2013-01-08 22:20:16 +00:00
|
|
|
#
|
2015-02-05 16:31:52 +00:00
|
|
|
# Copyright (C) 2012-2015 OpenWrt.org
|
2013-01-08 22:20:16 +00:00
|
|
|
#
|
|
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
|
|
# See /LICENSE for more information.
|
|
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
|
|
|
|
BOARD:=mvebu
|
mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
|
|
|
BOARDNAME:=Marvell EBU Armada
|
2019-03-28 17:07:05 +00:00
|
|
|
FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk boot-part rootfs-part
|
2018-03-26 09:37:58 +00:00
|
|
|
SUBTARGETS:=cortexa9 cortexa53 cortexa72
|
2013-01-08 22:20:16 +00:00
|
|
|
|
2020-05-28 16:46:47 +00:00
|
|
|
KERNEL_PATCHVER:=5.4
|
2020-03-04 12:46:23 +00:00
|
|
|
KERNEL_TESTING_PATCHVER:=5.4
|
2013-01-08 22:20:16 +00:00
|
|
|
|
|
|
|
include $(INCLUDE_DIR)/target.mk
|
|
|
|
|
2016-05-21 17:09:59 +00:00
|
|
|
DEFAULT_PACKAGES += uboot-envtools kmod-gpio-button-hotplug
|
2013-01-08 22:20:16 +00:00
|
|
|
|
|
|
|
$(eval $(call BuildTarget))
|