openwrt/package/kernel/mac80211/patches/900-rtlwifi-Fix-build-errors-for-unusual-cases.patch

From 6f334c2b3966f10cbd089bb124ec0e114d8d8c77 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 12 Jul 2013 15:32:15 -0500
Subject: [PATCH] rtlwifi: Fix build errors for unusual cases

The present build configuration for the rtlwifi family of drivers will
fail under two known conditions:

(1) If rtlwifi is selected without selecting any of the dependent drivers,
    there are errors in the build.
(2) If the PCI drivers are built into the kernel and the USB drivers are modules,
    or vice versa, there are missing globals.

The first condition is fixed by never building rtlwifi unless at least one
of the device drivers is selected. The second failure is fixed by splitting
the PCI and USB codes out of rtlwifi, and creating their own mini drivers.
If the drivers that use them are modules, they will also be modules.

Although a number of files are touched by this patch, only Makefile and Kconfig
have undergone significant changes. The only modifications to the other files
were to export entry points needed by the new rtl_pci and rtl_usb units, or to
rename two variables that had names that were likely to cause namespace collisions.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>  [Condition 1]
Reported-by: Ben Hutchings <bhutchings@solarflare.com> [Condition 2]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/Kconfig  | 72 +++++++++++++++++++++++------------
 drivers/net/wireless/rtlwifi/Makefile | 10 ++---
 drivers/net/wireless/rtlwifi/base.c   | 19 +++++++--
 drivers/net/wireless/rtlwifi/base.h   |  2 +-
 drivers/net/wireless/rtlwifi/core.c   |  1 +
 drivers/net/wireless/rtlwifi/debug.c  |  1 +
 drivers/net/wireless/rtlwifi/efuse.c  |  1 +
 drivers/net/wireless/rtlwifi/pci.c    |  9 ++++-
 drivers/net/wireless/rtlwifi/ps.c     |  4 ++
 drivers/net/wireless/rtlwifi/usb.c    |  7 ++++
 10 files changed, 91 insertions(+), 35 deletions(-)

--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -1,29 +1,22 @@
-config RTLWIFI
-	tristate "Realtek wireless card support"
+menuconfig RTL_CARDS
+	tristate "Realtek rtlwifi family of devices"
 	depends on m
-	depends on MAC80211
-	select BACKPORT_FW_LOADER
-	---help---
-	  This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE
-	  drivers.  This module does nothing by itself - the various front-end
-	  drivers need to be enabled to support any desired devices.
-
-	  If you choose to build as a module, it'll be called rtlwifi.
-
-config RTLWIFI_DEBUG
-	bool "Debugging output for rtlwifi driver family"
-	depends on RTLWIFI
+	depends on MAC80211 && (PCI || USB)
 	default y
 	---help---
-	To use the module option that sets the dynamic-debugging level for,
-	the front-end driver, this parameter must be "Y". For memory-limited
-	systems, choose "N". If in doubt, choose "Y".
+	  This option will enable support for the Realtek mac80211-based
+	  wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
+	  rtl8723eu, and rtl8188eu share some common code.
+
+if RTL_CARDS
 
 config RTL8192CE
 	tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && PCI
+	depends on PCI
 	select RTL8192C_COMMON
+	select RTLWIFI
+	select RTLWIFI_PCI
 	---help---
 	This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
 	wireless network adapters.
@@ -33,7 +26,9 @@ config RTL8192CE
 config RTL8192SE
 	tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && PCI
+	depends on PCI
+	select RTLWIFI
+	select RTLWIFI_PCI
 	---help---
 	This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
 	wireless network adapters.
@@ -43,7 +38,9 @@ config RTL8192SE
 config RTL8192DE
 	tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && PCI
+	depends on PCI
+	select RTLWIFI
+	select RTLWIFI_PCI
 	---help---
 	This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
 	wireless network adapters.
@@ -53,7 +50,9 @@ config RTL8192DE
 config RTL8723AE
 	tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && PCI
+	depends on PCI
+	select RTLWIFI
+	select RTLWIFI_PCI
 	---help---
 	This is the driver for Realtek RTL8723AE 802.11n PCIe
 	wireless network adapters.
@@ -63,7 +62,9 @@ config RTL8723AE
 config RTL8188EE
 	tristate "Realtek RTL8188EE Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && PCI
+	depends on PCI
+	select RTLWIFI
+	select RTLWIFI_PCI
 	---help---
 	This is the driver for Realtek RTL8188EE 802.11n PCIe
 	wireless network adapters.
@@ -73,7 +74,9 @@ config RTL8188EE
 config RTL8192CU
 	tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
 	depends on m
-	depends on RTLWIFI && USB
+	depends on USB
+	select RTLWIFI
+	select RTLWIFI_USB
 	select RTL8192C_COMMON
 	---help---
 	This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
@@ -81,8 +84,32 @@ config RTL8192CU
 
 	If you choose to build it as a module, it will be called rtl8192cu
 
+config RTLWIFI
+	tristate "Realtek common driver part"
+	depends on m
+	select BACKPORT_FW_LOADER
+
+config RTLWIFI_PCI
+	depends on m
+	tristate
+
+config RTLWIFI_USB
+	depends on m
+	tristate
+
+config RTLWIFI_DEBUG
+	bool "Debugging output for rtlwifi driver family"
+	depends on RTLWIFI
+	default y
+	---help---
+	To use the module option that sets the dynamic-debugging level for,
+	the front-end driver, this parameter must be "Y". For memory-limited
+	systems, choose "N". If in doubt, choose "Y".
+
 config RTL8192C_COMMON
 	tristate
 	depends on m
 	depends on RTL8192CE || RTL8192CU
 	default m
+
+endif
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -12,13 +12,11 @@ rtlwifi-objs	:=		\
 
 rtl8192c_common-objs +=		\
 
-ifneq ($(CONFIG_PCI),)
-rtlwifi-objs	+= pci.o
-endif
+obj-$(CPTCFG_RTLWIFI_PCI)	+= rtl_pci.o
+rtl_pci-objs	:=		pci.o
 
-ifneq ($(CONFIG_USB),)
-rtlwifi-objs	+= usb.o
-endif
+obj-$(CPTCFG_RTLWIFI_USB)	+= rtl_usb.o
+rtl_usb-objs	:=		usb.o
 
 obj-$(CPTCFG_RTL8192C_COMMON)	+= rtl8192c/
 obj-$(CPTCFG_RTL8192CE)		+= rtl8192ce/
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -173,6 +173,7 @@ u8 rtl_tid_to_ac(u8 tid)
 {
 	return tid_to_ac[tid];
 }
+EXPORT_SYMBOL_GPL(rtl_tid_to_ac);
 
 static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
 				  struct ieee80211_sta_ht_cap *ht_cap)
@@ -407,6 +408,7 @@ void rtl_deinit_deferred_work(struct iee
 	cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
 	cancel_delayed_work(&rtlpriv->works.fwevt_wq);
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work);
 
 void rtl_init_rfkill(struct ieee80211_hw *hw)
 {
@@ -440,6 +442,7 @@ void rtl_deinit_rfkill(struct ieee80211_
 {
 	wiphy_rfkill_stop_polling(hw->wiphy);
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_rfkill);
 
 int rtl_init_core(struct ieee80211_hw *hw)
 {
@@ -490,10 +493,12 @@ int rtl_init_core(struct ieee80211_hw *h
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rtl_init_core);
 
 void rtl_deinit_core(struct ieee80211_hw *hw)
 {
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_core);
 
 void rtl_init_rx_config(struct ieee80211_hw *hw)
 {
@@ -502,6 +507,7 @@ void rtl_init_rx_config(struct ieee80211
 
 	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
 }
+EXPORT_SYMBOL_GPL(rtl_init_rx_config);
 
 /*********************************************************
  *
@@ -880,6 +886,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_h
 
 	return true;
 }
+EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc);
 
 void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 		      struct ieee80211_tx_info *info,
@@ -1053,6 +1060,7 @@ bool rtl_action_proc(struct ieee80211_hw
 
 	return true;
 }
+EXPORT_SYMBOL_GPL(rtl_action_proc);
 
 /*should call before software enc*/
 u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
@@ -1126,6 +1134,7 @@ u8 rtl_is_special_data(struct ieee80211_
 
 	return false;
 }
+EXPORT_SYMBOL_GPL(rtl_is_special_data);
 
 /*********************************************************
  *
@@ -1301,6 +1310,7 @@ void rtl_beacon_statistic(struct ieee802
 
 	rtlpriv->link_info.bcn_rx_inperiod++;
 }
+EXPORT_SYMBOL_GPL(rtl_beacon_statistic);
 
 void rtl_watchdog_wq_callback(void *data)
 {
@@ -1794,6 +1804,7 @@ void rtl_recognize_peer(struct ieee80211
 
 	mac->vendor = vendor;
 }
+EXPORT_SYMBOL_GPL(rtl_recognize_peer);
 
 /*********************************************************
  *
@@ -1850,6 +1861,7 @@ struct attribute_group rtl_attribute_gro
 	.name = "rtlsysfs",
 	.attrs = rtl_sysfs_entries,
 };
+EXPORT_SYMBOL_GPL(rtl_attribute_group);
 
 MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
 MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
@@ -1857,7 +1869,8 @@ MODULE_AUTHOR("Larry Finger	<Larry.FInge
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
 
-struct rtl_global_var global_var = {};
+struct rtl_global_var rtl_global_var = {};
+EXPORT_SYMBOL_GPL(rtl_global_var);
 
 static int __init rtl_core_module_init(void)
 {
@@ -1865,8 +1878,8 @@ static int __init rtl_core_module_init(v
 		pr_err("Unable to register rtl_rc, use default RC !!\n");
 
 	/* init some global vars */
-	INIT_LIST_HEAD(&global_var.glb_priv_list);
-	spin_lock_init(&global_var.glb_list_lock);
+	INIT_LIST_HEAD(&rtl_global_var.glb_priv_list);
+	spin_lock_init(&rtl_global_var.glb_list_lock);
 
 	return 0;
 }
--- a/drivers/net/wireless/rtlwifi/base.h
+++ b/drivers/net/wireless/rtlwifi/base.h
@@ -147,7 +147,7 @@ void rtl_recognize_peer(struct ieee80211
 u8 rtl_tid_to_ac(u8 tid);
 extern struct attribute_group rtl_attribute_group;
 void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
-extern struct rtl_global_var global_var;
+extern struct rtl_global_var rtl_global_var;
 int rtlwifi_rate_mapping(struct ieee80211_hw *hw,
 			 bool isht, u8 desc_rate, bool first_ampdu);
 bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -1330,3 +1330,4 @@ const struct ieee80211_ops rtl_ops = {
 	.rfkill_poll = rtl_op_rfkill_poll,
 	.flush = rtl_op_flush,
 };
+EXPORT_SYMBOL_GPL(rtl_ops);
--- a/drivers/net/wireless/rtlwifi/debug.c
+++ b/drivers/net/wireless/rtlwifi/debug.c
@@ -51,3 +51,4 @@ void rtl_dbgp_flag_init(struct ieee80211
 
 	/*Init Debug flag enable condition */
 }
+EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -229,6 +229,7 @@ void read_efuse_byte(struct ieee80211_hw
 
 	*pbuf = (u8) (value32 & 0xff);
 }
+EXPORT_SYMBOL_GPL(read_efuse_byte);
 
 void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 {
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -35,6 +35,13 @@
 #include "efuse.h"
 #include <linux/export.h>
 #include <linux/kmemleak.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCI basic driver for rtlwifi");
 
 static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
 	PCI_VENDOR_ID_INTEL,
@@ -1899,7 +1906,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
 	rtlpriv->rtlhal.interface = INTF_PCI;
 	rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
 	rtlpriv->intf_ops = &rtl_pci_ops;
-	rtlpriv->glb_var = &global_var;
+	rtlpriv->glb_var = &rtl_global_var;
 
 	/*
 	 *init dbgp flags before all
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw
 
 	spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
 }
+EXPORT_SYMBOL_GPL(rtl_ips_nic_on);
 
 /*for FW LPS*/
 
@@ -518,6 +519,7 @@ void rtl_swlps_beacon(struct ieee80211_h
 			 "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
 	}
 }
+EXPORT_SYMBOL_GPL(rtl_swlps_beacon);
 
 void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
 {
@@ -922,3 +925,4 @@ void rtl_p2p_info(struct ieee80211_hw *h
 	else
 		rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
 }
+EXPORT_SYMBOL_GPL(rtl_p2p_info);
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -32,6 +32,13 @@
 #include "ps.h"
 #include "rtl8192c/fw_common.h"
 #include <linux/export.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB basic driver for rtlwifi");
 
 #define	REALTEK_USB_VENQT_READ			0xC0
 #define	REALTEK_USB_VENQT_WRITE			0x40