openwrt/target/linux/ramips/dts/M3.dts

107 lines
1.7 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "M3", "ralink,rt5350-soc";
model = "Poray M3";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
ralink,gpiomux = "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32";
reg = <0 0>;
linux,modalias = "m25p80", "w25q32";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
ralink,led_polarity = <1>;
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "m3:blue:status";
gpios = <&gpio0 9 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
mode {
label = "mode";
gpios = <&gpio0 17 1>;
linux,code = <0x100>;
linux,input-type = <5>;
};
};
wmac@10180000 {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};