+
+	if (wss > 0xfffff)
+		return -EINVAL;
+
+	r = dssdev->set_wss(dssdev, wss);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR,
+		display_enabled_show, display_enabled_store);
+static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR,
+		display_upd_mode_show, display_upd_mode_store);
+static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR,
+		display_tear_show, display_tear_store);
+static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR,
+		display_timings_show, display_timings_store);
+static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR,
+		display_rotate_show, display_rotate_store);
+static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR,
+		display_mirror_show, display_mirror_store);
+static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR,
+		display_wss_show, display_wss_store);
+
+static struct device_attribute *display_sysfs_attrs[] = {
+	&dev_attr_enabled,
+	&dev_attr_update_mode,
+	&dev_attr_tear_elim,
+	&dev_attr_timings,
+	&dev_attr_rotate,
+	&dev_attr_mirror,
+	&dev_attr_wss,
+	NULL
+};
+
+static void default_get_resolution(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres)
+{
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
+}
+
+void default_get_overlay_fifo_thresholds(enum omap_plane plane,
+		u32 fifo_size, enum omap_burst_size *burst_size,
+		u32 *fifo_low, u32 *fifo_high)
+{
+	unsigned burst_size_bytes;
+
+	*burst_size = OMAP_DSS_BURST_16x32;
+	burst_size_bytes = 16 * 32 / 8;
+
+	*fifo_high = fifo_size - 1;
+	*fifo_low = fifo_size - burst_size_bytes;
+}
+
+static int default_wait_vsync(struct omap_dss_device *dssdev)
+{
+	unsigned long timeout = msecs_to_jiffies(500);
+	u32 irq;
+
+	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
+		irq = DISPC_IRQ_EVSYNC_ODD;
+	else
+		irq = DISPC_IRQ_VSYNC;
+
+	return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+}
+
+static int default_get_recommended_bpp(struct omap_dss_device *dssdev)
+{
+	if (dssdev->panel.recommended_bpp)
+		return dssdev->panel.recommended_bpp;
+
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_DPI:
+		if (dssdev->phy.dpi.data_lines == 24)
+			return 24;
+		else
+			return 16;
+
+	case OMAP_DISPLAY_TYPE_DBI:
+	case OMAP_DISPLAY_TYPE_DSI:
+		if (dssdev->ctrl.pixel_size == 24)
+			return 24;
+		else
+			return 16;
+	case OMAP_DISPLAY_TYPE_VENC:
+	case OMAP_DISPLAY_TYPE_SDI:
+		return 24;
+		return 24;
+	default:
+		BUG();
+	}
+}
+
+/* Checks if replication logic should be used. Only use for active matrix,
+ * when overlay is in RGB12U or RGB16 mode, and LCD interface is
+ * 18bpp or 24bpp */
+bool dss_use_replication(struct omap_dss_device *dssdev,
+		enum omap_color_mode mode)
+{
+	int bpp;
+
+	if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
+		return false;
+
+	if (dssdev->type == OMAP_DISPLAY_TYPE_DPI &&
+			(dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0)
+		return false;
+
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_DPI:
+		bpp = dssdev->phy.dpi.data_lines;
+		break;
+	case OMAP_DISPLAY_TYPE_VENC:
+	case OMAP_DISPLAY_TYPE_SDI:
+		bpp = 24;
+		break;
+	case OMAP_DISPLAY_TYPE_DBI:
+	case OMAP_DISPLAY_TYPE_DSI:
+		bpp = dssdev->ctrl.pixel_size;
+		break;
+	default:
+		BUG();
+	}
+
+	return bpp > 16;
+}
+
+void dss_init_device(struct platform_device *pdev,
+		struct omap_dss_device *dssdev)
+{
+	struct device_attribute *attr;
+	int i;
+	int r;
+
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_DPI:
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	case OMAP_DISPLAY_TYPE_DBI:
+#endif
+#ifdef CONFIG_OMAP2_DSS_SDI
+	case OMAP_DISPLAY_TYPE_SDI:
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+	case OMAP_DISPLAY_TYPE_DSI:
+#endif
+#ifdef CONFIG_OMAP2_DSS_VENC
+	case OMAP_DISPLAY_TYPE_VENC:
+#endif
+		break;
+	default:
+		DSSERR("Support for display '%s' not compiled in.\n",
+				dssdev->name);
+		return;
+	}
+
+	dssdev->get_resolution = default_get_resolution;
+	dssdev->get_recommended_bpp = default_get_recommended_bpp;
+	dssdev->wait_vsync = default_wait_vsync;
+
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_DPI:
+		r = dpi_init_display(dssdev);
+		break;
+#ifdef CONFIG_OMAP2_DSS_RFBI
+	case OMAP_DISPLAY_TYPE_DBI:
+		r = rfbi_init_display(dssdev);
+		break;
+#endif
+#ifdef CONFIG_OMAP2_DSS_VENC
+	case OMAP_DISPLAY_TYPE_VENC:
+		r = venc_init_display(dssdev);
+		break;
+#endif
+#ifdef CONFIG_OMAP2_DSS_SDI
+	case OMAP_DISPLAY_TYPE_SDI:
+		r = sdi_init_display(dssdev);
+		break;
+#endif
+#ifdef CONFIG_OMAP2_DSS_DSI
+	case OMAP_DISPLAY_TYPE_DSI:
+		r = dsi_init_display(dssdev);
+		break;
+#endif
+	default:
+		BUG();
+	}
+
+	if (r) {
+		DSSERR("failed to init display %s\n", dssdev->name);
+		return;
+	}
+
+	/* create device sysfs files */
+	i = 0;
+	while ((attr = display_sysfs_attrs[i++]) != NULL) {
+		r = device_create_file(&dssdev->dev, attr);
+		if (r)
+			DSSERR("failed to create sysfs file\n");
+	}
+
+	/* create display? sysfs links */
+	r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj,
+			dev_name(&dssdev->dev));
+	if (r)
+		DSSERR("failed to create sysfs display link\n");
+}
+
+void dss_uninit_device(struct platform_device *pdev,
+		struct omap_dss_device *dssdev)
+{
+	struct device_attribute *attr;
+	int i = 0;
+
+	sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev));
+
+	while ((attr = display_sysfs_attrs[i++]) != NULL)
+		device_remove_file(&dssdev->dev, attr);
+
+	if (dssdev->manager)
+		dssdev->manager->unset_device(dssdev->manager);
+}
+
+static int dss_suspend_device(struct device *dev, void *data)
+{
+	int r;
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+		dssdev->activate_after_resume = false;
+		return 0;
+	}
+
+	if (!dssdev->suspend) {
+		DSSERR("display '%s' doesn't implement suspend\n",
+				dssdev->name);
+		return -ENOSYS;
+	}
+
+	r = dssdev->suspend(dssdev);
+	if (r)
+		return r;
+
+	dssdev->activate_after_resume = true;
+
+	return 0;
+}
+
+int dss_suspend_all_devices(void)
+{
+	int r;
+	struct bus_type *bus = dss_get_bus();
+
+	r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device);
+	if (r) {
+		/* resume all displays that were suspended */
+		dss_resume_all_devices();
+		return r;
+	}
+
+	return 0;
+}
+
+static int dss_resume_device(struct device *dev, void *data)
+{
+	int r;
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+
+	if (dssdev->activate_after_resume && dssdev->resume) {
+		r = dssdev->resume(dssdev);
+		if (r)
+			return r;
+	}
+
+	dssdev->activate_after_resume = false;
+
+	return 0;
+}
+
+int dss_resume_all_devices(void)
+{
+	struct bus_type *bus = dss_get_bus();
+
+	return bus_for_each_dev(bus, NULL, NULL, dss_resume_device);
+}
+
+
+void omap_dss_get_device(struct omap_dss_device *dssdev)
+{
+	get_device(&dssdev->dev);
+}
+EXPORT_SYMBOL(omap_dss_get_device);
+
+void omap_dss_put_device(struct omap_dss_device *dssdev)
+{
+	put_device(&dssdev->dev);
+}
+EXPORT_SYMBOL(omap_dss_put_device);
+
+/* ref count of the found device is incremented. ref count
+ * of from-device is decremented. */
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from)
+{
+	struct device *dev;
+	struct device *dev_start = NULL;
+	struct omap_dss_device *dssdev = NULL;
+
+	int match(struct device *dev, void *data)
+	{
+		/* skip panels connected to controllers */
+		if (to_dss_device(dev)->panel.ctrl)
+			return 0;
+
+		return 1;
+	}
+
+	if (from)
+		dev_start = &from->dev;
+	dev = bus_find_device(dss_get_bus(), dev_start, NULL, match);
+	if (dev)
+		dssdev = to_dss_device(dev);
+	if (from)
+		put_device(&from->dev);
+
+	return dssdev;
+}
+EXPORT_SYMBOL(omap_dss_get_next_device);
+
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data))
+{
+	struct omap_dss_device *dssdev = NULL;
+
+	while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) {
+		if (match(dssdev, data))
+			return dssdev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(omap_dss_find_device);
+
+int omap_dss_start_device(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	if (!dssdev->driver) {
+		DSSDBG("no driver\n");
+		r = -ENODEV;
+		goto err0;
+	}
+
+	if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) {
+		DSSDBG("no panel driver\n");
+		r = -ENODEV;
+		goto err0;
+	}
+
+	if (!try_module_get(dssdev->dev.driver->owner)) {
+		r = -ENODEV;
+		goto err0;
+	}
+
+	if (dssdev->ctrl.panel) {
+		if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) {
+			r = -ENODEV;
+			goto err1;
+		}
+	}
+
+	return 0;
+err1:
+	module_put(dssdev->dev.driver->owner);
+err0:
+	return r;
+}
+EXPORT_SYMBOL(omap_dss_start_device);
+
+void omap_dss_stop_device(struct omap_dss_device *dssdev)
+{
+	if (dssdev->ctrl.panel)
+		module_put(dssdev->ctrl.panel->dev.driver->owner);
+
+	module_put(dssdev->dev.driver->owner);
+}
+EXPORT_SYMBOL(omap_dss_stop_device);
+
--- /dev/null
+++ b/drivers/video/omap2/dss/dpi.c
@@ -0,0 +1,388 @@
+/*
+ * linux/drivers/video/omap2/dss/dpi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "DPI"
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+
+#include <mach/board.h>
+#include <mach/display.h>
+#include <mach/cpu.h>
+
+#include "dss.h"
+
+static struct {
+	int update_enabled;
+} dpi;
+
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
+		unsigned long *fck, int *lck_div, int *pck_div)
+{
+	struct dsi_clock_info cinfo;
+	int r;
+
+	r = dsi_pll_calc_pck(is_tft, pck_req, &cinfo);
+	if (r)
+		return r;
+
+	r = dsi_pll_program(&cinfo);
+	if (r)
+		return r;
+
+	dss_select_clk_source(0, 1);
+
+	dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div);
+
+	*fck = cinfo.dsi1_pll_fclk;
+	*lck_div = cinfo.lck_div;
+	*pck_div = cinfo.pck_div;
+
+	return 0;
+}
+#else
+static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req,
+		unsigned long *fck, int *lck_div, int *pck_div)
+{
+	struct dispc_clock_info cinfo;
+	int r;
+
+	r = dispc_calc_clock_div(is_tft, pck_req, &cinfo);
+	if (r)
+		return r;
+
+	r = dispc_set_clock_div(&cinfo);
+	if (r)
+		return r;
+
+	*fck = cinfo.fck;
+	*lck_div = cinfo.lck_div;
+	*pck_div = cinfo.pck_div;
+
+	return 0;
+}
+#endif
+
+static int dpi_set_mode(struct omap_dss_device *dssdev)
+{
+	struct omap_video_timings *t = &dssdev->panel.timings;
+	int lck_div, pck_div;
+	unsigned long fck;
+	unsigned long pck;
+	bool is_tft;
+	int r = 0;
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi,
+			dssdev->panel.acb);
+
+	is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
+
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+	r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000,
+			&fck, &lck_div, &pck_div);
+#else
+	r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000,
+			&fck, &lck_div, &pck_div);
+#endif
+	if (r)
+		goto err0;
+
+	pck = fck / lck_div / pck_div / 1000;
+
+	if (pck != t->pixel_clock) {
+		DSSWARN("Could not find exact pixel clock. "
+				"Requested %d kHz, got %lu kHz\n",
+				t->pixel_clock, pck);
+
+		t->pixel_clock = pck;
+	}
+
+	dispc_set_lcd_timings(t);
+
+err0:
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	return r;
+}
+
+static int dpi_basic_init(struct omap_dss_device *dssdev)
+{
+	bool is_tft;
+
+	is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
+
+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
+	dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT :
+			OMAP_DSS_LCD_DISPLAY_STN);
+	dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines);
+
+	return 0;
+}
+
+static int dpi_display_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omap_dss_start_device(dssdev);
+	if (r) {
+		DSSERR("failed to start device\n");
+		goto err0;
+	}
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		DSSERR("display already enabled\n");
+		r = -EINVAL;
+		goto err1;
+	}
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	r = dpi_basic_init(dssdev);
+	if (r)
+		goto err2;
+
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+	dss_clk_enable(DSS_CLK_FCK2);
+	r = dsi_pll_init(0, 1);
+	if (r)
+		goto err3;
+#endif
+	r = dpi_set_mode(dssdev);
+	if (r)
+		goto err4;
+
+	mdelay(2);
+
+	dispc_enable_lcd_out(1);
+
+	r = dssdev->driver->enable(dssdev);
+	if (r)
+		goto err5;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+
+err5:
+	dispc_enable_lcd_out(0);
+err4:
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+	dsi_pll_uninit();
+err3:
+	dss_clk_disable(DSS_CLK_FCK2);
+#endif
+err2:
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+err1:
+	omap_dss_stop_device(dssdev);
+err0:
+	return r;
+}
+
+static int dpi_display_resume(struct omap_dss_device *dssdev);
+
+static void dpi_display_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
+		return;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+		dpi_display_resume(dssdev);
+
+	dssdev->driver->disable(dssdev);
+
+	dispc_enable_lcd_out(0);
+
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+	dss_select_clk_source(0, 0);
+	dsi_pll_uninit();
+	dss_clk_disable(DSS_CLK_FCK2);
+#endif
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	omap_dss_stop_device(dssdev);
+}
+
+static int dpi_display_suspend(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return -EINVAL;
+
+	DSSDBG("dpi_display_suspend\n");
+
+	if (dssdev->driver->suspend)
+		dssdev->driver->suspend(dssdev);
+
+	dispc_enable_lcd_out(0);
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+	return 0;
+}
+
+static int dpi_display_resume(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
+		return -EINVAL;
+
+	DSSDBG("dpi_display_resume\n");
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dispc_enable_lcd_out(1);
+
+	if (dssdev->driver->resume)
+		dssdev->driver->resume(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void dpi_set_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	DSSDBG("dpi_set_timings\n");
+	dssdev->panel.timings = *timings;
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		dpi_set_mode(dssdev);
+		dispc_go(OMAP_DSS_CHANNEL_LCD);
+	}
+}
+
+static int dpi_check_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	bool is_tft;
+	int r;
+	int lck_div, pck_div;
+	unsigned long fck;
+	unsigned long pck;
+
+	if (!dispc_lcd_timings_ok(timings))
+		return -EINVAL;
+
+	if (timings->pixel_clock == 0)
+		return -EINVAL;
+
+	is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
+
+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
+	{
+		struct dsi_clock_info cinfo;
+		r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000,
+				&cinfo);
+
+		if (r)
+			return r;
+
+		fck = cinfo.dsi1_pll_fclk;
+		lck_div = cinfo.lck_div;
+		pck_div = cinfo.pck_div;
+	}
+#else
+	{
+		struct dispc_clock_info cinfo;
+		r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000,
+				&cinfo);
+
+		if (r)
+			return r;
+
+		fck = cinfo.fck;
+		lck_div = cinfo.lck_div;
+		pck_div = cinfo.pck_div;
+	}
+#endif
+
+	pck = fck / lck_div / pck_div / 1000;
+
+	timings->pixel_clock = pck;
+
+	return 0;
+}
+
+static void dpi_get_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static int dpi_display_set_update_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_update_mode mode)
+{
+	if (mode == OMAP_DSS_UPDATE_MANUAL)
+		return -EINVAL;
+
+	if (mode == OMAP_DSS_UPDATE_DISABLED) {
+		dispc_enable_lcd_out(0);
+		dpi.update_enabled = 0;
+	} else {
+		dispc_enable_lcd_out(1);
+		dpi.update_enabled = 1;
+	}
+
+	return 0;
+}
+
+static enum omap_dss_update_mode dpi_display_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
+		OMAP_DSS_UPDATE_DISABLED;
+}
+
+int dpi_init_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("init_display\n");
+
+	dssdev->enable = dpi_display_enable;
+	dssdev->disable = dpi_display_disable;
+	dssdev->suspend = dpi_display_suspend;
+	dssdev->resume = dpi_display_resume;
+	dssdev->set_timings = dpi_set_timings;
+	dssdev->check_timings = dpi_check_timings;
+	dssdev->get_timings = dpi_get_timings;
+	dssdev->set_update_mode = dpi_display_set_update_mode;
+	dssdev->get_update_mode = dpi_display_get_update_mode;
+
+	return 0;
+}
+
+int dpi_init(void)
+{
+	return 0;
+}
+
+void dpi_exit(void)
+{
+}
+
--- /dev/null
+++ b/drivers/video/omap2/dss/dsi.c
@@ -0,0 +1,3509 @@
+/*
+ * linux/drivers/video/omap2/dss/dsi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "DSI"
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/seq_file.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+
+#include <mach/board.h>
+#include <mach/display.h>
+#include <mach/clock.h>
+
+#include "dss.h"
+
+/*#define VERBOSE_IRQ*/
+
+#define DSI_BASE		0x4804FC00
+
+struct dsi_reg { u16 idx; };
+
+#define DSI_REG(idx)		((const struct dsi_reg) { idx })
+
+#define DSI_SZ_REGS		SZ_1K
+/* DSI Protocol Engine */
+
+#define DSI_REVISION			DSI_REG(0x0000)
+#define DSI_SYSCONFIG			DSI_REG(0x0010)
+#define DSI_SYSSTATUS			DSI_REG(0x0014)
+#define DSI_IRQSTATUS			DSI_REG(0x0018)
+#define DSI_IRQENABLE			DSI_REG(0x001C)
+#define DSI_CTRL			DSI_REG(0x0040)
+#define DSI_COMPLEXIO_CFG1		DSI_REG(0x0048)
+#define DSI_COMPLEXIO_IRQ_STATUS	DSI_REG(0x004C)
+#define DSI_COMPLEXIO_IRQ_ENABLE	DSI_REG(0x0050)
+#define DSI_CLK_CTRL			DSI_REG(0x0054)
+#define DSI_TIMING1			DSI_REG(0x0058)
+#define DSI_TIMING2			DSI_REG(0x005C)
+#define DSI_VM_TIMING1			DSI_REG(0x0060)
+#define DSI_VM_TIMING2			DSI_REG(0x0064)
+#define DSI_VM_TIMING3			DSI_REG(0x0068)
+#define DSI_CLK_TIMING			DSI_REG(0x006C)
+#define DSI_TX_FIFO_VC_SIZE		DSI_REG(0x0070)
+#define DSI_RX_FIFO_VC_SIZE		DSI_REG(0x0074)
+#define DSI_COMPLEXIO_CFG2		DSI_REG(0x0078)
+#define DSI_RX_FIFO_VC_FULLNESS		DSI_REG(0x007C)
+#define DSI_VM_TIMING4			DSI_REG(0x0080)
+#define DSI_TX_FIFO_VC_EMPTINESS	DSI_REG(0x0084)
+#define DSI_VM_TIMING5			DSI_REG(0x0088)
+#define DSI_VM_TIMING6			DSI_REG(0x008C)
+#define DSI_VM_TIMING7			DSI_REG(0x0090)
+#define DSI_STOPCLK_TIMING		DSI_REG(0x0094)
+#define DSI_VC_CTRL(n)			DSI_REG(0x0100 + (n * 0x20))
+#define DSI_VC_TE(n)			DSI_REG(0x0104 + (n * 0x20))
+#define DSI_VC_LONG_PACKET_HEADER(n)	DSI_REG(0x0108 + (n * 0x20))
+#define DSI_VC_LONG_PACKET_PAYLOAD(n)	DSI_REG(0x010C + (n * 0x20))
+#define DSI_VC_SHORT_PACKET_HEADER(n)	DSI_REG(0x0110 + (n * 0x20))
+#define DSI_VC_IRQSTATUS(n)		DSI_REG(0x0118 + (n * 0x20))
+#define DSI_VC_IRQENABLE(n)		DSI_REG(0x011C + (n * 0x20))
+
+/* DSIPHY_SCP */
+
+#define DSI_DSIPHY_CFG0			DSI_REG(0x200 + 0x0000)
+#define DSI_DSIPHY_CFG1			DSI_REG(0x200 + 0x0004)
+#define DSI_DSIPHY_CFG2			DSI_REG(0x200 + 0x0008)
+#define DSI_DSIPHY_CFG5			DSI_REG(0x200 + 0x0014)
+
+/* DSI_PLL_CTRL_SCP */
+
+#define DSI_PLL_CONTROL			DSI_REG(0x300 + 0x0000)
+#define DSI_PLL_STATUS			DSI_REG(0x300 + 0x0004)
+#define DSI_PLL_GO			DSI_REG(0x300 + 0x0008)
+#define DSI_PLL_CONFIGURATION1		DSI_REG(0x300 + 0x000C)
+#define DSI_PLL_CONFIGURATION2		DSI_REG(0x300 + 0x0010)
+
+#define REG_GET(idx, start, end) \
+	FLD_GET(dsi_read_reg(idx), start, end)
+
+#define REG_FLD_MOD(idx, val, start, end) \
+	dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end))
+
+/* Global interrupts */
+#define DSI_IRQ_VC0		(1 << 0)
+#define DSI_IRQ_VC1		(1 << 1)
+#define DSI_IRQ_VC2		(1 << 2)
+#define DSI_IRQ_VC3		(1 << 3)
+#define DSI_IRQ_WAKEUP		(1 << 4)
+#define DSI_IRQ_RESYNC		(1 << 5)
+#define DSI_IRQ_PLL_LOCK	(1 << 7)
+#define DSI_IRQ_PLL_UNLOCK	(1 << 8)
+#define DSI_IRQ_PLL_RECALL	(1 << 9)
+#define DSI_IRQ_COMPLEXIO_ERR	(1 << 10)
+#define DSI_IRQ_HS_TX_TIMEOUT	(1 << 14)
+#define DSI_IRQ_LP_RX_TIMEOUT	(1 << 15)
+#define DSI_IRQ_TE_TRIGGER	(1 << 16)
+#define DSI_IRQ_ACK_TRIGGER	(1 << 17)
+#define DSI_IRQ_SYNC_LOST	(1 << 18)
+#define DSI_IRQ_LDO_POWER_GOOD	(1 << 19)
+#define DSI_IRQ_TA_TIMEOUT	(1 << 20)
+#define DSI_IRQ_ERROR_MASK \
+	(DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \
+	DSI_IRQ_TA_TIMEOUT)
+#define DSI_IRQ_CHANNEL_MASK	0xf
+
+/* Virtual channel interrupts */
+#define DSI_VC_IRQ_CS		(1 << 0)
+#define DSI_VC_IRQ_ECC_CORR	(1 << 1)
+#define DSI_VC_IRQ_PACKET_SENT	(1 << 2)
+#define DSI_VC_IRQ_FIFO_TX_OVF	(1 << 3)
+#define DSI_VC_IRQ_FIFO_RX_OVF	(1 << 4)
+#define DSI_VC_IRQ_BTA		(1 << 5)
+#define DSI_VC_IRQ_ECC_NO_CORR	(1 << 6)
+#define DSI_VC_IRQ_FIFO_TX_UDF	(1 << 7)
+#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8)
+#define DSI_VC_IRQ_ERROR_MASK \
+	(DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \
+	DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \
+	DSI_VC_IRQ_FIFO_TX_UDF)
+
+/* ComplexIO interrupts */
+#define DSI_CIO_IRQ_ERRSYNCESC1		(1 << 0)
+#define DSI_CIO_IRQ_ERRSYNCESC2		(1 << 1)
+#define DSI_CIO_IRQ_ERRSYNCESC3		(1 << 2)
+#define DSI_CIO_IRQ_ERRESC1		(1 << 5)
+#define DSI_CIO_IRQ_ERRESC2		(1 << 6)
+#define DSI_CIO_IRQ_ERRESC3		(1 << 7)
+#define DSI_CIO_IRQ_ERRCONTROL1		(1 << 10)
+#define DSI_CIO_IRQ_ERRCONTROL2		(1 << 11)
+#define DSI_CIO_IRQ_ERRCONTROL3		(1 << 12)
+#define DSI_CIO_IRQ_STATEULPS1		(1 << 15)
+#define DSI_CIO_IRQ_STATEULPS2		(1 << 16)
+#define DSI_CIO_IRQ_STATEULPS3		(1 << 17)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1	(1 << 20)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1	(1 << 21)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2	(1 << 22)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2	(1 << 23)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3	(1 << 24)
+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3	(1 << 25)
+#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0	(1 << 30)
+#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1	(1 << 31)
+
+#define DSI_DT_DCS_SHORT_WRITE_0	0x05
+#define DSI_DT_DCS_SHORT_WRITE_1	0x15
+#define DSI_DT_DCS_READ			0x06
+#define DSI_DT_SET_MAX_RET_PKG_SIZE	0x37
+#define DSI_DT_NULL_PACKET		0x09
+#define DSI_DT_DCS_LONG_WRITE		0x39
+
+#define DSI_DT_RX_ACK_WITH_ERR		0x02
+#define DSI_DT_RX_DCS_LONG_READ		0x1c
+#define DSI_DT_RX_SHORT_READ_1		0x21
+#define DSI_DT_RX_SHORT_READ_2		0x22
+
+#define FINT_MAX 2100000
+#define FINT_MIN 750000
+#define REGN_MAX (1 << 7)
+#define REGM_MAX ((1 << 11) - 1)
+#define REGM3_MAX (1 << 4)
+#define REGM4_MAX (1 << 4)
+
+enum fifo_size {
+	DSI_FIFO_SIZE_0		= 0,
+	DSI_FIFO_SIZE_32	= 1,
+	DSI_FIFO_SIZE_64	= 2,
+	DSI_FIFO_SIZE_96	= 3,
+	DSI_FIFO_SIZE_128	= 4,
+};
+
+enum dsi_vc_mode {
+	DSI_VC_MODE_L4 = 0,
+	DSI_VC_MODE_VP,
+};
+
+struct dsi_update_region {
+	bool dirty;
+	u16 x, y, w, h;
+	struct omap_dss_device *device;
+};
+
+static struct
+{
+	void __iomem	*base;
+
+	unsigned long	dsi1_pll_fclk;	/* Hz */
+	unsigned long	dsi2_pll_fclk;	/* Hz */
+	unsigned long	dsiphy;		/* Hz */
+	unsigned long	ddr_clk;	/* Hz */
+
+	struct regulator *vdds_dsi_reg;
+
+	struct {
+		enum dsi_vc_mode mode;
+		struct omap_dss_device *dssdev;
+		enum fifo_size fifo_size;
+		int dest_per;	/* destination peripheral 0-3 */
+	} vc[4];
+
+	struct mutex lock;
+	struct mutex bus_lock;
+
+	unsigned pll_locked;
+
+	struct completion bta_completion;
+
+	struct task_struct *thread;
+	wait_queue_head_t waitqueue;
+
+	spinlock_t update_lock;
+	bool framedone_received;
+	struct dsi_update_region update_region;
+	struct dsi_update_region active_update_region;
+	struct completion update_completion;
+
+	enum omap_dss_update_mode user_update_mode;
+	enum omap_dss_update_mode update_mode;
+	bool te_enabled;
+	bool use_ext_te;
+
+	unsigned long cache_req_pck;
+	unsigned long cache_clk_freq;
+	struct dsi_clock_info cache_cinfo;
+
+	u32		errors;
+	spinlock_t	errors_lock;
+#ifdef DEBUG
+	ktime_t perf_setup_time;
+	ktime_t perf_start_time;
+	ktime_t perf_start_time_auto;
+	int perf_measure_frames;
+#endif
+	int debug_read;
+	int debug_write;
+} dsi;
+
+#ifdef DEBUG
+static unsigned int dsi_perf;
+module_param_named(dsi_perf, dsi_perf, bool, 0644);
+#endif
+
+static inline void dsi_write_reg(const struct dsi_reg idx, u32 val)
+{
+	__raw_writel(val, dsi.base + idx.idx);
+}
+
+static inline u32 dsi_read_reg(const struct dsi_reg idx)
+{
+	return __raw_readl(dsi.base + idx.idx);
+}
+
+
+void dsi_save_context(void)
+{
+}
+
+void dsi_restore_context(void)
+{
+}
+
+void dsi_bus_lock(void)
+{
+	mutex_lock(&dsi.bus_lock);
+}
+EXPORT_SYMBOL(dsi_bus_lock);
+
+void dsi_bus_unlock(void)
+{
+	mutex_unlock(&dsi.bus_lock);
+}
+EXPORT_SYMBOL(dsi_bus_unlock);
+
+static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum,
+		int value)
+{
+	int t = 100000;
+
+	while (REG_GET(idx, bitnum, bitnum) != value) {
+		if (--t == 0)
+			return !value;
+	}
+
+	return value;
+}
+
+#ifdef DEBUG
+static void dsi_perf_mark_setup(void)
+{
+	dsi.perf_setup_time = ktime_get();
+}
+
+static void dsi_perf_mark_start(void)
+{
+	dsi.perf_start_time = ktime_get();
+}
+
+static void dsi_perf_mark_start_auto(void)
+{
+	dsi.perf_measure_frames = 0;
+	dsi.perf_start_time_auto = ktime_get();
+}
+
+static void dsi_perf_show(const char *name)
+{
+	ktime_t t, setup_time, trans_time;
+	u32 total_bytes;
+	u32 setup_us, trans_us, total_us;
+
+	if (!dsi_perf)
+		return;
+
+	if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
+		return;
+
+	t = ktime_get();
+
+	setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time);
+	setup_us = (u32)ktime_to_us(setup_time);
+	if (setup_us == 0)
+		setup_us = 1;
+
+	trans_time = ktime_sub(t, dsi.perf_start_time);
+	trans_us = (u32)ktime_to_us(trans_time);
+	if (trans_us == 0)
+		trans_us = 1;
+
+	total_us = setup_us + trans_us;
+
+	total_bytes = dsi.active_update_region.w *
+		dsi.active_update_region.h *
+		dsi.active_update_region.device->ctrl.pixel_size / 8;
+
+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
+		static u32 s_total_trans_us, s_total_setup_us;
+		static u32 s_min_trans_us = 0xffffffff, s_min_setup_us;
+		static u32 s_max_trans_us, s_max_setup_us;
+		const int numframes = 100;
+		ktime_t total_time_auto;
+		u32 total_time_auto_us;
+
+		dsi.perf_measure_frames++;
+
+		if (setup_us < s_min_setup_us)
+			s_min_setup_us = setup_us;
+
+		if (setup_us > s_max_setup_us)
+			s_max_setup_us = setup_us;
+
+		s_total_setup_us += setup_us;
+
+		if (trans_us < s_min_trans_us)
+			s_min_trans_us = trans_us;
+
+		if (trans_us > s_max_trans_us)
+			s_max_trans_us = trans_us;
+
+		s_total_trans_us += trans_us;
+
+		if (dsi.perf_measure_frames < numframes)
+			return;
+
+		total_time_auto = ktime_sub(t, dsi.perf_start_time_auto);
+		total_time_auto_us = (u32)ktime_to_us(total_time_auto);
+
+		printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, "
+				"trans %u/%u/%u\n",
+				name,
+				1000 * 1000 * numframes / total_time_auto_us,
+				s_min_setup_us,
+				s_max_setup_us,
+				s_total_setup_us / numframes,
+				s_min_trans_us,
+				s_max_trans_us,
+				s_total_trans_us / numframes);
+
+		s_total_setup_us = 0;
+		s_min_setup_us = 0xffffffff;
+		s_max_setup_us = 0;
+		s_total_trans_us = 0;
+		s_min_trans_us = 0xffffffff;
+		s_max_trans_us = 0;
+		dsi_perf_mark_start_auto();
+	} else {
+		printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
+				"%u bytes, %u kbytes/sec\n",
+				name,
+				setup_us,
+				trans_us,
+				total_us,
+				1000*1000 / total_us,
+				total_bytes,
+				total_bytes * 1000 / total_us);
+	}
+}
+#else
+#define dsi_perf_mark_setup()
+#define dsi_perf_mark_start()
+#define dsi_perf_mark_start_auto()
+#define dsi_perf_show(x)
+#endif
+
+static void print_irq_status(u32 status)
+{
+#ifndef VERBOSE_IRQ
+	if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0)
+		return;
+#endif
+	printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status);
+
+#define PIS(x) \
+	if (status & DSI_IRQ_##x) \
+		printk(#x " ");
+#ifdef VERBOSE_IRQ
+	PIS(VC0);
+	PIS(VC1);
+	PIS(VC2);
+	PIS(VC3);
+#endif
+	PIS(WAKEUP);
+	PIS(RESYNC);
+	PIS(PLL_LOCK);
+	PIS(PLL_UNLOCK);
+	PIS(PLL_RECALL);
+	PIS(COMPLEXIO_ERR);
+	PIS(HS_TX_TIMEOUT);
+	PIS(LP_RX_TIMEOUT);
+	PIS(TE_TRIGGER);
+	PIS(ACK_TRIGGER);
+	PIS(SYNC_LOST);
+	PIS(LDO_POWER_GOOD);
+	PIS(TA_TIMEOUT);
+#undef PIS
+
+	printk("\n");
+}
+
+static void print_irq_status_vc(int channel, u32 status)
+{
+#ifndef VERBOSE_IRQ
+	if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0)
+		return;
+#endif
+	printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status);
+
+#define PIS(x) \
+	if (status & DSI_VC_IRQ_##x) \
+		printk(#x " ");
+	PIS(CS);
+	PIS(ECC_CORR);
+#ifdef VERBOSE_IRQ
+	PIS(PACKET_SENT);
+#endif
+	PIS(FIFO_TX_OVF);
+	PIS(FIFO_RX_OVF);
+	PIS(BTA);
+	PIS(ECC_NO_CORR);
+	PIS(FIFO_TX_UDF);
+	PIS(PP_BUSY_CHANGE);
+#undef PIS
+	printk("\n");
+}
+
+static void print_irq_status_cio(u32 status)
+{
+	printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status);
+
+#define PIS(x) \
+	if (status & DSI_CIO_IRQ_##x) \
+		printk(#x " ");
+	PIS(ERRSYNCESC1);
+	PIS(ERRSYNCESC2);
+	PIS(ERRSYNCESC3);
+	PIS(ERRESC1);
+	PIS(ERRESC2);
+	PIS(ERRESC3);
+	PIS(ERRCONTROL1);
+	PIS(ERRCONTROL2);
+	PIS(ERRCONTROL3);
+	PIS(STATEULPS1);
+	PIS(STATEULPS2);
+	PIS(STATEULPS3);
+	PIS(ERRCONTENTIONLP0_1);
+	PIS(ERRCONTENTIONLP1_1);
+	PIS(ERRCONTENTIONLP0_2);
+	PIS(ERRCONTENTIONLP1_2);
+	PIS(ERRCONTENTIONLP0_3);
+	PIS(ERRCONTENTIONLP1_3);
+	PIS(ULPSACTIVENOT_ALL0);
+	PIS(ULPSACTIVENOT_ALL1);
+#undef PIS
+
+	printk("\n");
+}
+
+static int debug_irq;
+
+/* called from dss */
+void dsi_irq_handler(void)
+{
+	u32 irqstatus, vcstatus, ciostatus;
+	int i;
+
+	irqstatus = dsi_read_reg(DSI_IRQSTATUS);
+
+	if (irqstatus & DSI_IRQ_ERROR_MASK) {
+		DSSERR("DSI error, irqstatus %x\n", irqstatus);
+		print_irq_status(irqstatus);
+		spin_lock(&dsi.errors_lock);
+		dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK;
+		spin_unlock(&dsi.errors_lock);
+	} else if (debug_irq) {
+		print_irq_status(irqstatus);
+	}
+
+	for (i = 0; i < 4; ++i) {
+		if ((irqstatus & (1<<i)) == 0)
+			continue;
+
+		vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i));
+
+		if (vcstatus & DSI_VC_IRQ_BTA)
+			complete(&dsi.bta_completion);
+
+		if (vcstatus & DSI_VC_IRQ_ERROR_MASK) {
+			DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
+				       i, vcstatus);
+			print_irq_status_vc(i, vcstatus);
+		} else if (debug_irq) {
+			print_irq_status_vc(i, vcstatus);
+		}
+
+		dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus);
+	}
+
+	if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) {
+		ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
+
+		dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus);
+
+		DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
+		print_irq_status_cio(ciostatus);
+	}
+
+	dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
+}
+
+
+static void _dsi_initialize_irq(void)
+{
+	u32 l;
+	int i;
+
+	/* disable all interrupts */
+	dsi_write_reg(DSI_IRQENABLE, 0);
+	for (i = 0; i < 4; ++i)
+		dsi_write_reg(DSI_VC_IRQENABLE(i), 0);
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0);
+
+	/* clear interrupt status */
+	l = dsi_read_reg(DSI_IRQSTATUS);
+	dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK);
+
+	for (i = 0; i < 4; ++i) {
+		l = dsi_read_reg(DSI_VC_IRQSTATUS(i));
+		dsi_write_reg(DSI_VC_IRQSTATUS(i), l);
+	}
+
+	l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l);
+
+	/* enable error irqs */
+	l = DSI_IRQ_ERROR_MASK;
+	dsi_write_reg(DSI_IRQENABLE, l);
+
+	l = DSI_VC_IRQ_ERROR_MASK;
+	for (i = 0; i < 4; ++i)
+		dsi_write_reg(DSI_VC_IRQENABLE(i), l);
+
+	/* XXX zonda responds incorrectly, causing control error:
+	   Exit from LP-ESC mode to LP11 uses wrong transition states on the
+	   data lines LP0 and LN0. */
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
+			-1 & (~DSI_CIO_IRQ_ERRCONTROL2));
+}
+
+static u32 dsi_get_errors(void)
+{
+	unsigned long flags;
+	u32 e;
+	spin_lock_irqsave(&dsi.errors_lock, flags);
+	e = dsi.errors;
+	dsi.errors = 0;
+	spin_unlock_irqrestore(&dsi.errors_lock, flags);
+	return e;
+}
+
+static void dsi_vc_enable_bta_irq(int channel)
+{
+	u32 l;
+
+	dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA);
+
+	l = dsi_read_reg(DSI_VC_IRQENABLE(channel));
+	l |= DSI_VC_IRQ_BTA;
+	dsi_write_reg(DSI_VC_IRQENABLE(channel), l);
+}
+
+static void dsi_vc_disable_bta_irq(int channel)
+{
+	u32 l;
+
+	l = dsi_read_reg(DSI_VC_IRQENABLE(channel));
+	l &= ~DSI_VC_IRQ_BTA;
+	dsi_write_reg(DSI_VC_IRQENABLE(channel), l);
+}
+
+/* DSI func clock. this could also be DSI2_PLL_FCLK */
+static inline void enable_clocks(bool enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	else
+		dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+/* source clock for DSI PLL. this could also be PCLKFREE */
+static inline void dsi_enable_pll_clock(bool enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_FCK2);
+	else
+		dss_clk_disable(DSS_CLK_FCK2);
+
+	if (enable && dsi.pll_locked) {
+		if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1)
+			DSSERR("cannot lock PLL when enabling clocks\n");
+	}
+}
+
+#ifdef DEBUG
+static void _dsi_print_reset_status(void)
+{
+	u32 l;
+
+	if (!dss_debug)
+		return;
+
+	/* A dummy read using the SCP interface to any DSIPHY register is
+	 * required after DSIPHY reset to complete the reset of the DSI complex
+	 * I/O. */
+	l = dsi_read_reg(DSI_DSIPHY_CFG5);
+
+	printk(KERN_DEBUG "DSI resets: ");
+
+	l = dsi_read_reg(DSI_PLL_STATUS);
+	printk("PLL (%d) ", FLD_GET(l, 0, 0));
+
+	l = dsi_read_reg(DSI_COMPLEXIO_CFG1);
+	printk("CIO (%d) ", FLD_GET(l, 29, 29));
+
+	l = dsi_read_reg(DSI_DSIPHY_CFG5);
+	printk("PHY (%x, %d, %d, %d)\n",
+			FLD_GET(l, 28, 26),
+			FLD_GET(l, 29, 29),
+			FLD_GET(l, 30, 30),
+			FLD_GET(l, 31, 31));
+}
+#else
+#define _dsi_print_reset_status()
+#endif
+
+static inline int dsi_if_enable(bool enable)
+{
+	DSSDBG("dsi_if_enable(%d)\n", enable);
+
+	enable = enable ? 1 : 0;
+	REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */
+
+	if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) {
+			DSSERR("Failed to set dsi_if_enable to %d\n", enable);
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static unsigned long dsi_fclk_rate(void)
+{
+	unsigned long r;
+
+	if (dss_get_dsi_clk_source() == 0) {
+		/* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */
+		r = dss_clk_get_rate(DSS_CLK_FCK1);
+	} else {
+		/* DSI FCLK source is DSI2_PLL_FCLK */
+		r = dsi.dsi2_pll_fclk;
+	}
+
+	return r;
+}
+
+static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev)
+{
+	unsigned n;
+	unsigned long dsi_fclk;
+	unsigned long lp_clk, lp_clk_req;
+
+	dsi_fclk = dsi_fclk_rate();
+
+	lp_clk_req = dssdev->phy.dsi.lp_clk_hz;
+
+	for (n = 1; n < (1 << 13) - 1; ++n) {
+		lp_clk = dsi_fclk / 2 / n;
+		if (lp_clk <= lp_clk_req)
+			break;
+	}
+
+	if (n == (1 << 13) - 1) {
+		DSSERR("Failed to find LP_CLK_DIVISOR\n");
+		return -EINVAL;
+	}
+
+	DSSDBG("LP_CLK_DIV %u, LP_CLK %lu (req %lu)\n", n, lp_clk, lp_clk_req);
+
+	REG_FLD_MOD(DSI_CLK_CTRL, n, 12, 0);	/* LP_CLK_DIVISOR */
+	if (dsi_fclk > 30*1000*1000)
+		REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */
+
+	return 0;
+}
+
+
+enum dsi_pll_power_state {
+	DSI_PLL_POWER_OFF	= 0x0,
+	DSI_PLL_POWER_ON_HSCLK	= 0x1,
+	DSI_PLL_POWER_ON_ALL	= 0x2,
+	DSI_PLL_POWER_ON_DIV	= 0x3,
+};
+
+static int dsi_pll_power(enum dsi_pll_power_state state)
+{
+	int t = 0;
+
+	REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30);	/* PLL_PWR_CMD */
+
+	/* PLL_PWR_STATUS */
+	while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) {
+		udelay(1);
+		if (t++ > 1000) {
+			DSSERR("Failed to set DSI PLL power mode to %d\n",
+					state);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
+		struct dsi_clock_info *cinfo)
+{
+	struct dsi_clock_info cur, best;
+	int min_fck_per_pck;
+	int match = 0;
+	unsigned long dss_clk_fck2;
+
+	dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2);
+
+	if (req_pck == dsi.cache_req_pck &&
+			dsi.cache_cinfo.clkin == dss_clk_fck2) {
+		DSSDBG("DSI clock info found from cache\n");
+		*cinfo = dsi.cache_cinfo;
+		return 0;
+	}
+
+	min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
+
+	if (min_fck_per_pck &&
+		req_pck * min_fck_per_pck > DISPC_MAX_FCK) {
+		DSSERR("Requested pixel clock not possible with the current "
+				"OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
+				"the constraint off.\n");
+		min_fck_per_pck = 0;
+	}
+
+	DSSDBG("dsi_pll_calc\n");
+
+retry:
+	memset(&best, 0, sizeof(best));
+
+	memset(&cur, 0, sizeof(cur));
+	cur.clkin = dss_clk_fck2;
+	cur.use_dss2_fck = 1;
+	cur.highfreq = 0;
+
+	/* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
+	/* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
+	/* To reduce PLL lock time, keep Fint high (around 2 MHz) */
+	for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) {
+		if (cur.highfreq == 0)
+			cur.fint = cur.clkin / cur.regn;
+		else
+			cur.fint = cur.clkin / (2 * cur.regn);
+
+		if (cur.fint > FINT_MAX || cur.fint < FINT_MIN)
+			continue;
+
+		/* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
+		for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) {
+			unsigned long a, b;
+
+			a = 2 * cur.regm * (cur.clkin/1000);
+			b = cur.regn * (cur.highfreq + 1);
+			cur.dsiphy = a / b * 1000;
+
+			if (cur.dsiphy > 1800 * 1000 * 1000)
+				break;
+
+			/* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3  < 173MHz */
+			for (cur.regm3 = 1; cur.regm3 < REGM3_MAX;
+					++cur.regm3) {
+				cur.dsi1_pll_fclk = cur.dsiphy / cur.regm3;
+
+				/* this will narrow down the search a bit,
+				 * but still give pixclocks below what was
+				 * requested */
+				if (cur.dsi1_pll_fclk  < req_pck)
+					break;
+
+				if (cur.dsi1_pll_fclk > DISPC_MAX_FCK)
+					continue;
+
+				if (min_fck_per_pck &&
+					cur.dsi1_pll_fclk <
+						req_pck * min_fck_per_pck)
+					continue;
+
+				match = 1;
+
+				find_lck_pck_divs(is_tft, req_pck,
+						cur.dsi1_pll_fclk,
+						&cur.lck_div,
+						&cur.pck_div);
+
+				cur.lck = cur.dsi1_pll_fclk / cur.lck_div;
+				cur.pck = cur.lck / cur.pck_div;
+
+				if (abs(cur.pck - req_pck) <
+						abs(best.pck - req_pck)) {
+					best = cur;
+
+					if (cur.pck == req_pck)
+						goto found;
+				}
+			}
+		}
+	}
+found:
+	if (!match) {
+		if (min_fck_per_pck) {
+			DSSERR("Could not find suitable clock settings.\n"
+					"Turning FCK/PCK constraint off and"
+					"trying again.\n");
+			min_fck_per_pck = 0;
+			goto retry;
+		}
+
+		DSSERR("Could not find suitable clock settings.\n");
+
+		return -EINVAL;
+	}
+
+	/* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
+	best.regm4 = best.dsiphy / 48000000;
+	if (best.regm4 > REGM4_MAX)
+		best.regm4 = REGM4_MAX;
+	else if (best.regm4 == 0)
+		best.regm4 = 1;
+	best.dsi2_pll_fclk = best.dsiphy / best.regm4;
+
+	if (cinfo)
+		*cinfo = best;
+
+	dsi.cache_req_pck = req_pck;
+	dsi.cache_clk_freq = 0;
+	dsi.cache_cinfo = best;
+
+	return 0;
+}
+
+static int dsi_pll_calc_ddrfreq(unsigned long clk_freq,
+		struct dsi_clock_info *cinfo)
+{
+	struct dsi_clock_info cur, best;
+	const bool use_dss2_fck = 1;
+	unsigned long datafreq;
+	unsigned long dss_clk_fck2;
+
+	DSSDBG("dsi_pll_calc_ddrfreq\n");
+
+	dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2);
+
+	if (clk_freq == dsi.cache_clk_freq &&
+			dsi.cache_cinfo.clkin == dss_clk_fck2) {
+		DSSDBG("DSI clock info found from cache\n");
+		*cinfo = dsi.cache_cinfo;
+		return 0;
+	}
+
+	datafreq = clk_freq * 4;
+
+	memset(&best, 0, sizeof(best));
+
+	memset(&cur, 0, sizeof(cur));
+	cur.use_dss2_fck = use_dss2_fck;
+	if (use_dss2_fck) {
+		cur.clkin = dss_clk_fck2;
+		cur.highfreq = 0;
+	} else {
+		cur.clkin = dispc_pclk_rate();
+		if (cur.clkin < 32000000)
+			cur.highfreq = 0;
+		else
+			cur.highfreq = 1;
+	}
+
+	/* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
+	/* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
+	/* To reduce PLL lock time, keep Fint high (around 2 MHz) */
+	for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) {
+		if (cur.highfreq == 0)
+			cur.fint = cur.clkin / cur.regn;
+		else
+			cur.fint = cur.clkin / (2 * cur.regn);
+
+		if (cur.fint > FINT_MAX || cur.fint < FINT_MIN)
+			continue;
+
+		/* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
+		for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) {
+			unsigned long a, b;
+
+			a = 2 * cur.regm * (cur.clkin/1000);
+			b = cur.regn * (cur.highfreq + 1);
+			cur.dsiphy = a / b * 1000;
+
+			if (cur.dsiphy > 1800 * 1000 * 1000)
+				break;
+
+			if (abs(cur.dsiphy - datafreq) <
+					abs(best.dsiphy - datafreq)) {
+				best = cur;
+				/* DSSDBG("best %ld\n", best.dsiphy); */
+			}
+
+			if (cur.dsiphy == datafreq)
+				goto found;
+		}
+	}
+found:
+	/* DSI1_PLL_FCLK (regm3) is not used. Set it to something sane. */
+	best.regm3 = best.dsiphy / 48000000;
+	if (best.regm3 > REGM3_MAX)
+		best.regm3 = REGM3_MAX;
+	else if (best.regm3 == 0)
+		best.regm3 = 1;
+	best.dsi1_pll_fclk = best.dsiphy / best.regm3;
+
+	/* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
+	best.regm4 = best.dsiphy / 48000000;
+	if (best.regm4 > REGM4_MAX)
+		best.regm4 = REGM4_MAX;
+	else if (best.regm4 == 0)
+		best.regm4 = 1;
+	best.dsi2_pll_fclk = best.dsiphy / best.regm4;
+
+	if (cinfo)
+		*cinfo = best;
+
+	dsi.cache_clk_freq = clk_freq;
+	dsi.cache_req_pck = 0;
+	dsi.cache_cinfo = best;
+
+	return 0;
+}
+
+int dsi_pll_program(struct dsi_clock_info *cinfo)
+{
+	int r = 0;
+	u32 l;
+
+	DSSDBG("dsi_pll_program\n");
+
+	dsi.dsiphy = cinfo->dsiphy;
+	dsi.ddr_clk = dsi.dsiphy / 4;
+	dsi.dsi1_pll_fclk = cinfo->dsi1_pll_fclk;
+	dsi.dsi2_pll_fclk = cinfo->dsi2_pll_fclk;
+
+	DSSDBG("DSI Fint %ld\n", cinfo->fint);
+
+	DSSDBG("clkin (%s) rate %ld, highfreq %d\n",
+			cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree",
+			cinfo->clkin,
+			cinfo->highfreq);
+
+	/* DSIPHY == CLKIN4DDR */
+	DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n",
+			cinfo->regm,
+			cinfo->regn,
+			cinfo->clkin,
+			cinfo->highfreq + 1,
+			cinfo->dsiphy);
+
+	DSSDBG("Data rate on 1 DSI lane %ld Mbps\n",
+			dsi.dsiphy / 1000 / 1000 / 2);
+
+	DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk);
+
+	DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n",
+			cinfo->regm3, cinfo->dsi1_pll_fclk);
+	DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n",
+			cinfo->regm4, cinfo->dsi2_pll_fclk);
+
+	REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */
+
+	l = dsi_read_reg(DSI_PLL_CONFIGURATION1);
+	l = FLD_MOD(l, 1, 0, 0);		/* DSI_PLL_STOPMODE */
+	l = FLD_MOD(l, cinfo->regn - 1, 7, 1);	/* DSI_PLL_REGN */
+	l = FLD_MOD(l, cinfo->regm, 18, 8);	/* DSI_PLL_REGM */
+	l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19);	/* DSI_CLOCK_DIV */
+	l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23);	/* DSIPROTO_CLOCK_DIV */
+	dsi_write_reg(DSI_PLL_CONFIGURATION1, l);
+
+	l = dsi_read_reg(DSI_PLL_CONFIGURATION2);
+	l = FLD_MOD(l, 7, 4, 1);		/* DSI_PLL_FREQSEL */
+	/* DSI_PLL_CLKSEL */
+	l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11);
+	l = FLD_MOD(l, cinfo->highfreq, 12, 12);	/* DSI_PLL_HIGHFREQ */
+	l = FLD_MOD(l, 1, 13, 13);		/* DSI_PLL_REFEN */
+	l = FLD_MOD(l, 0, 14, 14);		/* DSIPHY_CLKINEN */
+	l = FLD_MOD(l, 1, 20, 20);		/* DSI_HSDIVBYPASS */
+	dsi_write_reg(DSI_PLL_CONFIGURATION2, l);
+
+	REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */
+
+	if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) {
+		DSSERR("dsi pll go bit not going down.\n");
+		r = -EIO;
+		goto err;
+	}
+
+	if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) {
+		DSSERR("cannot lock PLL\n");
+		r = -EIO;
+		goto err;
+	}
+
+	dsi.pll_locked = 1;
+
+	l = dsi_read_reg(DSI_PLL_CONFIGURATION2);
+	l = FLD_MOD(l, 0, 0, 0);	/* DSI_PLL_IDLE */
+	l = FLD_MOD(l, 0, 5, 5);	/* DSI_PLL_PLLLPMODE */
+	l = FLD_MOD(l, 0, 6, 6);	/* DSI_PLL_LOWCURRSTBY */
+	l = FLD_MOD(l, 0, 7, 7);	/* DSI_PLL_TIGHTPHASELOCK */
+	l = FLD_MOD(l, 0, 8, 8);	/* DSI_PLL_DRIFTGUARDEN */
+	l = FLD_MOD(l, 0, 10, 9);	/* DSI_PLL_LOCKSEL */
+	l = FLD_MOD(l, 1, 13, 13);	/* DSI_PLL_REFEN */
+	l = FLD_MOD(l, 1, 14, 14);	/* DSIPHY_CLKINEN */
+	l = FLD_MOD(l, 0, 15, 15);	/* DSI_BYPASSEN */
+	l = FLD_MOD(l, 1, 16, 16);	/* DSS_CLOCK_EN */
+	l = FLD_MOD(l, 0, 17, 17);	/* DSS_CLOCK_PWDN */
+	l = FLD_MOD(l, 1, 18, 18);	/* DSI_PROTO_CLOCK_EN */
+	l = FLD_MOD(l, 0, 19, 19);	/* DSI_PROTO_CLOCK_PWDN */
+	l = FLD_MOD(l, 0, 20, 20);	/* DSI_HSDIVBYPASS */
+	dsi_write_reg(DSI_PLL_CONFIGURATION2, l);
+
+	DSSDBG("PLL config done\n");
+err:
+	return r;
+}
+
+int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
+{
+	int r = 0;
+	enum dsi_pll_power_state pwstate;
+	struct dispc_clock_info cinfo;
+
+	DSSDBG("PLL init\n");
+
+	enable_clocks(1);
+	dsi_enable_pll_clock(1);
+
+	/* XXX this should be calculated depending on the screen size,
+	 * required framerate and DSI speed.
+	 * For now 48MHz is enough for 864x480@60 with 360Mbps/lane
+	 * with two lanes */
+	r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo);
+	if (r)
+		goto err0;
+
+	r = dispc_set_clock_div(&cinfo);
+	if (r) {
+		DSSERR("Failed to set basic clocks\n");
+		goto err0;
+	}
+
+	r = regulator_enable(dsi.vdds_dsi_reg);
+	if (r)
+		goto err0;
+
+	/* XXX PLL does not come out of reset without this... */
+	dispc_pck_free_enable(1);
+
+	if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
+		DSSERR("PLL not coming out of reset.\n");
+		r = -ENODEV;
+		goto err1;
+	}
+
+	/* XXX ... but if left on, we get problems when planes do not
+	 * fill the whole display. No idea about this */
+	dispc_pck_free_enable(0);
+
+	if (enable_hsclk && enable_hsdiv)
+		pwstate = DSI_PLL_POWER_ON_ALL;
+	else if (enable_hsclk)
+		pwstate = DSI_PLL_POWER_ON_HSCLK;
+	else if (enable_hsdiv)
+		pwstate = DSI_PLL_POWER_ON_DIV;
+	else
+		pwstate = DSI_PLL_POWER_OFF;
+
+	r = dsi_pll_power(pwstate);
+
+	if (r)
+		goto err1;
+
+	DSSDBG("PLL init done\n");
+
+	return 0;
+err1:
+	regulator_disable(dsi.vdds_dsi_reg);
+err0:
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+	return r;
+}
+
+void dsi_pll_uninit(void)
+{
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+
+	dsi.pll_locked = 0;
+	dsi_pll_power(DSI_PLL_POWER_OFF);
+	regulator_disable(dsi.vdds_dsi_reg);
+	DSSDBG("PLL uninit done\n");
+}
+
+unsigned long dsi_get_dsi1_pll_rate(void)
+{
+	return dsi.dsi1_pll_fclk;
+}
+
+unsigned long dsi_get_dsi2_pll_rate(void)
+{
+	return dsi.dsi2_pll_fclk;
+}
+
+void dsi_dump_clocks(struct seq_file *s)
+{
+	int clksel;
+
+	enable_clocks(1);
+
+	clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11);
+
+	seq_printf(s, "- dsi -\n");
+
+	seq_printf(s, "dsi fclk source = %s\n",
+			dss_get_dsi_clk_source() == 0 ?
+			"dss1_alwon_fclk" : "dsi2_pll_fclk");
+
+	seq_printf(s, "dsi pll source = %s\n",
+			clksel == 0 ?
+			"dss2_alwon_fclk" : "pclkfree");
+
+	seq_printf(s,	"DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n",
+			dsi.dsiphy, dsi.ddr_clk);
+
+	seq_printf(s,	"dsi1_pll_fck\t%lu (%s)\n"
+			"dsi2_pll_fck\t%lu (%s)\n",
+			dsi.dsi1_pll_fclk,
+			dss_get_dispc_clk_source() == 0 ? "off" : "on",
+			dsi.dsi2_pll_fclk,
+			dss_get_dsi_clk_source() == 0 ? "off" : "on");
+
+	enable_clocks(0);
+}
+
+void dsi_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r))
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	DUMPREG(DSI_REVISION);
+	DUMPREG(DSI_SYSCONFIG);
+	DUMPREG(DSI_SYSSTATUS);
+	DUMPREG(DSI_IRQSTATUS);
+	DUMPREG(DSI_IRQENABLE);
+	DUMPREG(DSI_CTRL);
+	DUMPREG(DSI_COMPLEXIO_CFG1);
+	DUMPREG(DSI_COMPLEXIO_IRQ_STATUS);
+	DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE);
+	DUMPREG(DSI_CLK_CTRL);
+	DUMPREG(DSI_TIMING1);
+	DUMPREG(DSI_TIMING2);
+	DUMPREG(DSI_VM_TIMING1);
+	DUMPREG(DSI_VM_TIMING2);
+	DUMPREG(DSI_VM_TIMING3);
+	DUMPREG(DSI_CLK_TIMING);
+	DUMPREG(DSI_TX_FIFO_VC_SIZE);
+	DUMPREG(DSI_RX_FIFO_VC_SIZE);
+	DUMPREG(DSI_COMPLEXIO_CFG2);
+	DUMPREG(DSI_RX_FIFO_VC_FULLNESS);
+	DUMPREG(DSI_VM_TIMING4);
+	DUMPREG(DSI_TX_FIFO_VC_EMPTINESS);
+	DUMPREG(DSI_VM_TIMING5);
+	DUMPREG(DSI_VM_TIMING6);
+	DUMPREG(DSI_VM_TIMING7);
+	DUMPREG(DSI_STOPCLK_TIMING);
+
+	DUMPREG(DSI_VC_CTRL(0));
+	DUMPREG(DSI_VC_TE(0));
+	DUMPREG(DSI_VC_LONG_PACKET_HEADER(0));
+	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0));
+	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0));
+	DUMPREG(DSI_VC_IRQSTATUS(0));
+	DUMPREG(DSI_VC_IRQENABLE(0));
+
+	DUMPREG(DSI_VC_CTRL(1));
+	DUMPREG(DSI_VC_TE(1));
+	DUMPREG(DSI_VC_LONG_PACKET_HEADER(1));
+	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1));
+	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1));
+	DUMPREG(DSI_VC_IRQSTATUS(1));
+	DUMPREG(DSI_VC_IRQENABLE(1));
+
+	DUMPREG(DSI_VC_CTRL(2));
+	DUMPREG(DSI_VC_TE(2));
+	DUMPREG(DSI_VC_LONG_PACKET_HEADER(2));
+	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2));
+	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2));
+	DUMPREG(DSI_VC_IRQSTATUS(2));
+	DUMPREG(DSI_VC_IRQENABLE(2));
+
+	DUMPREG(DSI_VC_CTRL(3));
+	DUMPREG(DSI_VC_TE(3));
+	DUMPREG(DSI_VC_LONG_PACKET_HEADER(3));
+	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3));
+	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3));
+	DUMPREG(DSI_VC_IRQSTATUS(3));
+	DUMPREG(DSI_VC_IRQENABLE(3));
+
+	DUMPREG(DSI_DSIPHY_CFG0);
+	DUMPREG(DSI_DSIPHY_CFG1);
+	DUMPREG(DSI_DSIPHY_CFG2);
+	DUMPREG(DSI_DSIPHY_CFG5);
+
+	DUMPREG(DSI_PLL_CONTROL);
+	DUMPREG(DSI_PLL_STATUS);
+	DUMPREG(DSI_PLL_GO);
+	DUMPREG(DSI_PLL_CONFIGURATION1);
+	DUMPREG(DSI_PLL_CONFIGURATION2);
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+enum dsi_complexio_power_state {
+	DSI_COMPLEXIO_POWER_OFF		= 0x0,
+	DSI_COMPLEXIO_POWER_ON		= 0x1,
+	DSI_COMPLEXIO_POWER_ULPS	= 0x2,
+};
+
+static int dsi_complexio_power(enum dsi_complexio_power_state state)
+{
+	int t = 0;
+
+	/* PWR_CMD */
+	REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27);
+
+	/* PWR_STATUS */
+	while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) {
+		udelay(1);
+		if (t++ > 1000) {
+			DSSERR("failed to set complexio power state to "
+					"%d\n", state);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static void dsi_complexio_config(struct omap_dss_device *dssdev)
+{
+	u32 r;
+
+	int clk_lane   = dssdev->phy.dsi.clk_lane;
+	int data1_lane = dssdev->phy.dsi.data1_lane;
+	int data2_lane = dssdev->phy.dsi.data2_lane;
+	int clk_pol    = dssdev->phy.dsi.clk_pol;
+	int data1_pol  = dssdev->phy.dsi.data1_pol;
+	int data2_pol  = dssdev->phy.dsi.data2_pol;
+
+	r = dsi_read_reg(DSI_COMPLEXIO_CFG1);
+	r = FLD_MOD(r, clk_lane, 2, 0);
+	r = FLD_MOD(r, clk_pol, 3, 3);
+	r = FLD_MOD(r, data1_lane, 6, 4);
+	r = FLD_MOD(r, data1_pol, 7, 7);
+	r = FLD_MOD(r, data2_lane, 10, 8);
+	r = FLD_MOD(r, data2_pol, 11, 11);
+	dsi_write_reg(DSI_COMPLEXIO_CFG1, r);
+
+	/* The configuration of the DSI complex I/O (number of data lanes,
+	   position, differential order) should not be changed while
+	   DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for
+	   the hardware to take into account a new configuration of the complex
+	   I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to
+	   follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1,
+	   then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set
+	   DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the
+	   DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the
+	   DSI complex I/O configuration is unknown. */
+
+	/*
+	REG_FLD_MOD(DSI_CTRL, 1, 0, 0);
+	REG_FLD_MOD(DSI_CTRL, 0, 0, 0);
+	REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20);
+	REG_FLD_MOD(DSI_CTRL, 1, 0, 0);
+	*/
+}
+
+static inline unsigned ns2ddr(unsigned ns)
+{
+	/* convert time in ns to ddr ticks, rounding up */
+	return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000;
+}
+
+static inline unsigned ddr2ns(unsigned ddr)
+{
+	return ddr * 1000 * 1000 / (dsi.ddr_clk / 1000);
+}
+
+static void dsi_complexio_timings(void)
+{
+	u32 r;
+	u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit;
+	u32 tlpx_half, tclk_trail, tclk_zero;
+	u32 tclk_prepare;
+
+	/* calculate timings */
+
+	/* 1 * DDR_CLK = 2 * UI */
+
+	/* min 40ns + 4*UI	max 85ns + 6*UI */
+	ths_prepare = ns2ddr(70) + 2;
+
+	/* min 145ns + 10*UI */
+	ths_prepare_ths_zero = ns2ddr(175) + 2;
+
+	/* min max(8*UI, 60ns+4*UI) */
+	ths_trail = ns2ddr(60) + 5;
+
+	/* min 100ns */
+	ths_exit = ns2ddr(145);
+
+	/* tlpx min 50n */
+	tlpx_half = ns2ddr(25);
+
+	/* min 60ns */
+	tclk_trail = ns2ddr(60) + 2;
+
+	/* min 38ns, max 95ns */
+	tclk_prepare = ns2ddr(65);
+
+	/* min tclk-prepare + tclk-zero = 300ns */
+	tclk_zero = ns2ddr(260);
+
+	DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n",
+		ths_prepare, ddr2ns(ths_prepare),
+		ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero));
+	DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n",
+			ths_trail, ddr2ns(ths_trail),
+			ths_exit, ddr2ns(ths_exit));
+
+	DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), "
+			"tclk_zero %u (%uns)\n",
+			tlpx_half, ddr2ns(tlpx_half),
+			tclk_trail, ddr2ns(tclk_trail),
+			tclk_zero, ddr2ns(tclk_zero));
+	DSSDBG("tclk_prepare %u (%uns)\n",
+			tclk_prepare, ddr2ns(tclk_prepare));
+
+	/* program timings */
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG0);
+	r = FLD_MOD(r, ths_prepare, 31, 24);
+	r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16);
+	r = FLD_MOD(r, ths_trail, 15, 8);
+	r = FLD_MOD(r, ths_exit, 7, 0);
+	dsi_write_reg(DSI_DSIPHY_CFG0, r);
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG1);
+	r = FLD_MOD(r, tlpx_half, 22, 16);
+	r = FLD_MOD(r, tclk_trail, 15, 8);
+	r = FLD_MOD(r, tclk_zero, 7, 0);
+	dsi_write_reg(DSI_DSIPHY_CFG1, r);
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG2);
+	r = FLD_MOD(r, tclk_prepare, 7, 0);
+	dsi_write_reg(DSI_DSIPHY_CFG2, r);
+}
+
+
+static int dsi_complexio_init(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("dsi_complexio_init\n");
+
+	/* CIO_CLK_ICG, enable L3 clk to CIO */
+	REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14);
+
+	/* A dummy read using the SCP interface to any DSIPHY register is
+	 * required after DSIPHY reset to complete the reset of the DSI complex
+	 * I/O. */
+	dsi_read_reg(DSI_DSIPHY_CFG5);
+
+	if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) {
+		DSSERR("ComplexIO PHY not coming out of reset.\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	dsi_complexio_config(dssdev);
+
+	r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON);
+
+	if (r)
+		goto err;
+
+	if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) {
+		DSSERR("ComplexIO not coming out of reset.\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) {
+		DSSERR("ComplexIO LDO power down.\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	dsi_complexio_timings();
+
+	/*
+	   The configuration of the DSI complex I/O (number of data lanes,
+	   position, differential order) should not be changed while
+	   DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the
+	   hardware to recognize a new configuration of the complex I/O (done
+	   in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow
+	   this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next
+	   reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20]
+	   LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN
+	   bit to 1. If the sequence is not followed, the DSi complex I/O
+	   configuration is undetermined.
+	   */
+	dsi_if_enable(1);
+	dsi_if_enable(0);
+	REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */
+	dsi_if_enable(1);
+	dsi_if_enable(0);
+
+	DSSDBG("CIO init done\n");
+err:
+	return r;
+}
+
+static void dsi_complexio_uninit(void)
+{
+	dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF);
+}
+
+static int _dsi_wait_reset(void)
+{
+	int i = 0;
+
+	while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
+		if (i++ > 5) {
+			DSSERR("soft reset failed\n");
+			return -ENODEV;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+static int _dsi_reset(void)
+{
+	/* Soft reset */
+	REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1);
+	return _dsi_wait_reset();
+}
+
+
+static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2,
+		enum fifo_size size3, enum fifo_size size4)
+{
+	u32 r = 0;
+	int add = 0;
+	int i;
+
+	dsi.vc[0].fifo_size = size1;
+	dsi.vc[1].fifo_size = size2;
+	dsi.vc[2].fifo_size = size3;
+	dsi.vc[3].fifo_size = size4;
+
+	for (i = 0; i < 4; i++) {
+		u8 v;
+		int size = dsi.vc[i].fifo_size;
+
+		if (add + size > 4) {
+			DSSERR("Illegal FIFO configuration\n");
+			BUG();
+		}
+
+		v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
+		r |= v << (8 * i);
+		/*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */
+		add += size;
+	}
+
+	dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r);
+}
+
+static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2,
+		enum fifo_size size3, enum fifo_size size4)
+{
+	u32 r = 0;
+	int add = 0;
+	int i;
+
+	dsi.vc[0].fifo_size = size1;
+	dsi.vc[1].fifo_size = size2;
+	dsi.vc[2].fifo_size = size3;
+	dsi.vc[3].fifo_size = size4;
+
+	for (i = 0; i < 4; i++) {
+		u8 v;
+		int size = dsi.vc[i].fifo_size;
+
+		if (add + size > 4) {
+			DSSERR("Illegal FIFO configuration\n");
+			BUG();
+		}
+
+		v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
+		r |= v << (8 * i);
+		/*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */
+		add += size;
+	}
+
+	dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r);
+}
+
+static int dsi_force_tx_stop_mode_io(void)
+{
+	u32 r;
+
+	r = dsi_read_reg(DSI_TIMING1);
+	r = FLD_MOD(r, 1, 15, 15);	/* FORCE_TX_STOP_MODE_IO */
+	dsi_write_reg(DSI_TIMING1, r);
+
+	if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) {
+		DSSERR("TX_STOP bit not going down\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void dsi_vc_print_status(int channel)
+{
+	u32 r;
+
+	r = dsi_read_reg(DSI_VC_CTRL(channel));
+	DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, "
+			"TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ",
+			channel,
+			FLD_GET(r, 5, 5),
+			FLD_GET(r, 6, 6),
+			FLD_GET(r, 15, 15),
+			FLD_GET(r, 16, 16),
+			FLD_GET(r, 20, 20));
+
+	r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS);
+	DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff);
+}
+
+static int dsi_vc_enable(int channel, bool enable)
+{
+	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
+		DSSDBG("dsi_vc_enable channel %d, enable %d\n",
+				channel, enable);
+
+	enable = enable ? 1 : 0;
+
+	REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0);
+
+	if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) {
+			DSSERR("Failed to set dsi_vc_enable to %d\n", enable);
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static void dsi_vc_initial_config(int channel)
+{
+	u32 r;
+
+	DSSDBGF("%d", channel);
+
+	r = dsi_read_reg(DSI_VC_CTRL(channel));
+
+	if (FLD_GET(r, 15, 15)) /* VC_BUSY */
+		DSSERR("VC(%d) busy when trying to configure it!\n",
+				channel);
+
+	r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */
+	r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN  */
+	r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */
+	r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */
+	r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */
+	r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */
+	r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */
+
+	r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */
+	r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */
+
+	dsi_write_reg(DSI_VC_CTRL(channel), r);
+
+	dsi.vc[channel].mode = DSI_VC_MODE_L4;
+}
+
+static void dsi_vc_config_l4(int channel)
+{
+	if (dsi.vc[channel].mode == DSI_VC_MODE_L4)
+		return;
+
+	DSSDBGF("%d", channel);
+
+	dsi_vc_enable(channel, 0);
+
+	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+		DSSERR("vc(%d) busy when trying to config for L4\n", channel);
+
+	REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
+
+	dsi_vc_enable(channel, 1);
+
+	dsi.vc[channel].mode = DSI_VC_MODE_L4;
+}
+
+static void dsi_vc_config_vp(int channel)
+{
+	if (dsi.vc[channel].mode == DSI_VC_MODE_VP)
+		return;
+
+	DSSDBGF("%d", channel);
+
+	dsi_vc_enable(channel, 0);
+
+	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+		DSSERR("vc(%d) busy when trying to config for VP\n", channel);
+
+	REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
+
+	dsi_vc_enable(channel, 1);
+
+	dsi.vc[channel].mode = DSI_VC_MODE_VP;
+}
+
+
+static void dsi_vc_enable_hs(int channel, bool enable)
+{
+	DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
+
+	dsi_vc_enable(channel, 0);
+	dsi_if_enable(0);
+
+	REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9);
+
+	dsi_vc_enable(channel, 1);
+	dsi_if_enable(1);
+
+	dsi_force_tx_stop_mode_io();
+}
+
+static void dsi_vc_flush_long_data(int channel)
+{
+	while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
+		u32 val;
+		val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
+		DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n",
+				(val >> 0) & 0xff,
+				(val >> 8) & 0xff,
+				(val >> 16) & 0xff,
+				(val >> 24) & 0xff);
+	}
+}
+
+static void dsi_show_rx_ack_with_err(u16 err)
+{
+	DSSERR("\tACK with ERROR (%#x):\n", err);
+	if (err & (1 << 0))
+		DSSERR("\t\tSoT Error\n");
+	if (err & (1 << 1))
+		DSSERR("\t\tSoT Sync Error\n");
+	if (err & (1 << 2))
+		DSSERR("\t\tEoT Sync Error\n");
+	if (err & (1 << 3))
+		DSSERR("\t\tEscape Mode Entry Command Error\n");
+	if (err & (1 << 4))
+		DSSERR("\t\tLP Transmit Sync Error\n");
+	if (err & (1 << 5))
+		DSSERR("\t\tHS Receive Timeout Error\n");
+	if (err & (1 << 6))
+		DSSERR("\t\tFalse Control Error\n");
+	if (err & (1 << 7))
+		DSSERR("\t\t(reserved7)\n");
+	if (err & (1 << 8))
+		DSSERR("\t\tECC Error, single-bit (corrected)\n");
+	if (err & (1 << 9))
+		DSSERR("\t\tECC Error, multi-bit (not corrected)\n");
+	if (err & (1 << 10))
+		DSSERR("\t\tChecksum Error\n");
+	if (err & (1 << 11))
+		DSSERR("\t\tData type not recognized\n");
+	if (err & (1 << 12))
+		DSSERR("\t\tInvalid VC ID\n");
+	if (err & (1 << 13))
+		DSSERR("\t\tInvalid Transmission Length\n");
+	if (err & (1 << 14))
+		DSSERR("\t\t(reserved14)\n");
+	if (err & (1 << 15))
+		DSSERR("\t\tDSI Protocol Violation\n");
+}
+
+static u16 dsi_vc_flush_receive_data(int channel)
+{
+	/* RX_FIFO_NOT_EMPTY */
+	while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
+		u32 val;
+		u8 dt;
+		val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
+		DSSDBG("\trawval %#08x\n", val);
+		dt = FLD_GET(val, 5, 0);
+		if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+			u16 err = FLD_GET(val, 23, 8);
+			dsi_show_rx_ack_with_err(err);
+		} else if (dt == DSI_DT_RX_SHORT_READ_1) {
+			DSSDBG("\tDCS short response, 1 byte: %#x\n",
+					FLD_GET(val, 23, 8));
+		} else if (dt == DSI_DT_RX_SHORT_READ_2) {
+			DSSDBG("\tDCS short response, 2 byte: %#x\n",
+					FLD_GET(val, 23, 8));
+		} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+			DSSDBG("\tDCS long response, len %d\n",
+					FLD_GET(val, 23, 8));
+			dsi_vc_flush_long_data(channel);
+		} else {
+			DSSERR("\tunknown datatype 0x%02x\n", dt);
+		}
+	}
+	return 0;
+}
+
+static int dsi_vc_send_bta(int channel)
+{
+	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO &&
+			(dsi.debug_write || dsi.debug_read))
+		DSSDBG("dsi_vc_send_bta %d\n", channel);
+
+	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+
+	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {	/* RX_FIFO_NOT_EMPTY */
+		DSSERR("rx fifo not empty when sending BTA, dumping data:\n");
+		dsi_vc_flush_receive_data(channel);
+	}
+
+	REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */
+
+	return 0;
+}
+
+int dsi_vc_send_bta_sync(int channel)
+{
+	int r = 0;
+	u32 err;
+
+	INIT_COMPLETION(dsi.bta_completion);
+
+	dsi_vc_enable_bta_irq(channel);
+
+	r = dsi_vc_send_bta(channel);
+	if (r)
+		goto err;
+
+	if (wait_for_completion_timeout(&dsi.bta_completion,
+				msecs_to_jiffies(500)) == 0) {
+		DSSERR("Failed to receive BTA\n");
+		r = -EIO;
+		goto err;
+	}
+
+	err = dsi_get_errors();
+	if (err) {
+		DSSERR("Error while sending BTA: %x\n", err);
+		r = -EIO;
+		goto err;
+	}
+err:
+	dsi_vc_disable_bta_irq(channel);
+
+	return r;
+}
+EXPORT_SYMBOL(dsi_vc_send_bta_sync);
+
+static inline void dsi_vc_write_long_header(int channel, u8 data_type,
+		u16 len, u8 ecc)
+{
+	u32 val;
+	u8 data_id;
+
+	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+
+	/*data_id = data_type | channel << 6; */
+	data_id = data_type | dsi.vc[channel].dest_per << 6;
+
+	val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
+		FLD_VAL(ecc, 31, 24);
+
+	dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val);
+}
+
+static inline void dsi_vc_write_long_payload(int channel,
+		u8 b1, u8 b2, u8 b3, u8 b4)
+{
+	u32 val;
+
+	val = b4 << 24 | b3 << 16 | b2 << 8  | b1 << 0;
+
+/*	DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n",
+			b1, b2, b3, b4, val); */
+
+	dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val);
+}
+
+static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len,
+		u8 ecc)
+{
+	/*u32 val; */
+	int i;
+	u8 *p;
+	int r = 0;
+	u8 b1, b2, b3, b4;
+
+	if (dsi.debug_write)
+		DSSDBG("dsi_vc_send_long, %d bytes\n", len);
+
+	/* len + header */
+	if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) {
+		DSSERR("unable to send long packet: packet too long.\n");
+		return -EINVAL;
+	}
+
+	dsi_vc_config_l4(channel);
+
+	dsi_vc_write_long_header(channel, data_type, len, ecc);
+
+	/*dsi_vc_print_status(0); */
+
+	p = data;
+	for (i = 0; i < len >> 2; i++) {
+		if (dsi.debug_write)
+			DSSDBG("\tsending full packet %d\n", i);
+		/*dsi_vc_print_status(0); */
+
+		b1 = *p++;
+		b2 = *p++;
+		b3 = *p++;
+		b4 = *p++;
+
+		dsi_vc_write_long_payload(channel, b1, b2, b3, b4);
+	}
+
+	i = len % 4;
+	if (i) {
+		b1 = 0; b2 = 0; b3 = 0;
+
+		if (dsi.debug_write)
+			DSSDBG("\tsending remainder bytes %d\n", i);
+
+		switch (i) {
+		case 3:
+			b1 = *p++;
+			b2 = *p++;
+			b3 = *p++;
+			break;
+		case 2:
+			b1 = *p++;
+			b2 = *p++;
+			break;
+		case 1:
+			b1 = *p++;
+			break;
+		}
+
+		dsi_vc_write_long_payload(channel, b1, b2, b3, 0);
+	}
+
+	return r;
+}
+
+static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc)
+{
+	u32 r;
+	u8 data_id;
+
+	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+
+	if (dsi.debug_write)
+		DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
+				channel,
+				data_type, data & 0xff, (data >> 8) & 0xff);
+
+	dsi_vc_config_l4(channel);
+
+	if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) {
+		DSSERR("ERROR FIFO FULL, aborting transfer\n");
+		return -EINVAL;
+	}
+
+	data_id = data_type | channel << 6;
+
+	r = (data_id << 0) | (data << 8) | (ecc << 24);
+
+	dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r);
+
+	return 0;
+}
+
+int dsi_vc_send_null(int channel)
+{
+	u8 nullpkg[] = {0, 0, 0, 0};
+	return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
+}
+EXPORT_SYMBOL(dsi_vc_send_null);
+
+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len)
+{
+	int r;
+
+	BUG_ON(len == 0);
+
+	if (len == 1) {
+		r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0,
+				data[0], 0);
+	} else if (len == 2) {
+		r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1,
+				data[0] | (data[1] << 8), 0);
+	} else {
+		/* 0x39 = DCS Long Write */
+		r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE,
+				data, len, 0);
+	}
+
+	return r;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
+
+int dsi_vc_dcs_write(int channel, u8 *data, int len)
+{
+	int r;
+
+	r = dsi_vc_dcs_write_nosync(channel, data, len);
+	if (r)
+		return r;
+
+	r = dsi_vc_send_bta_sync(channel);
+
+	return r;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write);
+
+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
+{
+	u32 val;
+	u8 dt;
+	int r;
+
+	if (dsi.debug_read)
+		DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd);
+
+	r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
+	if (r)
+		return r;
+
+	r = dsi_vc_send_bta_sync(channel);
+	if (r)
+		return r;
+
+	/* RX_FIFO_NOT_EMPTY */
+	if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) {
+		DSSERR("RX fifo empty when trying to read.\n");
+		return -EIO;
+	}
+
+	val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
+	if (dsi.debug_read)
+		DSSDBG("\theader: %08x\n", val);
+	dt = FLD_GET(val, 5, 0);
+	if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+		u16 err = FLD_GET(val, 23, 8);
+		dsi_show_rx_ack_with_err(err);
+		return -EIO;
+
+	} else if (dt == DSI_DT_RX_SHORT_READ_1) {
+		u8 data = FLD_GET(val, 15, 8);
+		if (dsi.debug_read)
+			DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
+
+		if (buflen < 1)
+			return -EIO;
+
+		buf[0] = data;
+
+		return 1;
+	} else if (dt == DSI_DT_RX_SHORT_READ_2) {
+		u16 data = FLD_GET(val, 23, 8);
+		if (dsi.debug_read)
+			DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
+
+		if (buflen < 2)
+			return -EIO;
+
+		buf[0] = data & 0xff;
+		buf[1] = (data >> 8) & 0xff;
+
+		return 2;
+	} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+		int w;
+		int len = FLD_GET(val, 23, 8);
+		if (dsi.debug_read)
+			DSSDBG("\tDCS long response, len %d\n", len);
+
+		if (len > buflen)
+			return -EIO;
+
+		/* two byte checksum ends the packet, not included in len */
+		for (w = 0; w < len + 2;) {
+			int b;
+			val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
+			if (dsi.debug_read)
+				DSSDBG("\t\t%02x %02x %02x %02x\n",
+						(val >> 0) & 0xff,
+						(val >> 8) & 0xff,
+						(val >> 16) & 0xff,
+						(val >> 24) & 0xff);
+
+			for (b = 0; b < 4; ++b) {
+				if (w < len)
+					buf[w] = (val >> (b * 8)) & 0xff;
+				/* we discard the 2 byte checksum */
+				++w;
+			}
+		}
+
+		return len;
+
+	} else {
+		DSSERR("\tunknown datatype 0x%02x\n", dt);
+		return -EIO;
+	}
+}
+EXPORT_SYMBOL(dsi_vc_dcs_read);
+
+
+int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
+{
+	return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
+			len, 0);
+}
+EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
+
+
+static int dsi_set_lp_rx_timeout(int ns, int x4, int x16)
+{
+	u32 r;
+	unsigned long fck;
+	int ticks;
+
+	/* ticks in DSI_FCK */
+
+	fck = dsi_fclk_rate();
+	ticks = (fck / 1000 / 1000) * ns / 1000;
+
+	if (ticks > 0x1fff) {
+		DSSERR("LP_TX_TO too high\n");
+		return -EINVAL;
+	}
+
+	r = dsi_read_reg(DSI_TIMING2);
+	r = FLD_MOD(r, 1, 15, 15);	/* LP_RX_TO */
+	r = FLD_MOD(r, x16, 14, 14);	/* LP_RX_TO_X16 */
+	r = FLD_MOD(r, x4, 13, 13);	/* LP_RX_TO_X4 */
+	r = FLD_MOD(r, ticks, 12, 0);	/* LP_RX_COUNTER */
+	dsi_write_reg(DSI_TIMING2, r);
+
+	DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n",
+			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
+			(fck / 1000 / 1000),
+			ticks);
+
+	return 0;
+}
+
+static int dsi_set_ta_timeout(int ns, int x8, int x16)
+{
+	u32 r;
+	unsigned long fck;
+	int ticks;
+
+	/* ticks in DSI_FCK */
+
+	fck = dsi_fclk_rate();
+	ticks = (fck / 1000 / 1000) * ns / 1000;
+
+	if (ticks > 0x1fff) {
+		DSSERR("TA_TO too high\n");
+		return -EINVAL;
+	}
+
+	r = dsi_read_reg(DSI_TIMING1);
+	r = FLD_MOD(r, 1, 31, 31);	/* TA_TO */
+	r = FLD_MOD(r, x16, 30, 30);	/* TA_TO_X16 */
+	r = FLD_MOD(r, x8, 29, 29);	/* TA_TO_X8 */
+	r = FLD_MOD(r, ticks, 28, 16);	/* TA_TO_COUNTER */
+	dsi_write_reg(DSI_TIMING1, r);
+
+	DSSDBG("TA_TO %ld ns (%#x ticks)\n",
+			(ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) /
+			(fck / 1000 / 1000),
+			ticks);
+
+	return 0;
+}
+
+static int dsi_set_stop_state_counter(int ns, int x4, int x16)
+{
+	u32 r;
+	unsigned long fck;
+	int ticks;
+
+	/* ticks in DSI_FCK */
+
+	fck = dsi_fclk_rate();
+	ticks = (fck / 1000 / 1000) * ns / 1000;
+
+	if (ticks > 0x1fff) {
+		DSSERR("STOP_STATE_COUNTER_IO too high\n");
+		return -EINVAL;
+	}
+
+	r = dsi_read_reg(DSI_TIMING1);
+	r = FLD_MOD(r, 1, 15, 15);	/* FORCE_TX_STOP_MODE_IO */
+	r = FLD_MOD(r, x16, 14, 14);	/* STOP_STATE_X16_IO */
+	r = FLD_MOD(r, x4, 13, 13);	/* STOP_STATE_X4_IO */
+	r = FLD_MOD(r, ticks, 12, 0);	/* STOP_STATE_COUNTER_IO */
+	dsi_write_reg(DSI_TIMING1, r);
+
+	DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n",
+			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
+			(fck / 1000 / 1000),
+			ticks);
+
+	return 0;
+}
+
+static int dsi_set_hs_tx_timeout(int ns, int x4, int x16)
+{
+	u32 r;
+	unsigned long fck;
+	int ticks;
+
+	/* ticks in TxByteClkHS */
+
+	fck = dsi.ddr_clk / 4;
+	ticks = (fck / 1000 / 1000) * ns / 1000;
+
+	if (ticks > 0x1fff) {
+		DSSERR("HS_TX_TO too high\n");
+		return -EINVAL;
+	}
+
+	r = dsi_read_reg(DSI_TIMING2);
+	r = FLD_MOD(r, 1, 31, 31);	/* HS_TX_TO */
+	r = FLD_MOD(r, x16, 30, 30);	/* HS_TX_TO_X16 */
+	r = FLD_MOD(r, x4, 29, 29);	/* HS_TX_TO_X8 (4 really) */
+	r = FLD_MOD(r, ticks, 28, 16);	/* HS_TX_TO_COUNTER */
+	dsi_write_reg(DSI_TIMING2, r);
+
+	DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n",
+			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
+			(fck / 1000 / 1000),
+			ticks);
+
+	return 0;
+}
+static int dsi_proto_config(struct omap_dss_device *dssdev)
+{
+	u32 r;
+	int buswidth = 0;
+	int div;
+
+	dsi_config_tx_fifo(DSI_FIFO_SIZE_128,
+			DSI_FIFO_SIZE_0,
+			DSI_FIFO_SIZE_0,
+			DSI_FIFO_SIZE_0);
+
+	dsi_config_rx_fifo(DSI_FIFO_SIZE_128,
+			DSI_FIFO_SIZE_0,
+			DSI_FIFO_SIZE_0,
+			DSI_FIFO_SIZE_0);
+
+	/* XXX what values for the timeouts? */
+	dsi_set_stop_state_counter(1000, 0, 0);
+
+	dsi_set_ta_timeout(50000, 1, 1);
+
+	/* 3000ns * 16 */
+	dsi_set_lp_rx_timeout(3000, 0, 1);
+
+	/* 10000ns * 4 */
+	dsi_set_hs_tx_timeout(10000, 1, 0);
+
+	switch (dssdev->ctrl.pixel_size) {
+	case 16:
+		buswidth = 0;
+		break;
+	case 18:
+		buswidth = 1;
+		break;
+	case 24:
+		buswidth = 2;
+		break;
+	default:
+		BUG();
+	}
+
+	r = dsi_read_reg(DSI_CTRL);
+	r = FLD_MOD(r, 1, 1, 1);	/* CS_RX_EN */
+	r = FLD_MOD(r, 1, 2, 2);	/* ECC_RX_EN */
+	r = FLD_MOD(r, 1, 3, 3);	/* TX_FIFO_ARBITRATION */
+
+	div = dispc_lclk_rate() / dispc_pclk_rate();
+	r = FLD_MOD(r, div == 2 ? 0 : 1, 4, 4);	/* VP_CLK_RATIO */
+	r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */
+	r = FLD_MOD(r, 0, 8, 8);	/* VP_CLK_POL */
+	r = FLD_MOD(r, 2, 13, 12);	/* LINE_BUFFER, 2 lines */
+	r = FLD_MOD(r, 1, 14, 14);	/* TRIGGER_RESET_MODE */
+	r = FLD_MOD(r, 1, 19, 19);	/* EOT_ENABLE */
+	r = FLD_MOD(r, 1, 24, 24);	/* DCS_CMD_ENABLE */
+	r = FLD_MOD(r, 0, 25, 25);	/* DCS_CMD_CODE, 1=start, 0=continue */
+
+	dsi_write_reg(DSI_CTRL, r);
+
+	dsi_vc_initial_config(0);
+
+	/* set all vc targets to peripheral 0 */
+	dsi.vc[0].dest_per = 0;
+	dsi.vc[1].dest_per = 0;
+	dsi.vc[2].dest_per = 0;
+	dsi.vc[3].dest_per = 0;
+
+	return 0;
+}
+
+static void dsi_proto_timings(struct omap_dss_device *dssdev)
+{
+	unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail;
+	unsigned tclk_pre, tclk_post;
+	unsigned ths_prepare, ths_prepare_ths_zero, ths_zero;
+	unsigned ths_trail, ths_exit;
+	unsigned ddr_clk_pre, ddr_clk_post;
+	unsigned enter_hs_mode_lat, exit_hs_mode_lat;
+	unsigned ths_eot;
+	u32 r;
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG0);
+	ths_prepare = FLD_GET(r, 31, 24);
+	ths_prepare_ths_zero = FLD_GET(r, 23, 16);
+	ths_zero = ths_prepare_ths_zero - ths_prepare;
+	ths_trail = FLD_GET(r, 15, 8);
+	ths_exit = FLD_GET(r, 7, 0);
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG1);
+	tlpx = FLD_GET(r, 22, 16) * 2;
+	tclk_trail = FLD_GET(r, 15, 8);
+	tclk_zero = FLD_GET(r, 7, 0);
+
+	r = dsi_read_reg(DSI_DSIPHY_CFG2);
+	tclk_prepare = FLD_GET(r, 7, 0);
+
+	/* min 8*UI */
+	tclk_pre = 20;
+	/* min 60ns + 52*UI */
+	tclk_post = ns2ddr(60) + 26;
+
+	/* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */
+	if (dssdev->phy.dsi.data1_lane != 0 &&
+			dssdev->phy.dsi.data2_lane != 0)
+		ths_eot = 2;
+	else
+		ths_eot = 4;
+
+	ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare,
+			4);
+	ddr_clk_post = DIV_ROUND_UP(tclk_post + tclk_trail, 4) + ths_eot;
+
+	BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255);
+	BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255);
+
+	r = dsi_read_reg(DSI_CLK_TIMING);
+	r = FLD_MOD(r, ddr_clk_pre, 15, 8);
+	r = FLD_MOD(r, ddr_clk_post, 7, 0);
+	dsi_write_reg(DSI_CLK_TIMING, r);
+
+	DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n",
+			ddr_clk_pre,
+			ddr_clk_post);
+
+	enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) +
+		DIV_ROUND_UP(ths_prepare, 4) +
+		DIV_ROUND_UP(ths_zero + 3, 4);
+
+	exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot;
+
+	r = FLD_VAL(enter_hs_mode_lat, 31, 16) |
+		FLD_VAL(exit_hs_mode_lat, 15, 0);
+	dsi_write_reg(DSI_VM_TIMING7, r);
+
+	DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n",
+			enter_hs_mode_lat, exit_hs_mode_lat);
+}
+
+
+#define DSI_DECL_VARS \
+	int __dsi_cb = 0; u32 __dsi_cv = 0;
+
+#define DSI_FLUSH(ch) \
+	if (__dsi_cb > 0) { \
+		/*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \
+		dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \
+		__dsi_cb = __dsi_cv = 0; \
+	}
+
+#define DSI_PUSH(ch, data) \
+	do { \
+		__dsi_cv |= (data) << (__dsi_cb * 8); \
+		/*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \
+		if (++__dsi_cb > 3) \
+			DSI_FLUSH(ch); \
+	} while (0)
+
+static int dsi_update_screen_l4(struct omap_dss_device *dssdev,
+			int x, int y, int w, int h)
+{
+	/* Note: supports only 24bit colors in 32bit container */
+	int first = 1;
+	int fifo_stalls = 0;
+	int max_dsi_packet_size;
+	int max_data_per_packet;
+	int max_pixels_per_packet;
+	int pixels_left;
+	int bytespp = dssdev->ctrl.pixel_size / 8;
+	int scr_width;
+	u32 __iomem *data;
+	int start_offset;
+	int horiz_inc;
+	int current_x;
+	struct omap_overlay *ovl;
+
+	debug_irq = 0;
+
+	DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n",
+			x, y, w, h);
+
+	ovl = dssdev->manager->overlays[0];
+
+	if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U)
+		return -EINVAL;
+
+	if (dssdev->ctrl.pixel_size != 24)
+		return -EINVAL;
+
+	scr_width = ovl->info.screen_width;
+	data = ovl->info.vaddr;
+
+	start_offset = scr_width * y + x;
+	horiz_inc = scr_width - w;
+	current_x = x;
+
+	/* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes
+	 * in fifo */
+
+	/* When using CPU, max long packet size is TX buffer size */
+	max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4;
+
+	/* we seem to get better perf if we divide the tx fifo to half,
+	   and while the other half is being sent, we fill the other half
+	   max_dsi_packet_size /= 2; */
+
+	max_data_per_packet = max_dsi_packet_size - 4 - 1;
+
+	max_pixels_per_packet = max_data_per_packet / bytespp;
+
+	DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet);
+
+	pixels_left = w * h;
+
+	DSSDBG("total pixels %d\n", pixels_left);
+
+	data += start_offset;
+
+	while (pixels_left > 0) {
+		/* 0x2c = write_memory_start */
+		/* 0x3c = write_memory_continue */
+		u8 dcs_cmd = first ? 0x2c : 0x3c;
+		int pixels;
+		DSI_DECL_VARS;
+		first = 0;
+
+#if 1
+		/* using fifo not empty */
+		/* TX_FIFO_NOT_EMPTY */
+		while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) {
+			udelay(1);
+			fifo_stalls++;
+			if (fifo_stalls > 0xfffff) {
+				DSSERR("fifo stalls overflow, pixels left %d\n",
+						pixels_left);
+				dsi_if_enable(0);
+				return -EIO;
+			}
+		}
+#elif 1
+		/* using fifo emptiness */
+		while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 <
+				max_dsi_packet_size) {
+			fifo_stalls++;
+			if (fifo_stalls > 0xfffff) {
+				DSSERR("fifo stalls overflow, pixels left %d\n",
+					       pixels_left);
+				dsi_if_enable(0);
+				return -EIO;
+			}
+		}
+#else
+		while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) {
+			fifo_stalls++;
+			if (fifo_stalls > 0xfffff) {
+				DSSERR("fifo stalls overflow, pixels left %d\n",
+					       pixels_left);
+				dsi_if_enable(0);
+				return -EIO;
+			}
+		}
+#endif
+		pixels = min(max_pixels_per_packet, pixels_left);
+
+		pixels_left -= pixels;
+
+		dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE,
+				1 + pixels * bytespp, 0);
+
+		DSI_PUSH(0, dcs_cmd);
+
+		while (pixels-- > 0) {
+			u32 pix = __raw_readl(data++);
+
+			DSI_PUSH(0, (pix >> 16) & 0xff);
+			DSI_PUSH(0, (pix >> 8) & 0xff);
+			DSI_PUSH(0, (pix >> 0) & 0xff);
+
+			current_x++;
+			if (current_x == x+w) {
+				current_x = x;
+				data += horiz_inc;
+			}
+		}
+
+		DSI_FLUSH(0);
+	}
+
+	return 0;
+}
+
+static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int bytespp = dssdev->ctrl.pixel_size / 8;
+	int len;
+	int total_len;
+	int packet_payload;
+	int packet_len;
+	u32 l;
+	bool use_te_trigger;
+	const int channel = 0;
+
+	use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
+
+	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
+		DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
+				x, y, w, h);
+
+	len = w * h * bytespp;
+
+	/* XXX: one packet could be longer, I think? Line buffer is
+	 * 1024 x 24bits, but we have to put DCS cmd there also.
+	 * 1023 * 3 should work, but causes strange color effects. */
+	packet_payload = min(w, (u16)1020) * bytespp;
+
+	packet_len = packet_payload + 1;	/* 1 byte for DCS cmd */
+	total_len = (len / packet_payload) * packet_len;
+
+	if (len % packet_payload)
+		total_len += (len % packet_payload) + 1;
+
+	if (0)
+		dsi_vc_print_status(1);
+
+	l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
+	dsi_write_reg(DSI_VC_TE(channel), l);
+
+	dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0);
+
+	if (use_te_trigger)
+		l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
+	else
+		l = FLD_MOD(l, 1, 31, 31); /* TE_START */
+	dsi_write_reg(DSI_VC_TE(channel), l);
+
+	/* We put SIDLEMODE to no-idle for the duration of the transfer,
+	 * because DSS interrupts are not capable of waking up the CPU and the
+	 * framedone interrupt could be delayed for quite a long time. I think
+	 * the same goes for any DSS interrupts, but for some reason I have not
+	 * seen the problem anywhere else than here.
+	 */
+	dispc_disable_sidle();
+
+	dss_start_update(dssdev);
+
+	if (use_te_trigger) {
+		/* disable LP_RX_TO, so that we can receive TE.  Time to wait
+		 * for TE is longer than the timer allows */
+		REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
+
+		dsi_vc_send_bta(channel);
+	}
+}
+
+static void dsi_framedone_irq_callback(void *data, u32 mask)
+{
+	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+	 * turns itself off. However, DSI still has the pixels in its buffers,
+	 * and is sending the data.
+	 */
+
+	/* SIDLEMODE back to smart-idle */
+	dispc_enable_sidle();
+
+	dsi.framedone_received = true;
+	wake_up(&dsi.waitqueue);
+}
+
+static void dsi_set_update_region(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	spin_lock(&dsi.update_lock);
+	if (dsi.update_region.dirty) {
+		dsi.update_region.x = min(x, dsi.update_region.x);
+		dsi.update_region.y = min(y, dsi.update_region.y);
+		dsi.update_region.w = max(w, dsi.update_region.w);
+		dsi.update_region.h = max(h, dsi.update_region.h);
+	} else {
+		dsi.update_region.x = x;
+		dsi.update_region.y = y;
+		dsi.update_region.w = w;
+		dsi.update_region.h = h;
+	}
+
+	dsi.update_region.device = dssdev;
+	dsi.update_region.dirty = true;
+
+	spin_unlock(&dsi.update_lock);
+
+}
+
+static void dsi_start_auto_update(struct omap_dss_device *dssdev)
+{
+	u16 w, h;
+	int i;
+
+	DSSDBG("starting auto update\n");
+
+	/* In automatic mode the overlay settings are applied like on DPI/SDI.
+	 * Mark the overlays dirty, so that we get the overlays configured, as
+	 * manual mode has left them in bad shape after config partia planes */
+	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+		struct omap_overlay *ovl;
+		ovl = omap_dss_get_overlay(i);
+		if (ovl->manager == dssdev->manager)
+			ovl->info_dirty = true;
+	}
+	dssdev->manager->apply(dssdev->manager);
+
+	dssdev->get_resolution(dssdev, &w, &h);
+
+	dsi_set_update_region(dssdev, 0, 0, w, h);
+
+	dsi_perf_mark_start_auto();
+
+	wake_up(&dsi.waitqueue);
+}
+
+static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
+{
+	int r;
+	r = dssdev->driver->enable_te(dssdev, enable);
+	/* XXX for some reason, DSI TE breaks if we don't wait here.
+	 * Panel bug? Needs more studying */
+	msleep(100);
+	return r;
+}
+
+static void dsi_handle_framedone(void)
+{
+	int r;
+	const int channel = 0;
+	bool use_te_trigger;
+
+	use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
+
+	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
+		DSSDBG("FRAMEDONE\n");
+
+	if (use_te_trigger) {
+		/* enable LP_RX_TO again after the TE */
+		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
+	}
+
+	/* Send BTA after the frame. We need this for the TE to work, as TE
+	 * trigger is only sent for BTAs without preceding packet. Thus we need
+	 * to BTA after the pixel packets so that next BTA will cause TE
+	 * trigger.
+	 *
+	 * This is not needed when TE is not in use, but we do it anyway to
+	 * make sure that the transfer has been completed. It would be more
+	 * optimal, but more complex, to wait only just before starting next
+	 * transfer. */
+	r = dsi_vc_send_bta_sync(channel);
+	if (r)
+		DSSERR("BTA after framedone failed\n");
+
+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
+	dispc_fake_vsync_irq();
+#endif
+}
+
+static int dsi_update_thread(void *data)
+{
+	unsigned long timeout;
+	struct omap_dss_device *device;
+	u16 x, y, w, h;
+
+	while (1) {
+		bool sched;
+
+		wait_event_interruptible(dsi.waitqueue,
+				dsi.update_mode == OMAP_DSS_UPDATE_AUTO ||
+				(dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
+				 dsi.update_region.dirty == true) ||
+				kthread_should_stop());
+
+		if (kthread_should_stop())
+			break;
+
+		dsi_bus_lock();
+
+		if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED ||
+				kthread_should_stop()) {
+			dsi_bus_unlock();
+			break;
+		}
+
+		dsi_perf_mark_setup();
+
+		if (dsi.update_region.dirty) {
+			spin_lock(&dsi.update_lock);
+			dsi.active_update_region = dsi.update_region;
+			dsi.update_region.dirty = false;
+			spin_unlock(&dsi.update_lock);
+		}
+
+		device = dsi.active_update_region.device;
+		x = dsi.active_update_region.x;
+		y = dsi.active_update_region.y;
+		w = dsi.active_update_region.w;
+		h = dsi.active_update_region.h;
+
+		if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+
+			if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) {
+				dss_setup_partial_planes(device,
+						&x, &y, &w, &h);
+#if 1
+				/* XXX there seems to be a bug in this driver
+				 * or OMAP hardware.  Some updates with certain
+				 * widths and x coordinates fail. These widths
+				 * are always odd, so "fix" it here for now */
+				if (w & 1) {
+					u16 dw, dh;
+					device->get_resolution(device,
+							&dw, &dh);
+					if (x + w == dw)
+						x &= ~1;
+					++w;
+
+					dss_setup_partial_planes(device,
+							&x, &y, &w, &h);
+				}
+#endif
+			}
+
+			dispc_set_lcd_size(w, h);
+		}
+
+		if (dsi.active_update_region.dirty) {
+			dsi.active_update_region.dirty = false;
+			/* XXX TODO we don't need to send the coords, if they
+			 * are the same that are already programmed to the
+			 * panel. That should speed up manual update a bit */
+			device->driver->setup_update(device, x, y, w, h);
+		}
+
+		dsi_perf_mark_start();
+
+		if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+			dsi_vc_config_vp(0);
+
+			if (dsi.te_enabled && dsi.use_ext_te)
+				device->driver->wait_for_te(device);
+
+			dsi.framedone_received = false;
+
+			dsi_update_screen_dispc(device, x, y, w, h);
+
+			/* wait for framedone */
+			timeout = msecs_to_jiffies(1000);
+			timeout = wait_event_timeout(dsi.waitqueue,
+					dsi.framedone_received == true,
+					timeout);
+
+			if (timeout == 0) {
+				DSSERR("framedone timeout\n");
+				DSSERR("failed update %d,%d %dx%d\n",
+						x, y, w, h);
+
+				dispc_enable_sidle();
+				dispc_enable_lcd_out(0);
+			} else {
+				dsi_handle_framedone();
+				dsi_perf_show("DISPC");
+			}
+		} else {
+			dsi_update_screen_l4(device, x, y, w, h);
+			dsi_perf_show("L4");
+		}
+
+		sched = atomic_read(&dsi.bus_lock.count) < 0;
+
+		complete_all(&dsi.update_completion);
+
+		dsi_bus_unlock();
+
+		/* XXX We need to give others chance to get the bus lock. Is
+		 * there a better way for this? */
+		if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched)
+			schedule_timeout_interruptible(1);
+	}
+
+	DSSDBG("update thread exiting\n");
+
+	return 0;
+}
+
+
+
+/* Display funcs */
+
+static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+	if (r) {
+		DSSERR("can't get FRAMEDONE irq\n");
+		return r;
+	}
+
+	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
+
+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI);
+	dispc_enable_fifohandcheck(1);
+
+	dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
+
+	{
+		struct omap_video_timings timings = {
+			.hsw		= 1,
+			.hfp		= 1,
+			.hbp		= 1,
+			.vsw		= 1,
+			.vfp		= 0,
+			.vbp		= 0,
+		};
+
+		dispc_set_lcd_timings(&timings);
+	}
+
+	return 0;
+}
+
+static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
+{
+	omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+}
+
+static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
+{
+	struct dsi_clock_info cinfo;
+	int r;
+
+	_dsi_print_reset_status();
+
+	r = dsi_pll_init(1, 0);
+	if (r)
+		goto err0;
+
+	r = dsi_pll_calc_ddrfreq(dssdev->phy.dsi.ddr_clk_hz, &cinfo);
+	if (r)
+		goto err1;
+
+	r = dsi_pll_program(&cinfo);
+	if (r)
+		goto err1;
+
+	DSSDBG("PLL OK\n");
+
+	r = dsi_complexio_init(dssdev);
+	if (r)
+		goto err1;
+
+	_dsi_print_reset_status();
+
+	dsi_proto_timings(dssdev);
+	dsi_set_lp_clk_divisor(dssdev);
+
+	if (1)
+		_dsi_print_reset_status();
+
+	r = dsi_proto_config(dssdev);
+	if (r)
+		goto err2;
+
+	/* enable interface */
+	dsi_vc_enable(0, 1);
+	dsi_if_enable(1);
+	dsi_force_tx_stop_mode_io();
+
+	if (dssdev->driver->enable) {
+		r = dssdev->driver->enable(dssdev);
+		if (r)
+			goto err3;
+	}
+
+	/* enable high-speed after initial config */
+	dsi_vc_enable_hs(0, 1);
+
+	return 0;
+err3:
+	dsi_if_enable(0);
+err2:
+	dsi_complexio_uninit();
+err1:
+	dsi_pll_uninit();
+err0:
+	return r;
+}
+
+static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
+{
+	if (dssdev->driver->disable)
+		dssdev->driver->disable(dssdev);
+
+	dsi_complexio_uninit();
+	dsi_pll_uninit();
+}
+
+static int dsi_core_init(void)
+{
+	/* Autoidle */
+	REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0);
+
+	/* ENWAKEUP */
+	REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2);
+
+	/* SIDLEMODE smart-idle */
+	REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3);
+
+	_dsi_initialize_irq();
+
+	return 0;
+}
+
+static int dsi_display_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("dsi_display_enable\n");
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	r = omap_dss_start_device(dssdev);
+	if (r) {
+		DSSERR("failed to start device\n");
+		goto err0;
+	}
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		DSSERR("dssdev already enabled\n");
+		r = -EINVAL;
+		goto err1;
+	}
+
+	enable_clocks(1);
+	dsi_enable_pll_clock(1);
+
+	r = _dsi_reset();
+	if (r)
+		goto err2;
+
+	dsi_core_init();
+
+	r = dsi_display_init_dispc(dssdev);
+	if (r)
+		goto err2;
+
+	r = dsi_display_init_dsi(dssdev);
+	if (r)
+		goto err3;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	dsi.use_ext_te = dssdev->phy.dsi.ext_te;
+	r = dsi_set_te(dssdev, dsi.te_enabled);
+	if (r)
+		goto err3;
+
+	dsi.update_mode = dsi.user_update_mode;
+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
+		dsi_start_auto_update(dssdev);
+
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+
+	return 0;
+
+err3:
+	dsi_display_uninit_dispc(dssdev);
+err2:
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+err1:
+	omap_dss_stop_device(dssdev);
+err0:
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+	DSSDBG("dsi_display_enable FAILED\n");
+	return r;
+}
+
+static void dsi_display_disable(struct omap_dss_device *dssdev)
+{
+	DSSDBG("dsi_display_disable\n");
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
+			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+		goto end;
+
+	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	dsi_display_uninit_dispc(dssdev);
+
+	dsi_display_uninit_dsi(dssdev);
+
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+
+	omap_dss_stop_device(dssdev);
+end:
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+}
+
+static int dsi_display_suspend(struct omap_dss_device *dssdev)
+{
+	DSSDBG("dsi_display_suspend\n");
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
+			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+		goto end;
+
+	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+	dsi_display_uninit_dispc(dssdev);
+
+	dsi_display_uninit_dsi(dssdev);
+
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+end:
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+
+	return 0;
+}
+
+static int dsi_display_resume(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	DSSDBG("dsi_display_resume\n");
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+		DSSERR("dssdev not suspended\n");
+		r = -EINVAL;
+		goto err0;
+	}
+
+	enable_clocks(1);
+	dsi_enable_pll_clock(1);
+
+	r = _dsi_reset();
+	if (r)
+		goto err1;
+
+	dsi_core_init();
+
+	r = dsi_display_init_dispc(dssdev);
+	if (r)
+		goto err1;
+
+	r = dsi_display_init_dsi(dssdev);
+	if (r)
+		goto err2;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	r = dsi_set_te(dssdev, dsi.te_enabled);
+	if (r)
+		goto err2;
+
+	dsi.update_mode = dsi.user_update_mode;
+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
+		dsi_start_auto_update(dssdev);
+
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+
+	return 0;
+
+err2:
+	dsi_display_uninit_dispc(dssdev);
+err1:
+	enable_clocks(0);
+	dsi_enable_pll_clock(0);
+err0:
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+	DSSDBG("dsi_display_resume FAILED\n");
+	return r;
+}
+
+static int dsi_display_update(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h)
+{
+	int r = 0;
+	u16 dw, dh;
+
+	DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
+
+	mutex_lock(&dsi.lock);
+
+	if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
+		goto end;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		goto end;
+
+	dssdev->get_resolution(dssdev, &dw, &dh);
+
+	if  (x > dw || y > dh)
+		goto end;
+
+	if (x + w > dw)
+		w = dw - x;
+
+	if (y + h > dh)
+		h = dh - y;
+
+	if (w == 0 || h == 0)
+		goto end;
+
+	dsi_set_update_region(dssdev, x, y, w, h);
+
+	wake_up(&dsi.waitqueue);
+
+end:
+	mutex_unlock(&dsi.lock);
+
+	return r;
+}
+
+static int dsi_display_sync(struct omap_dss_device *dssdev)
+{
+	bool wait;
+
+	DSSDBG("dsi_display_sync()\n");
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
+			dsi.update_region.dirty) {
+		INIT_COMPLETION(dsi.update_completion);
+		wait = true;
+	} else {
+		wait = false;
+	}
+
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+
+	if (wait)
+		wait_for_completion_interruptible(&dsi.update_completion);
+
+	DSSDBG("dsi_display_sync() done\n");
+	return 0;
+}
+
+static int dsi_display_set_update_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_update_mode mode)
+{
+	DSSDBGF("%d", mode);
+
+	mutex_lock(&dsi.lock);
+	dsi_bus_lock();
+
+	if (dsi.update_mode != mode) {
+		dsi.user_update_mode = mode;
+		dsi.update_mode = mode;
+
+		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE &&
+				mode == OMAP_DSS_UPDATE_AUTO)
+			dsi_start_auto_update(dssdev);
+	}
+
+	dsi_bus_unlock();
+	mutex_unlock(&dsi.lock);
+
+	return 0;
+}
+
+static enum omap_dss_update_mode dsi_display_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	return dsi.update_mode;
+}
+
+
+static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	int r = 0;
+
+	DSSDBGF("%d", enable);
+
+	if (!dssdev->driver->enable_te)
+		return -ENOENT;
+
+	dsi_bus_lock();
+
+	dsi.te_enabled = enable;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		goto end;
+
+	r = dsi_set_te(dssdev, enable);
+end:
+	dsi_bus_unlock();
+
+	return r;
+}
+
+static int dsi_display_get_te(struct omap_dss_device *dssdev)
+{
+	return dsi.te_enabled;
+}
+
+static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate)
+{
+
+	DSSDBGF("%d", rotate);
+
+	if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
+		return -EINVAL;
+
+	dsi_bus_lock();
+	dssdev->driver->set_rotate(dssdev, rotate);
+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
+		u16 w, h;
+		/* the display dimensions may have changed, so set a new
+		 * update region */
+		dssdev->get_resolution(dssdev, &w, &h);
+		dsi_set_update_region(dssdev, 0, 0, w, h);
+	}
+	dsi_bus_unlock();
+
+	return 0;
+}
+
+static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev)
+{
+	if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
+		return 0;
+
+	return dssdev->driver->get_rotate(dssdev);
+}
+
+static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror)
+{
+	DSSDBGF("%d", mirror);
+
+	if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
+		return -EINVAL;
+
+	dsi_bus_lock();
+	dssdev->driver->set_mirror(dssdev, mirror);
+	dsi_bus_unlock();
+
+	return 0;
+}
+
+static bool dsi_display_get_mirror(struct omap_dss_device *dssdev)
+{
+	if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
+		return 0;
+
+	return dssdev->driver->get_mirror(dssdev);
+}
+
+static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num)
+{
+	int r;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return -EIO;
+
+	DSSDBGF("%d", test_num);
+
+	dsi_bus_lock();
+
+	/* run test first in low speed mode */
+	dsi_vc_enable_hs(0, 0);
+
+	if (dssdev->driver->run_test) {
+		r = dssdev->driver->run_test(dssdev, test_num);
+		if (r)
+			goto end;
+	}
+
+	/* then in high speed */
+	dsi_vc_enable_hs(0, 1);
+
+	if (dssdev->driver->run_test) {
+		r = dssdev->driver->run_test(dssdev, test_num);
+		if (r)
+			goto end;
+	}
+
+end:
+	dsi_vc_enable_hs(0, 1);
+
+	dsi_bus_unlock();
+
+	return r;
+}
+
+static int dsi_display_memory_read(struct omap_dss_device *dssdev,
+		void *buf, size_t size,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+
+	DSSDBGF("");
+
+	if (!dssdev->driver->memory_read)
+		return -EINVAL;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return -EIO;
+
+	dsi_bus_lock();
+
+	r = dssdev->driver->memory_read(dssdev, buf, size,
+			x, y, w, h);
+
+	dsi_bus_unlock();
+
+	return r;
+}
+
+void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
+		u32 fifo_size, enum omap_burst_size *burst_size,
+		u32 *fifo_low, u32 *fifo_high)
+{
+	unsigned burst_size_bytes;
+
+	*burst_size = OMAP_DSS_BURST_16x32;
+	burst_size_bytes = 16 * 32 / 8;
+
+	*fifo_high = fifo_size - burst_size_bytes;
+	*fifo_low = 0;
+}
+
+int dsi_init_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("DSI init\n");
+
+	dssdev->enable = dsi_display_enable;
+	dssdev->disable = dsi_display_disable;
+	dssdev->suspend = dsi_display_suspend;
+	dssdev->resume = dsi_display_resume;
+	dssdev->update = dsi_display_update;
+	dssdev->sync = dsi_display_sync;
+	dssdev->set_update_mode = dsi_display_set_update_mode;
+	dssdev->get_update_mode = dsi_display_get_update_mode;
+	dssdev->enable_te = dsi_display_enable_te;
+	dssdev->get_te = dsi_display_get_te;
+
+	dssdev->get_rotate = dsi_display_get_rotate;
+	dssdev->set_rotate = dsi_display_set_rotate;
+
+	dssdev->get_mirror = dsi_display_get_mirror;
+	dssdev->set_mirror = dsi_display_set_mirror;
+
+	dssdev->run_test = dsi_display_run_test;
+	dssdev->memory_read = dsi_display_memory_read;
+
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+
+	dsi.vc[0].dssdev = dssdev;
+	dsi.vc[1].dssdev = dssdev;
+
+	return 0;
+}
+
+int dsi_init(struct platform_device *pdev)
+{
+	u32 rev;
+	struct sched_param param = {
+		.sched_priority = MAX_USER_RT_PRIO-1
+	};
+
+	spin_lock_init(&dsi.errors_lock);
+	dsi.errors = 0;
+
+	/* XXX fail properly */
+
+	init_completion(&dsi.bta_completion);
+	init_completion(&dsi.update_completion);
+
+	dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi");
+	if (IS_ERR(dsi.thread)) {
+		DSSERR("cannot create kthread\n");
+		return PTR_ERR(dsi.thread);
+	}
+	sched_setscheduler(dsi.thread, SCHED_FIFO, &param);
+
+	init_waitqueue_head(&dsi.waitqueue);
+	spin_lock_init(&dsi.update_lock);
+
+	mutex_init(&dsi.lock);
+	mutex_init(&dsi.bus_lock);
+
+	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
+	dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED;
+
+	dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
+	if (!dsi.base) {
+		DSSERR("can't ioremap DSI\n");
+		return -ENOMEM;
+	}
+
+	dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi");
+	if (IS_ERR(dsi.vdds_dsi_reg)) {
+		iounmap(dsi.base);
+		DSSERR("can't get VDDS_DSI regulator\n");
+		return PTR_ERR(dsi.vdds_dsi_reg);
+	}
+
+	enable_clocks(1);
+
+	rev = dsi_read_reg(DSI_REVISION);
+	printk(KERN_INFO "OMAP DSI rev %d.%d\n",
+	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	enable_clocks(0);
+
+	wake_up_process(dsi.thread);
+
+	return 0;
+}
+
+void dsi_exit(void)
+{
+	kthread_stop(dsi.thread);
+
+	regulator_put(dsi.vdds_dsi_reg);
+
+	iounmap(dsi.base);
+
+	DSSDBG("omap_dsi_exit\n");
+}
+
--- /dev/null
+++ b/drivers/video/omap2/dss/dss.c
@@ -0,0 +1,347 @@
+/*
+ * linux/drivers/video/omap2/dss/dss.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "DSS"
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+
+#include <mach/display.h>
+#include "dss.h"
+
+#define DSS_BASE			0x48050000
+
+#define DSS_SZ_REGS			SZ_512
+
+struct dss_reg {
+	u16 idx;
+};
+
+#define DSS_REG(idx)			((const struct dss_reg) { idx })
+
+#define DSS_REVISION			DSS_REG(0x0000)
+#define DSS_SYSCONFIG			DSS_REG(0x0010)
+#define DSS_SYSSTATUS			DSS_REG(0x0014)
+#define DSS_IRQSTATUS			DSS_REG(0x0018)
+#define DSS_CONTROL			DSS_REG(0x0040)
+#define DSS_SDI_CONTROL			DSS_REG(0x0044)
+#define DSS_PLL_CONTROL			DSS_REG(0x0048)
+#define DSS_SDI_STATUS			DSS_REG(0x005C)
+
+#define REG_GET(idx, start, end) \
+	FLD_GET(dss_read_reg(idx), start, end)
+
+#define REG_FLD_MOD(idx, val, start, end) \
+	dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end))
+
+static struct {
+	void __iomem    *base;
+
+	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
+} dss;
+
+static int _omap_dss_wait_reset(void);
+
+static inline void dss_write_reg(const struct dss_reg idx, u32 val)
+{
+	__raw_writel(val, dss.base + idx.idx);
+}
+
+static inline u32 dss_read_reg(const struct dss_reg idx)
+{
+	return __raw_readl(dss.base + idx.idx);
+}
+
+#define SR(reg) \
+	dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg)
+#define RR(reg) \
+	dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)])
+
+void dss_save_context(void)
+{
+	if (cpu_is_omap24xx())
+		return;
+
+	SR(SYSCONFIG);
+	SR(CONTROL);
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+	SR(SDI_CONTROL);
+	SR(PLL_CONTROL);
+#endif
+}
+
+void dss_restore_context(void)
+{
+	if (_omap_dss_wait_reset())
+		DSSERR("DSS not coming out of reset after sleep\n");
+
+	RR(SYSCONFIG);
+	RR(CONTROL);
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+	RR(SDI_CONTROL);
+	RR(PLL_CONTROL);
+#endif
+}
+
+#undef SR
+#undef RR
+
+void dss_sdi_init(u8 datapairs)
+{
+	u32 l;
+
+	BUG_ON(datapairs > 3 || datapairs < 1);
+
+	l = dss_read_reg(DSS_SDI_CONTROL);
+	l = FLD_MOD(l, 0xf, 19, 15);		/* SDI_PDIV */
+	l = FLD_MOD(l, datapairs-1, 3, 2);	/* SDI_PRSEL */
+	l = FLD_MOD(l, 2, 1, 0);		/* SDI_BWSEL */
+	dss_write_reg(DSS_SDI_CONTROL, l);
+
+	l = dss_read_reg(DSS_PLL_CONTROL);
+	l = FLD_MOD(l, 0x7, 25, 22);	/* SDI_PLL_FREQSEL */
+	l = FLD_MOD(l, 0xb, 16, 11);	/* SDI_PLL_REGN */
+	l = FLD_MOD(l, 0xb4, 10, 1);	/* SDI_PLL_REGM */
+	dss_write_reg(DSS_PLL_CONTROL, l);
+}
+
+void dss_sdi_enable(void)
+{
+	dispc_pck_free_enable(1);
+
+	/* Reset SDI PLL */
+	REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */
+	udelay(1);	/* wait 2x PCLK */
+
+	/* Lock SDI PLL */
+	REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */
+
+	/* Waiting for PLL lock request to complete */
+	while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6))
+		;
+
+	/* Clearing PLL_GO bit */
+	REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28);
+
+	/* Waiting for PLL to lock */
+	while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5)))
+		;
+
+	dispc_lcd_enable_signal(1);
+
+	/* Waiting for SDI reset to complete */
+	while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2)))
+		;
+}
+
+void dss_sdi_disable(void)
+{
+	dispc_lcd_enable_signal(0);
+
+	dispc_pck_free_enable(0);
+
+	/* Reset SDI PLL */
+	REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */
+}
+
+void dss_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r))
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	DUMPREG(DSS_REVISION);
+	DUMPREG(DSS_SYSCONFIG);
+	DUMPREG(DSS_SYSSTATUS);
+	DUMPREG(DSS_IRQSTATUS);
+	DUMPREG(DSS_CONTROL);
+	DUMPREG(DSS_SDI_CONTROL);
+	DUMPREG(DSS_PLL_CONTROL);
+	DUMPREG(DSS_SDI_STATUS);
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+void dss_select_clk_source(bool dsi, bool dispc)
+{
+	u32 r;
+	r = dss_read_reg(DSS_CONTROL);
+	r = FLD_MOD(r, dsi, 1, 1);	/* DSI_CLK_SWITCH */
+	r = FLD_MOD(r, dispc, 0, 0);	/* DISPC_CLK_SWITCH */
+	dss_write_reg(DSS_CONTROL, r);
+}
+
+int dss_get_dsi_clk_source(void)
+{
+	return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1);
+}
+
+int dss_get_dispc_clk_source(void)
+{
+	return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0);
+}
+
+static irqreturn_t dss_irq_handler_omap2(int irq, void *arg)
+{
+	dispc_irq_handler();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dss_irq_handler_omap3(int irq, void *arg)
+{
+	u32 irqstatus;
+
+	irqstatus = dss_read_reg(DSS_IRQSTATUS);
+
+	if (irqstatus & (1<<0))	/* DISPC_IRQ */
+		dispc_irq_handler();
+#ifdef CONFIG_OMAP2_DSS_DSI
+	if (irqstatus & (1<<1))	/* DSI_IRQ */
+		dsi_irq_handler();
+#endif
+
+	return IRQ_HANDLED;
+}
+
+static int _omap_dss_wait_reset(void)
+{
+	unsigned timeout = 1000;
+
+	while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) {
+		udelay(1);
+		if (!--timeout) {
+			DSSERR("soft reset failed\n");
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static int _omap_dss_reset(void)
+{
+	/* Soft reset */
+	REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1);
+	return _omap_dss_wait_reset();
+}
+
+void dss_set_venc_output(enum omap_dss_venc_type type)
+{
+	int l = 0;
+
+	if (type == OMAP_DSS_VENC_TYPE_COMPOSITE)
+		l = 0;
+	else if (type == OMAP_DSS_VENC_TYPE_SVIDEO)
+		l = 1;
+	else
+		BUG();
+
+	/* venc out selection. 0 = comp, 1 = svideo */
+	REG_FLD_MOD(DSS_CONTROL, l, 6, 6);
+}
+
+void dss_set_dac_pwrdn_bgz(bool enable)
+{
+	REG_FLD_MOD(DSS_CONTROL, enable, 5, 5);	/* DAC Power-Down Control */
+}
+
+int dss_init(bool skip_init)
+{
+	int r;
+	u32 rev;
+
+	dss.base = ioremap(DSS_BASE, DSS_SZ_REGS);
+	if (!dss.base) {
+		DSSERR("can't ioremap DSS\n");
+		r = -ENOMEM;
+		goto fail0;
+	}
+
+	if (!skip_init) {
+		/* disable LCD and DIGIT output. This seems to fix the synclost
+		 * problem that we get, if the bootloader starts the DSS and
+		 * the kernel resets it */
+		omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
+
+		/* We need to wait here a bit, otherwise we sometimes start to
+		 * get synclost errors, and after that only power cycle will
+		 * restore DSS functionality. I have no idea why this happens.
+		 * And we have to wait _before_ resetting the DSS, but after
+		 * enabling clocks.
+		 */
+		msleep(50);
+
+		_omap_dss_reset();
+	}
+
+	/* autoidle */
+	REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
+
+	/* Select DPLL */
+	REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+	REG_FLD_MOD(DSS_CONTROL, 1, 4, 4);	/* venc dac demen */
+	REG_FLD_MOD(DSS_CONTROL, 1, 3, 3);	/* venc clock 4x enable */
+	REG_FLD_MOD(DSS_CONTROL, 0, 2, 2);	/* venc clock mode = normal */
+#endif
+
+	r = request_irq(INT_24XX_DSS_IRQ,
+			cpu_is_omap24xx()
+			? dss_irq_handler_omap2
+			: dss_irq_handler_omap3,
+			0, "OMAP DSS", NULL);
+
+	if (r < 0) {
+		DSSERR("omap2 dss: request_irq failed\n");
+		goto fail1;
+	}
+
+	dss_save_context();
+
+	rev = dss_read_reg(DSS_REVISION);
+	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
+			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	return 0;
+
+fail1:
+	iounmap(dss.base);
+fail0:
+	return r;
+}
+
+void dss_exit(void)
+{
+	free_irq(INT_24XX_DSS_IRQ, NULL);
+
+	iounmap(dss.base);
+}
+
--- /dev/null
+++ b/drivers/video/omap2/dss/dss.h
@@ -0,0 +1,356 @@
+/*
+ * linux/drivers/video/omap2/dss/dss.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP2_DSS_H
+#define __OMAP2_DSS_H
+
+#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT
+#define DEBUG
+#endif
+
+#ifdef DEBUG
+extern unsigned int dss_debug;
+#ifdef DSS_SUBSYS_NAME
+#define DSSDBG(format, ...) \
+	if (dss_debug) \
+		printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \
+		## __VA_ARGS__)
+#else
+#define DSSDBG(format, ...) \
+	if (dss_debug) \
+		printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__)
+#endif
+
+#ifdef DSS_SUBSYS_NAME
+#define DSSDBGF(format, ...) \
+	if (dss_debug) \
+		printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \
+				": %s(" format ")\n", \
+				__func__, \
+				## __VA_ARGS__)
+#else
+#define DSSDBGF(format, ...) \
+	if (dss_debug) \
+		printk(KERN_DEBUG "omapdss: " \
+				": %s(" format ")\n", \
+				__func__, \
+				## __VA_ARGS__)
+#endif
+
+#else /* DEBUG */
+#define DSSDBG(format, ...)
+#define DSSDBGF(format, ...)
+#endif
+
+
+#ifdef DSS_SUBSYS_NAME
+#define DSSERR(format, ...) \
+	printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \
+	## __VA_ARGS__)
+#else
+#define DSSERR(format, ...) \
+	printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__)
+#endif
+
+#ifdef DSS_SUBSYS_NAME
+#define DSSINFO(format, ...) \
+	printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \
+	## __VA_ARGS__)
+#else
+#define DSSINFO(format, ...) \
+	printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__)
+#endif
+
+#ifdef DSS_SUBSYS_NAME
+#define DSSWARN(format, ...) \
+	printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \
+	## __VA_ARGS__)
+#else
+#define DSSWARN(format, ...) \
+	printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__)
+#endif
+
+/* OMAP TRM gives bitfields as start:end, where start is the higher bit
+   number. For example 7:0 */
+#define FLD_MASK(start, end)	(((1 << (start - end + 1)) - 1) << (end))
+#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end))
+#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end))
+#define FLD_MOD(orig, val, start, end) \
+	(((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end))
+
+#define DISPC_MAX_FCK 173000000
+
+enum omap_burst_size {
+	OMAP_DSS_BURST_4x32 = 0,
+	OMAP_DSS_BURST_8x32 = 1,
+	OMAP_DSS_BURST_16x32 = 2,
+};
+
+enum omap_parallel_interface_mode {
+	OMAP_DSS_PARALLELMODE_BYPASS,		/* MIPI DPI */
+	OMAP_DSS_PARALLELMODE_RFBI,		/* MIPI DBI */
+	OMAP_DSS_PARALLELMODE_DSI,
+};
+
+enum dss_clock {
+	DSS_CLK_ICK	= 1 << 0,
+	DSS_CLK_FCK1	= 1 << 1,
+	DSS_CLK_FCK2	= 1 << 2,
+	DSS_CLK_54M	= 1 << 3,
+	DSS_CLK_96M	= 1 << 4,
+};
+
+struct dispc_clock_info {
+	/* rates that we get with dividers below */
+	unsigned long fck;
+	unsigned long lck;
+	unsigned long pck;
+
+	/* dividers */
+	u16 fck_div;
+	u16 lck_div;
+	u16 pck_div;
+};
+
+struct dsi_clock_info {
+	/* rates that we get with dividers below */
+	unsigned long fint;
+	unsigned long dsiphy;
+	unsigned long clkin;
+	unsigned long dsi1_pll_fclk;
+	unsigned long dsi2_pll_fclk;
+	unsigned long lck;
+	unsigned long pck;
+
+	/* dividers */
+	u16 regn;
+	u16 regm;
+	u16 regm3;
+	u16 regm4;
+
+	u16 lck_div;
+	u16 pck_div;
+
+	u8 highfreq;
+	bool use_dss2_fck;
+};
+
+struct seq_file;
+struct platform_device;
+
+/* core */
+void dss_clk_enable(enum dss_clock clks);
+void dss_clk_disable(enum dss_clock clks);
+unsigned long dss_clk_get_rate(enum dss_clock clk);
+int dss_need_ctx_restore(void);
+void dss_dump_clocks(struct seq_file *s);
+struct bus_type *dss_get_bus(void);
+
+/* display */
+int dss_suspend_all_devices(void);
+int dss_resume_all_devices(void);
+
+void dss_init_device(struct platform_device *pdev,
+		struct omap_dss_device *dssdev);
+void dss_uninit_device(struct platform_device *pdev,
+		struct omap_dss_device *dssdev);
+bool dss_use_replication(struct omap_dss_device *dssdev,
+		enum omap_color_mode mode);
+void default_get_overlay_fifo_thresholds(enum omap_plane plane,
+		u32 fifo_size, enum omap_burst_size *burst_size,
+		u32 *fifo_low, u32 *fifo_high);
+
+/* manager */
+int dss_init_overlay_managers(struct platform_device *pdev);
+void dss_uninit_overlay_managers(struct platform_device *pdev);
+int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
+void dss_setup_partial_planes(struct omap_dss_device *dssdev,
+				u16 *x, u16 *y, u16 *w, u16 *h);
+void dss_start_update(struct omap_dss_device *dssdev);
+
+/* overlay */
+void dss_init_overlays(struct platform_device *pdev);
+void dss_uninit_overlays(struct platform_device *pdev);
+int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev);
+void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr);
+#ifdef L4_EXAMPLE
+void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr);
+#endif
+void dss_recheck_connections(struct omap_dss_device *dssdev, bool force);
+
+/* DSS */
+int dss_init(bool skip_init);
+void dss_exit(void);
+
+void dss_save_context(void);
+void dss_restore_context(void);
+
+void dss_dump_regs(struct seq_file *s);
+
+void dss_sdi_init(u8 datapairs);
+void dss_sdi_enable(void);
+void dss_sdi_disable(void);
+
+void dss_select_clk_source(bool dsi, bool dispc);
+int dss_get_dsi_clk_source(void);
+int dss_get_dispc_clk_source(void);
+void dss_set_venc_output(enum omap_dss_venc_type type);
+void dss_set_dac_pwrdn_bgz(bool enable);
+
+/* SDI */
+int sdi_init(bool skip_init);
+void sdi_exit(void);
+int sdi_init_display(struct omap_dss_device *display);
+
+/* DSI */
+int dsi_init(struct platform_device *pdev);
+void dsi_exit(void);
+
+void dsi_dump_clocks(struct seq_file *s);
+void dsi_dump_regs(struct seq_file *s);
+
+void dsi_save_context(void);
+void dsi_restore_context(void);
+
+int dsi_init_display(struct omap_dss_device *display);
+void dsi_irq_handler(void);
+unsigned long dsi_get_dsi1_pll_rate(void);
+unsigned long dsi_get_dsi2_pll_rate(void);
+int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
+		struct dsi_clock_info *cinfo);
+int dsi_pll_program(struct dsi_clock_info *cinfo);
+int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv);
+void dsi_pll_uninit(void);
+void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
+		u32 fifo_size, enum omap_burst_size *burst_size,
+		u32 *fifo_low, u32 *fifo_high);
+
+/* DPI */
+int dpi_init(void);
+void dpi_exit(void);
+int dpi_init_display(struct omap_dss_device *dssdev);
+
+/* DISPC */
+int dispc_init(void);
+void dispc_exit(void);
+void dispc_dump_clocks(struct seq_file *s);
+void dispc_dump_regs(struct seq_file *s);
+void dispc_irq_handler(void);
+void dispc_fake_vsync_irq(void);
+
+void dispc_save_context(void);
+void dispc_restore_context(void);
+
+void dispc_enable_sidle(void);
+void dispc_disable_sidle(void);
+
+void dispc_lcd_enable_signal_polarity(bool act_high);
+void dispc_lcd_enable_signal(bool enable);
+void dispc_pck_free_enable(bool enable);
+void dispc_enable_fifohandcheck(bool enable);
+
+void dispc_set_lcd_size(u16 width, u16 height);
+void dispc_set_digit_size(u16 width, u16 height);
+u32 dispc_get_plane_fifo_size(enum omap_plane plane);
+void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high);
+void dispc_enable_fifomerge(bool enable);
+void dispc_set_burst_size(enum omap_plane plane,
+		enum omap_burst_size burst_size);
+
+void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr);
+void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr);
+void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y);
+void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height);
+void dispc_set_channel_out(enum omap_plane plane,
+		enum omap_channel channel_out);
+
+int dispc_setup_plane(enum omap_plane plane,
+		      u32 paddr, u16 screen_width,
+		      u16 pos_x, u16 pos_y,
+		      u16 width, u16 height,
+		      u16 out_width, u16 out_height,
+		      enum omap_color_mode color_mode,
+		      bool ilace,
+		      enum omap_dss_rotation_type rotation_type,
+		      u8 rotation, bool mirror,
+		      u8 global_alpha);
+
+bool dispc_go_busy(enum omap_channel channel);
+void dispc_go(enum omap_channel channel);
+void dispc_enable_lcd_out(bool enable);
+void dispc_enable_digit_out(bool enable);
+int dispc_enable_plane(enum omap_plane plane, bool enable);
+void dispc_enable_replication(enum omap_plane plane, bool enable);
+
+void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode);
+void dispc_set_tft_data_lines(u8 data_lines);
+void dispc_set_lcd_display_type(enum omap_lcd_display_type type);
+void dispc_set_loadmode(enum omap_dss_load_mode mode);
+
+void dispc_set_default_color(enum omap_channel channel, u32 color);
+u32 dispc_get_default_color(enum omap_channel channel);
+void dispc_set_trans_key(enum omap_channel ch,
+		enum omap_dss_trans_key_type type,
+		u32 trans_key);
+void dispc_get_trans_key(enum omap_channel ch,
+		enum omap_dss_trans_key_type *type,
+		u32 *trans_key);
+void dispc_enable_trans_key(enum omap_channel ch, bool enable);
+void dispc_enable_alpha_blending(enum omap_channel ch, bool enable);
+bool dispc_trans_key_enabled(enum omap_channel ch);
+bool dispc_alpha_blending_enabled(enum omap_channel ch);
+
+bool dispc_lcd_timings_ok(struct omap_video_timings *timings);
+void dispc_set_lcd_timings(struct omap_video_timings *timings);
+unsigned long dispc_fclk_rate(void);
+unsigned long dispc_lclk_rate(void);
+unsigned long dispc_pclk_rate(void);
+void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb);
+void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
+		u16 *lck_div, u16 *pck_div);
+int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
+		struct dispc_clock_info *cinfo);
+int dispc_set_clock_div(struct dispc_clock_info *cinfo);
+int dispc_get_clock_div(struct dispc_clock_info *cinfo);
+void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div);
+
+
+/* VENC */
+int venc_init(struct platform_device *pdev);
+void venc_exit(void);
+void venc_dump_regs(struct seq_file *s);
+int venc_init_display(struct omap_dss_device *display);
+
+/* RFBI */
+int rfbi_init(void);
+void rfbi_exit(void);
+void rfbi_dump_regs(struct seq_file *s);
+
+int rfbi_configure(int rfbi_module, int bpp, int lines);
+void rfbi_enable_rfbi(bool enable);
+void rfbi_transfer_area(u16 width, u16 height,
+			     void (callback)(void *data), void *data);
+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
+unsigned long rfbi_get_max_tx_rate(void);
+int rfbi_init_display(struct omap_dss_device *display);
+
+#endif
--- /dev/null
+++ b/drivers/video/omap2/dss/manager.c
@@ -0,0 +1,1487 @@
+/*
+ * linux/drivers/video/omap2/dss/manager.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "MANAGER"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+
+#include <mach/display.h>
+#include <mach/cpu.h>
+
+#include "dss.h"
+
+static int num_managers;
+static struct list_head manager_list;
+
+static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
+}
+
+static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			mgr->device ? mgr->device->name : "<none>");
+}
+
+static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	int r = 0;
+	size_t len = size;
+	struct omap_dss_device *dssdev = NULL;
+
+	int match(struct omap_dss_device *dssdev, void *data)
+	{
+		const char *str = data;
+		return sysfs_streq(dssdev->name, str);
+	}
+
+	if (buf[size-1] == '\n')
+		--len;
+
+	if (len > 0)
+		dssdev = omap_dss_find_device((void *)buf, match);
+
+	if (len > 0 && dssdev == NULL)
+		return -EINVAL;
+
+	if (dssdev)
+		DSSDBG("display %s found\n", dssdev->name);
+
+	if (mgr->device) {
+		r = mgr->unset_device(mgr);
+		if (r) {
+			DSSERR("failed to unset display\n");
+			goto put_device;
+		}
+	}
+
+	if (dssdev) {
+		r = mgr->set_device(mgr, dssdev);
+		if (r) {
+			DSSERR("failed to set manager\n");
+			goto put_device;
+		}
+
+		r = mgr->apply(mgr);
+		if (r) {
+			DSSERR("failed to apply dispc config\n");
+			goto put_device;
+		}
+	}
+
+put_device:
+	if (dssdev)
+		omap_dss_put_device(dssdev);
+
+	return r ? r : size;
+}
+
+static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
+					  char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color);
+}
+
+static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
+					   const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	u32 color;
+	int r;
+
+	if (sscanf(buf, "%d", &color) != 1)
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.default_color = color;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static const char *trans_key_type_str[] = {
+	"gfx-destination",
+	"video-source",
+};
+
+static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
+					   char *buf)
+{
+	enum omap_dss_trans_key_type key_type;
+
+	key_type = mgr->info.trans_key_type;
+	BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
+}
+
+static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
+					    const char *buf, size_t size)
+{
+	enum omap_dss_trans_key_type key_type;
+	struct omap_overlay_manager_info info;
+	int r;
+
+	for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+			key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
+		if (sysfs_streq(buf, trans_key_type_str[key_type]))
+			break;
+	}
+
+	if (key_type == ARRAY_SIZE(trans_key_type_str))
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_key_type = key_type;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
+					    char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key);
+}
+
+static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
+					     const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	u32 key_value;
+	int r;
+
+	if (sscanf(buf, "%d", &key_value) != 1)
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_key = key_value;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
+					      char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_enabled);
+}
+
+static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
+					       const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	int enable;
+	int r;
+
+	if (sscanf(buf, "%d", &enable) != 1)
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_enabled = enable ? true : false;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_alpha_blending_enabled_show(
+		struct omap_overlay_manager *mgr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled);
+}
+
+static ssize_t manager_alpha_blending_enabled_store(
+		struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	int enable;
+	int r;
+
+	if (sscanf(buf, "%d", &enable) != 1)
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.alpha_enabled = enable ? true : false;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+struct manager_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct omap_overlay_manager *, char *);
+	ssize_t	(*store)(struct omap_overlay_manager *, const char *, size_t);
+};
+
+#define MANAGER_ATTR(_name, _mode, _show, _store) \
+	struct manager_attribute manager_attr_##_name = \
+	__ATTR(_name, _mode, _show, _store)
+
+static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
+static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
+		manager_display_show, manager_display_store);
+static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
+		manager_default_color_show, manager_default_color_store);
+static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
+		manager_trans_key_type_show, manager_trans_key_type_store);
+static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
+		manager_trans_key_value_show, manager_trans_key_value_store);
+static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
+		manager_trans_key_enabled_show,
+		manager_trans_key_enabled_store);
+static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
+		manager_alpha_blending_enabled_show,
+		manager_alpha_blending_enabled_store);
+
+
+static struct attribute *manager_sysfs_attrs[] = {
+	&manager_attr_name.attr,
+	&manager_attr_display.attr,
+	&manager_attr_default_color.attr,
+	&manager_attr_trans_key_type.attr,
+	&manager_attr_trans_key_value.attr,
+	&manager_attr_trans_key_enabled.attr,
+	&manager_attr_alpha_blending_enabled.attr,
+	NULL
+};
+
+static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
+		char *buf)
+{
+	struct omap_overlay_manager *manager;
+	struct manager_attribute *manager_attr;
+
+	manager = container_of(kobj, struct omap_overlay_manager, kobj);
+	manager_attr = container_of(attr, struct manager_attribute, attr);
+
+	if (!manager_attr->show)
+		return -ENOENT;
+
+	return manager_attr->show(manager, buf);
+}
+
+static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager *manager;
+	struct manager_attribute *manager_attr;
+
+	manager = container_of(kobj, struct omap_overlay_manager, kobj);
+	manager_attr = container_of(attr, struct manager_attribute, attr);
+
+	if (!manager_attr->store)
+		return -ENOENT;
+
+	return manager_attr->store(manager, buf, size);
+}
+
+static struct sysfs_ops manager_sysfs_ops = {
+	.show = manager_attr_show,
+	.store = manager_attr_store,
+};
+
+static struct kobj_type manager_ktype = {
+	.sysfs_ops = &manager_sysfs_ops,
+	.default_attrs = manager_sysfs_attrs,
+};
+
+/*
+ * We have 4 levels of cache for the dispc settings. First two are in SW and
+ * the latter two in HW.
+ *
+ * +--------------------+
+ * |overlay/manager_info|
+ * +--------------------+
+ *          v
+ *        apply()
+ *          v
+ * +--------------------+
+ * |     dss_cache      |
+ * +--------------------+
+ *          v
+ *      configure()
+ *          v
+ * +--------------------+
+ * |  shadow registers  |
+ * +--------------------+
+ *          v
+ * VFP or lcd/digit_enable
+ *          v
+ * +--------------------+
+ * |      registers     |
+ * +--------------------+
+ */
+
+struct overlay_cache_data {
+	/* If true, cache changed, but not written to shadow registers. Set
+	 * in apply(), cleared when registers written. */
+	bool dirty;
+	/* If true, shadow registers contain changed values not yet in real
+	 * registers. Set when writing to shadow registers, cleared at
+	 * VSYNC/EVSYNC */
+	bool shadow_dirty;
+
+	bool enabled;
+
+	u32 paddr;
+	void __iomem *vaddr;
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+
+	enum omap_channel channel;
+	bool replication;
+	bool ilace;
+
+	enum omap_burst_size burst_size;
+	u32 fifo_low;
+	u32 fifo_high;
+
+	bool manual_update;
+};
+
+struct manager_cache_data {
+	/* If true, cache changed, but not written to shadow registers. Set
+	 * in apply(), cleared when registers written. */
+	bool dirty;
+	/* If true, shadow registers contain changed values not yet in real
+	 * registers. Set when writing to shadow registers, cleared at
+	 * VSYNC/EVSYNC */
+	bool shadow_dirty;
+
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool alpha_enabled;
+
+	bool manual_upd_display;
+	bool manual_update;
+	bool do_manual_update;
+
+	/* manual update region */
+	u16 x, y, w, h;
+};
+
+static struct {
+	spinlock_t lock;
+	struct overlay_cache_data overlay_cache[3];
+	struct manager_cache_data manager_cache[2];
+
+	bool irq_enabled;
+} dss_cache;
+
+
+
+static int omap_dss_set_device(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev)
+{
+	int i;
+	int r;
+
+	if (dssdev->manager) {
+		DSSERR("display '%s' already has a manager '%s'\n",
+			       dssdev->name, dssdev->manager->name);
+		return -EINVAL;
+	}
+
+	if ((mgr->supported_displays & dssdev->type) == 0) {
+		DSSERR("display '%s' does not support manager '%s'\n",
+			       dssdev->name, mgr->name);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < mgr->num_overlays; i++) {
+		struct omap_overlay *ovl = mgr->overlays[i];
+
+		if (ovl->manager != mgr || !ovl->info.enabled)
+			continue;
+
+		r = dss_check_overlay(ovl, dssdev);
+		if (r)
+			return r;
+	}
+
+	dssdev->manager = mgr;
+	mgr->device = dssdev;
+	mgr->device_changed = true;
+
+	return 0;
+}
+
+static int omap_dss_unset_device(struct omap_overlay_manager *mgr)
+{
+	if (!mgr->device) {
+		DSSERR("failed to unset display, display not set.\n");
+		return -EINVAL;
+	}
+
+	mgr->device->manager = NULL;
+	mgr->device = NULL;
+	mgr->device_changed = true;
+
+	return 0;
+}
+
+static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
+{
+	unsigned long timeout = msecs_to_jiffies(500);
+	struct manager_cache_data *mc;
+	enum omap_channel channel;
+	u32 irq;
+	int r;
+	int i;
+
+	if (!mgr->device)
+		return 0;
+
+	if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
+		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
+		channel = OMAP_DSS_CHANNEL_DIGIT;
+	} else {
+		if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+			enum omap_dss_update_mode mode;
+			mode = mgr->device->get_update_mode(mgr->device);
+			if (mode != OMAP_DSS_UPDATE_AUTO)
+				return 0;
+
+			irq = DISPC_IRQ_FRAMEDONE;
+		} else {
+			irq = DISPC_IRQ_VSYNC;
+		}
+		channel = OMAP_DSS_CHANNEL_LCD;
+	}
+
+	mc = &dss_cache.manager_cache[mgr->id];
+	i = 0;
+	while (1) {
+		unsigned long flags;
+		bool shadow_dirty, dirty;
+
+		spin_lock_irqsave(&dss_cache.lock, flags);
+		dirty = mc->dirty;
+		shadow_dirty = mc->shadow_dirty;
+		spin_unlock_irqrestore(&dss_cache.lock, flags);
+
+		if (!dirty && !shadow_dirty) {
+			r = 0;
+			break;
+		}
+
+		/* 4 iterations is the worst case:
+		 * 1 - initial iteration, dirty = true (between VFP and VSYNC)
+		 * 2 - first VSYNC, dirty = true
+		 * 3 - dirty = false, shadow_dirty = true
+		 * 4 - shadow_dirty = false */
+		if (i++ == 3) {
+			DSSERR("mgr(%d)->wait_for_go() not finishing\n",
+					mgr->id);
+			r = 0;
+			break;
+		}
+
+		r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+		if (r == -ERESTARTSYS)
+			break;
+
+		if (r) {
+			DSSERR("mgr(%d)->wait_for_go() timeout\n", mgr->id);
+			break;
+		}
+	}
+
+	return r;
+}
+
+int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
+{
+	unsigned long timeout = msecs_to_jiffies(500);
+	enum omap_channel channel;
+	struct overlay_cache_data *oc;
+	struct omap_dss_device *dssdev;
+	u32 irq;
+	int r;
+	int i;
+
+	if (!ovl->manager || !ovl->manager->device)
+		return 0;
+
+	dssdev = ovl->manager->device;
+
+	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
+		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
+		channel = OMAP_DSS_CHANNEL_DIGIT;
+	} else {
+		if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+			enum omap_dss_update_mode mode;
+			mode = dssdev->get_update_mode(dssdev);
+			if (mode != OMAP_DSS_UPDATE_AUTO)
+				return 0;
+
+			irq = DISPC_IRQ_FRAMEDONE;
+		} else {
+			irq = DISPC_IRQ_VSYNC;
+		}
+		channel = OMAP_DSS_CHANNEL_LCD;
+	}
+
+	oc = &dss_cache.overlay_cache[ovl->id];
+	i = 0;
+	while (1) {
+		unsigned long flags;
+		bool shadow_dirty, dirty;
+
+		spin_lock_irqsave(&dss_cache.lock, flags);
+		dirty = oc->dirty;
+		shadow_dirty = oc->shadow_dirty;
+		spin_unlock_irqrestore(&dss_cache.lock, flags);
+
+		if (!dirty && !shadow_dirty) {
+			r = 0;
+			break;
+		}
+
+		/* 4 iterations is the worst case:
+		 * 1 - initial iteration, dirty = true (between VFP and VSYNC)
+		 * 2 - first VSYNC, dirty = true
+		 * 3 - dirty = false, shadow_dirty = true
+		 * 4 - shadow_dirty = false */
+		if (i++ == 3) {
+			DSSERR("ovl(%d)->wait_for_go() not finishing\n",
+					ovl->id);
+			r = 0;
+			break;
+		}
+
+		r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+		if (r == -ERESTARTSYS)
+			break;
+
+		if (r) {
+			DSSERR("ovl(%d)->wait_for_go() timeout\n", ovl->id);
+			break;
+		}
+	}
+
+	return r;
+}
+
+static int overlay_enabled(struct omap_overlay *ovl)
+{
+	return ovl->info.enabled && ovl->manager && ovl->manager->device;
+}
+
+/* Is rect1 a subset of rect2? */
+static bool rectangle_subset(int x1, int y1, int w1, int h1,
+		int x2, int y2, int w2, int h2)
+{
+	if (x1 < x2 || y1 < y2)
+		return false;
+
+	if (x1 + w1 > x2 + w2)
+		return false;
+
+	if (y1 + h1 > y2 + h2)
+		return false;
+
+	return true;
+}
+
+/* Do rect1 and rect2 overlap? */
+static bool rectangle_intersects(int x1, int y1, int w1, int h1,
+		int x2, int y2, int w2, int h2)
+{
+	if (x1 >= x2 + w2)
+		return false;
+
+	if (x2 >= x1 + w1)
+		return false;
+
+	if (y1 >= y2 + h2)
+		return false;
+
+	if (y2 >= y1 + h1)
+		return false;
+
+	return true;
+}
+
+static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc)
+{
+	if (oc->out_width != 0 && oc->width != oc->out_width)
+		return true;
+
+	if (oc->out_height != 0 && oc->height != oc->out_height)
+		return true;
+
+	return false;
+}
+
+static int configure_overlay(enum omap_plane plane)
+{
+	struct overlay_cache_data *c;
+	struct manager_cache_data *mc;
+	u16 outw, outh;
+	u16 x, y, w, h;
+	u32 paddr;
+	int r;
+
+	DSSDBGF("%d", plane);
+
+	c = &dss_cache.overlay_cache[plane];
+
+	if (!c->enabled) {
+		dispc_enable_plane(plane, 0);
+		return 0;
+	}
+
+	mc = &dss_cache.manager_cache[c->channel];
+
+	x = c->pos_x;
+	y = c->pos_y;
+	w = c->width;
+	h = c->height;
+	outw = c->out_width == 0 ? c->width : c->out_width;
+	outh = c->out_height == 0 ? c->height : c->out_height;
+	paddr = c->paddr;
+
+	if (c->manual_update && mc->do_manual_update) {
+		unsigned bpp;
+		/* If the overlay is outside the update region, disable it */
+		if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
+					x, y, outw, outh)) {
+			dispc_enable_plane(plane, 0);
+			return 0;
+		}
+
+		switch (c->color_mode) {
+		case OMAP_DSS_COLOR_RGB16:
+		case OMAP_DSS_COLOR_ARGB16:
+		case OMAP_DSS_COLOR_YUV2:
+		case OMAP_DSS_COLOR_UYVY:
+			bpp = 16;
+			break;
+
+		case OMAP_DSS_COLOR_RGB24P:
+			bpp = 24;
+			break;
+
+		case OMAP_DSS_COLOR_RGB24U:
+		case OMAP_DSS_COLOR_ARGB32:
+		case OMAP_DSS_COLOR_RGBA32:
+		case OMAP_DSS_COLOR_RGBX32:
+			bpp = 32;
+			break;
+
+		default:
+			BUG();
+		}
+
+		if (dispc_is_overlay_scaled(c)) {
+			/* If the overlay is scaled, the update area has
+			 * already been enlarged to cover the whole overlay. We
+			 * only need to adjust x/y here */
+			x = c->pos_x - mc->x;
+			y = c->pos_y - mc->y;
+		} else {
+			if (mc->x > c->pos_x) {
+				x = 0;
+				w -= (mc->x - c->pos_x);
+				paddr += (mc->x - c->pos_x) * bpp / 8;
+			} else {
+				x = c->pos_x - mc->x;
+			}
+
+			if (mc->y > c->pos_y) {
+				y = 0;
+				h -= (mc->y - c->pos_y);
+				paddr += (mc->y - c->pos_y) * c->screen_width *
+					bpp / 8;
+			} else {
+				y = c->pos_y - mc->y;
+			}
+
+			if (mc->w < (x+w))
+				w -= (x+w) - (mc->w);
+
+			if (mc->h < (y+h))
+				h -= (y+h) - (mc->h);
+
+			outw = w;
+			outh = h;
+		}
+	}
+
+	r = dispc_setup_plane(plane,
+			paddr,
+			c->screen_width,
+			x, y,
+			w, h,
+			outw, outh,
+			c->color_mode,
+			c->ilace,
+			c->rotation_type,
+			c->rotation,
+			c->mirror,
+			c->global_alpha);
+
+	if (r) {
+		/* this shouldn't happen */
+		DSSERR("dispc_setup_plane failed for ovl %d\n", plane);
+		dispc_enable_plane(plane, 0);
+		return r;
+	}
+
+	dispc_enable_replication(plane, c->replication);
+
+	dispc_set_burst_size(plane, c->burst_size);
+	dispc_setup_plane_fifo(plane, c->fifo_low, c->fifo_high);
+
+	dispc_enable_plane(plane, 1);
+
+	return 0;
+}
+
+static void configure_manager(enum omap_channel channel)
+{
+	struct manager_cache_data *c;
+
+	DSSDBGF("%d", channel);
+
+	c = &dss_cache.manager_cache[channel];
+
+	dispc_set_trans_key(channel, c->trans_key_type, c->trans_key);
+	dispc_enable_trans_key(channel, c->trans_enabled);
+	dispc_enable_alpha_blending(channel, c->alpha_enabled);
+}
+
+/* configure_dispc() tries to write values from cache to shadow registers.
+ * It writes only to those managers/overlays that are not busy.
+ * returns 0 if everything could be written to shadow registers.
+ * returns 1 if not everything could be written to shadow registers. */
+static int configure_dispc(void)
+{
+	struct overlay_cache_data *oc;
+	struct manager_cache_data *mc;
+	const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
+	const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
+	int i;
+	int r;
+	bool mgr_busy[2];
+	bool mgr_go[2];
+	bool busy;
+
+	r = 0;
+	busy = false;
+
+	mgr_busy[0] = dispc_go_busy(0);
+	mgr_busy[1] = dispc_go_busy(1);
+	mgr_go[0] = false;
+	mgr_go[1] = false;
+
+	/* Commit overlay settings */
+	for (i = 0; i < num_ovls; ++i) {
+		oc = &dss_cache.overlay_cache[i];
+		mc = &dss_cache.manager_cache[oc->channel];
+
+		if (!oc->dirty)
+			continue;
+
+		if (oc->manual_update && !mc->do_manual_update)
+			continue;
+
+		if (mgr_busy[oc->channel]) {
+			busy = true;
+			continue;
+		}
+
+		r = configure_overlay(i);
+		if (r)
+			DSSERR("configure_overlay %d failed\n", i);
+
+		oc->dirty = false;
+		oc->shadow_dirty = true;
+		mgr_go[oc->channel] = true;
+	}
+
+	/* Commit manager settings */
+	for (i = 0; i < num_mgrs; ++i) {
+		mc = &dss_cache.manager_cache[i];
+
+		if (!mc->dirty)
+			continue;
+
+		if (mc->manual_update && !mc->do_manual_update)
+			continue;
+
+		if (mgr_busy[i]) {
+			busy = true;
+			continue;
+		}
+
+		configure_manager(i);
+		mc->dirty = false;
+		mc->shadow_dirty = true;
+		mgr_go[i] = true;
+	}
+
+	/* set GO */
+	for (i = 0; i < num_mgrs; ++i) {
+		mc = &dss_cache.manager_cache[i];
+
+		if (!mgr_go[i])
+			continue;
+
+		/* We don't need GO with manual update display. LCD iface will
+		 * always be turned off after frame, and new settings will be
+		 * taken in to use at next update */
+		if (!mc->manual_upd_display)
+			dispc_go(i);
+	}
+
+	if (busy)
+		r = 1;
+	else
+		r = 0;
+
+	return r;
+}
+
+/* Configure dispc for partial update. Return possibly modified update
+ * area */
+void dss_setup_partial_planes(struct omap_dss_device *dssdev,
+		u16 *xi, u16 *yi, u16 *wi, u16 *hi)
+{
+	struct overlay_cache_data *oc;
+	struct manager_cache_data *mc;
+	const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
+	struct omap_overlay_manager *mgr;
+	int i;
+	u16 x, y, w, h;
+	unsigned long flags;
+
+	x = *xi;
+	y = *yi;
+	w = *wi;
+	h = *hi;
+
+	DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n",
+		*xi, *yi, *wi, *hi);
+
+	mgr = dssdev->manager;
+
+	if (!mgr) {
+		DSSDBG("no manager\n");
+		return;
+	}
+
+	spin_lock_irqsave(&dss_cache.lock, flags);
+
+	/* We need to show the whole overlay if it is scaled. So look for
+	 * those, and make the update area larger if found.
+	 * Also mark the overlay cache dirty */
+	for (i = 0; i < num_ovls; ++i) {
+		unsigned x1, y1, x2, y2;
+		unsigned outw, outh;
+
+		oc = &dss_cache.overlay_cache[i];
+
+		if (oc->channel != mgr->id)
+			continue;
+
+		oc->dirty = true;
+
+		if (!oc->enabled)
+			continue;
+
+		if (!dispc_is_overlay_scaled(oc))
+			continue;
+
+		outw = oc->out_width == 0 ? oc->width : oc->out_width;
+		outh = oc->out_height == 0 ? oc->height : oc->out_height;
+
+		/* is the overlay outside the update region? */
+		if (!rectangle_intersects(x, y, w, h,
+					oc->pos_x, oc->pos_y,
+					outw, outh))
+			continue;
+
+		/* if the overlay totally inside the update region? */
+		if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
+					x, y, w, h))
+			continue;
+
+		if (x > oc->pos_x)
+			x1 = oc->pos_x;
+		else
+			x1 = x;
+
+		if (y > oc->pos_y)
+			y1 = oc->pos_y;
+		else
+			y1 = y;
+
+		if ((x + w) < (oc->pos_x + outw))
+			x2 = oc->pos_x + outw;
+		else
+			x2 = x + w;
+
+		if ((y + h) < (oc->pos_y + outh))
+			y2 = oc->pos_y + outh;
+		else
+			y2 = y + h;
+
+		x = x1;
+		y = y1;
+		w = x2 - x1;
+		h = y2 - y1;
+
+		DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
+				i, x, y, w, h);
+	}
+
+	mc = &dss_cache.manager_cache[mgr->id];
+	mc->do_manual_update = true;
+	mc->x = x;
+	mc->y = y;
+	mc->w = w;
+	mc->h = h;
+
+	configure_dispc();
+
+	mc->do_manual_update = false;
+
+	spin_unlock_irqrestore(&dss_cache.lock, flags);
+
+	*xi = x;
+	*yi = y;
+	*wi = w;
+	*hi = h;
+}
+
+void dss_start_update(struct omap_dss_device *dssdev)
+{
+	struct manager_cache_data *mc;
+	struct overlay_cache_data *oc;
+	const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
+	const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
+	struct omap_overlay_manager *mgr;
+	int i;
+
+	mgr = dssdev->manager;
+
+	for (i = 0; i < num_ovls; ++i) {
+		oc = &dss_cache.overlay_cache[i];
+		if (oc->channel != mgr->id)
+			continue;
+
+		oc->shadow_dirty = false;
+	}
+
+	for (i = 0; i < num_mgrs; ++i) {
+		mc = &dss_cache.manager_cache[i];
+		if (mgr->id != i)
+			continue;
+
+		mc->shadow_dirty = false;
+	}
+
+	dispc_enable_lcd_out(1);
+}
+
+static void dss_apply_irq_handler(void *data, u32 mask)
+{
+	struct manager_cache_data *mc;
+	struct overlay_cache_data *oc;
+	const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
+	const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
+	int i, r;
+	bool mgr_busy[2];
+
+	mgr_busy[0] = dispc_go_busy(0);
+	mgr_busy[1] = dispc_go_busy(1);
+
+	spin_lock(&dss_cache.lock);
+
+	for (i = 0; i < num_ovls; ++i) {
+		oc = &dss_cache.overlay_cache[i];
+		if (!mgr_busy[oc->channel])
+			oc->shadow_dirty = false;
+	}
+
+	for (i = 0; i < num_mgrs; ++i) {
+		mc = &dss_cache.manager_cache[i];
+		if (!mgr_busy[i])
+			mc->shadow_dirty = false;
+	}
+
+	r = configure_dispc();
+	if (r == 1)
+		goto end;
+
+	/* re-read busy flags */
+	mgr_busy[0] = dispc_go_busy(0);
+	mgr_busy[1] = dispc_go_busy(1);
+
+	/* keep running as long as there are busy managers, so that
+	 * we can collect overlay-applied information */
+	for (i = 0; i < num_mgrs; ++i) {
+		if (mgr_busy[i])
+			goto end;
+	}
+
+	omap_dispc_unregister_isr(dss_apply_irq_handler, NULL,
+			DISPC_IRQ_VSYNC	| DISPC_IRQ_EVSYNC_ODD |
+			DISPC_IRQ_EVSYNC_EVEN);
+	dss_cache.irq_enabled = false;
+
+end:
+	spin_unlock(&dss_cache.lock);
+}
+
+static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
+{
+	struct overlay_cache_data *oc;
+	struct manager_cache_data *mc;
+	int i;
+	struct omap_overlay *ovl;
+	int num_planes_enabled = 0;
+	bool use_fifomerge;
+	unsigned long flags;
+	int r;
+
+	DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name);
+
+	spin_lock_irqsave(&dss_cache.lock, flags);
+
+	/* Configure overlays */
+	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+		struct omap_dss_device *dssdev;
+
+		ovl = omap_dss_get_overlay(i);
+
+		if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+			continue;
+
+		oc = &dss_cache.overlay_cache[ovl->id];
+
+		if (!overlay_enabled(ovl)) {
+			if (oc->enabled) {
+				oc->enabled = false;
+				oc->dirty = true;
+			}
+			continue;
+		}
+
+		if (!ovl->info_dirty) {
+			if (oc->enabled)
+				++num_planes_enabled;
+			continue;
+		}
+
+		dssdev = ovl->manager->device;
+
+		if (dss_check_overlay(ovl, dssdev)) {
+			if (oc->enabled) {
+				oc->enabled = false;
+				oc->dirty = true;
+			}
+			continue;
+		}
+
+		ovl->info_dirty = false;
+		oc->dirty = true;
+
+		oc->paddr = ovl->info.paddr;
+		oc->vaddr = ovl->info.vaddr;
+		oc->screen_width = ovl->info.screen_width;
+		oc->width = ovl->info.width;
+		oc->height = ovl->info.height;
+		oc->color_mode = ovl->info.color_mode;
+		oc->rotation = ovl->info.rotation;
+		oc->rotation_type = ovl->info.rotation_type;
+		oc->mirror = ovl->info.mirror;
+		oc->pos_x = ovl->info.pos_x;
+		oc->pos_y = ovl->info.pos_y;
+		oc->out_width = ovl->info.out_width;
+		oc->out_height = ovl->info.out_height;
+		oc->global_alpha = ovl->info.global_alpha;
+
+		oc->replication =
+			dss_use_replication(dssdev, ovl->info.color_mode);
+
+		oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC;
+
+		oc->channel = ovl->manager->id;
+
+		oc->enabled = true;
+
+		oc->manual_update =
+			dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
+			dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+
+		++num_planes_enabled;
+	}
+
+	/* Configure managers */
+	list_for_each_entry(mgr, &manager_list, list) {
+		struct omap_dss_device *dssdev;
+
+		if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC))
+			continue;
+
+		mc = &dss_cache.manager_cache[mgr->id];
+
+		if (mgr->device_changed) {
+			mgr->device_changed = false;
+			mgr->info_dirty  = true;
+		}
+
+		if (!mgr->info_dirty)
+			continue;
+
+		if (!mgr->device)
+			continue;
+
+		dssdev = mgr->device;
+
+		mgr->info_dirty = false;
+		mc->dirty = true;
+
+		mc->default_color = mgr->info.default_color;
+		mc->trans_key_type = mgr->info.trans_key_type;
+		mc->trans_key = mgr->info.trans_key;
+		mc->trans_enabled = mgr->info.trans_enabled;
+		mc->alpha_enabled = mgr->info.alpha_enabled;
+
+		mc->manual_upd_display =
+			dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+
+		mc->manual_update =
+			dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
+			dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+	}
+
+	/* XXX TODO: Try to get fifomerge working. The problem is that it
+	 * affects both managers, not individually but at the same time. This
+	 * means the change has to be well synchronized. I guess the proper way
+	 * is to have a two step process for fifo merge:
+	 *        fifomerge enable:
+	 *             1. disable other planes, leaving one plane enabled
+	 *             2. wait until the planes are disabled on HW
+	 *             3. config merged fifo thresholds, enable fifomerge
+	 *        fifomerge disable:
+	 *             1. config unmerged fifo thresholds, disable fifomerge
+	 *             2. wait until fifo changes are in HW
+	 *             3. enable planes
+	 */
+	use_fifomerge = false;
+
+	/* Configure overlay fifos */
+	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+		struct omap_dss_device *dssdev;
+		u32 size;
+
+		ovl = omap_dss_get_overlay(i);
+
+		if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
+			continue;
+
+		oc = &dss_cache.overlay_cache[ovl->id];
+
+		if (!oc->enabled)
+			continue;
+
+		dssdev = ovl->manager->device;
+
+		size = dispc_get_plane_fifo_size(ovl->id);
+		if (use_fifomerge)
+			size *= 3;
+
+		switch (dssdev->type) {
+		case OMAP_DISPLAY_TYPE_DPI:
+		case OMAP_DISPLAY_TYPE_DBI:
+		case OMAP_DISPLAY_TYPE_SDI:
+		case OMAP_DISPLAY_TYPE_VENC:
+			default_get_overlay_fifo_thresholds(ovl->id, size,
+					&oc->burst_size, &oc->fifo_low,
+					&oc->fifo_high);
+			break;
+#ifdef CONFIG_OMAP2_DSS_DSI
+		case OMAP_DISPLAY_TYPE_DSI:
+			dsi_get_overlay_fifo_thresholds(ovl->id, size,
+					&oc->burst_size, &oc->fifo_low,
+					&oc->fifo_high);
+			break;
+#endif
+		default:
+			BUG();
+		}
+	}
+
+	r = 0;
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	if (!dss_cache.irq_enabled) {
+		r = omap_dispc_register_isr(dss_apply_irq_handler, NULL,
+				DISPC_IRQ_VSYNC	| DISPC_IRQ_EVSYNC_ODD |
+				DISPC_IRQ_EVSYNC_EVEN);
+		dss_cache.irq_enabled = true;
+	}
+	configure_dispc();
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	spin_unlock_irqrestore(&dss_cache.lock, flags);
+
+	return r;
+}
+
+static int dss_check_manager(struct omap_overlay_manager *mgr)
+{
+	/* OMAP supports only graphics source transparency color key and alpha
+	 * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */
+
+	if (mgr->info.alpha_enabled && mgr->info.trans_enabled &&
+			mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int omap_dss_mgr_set_info(struct omap_overlay_manager *mgr,
+		struct omap_overlay_manager_info *info)
+{
+	int r;
+	struct omap_overlay_manager_info old_info;
+
+	old_info = mgr->info;
+	mgr->info = *info;
+
+	r = dss_check_manager(mgr);
+	if (r) {
+		mgr->info = old_info;
+		return r;
+	}
+
+	mgr->info_dirty = true;
+
+	return 0;
+}
+
+static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr,
+		struct omap_overlay_manager_info *info)
+{
+	*info = mgr->info;
+}
+
+static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
+{
+	++num_managers;
+	list_add_tail(&manager->list, &manager_list);
+}
+
+int dss_init_overlay_managers(struct platform_device *pdev)
+{
+	int i, r;
+
+	spin_lock_init(&dss_cache.lock);
+
+	INIT_LIST_HEAD(&manager_list);
+
+	num_managers = 0;
+
+	for (i = 0; i < 2; ++i) {
+		struct omap_overlay_manager *mgr;
+		mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
+
+		BUG_ON(mgr == NULL);
+
+		switch (i) {
+		case 0:
+			mgr->name = "lcd";
+			mgr->id = OMAP_DSS_CHANNEL_LCD;
+			mgr->supported_displays =
+				OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
+				OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI;
+			break;
+		case 1:
+			mgr->name = "tv";
+			mgr->id = OMAP_DSS_CHANNEL_DIGIT;
+			mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC;
+			break;
+		}
+
+		mgr->set_device = &omap_dss_set_device;
+		mgr->unset_device = &omap_dss_unset_device;
+		mgr->apply = &omap_dss_mgr_apply;
+		mgr->set_manager_info = &omap_dss_mgr_set_info;
+		mgr->get_manager_info = &omap_dss_mgr_get_info;
+		mgr->wait_for_go = &dss_mgr_wait_for_go;
+
+		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
+
+		dss_overlay_setup_dispc_manager(mgr);
+
+		omap_dss_add_overlay_manager(mgr);
+
+		r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
+				&pdev->dev.kobj, "manager%d", i);
+
+		if (r) {
+			DSSERR("failed to create sysfs file\n");
+			continue;
+		}
+	}
+
+#ifdef L4_EXAMPLE
+	{
+		int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr)
+		{
+			DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name);
+
+			return 0;
+		}
+
+		struct omap_overlay_manager *mgr;
+		mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
+
+		BUG_ON(mgr == NULL);
+
+		mgr->name = "l4";
+		mgr->supported_displays =
+			OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI;
+
+		mgr->set_device = &omap_dss_set_device;
+		mgr->unset_device = &omap_dss_unset_device;
+		mgr->apply = &omap_dss_mgr_apply_l4;
+		mgr->set_manager_info = &omap_dss_mgr_set_info;
+		mgr->get_manager_info = &omap_dss_mgr_get_info;
+
+		dss_overlay_setup_l4_manager(mgr);
+
+		omap_dss_add_overlay_manager(mgr);
+
+		r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
+				&pdev->dev.kobj, "managerl4");
+
+		if (r)
+			DSSERR("failed to create sysfs file\n");
+	}
+#endif
+
+	return 0;
+}
+
+void dss_uninit_overlay_managers(struct platform_device *pdev)
+{
+	struct omap_overlay_manager *mgr;
+
+	while (!list_empty(&manager_list)) {
+		mgr = list_first_entry(&manager_list,
+				struct omap_overlay_manager, list);
+		list_del(&mgr->list);
+		kobject_del(&mgr->kobj);
+		kobject_put(&mgr->kobj);
+		kfree(mgr);
+	}
+
+	num_managers = 0;
+}
+
+int omap_dss_get_num_overlay_managers(void)
+{
+	return num_managers;
+}
+EXPORT_SYMBOL(omap_dss_get_num_overlay_managers);
+
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num)
+{
+	int i = 0;
+	struct omap_overlay_manager *mgr;
+
+	list_for_each_entry(mgr, &manager_list, list) {
+		if (i++ == num)
+			return mgr;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(omap_dss_get_overlay_manager);
+
--- /dev/null
+++ b/drivers/video/omap2/dss/overlay.c
@@ -0,0 +1,673 @@
+/*
+ * linux/drivers/video/omap2/dss/overlay.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "OVERLAY"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/display.h>
+
+#include "dss.h"
+
+static int num_overlays;
+static struct list_head overlay_list;
+
+static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
+}
+
+static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ovl->manager ? ovl->manager->name : "<none>");
+}
+
+static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
+		size_t size)
+{
+	int i, r;
+	struct omap_overlay_manager *mgr = NULL;
+	struct omap_overlay_manager *old_mgr;
+	int len = size;
+
+	if (buf[size-1] == '\n')
+		--len;
+
+	if (len > 0) {
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			mgr = omap_dss_get_overlay_manager(i);
+
+			if (strncmp(buf, mgr->name, len) == 0)
+				break;
+
+			mgr = NULL;
+		}
+	}
+
+	if (len > 0 && mgr == NULL)
+		return -EINVAL;
+
+	if (mgr)
+		DSSDBG("manager %s found\n", mgr->name);
+
+	if (mgr == ovl->manager)
+		return size;
+
+	old_mgr = ovl->manager;
+
+	/* detach old manager */
+	if (old_mgr) {
+		r = ovl->unset_manager(ovl);
+		if (r) {
+			DSSERR("detach failed\n");
+			return r;
+		}
+
+		r = old_mgr->apply(old_mgr);
+		if (r)
+			return r;
+	}
+
+	if (mgr) {
+		r = ovl->set_manager(ovl, mgr);
+		if (r) {
+			DSSERR("Failed to attach overlay\n");
+			return r;
+		}
+
+		r = mgr->apply(mgr);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			ovl->info.width, ovl->info.height);
+}
+
+static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width);
+}
+
+static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			ovl->info.pos_x, ovl->info.pos_y);
+}
+
+static ssize_t overlay_position_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	char *last;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.pos_x = simple_strtoul(buf, &last, 10);
+	++last;
+	if (last - buf >= size)
+		return -EINVAL;
+
+	info.pos_y = simple_strtoul(last, &last, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			ovl->info.out_width, ovl->info.out_height);
+}
+
+static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	char *last;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.out_width = simple_strtoul(buf, &last, 10);
+	++last;
+	if (last - buf >= size)
+		return -EINVAL;
+
+	info.out_height = simple_strtoul(last, &last, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled);
+}
+
+static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
+		size_t size)
+{
+	int r;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.enabled = simple_strtoul(buf, NULL, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			ovl->info.global_alpha);
+}
+
+static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	/* Video1 plane does not support global alpha
+	 * to always make it 255 completely opaque
+	 */
+	if (ovl->id == OMAP_DSS_VIDEO1)
+		info.global_alpha = 255;
+	else
+		info.global_alpha = simple_strtoul(buf, NULL, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+struct overlay_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct omap_overlay *, char *);
+	ssize_t	(*store)(struct omap_overlay *, const char *, size_t);
+};
+
+#define OVERLAY_ATTR(_name, _mode, _show, _store) \
+	struct overlay_attribute overlay_attr_##_name = \
+	__ATTR(_name, _mode, _show, _store)
+
+static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
+static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
+		overlay_manager_show, overlay_manager_store);
+static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
+static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
+static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
+		overlay_position_show, overlay_position_store);
+static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
+		overlay_output_size_show, overlay_output_size_store);
+static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
+		overlay_enabled_show, overlay_enabled_store);
+static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
+		overlay_global_alpha_show, overlay_global_alpha_store);
+
+static struct attribute *overlay_sysfs_attrs[] = {
+	&overlay_attr_name.attr,
+	&overlay_attr_manager.attr,
+	&overlay_attr_input_size.attr,
+	&overlay_attr_screen_width.attr,
+	&overlay_attr_position.attr,
+	&overlay_attr_output_size.attr,
+	&overlay_attr_enabled.attr,
+	&overlay_attr_global_alpha.attr,
+	NULL
+};
+
+static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
+		char *buf)
+{
+	struct omap_overlay *overlay;
+	struct overlay_attribute *overlay_attr;
+
+	overlay = container_of(kobj, struct omap_overlay, kobj);
+	overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+	if (!overlay_attr->show)
+		return -ENOENT;
+
+	return overlay_attr->show(overlay, buf);
+}
+
+static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay *overlay;
+	struct overlay_attribute *overlay_attr;
+
+	overlay = container_of(kobj, struct omap_overlay, kobj);
+	overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+	if (!overlay_attr->store)
+		return -ENOENT;
+
+	return overlay_attr->store(overlay, buf, size);
+}
+
+static struct sysfs_ops overlay_sysfs_ops = {
+	.show = overlay_attr_show,
+	.store = overlay_attr_store,
+};
+
+static struct kobj_type overlay_ktype = {
+	.sysfs_ops = &overlay_sysfs_ops,
+	.default_attrs = overlay_sysfs_attrs,
+};
+
+/* Check if overlay parameters are compatible with display */
+int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev)
+{
+	struct omap_overlay_info *info;
+	u16 outw, outh;
+	u16 dw, dh;
+
+	if (!dssdev)
+		return 0;
+
+	if (!ovl->info.enabled)
+		return 0;
+
+	info = &ovl->info;
+
+	if (info->paddr == 0) {
+		DSSDBG("check_overlay failed: paddr 0\n");
+		return -EINVAL;
+	}
+
+	dssdev->get_resolution(dssdev, &dw, &dh);
+
+	DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
+			ovl->id,
+			info->pos_x, info->pos_y,
+			info->width, info->height,
+			info->out_width, info->out_height,
+			dw, dh);
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
+		outw = info->width;
+		outh = info->height;
+	} else {
+		if (info->out_width == 0)
+			outw = info->width;
+		else
+			outw = info->out_width;
+
+		if (info->out_height == 0)
+			outh = info->height;
+		else
+			outh = info->out_height;
+	}
+
+	if (dw < info->pos_x + outw) {
+		DSSDBG("check_overlay failed 1: %d < %d + %d\n",
+				dw, info->pos_x, outw);
+		return -EINVAL;
+	}
+
+	if (dh < info->pos_y + outh) {
+		DSSDBG("check_overlay failed 2: %d < %d + %d\n",
+				dh, info->pos_y, outh);
+		return -EINVAL;
+	}
+
+	if ((ovl->supported_modes & info->color_mode) == 0) {
+		DSSERR("overlay doesn't support mode %d\n", info->color_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dss_ovl_set_overlay_info(struct omap_overlay *ovl,
+		struct omap_overlay_info *info)
+{
+	int r;
+	struct omap_overlay_info old_info;
+
+	old_info = ovl->info;
+	ovl->info = *info;
+
+	if (ovl->manager) {
+		r = dss_check_overlay(ovl, ovl->manager->device);
+		if (r) {
+			ovl->info = old_info;
+			return r;
+		}
+	}
+
+	ovl->info_dirty = true;
+
+	return 0;
+}
+
+static void dss_ovl_get_overlay_info(struct omap_overlay *ovl,
+		struct omap_overlay_info *info)
+{
+	*info = ovl->info;
+}
+
+static int dss_ovl_wait_for_go(struct omap_overlay *ovl)
+{
+	return dss_mgr_wait_for_go_ovl(ovl);
+}
+
+static int omap_dss_set_manager(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr)
+{
+	if (!mgr)
+		return -EINVAL;
+
+	if (ovl->manager) {
+		DSSERR("overlay '%s' already has a manager '%s'\n",
+				ovl->name, ovl->manager->name);
+		return -EINVAL;
+	}
+
+	if (ovl->info.enabled) {
+		DSSERR("overlay has to be disabled to change the manager\n");
+		return -EINVAL;
+	}
+
+	ovl->manager = mgr;
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	/* XXX: on manual update display, in auto update mode, a bug happens
+	 * here. When an overlay is first enabled on LCD, then it's disabled,
+	 * and the manager is changed to TV, we sometimes get SYNC_LOST_DIGIT
+	 * errors. Waiting before changing the channel_out fixes it. I'm
+	 * guessing that the overlay is still somehow being used for the LCD,
+	 * but I don't understand how or why. */
+	msleep(40);
+	dispc_set_channel_out(ovl->id, mgr->id);
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	return 0;
+}
+
+static int omap_dss_unset_manager(struct omap_overlay *ovl)
+{
+	int r;
+
+	if (!ovl->manager) {
+		DSSERR("failed to detach overlay: manager not set\n");
+		return -EINVAL;
+	}
+
+	if (ovl->info.enabled) {
+		DSSERR("overlay has to be disabled to unset the manager\n");
+		return -EINVAL;
+	}
+
+	r = ovl->wait_for_go(ovl);
+	if (r)
+		return r;
+
+	ovl->manager = NULL;
+
+	return 0;
+}
+
+int omap_dss_get_num_overlays(void)
+{
+	return num_overlays;
+}
+EXPORT_SYMBOL(omap_dss_get_num_overlays);
+
+struct omap_overlay *omap_dss_get_overlay(int num)
+{
+	int i = 0;
+	struct omap_overlay *ovl;
+
+	list_for_each_entry(ovl, &overlay_list, list) {
+		if (i++ == num)
+			return ovl;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(omap_dss_get_overlay);
+
+static void omap_dss_add_overlay(struct omap_overlay *overlay)
+{
+	++num_overlays;
+	list_add_tail(&overlay->list, &overlay_list);
+}
+
+static struct omap_overlay *dispc_overlays[3];
+
+void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr)
+{
+	mgr->num_overlays = 3;
+	mgr->overlays = dispc_overlays;
+}
+
+#ifdef L4_EXAMPLE
+static struct omap_overlay *l4_overlays[1];
+void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr)
+{
+	mgr->num_overlays = 1;
+	mgr->overlays = l4_overlays;
+}
+#endif
+
+void dss_init_overlays(struct platform_device *pdev)
+{
+	int i, r;
+
+	INIT_LIST_HEAD(&overlay_list);
+
+	num_overlays = 0;
+
+	for (i = 0; i < 3; ++i) {
+		struct omap_overlay *ovl;
+		ovl = kzalloc(sizeof(*ovl), GFP_KERNEL);
+
+		BUG_ON(ovl == NULL);
+
+		switch (i) {
+		case 0:
+			ovl->name = "gfx";
+			ovl->id = OMAP_DSS_GFX;
+			ovl->supported_modes = OMAP_DSS_COLOR_GFX_OMAP3;
+			ovl->caps = OMAP_DSS_OVL_CAP_DISPC;
+			ovl->info.global_alpha = 255;
+			break;
+		case 1:
+			ovl->name = "vid1";
+			ovl->id = OMAP_DSS_VIDEO1;
+			ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
+			ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
+				OMAP_DSS_OVL_CAP_DISPC;
+			ovl->info.global_alpha = 255;
+			break;
+		case 2:
+			ovl->name = "vid2";
+			ovl->id = OMAP_DSS_VIDEO2;
+			ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
+			ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
+				OMAP_DSS_OVL_CAP_DISPC;
+			ovl->info.global_alpha = 255;
+			break;
+		}
+
+		ovl->set_manager = &omap_dss_set_manager;
+		ovl->unset_manager = &omap_dss_unset_manager;
+		ovl->set_overlay_info = &dss_ovl_set_overlay_info;
+		ovl->get_overlay_info = &dss_ovl_get_overlay_info;
+		ovl->wait_for_go = &dss_ovl_wait_for_go;
+
+		omap_dss_add_overlay(ovl);
+
+		r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
+				&pdev->dev.kobj, "overlay%d", i);
+
+		if (r) {
+			DSSERR("failed to create sysfs file\n");
+			continue;
+		}
+
+		dispc_overlays[i] = ovl;
+	}
+
+#ifdef L4_EXAMPLE
+	{
+		struct omap_overlay *ovl;
+		ovl = kzalloc(sizeof(*ovl), GFP_KERNEL);
+
+		BUG_ON(ovl == NULL);
+
+		ovl->name = "l4";
+		ovl->supported_modes = OMAP_DSS_COLOR_RGB24U;
+
+		ovl->set_manager = &omap_dss_set_manager;
+		ovl->unset_manager = &omap_dss_unset_manager;
+		ovl->set_overlay_info = &dss_ovl_set_overlay_info;
+		ovl->get_overlay_info = &dss_ovl_get_overlay_info;
+
+		omap_dss_add_overlay(ovl);
+
+		r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
+				&pdev->dev.kobj, "overlayl4");
+
+		if (r)
+			DSSERR("failed to create sysfs file\n");
+
+		l4_overlays[0] = ovl;
+	}
+#endif
+}
+
+/* connect overlays to the new device, if not already connected. if force
+ * selected, connect always. */
+void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
+{
+	int i;
+	struct omap_overlay_manager *lcd_mgr;
+	struct omap_overlay_manager *tv_mgr;
+	struct omap_overlay_manager *mgr = NULL;
+
+	lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
+	tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
+
+	if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) {
+		if (!lcd_mgr->device || force) {
+			if (lcd_mgr->device)
+				lcd_mgr->unset_device(lcd_mgr);
+			lcd_mgr->set_device(lcd_mgr, dssdev);
+			mgr = lcd_mgr;
+		}
+	}
+
+	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
+		if (!tv_mgr->device || force) {
+			if (tv_mgr->device)
+				tv_mgr->unset_device(tv_mgr);
+			tv_mgr->set_device(tv_mgr, dssdev);
+			mgr = tv_mgr;
+		}
+	}
+
+	if (mgr) {
+		for (i = 0; i < 3; i++) {
+			struct omap_overlay *ovl;
+			ovl = omap_dss_get_overlay(i);
+			if (!ovl->manager || force) {
+				if (ovl->manager)
+					omap_dss_unset_manager(ovl);
+				omap_dss_set_manager(ovl, mgr);
+			}
+		}
+	}
+}
+
+void dss_uninit_overlays(struct platform_device *pdev)
+{
+	struct omap_overlay *ovl;
+
+	while (!list_empty(&overlay_list)) {
+		ovl = list_first_entry(&overlay_list,
+				struct omap_overlay, list);
+		list_del(&ovl->list);
+		kobject_del(&ovl->kobj);
+		kobject_put(&ovl->kobj);
+		kfree(ovl);
+	}
+
+	num_overlays = 0;
+}
+
--- /dev/null
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -0,0 +1,1310 @@
+/*
+ * linux/drivers/video/omap2/dss/rfbi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "RFBI"
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/kfifo.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/seq_file.h>
+
+#include <mach/board.h>
+#include <mach/display.h>
+#include "dss.h"
+
+/*#define MEASURE_PERF*/
+
+#define RFBI_BASE               0x48050800
+
+struct rfbi_reg { u16 idx; };
+
+#define RFBI_REG(idx)		((const struct rfbi_reg) { idx })
+
+#define RFBI_REVISION		RFBI_REG(0x0000)
+#define RFBI_SYSCONFIG		RFBI_REG(0x0010)
+#define RFBI_SYSSTATUS		RFBI_REG(0x0014)
+#define RFBI_CONTROL		RFBI_REG(0x0040)
+#define RFBI_PIXEL_CNT		RFBI_REG(0x0044)
+#define RFBI_LINE_NUMBER	RFBI_REG(0x0048)
+#define RFBI_CMD		RFBI_REG(0x004c)
+#define RFBI_PARAM		RFBI_REG(0x0050)
+#define RFBI_DATA		RFBI_REG(0x0054)
+#define RFBI_READ		RFBI_REG(0x0058)
+#define RFBI_STATUS		RFBI_REG(0x005c)
+
+#define RFBI_CONFIG(n)		RFBI_REG(0x0060 + (n)*0x18)
+#define RFBI_ONOFF_TIME(n)	RFBI_REG(0x0064 + (n)*0x18)
+#define RFBI_CYCLE_TIME(n)	RFBI_REG(0x0068 + (n)*0x18)
+#define RFBI_DATA_CYCLE1(n)	RFBI_REG(0x006c + (n)*0x18)
+#define RFBI_DATA_CYCLE2(n)	RFBI_REG(0x0070 + (n)*0x18)
+#define RFBI_DATA_CYCLE3(n)	RFBI_REG(0x0074 + (n)*0x18)
+
+#define RFBI_VSYNC_WIDTH	RFBI_REG(0x0090)
+#define RFBI_HSYNC_WIDTH	RFBI_REG(0x0094)
+
+#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
+
+#define REG_FLD_MOD(idx, val, start, end) \
+	rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
+
+/* To work around an RFBI transfer rate limitation */
+#define OMAP_RFBI_RATE_LIMIT    1
+
+enum omap_rfbi_cycleformat {
+	OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
+	OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
+	OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2,
+	OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3,
+};
+
+enum omap_rfbi_datatype {
+	OMAP_DSS_RFBI_DATATYPE_12 = 0,
+	OMAP_DSS_RFBI_DATATYPE_16 = 1,
+	OMAP_DSS_RFBI_DATATYPE_18 = 2,
+	OMAP_DSS_RFBI_DATATYPE_24 = 3,
+};
+
+enum omap_rfbi_parallelmode {
+	OMAP_DSS_RFBI_PARALLELMODE_8 = 0,
+	OMAP_DSS_RFBI_PARALLELMODE_9 = 1,
+	OMAP_DSS_RFBI_PARALLELMODE_12 = 2,
+	OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
+};
+
+enum update_cmd {
+	RFBI_CMD_UPDATE = 0,
+	RFBI_CMD_SYNC   = 1,
+};
+
+static int rfbi_convert_timings(struct rfbi_timings *t);
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
+static void process_cmd_fifo(void);
+
+static struct {
+	void __iomem	*base;
+
+	unsigned long	l4_khz;
+
+	enum omap_rfbi_datatype datatype;
+	enum omap_rfbi_parallelmode parallelmode;
+
+	enum omap_rfbi_te_mode te_mode;
+	int te_enabled;
+
+	void (*framedone_callback)(void *data);
+	void *framedone_callback_data;
+
+	struct omap_dss_device *dssdev[2];
+
+	struct kfifo      *cmd_fifo;
+	spinlock_t        cmd_lock;
+	struct completion cmd_done;
+	atomic_t          cmd_fifo_full;
+	atomic_t          cmd_pending;
+#ifdef MEASURE_PERF
+	unsigned perf_bytes;
+	ktime_t perf_setup_time;
+	ktime_t perf_start_time;
+#endif
+} rfbi;
+
+struct update_region {
+	u16	x;
+	u16     y;
+	u16     w;
+	u16     h;
+};
+
+struct update_param {
+	u8 rfbi_module;
+	u8 cmd;
+
+	union {
+		struct update_region r;
+		struct completion *sync;
+	} par;
+};
+
+static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
+{
+	__raw_writel(val, rfbi.base + idx.idx);
+}
+
+static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
+{
+	return __raw_readl(rfbi.base + idx.idx);
+}
+
+static void rfbi_enable_clocks(bool enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	else
+		dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+void omap_rfbi_write_command(const void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		const u8 *b = buf;
+		for (; len; len--)
+			rfbi_write_reg(RFBI_CMD, *b++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		const u16 *w = buf;
+		BUG_ON(len & 1);
+		for (; len; len -= 2)
+			rfbi_write_reg(RFBI_CMD, *w++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_command);
+
+void omap_rfbi_read_data(void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		u8 *b = buf;
+		for (; len; len--) {
+			rfbi_write_reg(RFBI_READ, 0);
+			*b++ = rfbi_read_reg(RFBI_READ);
+		}
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		u16 *w = buf;
+		BUG_ON(len & ~1);
+		for (; len; len -= 2) {
+			rfbi_write_reg(RFBI_READ, 0);
+			*w++ = rfbi_read_reg(RFBI_READ);
+		}
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_read_data);
+
+void omap_rfbi_write_data(const void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		const u8 *b = buf;
+		for (; len; len--)
+			rfbi_write_reg(RFBI_PARAM, *b++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		const u16 *w = buf;
+		BUG_ON(len & 1);
+		for (; len; len -= 2)
+			rfbi_write_reg(RFBI_PARAM, *w++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_data);
+
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h)
+{
+	int start_offset = scr_width * y + x;
+	int horiz_offset = scr_width - w;
+	int i;
+
+	rfbi_enable_clocks(1);
+
+	if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+		const u16 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				const u8 __iomem *b = (const u8 __iomem *)pd;
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+		const u32 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				const u8 __iomem *b = (const u8 __iomem *)pd;
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) {
+		const u16 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else {
+		BUG();
+	}
+
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_pixels);
+
+#ifdef MEASURE_PERF
+static void perf_mark_setup(void)
+{
+	rfbi.perf_setup_time = ktime_get();
+}
+
+static void perf_mark_start(void)
+{
+	rfbi.perf_start_time = ktime_get();
+}
+
+static void perf_show(const char *name)
+{
+	ktime_t t, setup_time, trans_time;
+	u32 total_bytes;
+	u32 setup_us, trans_us, total_us;
+
+	t = ktime_get();
+
+	setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
+	setup_us = (u32)ktime_to_us(setup_time);
+	if (setup_us == 0)
+		setup_us = 1;
+
+	trans_time = ktime_sub(t, rfbi.perf_start_time);
+	trans_us = (u32)ktime_to_us(trans_time);
+	if (trans_us == 0)
+		trans_us = 1;
+
+	total_us = setup_us + trans_us;
+
+	total_bytes = rfbi.perf_bytes;
+
+	DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
+			"%u kbytes/sec\n",
+			name,
+			setup_us,
+			trans_us,
+			total_us,
+			1000*1000 / total_us,
+			total_bytes,
+			total_bytes * 1000 / total_us);
+}
+#else
+#define perf_mark_setup()
+#define perf_mark_start()
+#define perf_show(x)
+#endif
+
+void rfbi_transfer_area(u16 width, u16 height,
+			     void (callback)(void *data), void *data)
+{
+	u32 l;
+
+	/*BUG_ON(callback == 0);*/
+	BUG_ON(rfbi.framedone_callback != NULL);
+
+	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
+
+	dispc_set_lcd_size(width, height);
+
+	dispc_enable_lcd_out(1);
+
+	rfbi.framedone_callback = callback;
+	rfbi.framedone_callback_data = data;
+
+	rfbi_enable_clocks(1);
+
+	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+	l = FLD_MOD(l, 1, 0, 0); /* enable */
+	if (!rfbi.te_enabled)
+		l = FLD_MOD(l, 1, 4, 4); /* ITE */
+
+	perf_mark_start();
+
+	rfbi_write_reg(RFBI_CONTROL, l);
+}
+
+static void framedone_callback(void *data, u32 mask)
+{
+	void (*callback)(void *data);
+
+	DSSDBG("FRAMEDONE\n");
+
+	perf_show("DISPC");
+
+	REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
+
+	rfbi_enable_clocks(0);
+
+	callback = rfbi.framedone_callback;
+	rfbi.framedone_callback = NULL;
+
+	/*callback(rfbi.framedone_callback_data);*/
+
+	atomic_set(&rfbi.cmd_pending, 0);
+
+	process_cmd_fifo();
+}
+
+#if 1 /* VERBOSE */
+static void rfbi_print_timings(void)
+{
+	u32 l;
+	u32 time;
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	time = 1000000000 / rfbi.l4_khz;
+	if (l & (1 << 4))
+		time *= 2;
+
+	DSSDBG("Tick time %u ps\n", time);
+	l = rfbi_read_reg(RFBI_ONOFF_TIME(0));
+	DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
+		"REONTIME %d, REOFFTIME %d\n",
+		l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
+		(l >> 20) & 0x0f, (l >> 24) & 0x3f);
+
+	l = rfbi_read_reg(RFBI_CYCLE_TIME(0));
+	DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
+		"ACCESSTIME %d\n",
+		(l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
+		(l >> 22) & 0x3f);
+}
+#else
+static void rfbi_print_timings(void) {}
+#endif
+
+
+
+
+static u32 extif_clk_period;
+
+static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
+{
+	int bus_tick = extif_clk_period * div;
+	return (ps + bus_tick - 1) / bus_tick * bus_tick;
+}
+
+static int calc_reg_timing(struct rfbi_timings *t, int div)
+{
+	t->clk_div = div;
+
+	t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div);
+
+	t->we_on_time = round_to_extif_ticks(t->we_on_time, div);
+	t->we_off_time = round_to_extif_ticks(t->we_off_time, div);
+	t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div);
+
+	t->re_on_time = round_to_extif_ticks(t->re_on_time, div);
+	t->re_off_time = round_to_extif_ticks(t->re_off_time, div);
+	t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div);
+
+	t->access_time = round_to_extif_ticks(t->access_time, div);
+	t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div);
+	t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div);
+
+	DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n",
+	       t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
+	DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n",
+	       t->we_on_time, t->we_off_time, t->re_cycle_time,
+	       t->we_cycle_time);
+	DSSDBG("[reg]rdaccess %d cspulse %d\n",
+	       t->access_time, t->cs_pulse_width);
+
+	return rfbi_convert_timings(t);
+}
+
+static int calc_extif_timings(struct rfbi_timings *t)
+{
+	u32 max_clk_div;
+	int div;
+
+	rfbi_get_clk_info(&extif_clk_period, &max_clk_div);
+	for (div = 1; div <= max_clk_div; div++) {
+		if (calc_reg_timing(t, div) == 0)
+			break;
+	}
+
+	if (div <= max_clk_div)
+		return 0;
+
+	DSSERR("can't setup timings\n");
+	return -1;
+}
+
+
+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
+{
+	int r;
+
+	if (!t->converted) {
+		r = calc_extif_timings(t);
+		if (r < 0)
+			DSSERR("Failed to calc timings\n");
+	}
+
+	BUG_ON(!t->converted);
+
+	rfbi_enable_clocks(1);
+	rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]);
+	rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]);
+
+	/* TIMEGRANULARITY */
+	REG_FLD_MOD(RFBI_CONFIG(rfbi_module),
+		    (t->tim[2] ? 1 : 0), 4, 4);
+
+	rfbi_print_timings();
+	rfbi_enable_clocks(0);
+}
+
+static int ps_to_rfbi_ticks(int time, int div)
+{
+	unsigned long tick_ps;
+	int ret;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = 1000000000 / (rfbi.l4_khz) * div;
+
+	ret = (time + tick_ps - 1) / tick_ps;
+
+	return ret;
+}
+
+#ifdef OMAP_RFBI_RATE_LIMIT
+unsigned long rfbi_get_max_tx_rate(void)
+{
+	unsigned long   l4_rate, dss1_rate;
+	int             min_l4_ticks = 0;
+	int             i;
+
+	/* According to TI this can't be calculated so make the
+	 * adjustments for a couple of known frequencies and warn for
+	 * others.
+	 */
+	static const struct {
+		unsigned long l4_clk;           /* HZ */
+		unsigned long dss1_clk;         /* HZ */
+		unsigned long min_l4_ticks;
+	} ftab[] = {
+		{ 55,   132,    7, },           /* 7.86 MPix/s */
+		{ 110,  110,    12, },          /* 9.16 MPix/s */
+		{ 110,  132,    10, },          /* 11   Mpix/s */
+		{ 120,  120,    10, },          /* 12   Mpix/s */
+		{ 133,  133,    10, },          /* 13.3 Mpix/s */
+	};
+
+	l4_rate = rfbi.l4_khz / 1000;
+	dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000;
+
+	for (i = 0; i < ARRAY_SIZE(ftab); i++) {
+		/* Use a window instead of an exact match, to account
+		 * for different DPLL multiplier / divider pairs.
+		 */
+		if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
+		    abs(ftab[i].dss1_clk - dss1_rate) < 3) {
+			min_l4_ticks = ftab[i].min_l4_ticks;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(ftab)) {
+		/* Can't be sure, return anyway the maximum not
+		 * rate-limited. This might cause a problem only for the
+		 * tearing synchronisation.
+		 */
+		DSSERR("can't determine maximum RFBI transfer rate\n");
+		return rfbi.l4_khz * 1000;
+	}
+	return rfbi.l4_khz * 1000 / min_l4_ticks;
+}
+#else
+int rfbi_get_max_tx_rate(void)
+{
+	return rfbi.l4_khz * 1000;
+}
+#endif
+
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
+{
+	*clk_period = 1000000000 / rfbi.l4_khz;
+	*max_clk_div = 2;
+}
+
+static int rfbi_convert_timings(struct rfbi_timings *t)
+{
+	u32 l;
+	int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
+	int actim, recyc, wecyc;
+	int div = t->clk_div;
+
+	if (div <= 0 || div > 2)
+		return -1;
+
+	/* Make sure that after conversion it still holds that:
+	 * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
+	 * csoff > cson, csoff >= max(weoff, reoff), actim > reon
+	 */
+	weon = ps_to_rfbi_ticks(t->we_on_time, div);
+	weoff = ps_to_rfbi_ticks(t->we_off_time, div);
+	if (weoff <= weon)
+		weoff = weon + 1;
+	if (weon > 0x0f)
+		return -1;
+	if (weoff > 0x3f)
+		return -1;
+
+	reon = ps_to_rfbi_ticks(t->re_on_time, div);
+	reoff = ps_to_rfbi_ticks(t->re_off_time, div);
+	if (reoff <= reon)
+		reoff = reon + 1;
+	if (reon > 0x0f)
+		return -1;
+	if (reoff > 0x3f)
+		return -1;
+
+	cson = ps_to_rfbi_ticks(t->cs_on_time, div);
+	csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
+	if (csoff <= cson)
+		csoff = cson + 1;
+	if (csoff < max(weoff, reoff))
+		csoff = max(weoff, reoff);
+	if (cson > 0x0f)
+		return -1;
+	if (csoff > 0x3f)
+		return -1;
+
+	l =  cson;
+	l |= csoff << 4;
+	l |= weon  << 10;
+	l |= weoff << 14;
+	l |= reon  << 20;
+	l |= reoff << 24;
+
+	t->tim[0] = l;
+
+	actim = ps_to_rfbi_ticks(t->access_time, div);
+	if (actim <= reon)
+		actim = reon + 1;
+	if (actim > 0x3f)
+		return -1;
+
+	wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
+	if (wecyc < weoff)
+		wecyc = weoff;
+	if (wecyc > 0x3f)
+		return -1;
+
+	recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
+	if (recyc < reoff)
+		recyc = reoff;
+	if (recyc > 0x3f)
+		return -1;
+
+	cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
+	if (cs_pulse > 0x3f)
+		return -1;
+
+	l =  wecyc;
+	l |= recyc    << 6;
+	l |= cs_pulse << 12;
+	l |= actim    << 22;
+
+	t->tim[1] = l;
+
+	t->tim[2] = div - 1;
+
+	t->converted = 1;
+
+	return 0;
+}
+
+/* xxx FIX module selection missing */
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div)
+{
+	int hs, vs;
+	int min;
+	u32 l;
+
+	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
+	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
+	if (hs < 2)
+		return -EDOM;
+	if (mode == OMAP_DSS_RFBI_TE_MODE_2)
+		min = 2;
+	else /* OMAP_DSS_RFBI_TE_MODE_1 */
+		min = 4;
+	if (vs < min)
+		return -EDOM;
+	if (vs == hs)
+		return -EINVAL;
+	rfbi.te_mode = mode;
+	DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n",
+		mode, hs, vs, hs_pol_inv, vs_pol_inv);
+
+	rfbi_enable_clocks(1);
+	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
+	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	if (hs_pol_inv)
+		l &= ~(1 << 21);
+	else
+		l |= 1 << 21;
+	if (vs_pol_inv)
+		l &= ~(1 << 20);
+	else
+		l |= 1 << 20;
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_setup_te);
+
+/* xxx FIX module selection missing */
+int omap_rfbi_enable_te(bool enable, unsigned line)
+{
+	u32 l;
+
+	DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode);
+	if (line > (1 << 11) - 1)
+		return -EINVAL;
+
+	rfbi_enable_clocks(1);
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	l &= ~(0x3 << 2);
+	if (enable) {
+		rfbi.te_enabled = 1;
+		l |= rfbi.te_mode << 2;
+	} else
+		rfbi.te_enabled = 0;
+	rfbi_write_reg(RFBI_CONFIG(0), l);
+	rfbi_write_reg(RFBI_LINE_NUMBER, line);
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_enable_te);
+
+#if 0
+static void rfbi_enable_config(int enable1, int enable2)
+{
+	u32 l;
+	int cs = 0;
+
+	if (enable1)
+		cs |= 1<<0;
+	if (enable2)
+		cs |= 1<<1;
+
+	rfbi_enable_clocks(1);
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+
+	l = FLD_MOD(l, cs, 3, 2);
+	l = FLD_MOD(l, 0, 1, 1);
+
+	rfbi_write_reg(RFBI_CONTROL, l);
+
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
+	/*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
+	/*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
+
+	l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
+	l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
+	l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
+
+	l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
+	rfbi_write_reg(RFBI_CONFIG(0), l);
+
+	rfbi_enable_clocks(0);
+}
+#endif
+
+int rfbi_configure(int rfbi_module, int bpp, int lines)
+{
+	u32 l;
+	int cycle1 = 0, cycle2 = 0, cycle3 = 0;
+	enum omap_rfbi_cycleformat cycleformat;
+	enum omap_rfbi_datatype datatype;
+	enum omap_rfbi_parallelmode parallelmode;
+
+	switch (bpp) {
+	case 12:
+		datatype = OMAP_DSS_RFBI_DATATYPE_12;
+		break;
+	case 16:
+		datatype = OMAP_DSS_RFBI_DATATYPE_16;
+		break;
+	case 18:
+		datatype = OMAP_DSS_RFBI_DATATYPE_18;
+		break;
+	case 24:
+		datatype = OMAP_DSS_RFBI_DATATYPE_24;
+		break;
+	default:
+		BUG();
+		return 1;
+	}
+	rfbi.datatype = datatype;
+
+	switch (lines) {
+	case 8:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8;
+		break;
+	case 9:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9;
+		break;
+	case 12:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12;
+		break;
+	case 16:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16;
+		break;
+	default:
+		BUG();
+		return 1;
+	}
+	rfbi.parallelmode = parallelmode;
+
+	if ((bpp % lines) == 0) {
+		switch (bpp / lines) {
+		case 1:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1;
+			break;
+		case 2:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1;
+			break;
+		case 3:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1;
+			break;
+		default:
+			BUG();
+			return 1;
+		}
+	} else if ((2 * bpp % lines) == 0) {
+		if ((2 * bpp / lines) == 3)
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2;
+		else {
+			BUG();
+			return 1;
+		}
+	} else {
+		BUG();
+		return 1;
+	}
+
+	switch (cycleformat) {
+	case OMAP_DSS_RFBI_CYCLEFORMAT_1_1:
+		cycle1 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_2_1:
+		cycle1 = lines;
+		cycle2 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_3_1:
+		cycle1 = lines;
+		cycle2 = lines;
+		cycle3 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_3_2:
+		cycle1 = lines;
+		cycle2 = (lines / 2) | ((lines / 2) << 16);
+		cycle3 = (lines << 16);
+		break;
+	}
+
+	rfbi_enable_clocks(1);
+
+	REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */
+
+	l = 0;
+	l |= FLD_VAL(parallelmode, 1, 0);
+	l |= FLD_VAL(0, 3, 2);		/* TRIGGERMODE: ITE */
+	l |= FLD_VAL(0, 4, 4);		/* TIMEGRANULARITY */
+	l |= FLD_VAL(datatype, 6, 5);
+	/* l |= FLD_VAL(2, 8, 7); */	/* L4FORMAT, 2pix/L4 */
+	l |= FLD_VAL(0, 8, 7);	/* L4FORMAT, 1pix/L4 */
+	l |= FLD_VAL(cycleformat, 10, 9);
+	l |= FLD_VAL(0, 12, 11);	/* UNUSEDBITS */
+	l |= FLD_VAL(0, 16, 16);	/* A0POLARITY */
+	l |= FLD_VAL(0, 17, 17);	/* REPOLARITY */
+	l |= FLD_VAL(0, 18, 18);	/* WEPOLARITY */
+	l |= FLD_VAL(0, 19, 19);	/* CSPOLARITY */
+	l |= FLD_VAL(1, 20, 20);	/* TE_VSYNC_POLARITY */
+	l |= FLD_VAL(1, 21, 21);	/* HSYNCPOLARITY */
+	rfbi_write_reg(RFBI_CONFIG(rfbi_module), l);
+
+	rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1);
+	rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2);
+	rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3);
+
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+	l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */
+	l = FLD_MOD(l, 0, 1, 1); /* clear bypass */
+	rfbi_write_reg(RFBI_CONTROL, l);
+
+
+	DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n",
+	       bpp, lines, cycle1, cycle2, cycle3);
+
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(rfbi_configure);
+
+static int rfbi_find_display(struct omap_dss_device *dssdev)
+{
+	if (dssdev == rfbi.dssdev[0])
+		return 0;
+
+	if (dssdev == rfbi.dssdev[1])
+		return 1;
+
+	BUG();
+	return -1;
+}
+
+
+static void signal_fifo_waiters(void)
+{
+	if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
+		/* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
+		complete(&rfbi.cmd_done);
+		atomic_dec(&rfbi.cmd_fifo_full);
+	}
+}
+
+/* returns 1 for async op, and 0 for sync op */
+static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
+{
+	u16 x = upd->x;
+	u16 y = upd->y;
+	u16 w = upd->w;
+	u16 h = upd->h;
+
+	perf_mark_setup();
+
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		/*dssdev->driver->enable_te(dssdev, 1); */
+		dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+	}
+
+#ifdef MEASURE_PERF
+	rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
+#endif
+
+	dssdev->driver->setup_update(dssdev, x, y, w, h);
+
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		rfbi_transfer_area(w, h, NULL, NULL);
+		return 1;
+	} else {
+		struct omap_overlay *ovl;
+		void __iomem *addr;
+		int scr_width;
+
+		ovl = dssdev->manager->overlays[0];
+		scr_width = ovl->info.screen_width;
+		addr = ovl->info.vaddr;
+
+		omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
+
+		perf_show("L4");
+
+		return 0;
+	}
+}
+
+static void process_cmd_fifo(void)
+{
+	int len;
+	struct update_param p;
+	struct omap_dss_device *dssdev;
+	unsigned long flags;
+
+	if (atomic_inc_return(&rfbi.cmd_pending) != 1)
+		return;
+
+	while (true) {
+		spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+
+		len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
+				  sizeof(struct update_param));
+		if (len == 0) {
+			DSSDBG("nothing more in fifo\n");
+			atomic_set(&rfbi.cmd_pending, 0);
+			spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+			break;
+		}
+
+		/* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
+
+		spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+		BUG_ON(len != sizeof(struct update_param));
+		BUG_ON(p.rfbi_module > 1);
+
+		dssdev = rfbi.dssdev[p.rfbi_module];
+
+		if (p.cmd == RFBI_CMD_UPDATE) {
+			if (do_update(dssdev, &p.par.r))
+				break; /* async op */
+		} else if (p.cmd == RFBI_CMD_SYNC) {
+			DSSDBG("Signaling SYNC done!\n");
+			complete(p.par.sync);
+		} else
+			BUG();
+	}
+
+	signal_fifo_waiters();
+}
+
+static void rfbi_push_cmd(struct update_param *p)
+{
+	int ret;
+
+	while (1) {
+		unsigned long flags;
+		int available;
+
+		spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+		available = RFBI_CMD_FIFO_LEN_BYTES -
+			__kfifo_len(rfbi.cmd_fifo);
+
+/*		DSSDBG("%d bytes left in fifo\n", available); */
+		if (available < sizeof(struct update_param)) {
+			DSSDBG("Going to wait because FIFO FULL..\n");
+			spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+			atomic_inc(&rfbi.cmd_fifo_full);
+			wait_for_completion(&rfbi.cmd_done);
+			/*DSSDBG("Woke up because fifo not full anymore\n");*/
+			continue;
+		}
+
+		ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
+				  sizeof(struct update_param));
+/*		DSSDBG("pushed %d bytes\n", ret);*/
+
+		spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+		BUG_ON(ret != sizeof(struct update_param));
+
+		break;
+	}
+}
+
+static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
+{
+	struct update_param p;
+
+	p.rfbi_module = rfbi_module;
+	p.cmd = RFBI_CMD_UPDATE;
+
+	p.par.r.x = x;
+	p.par.r.y = y;
+	p.par.r.w = w;
+	p.par.r.h = h;
+
+	DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
+
+	rfbi_push_cmd(&p);
+
+	process_cmd_fifo();
+}
+
+static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
+{
+	struct update_param p;
+
+	p.rfbi_module = rfbi_module;
+	p.cmd = RFBI_CMD_SYNC;
+	p.par.sync = sync_comp;
+
+	rfbi_push_cmd(&p);
+
+	DSSDBG("RFBI sync pushed to cmd fifo\n");
+
+	process_cmd_fifo();
+}
+
+void rfbi_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	DUMPREG(RFBI_REVISION);
+	DUMPREG(RFBI_SYSCONFIG);
+	DUMPREG(RFBI_SYSSTATUS);
+	DUMPREG(RFBI_CONTROL);
+	DUMPREG(RFBI_PIXEL_CNT);
+	DUMPREG(RFBI_LINE_NUMBER);
+	DUMPREG(RFBI_CMD);
+	DUMPREG(RFBI_PARAM);
+	DUMPREG(RFBI_DATA);
+	DUMPREG(RFBI_READ);
+	DUMPREG(RFBI_STATUS);
+
+	DUMPREG(RFBI_CONFIG(0));
+	DUMPREG(RFBI_ONOFF_TIME(0));
+	DUMPREG(RFBI_CYCLE_TIME(0));
+	DUMPREG(RFBI_DATA_CYCLE1(0));
+	DUMPREG(RFBI_DATA_CYCLE2(0));
+	DUMPREG(RFBI_DATA_CYCLE3(0));
+
+	DUMPREG(RFBI_CONFIG(1));
+	DUMPREG(RFBI_ONOFF_TIME(1));
+	DUMPREG(RFBI_CYCLE_TIME(1));
+	DUMPREG(RFBI_DATA_CYCLE1(1));
+	DUMPREG(RFBI_DATA_CYCLE2(1));
+	DUMPREG(RFBI_DATA_CYCLE3(1));
+
+	DUMPREG(RFBI_VSYNC_WIDTH);
+	DUMPREG(RFBI_HSYNC_WIDTH);
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+int rfbi_init(void)
+{
+	u32 rev;
+	u32 l;
+
+	spin_lock_init(&rfbi.cmd_lock);
+	rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
+				    &rfbi.cmd_lock);
+	if (IS_ERR(rfbi.cmd_fifo))
+		return -ENOMEM;
+
+	init_completion(&rfbi.cmd_done);
+	atomic_set(&rfbi.cmd_fifo_full, 0);
+	atomic_set(&rfbi.cmd_pending, 0);
+
+	rfbi.base = ioremap(RFBI_BASE, SZ_256);
+	if (!rfbi.base) {
+		DSSERR("can't ioremap RFBI\n");
+		return -ENOMEM;
+	}
+
+	rfbi_enable_clocks(1);
+
+	msleep(10);
+
+	rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+	/* Enable autoidle and smart-idle */
+	l = rfbi_read_reg(RFBI_SYSCONFIG);
+	l |= (1 << 0) | (2 << 3);
+	rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+	rev = rfbi_read_reg(RFBI_REVISION);
+	printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+
+void rfbi_exit(void)
+{
+	DSSDBG("rfbi_exit\n");
+
+	kfifo_free(rfbi.cmd_fifo);
+
+	iounmap(rfbi.base);
+}
+
+/* struct omap_display support */
+static int rfbi_display_update(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h)
+{
+	int rfbi_module;
+
+	if (w == 0 || h == 0)
+		return 0;
+
+	rfbi_module = rfbi_find_display(dssdev);
+
+	rfbi_push_update(rfbi_module, x, y, w, h);
+
+	return 0;
+}
+
+static int rfbi_display_sync(struct omap_dss_device *dssdev)
+{
+	struct completion sync_comp;
+	int rfbi_module;
+
+	rfbi_module = rfbi_find_display(dssdev);
+
+	init_completion(&sync_comp);
+	rfbi_push_sync(rfbi_module, &sync_comp);
+	DSSDBG("Waiting for SYNC to happen...\n");
+	wait_for_completion(&sync_comp);
+	DSSDBG("Released from SYNC\n");
+	return 0;
+}
+
+static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	dssdev->driver->enable_te(dssdev, enable);
+	return 0;
+}
+
+static int rfbi_display_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omap_dss_start_device(dssdev);
+	if (r) {
+		DSSERR("failed to start device\n");
+		goto err0;
+	}
+
+	r = omap_dispc_register_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+	if (r) {
+		DSSERR("can't get FRAMEDONE irq\n");
+		goto err1;
+	}
+
+	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
+
+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI);
+
+	dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
+
+	rfbi_configure(dssdev->phy.rfbi.channel,
+			       dssdev->ctrl.pixel_size,
+			       dssdev->phy.rfbi.data_lines);
+
+	rfbi_set_timings(dssdev->phy.rfbi.channel,
+			 &dssdev->ctrl.rfbi_timings);
+
+
+	if (dssdev->driver->enable) {
+		r = dssdev->driver->enable(dssdev);
+		if (r)
+			goto err2;
+	}
+
+	return 0;
+err2:
+	omap_dispc_unregister_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+err1:
+	omap_dss_stop_device(dssdev);
+err0:
+	return r;
+}
+
+static void rfbi_display_disable(struct omap_dss_device *dssdev)
+{
+	dssdev->driver->disable(dssdev);
+	omap_dispc_unregister_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+	omap_dss_stop_device(dssdev);
+}
+
+int rfbi_init_display(struct omap_dss_device *dssdev)
+{
+	dssdev->enable = rfbi_display_enable;
+	dssdev->disable = rfbi_display_disable;
+	dssdev->update = rfbi_display_update;
+	dssdev->sync = rfbi_display_sync;
+	dssdev->enable_te = rfbi_display_enable_te;
+
+	rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
+
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+
+	return 0;
+}
--- /dev/null
+++ b/drivers/video/omap2/dss/sdi.c
@@ -0,0 +1,261 @@
+/*
+ * linux/drivers/video/omap2/dss/sdi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "SDI"
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/board.h>
+#include <mach/display.h>
+#include "dss.h"
+
+static struct {
+	bool skip_init;
+	bool update_enabled;
+} sdi;
+
+static void sdi_basic_init(void)
+{
+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
+
+	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
+	dispc_set_tft_data_lines(24);
+	dispc_lcd_enable_signal_polarity(1);
+}
+
+static int sdi_display_enable(struct omap_dss_device *dssdev)
+{
+	struct omap_video_timings *t = &dssdev->panel.timings;
+	struct dispc_clock_info cinfo;
+	u16 lck_div, pck_div;
+	unsigned long fck;
+	unsigned long pck;
+	int r;
+
+	r = omap_dss_start_device(dssdev);
+	if (r) {
+		DSSERR("failed to start device\n");
+		goto err0;
+	}
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		DSSERR("dssdev already enabled\n");
+		r = -EINVAL;
+		goto err1;
+	}
+
+	/* In case of skip_init sdi_init has already enabled the clocks */
+	if (!sdi.skip_init)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	sdi_basic_init();
+
+	/* 15.5.9.1.2 */
+	dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
+
+	dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi,
+			dssdev->panel.acb);
+
+	if (!sdi.skip_init)
+		r = dispc_calc_clock_div(1, t->pixel_clock * 1000,
+				&cinfo);
+	else
+		r = dispc_get_clock_div(&cinfo);
+
+	if (r)
+		goto err2;
+
+	fck = cinfo.fck;
+	lck_div = cinfo.lck_div;
+	pck_div = cinfo.pck_div;
+
+	pck = fck / lck_div / pck_div / 1000;
+
+	if (pck != t->pixel_clock) {
+		DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
+				"got %lu kHz\n",
+				t->pixel_clock, pck);
+
+		t->pixel_clock = pck;
+	}
+
+
+	dispc_set_lcd_timings(t);
+
+	r = dispc_set_clock_div(&cinfo);
+	if (r)
+		goto err2;
+
+	if (!sdi.skip_init) {
+		dss_sdi_init(dssdev->phy.sdi.datapairs);
+		dss_sdi_enable();
+		mdelay(2);
+	}
+
+	dispc_enable_lcd_out(1);
+
+	if (dssdev->driver->enable) {
+		r = dssdev->driver->enable(dssdev);
+		if (r)
+			goto err3;
+	}
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	sdi.skip_init = 0;
+
+	return 0;
+err3:
+	dispc_enable_lcd_out(0);
+err2:
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+err1:
+	omap_dss_stop_device(dssdev);
+err0:
+	return r;
+}
+
+static int sdi_display_resume(struct omap_dss_device *dssdev);
+
+static void sdi_display_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
+		return;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+		sdi_display_resume(dssdev);
+
+	if (dssdev->driver->disable)
+		dssdev->driver->disable(dssdev);
+
+	dispc_enable_lcd_out(0);
+
+	dss_sdi_disable();
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	omap_dss_stop_device(dssdev);
+}
+
+static int sdi_display_suspend(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return -EINVAL;
+
+	if (dssdev->driver->suspend)
+		dssdev->driver->suspend(dssdev);
+
+	dispc_enable_lcd_out(0);
+
+	dss_sdi_disable();
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+	return 0;
+}
+
+static int sdi_display_resume(struct omap_dss_device *dssdev)
+{
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
+		return -EINVAL;
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	dss_sdi_enable();
+	mdelay(2);
+
+	dispc_enable_lcd_out(1);
+
+	if (dssdev->driver->resume)
+		dssdev->driver->resume(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static int sdi_display_set_update_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_update_mode mode)
+{
+	if (mode == OMAP_DSS_UPDATE_MANUAL)
+		return -EINVAL;
+
+	if (mode == OMAP_DSS_UPDATE_DISABLED) {
+		dispc_enable_lcd_out(0);
+		sdi.update_enabled = 0;
+	} else {
+		dispc_enable_lcd_out(1);
+		sdi.update_enabled = 1;
+	}
+
+	return 0;
+}
+
+static enum omap_dss_update_mode sdi_display_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
+		OMAP_DSS_UPDATE_DISABLED;
+}
+
+static void sdi_get_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+int sdi_init_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("SDI init\n");
+
+	dssdev->enable = sdi_display_enable;
+	dssdev->disable = sdi_display_disable;
+	dssdev->suspend = sdi_display_suspend;
+	dssdev->resume = sdi_display_resume;
+	dssdev->set_update_mode = sdi_display_set_update_mode;
+	dssdev->get_update_mode = sdi_display_get_update_mode;
+	dssdev->get_timings = sdi_get_timings;
+
+	return 0;
+}
+
+int sdi_init(bool skip_init)
+{
+	/* we store this for first display enable, then clear it */
+	sdi.skip_init = skip_init;
+
+	/*
+	 * Enable clocks already here, otherwise there would be a toggle
+	 * of them until sdi_display_enable is called.
+	 */
+	if (skip_init)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	return 0;
+}
+
+void sdi_exit(void)
+{
+}
--- /dev/null
+++ b/drivers/video/omap2/dss/venc.c
@@ -0,0 +1,797 @@
+/*
+ * linux/drivers/video/omap2/dss/venc.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * VENC settings from TI's DSS driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "VENC"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <mach/display.h>
+#include <mach/cpu.h>
+
+#include "dss.h"
+
+#define VENC_BASE	0x48050C00
+
+/* Venc registers */
+#define VENC_REV_ID				0x00
+#define VENC_STATUS				0x04
+#define VENC_F_CONTROL				0x08
+#define VENC_VIDOUT_CTRL			0x10
+#define VENC_SYNC_CTRL				0x14
+#define VENC_LLEN				0x1C
+#define VENC_FLENS				0x20
+#define VENC_HFLTR_CTRL				0x24
+#define VENC_CC_CARR_WSS_CARR			0x28
+#define VENC_C_PHASE				0x2C
+#define VENC_GAIN_U				0x30
+#define VENC_GAIN_V				0x34
+#define VENC_GAIN_Y				0x38
+#define VENC_BLACK_LEVEL			0x3C
+#define VENC_BLANK_LEVEL			0x40
+#define VENC_X_COLOR				0x44
+#define VENC_M_CONTROL				0x48
+#define VENC_BSTAMP_WSS_DATA			0x4C
+#define VENC_S_CARR				0x50
+#define VENC_LINE21				0x54
+#define VENC_LN_SEL				0x58
+#define VENC_L21__WC_CTL			0x5C
+#define VENC_HTRIGGER_VTRIGGER			0x60
+#define VENC_SAVID__EAVID			0x64
+#define VENC_FLEN__FAL				0x68
+#define VENC_LAL__PHASE_RESET			0x6C
+#define VENC_HS_INT_START_STOP_X		0x70
+#define VENC_HS_EXT_START_STOP_X		0x74
+#define VENC_VS_INT_START_X			0x78
+#define VENC_VS_INT_STOP_X__VS_INT_START_Y	0x7C
+#define VENC_VS_INT_STOP_Y__VS_EXT_START_X	0x80
+#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y	0x84
+#define VENC_VS_EXT_STOP_Y			0x88
+#define VENC_AVID_START_STOP_X			0x90
+#define VENC_AVID_START_STOP_Y			0x94
+#define VENC_FID_INT_START_X__FID_INT_START_Y	0xA0
+#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X	0xA4
+#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y	0xA8
+#define VENC_TVDETGP_INT_START_STOP_X		0xB0
+#define VENC_TVDETGP_INT_START_STOP_Y		0xB4
+#define VENC_GEN_CTRL				0xB8
+#define VENC_OUTPUT_CONTROL			0xC4
+#define VENC_OUTPUT_TEST			0xC8
+#define VENC_DAC_B__DAC_C			0xC8
+
+struct venc_config {
+	u32 f_control;
+	u32 vidout_ctrl;
+	u32 sync_ctrl;
+	u32 llen;
+	u32 flens;
+	u32 hfltr_ctrl;
+	u32 cc_carr_wss_carr;
+	u32 c_phase;
+	u32 gain_u;
+	u32 gain_v;
+	u32 gain_y;
+	u32 black_level;
+	u32 blank_level;
+	u32 x_color;
+	u32 m_control;
+	u32 bstamp_wss_data;
+	u32 s_carr;
+	u32 line21;
+	u32 ln_sel;
+	u32 l21__wc_ctl;
+	u32 htrigger_vtrigger;
+	u32 savid__eavid;
+	u32 flen__fal;
+	u32 lal__phase_reset;
+	u32 hs_int_start_stop_x;
+	u32 hs_ext_start_stop_x;
+	u32 vs_int_start_x;
+	u32 vs_int_stop_x__vs_int_start_y;
+	u32 vs_int_stop_y__vs_ext_start_x;
+	u32 vs_ext_stop_x__vs_ext_start_y;
+	u32 vs_ext_stop_y;
+	u32 avid_start_stop_x;
+	u32 avid_start_stop_y;
+	u32 fid_int_start_x__fid_int_start_y;
+	u32 fid_int_offset_y__fid_ext_start_x;
+	u32 fid_ext_start_y__fid_ext_offset_y;
+	u32 tvdetgp_int_start_stop_x;
+	u32 tvdetgp_int_start_stop_y;
+	u32 gen_ctrl;
+};
+
+/* from TRM */
+static const struct venc_config venc_config_pal_trm = {
+	.f_control				= 0,
+	.vidout_ctrl				= 1,
+	.sync_ctrl				= 0x40,
+	.llen					= 0x35F, /* 863 */
+	.flens					= 0x270, /* 624 */
+	.hfltr_ctrl				= 0,
+	.cc_carr_wss_carr			= 0x2F7225ED,
+	.c_phase				= 0,
+	.gain_u					= 0x111,
+	.gain_v					= 0x181,
+	.gain_y					= 0x140,
+	.black_level				= 0x3B,
+	.blank_level				= 0x3B,
+	.x_color				= 0x7,
+	.m_control				= 0x2,
+	.bstamp_wss_data			= 0x3F,
+	.s_carr					= 0x2A098ACB,
+	.line21					= 0,
+	.ln_sel					= 0x01290015,
+	.l21__wc_ctl				= 0x0000F603,
+	.htrigger_vtrigger			= 0,
+
+	.savid__eavid				= 0x06A70108,
+	.flen__fal				= 0x00180270,
+	.lal__phase_reset			= 0x00040135,
+	.hs_int_start_stop_x			= 0x00880358,
+	.hs_ext_start_stop_x			= 0x000F035F,
+	.vs_int_start_x				= 0x01A70000,
+	.vs_int_stop_x__vs_int_start_y		= 0x000001A7,
+	.vs_int_stop_y__vs_ext_start_x		= 0x01AF0000,
+	.vs_ext_stop_x__vs_ext_start_y		= 0x000101AF,
+	.vs_ext_stop_y				= 0x00000025,
+	.avid_start_stop_x			= 0x03530083,
+	.avid_start_stop_y			= 0x026C002E,
+	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
+	.fid_int_offset_y__fid_ext_start_x	= 0x002E0138,
+	.fid_ext_start_y__fid_ext_offset_y	= 0x01380001,
+
+	.tvdetgp_int_start_stop_x		= 0x00140001,
+	.tvdetgp_int_start_stop_y		= 0x00010001,
+	.gen_ctrl				= 0x00FF0000,
+};
+
+/* from TRM */
+static const struct venc_config venc_config_ntsc_trm = {
+	.f_control				= 0,
+	.vidout_ctrl				= 1,
+	.sync_ctrl				= 0x8040,
+	.llen					= 0x359,
+	.flens					= 0x20C,
+	.hfltr_ctrl				= 0,
+	.cc_carr_wss_carr			= 0x043F2631,
+	.c_phase				= 0,
+	.gain_u					= 0x102,
+	.gain_v					= 0x16C,
+	.gain_y					= 0x12F,
+	.black_level				= 0x43,
+	.blank_level				= 0x38,
+	.x_color				= 0x7,
+	.m_control				= 0x1,
+	.bstamp_wss_data			= 0x38,
+	.s_carr					= 0x21F07C1F,
+	.line21					= 0,
+	.ln_sel					= 0x01310011,
+	.l21__wc_ctl				= 0x0000F003,
+	.htrigger_vtrigger			= 0,
+
+	.savid__eavid				= 0x069300F4,
+	.flen__fal				= 0x0016020C,
+	.lal__phase_reset			= 0x00060107,
+	.hs_int_start_stop_x			= 0x008E0350,
+	.hs_ext_start_stop_x			= 0x000F0359,
+	.vs_int_start_x				= 0x01A00000,
+	.vs_int_stop_x__vs_int_start_y		= 0x020701A0,
+	.vs_int_stop_y__vs_ext_start_x		= 0x01AC0024,
+	.vs_ext_stop_x__vs_ext_start_y		= 0x020D01AC,
+	.vs_ext_stop_y				= 0x00000006,
+	.avid_start_stop_x			= 0x03480078,
+	.avid_start_stop_y			= 0x02060024,
+	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
+	.fid_int_offset_y__fid_ext_start_x	= 0x01AC0106,
+	.fid_ext_start_y__fid_ext_offset_y	= 0x01060006,
+
+	.tvdetgp_int_start_stop_x		= 0x00140001,
+	.tvdetgp_int_start_stop_y		= 0x00010001,
+	.gen_ctrl				= 0x00F90000,
+};
+
+static const struct venc_config venc_config_pal_bdghi = {
+	.f_control				= 0,
+	.vidout_ctrl				= 0,
+	.sync_ctrl				= 0,
+	.hfltr_ctrl				= 0,
+	.x_color				= 0,
+	.line21					= 0,
+	.ln_sel					= 21,
+	.htrigger_vtrigger			= 0,
+	.tvdetgp_int_start_stop_x		= 0x00140001,
+	.tvdetgp_int_start_stop_y		= 0x00010001,
+	.gen_ctrl				= 0x00FB0000,
+
+	.llen					= 864-1,
+	.flens					= 625-1,
+	.cc_carr_wss_carr			= 0x2F7625ED,
+	.c_phase				= 0xDF,
+	.gain_u					= 0x111,
+	.gain_v					= 0x181,
+	.gain_y					= 0x140,
+	.black_level				= 0x3e,
+	.blank_level				= 0x3e,
+	.m_control				= 0<<2 | 1<<1,
+	.bstamp_wss_data			= 0x42,
+	.s_carr					= 0x2a098acb,
+	.l21__wc_ctl				= 0<<13 | 0x16<<8 | 0<<0,
+	.savid__eavid				= 0x06A70108,
+	.flen__fal				= 23<<16 | 624<<0,
+	.lal__phase_reset			= 2<<17 | 310<<0,
+	.hs_int_start_stop_x			= 0x00920358,
+	.hs_ext_start_stop_x			= 0x000F035F,
+	.vs_int_start_x				= 0x1a7<<16,
+	.vs_int_stop_x__vs_int_start_y		= 0x000601A7,
+	.vs_int_stop_y__vs_ext_start_x		= 0x01AF0036,
+	.vs_ext_stop_x__vs_ext_start_y		= 0x27101af,
+	.vs_ext_stop_y				= 0x05,
+	.avid_start_stop_x			= 0x03530082,
+	.avid_start_stop_y			= 0x0270002E,
+	.fid_int_start_x__fid_int_start_y	= 0x0005008A,
+	.fid_int_offset_y__fid_ext_start_x	= 0x002E0138,
+	.fid_ext_start_y__fid_ext_offset_y	= 0x01380005,
+};
+
+const struct omap_video_timings omap_dss_pal_timings = {
+	.x_res		= 720,
+	.y_res		= 574,
+	.pixel_clock	= 13500,
+	.hsw		= 64,
+	.hfp		= 12,
+	.hbp		= 68,
+	.vsw		= 5,
+	.vfp		= 5,
+	.vbp		= 41,
+};
+EXPORT_SYMBOL(omap_dss_pal_timings);
+
+const struct omap_video_timings omap_dss_ntsc_timings = {
+	.x_res		= 720,
+	.y_res		= 482,
+	.pixel_clock	= 13500,
+	.hsw		= 64,
+	.hfp		= 16,
+	.hbp		= 58,
+	.vsw		= 6,
+	.vfp		= 6,
+	.vbp		= 31,
+};
+EXPORT_SYMBOL(omap_dss_ntsc_timings);
+
+static struct {
+	void __iomem *base;
+	struct mutex venc_lock;
+	u32 wss_data;
+	struct regulator *vdda_dac_reg;
+} venc;
+
+static inline void venc_write_reg(int idx, u32 val)
+{
+	__raw_writel(val, venc.base + idx);
+}
+
+static inline u32 venc_read_reg(int idx)
+{
+	u32 l = __raw_readl(venc.base + idx);
+	return l;
+}
+
+static void venc_write_config(const struct venc_config *config)
+{
+	DSSDBG("write venc conf\n");
+
+	venc_write_reg(VENC_LLEN, config->llen);
+	venc_write_reg(VENC_FLENS, config->flens);
+	venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr);
+	venc_write_reg(VENC_C_PHASE, config->c_phase);
+	venc_write_reg(VENC_GAIN_U, config->gain_u);
+	venc_write_reg(VENC_GAIN_V, config->gain_v);
+	venc_write_reg(VENC_GAIN_Y, config->gain_y);
+	venc_write_reg(VENC_BLACK_LEVEL, config->black_level);
+	venc_write_reg(VENC_BLANK_LEVEL, config->blank_level);
+	venc_write_reg(VENC_M_CONTROL, config->m_control);
+	venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
+			venc.wss_data);
+	venc_write_reg(VENC_S_CARR, config->s_carr);
+	venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl);
+	venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid);
+	venc_write_reg(VENC_FLEN__FAL, config->flen__fal);
+	venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset);
+	venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x);
+	venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x);
+	venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x);
+	venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y,
+		       config->vs_int_stop_x__vs_int_start_y);
+	venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X,
+		       config->vs_int_stop_y__vs_ext_start_x);
+	venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y,
+		       config->vs_ext_stop_x__vs_ext_start_y);
+	venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y);
+	venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x);
+	venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y);
+	venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y,
+		       config->fid_int_start_x__fid_int_start_y);
+	venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X,
+		       config->fid_int_offset_y__fid_ext_start_x);
+	venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y,
+		       config->fid_ext_start_y__fid_ext_offset_y);
+
+	venc_write_reg(VENC_DAC_B__DAC_C,  venc_read_reg(VENC_DAC_B__DAC_C));
+	venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl);
+	venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl);
+	venc_write_reg(VENC_X_COLOR, config->x_color);
+	venc_write_reg(VENC_LINE21, config->line21);
+	venc_write_reg(VENC_LN_SEL, config->ln_sel);
+	venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger);
+	venc_write_reg(VENC_TVDETGP_INT_START_STOP_X,
+		       config->tvdetgp_int_start_stop_x);
+	venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y,
+		       config->tvdetgp_int_start_stop_y);
+	venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl);
+	venc_write_reg(VENC_F_CONTROL, config->f_control);
+	venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl);
+}
+
+static void venc_reset(void)
+{
+	int t = 1000;
+
+	venc_write_reg(VENC_F_CONTROL, 1<<8);
+	while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) {
+		if (--t == 0) {
+			DSSERR("Failed to reset venc\n");
+			return;
+		}
+	}
+
+	/* the magical sleep that makes things work */
+	msleep(20);
+}
+
+static void venc_enable_clocks(int enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M |
+				DSS_CLK_96M);
+	else
+		dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M |
+				DSS_CLK_96M);
+}
+
+static const struct venc_config *venc_timings_to_config(
+		struct omap_video_timings *timings)
+{
+	if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
+		return &venc_config_pal_trm;
+
+	if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
+		return &venc_config_ntsc_trm;
+
+	BUG();
+}
+
+
+
+
+
+/* driver */
+static int venc_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.timings = omap_dss_pal_timings;
+
+	return 0;
+}
+
+static void venc_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int venc_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (dssdev->platform_enable)
+		r = dssdev->platform_enable(dssdev);
+
+	return r;
+}
+
+static void venc_panel_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+}
+
+static int venc_panel_suspend(struct omap_dss_device *dssdev)
+{
+	venc_panel_disable(dssdev);
+	return 0;
+}
+
+static int venc_panel_resume(struct omap_dss_device *dssdev)
+{
+	return venc_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver venc_driver = {
+	.probe		= venc_panel_probe,
+	.remove		= venc_panel_remove,
+
+	.enable		= venc_panel_enable,
+	.disable	= venc_panel_disable,
+	.suspend	= venc_panel_suspend,
+	.resume		= venc_panel_resume,
+
+	.driver         = {
+		.name   = "venc",
+		.owner  = THIS_MODULE,
+	},
+};
+/* driver end */
+
+
+
+int venc_init(struct platform_device *pdev)
+{
+	u8 rev_id;
+
+	mutex_init(&venc.venc_lock);
+
+	venc.wss_data = 0;
+
+	venc.base = ioremap(VENC_BASE, SZ_1K);
+	if (!venc.base) {
+		DSSERR("can't ioremap VENC\n");
+		return -ENOMEM;
+	}
+
+	venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac");
+	if (IS_ERR(venc.vdda_dac_reg)) {
+		iounmap(venc.base);
+		DSSERR("can't get VDDA_DAC regulator\n");
+		return PTR_ERR(venc.vdda_dac_reg);
+	}
+
+	venc_enable_clocks(1);
+
+	rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
+	printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
+
+	venc_enable_clocks(0);
+
+	return omap_dss_register_driver(&venc_driver);
+}
+
+void venc_exit(void)
+{
+	omap_dss_unregister_driver(&venc_driver);
+
+	regulator_put(venc.vdda_dac_reg);
+
+	iounmap(venc.base);
+}
+
+static void venc_power_on(struct omap_dss_device *dssdev)
+{
+	u32 l;
+
+	venc_enable_clocks(1);
+
+	venc_reset();
+	venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
+
+	dss_set_venc_output(dssdev->phy.venc.type);
+	dss_set_dac_pwrdn_bgz(1);
+
+	l = 0;
+
+	if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE)
+		l |= 1 << 1;
+	else /* S-Video */
+		l |= (1 << 0) | (1 << 2);
+
+	if (dssdev->phy.venc.invert_polarity == false)
+		l |= 1 << 3;
+
+	venc_write_reg(VENC_OUTPUT_CONTROL, l);
+
+	dispc_set_digit_size(dssdev->panel.timings.x_res,
+			dssdev->panel.timings.y_res/2);
+
+	regulator_enable(venc.vdda_dac_reg);
+
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
+
+	dispc_enable_digit_out(1);
+}
+
+static void venc_power_off(struct omap_dss_device *dssdev)
+{
+	venc_write_reg(VENC_OUTPUT_CONTROL, 0);
+	dss_set_dac_pwrdn_bgz(0);
+
+	dispc_enable_digit_out(0);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	regulator_disable(venc.vdda_dac_reg);
+
+	venc_enable_clocks(0);
+}
+
+static int venc_enable_display(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("venc_enable_display\n");
+
+	mutex_lock(&venc.venc_lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	venc_power_on(dssdev);
+
+	venc.wss_data = 0;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+err:
+	mutex_unlock(&venc.venc_lock);
+
+	return r;
+}
+
+static void venc_disable_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("venc_disable_display\n");
+
+	mutex_lock(&venc.venc_lock);
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
+		goto end;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) {
+		/* suspended is the same as disabled with venc */
+		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+		goto end;
+	}
+
+	venc_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+end:
+	mutex_unlock(&venc.venc_lock);
+}
+
+static int venc_display_suspend(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("venc_display_suspend\n");
+
+	mutex_lock(&venc.venc_lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	venc_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+err:
+	mutex_unlock(&venc.venc_lock);
+
+	return r;
+}
+
+static int venc_display_resume(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	DSSDBG("venc_display_resume\n");
+
+	mutex_lock(&venc.venc_lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	venc_power_on(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+err:
+	mutex_unlock(&venc.venc_lock);
+
+	return r;
+}
+
+static void venc_get_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static void venc_set_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	DSSDBG("venc_set_timings\n");
+
+	/* Reset WSS data when the TV standard changes. */
+	if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings)))
+		venc.wss_data = 0;
+
+	dssdev->panel.timings = *timings;
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		/* turn the venc off and on to get new timings to use */
+		venc_disable_display(dssdev);
+		venc_enable_display(dssdev);
+	}
+}
+
+static int venc_check_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	DSSDBG("venc_check_timings\n");
+
+	if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
+		return 0;
+
+	if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
+		return 0;
+
+	return -EINVAL;
+}
+
+static u32 venc_get_wss(struct omap_dss_device *dssdev)
+{
+	/* Invert due to VENC_L21_WC_CTL:INV=1 */
+	return (venc.wss_data >> 8) ^ 0xfffff;
+}
+
+static int venc_set_wss(struct omap_dss_device *dssdev,	u32 wss)
+{
+	const struct venc_config *config;
+
+	DSSDBG("venc_set_wss\n");
+
+	mutex_lock(&venc.venc_lock);
+
+	config = venc_timings_to_config(&dssdev->panel.timings);
+
+	/* Invert due to VENC_L21_WC_CTL:INV=1 */
+	venc.wss_data = (wss ^ 0xfffff) << 8;
+
+	venc_enable_clocks(1);
+
+	venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
+			venc.wss_data);
+
+	venc_enable_clocks(0);
+
+	mutex_unlock(&venc.venc_lock);
+
+	return 0;
+}
+
+static enum omap_dss_update_mode venc_display_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return OMAP_DSS_UPDATE_AUTO;
+	else
+		return OMAP_DSS_UPDATE_DISABLED;
+}
+
+int venc_init_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("init_display\n");
+
+	dssdev->enable = venc_enable_display;
+	dssdev->disable = venc_disable_display;
+	dssdev->suspend = venc_display_suspend;
+	dssdev->resume = venc_display_resume;
+	dssdev->get_timings = venc_get_timings;
+	dssdev->set_timings = venc_set_timings;
+	dssdev->check_timings = venc_check_timings;
+	dssdev->get_wss = venc_get_wss;
+	dssdev->set_wss = venc_set_wss;
+	dssdev->get_update_mode = venc_display_get_update_mode;
+
+	return 0;
+}
+
+void venc_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
+
+	venc_enable_clocks(1);
+
+	DUMPREG(VENC_F_CONTROL);
+	DUMPREG(VENC_VIDOUT_CTRL);
+	DUMPREG(VENC_SYNC_CTRL);
+	DUMPREG(VENC_LLEN);
+	DUMPREG(VENC_FLENS);
+	DUMPREG(VENC_HFLTR_CTRL);
+	DUMPREG(VENC_CC_CARR_WSS_CARR);
+	DUMPREG(VENC_C_PHASE);
+	DUMPREG(VENC_GAIN_U);
+	DUMPREG(VENC_GAIN_V);
+	DUMPREG(VENC_GAIN_Y);
+	DUMPREG(VENC_BLACK_LEVEL);
+	DUMPREG(VENC_BLANK_LEVEL);
+	DUMPREG(VENC_X_COLOR);
+	DUMPREG(VENC_M_CONTROL);
+	DUMPREG(VENC_BSTAMP_WSS_DATA);
+	DUMPREG(VENC_S_CARR);
+	DUMPREG(VENC_LINE21);
+	DUMPREG(VENC_LN_SEL);
+	DUMPREG(VENC_L21__WC_CTL);
+	DUMPREG(VENC_HTRIGGER_VTRIGGER);
+	DUMPREG(VENC_SAVID__EAVID);
+	DUMPREG(VENC_FLEN__FAL);
+	DUMPREG(VENC_LAL__PHASE_RESET);
+	DUMPREG(VENC_HS_INT_START_STOP_X);
+	DUMPREG(VENC_HS_EXT_START_STOP_X);
+	DUMPREG(VENC_VS_INT_START_X);
+	DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y);
+	DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X);
+	DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y);
+	DUMPREG(VENC_VS_EXT_STOP_Y);
+	DUMPREG(VENC_AVID_START_STOP_X);
+	DUMPREG(VENC_AVID_START_STOP_Y);
+	DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y);
+	DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X);
+	DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y);
+	DUMPREG(VENC_TVDETGP_INT_START_STOP_X);
+	DUMPREG(VENC_TVDETGP_INT_START_STOP_Y);
+	DUMPREG(VENC_GEN_CTRL);
+	DUMPREG(VENC_OUTPUT_CONTROL);
+	DUMPREG(VENC_OUTPUT_TEST);
+
+	venc_enable_clocks(0);
+
+#undef DUMPREG
+}
--- /dev/null
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -0,0 +1,37 @@
+menuconfig FB_OMAP2
+        tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)"
+        depends on FB && OMAP2_DSS
+
+	select OMAP2_VRAM
+	select OMAP2_VRFB
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          Frame buffer driver for OMAP2/3 based boards.
+
+config FB_OMAP2_DEBUG_SUPPORT
+	bool "Debug support for OMAP2/3 FB"
+	default y
+	depends on FB_OMAP2
+	help
+	  Support for debug output. You have to enable the actual printing
+	  with debug module parameter.
+
+config FB_OMAP2_FORCE_AUTO_UPDATE
+	bool "Force main display to automatic update mode"
+	depends on FB_OMAP2
+	help
+	  Forces main display to automatic update mode (if possible),
+	  and also enables tearsync (if possible). By default
+	  displays that support manual update are started in manual
+	  update mode.
+
+config FB_OMAP2_NUM_FBS
+	int "Number of framebuffers"
+	range 1 10
+	default 3
+	depends on FB_OMAP2
+	help
+	  Select the number of framebuffers created. OMAP2/3 has 3 overlays
+	  so normally this would be 3.
--- /dev/null
+++ b/drivers/video/omap2/omapfb/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_FB_OMAP2) += omapfb.o
+omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
--- /dev/null
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -0,0 +1,727 @@
+/*
+ * linux/drivers/video/omap2/omapfb-ioctl.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fb.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/mm.h>
+#include <linux/omapfb.h>
+#include <linux/vmalloc.h>
+
+#include <mach/display.h>
+#include <mach/vrfb.h>
+#include <mach/vram.h>
+
+#include "omapfb.h"
+
+static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_dss_device *display = fb2display(fbi);
+	struct omap_overlay *ovl;
+	struct omap_overlay_info info;
+	int r = 0;
+
+	DBG("omapfb_setup_plane\n");
+
+	if (ofbi->num_overlays != 1) {
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* XXX uses only the first overlay */
+	ovl = ofbi->overlays[0];
+
+	if (pi->enabled && !ofbi->region.size) {
+		/*
+		 * This plane's memory was freed, can't enable it
+		 * until it's reallocated.
+		 */
+		r = -EINVAL;
+		goto out;
+	}
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.pos_x = pi->pos_x;
+	info.pos_y = pi->pos_y;
+	info.out_width = pi->out_width;
+	info.out_height = pi->out_height;
+	info.enabled = pi->enabled;
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		goto out;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			goto out;
+	}
+
+	if (display) {
+		u16 w, h;
+
+		if (display->sync)
+			display->sync(display);
+
+		display->get_resolution(display, &w, &h);
+
+		if (display->update)
+			display->update(display, 0, 0, w, h);
+	}
+
+out:
+	if (r)
+		dev_err(fbdev->dev, "setup_plane failed\n");
+	return r;
+}
+
+static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	if (ofbi->num_overlays != 1) {
+		memset(pi, 0, sizeof(*pi));
+	} else {
+		struct omap_overlay_info *ovli;
+		struct omap_overlay *ovl;
+
+		ovl = ofbi->overlays[0];
+		ovli = &ovl->info;
+
+		pi->pos_x = ovli->pos_x;
+		pi->pos_y = ovli->pos_y;
+		pi->enabled = ovli->enabled;
+		pi->channel_out = 0; /* xxx */
+		pi->mirror = 0;
+		pi->out_width = ovli->out_width;
+		pi->out_height = ovli->out_height;
+	}
+
+	return 0;
+}
+
+static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
+	int r, i;
+	size_t size;
+
+	if (mi->type > OMAPFB_MEMTYPE_MAX)
+		return -EINVAL;
+
+	size = PAGE_ALIGN(mi->size);
+
+	rg = &ofbi->region;
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ofbi->overlays[i]->info.enabled)
+			return -EBUSY;
+	}
+
+	if (rg->size != size || rg->type != mi->type) {
+		r = omapfb_realloc_fbmem(fbi, size, mi->type);
+		if (r) {
+			dev_err(fbdev->dev, "realloc fbmem failed\n");
+			return r;
+		}
+	}
+
+	return 0;
+}
+
+static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_mem_region *rg;
+
+	rg = &ofbi->region;
+	memset(mi, 0, sizeof(*mi));
+
+	mi->size = rg->size;
+	mi->type = rg->type;
+
+	return 0;
+}
+
+static int omapfb_update_window(struct fb_info *fbi,
+		u32 x, u32 y, u32 w, u32 h)
+{
+	struct omap_dss_device *display = fb2display(fbi);
+	u16 dw, dh;
+
+	if (!display)
+		return 0;
+
+	if (w == 0 || h == 0)
+		return 0;
+
+	display->get_resolution(display, &dw, &dh);
+
+	if (x + w > dw || y + h > dh)
+		return -EINVAL;
+
+	display->update(display, x, y, w, h);
+
+	return 0;
+}
+
+static int omapfb_set_update_mode(struct fb_info *fbi,
+				   enum omapfb_update_mode mode)
+{
+	struct omap_dss_device *display = fb2display(fbi);
+	enum omap_dss_update_mode um;
+	int r;
+
+	if (!display || !display->set_update_mode)
+		return -EINVAL;
+
+	switch (mode) {
+	case OMAPFB_UPDATE_DISABLED:
+		um = OMAP_DSS_UPDATE_DISABLED;
+		break;
+
+	case OMAPFB_AUTO_UPDATE:
+		um = OMAP_DSS_UPDATE_AUTO;
+		break;
+
+	case OMAPFB_MANUAL_UPDATE:
+		um = OMAP_DSS_UPDATE_MANUAL;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	r = display->set_update_mode(display, um);
+
+	return r;
+}
+
+static int omapfb_get_update_mode(struct fb_info *fbi,
+		enum omapfb_update_mode *mode)
+{
+	struct omap_dss_device *display = fb2display(fbi);
+	enum omap_dss_update_mode m;
+
+	if (!display || !display->get_update_mode)
+		return -EINVAL;
+
+	m = display->get_update_mode(display);
+
+	switch (m) {
+	case OMAP_DSS_UPDATE_DISABLED:
+		*mode = OMAPFB_UPDATE_DISABLED;
+		break;
+	case OMAP_DSS_UPDATE_AUTO:
+		*mode = OMAPFB_AUTO_UPDATE;
+		break;
+	case OMAP_DSS_UPDATE_MANUAL:
+		*mode = OMAPFB_MANUAL_UPDATE;
+		break;
+	default:
+		BUG();
+	}
+
+	return 0;
+}
+
+/* XXX this color key handling is a hack... */
+static struct omapfb_color_key omapfb_color_keys[2];
+
+static int _omapfb_set_color_key(struct omap_overlay_manager *mgr,
+		struct omapfb_color_key *ck)
+{
+	struct omap_overlay_manager_info info;
+	enum omap_dss_trans_key_type kt;
+	int r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) {
+		info.trans_enabled = false;
+		omapfb_color_keys[mgr->id] = *ck;
+
+		r = mgr->set_manager_info(mgr, &info);
+		if (r)
+			return r;
+
+		r = mgr->apply(mgr);
+
+		return r;
+	}
+
+	switch (ck->key_type) {
+	case OMAPFB_COLOR_KEY_GFX_DST:
+		kt = OMAP_DSS_COLOR_KEY_GFX_DST;
+		break;
+	case OMAPFB_COLOR_KEY_VID_SRC:
+		kt = OMAP_DSS_COLOR_KEY_VID_SRC;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	info.default_color = ck->background;
+	info.trans_key = ck->trans_key;
+	info.trans_key_type = kt;
+	info.trans_enabled = true;
+
+	omapfb_color_keys[mgr->id] = *ck;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+
+	return r;
+}
+
+static int omapfb_set_color_key(struct fb_info *fbi,
+		struct omapfb_color_key *ck)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	int r;
+	int i;
+	struct omap_overlay_manager *mgr = NULL;
+
+	omapfb_lock(fbdev);
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ofbi->overlays[i]->manager) {
+			mgr = ofbi->overlays[i]->manager;
+			break;
+		}
+	}
+
+	if (!mgr) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	r = _omapfb_set_color_key(mgr, ck);
+err:
+	omapfb_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_get_color_key(struct fb_info *fbi,
+		struct omapfb_color_key *ck)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_overlay_manager *mgr = NULL;
+	int r = 0;
+	int i;
+
+	omapfb_lock(fbdev);
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ofbi->overlays[i]->manager) {
+			mgr = ofbi->overlays[i]->manager;
+			break;
+		}
+	}
+
+	if (!mgr) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	*ck = omapfb_color_keys[mgr->id];
+err:
+	omapfb_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_memory_read(struct fb_info *fbi,
+		struct omapfb_memory_read *mr)
+{
+	struct omap_dss_device *display = fb2display(fbi);
+	void *buf;
+	int r;
+
+	if (!display || !display->memory_read)
+		return -ENOENT;
+
+	if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
+		return -EFAULT;
+
+	if (mr->w * mr->h * 3 > mr->buffer_size)
+		return -EINVAL;
+
+	buf = vmalloc(mr->buffer_size);
+	if (!buf) {
+		DBG("vmalloc failed\n");
+		return -ENOMEM;
+	}
+
+	r = display->memory_read(display, buf, mr->buffer_size,
+			mr->x, mr->y, mr->w, mr->h);
+
+	if (r > 0) {
+		if (copy_to_user(mr->buffer, buf, mr->buffer_size))
+			r = -EFAULT;
+	}
+
+	vfree(buf);
+
+	return r;
+}
+
+static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev,
+			     struct omapfb_ovl_colormode *mode)
+{
+	int ovl_idx = mode->overlay_idx;
+	int mode_idx = mode->mode_idx;
+	struct omap_overlay *ovl;
+	enum omap_color_mode supported_modes;
+	struct fb_var_screeninfo var;
+	int i;
+
+	if (ovl_idx >= fbdev->num_overlays)
+		return -ENODEV;
+	ovl = fbdev->overlays[ovl_idx];
+	supported_modes = ovl->supported_modes;
+
+	mode_idx = mode->mode_idx;
+
+	for (i = 0; i < sizeof(supported_modes) * 8; i++) {
+		if (!(supported_modes & (1 << i)))
+			continue;
+		/*
+		 * It's possible that the FB doesn't support a mode
+		 * that is supported by the overlay, so call the
+		 * following here.
+		 */
+		if (dss_mode_to_fb_mode(1 << i, &var) < 0)
+			continue;
+
+		mode_idx--;
+		if (mode_idx < 0)
+			break;
+	}
+
+	if (i == sizeof(supported_modes) * 8)
+		return -ENOENT;
+
+	mode->bits_per_pixel = var.bits_per_pixel;
+	mode->nonstd = var.nonstd;
+	mode->red = var.red;
+	mode->green = var.green;
+	mode->blue = var.blue;
+	mode->transp = var.transp;
+
+	return 0;
+}
+
+static int omapfb_wait_for_go(struct fb_info *fbi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	int r = 0;
+	int i;
+
+	for (i = 0; i < ofbi->num_overlays; ++i) {
+		struct omap_overlay *ovl = ofbi->overlays[i];
+		r = ovl->wait_for_go(ovl);
+		if (r)
+			break;
+	}
+
+	return r;
+}
+
+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_dss_device *display = fb2display(fbi);
+
+	union {
+		struct omapfb_update_window_old	uwnd_o;
+		struct omapfb_update_window	uwnd;
+		struct omapfb_plane_info	plane_info;
+		struct omapfb_caps		caps;
+		struct omapfb_mem_info          mem_info;
+		struct omapfb_color_key		color_key;
+		struct omapfb_ovl_colormode	ovl_colormode;
+		enum omapfb_update_mode		update_mode;
+		int test_num;
+		struct omapfb_memory_read	memory_read;
+		struct omapfb_vram_info		vram_info;
+	} p;
+
+	int r = 0;
+
+	switch (cmd) {
+	case OMAPFB_SYNC_GFX:
+		DBG("ioctl SYNC_GFX\n");
+		if (!display || !display->sync) {
+			/* DSS1 never returns an error here, so we neither */
+			/*r = -EINVAL;*/
+			break;
+		}
+
+		r = display->sync(display);
+		break;
+
+	case OMAPFB_UPDATE_WINDOW_OLD:
+		DBG("ioctl UPDATE_WINDOW_OLD\n");
+		if (!display || !display->update) {
+			r = -EINVAL;
+			break;
+		}
+
+		if (copy_from_user(&p.uwnd_o,
+					(void __user *)arg,
+					sizeof(p.uwnd_o))) {
+			r = -EFAULT;
+			break;
+		}
+
+		r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y,
+				p.uwnd_o.width, p.uwnd_o.height);
+		break;
+
+	case OMAPFB_UPDATE_WINDOW:
+		DBG("ioctl UPDATE_WINDOW\n");
+		if (!display || !display->update) {
+			r = -EINVAL;
+			break;
+		}
+
+		if (copy_from_user(&p.uwnd, (void __user *)arg,
+					sizeof(p.uwnd))) {
+			r = -EFAULT;
+			break;
+		}
+
+		r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y,
+				p.uwnd.width, p.uwnd.height);
+		break;
+
+	case OMAPFB_SETUP_PLANE:
+		DBG("ioctl SETUP_PLANE\n");
+		if (copy_from_user(&p.plane_info, (void __user *)arg,
+					sizeof(p.plane_info)))
+			r = -EFAULT;
+		else
+			r = omapfb_setup_plane(fbi, &p.plane_info);
+		break;
+
+	case OMAPFB_QUERY_PLANE:
+		DBG("ioctl QUERY_PLANE\n");
+		r = omapfb_query_plane(fbi, &p.plane_info);
+		if (r < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.plane_info,
+					sizeof(p.plane_info)))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_SETUP_MEM:
+		DBG("ioctl SETUP_MEM\n");
+		if (copy_from_user(&p.mem_info, (void __user *)arg,
+					sizeof(p.mem_info)))
+			r = -EFAULT;
+		else
+			r = omapfb_setup_mem(fbi, &p.mem_info);
+		break;
+
+	case OMAPFB_QUERY_MEM:
+		DBG("ioctl QUERY_MEM\n");
+		r = omapfb_query_mem(fbi, &p.mem_info);
+		if (r < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.mem_info,
+					sizeof(p.mem_info)))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_GET_CAPS:
+		DBG("ioctl GET_CAPS\n");
+		if (!display) {
+			r = -EINVAL;
+			break;
+		}
+
+		memset(&p.caps, 0, sizeof(p.caps));
+		p.caps.ctrl = display->caps;
+
+		if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps)))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_GET_OVERLAY_COLORMODE:
+		DBG("ioctl GET_OVERLAY_COLORMODE\n");
+		if (copy_from_user(&p.ovl_colormode, (void __user *)arg,
+				   sizeof(p.ovl_colormode))) {
+			r = -EFAULT;
+			break;
+		}
+		r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode);
+		if (r < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.ovl_colormode,
+				 sizeof(p.ovl_colormode)))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_SET_UPDATE_MODE:
+		DBG("ioctl SET_UPDATE_MODE\n");
+		if (get_user(p.update_mode, (int __user *)arg))
+			r = -EFAULT;
+		else
+			r = omapfb_set_update_mode(fbi, p.update_mode);
+		break;
+
+	case OMAPFB_GET_UPDATE_MODE:
+		DBG("ioctl GET_UPDATE_MODE\n");
+		r = omapfb_get_update_mode(fbi, &p.update_mode);
+		if (r)
+			break;
+		if (put_user(p.update_mode,
+					(enum omapfb_update_mode __user *)arg))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_SET_COLOR_KEY:
+		DBG("ioctl SET_COLOR_KEY\n");
+		if (copy_from_user(&p.color_key, (void __user *)arg,
+				   sizeof(p.color_key)))
+			r = -EFAULT;
+		else
+			r = omapfb_set_color_key(fbi, &p.color_key);
+		break;
+
+	case OMAPFB_GET_COLOR_KEY:
+		DBG("ioctl GET_COLOR_KEY\n");
+		r = omapfb_get_color_key(fbi, &p.color_key);
+		if (r)
+			break;
+		if (copy_to_user((void __user *)arg, &p.color_key,
+				 sizeof(p.color_key)))
+			r = -EFAULT;
+		break;
+
+	case OMAPFB_WAITFORVSYNC:
+		DBG("ioctl WAITFORVSYNC\n");
+		if (!display) {
+			r = -EINVAL;
+			break;
+		}
+
+		r = display->wait_vsync(display);
+		break;
+
+	case OMAPFB_WAITFORGO:
+		DBG("ioctl WAITFORGO\n");
+		if (!display) {
+			r = -EINVAL;
+			break;
+		}
+
+		r = omapfb_wait_for_go(fbi);
+		break;
+
+	/* LCD and CTRL tests do the same thing for backward
+	 * compatibility */
+	case OMAPFB_LCD_TEST:
+		DBG("ioctl LCD_TEST\n");
+		if (get_user(p.test_num, (int __user *)arg)) {
+			r = -EFAULT;
+			break;
+		}
+		if (!display || !display->run_test) {
+			r = -EINVAL;
+			break;
+		}
+
+		r = display->run_test(display, p.test_num);
+
+		break;
+
+	case OMAPFB_CTRL_TEST:
+		DBG("ioctl CTRL_TEST\n");
+		if (get_user(p.test_num, (int __user *)arg)) {
+			r = -EFAULT;
+			break;
+		}
+		if (!display || !display->run_test) {
+			r = -EINVAL;
+			break;
+		}
+
+		r = display->run_test(display, p.test_num);
+
+		break;
+
+	case OMAPFB_MEMORY_READ:
+		DBG("ioctl MEMORY_READ\n");
+
+		if (copy_from_user(&p.memory_read, (void __user *)arg,
+					sizeof(p.memory_read))) {
+			r = -EFAULT;
+			break;
+		}
+
+		r = omapfb_memory_read(fbi, &p.memory_read);
+
+		break;
+
+	case OMAPFB_GET_VRAM_INFO: {
+		unsigned long vram, free, largest;
+
+		DBG("ioctl GET_VRAM_INFO\n");
+
+		omap_vram_get_info(&vram, &free, &largest);
+		p.vram_info.total = vram;
+		p.vram_info.free = free;
+		p.vram_info.largest_free_block = largest;
+
+		if (copy_to_user((void __user *)arg, &p.vram_info,
+					sizeof(p.vram_info)))
+			r = -EFAULT;
+		break;
+	}
+
+	default:
+		dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd);
+		r = -EINVAL;
+	}
+
+	if (r < 0)
+		DBG("ioctl failed: %d\n", r);
+
+	return r;
+}
+
+
--- /dev/null
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -0,0 +1,2137 @@
+/*
+ * linux/drivers/video/omap2/omapfb-main.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/omapfb.h>
+
+#include <mach/display.h>
+#include <mach/vram.h>
+#include <mach/vrfb.h>
+
+#include "omapfb.h"
+
+#define MODULE_NAME     "omapfb"
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+static char *def_mode;
+static char *def_vram;
+static int def_vrfb;
+static int def_rotate;
+static int def_mirror;
+
+#ifdef DEBUG
+unsigned int omapfb_debug;
+module_param_named(debug, omapfb_debug, bool, 0644);
+static unsigned int omapfb_test_pattern;
+module_param_named(test, omapfb_test_pattern, bool, 0644);
+#endif
+
+static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi);
+
+#ifdef DEBUG
+static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
+{
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	void __iomem *addr = fbi->screen_base;
+	const unsigned bytespp = var->bits_per_pixel >> 3;
+	const unsigned line_len = fix->line_length / bytespp;
+
+	int r = (color >> 16) & 0xff;
+	int g = (color >> 8) & 0xff;
+	int b = (color >> 0) & 0xff;
+
+	if (var->bits_per_pixel == 16) {
+		u16 __iomem *p = (u16 __iomem *)addr;
+		p += y * line_len + x;
+
+		r = r * 32 / 256;
+		g = g * 64 / 256;
+		b = b * 32 / 256;
+
+		__raw_writew((r << 11) | (g << 5) | (b << 0), p);
+	} else if (var->bits_per_pixel == 24) {
+		u8 __iomem *p = (u8 __iomem *)addr;
+		p += (y * line_len + x) * 3;
+
+		__raw_writeb(b, p + 0);
+		__raw_writeb(g, p + 1);
+		__raw_writeb(r, p + 2);
+	} else if (var->bits_per_pixel == 32) {
+		u32 __iomem *p = (u32 __iomem *)addr;
+		p += y * line_len + x;
+		__raw_writel(color, p);
+	}
+}
+
+static void fill_fb(struct fb_info *fbi)
+{
+	struct fb_var_screeninfo *var = &fbi->var;
+	const short w = var->xres_virtual;
+	const short h = var->yres_virtual;
+	void __iomem *addr = fbi->screen_base;
+	int y, x;
+
+	if (!addr)
+		return;
+
+	DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length);
+
+	for (y = 0; y < h; y++) {
+		for (x = 0; x < w; x++) {
+			if (x < 20 && y < 20)
+				draw_pixel(fbi, x, y, 0xffffff);
+			else if (x < 20 && (y > 20 && y < h - 20))
+				draw_pixel(fbi, x, y, 0xff);
+			else if (y < 20 && (x > 20 && x < w - 20))
+				draw_pixel(fbi, x, y, 0xff00);
+			else if (x > w - 20 && (y > 20 && y < h - 20))
+				draw_pixel(fbi, x, y, 0xff0000);
+			else if (y > h - 20 && (x > 20 && x < w - 20))
+				draw_pixel(fbi, x, y, 0xffff00);
+			else if (x == 20 || x == w - 20 ||
+					y == 20 || y == h - 20)
+				draw_pixel(fbi, x, y, 0xffffff);
+			else if (x == y || w - x == h - y)
+				draw_pixel(fbi, x, y, 0xff00ff);
+			else if (w - x == y || x == h - y)
+				draw_pixel(fbi, x, y, 0x00ffff);
+			else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) {
+				int t = x * 3 / w;
+				unsigned r = 0, g = 0, b = 0;
+				unsigned c;
+				if (var->bits_per_pixel == 16) {
+					if (t == 0)
+						b = (y % 32) * 256 / 32;
+					else if (t == 1)
+						g = (y % 64) * 256 / 64;
+					else if (t == 2)
+						r = (y % 32) * 256 / 32;
+				} else {
+					if (t == 0)
+						b = (y % 256);
+					else if (t == 1)
+						g = (y % 256);
+					else if (t == 2)
+						r = (y % 256);
+				}
+				c = (r << 16) | (g << 8) | (b << 0);
+				draw_pixel(fbi, x, y, c);
+			} else {
+				draw_pixel(fbi, x, y, 0);
+			}
+		}
+	}
+}
+#endif
+
+static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
+{
+	struct vrfb *vrfb = &ofbi->region.vrfb;
+	unsigned offset;
+
+	switch (rot) {
+	case FB_ROTATE_UR:
+		offset = 0;
+		break;
+	case FB_ROTATE_CW:
+		offset = vrfb->yoffset;
+		break;
+	case FB_ROTATE_UD:
+		offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset;
+		break;
+	case FB_ROTATE_CCW:
+		offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN;
+		break;
+	default:
+		BUG();
+	}
+
+	offset *= vrfb->bytespp;
+
+	return offset;
+}
+
+static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
+{
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		return ofbi->region.vrfb.paddr[rot]
+			+ omapfb_get_vrfb_offset(ofbi, rot);
+	} else {
+		return ofbi->region.paddr;
+	}
+}
+
+static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
+{
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		return ofbi->region.vrfb.paddr[0];
+	else
+		return ofbi->region.paddr;
+}
+
+static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
+{
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		return ofbi->region.vrfb.vaddr[0];
+	else
+		return ofbi->region.vaddr;
+}
+
+static struct omapfb_colormode omapfb_colormodes[] = {
+	{
+		.dssmode = OMAP_DSS_COLOR_UYVY,
+		.bits_per_pixel = 16,
+		.nonstd = OMAPFB_COLOR_YUV422,
+	}, {
+		.dssmode = OMAP_DSS_COLOR_YUV2,
+		.bits_per_pixel = 16,
+		.nonstd = OMAPFB_COLOR_YUY422,
+	}, {
+		.dssmode = OMAP_DSS_COLOR_ARGB16,
+		.bits_per_pixel = 16,
+		.red	= { .length = 4, .offset = 8, .msb_right = 0 },
+		.green	= { .length = 4, .offset = 4, .msb_right = 0 },
+		.blue	= { .length = 4, .offset = 0, .msb_right = 0 },
+		.transp	= { .length = 4, .offset = 12, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_RGB16,
+		.bits_per_pixel = 16,
+		.red	= { .length = 5, .offset = 11, .msb_right = 0 },
+		.green	= { .length = 6, .offset = 5, .msb_right = 0 },
+		.blue	= { .length = 5, .offset = 0, .msb_right = 0 },
+		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_RGB24P,
+		.bits_per_pixel = 24,
+		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
+		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
+		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
+		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_RGB24U,
+		.bits_per_pixel = 32,
+		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
+		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
+		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
+		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_ARGB32,
+		.bits_per_pixel = 32,
+		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
+		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
+		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
+		.transp	= { .length = 8, .offset = 24, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_RGBA32,
+		.bits_per_pixel = 32,
+		.red	= { .length = 8, .offset = 24, .msb_right = 0 },
+		.green	= { .length = 8, .offset = 16, .msb_right = 0 },
+		.blue	= { .length = 8, .offset = 8, .msb_right = 0 },
+		.transp	= { .length = 8, .offset = 0, .msb_right = 0 },
+	}, {
+		.dssmode = OMAP_DSS_COLOR_RGBX32,
+		.bits_per_pixel = 32,
+		.red	= { .length = 8, .offset = 24, .msb_right = 0 },
+		.green	= { .length = 8, .offset = 16, .msb_right = 0 },
+		.blue	= { .length = 8, .offset = 8, .msb_right = 0 },
+		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
+	},
+};
+
+static bool cmp_var_to_colormode(struct fb_var_screeninfo *var,
+		struct omapfb_colormode *color)
+{
+	bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2)
+	{
+		return f1->length == f2->length &&
+			f1->offset == f2->offset &&
+			f1->msb_right == f2->msb_right;
+	}
+
+	if (var->bits_per_pixel == 0 ||
+			var->red.length == 0 ||
+			var->blue.length == 0 ||
+			var->green.length == 0)
+		return 0;
+
+	return var->bits_per_pixel == color->bits_per_pixel &&
+		cmp_component(&var->red, &color->red) &&
+		cmp_component(&var->green, &color->green) &&
+		cmp_component(&var->blue, &color->blue) &&
+		cmp_component(&var->transp, &color->transp);
+}
+
+static void assign_colormode_to_var(struct fb_var_screeninfo *var,
+		struct omapfb_colormode *color)
+{
+	var->bits_per_pixel = color->bits_per_pixel;
+	var->nonstd = color->nonstd;
+	var->red = color->red;
+	var->green = color->green;
+	var->blue = color->blue;
+	var->transp = color->transp;
+}
+
+static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var)
+{
+	enum omap_color_mode dssmode;
+	int i;
+
+	/* first match with nonstd field */
+	if (var->nonstd) {
+		for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
+			struct omapfb_colormode *mode = &omapfb_colormodes[i];
+			if (var->nonstd == mode->nonstd) {
+				assign_colormode_to_var(var, mode);
+				return mode->dssmode;
+			}
+		}
+
+		return -EINVAL;
+	}
+
+	/* then try exact match of bpp and colors */
+	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
+		struct omapfb_colormode *mode = &omapfb_colormodes[i];
+		if (cmp_var_to_colormode(var, mode)) {
+			assign_colormode_to_var(var, mode);
+			return mode->dssmode;
+		}
+	}
+
+	/* match with bpp if user has not filled color fields
+	 * properly */
+	switch (var->bits_per_pixel) {
+	case 1:
+		dssmode = OMAP_DSS_COLOR_CLUT1;
+		break;
+	case 2:
+		dssmode = OMAP_DSS_COLOR_CLUT2;
+		break;
+	case 4:
+		dssmode = OMAP_DSS_COLOR_CLUT4;
+		break;
+	case 8:
+		dssmode = OMAP_DSS_COLOR_CLUT8;
+		break;
+	case 12:
+		dssmode = OMAP_DSS_COLOR_RGB12U;
+		break;
+	case 16:
+		dssmode = OMAP_DSS_COLOR_RGB16;
+		break;
+	case 24:
+		dssmode = OMAP_DSS_COLOR_RGB24P;
+		break;
+	case 32:
+		dssmode = OMAP_DSS_COLOR_RGB24U;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
+		struct omapfb_colormode *mode = &omapfb_colormodes[i];
+		if (dssmode == mode->dssmode) {
+			assign_colormode_to_var(var, mode);
+			return mode->dssmode;
+		}
+	}
+
+	return -EINVAL;
+}
+
+int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
+			struct fb_var_screeninfo *var)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
+		struct omapfb_colormode *mode = &omapfb_colormodes[i];
+		if (dssmode == mode->dssmode) {
+			assign_colormode_to_var(var, mode);
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+void set_fb_fix(struct fb_info *fbi)
+{
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_mem_region *rg = &ofbi->region;
+
+	DBG("set_fb_fix\n");
+
+	/* used by open/write in fbmem.c */
+	fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
+
+	DBG("changing rotation to %d\n", var->rotate);
+
+	/* used by mmap in fbmem.c */
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		switch (var->nonstd) {
+		case OMAPFB_COLOR_YUV422:
+		case OMAPFB_COLOR_YUY422:
+			fix->line_length =
+				(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2;
+			break;
+		default:
+			fix->line_length =
+				(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
+			break;
+		}
+	} else
+		fix->line_length =
+			(var->xres_virtual * var->bits_per_pixel) >> 3;
+	fix->smem_start = omapfb_get_region_paddr(ofbi);
+	fix->smem_len = rg->size;
+
+	fix->type = FB_TYPE_PACKED_PIXELS;
+
+	if (var->nonstd)
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+	else {
+		switch (var->bits_per_pixel) {
+		case 32:
+		case 24:
+		case 16:
+		case 12:
+			fix->visual = FB_VISUAL_TRUECOLOR;
+			/* 12bpp is stored in 16 bits */
+			break;
+		case 1:
+		case 2:
+		case 4:
+		case 8:
+			fix->visual = FB_VISUAL_PSEUDOCOLOR;
+			break;
+		}
+	}
+
+	fix->accel = FB_ACCEL_NONE;
+
+	fix->xpanstep = 1;
+	fix->ypanstep = 1;
+
+	if (rg->size && ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		unsigned bytespp;
+		bool yuv_mode;
+		enum omap_color_mode mode;
+
+		mode = fb_mode_to_dss_mode(var);
+
+		bytespp = var->bits_per_pixel >> 3;
+
+		if (mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY)
+			yuv_mode = true;
+		else
+			yuv_mode = false;
+
+		omap_vrfb_setup(&rg->vrfb, rg->paddr,
+				var->xres_virtual,
+				var->yres_virtual,
+				bytespp, yuv_mode);
+	}
+}
+
+/* check new var and possibly modify it to be ok */
+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omap_dss_device *display = fb2display(fbi);
+	unsigned long max_frame_size;
+	unsigned long line_size;
+	int xres_min, yres_min;
+	int xres_max, yres_max;
+	enum omap_color_mode mode = 0;
+	int i;
+	int bytespp;
+
+	DBG("check_fb_var %d\n", ofbi->id);
+
+	if (ofbi->region.size == 0)
+		return 0;
+
+	mode = fb_mode_to_dss_mode(var);
+	if (mode < 0) {
+		DBG("cannot convert var to omap dss mode\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ofbi->num_overlays; ++i) {
+		if ((ofbi->overlays[i]->supported_modes & mode) == 0) {
+			DBG("invalid mode\n");
+			return -EINVAL;
+		}
+	}
+
+	if (var->rotate < 0 || var->rotate > 3)
+		return -EINVAL;
+
+	xres_min = OMAPFB_PLANE_XRES_MIN;
+	xres_max = 2048;
+	yres_min = OMAPFB_PLANE_YRES_MIN;
+	yres_max = 2048;
+
+	bytespp = var->bits_per_pixel >> 3;
+
+	/* XXX: some applications seem to set virtual res to 0. */
+	if (var->xres_virtual == 0)
+		var->xres_virtual = var->xres;
+
+	if (var->yres_virtual == 0)
+		var->yres_virtual = var->yres;
+
+	if (var->xres_virtual < xres_min || var->yres_virtual < yres_min)
+		return -EINVAL;
+
+	if (var->xres < xres_min)
+		var->xres = xres_min;
+	if (var->yres < yres_min)
+		var->yres = yres_min;
+	if (var->xres > xres_max)
+		var->xres = xres_max;
+	if (var->yres > yres_max)
+		var->yres = yres_max;
+
+	if (var->xres > var->xres_virtual)
+		var->xres = var->xres_virtual;
+	if (var->yres > var->yres_virtual)
+		var->yres = var->yres_virtual;
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		line_size = OMAP_VRFB_LINE_LEN * bytespp;
+	else
+		line_size = var->xres_virtual * bytespp;
+
+	max_frame_size = ofbi->region.size;
+
+	DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size);
+
+	if (line_size * var->yres_virtual > max_frame_size) {
+		DBG("can't fit FB into memory, reducing y\n");
+		var->yres_virtual = max_frame_size / line_size;
+
+		if (var->yres_virtual < yres_min)
+			var->yres_virtual = yres_min;
+
+		if (var->yres > var->yres_virtual)
+			var->yres = var->yres_virtual;
+	}
+
+	if (line_size * var->yres_virtual > max_frame_size) {
+		DBG("can't fit FB into memory, reducing x\n");
+		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+			return -EINVAL;
+
+		var->xres_virtual = max_frame_size / var->yres_virtual /
+			bytespp;
+
+		if (var->xres_virtual < xres_min)
+			var->xres_virtual = xres_min;
+
+		if (var->xres > var->xres_virtual)
+			var->xres = var->xres_virtual;
+
+		line_size = var->xres_virtual * bytespp;
+	}
+
+	if (line_size * var->yres_virtual > max_frame_size) {
+		DBG("cannot fit FB to memory\n");
+		return -EINVAL;
+	}
+
+	if (var->xres + var->xoffset > var->xres_virtual)
+		var->xoffset = var->xres_virtual - var->xres;
+	if (var->yres + var->yoffset > var->yres_virtual)
+		var->yoffset = var->yres_virtual - var->yres;
+
+	DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n",
+			var->xres, var->yres,
+			var->xres_virtual, var->yres_virtual);
+
+	var->height             = -1;
+	var->width              = -1;
+	var->grayscale          = 0;
+
+	if (display && display->get_timings) {
+		struct omap_video_timings timings;
+		display->get_timings(display, &timings);
+
+		/* pixclock in ps, the rest in pixclock */
+		var->pixclock = timings.pixel_clock != 0 ?
+			KHZ2PICOS(timings.pixel_clock) :
+			0;
+		var->left_margin = timings.hfp;
+		var->right_margin = timings.hbp;
+		var->upper_margin = timings.vfp;
+		var->lower_margin = timings.vbp;
+		var->hsync_len = timings.hsw;
+		var->vsync_len = timings.vsw;
+	} else {
+		var->pixclock = 0;
+		var->left_margin = 0;
+		var->right_margin = 0;
+		var->upper_margin = 0;
+		var->lower_margin = 0;
+		var->hsync_len = 0;
+		var->vsync_len = 0;
+	}
+
+	/* TODO: get these from panel->config */
+	var->vmode              = FB_VMODE_NONINTERLACED;
+	var->sync               = 0;
+
+	return 0;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * fbdev framework callbacks
+ * ---------------------------------------------------------------------------
+ */
+static int omapfb_open(struct fb_info *fbi, int user)
+{
+	return 0;
+}
+
+static int omapfb_release(struct fb_info *fbi, int user)
+{
+#if 0
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_dss_device *display = fb2display(fbi);
+
+	DBG("Closing fb with plane index %d\n", ofbi->id);
+
+	omapfb_lock(fbdev);
+
+	if (display && display->get_update_mode && display->update) {
+		/* XXX this update should be removed, I think. But it's
+		 * good for debugging */
+		if (display->get_update_mode(display) ==
+				OMAP_DSS_UPDATE_MANUAL) {
+			u16 w, h;
+
+			if (display->sync)
+				display->sync(display);
+
+			display->get_resolution(display, &w, &h);
+			display->update(display, 0, 0, w, h);
+		}
+	}
+
+	if (display && display->sync)
+		display->sync(display);
+
+	omapfb_unlock(fbdev);
+#endif
+	return 0;
+}
+
+/* setup overlay according to the fb */
+static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+		u16 posx, u16 posy, u16 outw, u16 outh)
+{
+	int r = 0;
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	enum omap_color_mode mode = 0;
+	int offset;
+	u32 data_start_p;
+	void __iomem *data_start_v;
+	struct omap_overlay_info info;
+	int xres, yres;
+	int screen_width;
+	int mirror;
+	int rotation = var->rotate;
+	int i;
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ovl != ofbi->overlays[i])
+			continue;
+
+		rotation = (rotation + ofbi->rotation[i]) % 4;
+		break;
+	}
+
+	DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id,
+			posx, posy, outw, outh);
+
+	if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) {
+		xres = var->yres;
+		yres = var->xres;
+	} else {
+		xres = var->xres;
+		yres = var->yres;
+	}
+
+	offset = ((var->yoffset * var->xres_virtual +
+				var->xoffset) * var->bits_per_pixel) >> 3;
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
+		data_start_v = NULL;
+	} else {
+		data_start_p = omapfb_get_region_paddr(ofbi);
+		data_start_v = omapfb_get_region_vaddr(ofbi);
+	}
+
+	data_start_p += offset;
+	data_start_v += offset;
+
+	mode = fb_mode_to_dss_mode(var);
+
+	if (mode == -EINVAL) {
+		DBG("fb_mode_to_dss_mode failed");
+		r = -EINVAL;
+		goto err;
+	}
+
+	switch (var->nonstd) {
+	case OMAPFB_COLOR_YUV422:
+	case OMAPFB_COLOR_YUY422:
+		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+			screen_width = fix->line_length
+				/ (var->bits_per_pixel >> 2);
+			break;
+		}
+	default:
+		screen_width = fix->line_length / (var->bits_per_pixel >> 3);
+		break;
+	}
+
+	ovl->get_overlay_info(ovl, &info);
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		mirror = 0;
+	else
+		mirror = ofbi->mirror;
+
+	info.paddr = data_start_p;
+	info.vaddr = data_start_v;
+	info.screen_width = screen_width;
+	info.width = xres;
+	info.height = yres;
+	info.color_mode = mode;
+	info.rotation_type = ofbi->rotation_type;
+	info.rotation = rotation;
+	info.mirror = mirror;
+
+	info.pos_x = posx;
+	info.pos_y = posy;
+	info.out_width = outw;
+	info.out_height = outh;
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r) {
+		DBG("ovl->setup_overlay_info failed\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	DBG("setup_overlay failed\n");
+	return r;
+}
+
+/* apply var to the overlay */
+int omapfb_apply_changes(struct fb_info *fbi, int init)
+{
+	int r = 0;
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct omap_overlay *ovl;
+	u16 posx, posy;
+	u16 outw, outh;
+	int i;
+
+#ifdef DEBUG
+	if (omapfb_test_pattern)
+		fill_fb(fbi);
+#endif
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		ovl = ofbi->overlays[i];
+
+		DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
+
+		if (ofbi->region.size == 0) {
+			/* the fb is not available. disable the overlay */
+			omapfb_overlay_enable(ovl, 0);
+			if (!init && ovl->manager)
+				ovl->manager->apply(ovl->manager);
+			continue;
+		}
+
+		if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
+			int rotation = (var->rotate + ofbi->rotation[i]) % 4;
+			if (rotation == FB_ROTATE_CW ||
+					rotation == FB_ROTATE_CCW) {
+				outw = var->yres;
+				outh = var->xres;
+			} else {
+				outw = var->xres;
+				outh = var->yres;
+			}
+		} else {
+			outw = ovl->info.out_width;
+			outh = ovl->info.out_height;
+		}
+
+		if (init) {
+			posx = 0;
+			posy = 0;
+		} else {
+			posx = ovl->info.pos_x;
+			posy = ovl->info.pos_y;
+		}
+
+		r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh);
+		if (r)
+			goto err;
+
+		if (!init && ovl->manager)
+			ovl->manager->apply(ovl->manager);
+	}
+	return 0;
+err:
+	DBG("apply_changes failed\n");
+	return r;
+}
+
+/* checks var and eventually tweaks it to something supported,
+ * DO NOT MODIFY PAR */
+static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+	int r;
+
+	DBG("check_var(%d)\n", FB2OFB(fbi)->id);
+
+	r = check_fb_var(fbi, var);
+
+	return r;
+}
+
+/* set the video mode according to info->var */
+static int omapfb_set_par(struct fb_info *fbi)
+{
+	int r;
+
+	DBG("set_par(%d)\n", FB2OFB(fbi)->id);
+
+	set_fb_fix(fbi);
+	r = omapfb_apply_changes(fbi, 0);
+
+	return r;
+}
+
+static int omapfb_pan_display(struct fb_var_screeninfo *var,
+		struct fb_info *fbi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	int r = 0;
+
+	DBG("pan_display(%d)\n", ofbi->id);
+
+	if (var->xoffset != fbi->var.xoffset ||
+	    var->yoffset != fbi->var.yoffset) {
+		struct fb_var_screeninfo new_var;
+
+		new_var = fbi->var;
+		new_var.xoffset = var->xoffset;
+		new_var.yoffset = var->yoffset;
+
+		r = check_fb_var(fbi, &new_var);
+
+		if (r == 0) {
+			fbi->var = new_var;
+			set_fb_fix(fbi);
+			r = omapfb_apply_changes(fbi, 0);
+		}
+	}
+
+	return r;
+}
+
+static void mmap_user_open(struct vm_area_struct *vma)
+{
+	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+
+	atomic_inc(&ofbi->map_count);
+}
+
+static void mmap_user_close(struct vm_area_struct *vma)
+{
+	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+
+	atomic_dec(&ofbi->map_count);
+}
+
+static struct vm_operations_struct mmap_user_ops = {
+	.open = mmap_user_open,
+	.close = mmap_user_close,
+};
+
+static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	unsigned long off;
+	unsigned long start;
+	u32 len;
+
+	if (vma->vm_end - vma->vm_start == 0)
+		return 0;
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	off = vma->vm_pgoff << PAGE_SHIFT;
+
+	start = omapfb_get_region_paddr(ofbi);
+	len = fix->smem_len;
+	if (off >= len)
+		return -EINVAL;
+	if ((vma->vm_end - vma->vm_start + off) > len)
+		return -EINVAL;
+
+	off += start;
+
+	DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off);
+
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	vma->vm_ops = &mmap_user_ops;
+	vma->vm_private_data = ofbi;
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
+		return -EAGAIN;
+	/* vm_ops.open won't be called for mmap itself. */
+	atomic_inc(&ofbi->map_count);
+	return 0;
+}
+
+/* Store a single color palette entry into a pseudo palette or the hardware
+ * palette if one is available. For now we support only 16bpp and thus store
+ * the entry only to the pseudo palette.
+ */
+static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
+		u_int blue, u_int transp, int update_hw_pal)
+{
+	/*struct omapfb_info *ofbi = FB2OFB(fbi);*/
+	/*struct omapfb2_device *fbdev = ofbi->fbdev;*/
+	struct fb_var_screeninfo *var = &fbi->var;
+	int r = 0;
+
+	enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */
+
+	/*switch (plane->color_mode) {*/
+	switch (mode) {
+	case OMAPFB_COLOR_YUV422:
+	case OMAPFB_COLOR_YUV420:
+	case OMAPFB_COLOR_YUY422:
+		r = -EINVAL;
+		break;
+	case OMAPFB_COLOR_CLUT_8BPP:
+	case OMAPFB_COLOR_CLUT_4BPP:
+	case OMAPFB_COLOR_CLUT_2BPP:
+	case OMAPFB_COLOR_CLUT_1BPP:
+		/*
+		   if (fbdev->ctrl->setcolreg)
+		   r = fbdev->ctrl->setcolreg(regno, red, green, blue,
+		   transp, update_hw_pal);
+		   */
+		/* Fallthrough */
+		r = -EINVAL;
+		break;
+	case OMAPFB_COLOR_RGB565:
+	case OMAPFB_COLOR_RGB444:
+	case OMAPFB_COLOR_RGB24P:
+	case OMAPFB_COLOR_RGB24U:
+		if (r != 0)
+			break;
+
+		if (regno < 0) {
+			r = -EINVAL;
+			break;
+		}
+
+		if (regno < 16) {
+			u16 pal;
+			pal = ((red >> (16 - var->red.length)) <<
+					var->red.offset) |
+				((green >> (16 - var->green.length)) <<
+				 var->green.offset) |
+				(blue >> (16 - var->blue.length));
+			((u32 *)(fbi->pseudo_palette))[regno] = pal;
+		}
+		break;
+	default:
+		BUG();
+	}
+	return r;
+}
+
+static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+		u_int transp, struct fb_info *info)
+{
+	DBG("setcolreg\n");
+
+	return _setcolreg(info, regno, red, green, blue, transp, 1);
+}
+
+static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+{
+	int count, index, r;
+	u16 *red, *green, *blue, *transp;
+	u16 trans = 0xffff;
+
+	DBG("setcmap\n");
+
+	red     = cmap->red;
+	green   = cmap->green;
+	blue    = cmap->blue;
+	transp  = cmap->transp;
+	index   = cmap->start;
+
+	for (count = 0; count < cmap->len; count++) {
+		if (transp)
+			trans = *transp++;
+		r = _setcolreg(info, index++, *red++, *green++, *blue++, trans,
+				count == cmap->len - 1);
+		if (r != 0)
+			return r;
+	}
+
+	return 0;
+}
+
+static void omapfb_vrfb_suspend_all(struct omapfb2_device *fbdev)
+{
+	int i;
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
+
+		if (ofbi->region.vrfb.vaddr[0])
+			omap_vrfb_suspend_ctx(&ofbi->region.vrfb);
+	}
+}
+
+static void omapfb_vrfb_resume_all(struct omapfb2_device *fbdev)
+{
+	int i;
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
+
+		if (ofbi->region.vrfb.vaddr[0])
+			omap_vrfb_resume_ctx(&ofbi->region.vrfb);
+	}
+}
+
+static int omapfb_blank(int blank, struct fb_info *fbi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_dss_device *display = fb2display(fbi);
+	int do_update = 0;
+	int r = 0;
+
+	omapfb_lock(fbdev);
+
+	switch (blank) {
+	case FB_BLANK_UNBLANK:
+		if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
+			goto exit;
+
+		omapfb_vrfb_resume_all(fbdev);
+
+		if (display->resume)
+			r = display->resume(display);
+
+		if (r == 0 && display->get_update_mode &&
+				display->get_update_mode(display) ==
+				OMAP_DSS_UPDATE_MANUAL)
+			do_update = 1;
+
+		break;
+
+	case FB_BLANK_NORMAL:
+		/* FB_BLANK_NORMAL could be implemented.
+		 * Needs DSS additions. */
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
+			goto exit;
+
+		if (display->suspend)
+			r = display->suspend(display);
+
+		omapfb_vrfb_suspend_all(fbdev);
+
+		break;
+
+	default:
+		r = -EINVAL;
+	}
+
+exit:
+	omapfb_unlock(fbdev);
+
+	if (r == 0 && do_update && display->update) {
+		u16 w, h;
+		display->get_resolution(display, &w, &h);
+
+		r = display->update(display, 0, 0, w, h);
+	}
+
+	return r;
+}
+
+#if 0
+/* XXX fb_read and fb_write are needed for VRFB */
+ssize_t omapfb_write(struct fb_info *info, const char __user *buf,
+		size_t count, loff_t *ppos)
+{
+	DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos);
+	/* XXX needed for VRFB */
+	return count;
+}
+#endif
+
+static struct fb_ops omapfb_ops = {
+	.owner          = THIS_MODULE,
+	.fb_open        = omapfb_open,
+	.fb_release     = omapfb_release,
+	.fb_fillrect    = cfb_fillrect,
+	.fb_copyarea    = cfb_copyarea,
+	.fb_imageblit   = cfb_imageblit,
+	.fb_blank       = omapfb_blank,
+	.fb_ioctl       = omapfb_ioctl,
+	.fb_check_var   = omapfb_check_var,
+	.fb_set_par     = omapfb_set_par,
+	.fb_pan_display = omapfb_pan_display,
+	.fb_mmap	= omapfb_mmap,
+	.fb_setcolreg	= omapfb_setcolreg,
+	.fb_setcmap	= omapfb_setcmap,
+	/*.fb_write	= omapfb_write,*/
+};
+
+static void omapfb_free_fbmem(struct fb_info *fbi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
+
+	rg = &ofbi->region;
+
+	if (rg->paddr)
+		if (omap_vram_free(rg->paddr, rg->size))
+			dev_err(fbdev->dev, "VRAM FREE failed\n");
+
+	if (rg->vaddr)
+		iounmap(rg->vaddr);
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		/* unmap the 0 angle rotation */
+		if (rg->vrfb.vaddr[0]) {
+			iounmap(rg->vrfb.vaddr[0]);
+			omap_vrfb_release_ctx(&rg->vrfb);
+		}
+	}
+
+	rg->vaddr = NULL;
+	rg->paddr = 0;
+	rg->alloc = 0;
+	rg->size = 0;
+}
+
+static void clear_fb_info(struct fb_info *fbi)
+{
+	memset(&fbi->var, 0, sizeof(fbi->var));
+	memset(&fbi->fix, 0, sizeof(fbi->fix));
+	strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id));
+}
+
+static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev)
+{
+	int i;
+
+	DBG("free all fbmem\n");
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct fb_info *fbi = fbdev->fbs[i];
+		omapfb_free_fbmem(fbi);
+		clear_fb_info(fbi);
+	}
+
+	return 0;
+}
+
+static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+		unsigned long paddr)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
+	void __iomem *vaddr;
+	int r;
+
+	rg = &ofbi->region;
+	memset(rg, 0, sizeof(*rg));
+
+	size = PAGE_ALIGN(size);
+
+	if (!paddr) {
+		DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
+		r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr);
+	} else {
+		DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
+				ofbi->id);
+		r = omap_vram_reserve(paddr, size);
+	}
+
+	if (r) {
+		dev_err(fbdev->dev, "failed to allocate framebuffer\n");
+		return -ENOMEM;
+	}
+
+	if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) {
+		vaddr = ioremap_wc(paddr, size);
+
+		if (!vaddr) {
+			dev_err(fbdev->dev, "failed to ioremap framebuffer\n");
+			omap_vram_free(paddr, size);
+			return -ENOMEM;
+		}
+
+		DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
+	} else {
+		void __iomem *va;
+
+		r = omap_vrfb_request_ctx(&rg->vrfb);
+		if (r) {
+			dev_err(fbdev->dev, "vrfb create ctx failed\n");
+			return r;
+		}
+
+		/* only ioremap the 0 angle view */
+		va = ioremap_wc(rg->vrfb.paddr[0], size);
+
+		if (!va) {
+			printk(KERN_ERR "vrfb: ioremap failed\n");
+			omap_vrfb_release_ctx(&rg->vrfb);
+			return -ENOMEM;
+		}
+
+		DBG("ioremapped vrfb area 0 to %p\n", va);
+
+		rg->vrfb.vaddr[0] = va;
+
+		vaddr = NULL;
+	}
+
+	rg->paddr = paddr;
+	rg->vaddr = vaddr;
+	rg->size = size;
+	rg->alloc = 1;
+
+	return 0;
+}
+
+/* allocate fbmem using display resolution as reference */
+static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
+		unsigned long paddr)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omap_dss_device *display;
+	int bytespp;
+
+	display =  fb2display(fbi);
+
+	if (!display)
+		return 0;
+
+	switch (display->get_recommended_bpp(display)) {
+	case 16:
+		bytespp = 2;
+		break;
+	case 24:
+		bytespp = 4;
+		break;
+	default:
+		bytespp = 4;
+		break;
+	}
+
+	if (!size) {
+		u16 w, h;
+
+		display->get_resolution(display, &w, &h);
+
+		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+#ifdef DEBUG
+			int oldw = w, oldh = h;
+#endif
+
+			omap_vrfb_adjust_size(&w, &h, bytespp);
+
+			/* Because we change the resolution of the 0 degree
+			 * view, we need to alloc max(w, h) for height */
+			h = max(w, h);
+			w = OMAP_VRFB_LINE_LEN;
+
+			DBG("adjusting fb mem size for VRFB, %dx%d -> %dx%d\n",
+					oldw, oldh, w, h);
+		}
+
+		size = w * h * bytespp;
+	}
+
+	if (!size)
+		return 0;
+
+	return omapfb_alloc_fbmem(fbi, size, paddr);
+}
+
+static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt)
+{
+	enum omap_color_mode mode;
+
+	switch (fmt) {
+	case OMAPFB_COLOR_RGB565:
+		mode = OMAP_DSS_COLOR_RGB16;
+		break;
+	case OMAPFB_COLOR_YUV422:
+		mode = OMAP_DSS_COLOR_YUV2;
+		break;
+	case OMAPFB_COLOR_CLUT_8BPP:
+		mode = OMAP_DSS_COLOR_CLUT8;
+		break;
+	case OMAPFB_COLOR_CLUT_4BPP:
+		mode = OMAP_DSS_COLOR_CLUT4;
+		break;
+	case OMAPFB_COLOR_CLUT_2BPP:
+		mode = OMAP_DSS_COLOR_CLUT2;
+		break;
+	case OMAPFB_COLOR_CLUT_1BPP:
+		mode = OMAP_DSS_COLOR_CLUT1;
+		break;
+	case OMAPFB_COLOR_RGB444:
+		mode = OMAP_DSS_COLOR_RGB12U;
+		break;
+	case OMAPFB_COLOR_YUY422:
+		mode = OMAP_DSS_COLOR_UYVY;
+		break;
+	case OMAPFB_COLOR_ARGB16:
+		mode = OMAP_DSS_COLOR_ARGB16;
+		break;
+	case OMAPFB_COLOR_RGB24U:
+		mode = OMAP_DSS_COLOR_RGB24U;
+		break;
+	case OMAPFB_COLOR_RGB24P:
+		mode = OMAP_DSS_COLOR_RGB24P;
+		break;
+	case OMAPFB_COLOR_ARGB32:
+		mode = OMAP_DSS_COLOR_ARGB32;
+		break;
+	case OMAPFB_COLOR_RGBA32:
+		mode = OMAP_DSS_COLOR_RGBA32;
+		break;
+	case OMAPFB_COLOR_RGBX32:
+		mode = OMAP_DSS_COLOR_RGBX32;
+		break;
+	default:
+		mode = -EINVAL;
+	}
+
+	return mode;
+}
+
+static int omapfb_parse_vram_param(const char *param, int max_entries,
+		unsigned long *sizes, unsigned long *paddrs)
+{
+	int fbnum;
+	unsigned long size;
+	unsigned long paddr = 0;
+	char *p, *start;
+
+	start = (char *)param;
+
+	while (1) {
+		p = start;
+
+		fbnum = simple_strtoul(p, &p, 10);
+
+		if (p == param)
+			return -EINVAL;
+
+		if (*p != ':')
+			return -EINVAL;
+
+		if (fbnum >= max_entries)
+			return -EINVAL;
+
+		size = memparse(p + 1, &p);
+
+		if (!size)
+			return -EINVAL;
+
+		paddr = 0;
+
+		if (*p == '@') {
+			paddr = simple_strtoul(p + 1, &p, 16);
+
+			if (!paddr)
+				return -EINVAL;
+
+		}
+
+		paddrs[fbnum] = paddr;
+		sizes[fbnum] = size;
+
+		if (*p == 0)
+			break;
+
+		if (*p != ',')
+			return -EINVAL;
+
+		++p;
+
+		start = p;
+	}
+
+	return 0;
+}
+
+static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
+{
+	int i, r;
+	unsigned long vram_sizes[10];
+	unsigned long vram_paddrs[10];
+
+	memset(&vram_sizes, 0, sizeof(vram_sizes));
+	memset(&vram_paddrs, 0, sizeof(vram_paddrs));
+
+	if (def_vram &&	omapfb_parse_vram_param(def_vram, 10,
+				vram_sizes, vram_paddrs)) {
+		dev_err(fbdev->dev, "failed to parse vram parameter\n");
+
+		memset(&vram_sizes, 0, sizeof(vram_sizes));
+		memset(&vram_paddrs, 0, sizeof(vram_paddrs));
+	}
+
+	if (fbdev->dev->platform_data) {
+		struct omapfb_platform_data *opd;
+		opd = fbdev->dev->platform_data;
+		for (i = 0; i < opd->mem_desc.region_cnt; ++i) {
+			if (!vram_sizes[i]) {
+				unsigned long size;
+				unsigned long paddr;
+
+				size = opd->mem_desc.region[i].size;
+				paddr = opd->mem_desc.region[i].paddr;
+
+				vram_sizes[i] = size;
+				vram_paddrs[i] = paddr;
+			}
+		}
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		/* allocate memory automatically only for fb0, or if
+		 * excplicitly defined with vram or plat data option */
+		if (i == 0 || vram_sizes[i] != 0) {
+			r = omapfb_alloc_fbmem_display(fbdev->fbs[i],
+					vram_sizes[i], vram_paddrs[i]);
+
+			if (r)
+				return r;
+		}
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
+		struct omapfb2_mem_region *rg;
+		rg = &ofbi->region;
+
+		DBG("region%d phys %08x virt %p size=%lu\n",
+				i,
+				rg->paddr,
+				rg->vaddr,
+				rg->size);
+	}
+
+	return 0;
+}
+
+int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_dss_device *display = fb2display(fbi);
+	struct omapfb2_mem_region *rg = &ofbi->region;
+	unsigned long old_size = rg->size;
+	unsigned long old_paddr = rg->paddr;
+	int old_type = rg->type;
+	int r;
+
+	if (type > OMAPFB_MEMTYPE_MAX)
+		return -EINVAL;
+
+	size = PAGE_ALIGN(size);
+
+	if (old_size == size && old_type == type)
+		return 0;
+
+	if (display && display->sync)
+			display->sync(display);
+
+	omapfb_free_fbmem(fbi);
+
+	if (size == 0) {
+		clear_fb_info(fbi);
+		return 0;
+	}
+
+	r = omapfb_alloc_fbmem(fbi, size, 0);
+
+	if (r) {
+		if (old_size)
+			omapfb_alloc_fbmem(fbi, old_size, old_paddr);
+
+		if (rg->size == 0)
+			clear_fb_info(fbi);
+
+		return r;
+	}
+
+	if (old_size == size)
+		return 0;
+
+	if (old_size == 0) {
+		DBG("initializing fb %d\n", ofbi->id);
+		r = omapfb_fb_init(fbdev, fbi);
+		if (r) {
+			DBG("omapfb_fb_init failed\n");
+			goto err;
+		}
+		r = omapfb_apply_changes(fbi, 1);
+		if (r) {
+			DBG("omapfb_apply_changes failed\n");
+			goto err;
+		}
+	} else {
+		struct fb_var_screeninfo new_var;
+		memcpy(&new_var, &fbi->var, sizeof(new_var));
+		r = check_fb_var(fbi, &new_var);
+		if (r)
+			goto err;
+		memcpy(&fbi->var, &new_var, sizeof(fbi->var));
+		set_fb_fix(fbi);
+	}
+
+	return 0;
+err:
+	omapfb_free_fbmem(fbi);
+	clear_fb_info(fbi);
+	return r;
+}
+
+/* initialize fb_info, var, fix to something sane based on the display */
+static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
+{
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct omap_dss_device *display = fb2display(fbi);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	int r = 0;
+
+	fbi->fbops = &omapfb_ops;
+	fbi->flags = FBINFO_FLAG_DEFAULT;
+	fbi->pseudo_palette = fbdev->pseudo_palette;
+
+	if (ofbi->region.size == 0) {
+		clear_fb_info(fbi);
+		return 0;
+	}
+
+	var->nonstd = 0;
+	var->bits_per_pixel = 0;
+
+	var->rotate = def_rotate;
+
+	/*
+	 * Check if there is a default color format set in the board file,
+	 * and use this format instead the default deducted from the
+	 * display bpp.
+	 */
+	if (fbdev->dev->platform_data) {
+		struct omapfb_platform_data *opd;
+		int id = ofbi->id;
+
+		opd = fbdev->dev->platform_data;
+		if (opd->mem_desc.region[id].format_used) {
+			enum omap_color_mode mode;
+			enum omapfb_color_format format;
+
+			format = opd->mem_desc.region[id].format;
+			mode = fb_format_to_dss_mode(format);
+			if (mode < 0) {
+				r = mode;
+				goto err;
+			}
+			r = dss_mode_to_fb_mode(mode, var);
+			if (r < 0)
+				goto err;
+		}
+	}
+
+	if (display) {
+		u16 w, h;
+		int rotation = (var->rotate + ofbi->rotation[0]) % 4;
+
+		display->get_resolution(display, &w, &h);
+
+		if (rotation == FB_ROTATE_CW ||
+				rotation == FB_ROTATE_CCW) {
+			var->xres = h;
+			var->yres = w;
+		} else {
+			var->xres = w;
+			var->yres = h;
+		}
+
+		var->xres_virtual = var->xres;
+		var->yres_virtual = var->yres;
+
+		if (!var->bits_per_pixel) {
+			switch (display->get_recommended_bpp(display)) {
+			case 16:
+				var->bits_per_pixel = 16;
+				break;
+			case 24:
+				var->bits_per_pixel = 32;
+				break;
+			default:
+				dev_err(fbdev->dev, "illegal display "
+						"bpp\n");
+				return -EINVAL;
+			}
+		}
+	} else {
+		/* if there's no display, let's just guess some basic values */
+		var->xres = 320;
+		var->yres = 240;
+		var->xres_virtual = var->xres;
+		var->yres_virtual = var->yres;
+		if (!var->bits_per_pixel)
+			var->bits_per_pixel = 16;
+	}
+
+	r = check_fb_var(fbi, var);
+	if (r)
+		goto err;
+
+	set_fb_fix(fbi);
+
+	r = fb_alloc_cmap(&fbi->cmap, 256, 0);
+	if (r)
+		dev_err(fbdev->dev, "unable to allocate color map memory\n");
+
+err:
+	return r;
+}
+
+static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi)
+{
+	fb_dealloc_cmap(&fbi->cmap);
+}
+
+
+static void omapfb_free_resources(struct omapfb2_device *fbdev)
+{
+	int i;
+
+	DBG("free_resources\n");
+
+	if (fbdev == NULL)
+		return;
+
+	for (i = 0; i < fbdev->num_fbs; i++)
+		unregister_framebuffer(fbdev->fbs[i]);
+
+	/* free the reserved fbmem */
+	omapfb_free_all_fbmem(fbdev);
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		fbinfo_cleanup(fbdev, fbdev->fbs[i]);
+		framebuffer_release(fbdev->fbs[i]);
+	}
+
+	for (i = 0; i < fbdev->num_displays; i++) {
+		if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
+			fbdev->displays[i]->disable(fbdev->displays[i]);
+
+		omap_dss_put_device(fbdev->displays[i]);
+	}
+
+	dev_set_drvdata(fbdev->dev, NULL);
+	kfree(fbdev);
+}
+
+static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
+{
+	int r, i;
+
+	fbdev->num_fbs = 0;
+
+	DBG("create %d framebuffers\n",	CONFIG_FB_OMAP2_NUM_FBS);
+
+	/* allocate fb_infos */
+	for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) {
+		struct fb_info *fbi;
+		struct omapfb_info *ofbi;
+
+		fbi = framebuffer_alloc(sizeof(struct omapfb_info),
+				fbdev->dev);
+
+		if (fbi == NULL) {
+			dev_err(fbdev->dev,
+				"unable to allocate memory for plane info\n");
+			return -ENOMEM;
+		}
+
+		clear_fb_info(fbi);
+
+		fbdev->fbs[i] = fbi;
+
+		ofbi = FB2OFB(fbi);
+		ofbi->fbdev = fbdev;
+		ofbi->id = i;
+
+		/* assign these early, so that fb alloc can use them */
+		ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
+			OMAP_DSS_ROT_DMA;
+		ofbi->mirror = def_mirror;
+
+		fbdev->num_fbs++;
+	}
+
+	DBG("fb_infos allocated\n");
+
+	/* assign overlays for the fbs */
+	for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
+
+		ofbi->overlays[0] = fbdev->overlays[i];
+		ofbi->num_overlays = 1;
+	}
+
+	/* allocate fb memories */
+	r = omapfb_allocate_all_fbs(fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "failed to allocate fbmem\n");
+		return r;
+	}
+
+	DBG("fbmems allocated\n");
+
+	/* setup fb_infos */
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
+		if (r) {
+			dev_err(fbdev->dev, "failed to setup fb_info\n");
+			return r;
+		}
+	}
+
+	DBG("fb_infos initialized\n");
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		r = register_framebuffer(fbdev->fbs[i]);
+		if (r != 0) {
+			dev_err(fbdev->dev,
+				"registering framebuffer %d failed\n", i);
+			return r;
+		}
+	}
+
+	DBG("framebuffers registered\n");
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		r = omapfb_apply_changes(fbdev->fbs[i], 1);
+		if (r) {
+			dev_err(fbdev->dev, "failed to change mode\n");
+			return r;
+		}
+	}
+
+	DBG("create sysfs for fbs\n");
+	r = omapfb_create_sysfs(fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "failed to create sysfs entries\n");
+		return r;
+	}
+
+	/* Enable fb0 */
+	if (fbdev->num_fbs > 0) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
+
+		if (ofbi->num_overlays > 0) {
+			struct omap_overlay *ovl = ofbi->overlays[0];
+
+			r = omapfb_overlay_enable(ovl, 1);
+
+			if (r) {
+				dev_err(fbdev->dev,
+						"failed to enable overlay\n");
+				return r;
+			}
+		}
+	}
+
+	DBG("create_framebuffers done\n");
+
+	return 0;
+}
+
+static int omapfb_mode_to_timings(const char *mode_str,
+		struct omap_video_timings *timings, u8 *bpp)
+{
+	struct fb_info fbi;
+	struct fb_var_screeninfo var;
+	struct fb_ops fbops;
+	int r;
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+	if (strcmp(mode_str, "pal") == 0) {
+		*timings = omap_dss_pal_timings;
+		*bpp = 0;
+		return 0;
+	} else if (strcmp(mode_str, "ntsc") == 0) {
+		*timings = omap_dss_ntsc_timings;
+		*bpp = 0;
+		return 0;
+	}
+#endif
+
+	/* this is quite a hack, but I wanted to use the modedb and for
+	 * that we need fb_info and var, so we create dummy ones */
+
+	memset(&fbi, 0, sizeof(fbi));
+	memset(&var, 0, sizeof(var));
+	memset(&fbops, 0, sizeof(fbops));
+	fbi.fbops = &fbops;
+
+	r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24);
+
+	if (r != 0) {
+		timings->pixel_clock = PICOS2KHZ(var.pixclock);
+		timings->hfp = var.left_margin;
+		timings->hbp = var.right_margin;
+		timings->vfp = var.upper_margin;
+		timings->vbp = var.lower_margin;
+		timings->hsw = var.hsync_len;
+		timings->vsw = var.vsync_len;
+		timings->x_res = var.xres;
+		timings->y_res = var.yres;
+
+		switch (var.bits_per_pixel) {
+		case 16:
+			*bpp = 16;
+			break;
+		case 24:
+		case 32:
+		default:
+			*bpp = 24;
+			break;
+		}
+
+		return 0;
+	} else {
+		return -EINVAL;
+	}
+}
+
+static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str)
+{
+	int r;
+	u8 bpp;
+	struct omap_video_timings timings;
+
+	r = omapfb_mode_to_timings(mode_str, &timings, &bpp);
+	if (r)
+		return r;
+
+	display->panel.recommended_bpp = bpp;
+
+	if (!display->check_timings || !display->set_timings)
+		return -EINVAL;
+
+	r = display->check_timings(display, &timings);
+	if (r)
+		return r;
+
+	display->set_timings(display, &timings);
+
+	return 0;
+}
+
+static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
+{
+	char *str, *options, *this_opt;
+	int r = 0;
+
+	str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL);
+	strcpy(str, def_mode);
+	options = str;
+
+	while (!r && (this_opt = strsep(&options, ",")) != NULL) {
+		char *p, *display_str, *mode_str;
+		struct omap_dss_device *display;
+		int i;
+
+		p = strchr(this_opt, ':');
+		if (!p) {
+			r = -EINVAL;
+			break;
+		}
+
+		*p = 0;
+		display_str = this_opt;
+		mode_str = p + 1;
+
+		display = NULL;
+		for (i = 0; i < fbdev->num_displays; ++i) {
+			if (strcmp(fbdev->displays[i]->name,
+						display_str) == 0) {
+				display = fbdev->displays[i];
+				break;
+			}
+		}
+
+		if (!display) {
+			r = -EINVAL;
+			break;
+		}
+
+		r = omapfb_set_def_mode(display, mode_str);
+		if (r)
+			break;
+	}
+
+	kfree(str);
+
+	return r;
+}
+
+static int omapfb_probe(struct platform_device *pdev)
+{
+	struct omapfb2_device *fbdev = NULL;
+	int r = 0;
+	int i;
+	struct omap_overlay *ovl;
+	struct omap_dss_device *def_display;
+	struct omap_dss_device *dssdev;
+
+	DBG("omapfb_probe\n");
+
+	if (pdev->num_resources != 0) {
+		dev_err(&pdev->dev, "probed for an unknown device\n");
+		r = -ENODEV;
+		goto err0;
+	}
+
+	fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL);
+	if (fbdev == NULL) {
+		r = -ENOMEM;
+		goto err0;
+	}
+
+	mutex_init(&fbdev->mtx);
+
+	fbdev->dev = &pdev->dev;
+	platform_set_drvdata(pdev, fbdev);
+
+	fbdev->num_displays = 0;
+	dssdev = NULL;
+	for_each_dss_dev(dssdev) {
+		omap_dss_get_device(dssdev);
+		fbdev->displays[fbdev->num_displays++] = dssdev;
+	}
+
+	if (fbdev->num_displays == 0) {
+		dev_err(&pdev->dev, "no displays\n");
+		r = -EINVAL;
+		goto cleanup;
+	}
+
+	fbdev->num_overlays = omap_dss_get_num_overlays();
+	for (i = 0; i < fbdev->num_overlays; i++)
+		fbdev->overlays[i] = omap_dss_get_overlay(i);
+
+	fbdev->num_managers = omap_dss_get_num_overlay_managers();
+	for (i = 0; i < fbdev->num_managers; i++)
+		fbdev->managers[i] = omap_dss_get_overlay_manager(i);
+
+	if (def_mode && strlen(def_mode) > 0) {
+		if (omapfb_parse_def_modes(fbdev))
+			dev_warn(&pdev->dev, "cannot parse default modes\n");
+	}
+
+	r = omapfb_create_framebuffers(fbdev);
+	if (r)
+		goto cleanup;
+
+	for (i = 0; i < fbdev->num_managers; i++) {
+		struct omap_overlay_manager *mgr;
+		mgr = fbdev->managers[i];
+		r = mgr->apply(mgr);
+		if (r)
+			dev_warn(fbdev->dev, "failed to apply dispc config\n");
+	}
+
+	DBG("mgr->apply'ed\n");
+
+	/* gfx overlay should be the default one. find a display
+	 * connected to that, and use it as default display */
+	ovl = omap_dss_get_overlay(0);
+	if (ovl->manager && ovl->manager->device) {
+		def_display = ovl->manager->device;
+	} else {
+		dev_warn(&pdev->dev, "cannot find default display\n");
+		def_display = NULL;
+	}
+
+	if (def_display) {
+		u16 w, h;
+		r = def_display->enable(def_display);
+		if (r)
+			dev_warn(fbdev->dev, "Failed to enable display '%s'\n",
+					def_display->name);
+
+		/* set the update mode */
+		if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
+			if (def_display->enable_te)
+				def_display->enable_te(def_display, 1);
+			if (def_display->set_update_mode)
+				def_display->set_update_mode(def_display,
+						OMAP_DSS_UPDATE_AUTO);
+#else /* MANUAL_UPDATE */
+			if (def_display->enable_te)
+				def_display->enable_te(def_display, 0);
+			if (def_display->set_update_mode)
+				def_display->set_update_mode(def_display,
+						OMAP_DSS_UPDATE_MANUAL);
+
+			def_display->get_resolution(def_display, &w, &h);
+			def_display->update(def_display, 0, 0, w, h);
+#endif
+		} else {
+			if (def_display->set_update_mode)
+				def_display->set_update_mode(def_display,
+						OMAP_DSS_UPDATE_AUTO);
+		}
+	}
+
+	return 0;
+
+cleanup:
+	omapfb_free_resources(fbdev);
+err0:
+	dev_err(&pdev->dev, "failed to setup omapfb\n");
+	return r;
+}
+
+static int omapfb_remove(struct platform_device *pdev)
+{
+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
+
+	/* FIXME: wait till completion of pending events */
+
+	omapfb_remove_sysfs(fbdev);
+
+	omapfb_free_resources(fbdev);
+
+	return 0;
+}
+
+static struct platform_driver omapfb_driver = {
+	.probe          = omapfb_probe,
+	.remove         = omapfb_remove,
+	.driver         = {
+		.name   = "omapfb",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init omapfb_init(void)
+{
+	DBG("omapfb_init\n");
+
+	if (platform_driver_register(&omapfb_driver)) {
+		printk(KERN_ERR "failed to register omapfb driver\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit omapfb_exit(void)
+{
+	DBG("omapfb_exit\n");
+	platform_driver_unregister(&omapfb_driver);
+}
+
+module_param_named(mode, def_mode, charp, 0);
+module_param_named(vram, def_vram, charp, 0);
+module_param_named(rotate, def_rotate, int, 0);
+module_param_named(vrfb, def_vrfb, bool, 0);
+module_param_named(mirror, def_mirror, bool, 0);
+
+/* late_initcall to let panel/ctrl drivers loaded first.
+ * I guess better option would be a more dynamic approach,
+ * so that omapfb reacts to new panels when they are loaded */
+late_initcall(omapfb_init);
+/*module_init(omapfb_init);*/
+module_exit(omapfb_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
+MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -0,0 +1,507 @@
+/*
+ * linux/drivers/video/omap2/omapfb-sysfs.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fb.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/omapfb.h>
+
+#include <mach/display.h>
+#include <mach/vrfb.h>
+
+#include "omapfb.h"
+
+static ssize_t show_rotate_type(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type);
+}
+
+static ssize_t store_rotate_type(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	enum omap_dss_rotation_type rot_type;
+	int r;
+
+	rot_type = simple_strtoul(buf, NULL, 0);
+
+	if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB)
+		return -EINVAL;
+
+	lock_fb_info(fbi);
+
+	r = 0;
+	if (rot_type == ofbi->rotation_type)
+		goto out;
+
+	if (ofbi->region.size) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	ofbi->rotation_type = rot_type;
+
+	/*
+	 * Since the VRAM for this FB is not allocated at the moment we don't
+	 * need to do any further parameter checking at this point.
+	 */
+out:
+	unlock_fb_info(fbi);
+
+	return r ? r : count;
+}
+
+
+static ssize_t show_mirror(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror);
+}
+
+static ssize_t store_mirror(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	bool mirror;
+	int r;
+	struct fb_var_screeninfo new_var;
+
+	mirror = simple_strtoul(buf, NULL, 0);
+
+	if (mirror != 0 && mirror != 1)
+		return -EINVAL;
+
+	lock_fb_info(fbi);
+
+	ofbi->mirror = mirror;
+
+	memcpy(&new_var, &fbi->var, sizeof(new_var));
+	r = check_fb_var(fbi, &new_var);
+	if (r)
+		goto out;
+	memcpy(&fbi->var, &new_var, sizeof(fbi->var));
+
+	set_fb_fix(fbi);
+
+	r = omapfb_apply_changes(fbi, 0);
+	if (r)
+		goto out;
+
+	r = count;
+out:
+	unlock_fb_info(fbi);
+
+	return r;
+}
+
+static ssize_t show_overlays(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	ssize_t l = 0;
+	int t;
+
+	omapfb_lock(fbdev);
+	lock_fb_info(fbi);
+
+	for (t = 0; t < ofbi->num_overlays; t++) {
+		struct omap_overlay *ovl = ofbi->overlays[t];
+		int ovlnum;
+
+		for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum)
+			if (ovl == fbdev->overlays[ovlnum])
+				break;
+
+		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
+				t == 0 ? "" : ",", ovlnum);
+	}
+
+	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
+
+	unlock_fb_info(fbi);
+	omapfb_unlock(fbdev);
+
+	return l;
+}
+
+static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev,
+		struct omap_overlay *ovl)
+{
+	int i, t;
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
+
+		for (t = 0; t < ofbi->num_overlays; t++) {
+			if (ofbi->overlays[t] == ovl)
+				return ofbi;
+		}
+	}
+
+	return NULL;
+}
+
+static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB];
+	struct omap_overlay *ovl;
+	int num_ovls, r, i;
+	int len;
+	bool added = false;
+
+	num_ovls = 0;
+
+	len = strlen(buf);
+	if (buf[len - 1] == '\n')
+		len = len - 1;
+
+	omapfb_lock(fbdev);
+	lock_fb_info(fbi);
+
+	if (len > 0) {
+		char *p = (char *)buf;
+		int ovlnum;
+
+		while (p < buf + len) {
+			int found;
+			if (num_ovls == OMAPFB_MAX_OVL_PER_FB) {
+				r = -EINVAL;
+				goto out;
+			}
+
+			ovlnum = simple_strtoul(p, &p, 0);
+			if (ovlnum > fbdev->num_overlays) {
+				r = -EINVAL;
+				goto out;
+			}
+
+			found = 0;
+			for (i = 0; i < num_ovls; ++i) {
+				if (ovls[i] == fbdev->overlays[ovlnum]) {
+					found = 1;
+					break;
+				}
+			}
+
+			if (!found)
+				ovls[num_ovls++] = fbdev->overlays[ovlnum];
+
+			p++;
+		}
+	}
+
+	for (i = 0; i < num_ovls; ++i) {
+		struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]);
+		if (ofbi2 && ofbi2 != ofbi) {
+			dev_err(fbdev->dev, "overlay already in use\n");
+			r = -EINVAL;
+			goto out;
+		}
+	}
+
+	/* detach unused overlays */
+	for (i = 0; i < ofbi->num_overlays; ++i) {
+		int t, found;
+
+		ovl = ofbi->overlays[i];
+
+		found = 0;
+
+		for (t = 0; t < num_ovls; ++t) {
+			if (ovl == ovls[t]) {
+				found = 1;
+				break;
+			}
+		}
+
+		if (found)
+			continue;
+
+		DBG("detaching %d\n", ofbi->overlays[i]->id);
+
+		omapfb_overlay_enable(ovl, 0);
+
+		if (ovl->manager)
+			ovl->manager->apply(ovl->manager);
+
+		for (t = i + 1; t < ofbi->num_overlays; t++) {
+			ofbi->rotation[t-1] = ofbi->rotation[t];
+			ofbi->overlays[t-1] = ofbi->overlays[t];
+		}
+
+		ofbi->num_overlays--;
+		i--;
+	}
+
+	for (i = 0; i < num_ovls; ++i) {
+		int t, found;
+
+		ovl = ovls[i];
+
+		found = 0;
+
+		for (t = 0; t < ofbi->num_overlays; ++t) {
+			if (ovl == ofbi->overlays[t]) {
+				found = 1;
+				break;
+			}
+		}
+
+		if (found)
+			continue;
+		ofbi->rotation[ofbi->num_overlays] = 0;
+		ofbi->overlays[ofbi->num_overlays++] = ovl;
+
+		added = true;
+	}
+
+	if (added) {
+		r = omapfb_apply_changes(fbi, 0);
+		if (r)
+			goto out;
+	}
+
+	r = count;
+out:
+	unlock_fb_info(fbi);
+	omapfb_unlock(fbdev);
+
+	return r;
+}
+
+static ssize_t show_overlays_rotate(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	ssize_t l = 0;
+	int t;
+
+	lock_fb_info(fbi);
+
+	for (t = 0; t < ofbi->num_overlays; t++) {
+		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
+				t == 0 ? "" : ",", ofbi->rotation[t]);
+	}
+
+	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
+
+	unlock_fb_info(fbi);
+
+	return l;
+}
+
+static ssize_t store_overlays_rotate(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	int num_ovls = 0, r, i;
+	int len;
+	bool changed = false;
+	u8 rotation[OMAPFB_MAX_OVL_PER_FB];
+
+	len = strlen(buf);
+	if (buf[len - 1] == '\n')
+		len = len - 1;
+
+	lock_fb_info(fbi);
+
+	if (len > 0) {
+		char *p = (char *)buf;
+
+		while (p < buf + len) {
+			int rot;
+
+			if (num_ovls == ofbi->num_overlays) {
+				r = -EINVAL;
+				goto out;
+			}
+
+			rot = simple_strtoul(p, &p, 0);
+			if (rot < 0 || rot > 3) {
+				r = -EINVAL;
+				goto out;
+			}
+
+			if (ofbi->rotation[num_ovls] != rot)
+				changed = true;
+
+			rotation[num_ovls++] = rot;
+
+			p++;
+		}
+	}
+
+	if (num_ovls != ofbi->num_overlays) {
+		r = -EINVAL;
+		goto out;
+	}
+
+	if (changed) {
+		for (i = 0; i < num_ovls; ++i)
+			ofbi->rotation[i] = rotation[i];
+
+		r = omapfb_apply_changes(fbi, 0);
+		if (r)
+			goto out;
+
+		/* FIXME error handling? */
+	}
+
+	r = count;
+out:
+	unlock_fb_info(fbi);
+
+	return r;
+}
+
+static ssize_t show_size(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
+}
+
+static ssize_t store_size(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	unsigned long size;
+	int r;
+	int i;
+
+	size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0));
+
+	lock_fb_info(fbi);
+
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ofbi->overlays[i]->info.enabled) {
+			r = -EBUSY;
+			goto out;
+		}
+	}
+
+	if (size != ofbi->region.size) {
+		r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
+		if (r) {
+			dev_err(dev, "realloc fbmem failed\n");
+			goto out;
+		}
+	}
+
+	r = count;
+out:
+	unlock_fb_info(fbi);
+
+	return r;
+}
+
+static ssize_t show_phys(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
+}
+
+static ssize_t show_virt(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fbi = dev_get_drvdata(dev);
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+
+	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
+}
+
+static struct device_attribute omapfb_attrs[] = {
+	__ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type,
+			store_rotate_type),
+	__ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror),
+	__ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size),
+	__ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays),
+	__ATTR(overlays_rotate, S_IRUGO | S_IWUSR, show_overlays_rotate,
+			store_overlays_rotate),
+	__ATTR(phys_addr, S_IRUGO, show_phys, NULL),
+	__ATTR(virt_addr, S_IRUGO, show_virt, NULL),
+};
+
+int omapfb_create_sysfs(struct omapfb2_device *fbdev)
+{
+	int i;
+	int r;
+
+	DBG("create sysfs for fbs\n");
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		int t;
+		for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) {
+			r = device_create_file(fbdev->fbs[i]->dev,
+					&omapfb_attrs[t]);
+
+			if (r) {
+				dev_err(fbdev->dev, "failed to create sysfs "
+						"file\n");
+				return r;
+			}
+		}
+	}
+
+	return 0;
+}
+
+void omapfb_remove_sysfs(struct omapfb2_device *fbdev)
+{
+	int i, t;
+
+	DBG("remove sysfs for fbs\n");
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++)
+			device_remove_file(fbdev->fbs[i]->dev,
+					&omapfb_attrs[t]);
+	}
+}
+
--- /dev/null
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -0,0 +1,146 @@
+/*
+ * linux/drivers/video/omap2/omapfb.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
+#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
+
+#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT
+#define DEBUG
+#endif
+
+#include <mach/display.h>
+
+#ifdef DEBUG
+extern unsigned int omapfb_debug;
+#define DBG(format, ...) \
+	if (omapfb_debug) \
+		printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__)
+#else
+#define DBG(format, ...)
+#endif
+
+#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par))
+
+/* max number of overlays to which a framebuffer data can be direct */
+#define OMAPFB_MAX_OVL_PER_FB 3
+
+struct omapfb2_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	struct vrfb	vrfb;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	bool		alloc;		/* allocated by the driver */
+	bool		map;		/* kernel mapped by the driver */
+};
+
+/* appended to fb_info */
+struct omapfb_info {
+	int id;
+	struct omapfb2_mem_region region;
+	atomic_t map_count;
+	int num_overlays;
+	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
+	struct omapfb2_device *fbdev;
+	enum omap_dss_rotation_type rotation_type;
+	u8 rotation[OMAPFB_MAX_OVL_PER_FB];
+	bool mirror;
+};
+
+struct omapfb2_device {
+	struct device *dev;
+	struct mutex  mtx;
+
+	u32 pseudo_palette[17];
+
+	int state;
+
+	unsigned num_fbs;
+	struct fb_info *fbs[10];
+
+	unsigned num_displays;
+	struct omap_dss_device *displays[10];
+	unsigned num_overlays;
+	struct omap_overlay *overlays[10];
+	unsigned num_managers;
+	struct omap_overlay_manager *managers[10];
+};
+
+struct omapfb_colormode {
+	enum omap_color_mode dssmode;
+	u32 bits_per_pixel;
+	u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+void set_fb_fix(struct fb_info *fbi);
+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var);
+int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type);
+int omapfb_apply_changes(struct fb_info *fbi, int init);
+
+int omapfb_create_sysfs(struct omapfb2_device *fbdev);
+void omapfb_remove_sysfs(struct omapfb2_device *fbdev);
+
+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
+
+int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
+			struct fb_var_screeninfo *var);
+
+/* find the display connected to this fb, if any */
+static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
+{
+	struct omapfb_info *ofbi = FB2OFB(fbi);
+	int i;
+
+	/* XXX: returns the display connected to first attached overlay */
+	for (i = 0; i < ofbi->num_overlays; i++) {
+		if (ofbi->overlays[i]->manager)
+			return ofbi->overlays[i]->manager->device;
+	}
+
+	return NULL;
+}
+
+static inline void omapfb_lock(struct omapfb2_device *fbdev)
+{
+	mutex_lock(&fbdev->mtx);
+}
+
+static inline void omapfb_unlock(struct omapfb2_device *fbdev)
+{
+	mutex_unlock(&fbdev->mtx);
+}
+
+static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
+		int enable)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+	info.enabled = enable;
+	return ovl->set_overlay_info(ovl, &info);
+}
+
+#endif
--- /dev/null
+++ b/drivers/video/omap2/vram.c
@@ -0,0 +1,655 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/bootmem.h>
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+
+#include <asm/setup.h>
+
+#include <mach/sram.h>
+#include <mach/vram.h>
+#include <mach/dma.h>
+
+#ifdef DEBUG
+#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__)
+#else
+#define DBG(format, ...)
+#endif
+
+#define OMAP2_SRAM_START		0x40200000
+/* Maximum size, in reality this is smaller if SRAM is partially locked. */
+#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
+
+/* postponed regions are used to temporarily store region information at boot
+ * time when we cannot yet allocate the region list */
+#define MAX_POSTPONED_REGIONS 10
+
+static bool vram_initialized;
+static int postponed_cnt;
+static struct {
+	unsigned long paddr;
+	size_t size;
+} postponed_regions[MAX_POSTPONED_REGIONS];
+
+struct vram_alloc {
+	struct list_head list;
+	unsigned long paddr;
+	unsigned pages;
+};
+
+struct vram_region {
+	struct list_head list;
+	struct list_head alloc_list;
+	unsigned long paddr;
+	unsigned pages;
+};
+
+static DEFINE_MUTEX(region_mutex);
+static LIST_HEAD(region_list);
+
+static inline int region_mem_type(unsigned long paddr)
+{
+	if (paddr >= OMAP2_SRAM_START &&
+	    paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
+		return OMAP_VRAM_MEMTYPE_SRAM;
+	else
+		return OMAP_VRAM_MEMTYPE_SDRAM;
+}
+
+static struct vram_region *omap_vram_create_region(unsigned long paddr,
+		unsigned pages)
+{
+	struct vram_region *rm;
+
+	rm = kzalloc(sizeof(*rm), GFP_KERNEL);
+
+	if (rm) {
+		INIT_LIST_HEAD(&rm->alloc_list);
+		rm->paddr = paddr;
+		rm->pages = pages;
+	}
+
+	return rm;
+}
+
+#if 0
+static void omap_vram_free_region(struct vram_region *vr)
+{
+	list_del(&vr->list);
+	kfree(vr);
+}
+#endif
+
+static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr,
+		unsigned long paddr, unsigned pages)
+{
+	struct vram_alloc *va;
+	struct vram_alloc *new;
+
+	new = kzalloc(sizeof(*va), GFP_KERNEL);
+
+	if (!new)
+		return NULL;
+
+	new->paddr = paddr;
+	new->pages = pages;
+
+	list_for_each_entry(va, &vr->alloc_list, list) {
+		if (va->paddr > new->paddr)
+			break;
+	}
+
+	list_add_tail(&new->list, &va->list);
+
+	return new;
+}
+
+static void omap_vram_free_allocation(struct vram_alloc *va)
+{
+	list_del(&va->list);
+	kfree(va);
+}
+
+int omap_vram_add_region(unsigned long paddr, size_t size)
+{
+	struct vram_region *rm;
+	unsigned pages;
+
+	if (vram_initialized) {
+		DBG("adding region paddr %08lx size %d\n",
+				paddr, size);
+
+		size &= PAGE_MASK;
+		pages = size >> PAGE_SHIFT;
+
+		rm = omap_vram_create_region(paddr, pages);
+		if (rm == NULL)
+			return -ENOMEM;
+
+		list_add(&rm->list, &region_list);
+	} else {
+		if (postponed_cnt == MAX_POSTPONED_REGIONS)
+			return -ENOMEM;
+
+		postponed_regions[postponed_cnt].paddr = paddr;
+		postponed_regions[postponed_cnt].size = size;
+
+		++postponed_cnt;
+	}
+	return 0;
+}
+
+int omap_vram_free(unsigned long paddr, size_t size)
+{
+	struct vram_region *rm;
+	struct vram_alloc *alloc;
+	unsigned start, end;
+
+	DBG("free mem paddr %08lx size %d\n", paddr, size);
+
+	size = PAGE_ALIGN(size);
+
+	mutex_lock(&region_mutex);
+
+	list_for_each_entry(rm, &region_list, list) {
+		list_for_each_entry(alloc, &rm->alloc_list, list) {
+			start = alloc->paddr;
+			end = alloc->paddr + (alloc->pages >> PAGE_SHIFT);
+
+			if (start >= paddr && end < paddr + size)
+				goto found;
+		}
+	}
+
+	mutex_unlock(&region_mutex);
+	return -EINVAL;
+
+found:
+	omap_vram_free_allocation(alloc);
+
+	mutex_unlock(&region_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(omap_vram_free);
+
+static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
+{
+	struct vram_region *rm;
+	struct vram_alloc *alloc;
+	size_t size;
+
+	size = pages << PAGE_SHIFT;
+
+	list_for_each_entry(rm, &region_list, list) {
+		unsigned long start, end;
+
+		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
+
+		if (region_mem_type(rm->paddr) != region_mem_type(paddr))
+			continue;
+
+		start = rm->paddr;
+		end = start + (rm->pages << PAGE_SHIFT) - 1;
+		if (start > paddr || end < paddr + size - 1)
+			continue;
+
+		DBG("block ok, checking allocs\n");
+
+		list_for_each_entry(alloc, &rm->alloc_list, list) {
+			end = alloc->paddr - 1;
+
+			if (start <= paddr && end >= paddr + size - 1)
+				goto found;
+
+			start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
+		}
+
+		end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1;
+
+		if (!(start <= paddr && end >= paddr + size - 1))
+			continue;
+found:
+		DBG("found area start %lx, end %lx\n", start, end);
+
+		if (omap_vram_create_allocation(rm, paddr, pages) == NULL)
+			return -ENOMEM;
+
+		return 0;
+	}
+
+	return -ENOMEM;
+}
+
+int omap_vram_reserve(unsigned long paddr, size_t size)
+{
+	unsigned pages;
+	int r;
+
+	DBG("reserve mem paddr %08lx size %d\n", paddr, size);
+
+	size = PAGE_ALIGN(size);
+	pages = size >> PAGE_SHIFT;
+
+	mutex_lock(&region_mutex);
+
+	r = _omap_vram_reserve(paddr, pages);
+
+	mutex_unlock(&region_mutex);
+
+	return r;
+}
+EXPORT_SYMBOL(omap_vram_reserve);
+
+static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct completion *compl = data;
+	complete(compl);
+}
+
+static int _omap_vram_clear(u32 paddr, unsigned pages)
+{
+	struct completion compl;
+	unsigned elem_count;
+	unsigned frame_count;
+	int r;
+	int lch;
+
+	init_completion(&compl);
+
+	r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
+			_omap_vram_dma_cb,
+			&compl, &lch);
+	if (r) {
+		pr_err("VRAM: request_dma failed for memory clear\n");
+		return -EBUSY;
+	}
+
+	elem_count = pages * PAGE_SIZE / 4;
+	frame_count = 1;
+
+	omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
+			elem_count, frame_count,
+			OMAP_DMA_SYNC_ELEMENT,
+			0, 0);
+
+	omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
+			paddr, 0, 0);
+
+	omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
+
+	omap_start_dma(lch);
+
+	if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) {
+		omap_stop_dma(lch);
+		pr_err("VRAM: dma timeout while clearing memory\n");
+		r = -EIO;
+		goto err;
+	}
+
+	r = 0;
+err:
+	omap_free_dma(lch);
+
+	return r;
+}
+
+static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
+{
+	struct vram_region *rm;
+	struct vram_alloc *alloc;
+
+	list_for_each_entry(rm, &region_list, list) {
+		unsigned long start, end;
+
+		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
+
+		if (region_mem_type(rm->paddr) != mtype)
+			continue;
+
+		start = rm->paddr;
+
+		list_for_each_entry(alloc, &rm->alloc_list, list) {
+			end = alloc->paddr;
+
+			if (end - start >= pages << PAGE_SHIFT)
+				goto found;
+
+			start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
+		}
+
+		end = rm->paddr + (rm->pages << PAGE_SHIFT);
+found:
+		if (end - start < pages << PAGE_SHIFT)
+			continue;
+
+		DBG("found %lx, end %lx\n", start, end);
+
+		alloc = omap_vram_create_allocation(rm, start, pages);
+		if (alloc == NULL)
+			return -ENOMEM;
+
+		*paddr = start;
+
+		_omap_vram_clear(start, pages);
+
+		return 0;
+	}
+
+	return -ENOMEM;
+}
+
+int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
+{
+	unsigned pages;
+	int r;
+
+	BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size);
+
+	DBG("alloc mem type %d size %d\n", mtype, size);
+
+	size = PAGE_ALIGN(size);
+	pages = size >> PAGE_SHIFT;
+
+	mutex_lock(&region_mutex);
+
+	r = _omap_vram_alloc(mtype, pages, paddr);
+
+	mutex_unlock(&region_mutex);
+
+	return r;
+}
+EXPORT_SYMBOL(omap_vram_alloc);
+
+void omap_vram_get_info(unsigned long *vram,
+		unsigned long *free_vram,
+		unsigned long *largest_free_block)
+{
+	struct vram_region *vr;
+	struct vram_alloc *va;
+
+	*vram = 0;
+	*free_vram = 0;
+	*largest_free_block = 0;
+
+	mutex_lock(&region_mutex);
+
+	list_for_each_entry(vr, &region_list, list) {
+		unsigned free;
+		unsigned long pa;
+
+		pa = vr->paddr;
+		*vram += vr->pages << PAGE_SHIFT;
+
+		list_for_each_entry(va, &vr->alloc_list, list) {
+			free = va->paddr - pa;
+			*free_vram += free;
+			if (free > *largest_free_block)
+				*largest_free_block = free;
+			pa = va->paddr + (va->pages << PAGE_SHIFT);
+		}
+
+		free = vr->paddr + (vr->pages << PAGE_SHIFT) - pa;
+		*free_vram += free;
+		if (free > *largest_free_block)
+			*largest_free_block = free;
+	}
+
+	mutex_unlock(&region_mutex);
+}
+EXPORT_SYMBOL(omap_vram_get_info);
+
+#if defined(CONFIG_DEBUG_FS)
+static int vram_debug_show(struct seq_file *s, void *unused)
+{
+	struct vram_region *vr;
+	struct vram_alloc *va;
+	unsigned size;
+
+	mutex_lock(&region_mutex);
+
+	list_for_each_entry(vr, &region_list, list) {
+		size = vr->pages << PAGE_SHIFT;
+		seq_printf(s, "%08lx-%08lx (%d bytes)\n",
+				vr->paddr, vr->paddr + size - 1,
+				size);
+
+		list_for_each_entry(va, &vr->alloc_list, list) {
+			size = va->pages << PAGE_SHIFT;
+			seq_printf(s, "    %08lx-%08lx (%d bytes)\n",
+					va->paddr, va->paddr + size - 1,
+					size);
+		}
+	}
+
+	mutex_unlock(&region_mutex);
+
+	return 0;
+}
+
+static int vram_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, vram_debug_show, inode->i_private);
+}
+
+static const struct file_operations vram_debug_fops = {
+	.open           = vram_debug_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int __init omap_vram_create_debugfs(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_file("vram", S_IRUGO, NULL,
+			NULL, &vram_debug_fops);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	return 0;
+}
+#endif
+
+static __init int omap_vram_init(void)
+{
+	int i;
+
+	vram_initialized = 1;
+
+	for (i = 0; i < postponed_cnt; i++)
+		omap_vram_add_region(postponed_regions[i].paddr,
+				postponed_regions[i].size);
+
+#ifdef CONFIG_DEBUG_FS
+	if (omap_vram_create_debugfs())
+		pr_err("VRAM: Failed to create debugfs file\n");
+#endif
+
+	return 0;
+}
+
+arch_initcall(omap_vram_init);
+
+/* boottime vram alloc stuff */
+
+/* set from board file */
+static u32 omap_vram_sram_start __initdata;
+static u32 omap_vram_sram_size __initdata;
+
+/* set from board file */
+static u32 omap_vram_sdram_start __initdata;
+static u32 omap_vram_sdram_size __initdata;
+
+/* set from kernel cmdline */
+static u32 omap_vram_def_sdram_size __initdata;
+static u32 omap_vram_def_sdram_start __initdata;
+
+static void __init omap_vram_early_vram(char **p)
+{
+	omap_vram_def_sdram_size = memparse(*p, p);
+	if (**p == ',')
+		omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16);
+}
+__early_param("vram=", omap_vram_early_vram);
+
+/*
+ * Called from map_io. We need to call to this early enough so that we
+ * can reserve the fixed SDRAM regions before VM could get hold of them.
+ */
+void __init omap_vram_reserve_sdram(void)
+{
+	struct bootmem_data	*bdata;
+	unsigned long		sdram_start, sdram_size;
+	u32 paddr;
+	u32 size = 0;
+
+	/* cmdline arg overrides the board file definition */
+	if (omap_vram_def_sdram_size) {
+		size = omap_vram_def_sdram_size;
+		paddr = omap_vram_def_sdram_start;
+	}
+
+	if (!size) {
+		size = omap_vram_sdram_size;
+		paddr = omap_vram_sdram_start;
+	}
+
+#ifdef CONFIG_OMAP2_VRAM_SIZE
+	if (!size) {
+		size = CONFIG_OMAP2_VRAM_SIZE * 1024 * 1024;
+		paddr = 0;
+	}
+#endif
+
+	if (!size)
+		return;
+
+	size = PAGE_ALIGN(size);
+
+	bdata = NODE_DATA(0)->bdata;
+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
+	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
+
+	if (paddr) {
+		if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
+				paddr + size > sdram_start + sdram_size) {
+			pr_err("Illegal SDRAM region for VRAM\n");
+			return;
+		}
+
+		if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
+			pr_err("FB: failed to reserve VRAM\n");
+			return;
+		}
+	} else {
+		if (size > sdram_size) {
+			pr_err("Illegal SDRAM size for VRAM\n");
+			return;
+		}
+
+		paddr = virt_to_phys(alloc_bootmem_pages(size));
+		BUG_ON(paddr & ~PAGE_MASK);
+	}
+
+	omap_vram_add_region(paddr, size);
+
+	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
+}
+
+/*
+ * Called at sram init time, before anything is pushed to the SRAM stack.
+ * Because of the stack scheme, we will allocate everything from the
+ * start of the lowest address region to the end of SRAM. This will also
+ * include padding for page alignment and possible holes between regions.
+ *
+ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
+ * this point, since the driver built as a module would have problem with
+ * freeing / reallocating the regions.
+ */
+unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart,
+				  unsigned long sram_vstart,
+				  unsigned long sram_size,
+				  unsigned long pstart_avail,
+				  unsigned long size_avail)
+{
+	unsigned long			pend_avail;
+	unsigned long			reserved;
+	u32 paddr;
+	u32 size;
+
+	paddr = omap_vram_sram_start;
+	size = omap_vram_sram_size;
+
+	if (!size)
+		return 0;
+
+	reserved = 0;
+	pend_avail = pstart_avail + size_avail;
+
+	if (!paddr) {
+		/* Dynamic allocation */
+		if ((size_avail & PAGE_MASK) < size) {
+			pr_err("Not enough SRAM for VRAM\n");
+			return 0;
+		}
+		size_avail = (size_avail - size) & PAGE_MASK;
+		paddr = pstart_avail + size_avail;
+	}
+
+	if (paddr < sram_pstart ||
+			paddr + size > sram_pstart + sram_size) {
+		pr_err("Illegal SRAM region for VRAM\n");
+		return 0;
+	}
+
+	/* Reserve everything above the start of the region. */
+	if (pend_avail - paddr > reserved)
+		reserved = pend_avail - paddr;
+	size_avail = pend_avail - reserved - pstart_avail;
+
+	omap_vram_add_region(paddr, size);
+
+	if (reserved)
+		pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
+
+	return reserved;
+}
+
+void __init omap_vram_set_sdram_vram(u32 size, u32 start)
+{
+	omap_vram_sdram_start = start;
+	omap_vram_sdram_size = size;
+}
+
+void __init omap_vram_set_sram_vram(u32 size, u32 start)
+{
+	omap_vram_sram_start = start;
+	omap_vram_sram_size = size;
+}
--- /dev/null
+++ b/drivers/video/omap2/vrfb.c
@@ -0,0 +1,277 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mutex.h>
+
+#include <mach/io.h>
+#include <mach/vrfb.h>
+#include <mach/sdrc.h>
+/*#define DEBUG*/
+
+#ifdef DEBUG
+#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
+#else
+#define DBG(format, ...)
+#endif
+
+#define SMS_ROT_VIRT_BASE(context, rot) \
+	(((context >= 4) ? 0xD0000000 : 0x70000000) \
+	 + (0x4000000 * (context)) \
+	 + (0x1000000 * (rot)))
+
+#define OMAP_VRFB_SIZE			(2048 * 2048 * 4)
+
+#define VRFB_PAGE_WIDTH_EXP	5 /* Assuming SDRAM pagesize= 1024 */
+#define VRFB_PAGE_HEIGHT_EXP	5 /* 1024 = 2^5 * 2^5 */
+#define VRFB_PAGE_WIDTH		(1 << VRFB_PAGE_WIDTH_EXP)
+#define VRFB_PAGE_HEIGHT	(1 << VRFB_PAGE_HEIGHT_EXP)
+#define SMS_IMAGEHEIGHT_OFFSET	16
+#define SMS_IMAGEWIDTH_OFFSET	0
+#define SMS_PH_OFFSET		8
+#define SMS_PW_OFFSET		4
+#define SMS_PS_OFFSET		0
+
+#define VRFB_NUM_CTXS 12
+/* bitmap of reserved contexts */
+static unsigned long ctx_map;
+/* bitmap of contexts for which we have to keep the HW context valid */
+static unsigned long ctx_map_active;
+
+static DEFINE_MUTEX(ctx_lock);
+
+/*
+ * Access to this happens from client drivers or the PM core after wake-up.
+ * For the first case we require locking at the driver level, for the second
+ * we don't need locking, since no drivers will run until after the wake-up
+ * has finished.
+ */
+static struct {
+	u32 physical_ba;
+	u32 control;
+	u32 size;
+} vrfb_hw_context[VRFB_NUM_CTXS];
+
+static inline void restore_hw_context(int ctx)
+{
+	omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
+	omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
+	omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+}
+
+void omap_vrfb_restore_context(void)
+{
+	int i;
+	unsigned long map = ctx_map_active;
+
+	for (i = ffs(map); i; i = ffs(map)) {
+		/* i=1..32 */
+		i--;
+		map &= ~(1 << i);
+		restore_hw_context(i);
+	}
+}
+
+void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp)
+{
+	*width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
+	*height = ALIGN(*height, VRFB_PAGE_HEIGHT);
+}
+EXPORT_SYMBOL(omap_vrfb_adjust_size);
+
+void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height,
+		unsigned bytespp, bool yuv_mode)
+{
+	unsigned pixel_size_exp;
+	u16 vrfb_width;
+	u16 vrfb_height;
+	u8 ctx = vrfb->context;
+	u32 size;
+	u32 control;
+
+	DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr,
+			width, height, color_mode);
+
+	/* For YUV2 and UYVY modes VRFB needs to handle pixels a bit
+	 * differently. See TRM. */
+	if (yuv_mode) {
+		bytespp *= 2;
+		width /= 2;
+	}
+
+	if (bytespp == 4)
+		pixel_size_exp = 2;
+	else if (bytespp == 2)
+		pixel_size_exp = 1;
+	else
+		BUG();
+
+	vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
+	vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT);
+
+	DBG("vrfb w %u, h %u bytespp %d\n", vrfb_width, vrfb_height, bytespp);
+
+	size  = vrfb_width << SMS_IMAGEWIDTH_OFFSET;
+	size |= vrfb_height << SMS_IMAGEHEIGHT_OFFSET;
+
+	control  = pixel_size_exp << SMS_PS_OFFSET;
+	control |= VRFB_PAGE_WIDTH_EXP  << SMS_PW_OFFSET;
+	control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
+
+	vrfb_hw_context[ctx].physical_ba = paddr;
+	vrfb_hw_context[ctx].size = size;
+	vrfb_hw_context[ctx].control = control;
+
+	omap2_sms_write_rot_physical_ba(paddr, ctx);
+	omap2_sms_write_rot_size(size, ctx);
+	omap2_sms_write_rot_control(control, ctx);
+
+	DBG("vrfb offset pixels %d, %d\n",
+			vrfb_width - width, vrfb_height - height);
+
+	vrfb->xoffset = vrfb_width - width;
+	vrfb->yoffset = vrfb_height - height;
+	vrfb->bytespp = bytespp;
+}
+EXPORT_SYMBOL(omap_vrfb_setup);
+
+void omap_vrfb_release_ctx(struct vrfb *vrfb)
+{
+	int rot;
+	int ctx = vrfb->context;
+
+	if (ctx == 0xff)
+		return;
+
+	DBG("release ctx %d\n", ctx);
+
+	mutex_lock(&ctx_lock);
+
+	BUG_ON(!(ctx_map & (1 << ctx)));
+
+	clear_bit(ctx, &ctx_map_active);
+	clear_bit(ctx, &ctx_map);
+
+	for (rot = 0; rot < 4; ++rot) {
+		if (vrfb->paddr[rot]) {
+			release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE);
+			vrfb->paddr[rot] = 0;
+		}
+	}
+
+	vrfb->context = 0xff;
+
+	mutex_unlock(&ctx_lock);
+}
+EXPORT_SYMBOL(omap_vrfb_release_ctx);
+
+int omap_vrfb_request_ctx(struct vrfb *vrfb)
+{
+	int rot;
+	u32 paddr;
+	u8 ctx;
+	int r;
+
+	DBG("request ctx\n");
+
+	mutex_lock(&ctx_lock);
+
+	for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+		if ((ctx_map & (1 << ctx)) == 0)
+			break;
+
+	if (ctx == VRFB_NUM_CTXS) {
+		pr_err("vrfb: no free contexts\n");
+		r = -EBUSY;
+		goto out;
+	}
+
+	DBG("found free ctx %d\n", ctx);
+
+	set_bit(ctx, &ctx_map);
+	WARN_ON(ctx_map_active & (1 << ctx));
+	set_bit(ctx, &ctx_map_active);
+
+	memset(vrfb, 0, sizeof(*vrfb));
+
+	vrfb->context = ctx;
+
+	for (rot = 0; rot < 4; ++rot) {
+		paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+		if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
+			pr_err("vrfb: failed to reserve VRFB "
+					"area for ctx %d, rotation %d\n",
+					ctx, rot * 90);
+			omap_vrfb_release_ctx(vrfb);
+			r = -ENOMEM;
+			goto out;
+		}
+
+		vrfb->paddr[rot] = paddr;
+
+		DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]);
+	}
+
+	r = 0;
+out:
+	mutex_unlock(&ctx_lock);
+	return r;
+}
+EXPORT_SYMBOL(omap_vrfb_request_ctx);
+
+void omap_vrfb_suspend_ctx(struct vrfb *vrfb)
+{
+	DBG("suspend ctx %d\n", vrfb->context);
+	mutex_lock(&ctx_lock);
+
+	BUG_ON(vrfb->context >= VRFB_NUM_CTXS);
+	BUG_ON(!((1 << vrfb->context) & ctx_map_active));
+
+	clear_bit(vrfb->context, &ctx_map_active);
+	mutex_unlock(&ctx_lock);
+}
+EXPORT_SYMBOL(omap_vrfb_suspend_ctx);
+
+void omap_vrfb_resume_ctx(struct vrfb *vrfb)
+{
+	DBG("resume ctx %d\n", vrfb->context);
+	mutex_lock(&ctx_lock);
+
+	BUG_ON(vrfb->context >= VRFB_NUM_CTXS);
+	BUG_ON((1 << vrfb->context) & ctx_map_active);
+
+	/*
+	 * omap_vrfb_restore_context is normally called by the core domain
+	 * save / restore logic, but since this VRFB context was suspended
+	 * those calls didn't actually restore the context and now we might
+	 * have an invalid context. Do an explicit restore here.
+	 */
+	restore_hw_context(vrfb->context);
+	set_bit(vrfb->context, &ctx_map_active);
+	mutex_unlock(&ctx_lock);
+}
+EXPORT_SYMBOL(omap_vrfb_resume_ctx);
+
--- /dev/null
+++ b/include/linux/omapfb.h
@@ -0,0 +1,242 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __LINUX_OMAPFB_H__
+#define __LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+#ifdef __KERNEL__
+
+#include <mach/board.h>
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
+	unsigned	format_used:1;	/* Must be set when format is set.
+					 * Needed b/c of the badly chosen 0
+					 * base for OMAPFB_COLOR_* values
+					 */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+extern void omapfb_reserve_sdram(void);
+
+#endif
+
+#endif /* __OMAPFB_H */