hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/arc770/config-4.4

170 lines
4.5 KiB
Groff
Raw Normal View History

linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
# CONFIG_16KSTACKS is not set
CONFIG_ARC=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
# CONFIG_ARCH_HAS_SG_CHAIN is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARC_BUILTIN_DTB_NAME=""
CONFIG_ARC_CACHE=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
CONFIG_ARC_CACHE_PAGES=y
# CONFIG_ARC_CACHE_VIPT_ALIASING is not set
# CONFIG_ARC_CANT_LLSC is not set
# CONFIG_ARC_COMPACT_IRQ_LEVELS is not set
# CONFIG_ARC_CPU_750D is not set
CONFIG_ARC_CPU_770=y
CONFIG_ARC_CURR_IN_REG=y
CONFIG_ARC_DBG=y
# CONFIG_ARC_DBG_TLB_MISS_COUNT is not set
# CONFIG_ARC_DBG_TLB_PARANOIA is not set
CONFIG_ARC_DW2_UNWIND=y
# CONFIG_ARC_EMUL_UNALIGNED is not set
# CONFIG_ARC_FPU_SAVE_RESTORE is not set
CONFIG_ARC_HAS_DCACHE=y
# CONFIG_ARC_HAS_DCCM is not set
CONFIG_ARC_HAS_HW_MPY=y
CONFIG_ARC_HAS_ICACHE=y
# CONFIG_ARC_HAS_ICCM is not set
CONFIG_ARC_HAS_LLSC=y
CONFIG_ARC_HAS_SWAPE=y
# CONFIG_ARC_METAWARE_HLINK is not set
# CONFIG_ARC_MMU_V1 is not set
# CONFIG_ARC_MMU_V2 is not set
CONFIG_ARC_MMU_V3=y
# CONFIG_ARC_PAGE_SIZE_16K is not set
# CONFIG_ARC_PAGE_SIZE_4K is not set
CONFIG_ARC_PAGE_SIZE_8K=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_ARC_PLAT_SIM=y
# CONFIG_ARC_PLAT_TB10X is not set
# CONFIG_ARC_UBOOT_SUPPORT is not set
CONFIG_AXS101=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DTC=y
CONFIG_DWMAC_GENERIC=y
# CONFIG_DWMAC_SUNXI is not set
CONFIG_DW_APB_ICTL=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
# CONFIG_GEN_RTC is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_WORK=y
CONFIG_ISA_ARCOMPACT=y
# CONFIG_ISA_ARCV2 is not set
CONFIG_KALLSYMS=y
CONFIG_LIBFDT=y
CONFIG_LINUX_LINK_BASE=0x80000000
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_K3 is not set
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_NATIONAL_PHY=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_NET_CADENCE is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NO_BOOTMEM=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PPS=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PTP_1588_CLOCK=y
arc770: bump linux kernel from 4.3 to 4.4 This switch involved: [1] Regeneration of config (few options went away) [2] Regeneration of patches so they apply cleanly (different offsets) [3] Update of .dts files because we now explicitly specify memory regions in use as opposed to previously used offset from 0x8000_0000 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48240
2016-01-15 10:49:01 +00:00
CONFIG_RATIONAL=y
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RTC is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_DW=y
arc770: bump linux kernel from 4.3 to 4.4 This switch involved: [1] Regeneration of config (few options went away) [2] Regeneration of patches so they apply cleanly (different offsets) [3] Update of .dts files because we now explicitly specify memory regions in use as opposed to previously used offset from 0x8000_0000 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48240
2016-01-15 10:49:01 +00:00
# CONFIG_SERIAL_8250_FSL is not set
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SRCU=y
CONFIG_STACKTRACE=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
# CONFIG_SUNXI_SRAM is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB_SUPPORT=y
CONFIG_ZONE_DMA_FLAG=0