openwrt/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

348 lines
5.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ALFA Network AP120C-AC";
compatible = "alfa-network,ap120c-ac";
aliases {
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
status: status {
label = "ap120c-ac:blue:status";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan {
label = "ap120c-ac:amber:wan";
gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "ap120c-ac:green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "ap120c-ac:red:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qca8075: ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
#gpio-cells = <2>;
gpio-controller;
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_i2c3 {
status = "okay";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 4 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition@180000 {
label = "priv_data1";
reg = <0x00180000 0x00010000>;
read-only;
};
partition@190000 {
label = "priv_data2";
reg = <0x00190000 0x00010000>;
read-only;
};
};
};
nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs1";
reg = <0x00000000 0x04000000>;
};
partition@4000000 {
label = "rootfs2";
reg = <0x04000000 0x04000000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
vlan_tag = <2 0x20>;
};
&tlmm {
i2c0_pins: i2c0_pinmux {
mux_i2c {
function = "blsp_i2c0";
pins = "gpio58", "gpio59";
drive-strength = <16>;
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_mdio {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_mdc {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial0_pins: serial0_pinmux {
mux_uart {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi0_pins: spi0_pinmux {
mux_spi {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio4";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};