openwrt/target/linux/generic/patches-3.0/050-linux-atm_nathan.patch

From: Nathan Williams <nathan@traverse.com.au>
To: netdev@vger.kernel.org
Date: Wed, 05 Oct 2011 15:43:30 +1100
Cc: linux-atm-general@lists.sourceforge.net,
        David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
Subject: [Linux-ATM-General] [PATCH 1/4] atm: solos-pci: Add AnnexA/M
	capability attributes

BisACapability and BisMCapability allow users to
force either Annex A or Annex M.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
---
 drivers/atm/solos-attrlist.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c
index 9a676ee..8092533 100644
--- a/drivers/atm/solos-attrlist.c
+++ b/drivers/atm/solos-attrlist.c
@@ -71,6 +71,8 @@ SOLOS_ATTR_RW(BisAForceSNRMarginDn)
 SOLOS_ATTR_RW(BisMForceSNRMarginDn)
 SOLOS_ATTR_RW(BisAMaxMargin)
 SOLOS_ATTR_RW(BisMMaxMargin)
+SOLOS_ATTR_RW(BisACapability)
+SOLOS_ATTR_RW(BisMCapability)
 SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
 SOLOS_ATTR_RW(AnnexAMaxMargin)
 SOLOS_ATTR_RW(AnnexMMaxMargin)

From: Nathan Williams <nathan@traverse.com.au>
To: netdev@vger.kernel.org
Date: Wed, 05 Oct 2011 15:44:17 +1100
Cc: linux-atm-general@lists.sourceforge.net,
        David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
Subject: [Linux-ATM-General] [PATCH 2/4] atm: solos-pci: Remove annoying
	line of debugging

"len: %d" isn't particularly useful for anyone and confuses users.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
---
 drivers/atm/solos-pci.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 5d1d076..bd01aa3 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -452,7 +452,6 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 
 	len = skb->len;
 	memcpy(buf, skb->data, len);
-	dev_dbg(&card->dev->dev, "len: %d\n", len);
 
 	kfree_skb(skb);
 	return len;
From: Nathan Williams <nathan@traverse.com.au>
To: netdev@vger.kernel.org
Date: Wed, 05 Oct 2011 15:45:15 +1100
Cc: linux-atm-general@lists.sourceforge.net,
        David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
Subject: [Linux-ATM-General] [PATCH 3/4] atm: solos-pci: Add support for
	Geos GPIO pins

Geos ADSL2+ routers have on-board Solos chipsets with some
extra I/O pins and a push button connected to the FPGA.

PCB version and variant numbers are also made available
through the HardwareVersion and HardwareVariant attributes.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
---
 drivers/atm/solos-pci.c |   98 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 98 insertions(+), 0 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index bd01aa3..33c0c2b 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -56,6 +56,7 @@
 #define FLASH_BUSY	0x60
 #define FPGA_MODE	0x5C
 #define FLASH_MODE	0x58
+#define GPIO_STATUS	0x54
 #define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
 #define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
 
@@ -498,6 +499,87 @@ static ssize_t console_store(struct device *dev, struct device_attribute *attr,
 	return err?:count;
 }
 
+struct geos_gpio {
+	char *name;
+	int offset;
+};
+
+static struct geos_gpio geos_gpio_pins[] = {
+	{"GPIO1", 9},
+	{"GPIO2", 10},
+	{"GPIO3", 11},
+	{"GPIO4", 12},
+	{"GPIO5", 13},
+	{"PushButton", 14},
+	{NULL, 0}
+};
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	uint32_t data32;
+
+	struct geos_gpio *p = geos_gpio_pins;
+	while(p->name){
+		if(!strcmp(attr->attr.name, p->name)){
+			break;
+		}
+		p++;
+	}
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	if(buf[0] == '1'){
+		data32 |= 1 << p->offset;
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	} else if(buf[0] == '0') {
+		data32 &= ~(1 << p->offset);
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	}
+	return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	uint32_t data32;
+
+	struct geos_gpio *p = geos_gpio_pins;
+	while(p->name){
+		if(!strcmp(attr->attr.name, p->name)){
+			break;
+		}
+		p++;
+	}
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	data32 = (data32 >> p->offset) & 1;
+
+	return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	uint32_t data32;
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	if(!strcmp(attr->attr.name, "HardwareVersion")){
+		data32 = data32 & 0x1F;
+		return sprintf(buf, "%d\n", data32);
+	} else if(!strcmp(attr->attr.name, "HardwareVariant")){
+		data32 = (data32 >> 5) & 0x0F;
+		return sprintf(buf, "%d\n", data32);
+	}
+
+	return sprintf(buf, "Error\n");
+}
+
 static DEVICE_ATTR(console, 0644, console_show, console_store);
 
 
@@ -506,6 +588,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
 
 #include "solos-attrlist.c"
 
+static DEVICE_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store);
+static DEVICE_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store);
+static DEVICE_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store);
+static DEVICE_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store);
+static DEVICE_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store);
+static DEVICE_ATTR(PushButton, 0444, geos_gpio_show, NULL);
+static DEVICE_ATTR(HardwareVersion, 0444, hardware_show, NULL);
+static DEVICE_ATTR(HardwareVariant, 0444, hardware_show, NULL);
 #undef SOLOS_ATTR_RO
 #undef SOLOS_ATTR_RW
 
@@ -514,6 +604,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
 
 static struct attribute *solos_attrs[] = {
 #include "solos-attrlist.c"
+	&dev_attr_GPIO1.attr,
+	&dev_attr_GPIO2.attr,
+	&dev_attr_GPIO3.attr,
+	&dev_attr_GPIO4.attr,
+	&dev_attr_GPIO5.attr,
+	&dev_attr_PushButton.attr,
+	&dev_attr_HardwareVersion.attr,
+	&dev_attr_HardwareVariant.attr,
 	NULL
 };
 
From: Nathan Williams <nathan@traverse.com.au>
To: netdev@vger.kernel.org
Date: Wed, 05 Oct 2011 15:46:08 +1100
Cc: linux-atm-general@lists.sourceforge.net,
        David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
Subject: [Linux-ATM-General] [PATCH 4/4] atm: solos-pci: M25P/M25PE SPI
	flash support

Newer Geos ADSL2+ routers have different SPI flash.
The FPGA on these boards require driver version = 1 to enable
flash upgrades so old drivers can't corrupt new boards.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
---
 drivers/atm/solos-pci.c |   51 ++++++++++++++++++++++++++++++++++++----------
 1 files changed, 40 insertions(+), 11 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 33c0c2b..2a75bf7 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -42,7 +42,8 @@
 #include <linux/swab.h>
 #include <linux/slab.h>
 
-#define VERSION "0.07"
+#define VERSION "1.0"
+#define DRIVER_VERSION 0x01
 #define PTAG "solos-pci"
 
 #define CONFIG_RAM_SIZE	128
@@ -57,16 +58,20 @@
 #define FPGA_MODE	0x5C
 #define FLASH_MODE	0x58
 #define GPIO_STATUS	0x54
+#define DRIVER_VER	0x50
 #define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
 #define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
 
 #define DATA_RAM_SIZE	32768
 #define BUF_SIZE	2048
 #define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE	528 /* FPGA flash page size*/
-#define SOLOS_PAGE	512 /* Solos flash page size*/
-#define FPGA_BLOCK	(FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK	(SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE	528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE	512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK	(ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK	(ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK	(256 * 64)
 
 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -128,6 +133,7 @@ struct solos_card {
 	int using_dma;
 	int fpga_version;
 	int buffer_size;
+	int atmel_flash;
 };
 
 
@@ -631,16 +637,25 @@ static int flash_upgrade(struct solos_card *card, int chip)
 	switch (chip) {
 	case 0:
 		fw_name = "solos-FPGA.bin";
-		blocksize = FPGA_BLOCK;
+		if (card->atmel_flash)
+			blocksize = ATMEL_FPGA_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
 		break;
 	case 1:
 		fw_name = "solos-Firmware.bin";
-		blocksize = SOLOS_BLOCK;
+		if (card->atmel_flash)
+			blocksize = ATMEL_SOLOS_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
 		break;
 	case 2:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-db-FPGA.bin";
-			blocksize = FPGA_BLOCK;
+			if (card->atmel_flash)
+				blocksize = ATMEL_FPGA_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
 		} else {
 			dev_info(&card->dev->dev, "FPGA version doesn't support"
 					" daughter board upgrades\n");
@@ -650,7 +665,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
 	case 3:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-Firmware.bin";
-			blocksize = SOLOS_BLOCK;
+			if (card->atmel_flash)
+				blocksize = ATMEL_SOLOS_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
 		} else {
 			dev_info(&card->dev->dev, "FPGA version doesn't support"
 					" daughter board upgrades\n");
@@ -695,9 +713,13 @@ static int flash_upgrade(struct solos_card *card, int chip)
 		/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
 		iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 
-		/* Copy block to buffer, swapping each 16 bits */
+		/* Copy block to buffer, swapping each 16 bits for Atmel flash */
 		for(i = 0; i < blocksize; i += 4) {
-			uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+			uint32_t word;
+			if (card->atmel_flash)
+				word = swahb32p((uint32_t *)(fw->data + offset + i));
+			else
+				word = *(uint32_t *)(fw->data + offset + i);
 			if(card->fpga_version > LEGACY_BUFFERS)
 				iowrite32(word, FLASH_BUF + i);
 			else
@@ -1249,6 +1271,11 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		db_fpga_upgrade = db_firmware_upgrade = 0;
 	}
 
+	/* Stopped using Atmel flash after 0.03-38 */
+	if (fpga_ver < 39)
+		card->atmel_flash = 1;
+	else
+		card->atmel_flash = 0;
 	if (card->fpga_version >= DMA_SUPPORTED){
 		card->using_dma = 1;
 	} else {
@@ -1256,6 +1283,8 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		/* Set RX empty flag for all ports */
 		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
 	}
+	/* New FPGAs require driver version before permitting flash upgrades */
+	iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
 
 	data32 = ioread32(card->config_regs + PORTS);
 	card->nr_ports = (data32 & 0x000000FF);