2009-02-24 18:16:40 +00:00
|
|
|
#!/bin/sh
|
|
|
|
#
|
2011-12-05 12:56:20 +00:00
|
|
|
# Copyright (C) 2009-2011 OpenWrt.org
|
2009-02-24 18:16:40 +00:00
|
|
|
#
|
|
|
|
|
2011-12-05 12:56:20 +00:00
|
|
|
AR71XX_BOARD_NAME=
|
|
|
|
AR71XX_MODEL=
|
|
|
|
|
2011-12-07 06:55:39 +00:00
|
|
|
ar71xx_get_mtd_offset_size_format() {
|
|
|
|
local mtd="$1"
|
|
|
|
local offset="$2"
|
|
|
|
local size="$3"
|
|
|
|
local format="$4"
|
|
|
|
local dev
|
2011-12-05 13:03:54 +00:00
|
|
|
|
2011-12-07 06:55:39 +00:00
|
|
|
dev=$(find_mtd_part $mtd)
|
|
|
|
[ -z "$dev" ] && return
|
2011-12-05 13:03:54 +00:00
|
|
|
|
2011-12-07 06:55:39 +00:00
|
|
|
dd if=$dev bs=1 skip=$offset count=$size 2>/dev/null | hexdump -v -e "1/1 \"$format\""
|
|
|
|
}
|
2011-12-05 13:03:54 +00:00
|
|
|
|
2011-12-07 06:55:39 +00:00
|
|
|
ar71xx_get_mtd_part_magic() {
|
|
|
|
local mtd="$1"
|
|
|
|
ar71xx_get_mtd_offset_size_format "$mtd" 0 4 %02x
|
2011-12-05 13:03:54 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
wndr3700_board_detect() {
|
|
|
|
local machine="$1"
|
|
|
|
local magic
|
|
|
|
local name
|
|
|
|
|
|
|
|
name="wndr3700"
|
|
|
|
|
|
|
|
magic="$(ar71xx_get_mtd_part_magic firmware)"
|
|
|
|
case $magic in
|
|
|
|
"33373030")
|
|
|
|
machine="NETGEAR WNDR3700"
|
|
|
|
;;
|
|
|
|
"33373031")
|
2015-11-20 23:34:11 +00:00
|
|
|
model="$(ar71xx_get_mtd_offset_size_format art 41 32 %c)"
|
|
|
|
# Use awk to remove everything unprintable
|
2016-01-03 11:09:45 +00:00
|
|
|
model_stripped="$(ar71xx_get_mtd_offset_size_format art 41 32 %c | LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}')"
|
2015-03-29 12:58:01 +00:00
|
|
|
case $model in
|
|
|
|
$'\xff'*)
|
|
|
|
if [ "${model:24:1}" = 'N' ]; then
|
|
|
|
machine="NETGEAR WNDRMAC"
|
|
|
|
else
|
|
|
|
machine="NETGEAR WNDR3700v2"
|
|
|
|
fi
|
|
|
|
;;
|
|
|
|
'29763654+16+64'*)
|
2015-11-20 23:34:11 +00:00
|
|
|
machine="NETGEAR ${model_stripped:14}"
|
2015-03-29 12:58:01 +00:00
|
|
|
;;
|
|
|
|
'29763654+16+128'*)
|
2015-11-20 23:34:11 +00:00
|
|
|
machine="NETGEAR ${model_stripped:15}"
|
2015-03-29 12:58:01 +00:00
|
|
|
;;
|
|
|
|
*)
|
|
|
|
# Unknown ID
|
2015-11-20 23:34:11 +00:00
|
|
|
machine="NETGEAR ${model_stripped}"
|
2015-03-29 12:58:01 +00:00
|
|
|
esac
|
2011-12-05 13:03:54 +00:00
|
|
|
esac
|
|
|
|
|
|
|
|
AR71XX_BOARD_NAME="$name"
|
|
|
|
AR71XX_MODEL="$machine"
|
|
|
|
}
|
|
|
|
|
2016-09-24 17:00:14 +00:00
|
|
|
ubnt_get_mtd_part_magic() {
|
|
|
|
ar71xx_get_mtd_offset_size_format EEPROM 4118 2 %02x
|
|
|
|
}
|
|
|
|
|
|
|
|
ubnt_xm_board_detect() {
|
|
|
|
local model
|
|
|
|
local magic
|
|
|
|
|
|
|
|
magic="$(ubnt_get_mtd_part_magic)"
|
|
|
|
case ${magic:0:3} in
|
2017-03-10 21:23:46 +00:00
|
|
|
"e00"|\
|
|
|
|
"e01"|\
|
|
|
|
"e80")
|
|
|
|
model="Ubiquiti NanoStation M"
|
|
|
|
;;
|
|
|
|
"e0a")
|
|
|
|
model="Ubiquiti NanoStation loco M"
|
|
|
|
;;
|
|
|
|
"e1b"|\
|
|
|
|
"e1d")
|
|
|
|
model="Ubiquiti Rocket M"
|
|
|
|
;;
|
|
|
|
"e20"|\
|
|
|
|
"e2d")
|
|
|
|
model="Ubiquiti Bullet M"
|
|
|
|
;;
|
|
|
|
"e30")
|
|
|
|
model="Ubiquiti PicoStation M"
|
|
|
|
;;
|
2016-09-24 17:00:14 +00:00
|
|
|
esac
|
|
|
|
|
|
|
|
[ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}"
|
|
|
|
}
|
|
|
|
|
2018-02-25 11:09:38 +00:00
|
|
|
ubnt_ac_lite_get_mtd_part_magic() {
|
|
|
|
ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x
|
|
|
|
}
|
|
|
|
|
|
|
|
ubnt_ac_lite_board_detect() {
|
|
|
|
local model
|
|
|
|
local magic
|
|
|
|
|
|
|
|
magic="$(ubnt_ac_lite_get_mtd_part_magic)"
|
|
|
|
case ${magic:0:4} in
|
|
|
|
"e517")
|
|
|
|
model="Ubiquiti UniFi-AC-LITE"
|
|
|
|
;;
|
|
|
|
"e557")
|
|
|
|
model="Ubiquiti UniFi-AC-MESH"
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
|
|
|
|
[ -z "$model" ] || AR71XX_MODEL="${model}"
|
|
|
|
}
|
|
|
|
|
2013-11-30 18:31:03 +00:00
|
|
|
cybertan_get_hw_magic() {
|
|
|
|
local part
|
|
|
|
|
|
|
|
part=$(find_mtd_part firmware)
|
|
|
|
[ -z "$part" ] && return 1
|
|
|
|
|
|
|
|
dd bs=8 count=1 skip=0 if=$part 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
|
|
|
|
}
|
|
|
|
|
2016-07-28 13:43:25 +00:00
|
|
|
dir505_board_detect() {
|
|
|
|
local dev=$(find_mtd_part 'mac')
|
|
|
|
[ -z "$dev" ] && return
|
|
|
|
|
|
|
|
# The revision is stored at the beginning of the "mac" partition
|
|
|
|
local rev="$(LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}' $dev)"
|
|
|
|
AR71XX_MODEL="D-Link DIR-505 rev. $rev"
|
|
|
|
}
|
|
|
|
|
2011-12-05 18:11:51 +00:00
|
|
|
tplink_get_hwid() {
|
|
|
|
local part
|
|
|
|
|
|
|
|
part=$(find_mtd_part firmware)
|
|
|
|
[ -z "$part" ] && return 1
|
|
|
|
|
|
|
|
dd if=$part bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
|
|
}
|
|
|
|
|
2013-05-08 17:07:18 +00:00
|
|
|
tplink_get_mid() {
|
|
|
|
local part
|
|
|
|
|
|
|
|
part=$(find_mtd_part firmware)
|
|
|
|
[ -z "$part" ] && return 1
|
|
|
|
|
|
|
|
dd if=$part bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
|
|
|
}
|
|
|
|
|
2011-12-05 21:11:01 +00:00
|
|
|
tplink_board_detect() {
|
|
|
|
local model="$1"
|
|
|
|
local hwid
|
|
|
|
local hwver
|
|
|
|
|
|
|
|
hwid=$(tplink_get_hwid)
|
2013-05-08 17:07:18 +00:00
|
|
|
mid=$(tplink_get_mid)
|
2011-12-05 21:11:01 +00:00
|
|
|
hwver=${hwid:6:2}
|
2016-04-01 07:11:56 +00:00
|
|
|
hwver=" v${hwver#0}"
|
2011-12-05 21:11:01 +00:00
|
|
|
|
|
|
|
case "$hwid" in
|
2017-03-12 17:12:43 +00:00
|
|
|
"001001"*)
|
|
|
|
model="TP-Link TL-MR10U"
|
|
|
|
;;
|
|
|
|
"001101"*)
|
|
|
|
model="TP-Link TL-MR11U"
|
|
|
|
;;
|
|
|
|
"001201"*)
|
|
|
|
model="TP-Link TL-MR12U"
|
|
|
|
;;
|
|
|
|
"001301"*)
|
|
|
|
model="TP-Link TL-MR13U"
|
|
|
|
;;
|
|
|
|
"007260"*)
|
|
|
|
model="TellStick ZNet Lite"
|
|
|
|
;;
|
2014-06-26 11:49:47 +00:00
|
|
|
"015000"*)
|
|
|
|
model="EasyLink EL-M150"
|
|
|
|
;;
|
|
|
|
"015300"*)
|
|
|
|
model="EasyLink EL-MINI"
|
|
|
|
;;
|
2015-10-19 10:10:02 +00:00
|
|
|
"044401"*)
|
|
|
|
model="ANTMINER-S1"
|
2015-06-18 18:21:05 +00:00
|
|
|
;;
|
2015-10-19 10:10:02 +00:00
|
|
|
"044403"*)
|
|
|
|
model="ANTMINER-S3"
|
2015-07-07 13:46:54 +00:00
|
|
|
;;
|
2016-04-26 11:44:36 +00:00
|
|
|
"066601"*)
|
|
|
|
model="OMYlink OMY-G1"
|
|
|
|
;;
|
2016-03-16 09:26:58 +00:00
|
|
|
"066602"*)
|
|
|
|
model="OMYlink OMY-X1"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
"070100"*)
|
|
|
|
model="TP-Link TL-WA701N/ND"
|
2015-10-19 17:55:25 +00:00
|
|
|
;;
|
2015-11-21 21:24:11 +00:00
|
|
|
"070301"*)
|
2011-12-05 21:11:01 +00:00
|
|
|
model="TP-Link TL-WR703N"
|
|
|
|
;;
|
2013-07-28 10:23:33 +00:00
|
|
|
"071000"*)
|
|
|
|
model="TP-Link TL-WR710N"
|
2016-04-01 07:12:00 +00:00
|
|
|
|
2017-03-12 22:39:00 +00:00
|
|
|
[ "$hwid" = '07100002' -a "$mid" = '00000002' ] && hwver=' v2.1'
|
2013-07-28 10:23:33 +00:00
|
|
|
;;
|
2013-04-26 17:00:49 +00:00
|
|
|
"072001"*)
|
|
|
|
model="TP-Link TL-WR720N"
|
|
|
|
;;
|
2014-06-02 14:45:25 +00:00
|
|
|
"073000"*)
|
|
|
|
model="TP-Link TL-WA730RE"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"074000"*)
|
|
|
|
model="TP-Link TL-WR740N/ND"
|
|
|
|
;;
|
|
|
|
"074100"*)
|
|
|
|
model="TP-Link TL-WR741N/ND"
|
|
|
|
;;
|
|
|
|
"074300"*)
|
|
|
|
model="TP-Link TL-WR743N/ND"
|
|
|
|
;;
|
2013-11-11 08:04:47 +00:00
|
|
|
"075000"*)
|
|
|
|
model="TP-Link TL-WA750RE"
|
|
|
|
;;
|
2013-01-29 09:40:29 +00:00
|
|
|
"080100"*)
|
|
|
|
model="TP-Link TL-WA801N/ND"
|
|
|
|
;;
|
2016-10-21 09:47:15 +00:00
|
|
|
"080200"*)
|
|
|
|
model="TP-Link TL-WR802N"
|
2017-02-13 17:29:34 +00:00
|
|
|
|
2017-03-12 22:39:00 +00:00
|
|
|
[ "$hwid" = '08020002' -a "$mid" = '00000002' ] && hwver=' v2'
|
2016-10-21 09:47:15 +00:00
|
|
|
;;
|
2018-02-03 13:12:05 +00:00
|
|
|
"081000"*)
|
|
|
|
model="TP-Link TL-WR810N"
|
|
|
|
;;
|
2013-02-25 20:37:33 +00:00
|
|
|
"083000"*)
|
|
|
|
model="TP-Link TL-WA830RE"
|
2015-06-05 14:12:34 +00:00
|
|
|
|
2017-03-12 22:39:00 +00:00
|
|
|
[ "$hwver" = ' v10' ] && hwver=' v1'
|
2013-02-25 20:37:33 +00:00
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"084100"*)
|
|
|
|
model="TP-Link TL-WR841N/ND"
|
2016-04-01 07:12:00 +00:00
|
|
|
|
2017-03-12 22:39:00 +00:00
|
|
|
[ "$hwid" = '08410002' -a "$mid" = '00000002' ] && hwver=' v1.5'
|
2011-12-05 21:11:01 +00:00
|
|
|
;;
|
2012-02-13 17:11:57 +00:00
|
|
|
"084200"*)
|
|
|
|
model="TP-Link TL-WR842N/ND"
|
|
|
|
;;
|
2015-01-23 12:32:46 +00:00
|
|
|
"084300"*)
|
|
|
|
model="TP-Link TL-WR843N/ND"
|
|
|
|
;;
|
2013-11-11 08:04:47 +00:00
|
|
|
"085000"*)
|
|
|
|
model="TP-Link TL-WA850RE"
|
|
|
|
;;
|
2017-06-09 15:11:39 +00:00
|
|
|
"085500"*)
|
|
|
|
model="TP-Link TL-WA855RE"
|
|
|
|
;;
|
2014-07-13 10:03:41 +00:00
|
|
|
"086000"*)
|
|
|
|
model="TP-Link TL-WA860RE"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"090100"*)
|
|
|
|
model="TP-Link TL-WA901N/ND"
|
|
|
|
;;
|
2016-12-12 14:59:03 +00:00
|
|
|
"094000"*)
|
|
|
|
model="TP-Link TL-WR940N"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"094100"*)
|
2017-03-12 22:39:00 +00:00
|
|
|
model="TP-Link TL-WR941N/ND"
|
|
|
|
|
|
|
|
[ "$hwid" = "09410002" -a "$mid" = "00420001" ] && {
|
2013-05-08 17:07:18 +00:00
|
|
|
model="Rosewill RNX-N360RT"
|
|
|
|
hwver=""
|
2017-03-12 22:39:00 +00:00
|
|
|
}
|
2011-12-05 21:11:01 +00:00
|
|
|
;;
|
2012-05-05 17:02:35 +00:00
|
|
|
"104100"*)
|
|
|
|
model="TP-Link TL-WR1041N/ND"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"104300"*)
|
|
|
|
model="TP-Link TL-WR1043N/ND"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
"120000"*)
|
|
|
|
model="MERCURY MAC1200R"
|
|
|
|
;;
|
2012-01-07 19:36:35 +00:00
|
|
|
"254300"*)
|
|
|
|
model="TP-Link TL-WR2543N/ND"
|
|
|
|
;;
|
2012-01-04 17:30:47 +00:00
|
|
|
"302000"*)
|
|
|
|
model="TP-Link TL-MR3020"
|
|
|
|
;;
|
2012-05-23 21:05:24 +00:00
|
|
|
"304000"*)
|
|
|
|
model="TP-Link TL-MR3040"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
"322000"*)
|
|
|
|
model="TP-Link TL-MR3220"
|
|
|
|
;;
|
2015-09-14 20:12:16 +00:00
|
|
|
"332000"*)
|
|
|
|
model="TP-Link TL-WDR3320"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
"342000"*)
|
|
|
|
model="TP-Link TL-MR3420"
|
|
|
|
;;
|
2013-02-01 15:50:32 +00:00
|
|
|
"350000"*)
|
|
|
|
model="TP-Link TL-WDR3500"
|
|
|
|
;;
|
2012-08-22 09:43:18 +00:00
|
|
|
"360000"*)
|
|
|
|
model="TP-Link TL-WDR3600"
|
|
|
|
;;
|
2012-06-19 11:51:18 +00:00
|
|
|
"430000"*)
|
|
|
|
model="TP-Link TL-WDR4300"
|
|
|
|
;;
|
2014-03-27 06:36:59 +00:00
|
|
|
"430080"*)
|
|
|
|
iw reg set IL
|
|
|
|
model="TP-Link TL-WDR4300 (IL)"
|
|
|
|
;;
|
2012-07-12 13:38:40 +00:00
|
|
|
"431000"*)
|
|
|
|
model="TP-Link TL-WDR4310"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
"44440101"*)
|
|
|
|
model="ANTROUTER-R1"
|
|
|
|
;;
|
|
|
|
"453000"*)
|
|
|
|
model="Mercury MW4530R"
|
|
|
|
;;
|
2014-02-19 12:15:34 +00:00
|
|
|
"49000002")
|
|
|
|
model="TP-Link TL-WDR4900"
|
|
|
|
;;
|
2017-05-25 19:51:37 +00:00
|
|
|
"640000"*)
|
|
|
|
model="TP-Link TL-MR6400"
|
|
|
|
;;
|
2015-08-17 06:24:04 +00:00
|
|
|
"65000002")
|
|
|
|
model="TP-Link TL-WDR6500"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
"721000"*)
|
|
|
|
model="TP-Link TL-WA7210N"
|
|
|
|
;;
|
|
|
|
"750000"*|\
|
|
|
|
"c70000"*)
|
|
|
|
model="TP-Link Archer C7"
|
|
|
|
;;
|
|
|
|
"751000"*)
|
|
|
|
model="TP-Link TL-WA7510N"
|
2013-07-28 10:23:29 +00:00
|
|
|
;;
|
2014-08-11 11:44:51 +00:00
|
|
|
"934100"*)
|
|
|
|
model="NC-LINK SMART-300"
|
|
|
|
;;
|
2014-10-06 04:53:34 +00:00
|
|
|
"c50000"*)
|
|
|
|
model="TP-Link Archer C5"
|
|
|
|
;;
|
2011-12-05 21:11:01 +00:00
|
|
|
*)
|
|
|
|
hwver=""
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
|
2016-04-01 07:11:56 +00:00
|
|
|
AR71XX_MODEL="$model$hwver"
|
2011-12-05 21:11:01 +00:00
|
|
|
}
|
|
|
|
|
2014-11-26 08:59:32 +00:00
|
|
|
tplink_pharos_get_model_string() {
|
|
|
|
local part
|
|
|
|
part=$(find_mtd_part 'product-info')
|
|
|
|
[ -z "$part" ] && return 1
|
|
|
|
|
|
|
|
# The returned string will end with \r\n, but we don't remove it here
|
|
|
|
# to simplify matching against it in the sysupgrade image check
|
|
|
|
dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
|
|
|
|
}
|
|
|
|
|
|
|
|
tplink_pharos_board_detect() {
|
|
|
|
local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
|
|
|
|
local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
|
|
|
|
|
2016-12-11 16:54:49 +00:00
|
|
|
local model="${1%%\(*}"
|
2014-11-26 08:59:32 +00:00
|
|
|
|
2016-12-11 16:54:49 +00:00
|
|
|
AR71XX_MODEL="TP-Link $model v$2"
|
2014-11-26 08:59:32 +00:00
|
|
|
}
|
|
|
|
|
2011-12-05 12:56:20 +00:00
|
|
|
ar71xx_board_detect() {
|
2009-02-24 18:16:40 +00:00
|
|
|
local machine
|
|
|
|
local name
|
|
|
|
|
|
|
|
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
|
|
|
|
|
|
|
|
case "$machine" in
|
2016-09-23 07:36:43 +00:00
|
|
|
*"A40")
|
|
|
|
name="a40"
|
|
|
|
;;
|
2016-08-09 14:06:45 +00:00
|
|
|
*"A60")
|
|
|
|
name="a60"
|
|
|
|
;;
|
2014-12-17 08:27:38 +00:00
|
|
|
*"AC1750DB")
|
|
|
|
name="f9k1115v2"
|
|
|
|
;;
|
2014-07-20 17:30:17 +00:00
|
|
|
*"AirGateway")
|
|
|
|
name="airgateway"
|
|
|
|
;;
|
2015-09-16 08:31:40 +00:00
|
|
|
*"AirGateway Pro")
|
|
|
|
name="airgatewaypro"
|
|
|
|
;;
|
2011-12-01 22:49:02 +00:00
|
|
|
*"AirRouter")
|
|
|
|
name="airrouter"
|
|
|
|
;;
|
2016-03-23 22:31:38 +00:00
|
|
|
*"ALFA Network AP120C")
|
|
|
|
name="alfa-ap120c"
|
|
|
|
;;
|
2016-03-24 21:09:34 +00:00
|
|
|
*"ALFA Network AP96")
|
|
|
|
name="alfa-ap96"
|
|
|
|
;;
|
2012-01-01 19:30:25 +00:00
|
|
|
*"ALFA Network N2/N5")
|
|
|
|
name="alfa-nx"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ALL0258N")
|
2011-10-24 21:49:21 +00:00
|
|
|
name="all0258n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ALL0305")
|
2012-08-22 12:33:22 +00:00
|
|
|
name="all0305"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ALL0315N")
|
2012-08-27 14:55:32 +00:00
|
|
|
name="all0315n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"Antminer-S1")
|
2015-10-19 10:10:02 +00:00
|
|
|
name="antminer-s1"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"Antminer-S3")
|
2015-10-19 10:10:02 +00:00
|
|
|
name="antminer-s3"
|
|
|
|
;;
|
2016-03-04 08:33:38 +00:00
|
|
|
*"AP121 reference board")
|
2011-05-31 22:53:44 +00:00
|
|
|
name="ap121"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"AP121-MINI")
|
2011-05-31 22:53:44 +00:00
|
|
|
name="ap121-mini"
|
|
|
|
;;
|
2017-03-31 11:37:31 +00:00
|
|
|
*"AP121F")
|
|
|
|
name="ap121f"
|
|
|
|
;;
|
2013-01-29 19:12:32 +00:00
|
|
|
*"AP132 reference board")
|
|
|
|
name="ap132"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"AP135-020 reference board")
|
|
|
|
name="ap135-020"
|
|
|
|
;;
|
2012-12-26 09:50:31 +00:00
|
|
|
*"AP136-010 reference board")
|
|
|
|
name="ap136-010"
|
2012-07-05 08:26:50 +00:00
|
|
|
;;
|
2012-12-26 09:50:36 +00:00
|
|
|
*"AP136-020 reference board")
|
|
|
|
name="ap136-020"
|
|
|
|
;;
|
2015-07-07 08:06:05 +00:00
|
|
|
*"AP143 reference board")
|
|
|
|
name="ap143"
|
|
|
|
;;
|
2015-07-24 09:09:42 +00:00
|
|
|
*"AP147-010 reference board")
|
|
|
|
name="ap147-010"
|
|
|
|
;;
|
2015-09-16 08:33:14 +00:00
|
|
|
*"AP152 reference board")
|
|
|
|
name="ap152"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"AP531B0")
|
2017-03-02 17:23:50 +00:00
|
|
|
name="ap531b0"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"AP90Q")
|
2016-10-06 00:19:17 +00:00
|
|
|
name="ap90q"
|
|
|
|
;;
|
2017-12-18 13:51:28 +00:00
|
|
|
*"AP91-5G")
|
|
|
|
name="ap91-5g"
|
|
|
|
;;
|
2017-04-22 16:21:47 +00:00
|
|
|
*"Archer C25 v1")
|
|
|
|
name="archer-c25-v1"
|
|
|
|
;;
|
2014-07-23 12:47:25 +00:00
|
|
|
*"Archer C5")
|
|
|
|
name="archer-c5"
|
|
|
|
;;
|
2017-07-25 11:32:47 +00:00
|
|
|
*"Archer C7 v4")
|
|
|
|
name="archer-c7-v4"
|
|
|
|
;;
|
2017-06-16 13:26:30 +00:00
|
|
|
*"Archer C58 v1")
|
|
|
|
name="archer-c58-v1"
|
|
|
|
;;
|
2016-12-27 21:41:41 +00:00
|
|
|
*"Archer C59 v1")
|
|
|
|
name="archer-c59-v1"
|
|
|
|
;;
|
|
|
|
*"Archer C60 v1")
|
|
|
|
name="archer-c60-v1"
|
|
|
|
;;
|
2018-01-15 05:44:14 +00:00
|
|
|
*"Archer C60 v2")
|
|
|
|
name="archer-c60-v2"
|
|
|
|
;;
|
2013-05-30 16:23:09 +00:00
|
|
|
*"Archer C7")
|
|
|
|
name="archer-c7"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Arduino Yun")
|
|
|
|
name="arduino-yun"
|
|
|
|
;;
|
2012-01-04 21:13:54 +00:00
|
|
|
*"Atheros AP96")
|
2010-09-27 08:59:53 +00:00
|
|
|
name="ap96"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"AW-NR580")
|
2009-02-27 20:49:51 +00:00
|
|
|
name="aw-nr580"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"BHR-4GRV2")
|
2016-11-08 13:45:00 +00:00
|
|
|
name="bhr-4grv2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Black Swift board"*)
|
|
|
|
name="bsb"
|
|
|
|
;;
|
|
|
|
*"Bullet M")
|
|
|
|
name="bullet-m"
|
|
|
|
ubnt_xm_board_detect
|
|
|
|
;;
|
|
|
|
*"BXU2000n-2 rev. A1")
|
|
|
|
name="bxu2000n-2-a1"
|
2015-12-19 11:27:59 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"C-55")
|
2015-12-23 14:43:35 +00:00
|
|
|
name="c-55"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"C-60")
|
2016-10-05 12:53:11 +00:00
|
|
|
name="c-60"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"CAP324")
|
|
|
|
name="cap324"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CAP4200AG")
|
2012-10-27 08:55:39 +00:00
|
|
|
name="cap4200ag"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Carambola2"*)
|
|
|
|
name="carambola2"
|
|
|
|
;;
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
*"CF-E316N v2")
|
2015-09-11 16:31:35 +00:00
|
|
|
name="cf-e316n-v2"
|
|
|
|
;;
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
*"CF-E320N v2")
|
|
|
|
name="cf-e320n-v2"
|
|
|
|
;;
|
2018-02-05 20:31:07 +00:00
|
|
|
*"CF-E355AC v1")
|
|
|
|
name="cf-e355ac-v1"
|
2017-06-29 10:03:03 +00:00
|
|
|
;;
|
2018-01-22 06:57:57 +00:00
|
|
|
*"CF-E355AC v2")
|
|
|
|
name="cf-e355ac-v2"
|
|
|
|
;;
|
2018-02-07 03:47:52 +00:00
|
|
|
*"CF-E375AC")
|
|
|
|
name="cf-e375ac"
|
|
|
|
;;
|
ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.
There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size
Version number is available only inside vendor GUI,
hardware and markings are the same.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-14 16:38:23 +00:00
|
|
|
*"CF-E380AC v1")
|
|
|
|
name="cf-e380ac-v1"
|
|
|
|
;;
|
|
|
|
*"CF-E380AC v2")
|
|
|
|
name="cf-e380ac-v2"
|
|
|
|
;;
|
2018-01-23 20:37:16 +00:00
|
|
|
*"CF-E385AC")
|
|
|
|
name="cf-e385ac"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CF-E520N")
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
name="cf-e520n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CF-E530N")
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
name="cf-e530n"
|
|
|
|
;;
|
2016-05-23 01:17:00 +00:00
|
|
|
*"CPE210/220")
|
|
|
|
name="cpe210"
|
|
|
|
tplink_pharos_board_detect
|
|
|
|
;;
|
ar71xx: add support for P&W R602N and CPE505N
P&W (full name: Shenzhen Progress&Win Technologies) R602N (could be also
labeled as R602F, R602, etc.) is a simple N300 router with 5-port
10/100 Mbps switch, non-detachable antennas and USB.
CPE505 is an outdoor CPE with PoE support and detachable antennas.
Both devices are based on Qualcomm/Atheros QCA9531 v2.
Common specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- UART (J2) header on PCB
R602N specification:
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 2T2R 2.4 GHz with external LNA and PA (SE2576L), up to 28 dBm
- 2x external, non-detachable antennas
- 7x LED, 1x button
CPE505N specification:
- 2x 10/100 Mbps Ethernet (both ports support passive PoE 12-24 V)
- 2T2R 2.4 GHz with external LNA and PA (SKY65174-21), up to 30 dBm
- 2x external, detachable antennas (RP-SMA connectors)
- 1x RGB LED, 2x LEDs (in RJ45 sockets), 1x button
Flash instructions:
It seems that there are many different versions of the firmware which
these devices are shipped with. The generic/standard one is based on
some modified OpenWrt and LEDE firmware can be flashed directly from
vendor's webgui or with sysupgrade (root password is "admin123").
Before flashing, make sure (use "fw_printenv") that the kernel load
address in your device is set to "0x9f050000" (bootcmd variable is
"bootm 0x9f050000"). If your device uses different load address, you
should first change it, under vendor's firmware, with command:
fw_setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
Where OLD_ADDRESS is previous kernel load address (in CPE505 version
I got access to, it was "0x9fe80000"). This will allow you to use
both the vendor's and LEDE firmware.
If version of your device contains empty U-Boot environment (you will
get information about this after issuing "fw_printenv"), you should
use U-Boot, serial line access and TFTP to perform firmware upgrade:
1. tftp 0x80060000 lede-ar71xx-generic-...-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
5. saveenv && reset
These devices contain also web recovery mode inside U-Boot. It can be
started with pressing the reset button for around 3 seconds just after
the device powerup. Web recovery panel is available on "192.168.10.9"
and to be able to use it, IP on your PC must be set to "192.168.10.10".
Make sure to change kernel load address before using recovery mode or
the U-Boot will not be able to load LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-15 23:54:08 +00:00
|
|
|
*"CPE505N")
|
|
|
|
name="cpe505n"
|
|
|
|
;;
|
2016-05-23 01:17:00 +00:00
|
|
|
*"CPE510/520")
|
2014-11-26 08:59:32 +00:00
|
|
|
name="cpe510"
|
|
|
|
tplink_pharos_board_detect
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CPE830")
|
2016-10-08 01:36:35 +00:00
|
|
|
name="cpe830"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CPE870")
|
2016-10-07 23:17:04 +00:00
|
|
|
name="cpe870"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CR3000")
|
2015-12-19 11:28:12 +00:00
|
|
|
name="cr3000"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"CR5000")
|
2015-12-19 11:28:18 +00:00
|
|
|
name="cr5000"
|
|
|
|
;;
|
ar71xx: Add support for D-Link DAP-1330 a1
D-Link DAP-1330 rev. A1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR1)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 6x LED (2 are bi-color), 2x button
- 4 pin on pcb (looking from eth port and from left to right tx,rx,gnd,vcc)
Flash instruction: use "factory" image directly in vendor GUI.
This device has a recovery system that assign the ip addr of env
variable "serverip" via dhcp to a pc, and the "ipaddr" value to itself.
The recovery it's triggered by a not bootable firmware,
or pressing the reset button during the bootloader startup (first 30 seconds).
The recovery uses a http page to restore the firmware, and it's checking
the firmware image header, so use the "factory" image to
restore or the original firmware.
You can access vendor firmware over serial using:
- login: root
- password: linuxrocks
Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
2017-06-16 12:12:25 +00:00
|
|
|
*"DAP-1330 Rev. A1")
|
|
|
|
name="dap-1330-a1"
|
|
|
|
;;
|
2016-07-18 17:39:57 +00:00
|
|
|
*"DAP-2695 rev. A1")
|
|
|
|
name="dap-2695-a1"
|
|
|
|
;;
|
2012-02-10 11:46:31 +00:00
|
|
|
*"DB120 reference board")
|
2011-11-12 10:54:10 +00:00
|
|
|
name="db120"
|
|
|
|
;;
|
2014-11-27 14:27:34 +00:00
|
|
|
*"DGL-5500 rev. A1")
|
|
|
|
name="dgl-5500-a1"
|
|
|
|
;;
|
2014-11-19 09:20:47 +00:00
|
|
|
*"DHP-1565 rev. A1")
|
|
|
|
name="dhp-1565-a1"
|
|
|
|
;;
|
2013-08-05 10:41:48 +00:00
|
|
|
*"DIR-505 rev. A1")
|
|
|
|
name="dir-505-a1"
|
2016-07-28 13:43:25 +00:00
|
|
|
dir505_board_detect
|
2013-08-05 10:41:48 +00:00
|
|
|
;;
|
2010-01-11 08:02:10 +00:00
|
|
|
*"DIR-600 rev. A1")
|
|
|
|
name="dir-600-a1"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"DIR-615 rev. C1")
|
|
|
|
name="dir-615-c1"
|
|
|
|
;;
|
2014-06-02 14:43:35 +00:00
|
|
|
*"DIR-615 rev. E1")
|
|
|
|
name="dir-615-e1"
|
|
|
|
;;
|
2012-01-31 18:37:09 +00:00
|
|
|
*"DIR-615 rev. E4")
|
|
|
|
name="dir-615-e4"
|
|
|
|
;;
|
2015-07-07 13:48:39 +00:00
|
|
|
*"DIR-615 rev. I1")
|
|
|
|
name="dir-615-i1"
|
|
|
|
;;
|
2009-12-03 15:07:41 +00:00
|
|
|
*"DIR-825 rev. B1")
|
|
|
|
name="dir-825-b1"
|
2009-12-03 15:07:34 +00:00
|
|
|
;;
|
2013-01-29 22:50:54 +00:00
|
|
|
*"DIR-825 rev. C1")
|
|
|
|
name="dir-825-c1"
|
|
|
|
;;
|
2013-03-11 15:55:15 +00:00
|
|
|
*"DIR-835 rev. A1")
|
|
|
|
name="dir-835-a1"
|
|
|
|
;;
|
2016-10-11 18:32:26 +00:00
|
|
|
*"DIR-869 rev. A1")
|
|
|
|
name="dir-869-a1"
|
|
|
|
;;
|
2015-11-21 21:24:18 +00:00
|
|
|
*"dLAN Hotspot")
|
|
|
|
name="dlan-hotspot"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"dLAN pro 1200+ WiFi ac")
|
|
|
|
name="dlan-pro-1200-ac"
|
|
|
|
;;
|
2015-07-14 07:32:33 +00:00
|
|
|
*"dLAN pro 500 Wireless+")
|
|
|
|
name="dlan-pro-500-wp"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Domino Pi")
|
|
|
|
name="gl-domino"
|
2015-07-14 07:37:03 +00:00
|
|
|
;;
|
2017-10-23 11:30:20 +00:00
|
|
|
*"DR342")
|
|
|
|
name="dr342"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"DR344")
|
2015-12-11 15:04:47 +00:00
|
|
|
name="dr344"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"DR531")
|
2016-06-16 16:08:03 +00:00
|
|
|
name="dr531"
|
|
|
|
;;
|
2014-01-30 17:08:02 +00:00
|
|
|
*"Dragino v2")
|
|
|
|
name="dragino2"
|
|
|
|
;;
|
2016-10-18 08:18:50 +00:00
|
|
|
*"DW33D")
|
|
|
|
name="dw33d"
|
|
|
|
;;
|
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2
WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11)
- 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11)
- 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 1x USB 2.0
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (J5) and LEDs (J13) headers on PCB
WHQX E600G is based on Qualcomm QCA9531.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB
WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11)
- 2x 10/100 Mbps Ethernet
- 6x LED (1x RGB, 5 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-12 V)
- UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB
Important notice:
First version of these boards are using different mtd layout, with ART
data at the end. You should not use v2 images on v1 board because it
will result in lost of ART data!
Flash instruction (using U-Boot CLI and tftp server):
1. Configure PC with static IP 192.168.1.10 and tftp server.
2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
3. Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
4. Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
1. Configure PC with static IP 192.168.1.xxx(2-254)/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
3. Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[reworked: image generation code, mach-* files, commit description,
fixed minor code style issues, rebased on master]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 09:38:05 +00:00
|
|
|
*"E1700AC v2")
|
|
|
|
name="e1700ac-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"E2100L")
|
2016-11-27 06:52:53 +00:00
|
|
|
name="e2100l"
|
|
|
|
;;
|
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2
WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11)
- 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11)
- 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 1x USB 2.0
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (J5) and LEDs (J13) headers on PCB
WHQX E600G is based on Qualcomm QCA9531.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB
WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11)
- 2x 10/100 Mbps Ethernet
- 6x LED (1x RGB, 5 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-12 V)
- UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB
Important notice:
First version of these boards are using different mtd layout, with ART
data at the end. You should not use v2 images on v1 board because it
will result in lost of ART data!
Flash instruction (using U-Boot CLI and tftp server):
1. Configure PC with static IP 192.168.1.10 and tftp server.
2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
3. Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
4. Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
1. Configure PC with static IP 192.168.1.xxx(2-254)/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
3. Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[reworked: image generation code, mach-* files, commit description,
fixed minor code style issues, rebased on master]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 09:38:05 +00:00
|
|
|
*"E600G v2")
|
|
|
|
name="e600g-v2"
|
|
|
|
;;
|
|
|
|
*"E600GAC v2")
|
|
|
|
name="e600gac-v2"
|
|
|
|
;;
|
2016-10-06 21:46:38 +00:00
|
|
|
*"EAP120")
|
|
|
|
name="eap120"
|
|
|
|
tplink_pharos_board_detect
|
|
|
|
;;
|
2014-07-14 21:30:28 +00:00
|
|
|
*"EAP300 v2")
|
|
|
|
name="eap300v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"EAP7660D")
|
2010-06-18 16:22:05 +00:00
|
|
|
name="eap7660d"
|
|
|
|
;;
|
2017-02-03 05:01:36 +00:00
|
|
|
*"EBR-2310 rev. C1")
|
|
|
|
name="ebr-2310-c1"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"EL-M150")
|
2014-06-26 11:49:47 +00:00
|
|
|
name="el-m150"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"EL-MINI")
|
2014-06-26 11:49:47 +00:00
|
|
|
name="el-mini"
|
|
|
|
;;
|
2018-01-15 15:45:16 +00:00
|
|
|
*"EmbWir-Balin")
|
|
|
|
name="ew-balin"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"EmbWir-Dorin")
|
|
|
|
name="ew-dorin"
|
2016-07-24 09:17:34 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"EmbWir-Dorin-Router")
|
|
|
|
name="ew-dorin-router"
|
2016-07-15 10:00:04 +00:00
|
|
|
;;
|
2017-04-14 17:08:17 +00:00
|
|
|
*"ENS202EXT")
|
|
|
|
name="ens202ext"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"EPG5000")
|
2015-06-18 18:21:41 +00:00
|
|
|
name="epg5000"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"ESR1750")
|
2014-07-13 19:43:58 +00:00
|
|
|
name="esr1750"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"ESR900")
|
2014-07-14 10:25:51 +00:00
|
|
|
name="esr900"
|
|
|
|
;;
|
2016-05-26 11:20:53 +00:00
|
|
|
*"eTactica EG-200")
|
|
|
|
name="rme-eg200"
|
|
|
|
;;
|
2018-04-24 17:52:13 +00:00
|
|
|
*"FRITZ!Box 4020")
|
|
|
|
name="fritz4020"
|
|
|
|
;;
|
2016-12-30 10:53:21 +00:00
|
|
|
*"FRITZ!WLAN Repeater 300E")
|
|
|
|
name="fritz300e"
|
|
|
|
;;
|
2018-01-19 08:36:00 +00:00
|
|
|
*"GL-AR150")
|
2017-03-12 17:12:43 +00:00
|
|
|
name="gl-ar150"
|
2009-10-01 19:41:06 +00:00
|
|
|
;;
|
2018-01-19 08:36:00 +00:00
|
|
|
*"GL-AR300")
|
2017-03-12 17:12:43 +00:00
|
|
|
name="gl-ar300"
|
2014-09-15 10:19:14 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"GL-AR300M")
|
|
|
|
name="gl-ar300m"
|
2009-11-25 09:51:28 +00:00
|
|
|
;;
|
2017-10-17 21:30:01 +00:00
|
|
|
*"GL-AR750")
|
|
|
|
name="gl-ar750"
|
|
|
|
;;
|
2018-05-25 10:06:37 +00:00
|
|
|
*"GL-AR750S")
|
|
|
|
name="gl-ar750s"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"GL-CONNECT INET v1")
|
|
|
|
name="gl-inet"
|
2017-03-12 22:39:00 +00:00
|
|
|
|
|
|
|
local size="$(mtd_get_part_size 'firmware')"
|
|
|
|
|
|
|
|
[ "$size" = "8192000" ] && AR71XX_MODEL="GL-iNet 6408A v1"
|
|
|
|
[ "$size" = "16580608" ] && AR71XX_MODEL="GL-iNet 6416A v1"
|
2014-07-14 07:38:43 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"GL-MIFI")
|
|
|
|
name="gl-mifi"
|
2010-10-01 07:09:29 +00:00
|
|
|
;;
|
2017-08-19 16:26:46 +00:00
|
|
|
*"GL-USB150")
|
|
|
|
name="gl-usb150"
|
|
|
|
;;
|
2017-04-27 03:09:27 +00:00
|
|
|
*"HiveAP-121")
|
|
|
|
name="hiveap-121"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"HiWiFi HC6361")
|
|
|
|
name="hiwifi-hc6361"
|
2016-07-08 13:03:00 +00:00
|
|
|
;;
|
2011-12-14 20:54:10 +00:00
|
|
|
*"Hornet-UB")
|
2017-03-12 22:39:00 +00:00
|
|
|
local size="$(mtd_get_part_size 'firmware')"
|
2013-08-15 00:57:47 +00:00
|
|
|
|
2017-03-12 22:39:00 +00:00
|
|
|
[ "$size" = "7929856" ] && name="hornet-ub"
|
|
|
|
[ "$size" = "16318464" ] && name="hornet-ub-x2"
|
2011-12-14 20:54:10 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"JA76PF")
|
|
|
|
name="ja76pf"
|
|
|
|
;;
|
|
|
|
*"JA76PF2")
|
|
|
|
name="ja76pf2"
|
|
|
|
;;
|
|
|
|
*"JWAP003")
|
|
|
|
name="jwap003"
|
|
|
|
;;
|
|
|
|
*"JWAP230")
|
|
|
|
name="jwap230"
|
|
|
|
;;
|
2018-05-29 15:00:53 +00:00
|
|
|
*"Koala")
|
|
|
|
name="koala"
|
|
|
|
;;
|
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:
- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel
WiFi Pineapple NANO specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button
LAN Turtle specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)
Packet Squirrel specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch
Flash instructions for all 3 devices:
Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.
Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-13 02:26:33 +00:00
|
|
|
*"LAN Turtle")
|
|
|
|
name="lan-turtle"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Lima"*)
|
|
|
|
name="lima"
|
|
|
|
;;
|
2018-03-02 00:16:34 +00:00
|
|
|
*"Litebeam M5"*)
|
|
|
|
name="lbe-m5"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Loco M XW")
|
|
|
|
name="loco-m-xw"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"LS-SR71")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="ls-sr71"
|
|
|
|
;;
|
2015-02-09 12:16:51 +00:00
|
|
|
*"MAC1200R")
|
|
|
|
name="mc-mac1200r"
|
|
|
|
;;
|
2015-10-19 17:55:25 +00:00
|
|
|
*"MiniBox V1.0")
|
|
|
|
name="minibox-v1"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR12")
|
2015-05-23 15:27:22 +00:00
|
|
|
name="mr12"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR16")
|
2015-05-23 15:27:22 +00:00
|
|
|
name="mr16"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR1750")
|
2015-09-14 20:11:01 +00:00
|
|
|
name="mr1750"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR1750v2")
|
2016-05-20 15:53:14 +00:00
|
|
|
name="mr1750v2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"MR18")
|
|
|
|
name="mr18"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR600")
|
2012-11-18 09:32:35 +00:00
|
|
|
name="mr600"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"MR600v2")
|
|
|
|
name="mr600v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR900")
|
2014-11-14 16:54:15 +00:00
|
|
|
name="mr900"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MR900v2")
|
2014-11-14 16:55:04 +00:00
|
|
|
name="mr900v2"
|
|
|
|
;;
|
2013-09-19 22:36:41 +00:00
|
|
|
*"My Net N600")
|
|
|
|
name="mynet-n600"
|
|
|
|
;;
|
2013-12-16 07:16:43 +00:00
|
|
|
*"My Net N750")
|
|
|
|
name="mynet-n750"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"My Net Wi-Fi Range Extender")
|
2013-11-07 22:31:53 +00:00
|
|
|
name="mynet-rext"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MZK-W04NU")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="mzk-w04nu"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"MZK-W300NH")
|
2009-06-04 18:18:36 +00:00
|
|
|
name="mzk-w300nh"
|
|
|
|
;;
|
ar71xx: add support for ALFA Network N5Q
ALFA Network N5Q is a successor of previous model, the N5 (outdoor
CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
Atheros AR9344.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm
- 8x LED (7 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmare which is based
on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 10:35:45 +00:00
|
|
|
*"N5Q")
|
|
|
|
name="n5q"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Nanostation M")
|
|
|
|
name="nanostation-m"
|
|
|
|
ubnt_xm_board_detect
|
|
|
|
;;
|
|
|
|
*"Nanostation M XW")
|
|
|
|
name="nanostation-m-xw"
|
|
|
|
;;
|
2010-12-10 15:17:03 +00:00
|
|
|
*"NBG460N/550N/550NH")
|
|
|
|
name="nbg460n_550n_550nh"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"NBG6616")
|
2015-11-07 12:51:39 +00:00
|
|
|
name="nbg6616"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"NBG6716")
|
2014-04-13 08:29:07 +00:00
|
|
|
name="nbg6716"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"OM2P")
|
2011-10-27 07:54:51 +00:00
|
|
|
name="om2p"
|
|
|
|
;;
|
2012-10-17 08:26:01 +00:00
|
|
|
*"OM2P HS")
|
|
|
|
name="om2p-hs"
|
|
|
|
;;
|
2014-06-02 13:21:31 +00:00
|
|
|
*"OM2P HSv2")
|
|
|
|
name="om2p-hsv2"
|
|
|
|
;;
|
2016-05-20 15:53:08 +00:00
|
|
|
*"OM2P HSv3")
|
|
|
|
name="om2p-hsv3"
|
|
|
|
;;
|
2016-06-02 09:25:00 +00:00
|
|
|
*"OM2P HSv4")
|
|
|
|
name="om2p-hsv4"
|
|
|
|
;;
|
2012-07-05 08:26:53 +00:00
|
|
|
*"OM2P LC")
|
|
|
|
name="om2p-lc"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"OM2Pv2")
|
|
|
|
name="om2pv2"
|
|
|
|
;;
|
|
|
|
*"OM2Pv4")
|
|
|
|
name="om2pv4"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"OM5P")
|
2014-07-20 17:30:44 +00:00
|
|
|
name="om5p"
|
|
|
|
;;
|
2016-04-09 10:25:51 +00:00
|
|
|
*"OM5P AC")
|
|
|
|
name="om5p-ac"
|
|
|
|
;;
|
2016-04-09 10:26:18 +00:00
|
|
|
*"OM5P ACv2")
|
|
|
|
name="om5p-acv2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"OM5P AN")
|
|
|
|
name="om5p-an"
|
2016-03-16 09:26:58 +00:00
|
|
|
;;
|
2016-04-26 11:44:36 +00:00
|
|
|
*"OMY-G1")
|
|
|
|
name="omy-g1"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"OMY-X1")
|
|
|
|
name="omy-x1"
|
|
|
|
;;
|
2015-07-24 09:09:49 +00:00
|
|
|
*"Onion Omega")
|
|
|
|
name="onion-omega"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"Oolite V1.0")
|
2018-02-15 17:42:45 +00:00
|
|
|
name="oolite-v1"
|
2017-03-12 17:12:43 +00:00
|
|
|
;;
|
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:
- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel
WiFi Pineapple NANO specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button
LAN Turtle specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)
Packet Squirrel specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch
Flash instructions for all 3 devices:
Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.
Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-13 02:26:33 +00:00
|
|
|
*"Packet Squirrel")
|
|
|
|
name="packet-squirrel"
|
|
|
|
;;
|
2018-02-15 22:15:53 +00:00
|
|
|
*"Oolite V5.2")
|
|
|
|
name="oolite-v5.2"
|
|
|
|
;;
|
|
|
|
*"Oolite V5.2-Dev")
|
|
|
|
name="oolite-v5.2-dev"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"PB42")
|
2009-03-14 18:28:33 +00:00
|
|
|
name="pb42"
|
|
|
|
;;
|
2012-07-15 17:52:50 +00:00
|
|
|
*"PB44 reference board")
|
2009-05-20 08:23:48 +00:00
|
|
|
name="pb44"
|
|
|
|
;;
|
2017-01-10 09:47:19 +00:00
|
|
|
*"PQI Air Pen")
|
|
|
|
name="pqi-air-pen"
|
|
|
|
;;
|
2014-09-15 10:19:38 +00:00
|
|
|
*"Qihoo 360 C301")
|
|
|
|
name="qihoo-c301"
|
|
|
|
;;
|
ar71xx: add support for ALFA Network R36A
ALFA Network R36A is a successor of the previous model, the R36 (Ralink
RT3050F based). New version is based on Qualcomm/Atheros QCA9531 v2.
Specification:
- 650/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R (QCA9531) 2.4 GHz, 2x u.fl connectors on PCB
- 1x USB 2.0 (power controlled by GPIO)
- 6x LED (5 of them are driven by GPIO)
- 2x button (reset, wifi/wps)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- DC jack for main power input (12 V)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-12-28 10:07:54 +00:00
|
|
|
*"R36A")
|
|
|
|
name="r36a"
|
|
|
|
;;
|
ar71xx: add support for P&W R602N and CPE505N
P&W (full name: Shenzhen Progress&Win Technologies) R602N (could be also
labeled as R602F, R602, etc.) is a simple N300 router with 5-port
10/100 Mbps switch, non-detachable antennas and USB.
CPE505 is an outdoor CPE with PoE support and detachable antennas.
Both devices are based on Qualcomm/Atheros QCA9531 v2.
Common specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- UART (J2) header on PCB
R602N specification:
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 2T2R 2.4 GHz with external LNA and PA (SE2576L), up to 28 dBm
- 2x external, non-detachable antennas
- 7x LED, 1x button
CPE505N specification:
- 2x 10/100 Mbps Ethernet (both ports support passive PoE 12-24 V)
- 2T2R 2.4 GHz with external LNA and PA (SKY65174-21), up to 30 dBm
- 2x external, detachable antennas (RP-SMA connectors)
- 1x RGB LED, 2x LEDs (in RJ45 sockets), 1x button
Flash instructions:
It seems that there are many different versions of the firmware which
these devices are shipped with. The generic/standard one is based on
some modified OpenWrt and LEDE firmware can be flashed directly from
vendor's webgui or with sysupgrade (root password is "admin123").
Before flashing, make sure (use "fw_printenv") that the kernel load
address in your device is set to "0x9f050000" (bootcmd variable is
"bootm 0x9f050000"). If your device uses different load address, you
should first change it, under vendor's firmware, with command:
fw_setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
Where OLD_ADDRESS is previous kernel load address (in CPE505 version
I got access to, it was "0x9fe80000"). This will allow you to use
both the vendor's and LEDE firmware.
If version of your device contains empty U-Boot environment (you will
get information about this after issuing "fw_printenv"), you should
use U-Boot, serial line access and TFTP to perform firmware upgrade:
1. tftp 0x80060000 lede-ar71xx-generic-...-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
5. saveenv && reset
These devices contain also web recovery mode inside U-Boot. It can be
started with pressing the reset button for around 3 seconds just after
the device powerup. Web recovery panel is available on "192.168.10.9"
and to be able to use it, IP on your PC must be set to "192.168.10.10".
Make sure to change kernel load address before using recovery mode or
the U-Boot will not be able to load LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-15 23:54:08 +00:00
|
|
|
*"R602N")
|
|
|
|
name="r602n"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"R6100")
|
|
|
|
name="r6100"
|
|
|
|
;;
|
2017-05-08 10:28:38 +00:00
|
|
|
*"Rambutan"*)
|
|
|
|
name="rambutan"
|
|
|
|
;;
|
2018-02-06 21:08:28 +00:00
|
|
|
*"RE355")
|
|
|
|
name="re355"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"RE450")
|
|
|
|
name="re450"
|
|
|
|
;;
|
|
|
|
*"Rocket M")
|
|
|
|
name="rocket-m"
|
|
|
|
ubnt_xm_board_detect
|
|
|
|
;;
|
|
|
|
*"Rocket M TI")
|
|
|
|
name="rocket-m-ti"
|
|
|
|
;;
|
|
|
|
*"Rocket M XW")
|
|
|
|
name="rocket-m-xw"
|
|
|
|
;;
|
2017-03-28 01:55:48 +00:00
|
|
|
*"RouterBOARD 2011iL")
|
|
|
|
name="rb-2011il"
|
|
|
|
;;
|
2018-04-29 23:05:42 +00:00
|
|
|
*"RouterBOARD 2011iLS")
|
|
|
|
name="rb-2011ils"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"RouterBOARD 2011L")
|
|
|
|
name="rb-2011l"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 2011UAS")
|
|
|
|
name="rb-2011uas"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 2011UAS-2HnD")
|
|
|
|
name="rb-2011uas-2hnd"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 2011UiAS")
|
|
|
|
name="rb-2011uias"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 2011UiAS-2HnD")
|
|
|
|
name="rb-2011uias-2hnd"
|
2016-01-07 00:40:48 +00:00
|
|
|
;;
|
2010-03-05 20:29:24 +00:00
|
|
|
*"RouterBOARD 411/A/AH")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="rb-411"
|
|
|
|
;;
|
2010-03-05 20:29:24 +00:00
|
|
|
*"RouterBOARD 411U")
|
|
|
|
name="rb-411u"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 433/AH")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="rb-433"
|
|
|
|
;;
|
2010-03-05 20:29:24 +00:00
|
|
|
*"RouterBOARD 433UAH")
|
|
|
|
name="rb-433u"
|
|
|
|
;;
|
2012-11-18 10:18:02 +00:00
|
|
|
*"RouterBOARD 435G")
|
|
|
|
name="rb-435g"
|
|
|
|
;;
|
2010-03-05 20:29:24 +00:00
|
|
|
*"RouterBOARD 450")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="rb-450"
|
|
|
|
;;
|
2010-03-05 20:29:24 +00:00
|
|
|
*"RouterBOARD 450G")
|
|
|
|
name="rb-450g"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 493/AH")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="rb-493"
|
|
|
|
;;
|
2011-10-11 23:05:16 +00:00
|
|
|
*"RouterBOARD 493G")
|
|
|
|
name="rb-493g"
|
|
|
|
;;
|
2010-03-07 05:41:01 +00:00
|
|
|
*"RouterBOARD 750")
|
|
|
|
name="rb-750"
|
|
|
|
;;
|
2017-02-09 22:07:23 +00:00
|
|
|
*"RouterBOARD 750 r2")
|
|
|
|
name="rb-750-r2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"RouterBOARD 750GL")
|
|
|
|
name="rb-750gl"
|
|
|
|
;;
|
2017-10-05 12:26:23 +00:00
|
|
|
*"RouterBOARD 750P r2")
|
|
|
|
name="rb-750p-pbr2"
|
|
|
|
;;
|
2017-02-09 21:50:08 +00:00
|
|
|
*"RouterBOARD 750UP r2")
|
|
|
|
name="rb-750up-r2"
|
|
|
|
;;
|
2012-04-06 06:45:07 +00:00
|
|
|
*"RouterBOARD 751")
|
|
|
|
name="rb-751"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 751G")
|
|
|
|
name="rb-751g"
|
|
|
|
;;
|
2018-01-18 12:50:32 +00:00
|
|
|
*"RouterBOARD 911-2Hn")
|
|
|
|
name="rb-911-2hn"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 911-5Hn")
|
|
|
|
name="rb-911-5hn"
|
|
|
|
;;
|
2014-02-23 08:11:54 +00:00
|
|
|
*"RouterBOARD 911G-2HPnD")
|
|
|
|
name="rb-911g-2hpnd"
|
|
|
|
;;
|
2015-04-07 20:04:14 +00:00
|
|
|
*"RouterBOARD 911G-5HPacD")
|
|
|
|
name="rb-911g-5hpacd"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"RouterBOARD 911G-5HPnD")
|
|
|
|
name="rb-911g-5hpnd"
|
|
|
|
;;
|
2014-02-23 08:11:54 +00:00
|
|
|
*"RouterBOARD 912UAG-2HPnD")
|
|
|
|
name="rb-912uag-2hpnd"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD 912UAG-5HPnD")
|
|
|
|
name="rb-912uag-5hpnd"
|
|
|
|
;;
|
2017-12-21 14:53:05 +00:00
|
|
|
*"RouterBOARD 921GS-5HPacD r2")
|
|
|
|
name="rb-921gs-5hpacd-r2"
|
|
|
|
;;
|
2017-01-04 21:44:54 +00:00
|
|
|
*"RouterBOARD 941-2nD")
|
|
|
|
name="rb-941-2nd"
|
|
|
|
;;
|
2013-02-17 10:08:41 +00:00
|
|
|
*"RouterBOARD 951G-2HnD")
|
|
|
|
name="rb-951g-2hnd"
|
|
|
|
;;
|
2014-06-18 10:08:08 +00:00
|
|
|
*"RouterBOARD 951Ui-2HnD")
|
|
|
|
name="rb-951ui-2hnd"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"RouterBOARD 951Ui-2nD")
|
2017-02-07 18:10:04 +00:00
|
|
|
name="rb-951ui-2nd"
|
|
|
|
;;
|
2017-03-08 09:07:00 +00:00
|
|
|
*"RouterBOARD 952Ui-5ac2nD")
|
|
|
|
name="rb-952ui-5ac2nd"
|
|
|
|
;;
|
2017-03-17 04:00:33 +00:00
|
|
|
*"RouterBOARD 962UiGS-5HacT2HnT")
|
|
|
|
name="rb-962uigs-5hact2hnt"
|
|
|
|
;;
|
2017-03-06 22:06:13 +00:00
|
|
|
*"RouterBOARD LHG 5nD")
|
|
|
|
name="rb-lhg-5nd"
|
|
|
|
;;
|
2017-11-14 11:15:03 +00:00
|
|
|
*"RouterBOARD mAP 2nD")
|
|
|
|
name="rb-map-2nd"
|
|
|
|
;;
|
2017-02-07 11:06:33 +00:00
|
|
|
*"RouterBOARD mAP L-2nD")
|
|
|
|
name="rb-mapl-2nd"
|
|
|
|
;;
|
2014-07-01 13:38:30 +00:00
|
|
|
*"RouterBOARD SXT Lite2")
|
|
|
|
name="rb-sxt2n"
|
|
|
|
;;
|
|
|
|
*"RouterBOARD SXT Lite5")
|
|
|
|
name="rb-sxt5n"
|
|
|
|
;;
|
2017-10-28 10:30:39 +00:00
|
|
|
*"RouterBOARD wAP 2nD r2")
|
|
|
|
name="rb-wap-2nd"
|
|
|
|
;;
|
2018-01-08 11:55:05 +00:00
|
|
|
*"RouterBOARD wAP G-5HacT2HnD")
|
|
|
|
name="rb-wapg-5hact2hnd"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"RouterStation")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="routerstation"
|
|
|
|
;;
|
2009-10-20 19:36:47 +00:00
|
|
|
*"RouterStation Pro")
|
|
|
|
name="routerstation-pro"
|
|
|
|
;;
|
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-10-15 11:24:02 +00:00
|
|
|
*"RUT900")
|
|
|
|
name="rut900"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"RW2458N")
|
2012-01-06 07:20:59 +00:00
|
|
|
name="rw2458n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"SC1750")
|
2017-01-15 22:01:05 +00:00
|
|
|
name="sc1750"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"SC300M")
|
2017-01-15 22:01:03 +00:00
|
|
|
name="sc300m"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"SC450")
|
2017-01-15 22:01:04 +00:00
|
|
|
name="sc450"
|
|
|
|
;;
|
2014-08-11 11:44:51 +00:00
|
|
|
*"SMART-300")
|
|
|
|
name="smart-300"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"SOM9331")
|
2016-05-29 22:26:03 +00:00
|
|
|
name="som9331"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"SR3200")
|
ar71xx: add support for YunCore SR3200 and XD3200
YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9563+QCA9882+QCA8337N.
YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount
AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334.
Common specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB or RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm
- 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm
SR3200 specification:
- 5x 10/100/1000 Mbps Ethernet
- 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips)
- 3x LED (+ 5x LED in RJ45 sockets), 1x button
- UART header on PCB
XD3200 specification:
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
- 4x internal antennas
- 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button
- UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB
LED for 5 GHz WLAN is currently not supported on both devices as it is
connected directly to the QCA9882 radio chip.
Flash instruction under vendor firmware, using telnet/SSH:
1. If your firmware does not have root password, go to point 5
2. Connect PC with 192.168.1.x address to LAN or WAN port
3. Power up device, enter failsafe mode with button (no LED indicator!)
4. Change root password and reboot (mount_root, passwd ..., reboot -f)
5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP
6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
7. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
- mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware
Flash instruction under U-Boot, using UART:
1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-02 21:42:41 +00:00
|
|
|
name="sr3200"
|
|
|
|
;;
|
2018-02-16 19:30:38 +00:00
|
|
|
*"T830")
|
|
|
|
name="t830"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TellStick ZNet Lite")
|
|
|
|
name="tellstick-znet-lite"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TEW-632BRP")
|
2009-02-24 18:16:40 +00:00
|
|
|
name="tew-632brp"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TEW-673GRU")
|
2012-02-08 16:26:25 +00:00
|
|
|
name="tew-673gru"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TEW-712BR")
|
2012-08-22 20:12:24 +00:00
|
|
|
name="tew-712br"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TEW-732BR")
|
2013-09-23 09:49:02 +00:00
|
|
|
name="tew-732br"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TEW-823DRU")
|
2015-12-17 09:30:05 +00:00
|
|
|
name="tew-823dru"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-MR10U")
|
|
|
|
name="tl-mr10u"
|
2013-11-29 20:51:13 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-MR11U")
|
|
|
|
name="tl-mr11u"
|
2016-12-16 11:50:34 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-MR12U")
|
|
|
|
name="tl-mr12u"
|
2012-01-07 19:36:35 +00:00
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-MR13U v1")
|
|
|
|
name="tl-mr13u"
|
2009-12-18 12:57:01 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-MR3020")
|
2012-01-04 17:30:47 +00:00
|
|
|
name="tl-mr3020"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-MR3040")
|
2012-09-24 18:45:56 +00:00
|
|
|
name="tl-mr3040"
|
|
|
|
;;
|
2013-09-25 18:42:11 +00:00
|
|
|
*"TL-MR3040 v2")
|
|
|
|
name="tl-mr3040-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-MR3220")
|
2010-12-10 17:57:48 +00:00
|
|
|
name="tl-mr3220"
|
|
|
|
;;
|
2012-12-19 08:50:41 +00:00
|
|
|
*"TL-MR3220 v2")
|
|
|
|
name="tl-mr3220-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-MR3420")
|
2010-09-27 14:53:59 +00:00
|
|
|
name="tl-mr3420"
|
|
|
|
;;
|
2013-03-11 15:55:22 +00:00
|
|
|
*"TL-MR3420 v2")
|
|
|
|
name="tl-mr3420-v2"
|
|
|
|
;;
|
2017-10-24 08:58:39 +00:00
|
|
|
*"TL-MR6400")
|
2017-05-25 19:51:37 +00:00
|
|
|
name="tl-mr6400"
|
|
|
|
;;
|
2015-01-20 15:48:07 +00:00
|
|
|
*"TL-WA701ND v2")
|
|
|
|
name="tl-wa701nd-v2"
|
|
|
|
;;
|
2015-02-24 12:00:50 +00:00
|
|
|
*"TL-WA7210N v2")
|
|
|
|
name="tl-wa7210n-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WA750RE")
|
2013-11-11 08:04:47 +00:00
|
|
|
name="tl-wa750re"
|
|
|
|
;;
|
2014-06-02 14:45:21 +00:00
|
|
|
*"TL-WA7510N v1")
|
2012-11-13 14:48:01 +00:00
|
|
|
name="tl-wa7510n"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WA801ND v2")
|
|
|
|
name="tl-wa801nd-v2"
|
|
|
|
;;
|
|
|
|
*"TL-WA801ND v3")
|
|
|
|
name="tl-wa801nd-v3"
|
|
|
|
;;
|
|
|
|
*"TL-WA830RE v2")
|
|
|
|
name="tl-wa830re-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WA850RE")
|
2013-11-11 08:04:47 +00:00
|
|
|
name="tl-wa850re"
|
|
|
|
;;
|
2017-02-10 12:44:06 +00:00
|
|
|
*"TL-WA850RE v2")
|
|
|
|
name="tl-wa850re-v2"
|
|
|
|
;;
|
2017-06-09 15:11:39 +00:00
|
|
|
*"TL-WA855RE v1")
|
|
|
|
name="tl-wa855re-v1"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WA860RE")
|
2015-01-17 07:06:45 +00:00
|
|
|
name="tl-wa860re"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WA901ND")
|
2010-07-22 12:37:44 +00:00
|
|
|
name="tl-wa901nd"
|
|
|
|
;;
|
2011-03-13 15:08:31 +00:00
|
|
|
*"TL-WA901ND v2")
|
|
|
|
name="tl-wa901nd-v2"
|
|
|
|
;;
|
2013-12-15 21:34:19 +00:00
|
|
|
*"TL-WA901ND v3")
|
|
|
|
name="tl-wa901nd-v3"
|
|
|
|
;;
|
2016-04-09 10:26:46 +00:00
|
|
|
*"TL-WA901ND v4")
|
|
|
|
name="tl-wa901nd-v4"
|
|
|
|
;;
|
2017-10-22 20:39:30 +00:00
|
|
|
*"TL-WA901ND v5")
|
|
|
|
name="tl-wa901nd-v5"
|
|
|
|
;;
|
2015-09-14 20:12:16 +00:00
|
|
|
*"TL-WDR3320 v2")
|
|
|
|
name="tl-wdr3320-v2"
|
|
|
|
;;
|
2013-02-01 15:50:32 +00:00
|
|
|
*"TL-WDR3500")
|
|
|
|
name="tl-wdr3500"
|
|
|
|
;;
|
2012-08-22 09:43:18 +00:00
|
|
|
*"TL-WDR3600/4300/4310")
|
2012-06-19 11:51:18 +00:00
|
|
|
name="tl-wdr4300"
|
|
|
|
;;
|
2014-02-19 12:15:34 +00:00
|
|
|
*"TL-WDR4900 v2")
|
|
|
|
name="tl-wdr4900-v2"
|
|
|
|
;;
|
2015-08-17 06:24:04 +00:00
|
|
|
*"TL-WDR6500 v2")
|
|
|
|
name="tl-wdr6500-v2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WPA8630")
|
2016-11-07 14:37:25 +00:00
|
|
|
name="tl-wpa8630"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR1041N v2")
|
|
|
|
name="tl-wr1041n-v2"
|
|
|
|
;;
|
2017-09-25 09:38:49 +00:00
|
|
|
*"TL-WR1043N v5")
|
|
|
|
name="tl-wr1043n-v5"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR1043ND")
|
|
|
|
name="tl-wr1043nd"
|
|
|
|
;;
|
|
|
|
*"TL-WR1043ND v2")
|
|
|
|
name="tl-wr1043nd-v2"
|
|
|
|
;;
|
|
|
|
*"TL-WR1043ND v4")
|
|
|
|
name="tl-wr1043nd-v4"
|
|
|
|
;;
|
|
|
|
*"TL-WR2543N"*)
|
|
|
|
name="tl-wr2543n"
|
|
|
|
;;
|
|
|
|
*"TL-WR703N v1")
|
|
|
|
name="tl-wr703n"
|
|
|
|
;;
|
|
|
|
*"TL-WR710N v1")
|
|
|
|
name="tl-wr710n"
|
|
|
|
;;
|
|
|
|
*"TL-WR720N"*)
|
|
|
|
name="tl-wr720n-v3"
|
|
|
|
;;
|
2017-05-11 18:26:21 +00:00
|
|
|
*"TL-WR740N/ND v6")
|
|
|
|
name="tl-wr740n-v6"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"TL-WR741ND")
|
2009-07-25 19:50:26 +00:00
|
|
|
name="tl-wr741nd"
|
|
|
|
;;
|
2011-11-01 11:20:52 +00:00
|
|
|
*"TL-WR741ND v4")
|
|
|
|
name="tl-wr741nd-v4"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR802N v1")
|
|
|
|
name="tl-wr802n-v1"
|
|
|
|
;;
|
|
|
|
*"TL-WR802N v2")
|
|
|
|
name="tl-wr802n-v2"
|
|
|
|
;;
|
|
|
|
*"TL-WR810N")
|
|
|
|
name="tl-wr810n"
|
|
|
|
;;
|
2017-11-10 21:18:09 +00:00
|
|
|
*"TL-WR810N v2")
|
|
|
|
name="tl-wr810n-v2"
|
|
|
|
;;
|
2017-03-16 00:43:43 +00:00
|
|
|
*"TL-WR840N v2")
|
|
|
|
name="tl-wr840n-v2"
|
|
|
|
;;
|
|
|
|
*"TL-WR840N v3")
|
|
|
|
name="tl-wr840n-v3"
|
|
|
|
;;
|
2009-12-22 19:31:28 +00:00
|
|
|
*"TL-WR841N v1")
|
|
|
|
name="tl-wr841n-v1"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR841N/ND v11")
|
|
|
|
name="tl-wr841n-v11"
|
|
|
|
;;
|
2012-01-04 17:30:57 +00:00
|
|
|
*"TL-WR841N/ND v7")
|
|
|
|
name="tl-wr841n-v7"
|
|
|
|
;;
|
2012-10-04 20:16:05 +00:00
|
|
|
*"TL-WR841N/ND v8")
|
|
|
|
name="tl-wr841n-v8"
|
|
|
|
;;
|
2014-04-07 08:00:02 +00:00
|
|
|
*"TL-WR841N/ND v9")
|
|
|
|
name="tl-wr841n-v9"
|
|
|
|
;;
|
2013-11-15 10:11:24 +00:00
|
|
|
*"TL-WR842N/ND v2")
|
|
|
|
name="tl-wr842n-v2"
|
|
|
|
;;
|
2016-05-14 16:12:46 +00:00
|
|
|
*"TL-WR842N/ND v3")
|
|
|
|
name="tl-wr842n-v3"
|
|
|
|
;;
|
ar71xx: add support for TP-Link TL-WR902AC v1
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of
TL-MR3020 (both devices use very similar enclosure, in same size). New
device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (GPIO-controlled power)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch
- UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper
resitors are missing on TX/RX lines)
- 1x micro USB (for power only)
Flash instructions:
Use "factory" image under vendor GUI.
Recovery instructions:
This device contains tftp recovery mode inside U-Boot. You can use it to
flash LEDE (use "factory" image) or vendor firmware.
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "lede-ar71xx-generic-tl-wr902ac-v1-squashfs-factory.bin"
to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir.
3. Connect PC with LAN port, press the reset button, power up the router
and keep button pressed until WPS LED lights up.
4. Router will download file from server, write it to flash and reboot.
Root access over serial line in vendor firmware: root/sohoadmin.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-02 16:32:38 +00:00
|
|
|
*"TL-WR902AC v1")
|
|
|
|
name="tl-wr902ac-v1"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR940N v4")
|
|
|
|
name="tl-wr940n-v4"
|
2009-02-24 18:16:40 +00:00
|
|
|
;;
|
2018-02-21 12:15:17 +00:00
|
|
|
*"TL-WR940N v6")
|
|
|
|
name="tl-wr940n-v6"
|
|
|
|
;;
|
2015-02-04 06:10:20 +00:00
|
|
|
*"TL-WR941N/ND v5")
|
|
|
|
name="tl-wr941nd-v5"
|
|
|
|
;;
|
2015-11-08 20:39:18 +00:00
|
|
|
*"TL-WR941N/ND v6")
|
|
|
|
name="tl-wr941nd-v6"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"TL-WR941ND")
|
|
|
|
name="tl-wr941nd"
|
2013-09-19 17:52:42 +00:00
|
|
|
;;
|
2017-03-08 20:10:05 +00:00
|
|
|
*"TL-WR942N v1")
|
|
|
|
name="tl-wr942n-v1"
|
|
|
|
;;
|
2018-04-22 10:29:36 +00:00
|
|
|
*"TS-D084")
|
|
|
|
name="ts-d084"
|
|
|
|
;;
|
2014-07-14 16:03:35 +00:00
|
|
|
*"Tube2H")
|
|
|
|
name="tube2h"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"UniFi")
|
2010-12-20 17:28:34 +00:00
|
|
|
name="unifi"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"UniFi AP Pro")
|
|
|
|
name="uap-pro"
|
|
|
|
;;
|
2017-03-29 11:38:25 +00:00
|
|
|
*"UniFi-AC-LITE/MESH")
|
2016-05-11 07:35:24 +00:00
|
|
|
name="unifiac-lite"
|
2018-02-25 11:09:38 +00:00
|
|
|
ubnt_ac_lite_board_detect
|
2016-02-12 08:31:32 +00:00
|
|
|
;;
|
2016-05-11 07:40:00 +00:00
|
|
|
*"UniFi-AC-PRO")
|
|
|
|
name="unifiac-pro"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"UniFiAP Outdoor")
|
|
|
|
name="unifi-outdoor"
|
|
|
|
;;
|
|
|
|
*"UniFiAP Outdoor+")
|
|
|
|
name="unifi-outdoor-plus"
|
|
|
|
;;
|
ar71xx: add support for Samsung WAM250
Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless
hub, dedicated for Samsung Shape Wireless Audio System. The device is
based on Atheros AR9344. FCC ID: A3LWAM250.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet
- 2T2R 2.4/5 GHz (AR9344), with ext. PA (SE2598L, SE5003L) and LNA
- 1x USB 2.0
- 4x LED (all are driven by GPIO)
- 2x button (reset, wps/speaker add)
- DC jack for main power input (14 V)
- UART header on PCB (J4, RX: 3, TX: 5)
Flash instruction:
This device uses dual-image (switched between upgrades) with a common
jffs2 config partition. Fortunately, there is a way to disable this mode
so that more flash space can be used by OpenWrt image.
You can easily access this device over telnet, using root/root
credentials (the same also work for serial console access).
1. Make sure that your device uses second (bootpart=2) image using
command: "fw_printenv bootpart".
2. If your device uses first image (bootpart=1), perform upgrade to the
latest vendor firmware (after the update, device should boot from
second partition) using web gui (default login: admin/1234567890).
3. Rename "sysupgrade" image to "firmware.bin", download it (you can use
wget, tftp or ftpget) to "/tmp" and issue below commands:
mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}')
mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin)
fw_setenv bootpart
fw_setenv bootcmd "bootm 0x9f070000"
reboot
Revert to vendor firmware instruction:
1. Download vendor firmware to "/tmp" device and issue below commands:
fw_setenv bootpart 1
sysupgrade -n -F SS_BHUB_v2.2.05.bin
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-08 21:28:07 +00:00
|
|
|
*"WAM250")
|
|
|
|
name="wam250"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WBS210")
|
|
|
|
name="wbs210"
|
|
|
|
tplink_pharos_board_detect
|
|
|
|
;;
|
|
|
|
*"WBS510")
|
|
|
|
name="wbs510"
|
|
|
|
tplink_pharos_board_detect
|
2012-12-17 12:28:11 +00:00
|
|
|
;;
|
2015-10-05 10:25:40 +00:00
|
|
|
"WeIO"*)
|
2015-09-24 09:08:47 +00:00
|
|
|
name="weio"
|
|
|
|
;;
|
2017-06-27 21:26:03 +00:00
|
|
|
*"WI2A-AC200i")
|
|
|
|
name="wi2a-ac200i"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WHR-G301N")
|
2011-11-07 12:59:07 +00:00
|
|
|
name="whr-g301n"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WHR-HP-G300N")
|
|
|
|
name="whr-hp-g300n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WHR-HP-GN")
|
2011-11-07 12:59:10 +00:00
|
|
|
name="whr-hp-gn"
|
|
|
|
;;
|
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:
- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel
WiFi Pineapple NANO specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button
LAN Turtle specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)
Packet Squirrel specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch
Flash instructions for all 3 devices:
Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.
Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-13 02:26:33 +00:00
|
|
|
*"WiFi Pineapple NANO")
|
|
|
|
name="wifi-pineapple-nano"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WLAE-AG300N")
|
2012-08-01 12:24:52 +00:00
|
|
|
name="wlae-ag300n"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WLR-8100")
|
|
|
|
name="wlr8100"
|
2015-03-06 14:41:57 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WNDAP360")
|
2013-05-08 17:03:42 +00:00
|
|
|
name="wndap360"
|
|
|
|
;;
|
2011-12-13 14:59:40 +00:00
|
|
|
*"WNDR3700/WNDR3800/WNDRMAC")
|
2011-12-05 13:03:54 +00:00
|
|
|
wndr3700_board_detect "$machine"
|
2011-11-24 20:09:38 +00:00
|
|
|
;;
|
2014-07-21 18:41:52 +00:00
|
|
|
*"WNDR3700v4")
|
|
|
|
name="wndr3700v4"
|
|
|
|
;;
|
2012-12-12 16:49:51 +00:00
|
|
|
*"WNDR4300")
|
|
|
|
name="wndr4300"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WNR1000 V2")
|
|
|
|
name="wnr1000-v2"
|
|
|
|
;;
|
|
|
|
*"WNR2000")
|
|
|
|
name="wnr2000"
|
2014-11-03 20:20:56 +00:00
|
|
|
;;
|
2013-04-26 17:00:54 +00:00
|
|
|
*"WNR2000 V3")
|
|
|
|
name="wnr2000-v3"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WNR2000 V4")
|
|
|
|
name="wnr2000-v4"
|
2009-02-26 05:54:32 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WNR2200")
|
2013-09-19 16:56:50 +00:00
|
|
|
name="wnr2200"
|
|
|
|
;;
|
2013-07-28 10:23:37 +00:00
|
|
|
*"WNR612 V2")
|
|
|
|
name="wnr612-v2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WP543")
|
|
|
|
name="wp543"
|
|
|
|
;;
|
|
|
|
*"WPE72")
|
|
|
|
name="wpe72"
|
|
|
|
;;
|
|
|
|
*"WPJ342")
|
|
|
|
name="wpj342"
|
|
|
|
;;
|
|
|
|
*"WPJ344")
|
|
|
|
name="wpj344"
|
|
|
|
;;
|
|
|
|
*"WPJ531")
|
|
|
|
name="wpj531"
|
|
|
|
;;
|
|
|
|
*"WPJ558")
|
|
|
|
name="wpj558"
|
2015-01-30 08:06:40 +00:00
|
|
|
;;
|
2017-02-26 11:25:57 +00:00
|
|
|
*"WPJ563")
|
|
|
|
name="wpj563"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WPN824N")
|
2016-01-19 10:16:04 +00:00
|
|
|
name="wpn824n"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WRT160NL")
|
2009-05-25 18:36:49 +00:00
|
|
|
name="wrt160nl"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WRT400N")
|
2009-04-26 06:40:02 +00:00
|
|
|
name="wrt400n"
|
|
|
|
;;
|
2017-03-11 16:44:05 +00:00
|
|
|
*"WRTnode2Q"*)
|
2016-05-31 16:32:37 +00:00
|
|
|
name="wrtnode2q"
|
|
|
|
;;
|
2014-10-22 11:02:18 +00:00
|
|
|
*"WZR-450HP2")
|
|
|
|
name="wzr-450hp2"
|
|
|
|
;;
|
2013-03-03 21:59:34 +00:00
|
|
|
*"WZR-HP-AG300H/WZR-600DHP")
|
2011-06-25 13:54:42 +00:00
|
|
|
name="wzr-hp-ag300h"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WZR-HP-G300NH")
|
2010-01-15 12:11:05 +00:00
|
|
|
name="wzr-hp-g300nh"
|
2010-01-15 12:08:03 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"WZR-HP-G300NH2")
|
2011-12-18 22:20:17 +00:00
|
|
|
name="wzr-hp-g300nh2"
|
|
|
|
;;
|
2017-03-12 17:12:43 +00:00
|
|
|
*"WZR-HP-G450H")
|
|
|
|
name="wzr-hp-g450h"
|
2011-10-24 21:49:26 +00:00
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"XD3200")
|
ar71xx: add support for YunCore SR3200 and XD3200
YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9563+QCA9882+QCA8337N.
YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount
AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334.
Common specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB or RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm
- 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm
SR3200 specification:
- 5x 10/100/1000 Mbps Ethernet
- 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips)
- 3x LED (+ 5x LED in RJ45 sockets), 1x button
- UART header on PCB
XD3200 specification:
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
- 4x internal antennas
- 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button
- UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB
LED for 5 GHz WLAN is currently not supported on both devices as it is
connected directly to the QCA9882 radio chip.
Flash instruction under vendor firmware, using telnet/SSH:
1. If your firmware does not have root password, go to point 5
2. Connect PC with 192.168.1.x address to LAN or WAN port
3. Power up device, enter failsafe mode with button (no LED indicator!)
4. Change root password and reboot (mount_root, passwd ..., reboot -f)
5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP
6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
7. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
- mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware
Flash instruction under U-Boot, using UART:
1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-02 21:42:41 +00:00
|
|
|
name="xd3200"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"Z1")
|
2016-09-20 12:14:29 +00:00
|
|
|
name="z1"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ZBT-WE1526")
|
2016-08-17 22:05:03 +00:00
|
|
|
name="zbt-we1526"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ZCN-1523H-2")
|
2010-09-03 18:14:37 +00:00
|
|
|
name="zcn-1523h-2"
|
|
|
|
;;
|
2017-03-10 22:12:25 +00:00
|
|
|
*"ZCN-1523H-5")
|
2010-09-03 18:14:37 +00:00
|
|
|
name="zcn-1523h-5"
|
|
|
|
;;
|
2009-02-24 18:16:40 +00:00
|
|
|
esac
|
|
|
|
|
2014-11-26 08:59:32 +00:00
|
|
|
[ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
|
|
|
|
tplink_board_detect "$machine"
|
2011-12-05 21:11:01 +00:00
|
|
|
|
2011-12-05 12:56:20 +00:00
|
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
|
|
|
|
[ -z "$AR71XX_BOARD_NAME" ] && AR71XX_BOARD_NAME="$name"
|
|
|
|
[ -z "$AR71XX_MODEL" ] && AR71XX_MODEL="$machine"
|
|
|
|
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
|
|
|
|
echo "$AR71XX_BOARD_NAME" > /tmp/sysinfo/board_name
|
|
|
|
echo "$AR71XX_MODEL" > /tmp/sysinfo/model
|
|
|
|
}
|