hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/ar71xx/image/legacy.mk

1060 lines
51 KiB
Makefile
Raw Normal View History

ar71xx: remove obsolete jffs2 image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-23 09:21:07 +00:00
rootfs_type=$(patsubst squashfs-%,squashfs,$(1))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
# $(1): rootfs type.
# $(2): board name.
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define factoryname
$(call imgname,$(1),$(2))-factory.bin
endef
COMMA:=,
define mkcmdline
$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
endef
define mtdpartsize
$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
endef
# $(1) : name of image build method to be used, e.g., AthLzma.
# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
# $(3) : name of the profile to be defined.
# $(4) : board name.
# $(5)~$(7) : arguments for $(mkcmdline)
# board=$(1) console=$(2),$(3)
# $(8)~$(14): extra arguments.
define SingleProfile
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
define Image/Build/Profile/$(3)
$$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
endef
endef
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
# $(1): input file.
# $(2): output file.
# $(3): extra arguments for lzma.
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
endef
define PatchKernel
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
endef
define PatchKernel/initramfs
$(call PatchKernel,$(1),$(2),-initramfs)
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra argumetns for lzma.
# $(4): name suffix, e.g. "-initramfs".
define PatchKernelLzma
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
$(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
endef
define PatchKernelGzip
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
endef
ifneq ($(SUBTARGET),mikrotik)
# $(1): compression method of the data.
# $(2): extra arguments.
# $(3): input data file.
# $(4): output file.
define MkuImage
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
-e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-d $(3) $(4)
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra arguments for lzma.
# $(4): name suffix, e.g. "-initramfs".
# $(5): extra arguments for mkimage.
define MkuImageLzma
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
define MkuImageLzma/initramfs
$(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
$(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageGzip
$(call PatchKernelGzip,$(1),$(2))
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
endef
define MkuImageGzip/initramfs
$(call PatchKernelGzip,$(1),$(2),-initramfs)
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageOKLI
$(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
endef
endif
# $(1): name of the 1st file.
# $(2): size limit of the 1st file if it is greater than 262144, or
# the erase size of the flash if it is greater than zero and less
# than 262144
# $(3): name of the 2nd file.
# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
# it is the size limit of the output file
# $(5): name of the output file.
# $(6): padding size.
define CatFiles
if [ $(2) -eq 0 ]; then \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
filename="$(3)"; fstype=$${filename##*\.}; \
case "$${fstype}" in \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
*) bs=`stat -c%s $(1)`;; \
esac; \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -n "$(6)" ]; then \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
case "$${fstype}" in \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
squashfs*) \
padjffs2 $(5) $(6); \
;; \
esac; \
fi; \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
else if [ $(2) -gt 262144 ]; then \
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
fi; fi; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
fi; fi
endef
# $(1): rootfs type.
# $(2): board name.
# $(3): kernel image size limit.
# $(4): rootfs image size limit.
# $(5): padding argument for padjffs2.
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
# $(1): ubinize ini file
# $(2): working directory
# $(3): output file
# $(4): physical erase block size
# $(5): minimum I/O unit size
# $(6): custom options
define ubinize
$(CP) $(1) $(2)
( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
endef
#
# Embed lzma-compressed kernel inside lzma-loader.
#
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
# $(2), suffix of target file to build, e.g. bin, gz, elf
# $(3), kernel command line to pass from lzma-loader to kernel
# $(4), unused here
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
define Image/BuildLoader
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
compile loader.$(2)
ar71xx: fix legacy image build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 20:00:47 +00:00
-$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
endef
#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
#
# $(4), offset into the flash space to start searching uImage magic "OKLI".
# $(5), size of search range starting at $(4). With 0 as the value, uImage
# header is expected to be at precisely $(4)
define Image/BuildLoaderAlone
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
compile loader.$(2)
endef
define Build/Clean
$(LOADER_MAKE) clean
endef
alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
ar71xx: use common firmware partition for WNDAP360 Patch from https://github.com/openwrt/openwrt/pull/398 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-19 13:40:10 +00:00
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
ar71xx: Add support for Netgear WNR2000v1 This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
2016-12-12 21:25:01 +00:00
wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
ar71xx: mark U-Boot and radio calibration data partitions as read-only General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-08-24 13:42:20 +00:00
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
ar71xx: fix bug in NBG6716 kernelpacking, add firmware partition -Fix the kernel image generation (more robust) -Add a firmware partition table allowing easy upgrade to ath79 Signed-off-by: André Valentin <avalentin@marcant.net>
2019-10-23 09:30:29 +00:00
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k@0x0(zyxel_rfsd),2048k@0x200000(romd),1024k@0x400000(header),2048k@0x500000(kernel),125952k@0x500000(firmware),-@0x700000(ubi)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
cp $(KDIR)/vmlinux $(VMLINUX).bin
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
$(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
-mkdir -p $(KDIR_TMP)
endef
define Image/BuildKernel/Initramfs
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
$(call Image/Build/Initramfs)
endef
Revert "ar71xx: wrt400n: lift size limit on kernel and rootfs part" This reverts commit 78c2ec0f477bab5b5c2622b5a18c14e51dea7249. The builders were failing with a segfault when generating the image Signed-off-by: John Crispin <john@phrozen.org>
2017-01-20 05:39:35 +00:00
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
define Image/Build/WRT400N
$(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
fi
endef
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
define Image/Build/CameoAP94/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4))
$(call MkuImageLzma,$(2)-fat,$(3) $(5))
endef
define Image/Build/CameoAP94
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=$(call sysupname,$(1),$(2)); \
echo -n "$(6)"; \
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
else \
( \
dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
echo -n "$(7)"; \
) > $(call factoryname,$(1),$(2)); \
fi; \
fi
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR_TMP)/$(2)-fat.bin" \
"$(KDIR_TMP)/$(2)-fat.dummy" \
$(call sysupname,$(1),$(2)-fat); \
fi
endef
define Image/Build/WZRHP
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/WHRHPG300N
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
define Image/Build/Cameo
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
factory_size=$$(($(fwsize) - $(6))); \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
( \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
echo -n $(5); \
) > $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
define Image/Build/CameoHornet
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
for r in $(7); do \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
[ -n "$$r" ] && dashr="-$$r" || dashr=; \
[ -z "$$r" ] && r="DEF"; \
mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-K $(8) -I $(fwsize) \
-k "$(call sysupname,$(1),$(2))" \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
-o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
true; \
done; \
fi
endef
Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
define Image/Build/dLAN
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
endef
Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Ath
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
endef
Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Belkin
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-n "uImage" \
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
-o $(KDIR_TMP)/$(2)-uImage; \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-n "rootfs" \
-i $(KDIR)/root.$(1) \
-o $(KDIR_TMP)/$(2)-rootfs; \
( \
dd if=$(KDIR_TMP)/$(2)-rootfs; \
dd if=$(KDIR_TMP)/$(2)-uImage; \
) > "$(call factoryname,$(1),$(2))"; \
fi
endef
define Image/Build/EnGenius
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mksenaofw -e $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.dlf \
-r 0x101 -p $(7) -t 2; \
fi
endef
Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/PB4X
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(call imgname,kernel,$(2)).bin" \
"$(call imgname,$(1),$(2)-rootfs).bin" \
$(call sysupname,$(1),$(2))
endef
Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
define Image/Build/MyLoader
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
if [ -e "$(fwimage)" ]; then \
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
-p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
$(call imgname,$(1),$(2))-$(5)-factory.img; \
echo -n "" > $(KDIR_TMP)/empty.bin; \
sh $(TOPDIR)/scripts/combined-image.sh \
$(fwimage) $(KDIR_TMP)/empty.bin \
$(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
fi
endef
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
define Image/Build/Planex/buildkernel
[ -e "$(KDIR)/loader-$(2).gz" ]
$(call MkuImageOKLI,$(2))
( \
dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
) > $(KDIR_TMP)/kernel-$(2).bin
$(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
define Image/Build/Planex
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
-v 2.00.00 \
-i $(call sysupname,$(1),$(2)) \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/ALFA
$(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
rm -rf $(KDIR)/$(1); \
mkdir -p $(KDIR)/$(1); \
cd $(KDIR)/$(1); \
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
ar71xx/image: make tar calls reproducible Use --mtime when SOURCE_DATE_EPOCH is set. Use gzip -n9z instead of tar z to remove timestamp in gzip header. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-06-18 19:30:30 +00:00
$(TAR) c \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-C $(KDIR)/$(1) $(7) $(8) \
| gzip -9nc > $(call factoryname,$(1),$(2)); \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
( \
echo WRM7222C | dd bs=32 count=1 conv=sync; \
echo -ne '\xfe'; \
) >> $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Senao
mkdir -p $(KDIR_TMP)/$(2)/
touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
-$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
( \
cd $(KDIR_TMP)/$(2)/; \
ar71xx/image: make tar calls reproducible Use --mtime when SOURCE_DATE_EPOCH is set. Use gzip -n9z instead of tar z to remove timestamp in gzip header. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-06-18 19:30:30 +00:00
$(TAR) -c \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
* | gzip -9nc > $(call factoryname,$(1),$(2)) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
)
-rm -rf $(KDIR_TMP)/$(2)/
-sh $(TOPDIR)/scripts/combined-image.sh \
$(KDIR_TMP)/vmlinux-$(2).uImage \
$(KDIR)/root.$(1) \
$(call sysupname,$(1),$(2))
endef
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
ar71xx: Ignore firmware building errors of UBNT and CyberTAN devices Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-10-06 06:27:49 +00:00
-$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
ar71xx: Ignore firmware building errors of UBNT and CyberTAN devices Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-10-06 06:27:49 +00:00
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-i $(KDIR)/image.tmp \
-o $(call sysupname,$(1),$(2))
ar71xx: Ignore firmware building errors of UBNT and CyberTAN devices Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-10-06 06:27:49 +00:00
-$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-i $(KDIR)/image.tmp \
-o $(call factoryname,$(1),$(2))
ar71xx: Ignore firmware building errors of UBNT and CyberTAN devices Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-10-06 06:27:49 +00:00
-rm $(KDIR)/image.tmp
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
endef
Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
define Image/Build/Netgear/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-rm -rf $(KDIR_TMP)/$(2)
mkdir -p $(KDIR_TMP)/$(2)/image
cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
-noappend -root-owned -be -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
( \
cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
dd if=/dev/zero bs=1k count=1 \
) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
mkimage -A mips -O linux -T filesystem -C none -M $(5) \
-a 0xbf070000 -e 0xbf070000 \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
-n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
endef
define Image/Build/Netgear
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
if [ -e $(call sysupname,$(1),$(2)) ]; then \
for r in $(7) ; do \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
[ -n "$$r" ] && dashr="-$$r" || dashr= ; \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(STAGING_DIR_HOST)/bin/mkdniimg \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
-B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-i $(call sysupname,$(1),$(2)) \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
-o $(call imgname,$(1),$(2))-factory$$dashr.img; \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
done; \
fi
ar71xx: Add support for Netgear WNR2000v1 This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
2016-12-12 21:25:01 +00:00
if [ "$2" = "wnr2000" ]; then \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
fi
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
endef
Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
define Image/Build/NetgearLzma
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
endef
Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
# $(1): (empty)
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
define Image/Build/NetgearNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
bs=$$(($(kernelsize)-131072-2*64-1)) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
count=1 conv=sync
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
# create a fake rootfs image
dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
mkimage -A mips -O linux -T filesystem -C none \
-a 0xbf070000 -e 0xbf070000 \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
-n 'MIPS $(VERSION_DIST) fakeroot' \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-d $(KDIR_TMP)/fakeroot-$(2) \
-M $(5) \
$(KDIR_TMP)/fakeroot-$(2).uImage
# append the fake rootfs image to the kernel, it will reside in the last
# erase block of the kernel partition
cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
endef
# $(1): rootfs image suffix
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
# $(6): Board name (upper caps)
# $(7): firmware region code (not used yet)
# $(8): DNI Hardware version
# $(9): suffix of the configuration file for ubinize
define Image/Build/NetgearNAND
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
$(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
$(STAGING_DIR_HOST)/bin/mkdniimg \
build: replace uses of OpenWrt with $(VERSION_DIST) This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-08 17:40:37 +00:00
-B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-i $(imageraw) \
-o $(call imgname,ubi,$(2))-factory.img
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin
ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
define Image/Build/ZyXEL
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
if [ ! -f $(ZYXEL_UBOOT) ]; then \
echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
else \
$(STAGING_DIR_HOST)/bin/mkzynfw \
-B $(4) \
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
-b $(ZYXEL_UBOOT) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-r $(call sysupname,$(1),$(2)):0x10000 \
-o $(call factoryname,$(1),$(2)); \
fi; fi
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
endef
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
ar71xx: fix bug in NBG6716 kernelpacking, add firmware partition -Fix the kernel image generation (more robust) -Add a firmware partition table allowing easy upgrade to ath79 Signed-off-by: André Valentin <avalentin@marcant.net>
2019-10-23 09:30:29 +00:00
# attention: only zlib compression is allowed for the boot fs
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
define Image/Build/ZyXELNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
$(call MkuImageLzma,$(2),$(3) $(5) $(6))
mkdir -p $(KDIR_TMP)/$(2)/image/boot
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
ar71xx: fix bug in NBG6716 kernelpacking, add firmware partition -Fix the kernel image generation (more robust) -Add a firmware partition table allowing easy upgrade to ath79 Signed-off-by: André Valentin <avalentin@marcant.net>
2019-10-23 09:30:29 +00:00
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
-d $(KDIR_TMP)/$(2)/image \
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
2>&1 1>/dev/null | awk '/^.+$$/'
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-rm -rf $(KDIR_TMP)/$(2)
endef
define Image/Build/ZyXELNAND
if [ "$(1)" != "squashfs" ]; then \
echo Only squashfs is supported; \
return 0; \
fi
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
bs=128k conv=sync
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
endef
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
ar71xx: Add support for initramfs images for OpenMesh devices Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-17 15:51:33 +00:00
Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
define Image/Build/OpenMesh
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(4)" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" \
"$(KDIR)/root.$(1)"
-sh $(TOPDIR)/scripts/combined-ext-image.sh \
"$(4)" "$(call factoryname,$(1),$(2))" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
"$(KDIR)/root.$(1)" "rootfs"
ar71xx: Generate sysupgrade images for OpenMesh devices Some OpenWrt based firmwares like Gluon expect that a sysupgrade image exists when a device firmware can be updated via sysupgrade. This image wasn't created until now because OpenMesh devices use the same image for factory and sysupgrade flash. Copying the image from *factory.bin to *sysupgrade.bin is therefore enough to make the sysupgrade functionality visible. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-17 15:51:34 +00:00
if [ -e "$(call factoryname,$(1),$(2))" ]; then \
cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
fi
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
endef
Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Zcomax
$(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkzcfw \
-B $(2) \
-k $(KDIR_TMP)/vmlinux-$(2).uImage \
ar71xx: remove split kernel/rootfs images where the sysupgrade image can be written to flash directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-29 09:05:46 +00:00
-r $(KDIR)/root.$(1) \
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
-o $(call imgname,$(1),$(2))-factory.img; \
fi
endef
# $(1): template name to be defined.
# $(2): squashfs suffix to be used.
define BuildTemplate
# $(1) : name of build method.
# $(2) : board name.
# $(3) : kernel command line.
# $(4)~$(8): extra arguments.
define Image/Build/Template/$(1)/initramfs
$$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/loader
$$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/buildkernel
$$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/squashfs
$$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
endef
$(eval $(call BuildTemplate,squashfs-only))
ar71xx: remove obsolete jffs2 image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-23 09:21:07 +00:00
$(eval $(call BuildTemplate,64k,-64k))
$(eval $(call BuildTemplate,64kraw,-raw))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
ar71xx: remove obsolete jffs2 image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-23 09:21:07 +00:00
$(eval $(call BuildTemplate,128k))
$(eval $(call BuildTemplate,128kraw,-raw))
$(eval $(call BuildTemplate,256k))
$(eval $(call BuildTemplate,all))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
ifeq ($(SUBTARGET),generic)
$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
ar71xx: use common firmware partition for WNDAP360 Patch from https://github.com/openwrt/openwrt/pull/398 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-19 13:40:10 +00:00
$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
ar71xx: Added missing support for Linksys E2100L It's based on the WRT160NL according to https://wiki.openwrt.org/toh/linksys/e2100l Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244 and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch was conceived. Signed-off-by: Gad Krumholz <gad.krumholz@gmail.com> [Jo-Philipp Wich: fix ordering, move addpattern change into separate commit] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-27 06:52:53 +00:00
$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536))
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
ar71xx: create profile and build image for the OpenMesh A60 board Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-08-09 14:10:16 +00:00
$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
Revert "ar71xx: wrt400n: lift size limit on kernel and rootfs part" This reverts commit 78c2ec0f477bab5b5c2622b5a18c14e51dea7249. The builders were failing with a segfault when generating the image Signed-off-by: John Crispin <john@phrozen.org>
2017-01-20 05:39:35 +00:00
$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices This new subtarget sets the small_flash flag and removes unused kernel configuration. small_flash removes KERNEL_KALLSYMS, which saves ~107KB in the default configuration; removing unneeded hardware support from ar71xx/tiny saves another ~18KB (both after LZMA). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 15:36:13 +00:00
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),tiny)
ar71xx: Move F9K1115v2 under ar71xx tiny target F9K1115v2 has a kernel partition size of 1408 kB. Since kernel 4.9.x+ the kernel image for this device compiled had exceeded the kernel partition size limit and thus failing size check. The kernel image generated for this device under ar71xx tiny target is 1329.67 kB < 1408 kB. Signed-off-by: Kin Chan <kcchan1@outlook.com>
2018-03-05 07:30:56 +00:00
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices This new subtarget sets the small_flash flag and removes unused kernel configuration. small_flash removes KERNEL_KALLSYMS, which saves ~107KB in the default configuration; removing unneeded hardware support from ar71xx/tiny saves another ~18KB (both after LZMA). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 15:36:13 +00:00
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices This new subtarget sets the small_flash flag and removes unused kernel configuration. small_flash removes KERNEL_KALLSYMS, which saves ~107KB in the default configuration; removing unneeded hardware support from ar71xx/tiny saves another ~18KB (both after LZMA). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 15:36:13 +00:00
endif # ifeq ($(SUBTARGET),tiny)
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
ifeq ($(SUBTARGET),nand)
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
endif # ifeq ($(SUBTARGET),nand)
define Image/Build/squashfs
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
define Image/Prepare
uboot-ar71xx: switch to using u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 07:23:55 +00:00
$(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT))
ar71xx: split legacy image building code into a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:04:50 +00:00
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
$(call Image/BuildLoader,generic,elf,,,-initramfs)
endif
$(call Image/BuildLoader,generic,elf)
endef
ar71xx: convert OM2P to device profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 15:59:37 +00:00
define Image/Prepare/Profile
$(call Image/Build/Profile/$(1),loader)
endef
define Image/Build/Profile
$(call Image/Build/Profile/$(1),buildkernel)
ar71xx: fix build error when initramfs is disabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-13 16:34:52 +00:00
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
ar71xx: convert OM2P to device profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 15:59:37 +00:00
$(call Image/Build/Profile/$(1),$(2))
endef
ar71xx: further legacy image build fixes - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-27 13:03:57 +00:00
# $(1): filesystem type.
define Image/Build
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
endef