hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/oxnas/Makefile

21 lines
404 B
Makefile
Raw Normal View History

oxnas: bring in new oxnas target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-31 17:41:28 +00:00
include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=oxnas
BOARDNAME:=PLXTECH/Oxford NAS782x/OX8xx
SUBTARGETS:=ox810se ox820
FEATURES:=gpio ramdisk rtc squashfs
DEVICE_TYPE:=nas
oxnas: switch to kernel 5.4 and remove kernel 4.14 Run-tested 5.4 on Shuttle KD20 for some days now, everything seems fine so far. Let's have snapshot builds based on 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-03-12 09:25:21 +00:00
KERNEL_PATCHVER:=5.4
oxnas: bring in new oxnas target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-31 17:41:28 +00:00
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-button-hotplug kmod-input-gpio-keys-polled \
kmod-ledtrig-timer kmod-leds-gpio uboot-envtools
KERNELNAME:=zImage dtbs
$(eval $(call BuildTarget))